arch/blackfin/kernel/time.c

   1 /*
   2  * arch/blackfin/kernel/time.c
   3  *
   4  * This file contains the Blackfin-specific time handling details.
   5  * Most of the stuff is located in the machine specific files.
   6  *
   7  * Copyright 2004-2008 Analog Devices Inc.
   8  * Licensed under the GPL-2 or later.
   9  */
  10
  11 #include <linux/module.h>
  12 #include <linux/profile.h>
  13 #include <linux/interrupt.h>
  14 #include <linux/time.h>
  15 #include <linux/irq.h>
  16 #include <linux/delay.h>
  17 #include <linux/sched.h>
  18
  19 #include <asm/blackfin.h>
  20 #include <asm/time.h>
  21 #include <asm/gptimers.h>
  22
  23 /* This is an NTP setting */
  24 #define TICK_SIZE (tick_nsec / 1000)
  25
  26 static struct irqaction bfin_timer_irq = {
  27         .name = "Blackfin Timer Tick",
  28         .flags = IRQF_DISABLED
  29 };
  30
  31 #if defined(CONFIG_IPIPE)
  32 void __init setup_system_timer0(void)
  33 {
  34         /* Power down the core timer, just to play safe. */
  35         bfin_write_TCNTL(0);
  36
  37         disable_gptimers(TIMER0bit);
  38         set_gptimer_status(0, TIMER_STATUS_TRUN0);
  39         while (get_gptimer_status(0) & TIMER_STATUS_TRUN0)
  40                 udelay(10);
  41
  42         set_gptimer_config(0, 0x59); /* IRQ enable, periodic, PWM_OUT, SCLKed, OUT PAD disabled */
  43         set_gptimer_period(TIMER0_id, get_sclk() / HZ);
  44         set_gptimer_pwidth(TIMER0_id, 1);
  45         SSYNC();
  46         enable_gptimers(TIMER0bit);
  47 }
  48 #else
  49 void __init setup_core_timer(void)
  50 {
  51         u32 tcount;
  52
  53         /* power up the timer, but don't enable it just yet */
  54         bfin_write_TCNTL(TMPWR);
  55         CSYNC();
  56
  57         /* the TSCALE prescaler counter */
  58         bfin_write_TSCALE(TIME_SCALE - 1);
  59
  60         tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1);
  61         bfin_write_TPERIOD(tcount);
  62         bfin_write_TCOUNT(tcount);
  63
  64         /* now enable the timer */
  65         CSYNC();
  66
  67         bfin_write_TCNTL(TAUTORLD | TMREN | TMPWR);
  68 }
  69 #endif
  70
  71 static void __init
  72 time_sched_init(irqreturn_t(*timer_routine) (int, void *))
  73 {
  74 #if defined(CONFIG_IPIPE)
  75         setup_system_timer0();
  76         bfin_timer_irq.handler = timer_routine;
  77         setup_irq(IRQ_TIMER0, &bfin_timer_irq);
  78 #else
  79         setup_core_timer();
  80         bfin_timer_irq.handler = timer_routine;
  81         setup_irq(IRQ_CORETMR, &bfin_timer_irq);
  82 #endif
  83 }
  84
  85 #ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
  86 /*
  87  * Should return useconds since last timer tick
  88  */
  89 u32 arch_gettimeoffset(void)
  90 {
  91         unsigned long offset;
  92         unsigned long clocks_per_jiffy;
  93
  94 #if defined(CONFIG_IPIPE)
  95         clocks_per_jiffy = bfin_read_TIMER0_PERIOD();
  96         offset = bfin_read_TIMER0_COUNTER() / \
  97                 (((clocks_per_jiffy + 1) * HZ) / USEC_PER_SEC);
  98
  99         if ((get_gptimer_status(0) & TIMER_STATUS_TIMIL0) && offset < (100000 / HZ / 2))
 100                 offset += (USEC_PER_SEC / HZ);
 101 #else
 102         clocks_per_jiffy = bfin_read_TPERIOD();
 103         offset = (clocks_per_jiffy - bfin_read_TCOUNT()) / \
 104                 (((clocks_per_jiffy + 1) * HZ) / USEC_PER_SEC);
 105
 106         /* Check if we just wrapped the counters and maybe missed a tick */
 107         if ((bfin_read_ILAT() & (1 << IRQ_CORETMR))
 108                 && (offset < (100000 / HZ / 2)))
 109                 offset += (USEC_PER_SEC / HZ);
 110 #endif
 111         return offset;
 112 }
 113 #endif
 114
 115 /*
 116  * timer_interrupt() needs to keep up the real-time clock,
 117  * as well as call the "xtime_update()" routine every clocktick
 118  */
 119 #ifdef CONFIG_CORE_TIMER_IRQ_L1
 120 __attribute__((l1_text))
 121 #endif
 122 irqreturn_t timer_interrupt(int irq, void *dummy)
 123 {
 124         xtime_update(1);
 125
 126 #ifdef CONFIG_IPIPE
 127         update_root_process_times(get_irq_regs());
 128 #else
 129         update_process_times(user_mode(get_irq_regs()));
 130 #endif
 131         profile_tick(CPU_PROFILING);
 132
 133         return IRQ_HANDLED;
 134 }
 135
 136 void read_persistent_clock(struct timespec *ts)
 137 {
 138         time_t secs_since_1970 = (365 * 37 + 9) * 24 * 60 * 60; /* 1 Jan 2007 */
 139         ts->tv_sec = secs_since_1970;
 140         ts->tv_nsec = 0;
 141 }
 142
 143 void __init time_init(void)
 144 {
 145 #ifdef CONFIG_RTC_DRV_BFIN
 146         /* [#2663] hack to filter junk RTC values that would cause
 147          * userspace to have to deal with time values greater than
 148          * 2^31 seconds (which uClibc cannot cope with yet)
 149          */
 150         if ((bfin_read_RTC_STAT() & 0xC0000000) == 0xC0000000) {
 151                 printk(KERN_NOTICE "bfin-rtc: invalid date; resetting\n");
 152                 bfin_write_RTC_STAT(0);
 153         }
 154 #endif
 155
 156         time_sched_init(timer_interrupt);
 157 }