Merge branch 'akpm'
[linux-2.6/next.git] / arch / powerpc / platforms / 85xx / mpc85xx_ads.c
blob3b2c9bb661998918f3ac1033fc4a19311ca910b2
1 /*
2 * MPC85xx setup and early boot code plus other random bits.
4 * Maintained by Kumar Gala (see MAINTAINERS for contact information)
6 * Copyright 2005 Freescale Semiconductor Inc.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
14 #include <linux/stddef.h>
15 #include <linux/kernel.h>
16 #include <linux/pci.h>
17 #include <linux/kdev_t.h>
18 #include <linux/delay.h>
19 #include <linux/seq_file.h>
20 #include <linux/of_platform.h>
22 #include <asm/system.h>
23 #include <asm/time.h>
24 #include <asm/machdep.h>
25 #include <asm/pci-bridge.h>
26 #include <asm/mpic.h>
27 #include <mm/mmu_decl.h>
28 #include <asm/udbg.h>
30 #include <sysdev/fsl_soc.h>
31 #include <sysdev/fsl_pci.h>
33 #ifdef CONFIG_CPM2
34 #include <asm/cpm2.h>
35 #include <sysdev/cpm2_pic.h>
36 #endif
38 #ifdef CONFIG_PCI
39 static int mpc85xx_exclude_device(struct pci_controller *hose,
40 u_char bus, u_char devfn)
42 if (bus == 0 && PCI_SLOT(devfn) == 0)
43 return PCIBIOS_DEVICE_NOT_FOUND;
44 else
45 return PCIBIOS_SUCCESSFUL;
47 #endif /* CONFIG_PCI */
49 #ifdef CONFIG_CPM2
51 static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
53 struct irq_chip *chip = irq_desc_get_chip(desc);
54 int cascade_irq;
56 while ((cascade_irq = cpm2_get_irq()) >= 0)
57 generic_handle_irq(cascade_irq);
59 chip->irq_eoi(&desc->irq_data);
62 #endif /* CONFIG_CPM2 */
64 static void __init mpc85xx_ads_pic_init(void)
66 struct mpic *mpic;
67 struct resource r;
68 struct device_node *np = NULL;
69 #ifdef CONFIG_CPM2
70 int irq;
71 #endif
73 np = of_find_node_by_type(np, "open-pic");
74 if (!np) {
75 printk(KERN_ERR "Could not find open-pic node\n");
76 return;
79 if (of_address_to_resource(np, 0, &r)) {
80 printk(KERN_ERR "Could not map mpic register space\n");
81 of_node_put(np);
82 return;
85 mpic = mpic_alloc(np, r.start,
86 MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
87 0, 256, " OpenPIC ");
88 BUG_ON(mpic == NULL);
89 of_node_put(np);
91 mpic_init(mpic);
93 #ifdef CONFIG_CPM2
94 /* Setup CPM2 PIC */
95 np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
96 if (np == NULL) {
97 printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
98 return;
100 irq = irq_of_parse_and_map(np, 0);
102 cpm2_pic_init(np);
103 of_node_put(np);
104 irq_set_chained_handler(irq, cpm2_cascade);
105 #endif
109 * Setup the architecture
111 #ifdef CONFIG_CPM2
112 struct cpm_pin {
113 int port, pin, flags;
116 static const struct cpm_pin mpc8560_ads_pins[] = {
117 /* SCC1 */
118 {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
119 {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
120 {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
122 /* SCC2 */
123 {2, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
124 {2, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
125 {3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
126 {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
127 {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
129 /* FCC2 */
130 {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
131 {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
132 {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
133 {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
134 {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
135 {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
136 {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
137 {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
138 {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
139 {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
140 {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
141 {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
142 {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
143 {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
144 {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK14 */
145 {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK13 */
147 /* FCC3 */
148 {1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
149 {1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
150 {1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
151 {1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
152 {1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
153 {1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
154 {1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
155 {1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
156 {1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
157 {1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
158 {1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
159 {1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
160 {1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
161 {2, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK16 */
162 {2, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK15 */
163 {2, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
166 static void __init init_ioports(void)
168 int i;
170 for (i = 0; i < ARRAY_SIZE(mpc8560_ads_pins); i++) {
171 const struct cpm_pin *pin = &mpc8560_ads_pins[i];
172 cpm2_set_pin(pin->port, pin->pin, pin->flags);
175 cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
176 cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
177 cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
178 cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
179 cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
180 cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
181 cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX);
182 cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX);
184 #endif
186 static void __init mpc85xx_ads_setup_arch(void)
188 #ifdef CONFIG_PCI
189 struct device_node *np;
190 #endif
192 if (ppc_md.progress)
193 ppc_md.progress("mpc85xx_ads_setup_arch()", 0);
195 #ifdef CONFIG_CPM2
196 cpm2_reset();
197 init_ioports();
198 #endif
200 #ifdef CONFIG_PCI
201 for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
202 fsl_add_bridge(np, 1);
204 ppc_md.pci_exclude_device = mpc85xx_exclude_device;
205 #endif
208 static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
210 uint pvid, svid, phid1;
212 pvid = mfspr(SPRN_PVR);
213 svid = mfspr(SPRN_SVR);
215 seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
216 seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
217 seq_printf(m, "SVR\t\t: 0x%x\n", svid);
219 /* Display cpu Pll setting */
220 phid1 = mfspr(SPRN_HID1);
221 seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
224 static struct of_device_id __initdata of_bus_ids[] = {
225 { .name = "soc", },
226 { .type = "soc", },
227 { .name = "cpm", },
228 { .name = "localbus", },
229 { .compatible = "simple-bus", },
230 { .compatible = "gianfar", },
234 static int __init declare_of_platform_devices(void)
236 of_platform_bus_probe(NULL, of_bus_ids, NULL);
238 return 0;
240 machine_device_initcall(mpc85xx_ads, declare_of_platform_devices);
243 * Called very early, device-tree isn't unflattened
245 static int __init mpc85xx_ads_probe(void)
247 unsigned long root = of_get_flat_dt_root();
249 return of_flat_dt_is_compatible(root, "MPC85xxADS");
252 define_machine(mpc85xx_ads) {
253 .name = "MPC85xx ADS",
254 .probe = mpc85xx_ads_probe,
255 .setup_arch = mpc85xx_ads_setup_arch,
256 .init_IRQ = mpc85xx_ads_pic_init,
257 .show_cpuinfo = mpc85xx_ads_show_cpuinfo,
258 .get_irq = mpic_get_irq,
259 .restart = fsl_rstcr_restart,
260 .calibrate_decr = generic_calibrate_decr,
261 .progress = udbg_progress,