Merge branch 'akpm'
[linux-2.6/next.git] / drivers / regulator / lp3971.c
blob72b16b5f3db6fca2f7a2ded2ce55344256ba327f
1 /*
2 * Regulator driver for National Semiconductors LP3971 PMIC chip
4 * Copyright (C) 2009 Samsung Electronics
5 * Author: Marek Szyprowski <m.szyprowski@samsung.com>
7 * Based on wm8350.c
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
15 #include <linux/bug.h>
16 #include <linux/err.h>
17 #include <linux/i2c.h>
18 #include <linux/kernel.h>
19 #include <linux/module.h>
20 #include <linux/regulator/driver.h>
21 #include <linux/regulator/lp3971.h>
22 #include <linux/slab.h>
24 struct lp3971 {
25 struct device *dev;
26 struct mutex io_lock;
27 struct i2c_client *i2c;
28 int num_regulators;
29 struct regulator_dev **rdev;
32 static u8 lp3971_reg_read(struct lp3971 *lp3971, u8 reg);
33 static int lp3971_set_bits(struct lp3971 *lp3971, u8 reg, u16 mask, u16 val);
35 #define LP3971_SYS_CONTROL1_REG 0x07
37 /* System control register 1 initial value,
38 bits 4 and 5 are EPROM programmable */
39 #define SYS_CONTROL1_INIT_VAL 0x40
40 #define SYS_CONTROL1_INIT_MASK 0xCF
42 #define LP3971_BUCK_VOL_ENABLE_REG 0x10
43 #define LP3971_BUCK_VOL_CHANGE_REG 0x20
45 /* Voltage control registers shift:
46 LP3971_BUCK1 -> 0
47 LP3971_BUCK2 -> 4
48 LP3971_BUCK3 -> 6
50 #define BUCK_VOL_CHANGE_SHIFT(x) (((!!x) << 2) | (x & ~0x01))
51 #define BUCK_VOL_CHANGE_FLAG_GO 0x01
52 #define BUCK_VOL_CHANGE_FLAG_TARGET 0x02
53 #define BUCK_VOL_CHANGE_FLAG_MASK 0x03
55 #define LP3971_BUCK1_BASE 0x23
56 #define LP3971_BUCK2_BASE 0x29
57 #define LP3971_BUCK3_BASE 0x32
59 static const int buck_base_addr[] = {
60 LP3971_BUCK1_BASE,
61 LP3971_BUCK2_BASE,
62 LP3971_BUCK3_BASE,
65 #define LP3971_BUCK_TARGET_VOL1_REG(x) (buck_base_addr[x])
66 #define LP3971_BUCK_TARGET_VOL2_REG(x) (buck_base_addr[x]+1)
68 static const int buck_voltage_map[] = {
69 0, 800, 850, 900, 950, 1000, 1050, 1100,
70 1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500,
71 1550, 1600, 1650, 1700, 1800, 1900, 2500, 2800,
72 3000, 3300,
75 #define BUCK_TARGET_VOL_MASK 0x3f
76 #define BUCK_TARGET_VOL_MIN_IDX 0x01
77 #define BUCK_TARGET_VOL_MAX_IDX 0x19
79 #define LP3971_BUCK_RAMP_REG(x) (buck_base_addr[x]+2)
81 #define LP3971_LDO_ENABLE_REG 0x12
82 #define LP3971_LDO_VOL_CONTR_BASE 0x39
84 /* Voltage control registers:
85 LP3971_LDO1 -> LP3971_LDO_VOL_CONTR_BASE + 0
86 LP3971_LDO2 -> LP3971_LDO_VOL_CONTR_BASE + 0
87 LP3971_LDO3 -> LP3971_LDO_VOL_CONTR_BASE + 1
88 LP3971_LDO4 -> LP3971_LDO_VOL_CONTR_BASE + 1
89 LP3971_LDO5 -> LP3971_LDO_VOL_CONTR_BASE + 2
91 #define LP3971_LDO_VOL_CONTR_REG(x) (LP3971_LDO_VOL_CONTR_BASE + (x >> 1))
93 /* Voltage control registers shift:
94 LP3971_LDO1 -> 0, LP3971_LDO2 -> 4
95 LP3971_LDO3 -> 0, LP3971_LDO4 -> 4
96 LP3971_LDO5 -> 0
98 #define LDO_VOL_CONTR_SHIFT(x) ((x & 1) << 2)
99 #define LDO_VOL_CONTR_MASK 0x0f
101 static const int ldo45_voltage_map[] = {
102 1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350,
103 1400, 1500, 1800, 1900, 2500, 2800, 3000, 3300,
106 static const int ldo123_voltage_map[] = {
107 1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500,
108 2600, 2700, 2800, 2900, 3000, 3100, 3200, 3300,
111 static const int *ldo_voltage_map[] = {
112 ldo123_voltage_map, /* LDO1 */
113 ldo123_voltage_map, /* LDO2 */
114 ldo123_voltage_map, /* LDO3 */
115 ldo45_voltage_map, /* LDO4 */
116 ldo45_voltage_map, /* LDO5 */
119 #define LDO_VOL_VALUE_MAP(x) (ldo_voltage_map[(x - LP3971_LDO1)])
121 #define LDO_VOL_MIN_IDX 0x00
122 #define LDO_VOL_MAX_IDX 0x0f
124 static int lp3971_ldo_list_voltage(struct regulator_dev *dev, unsigned index)
126 int ldo = rdev_get_id(dev) - LP3971_LDO1;
127 return 1000 * LDO_VOL_VALUE_MAP(ldo)[index];
130 static int lp3971_ldo_is_enabled(struct regulator_dev *dev)
132 struct lp3971 *lp3971 = rdev_get_drvdata(dev);
133 int ldo = rdev_get_id(dev) - LP3971_LDO1;
134 u16 mask = 1 << (1 + ldo);
135 u16 val;
137 val = lp3971_reg_read(lp3971, LP3971_LDO_ENABLE_REG);
138 return (val & mask) != 0;
141 static int lp3971_ldo_enable(struct regulator_dev *dev)
143 struct lp3971 *lp3971 = rdev_get_drvdata(dev);
144 int ldo = rdev_get_id(dev) - LP3971_LDO1;
145 u16 mask = 1 << (1 + ldo);
147 return lp3971_set_bits(lp3971, LP3971_LDO_ENABLE_REG, mask, mask);
150 static int lp3971_ldo_disable(struct regulator_dev *dev)
152 struct lp3971 *lp3971 = rdev_get_drvdata(dev);
153 int ldo = rdev_get_id(dev) - LP3971_LDO1;
154 u16 mask = 1 << (1 + ldo);
156 return lp3971_set_bits(lp3971, LP3971_LDO_ENABLE_REG, mask, 0);
159 static int lp3971_ldo_get_voltage(struct regulator_dev *dev)
161 struct lp3971 *lp3971 = rdev_get_drvdata(dev);
162 int ldo = rdev_get_id(dev) - LP3971_LDO1;
163 u16 val, reg;
165 reg = lp3971_reg_read(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo));
166 val = (reg >> LDO_VOL_CONTR_SHIFT(ldo)) & LDO_VOL_CONTR_MASK;
168 return 1000 * LDO_VOL_VALUE_MAP(ldo)[val];
171 static int lp3971_ldo_set_voltage(struct regulator_dev *dev,
172 int min_uV, int max_uV,
173 unsigned int *selector)
175 struct lp3971 *lp3971 = rdev_get_drvdata(dev);
176 int ldo = rdev_get_id(dev) - LP3971_LDO1;
177 int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
178 const int *vol_map = LDO_VOL_VALUE_MAP(ldo);
179 u16 val;
181 if (min_vol < vol_map[LDO_VOL_MIN_IDX] ||
182 min_vol > vol_map[LDO_VOL_MAX_IDX])
183 return -EINVAL;
185 for (val = LDO_VOL_MIN_IDX; val <= LDO_VOL_MAX_IDX; val++)
186 if (vol_map[val] >= min_vol)
187 break;
189 if (val > LDO_VOL_MAX_IDX || vol_map[val] > max_vol)
190 return -EINVAL;
192 *selector = val;
194 return lp3971_set_bits(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo),
195 LDO_VOL_CONTR_MASK << LDO_VOL_CONTR_SHIFT(ldo),
196 val << LDO_VOL_CONTR_SHIFT(ldo));
199 static struct regulator_ops lp3971_ldo_ops = {
200 .list_voltage = lp3971_ldo_list_voltage,
201 .is_enabled = lp3971_ldo_is_enabled,
202 .enable = lp3971_ldo_enable,
203 .disable = lp3971_ldo_disable,
204 .get_voltage = lp3971_ldo_get_voltage,
205 .set_voltage = lp3971_ldo_set_voltage,
208 static int lp3971_dcdc_list_voltage(struct regulator_dev *dev, unsigned index)
210 return 1000 * buck_voltage_map[index];
213 static int lp3971_dcdc_is_enabled(struct regulator_dev *dev)
215 struct lp3971 *lp3971 = rdev_get_drvdata(dev);
216 int buck = rdev_get_id(dev) - LP3971_DCDC1;
217 u16 mask = 1 << (buck * 2);
218 u16 val;
220 val = lp3971_reg_read(lp3971, LP3971_BUCK_VOL_ENABLE_REG);
221 return (val & mask) != 0;
224 static int lp3971_dcdc_enable(struct regulator_dev *dev)
226 struct lp3971 *lp3971 = rdev_get_drvdata(dev);
227 int buck = rdev_get_id(dev) - LP3971_DCDC1;
228 u16 mask = 1 << (buck * 2);
230 return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_ENABLE_REG, mask, mask);
233 static int lp3971_dcdc_disable(struct regulator_dev *dev)
235 struct lp3971 *lp3971 = rdev_get_drvdata(dev);
236 int buck = rdev_get_id(dev) - LP3971_DCDC1;
237 u16 mask = 1 << (buck * 2);
239 return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_ENABLE_REG, mask, 0);
242 static int lp3971_dcdc_get_voltage(struct regulator_dev *dev)
244 struct lp3971 *lp3971 = rdev_get_drvdata(dev);
245 int buck = rdev_get_id(dev) - LP3971_DCDC1;
246 u16 reg;
247 int val;
249 reg = lp3971_reg_read(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck));
250 reg &= BUCK_TARGET_VOL_MASK;
252 if (reg <= BUCK_TARGET_VOL_MAX_IDX)
253 val = 1000 * buck_voltage_map[reg];
254 else {
255 val = 0;
256 dev_warn(&dev->dev, "chip reported incorrect voltage value.\n");
259 return val;
262 static int lp3971_dcdc_set_voltage(struct regulator_dev *dev,
263 int min_uV, int max_uV,
264 unsigned int *selector)
266 struct lp3971 *lp3971 = rdev_get_drvdata(dev);
267 int buck = rdev_get_id(dev) - LP3971_DCDC1;
268 int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
269 const int *vol_map = buck_voltage_map;
270 u16 val;
271 int ret;
273 if (min_vol < vol_map[BUCK_TARGET_VOL_MIN_IDX] ||
274 min_vol > vol_map[BUCK_TARGET_VOL_MAX_IDX])
275 return -EINVAL;
277 for (val = BUCK_TARGET_VOL_MIN_IDX; val <= BUCK_TARGET_VOL_MAX_IDX;
278 val++)
279 if (vol_map[val] >= min_vol)
280 break;
282 if (val > BUCK_TARGET_VOL_MAX_IDX || vol_map[val] > max_vol)
283 return -EINVAL;
285 *selector = val;
287 ret = lp3971_set_bits(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck),
288 BUCK_TARGET_VOL_MASK, val);
289 if (ret)
290 return ret;
292 ret = lp3971_set_bits(lp3971, LP3971_BUCK_VOL_CHANGE_REG,
293 BUCK_VOL_CHANGE_FLAG_MASK << BUCK_VOL_CHANGE_SHIFT(buck),
294 BUCK_VOL_CHANGE_FLAG_GO << BUCK_VOL_CHANGE_SHIFT(buck));
295 if (ret)
296 return ret;
298 return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_CHANGE_REG,
299 BUCK_VOL_CHANGE_FLAG_MASK << BUCK_VOL_CHANGE_SHIFT(buck),
300 0 << BUCK_VOL_CHANGE_SHIFT(buck));
303 static struct regulator_ops lp3971_dcdc_ops = {
304 .list_voltage = lp3971_dcdc_list_voltage,
305 .is_enabled = lp3971_dcdc_is_enabled,
306 .enable = lp3971_dcdc_enable,
307 .disable = lp3971_dcdc_disable,
308 .get_voltage = lp3971_dcdc_get_voltage,
309 .set_voltage = lp3971_dcdc_set_voltage,
312 static struct regulator_desc regulators[] = {
314 .name = "LDO1",
315 .id = LP3971_LDO1,
316 .ops = &lp3971_ldo_ops,
317 .n_voltages = ARRAY_SIZE(ldo123_voltage_map),
318 .type = REGULATOR_VOLTAGE,
319 .owner = THIS_MODULE,
322 .name = "LDO2",
323 .id = LP3971_LDO2,
324 .ops = &lp3971_ldo_ops,
325 .n_voltages = ARRAY_SIZE(ldo123_voltage_map),
326 .type = REGULATOR_VOLTAGE,
327 .owner = THIS_MODULE,
330 .name = "LDO3",
331 .id = LP3971_LDO3,
332 .ops = &lp3971_ldo_ops,
333 .n_voltages = ARRAY_SIZE(ldo123_voltage_map),
334 .type = REGULATOR_VOLTAGE,
335 .owner = THIS_MODULE,
338 .name = "LDO4",
339 .id = LP3971_LDO4,
340 .ops = &lp3971_ldo_ops,
341 .n_voltages = ARRAY_SIZE(ldo45_voltage_map),
342 .type = REGULATOR_VOLTAGE,
343 .owner = THIS_MODULE,
346 .name = "LDO5",
347 .id = LP3971_LDO5,
348 .ops = &lp3971_ldo_ops,
349 .n_voltages = ARRAY_SIZE(ldo45_voltage_map),
350 .type = REGULATOR_VOLTAGE,
351 .owner = THIS_MODULE,
354 .name = "DCDC1",
355 .id = LP3971_DCDC1,
356 .ops = &lp3971_dcdc_ops,
357 .n_voltages = ARRAY_SIZE(buck_voltage_map),
358 .type = REGULATOR_VOLTAGE,
359 .owner = THIS_MODULE,
362 .name = "DCDC2",
363 .id = LP3971_DCDC2,
364 .ops = &lp3971_dcdc_ops,
365 .n_voltages = ARRAY_SIZE(buck_voltage_map),
366 .type = REGULATOR_VOLTAGE,
367 .owner = THIS_MODULE,
370 .name = "DCDC3",
371 .id = LP3971_DCDC3,
372 .ops = &lp3971_dcdc_ops,
373 .n_voltages = ARRAY_SIZE(buck_voltage_map),
374 .type = REGULATOR_VOLTAGE,
375 .owner = THIS_MODULE,
379 static int lp3971_i2c_read(struct i2c_client *i2c, char reg, int count,
380 u16 *dest)
382 int ret;
384 if (count != 1)
385 return -EIO;
386 ret = i2c_smbus_read_byte_data(i2c, reg);
387 if (ret < 0)
388 return -EIO;
390 *dest = ret;
391 return 0;
394 static int lp3971_i2c_write(struct i2c_client *i2c, char reg, int count,
395 const u16 *src)
397 if (count != 1)
398 return -EIO;
399 return i2c_smbus_write_byte_data(i2c, reg, *src);
402 static u8 lp3971_reg_read(struct lp3971 *lp3971, u8 reg)
404 u16 val = 0;
406 mutex_lock(&lp3971->io_lock);
408 lp3971_i2c_read(lp3971->i2c, reg, 1, &val);
410 dev_dbg(lp3971->dev, "reg read 0x%02x -> 0x%02x\n", (int)reg,
411 (unsigned)val&0xff);
413 mutex_unlock(&lp3971->io_lock);
415 return val & 0xff;
418 static int lp3971_set_bits(struct lp3971 *lp3971, u8 reg, u16 mask, u16 val)
420 u16 tmp;
421 int ret;
423 mutex_lock(&lp3971->io_lock);
425 ret = lp3971_i2c_read(lp3971->i2c, reg, 1, &tmp);
426 tmp = (tmp & ~mask) | val;
427 if (ret == 0) {
428 ret = lp3971_i2c_write(lp3971->i2c, reg, 1, &tmp);
429 dev_dbg(lp3971->dev, "reg write 0x%02x -> 0x%02x\n", (int)reg,
430 (unsigned)val&0xff);
432 mutex_unlock(&lp3971->io_lock);
434 return ret;
437 static int __devinit setup_regulators(struct lp3971 *lp3971,
438 struct lp3971_platform_data *pdata)
440 int i, err;
442 lp3971->num_regulators = pdata->num_regulators;
443 lp3971->rdev = kcalloc(pdata->num_regulators,
444 sizeof(struct regulator_dev *), GFP_KERNEL);
445 if (!lp3971->rdev) {
446 err = -ENOMEM;
447 goto err_nomem;
450 /* Instantiate the regulators */
451 for (i = 0; i < pdata->num_regulators; i++) {
452 struct lp3971_regulator_subdev *reg = &pdata->regulators[i];
453 lp3971->rdev[i] = regulator_register(&regulators[reg->id],
454 lp3971->dev, reg->initdata, lp3971);
456 if (IS_ERR(lp3971->rdev[i])) {
457 err = PTR_ERR(lp3971->rdev[i]);
458 dev_err(lp3971->dev, "regulator init failed: %d\n",
459 err);
460 goto error;
464 return 0;
466 error:
467 while (--i >= 0)
468 regulator_unregister(lp3971->rdev[i]);
469 kfree(lp3971->rdev);
470 lp3971->rdev = NULL;
471 err_nomem:
472 return err;
475 static int __devinit lp3971_i2c_probe(struct i2c_client *i2c,
476 const struct i2c_device_id *id)
478 struct lp3971 *lp3971;
479 struct lp3971_platform_data *pdata = i2c->dev.platform_data;
480 int ret;
481 u16 val;
483 if (!pdata) {
484 dev_dbg(&i2c->dev, "No platform init data supplied\n");
485 return -ENODEV;
488 lp3971 = kzalloc(sizeof(struct lp3971), GFP_KERNEL);
489 if (lp3971 == NULL)
490 return -ENOMEM;
492 lp3971->i2c = i2c;
493 lp3971->dev = &i2c->dev;
495 mutex_init(&lp3971->io_lock);
497 /* Detect LP3971 */
498 ret = lp3971_i2c_read(i2c, LP3971_SYS_CONTROL1_REG, 1, &val);
499 if (ret == 0 && (val & SYS_CONTROL1_INIT_MASK) != SYS_CONTROL1_INIT_VAL)
500 ret = -ENODEV;
501 if (ret < 0) {
502 dev_err(&i2c->dev, "failed to detect device\n");
503 goto err_detect;
506 ret = setup_regulators(lp3971, pdata);
507 if (ret < 0)
508 goto err_detect;
510 i2c_set_clientdata(i2c, lp3971);
511 return 0;
513 err_detect:
514 kfree(lp3971);
515 return ret;
518 static int __devexit lp3971_i2c_remove(struct i2c_client *i2c)
520 struct lp3971 *lp3971 = i2c_get_clientdata(i2c);
521 int i;
523 for (i = 0; i < lp3971->num_regulators; i++)
524 regulator_unregister(lp3971->rdev[i]);
526 kfree(lp3971->rdev);
527 kfree(lp3971);
529 return 0;
532 static const struct i2c_device_id lp3971_i2c_id[] = {
533 { "lp3971", 0 },
536 MODULE_DEVICE_TABLE(i2c, lp3971_i2c_id);
538 static struct i2c_driver lp3971_i2c_driver = {
539 .driver = {
540 .name = "LP3971",
541 .owner = THIS_MODULE,
543 .probe = lp3971_i2c_probe,
544 .remove = __devexit_p(lp3971_i2c_remove),
545 .id_table = lp3971_i2c_id,
548 static int __init lp3971_module_init(void)
550 int ret;
552 ret = i2c_add_driver(&lp3971_i2c_driver);
553 if (ret != 0)
554 pr_err("Failed to register I2C driver: %d\n", ret);
556 return ret;
558 module_init(lp3971_module_init);
560 static void __exit lp3971_module_exit(void)
562 i2c_del_driver(&lp3971_i2c_driver);
564 module_exit(lp3971_module_exit);
566 MODULE_LICENSE("GPL");
567 MODULE_AUTHOR("Marek Szyprowski <m.szyprowski@samsung.com>");
568 MODULE_DESCRIPTION("LP3971 PMIC driver");