drivers/scsi/isci/firmware/create_fw.h

   1 #ifndef _CREATE_FW_H_
   2 #define _CREATE_FW_H_
   3 #include "../probe_roms.h"
   4
   5
   6 /* we are configuring for 2 SCUs */
   7 static const int num_elements = 2;
   8
   9 /*
  10  * For all defined arrays:
  11  * elements 0-3 are for SCU0, ports 0-3
  12  * elements 4-7 are for SCU1, ports 0-3
  13  *
  14  * valid configurations for one SCU are:
  15  *  P0  P1  P2  P3
  16  * ----------------
  17  * 0xF,0x0,0x0,0x0 # 1 x4 port
  18  * 0x3,0x0,0x4,0x8 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are each x1
  19  *                 # ports
  20  * 0x1,0x2,0xC,0x0 # Phys 0 and 1 are each x1 ports, phy 2 and phy 3 are a x2
  21  *                 # port
  22  * 0x3,0x0,0xC,0x0 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are a x2 port
  23  * 0x1,0x2,0x4,0x8 # Each phy is a x1 port (this is the default configuration)
  24  *
  25  * if there is a port/phy on which you do not wish to override the default
  26  * values, use the value assigned to UNINIT_PARAM (255).
  27  */
  28
  29 /* discovery mode type (port auto config mode by default ) */
  30
  31 /*
  32  * if there is a port/phy on which you do not wish to override the default
  33  * values, use the value "0000000000000000". SAS address of zero's is
  34  * considered invalid and will not be used.
  35  */
  36 #ifdef MPC
  37 static const int mode_type = SCIC_PORT_MANUAL_CONFIGURATION_MODE;
  38 static const __u8 phy_mask[2][4] = { {1, 2, 4, 8},
  39                                      {1, 2, 4, 8} };
  40 static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFFF0000001ULL,
  41                                                      0x5FCFFFFFF0000002ULL,
  42                                                      0x5FCFFFFFF0000003ULL,
  43                                                      0x5FCFFFFFF0000004ULL },
  44                                                    { 0x5FCFFFFFF0000005ULL,
  45                                                      0x5FCFFFFFF0000006ULL,
  46                                                      0x5FCFFFFFF0000007ULL,
  47                                                      0x5FCFFFFFF0000008ULL } };
  48 #else   /* APC (default) */
  49 static const int mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE;
  50 static const __u8 phy_mask[2][4];
  51 static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFF00000001ULL,
  52                                                      0x5FCFFFFF00000001ULL,
  53                                                      0x5FCFFFFF00000001ULL,
  54                                                      0x5FCFFFFF00000001ULL },
  55                                                    { 0x5FCFFFFF00000002ULL,
  56                                                      0x5FCFFFFF00000002ULL,
  57                                                      0x5FCFFFFF00000002ULL,
  58                                                      0x5FCFFFFF00000002ULL } };
  59 #endif
  60
  61 /* Maximum number of concurrent device spin up */
  62 static const int max_num_concurrent_dev_spin_up = 1;
  63
  64 /* enable of ssc operation */
  65 static const int enable_ssc;
  66
  67 /* AFE_TX_AMP_CONTROL */
  68 static const unsigned int afe_tx_amp_control0 = 0x000bdd08;
  69 static const unsigned int afe_tx_amp_control1 = 0x000ffc00;
  70 static const unsigned int afe_tx_amp_control2 = 0x000b7c09;
  71 static const unsigned int afe_tx_amp_control3 = 0x000afc6e;
  72
  73 static const char blob_name[] = "isci_firmware.bin";
  74 static const char sig[] = "ISCUOEMB";
  75 static const unsigned char version = 0x10;
  76
  77 #endif