drivers/staging/sbe-2t3e3/ctrl.c

   1 /*
   2  * SBE 2T3E3 synchronous serial card driver for Linux
   3  *
   4  * Copyright (C) 2009-2010 Krzysztof Halasa <khc@pm.waw.pl>
   5  *
   6  * This program is free software; you can redistribute it and/or modify it
   7  * under the terms of version 2 of the GNU General Public License
   8  * as published by the Free Software Foundation.
   9  *
  10  * This code is based on a driver written by SBE Inc.
  11  */
  12
  13 #include <linux/types.h>
  14 #include "2t3e3.h"
  15 #include "ctrl.h"
  16
  17 void t3e3_set_frame_type(struct channel *sc, u32 mode)
  18 {
  19         if (sc->p.frame_type == mode)
  20                 return;
  21
  22         if (sc->r.flags & SBE_2T3E3_FLAG_NETWORK_UP) {
  23                 dev_err(&sc->pdev->dev, "SBE 2T3E3: changing frame type during active connection\n");
  24                 return;
  25         }
  26
  27         exar7300_set_frame_type(sc, mode);
  28         exar7250_set_frame_type(sc, mode);
  29         cpld_set_frame_type(sc, mode);
  30
  31         sc->p.frame_type = mode;
  32 }
  33
  34 void t3e3_set_loopback(struct channel *sc, u32 mode)
  35 {
  36         u32 tx, rx;
  37
  38         if (sc->p.loopback == mode)
  39                 return;
  40
  41         tx = sc->p.transmitter_on;
  42         rx = sc->p.receiver_on;
  43         if (tx == SBE_2T3E3_ON)
  44                 dc_transmitter_onoff(sc, SBE_2T3E3_OFF);
  45         if (rx == SBE_2T3E3_ON)
  46                 dc_receiver_onoff(sc, SBE_2T3E3_OFF);
  47
  48         /* stop current loopback if any exists */
  49         switch (sc->p.loopback) {
  50         case SBE_2T3E3_LOOPBACK_NONE:
  51                 break;
  52         case SBE_2T3E3_LOOPBACK_ETHERNET:
  53                 dc_set_loopback(sc, SBE_2T3E3_21143_VAL_LOOPBACK_OFF);
  54                 break;
  55         case SBE_2T3E3_LOOPBACK_FRAMER:
  56                 exar7250_set_loopback(sc, SBE_2T3E3_FRAMER_VAL_LOOPBACK_OFF);
  57                 break;
  58         case SBE_2T3E3_LOOPBACK_LIU_DIGITAL:
  59         case SBE_2T3E3_LOOPBACK_LIU_ANALOG:
  60         case SBE_2T3E3_LOOPBACK_LIU_REMOTE:
  61                 exar7300_set_loopback(sc, SBE_2T3E3_LIU_VAL_LOOPBACK_OFF);
  62                 break;
  63         default:
  64                 return;
  65         }
  66
  67         switch (mode) {
  68         case SBE_2T3E3_LOOPBACK_NONE:
  69                 break;
  70         case SBE_2T3E3_LOOPBACK_ETHERNET:
  71                 dc_set_loopback(sc, SBE_2T3E3_21143_VAL_LOOPBACK_INTERNAL);
  72                 break;
  73         case SBE_2T3E3_LOOPBACK_FRAMER:
  74                 exar7250_set_loopback(sc, SBE_2T3E3_FRAMER_VAL_LOOPBACK_ON);
  75                 break;
  76         case SBE_2T3E3_LOOPBACK_LIU_DIGITAL:
  77                 exar7300_set_loopback(sc, SBE_2T3E3_LIU_VAL_LOOPBACK_DIGITAL);
  78                 break;
  79         case SBE_2T3E3_LOOPBACK_LIU_ANALOG:
  80                 exar7300_set_loopback(sc, SBE_2T3E3_LIU_VAL_LOOPBACK_ANALOG);
  81                 break;
  82         case SBE_2T3E3_LOOPBACK_LIU_REMOTE:
  83                 exar7300_set_loopback(sc, SBE_2T3E3_LIU_VAL_LOOPBACK_REMOTE);
  84                 break;
  85         default:
  86                 return;
  87         }
  88
  89         sc->p.loopback = mode;
  90
  91         if (tx == SBE_2T3E3_ON)
  92                 dc_transmitter_onoff(sc, SBE_2T3E3_ON);
  93         if (rx == SBE_2T3E3_ON)
  94                 dc_receiver_onoff(sc, SBE_2T3E3_ON);
  95 }
  96
  97
  98 void t3e3_reg_read(struct channel *sc, u32 *reg, u32 *val)
  99 {
 100         u32 i;
 101
 102         *val = 0;
 103
 104         switch (reg[0]) {
 105         case SBE_2T3E3_CHIP_21143:
 106                 if (!(reg[1] & 7))
 107                         *val = dc_read(sc->addr, reg[1] / 8);
 108                 break;
 109         case SBE_2T3E3_CHIP_CPLD:
 110                 for (i = 0; i < SBE_2T3E3_CPLD_REG_MAX; i++)
 111                         if (cpld_reg_map[i][sc->h.slot] == reg[1]) {
 112                                 *val = cpld_read(sc, i);
 113                                 break;
 114                         }
 115                 break;
 116         case SBE_2T3E3_CHIP_FRAMER:
 117                 for (i = 0; i < SBE_2T3E3_FRAMER_REG_MAX; i++)
 118                         if (t3e3_framer_reg_map[i] == reg[1]) {
 119                                 *val = exar7250_read(sc, i);
 120                                 break;
 121                         }
 122                 break;
 123         case SBE_2T3E3_CHIP_LIU:
 124                 for (i = 0; i < SBE_2T3E3_LIU_REG_MAX; i++)
 125                         if (t3e3_liu_reg_map[i] == reg[1]) {
 126                                 *val = exar7300_read(sc, i);
 127                                 break;
 128                         }
 129                 break;
 130         default:
 131                 break;
 132         }
 133 }
 134
 135 void t3e3_reg_write(struct channel *sc, u32 *reg)
 136 {
 137         u32 i;
 138
 139         switch (reg[0]) {
 140         case SBE_2T3E3_CHIP_21143:
 141                 dc_write(sc->addr, reg[1], reg[2]);
 142                 break;
 143         case SBE_2T3E3_CHIP_CPLD:
 144                 for (i = 0; i < SBE_2T3E3_CPLD_REG_MAX; i++)
 145                         if (cpld_reg_map[i][sc->h.slot] == reg[1]) {
 146                                 cpld_write(sc, i, reg[2]);
 147                                 break;
 148                         }
 149                 break;
 150         case SBE_2T3E3_CHIP_FRAMER:
 151                 for (i = 0; i < SBE_2T3E3_FRAMER_REG_MAX; i++)
 152                         if (t3e3_framer_reg_map[i] == reg[1]) {
 153                                 exar7250_write(sc, i, reg[2]);
 154                                 break;
 155                         }
 156                 break;
 157         case SBE_2T3E3_CHIP_LIU:
 158                 for (i = 0; i < SBE_2T3E3_LIU_REG_MAX; i++)
 159                         if (t3e3_liu_reg_map[i] == reg[1]) {
 160                                 exar7300_write(sc, i, reg[2]);
 161                                 break;
 162                         }
 163                 break;
 164         }
 165 }
 166
 167 void t3e3_port_get(struct channel *sc, t3e3_param_t *param)
 168 {
 169         memcpy(param, &(sc->p), sizeof(t3e3_param_t));
 170 }
 171
 172 void t3e3_port_set(struct channel *sc, t3e3_param_t *param)
 173 {
 174         if (param->frame_mode != 0xff)
 175                 cpld_set_frame_mode(sc, param->frame_mode);
 176
 177         if (param->fractional_mode != 0xff)
 178                 cpld_set_fractional_mode(sc, param->fractional_mode,
 179                                          param->bandwidth_start,
 180                                          param->bandwidth_stop);
 181
 182         if (param->pad_count != 0xff)
 183                 cpld_set_pad_count(sc, param->pad_count);
 184
 185         if (param->crc != 0xff)
 186                 cpld_set_crc(sc, param->crc);
 187
 188         if (param->receiver_on != 0xff)
 189                 dc_receiver_onoff(sc, param->receiver_on);
 190
 191         if (param->transmitter_on != 0xff)
 192                 dc_transmitter_onoff(sc, param->transmitter_on);
 193
 194         if (param->frame_type != 0xff)
 195                 t3e3_set_frame_type(sc, param->frame_type);
 196
 197         if (param->panel != 0xff)
 198                 cpld_select_panel(sc, param->panel);
 199
 200         if (param->line_build_out != 0xff)
 201                 exar7300_line_build_out_onoff(sc, param->line_build_out);
 202
 203         if (param->receive_equalization != 0xff)
 204                 exar7300_receive_equalization_onoff(sc, param->receive_equalization);
 205
 206         if (param->transmit_all_ones != 0xff)
 207                 exar7300_transmit_all_ones_onoff(sc, param->transmit_all_ones);
 208
 209         if (param->loopback != 0xff)
 210                 t3e3_set_loopback(sc, param->loopback);
 211
 212         if (param->clock_source != 0xff)
 213                 cpld_set_clock(sc, param->clock_source);
 214
 215         if (param->scrambler != 0xff)
 216                 cpld_set_scrambler(sc, param->scrambler);
 217 }
 218
 219 void t3e3_port_get_stats(struct channel *sc,
 220                          t3e3_stats_t *stats)
 221 {
 222         u32 result;
 223
 224         sc->s.LOC = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_IO_CONTROL)
 225                 & SBE_2T3E3_FRAMER_VAL_LOSS_OF_CLOCK_STATUS ? 1 : 0;
 226
 227         switch (sc->p.frame_type) {
 228         case SBE_2T3E3_FRAME_TYPE_E3_G751:
 229         case SBE_2T3E3_FRAME_TYPE_E3_G832:
 230                 result = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_E3_RX_CONFIGURATION_STATUS_2);
 231                 sc->s.LOF = result & SBE_2T3E3_FRAMER_VAL_E3_RX_LOF ? 1 : 0;
 232                 sc->s.OOF = result & SBE_2T3E3_FRAMER_VAL_E3_RX_OOF ? 1 : 0;
 233 #if 0
 234                 sc->s.LOS = result & SBE_2T3E3_FRAMER_VAL_E3_RX_LOS ? 1 : 0;
 235 #else
 236                 cpld_LOS_update(sc);
 237 #endif
 238                 sc->s.AIS = result & SBE_2T3E3_FRAMER_VAL_E3_RX_AIS ? 1 : 0;
 239                 sc->s.FERF = result & SBE_2T3E3_FRAMER_VAL_E3_RX_FERF ? 1 : 0;
 240                 break;
 241
 242         case SBE_2T3E3_FRAME_TYPE_T3_CBIT:
 243         case SBE_2T3E3_FRAME_TYPE_T3_M13:
 244                 result = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_RX_CONFIGURATION_STATUS);
 245                 sc->s.AIS = result & SBE_2T3E3_FRAMER_VAL_T3_RX_AIS ? 1 : 0;
 246 #if 0
 247                 sc->s.LOS = result & SBE_2T3E3_FRAMER_VAL_T3_RX_LOS ? 1 : 0;
 248 #else
 249                 cpld_LOS_update(sc);
 250 #endif
 251                 sc->s.IDLE = result & SBE_2T3E3_FRAMER_VAL_T3_RX_IDLE ? 1 : 0;
 252                 sc->s.OOF = result & SBE_2T3E3_FRAMER_VAL_T3_RX_OOF ? 1 : 0;
 253
 254                 result = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_RX_STATUS);
 255                 sc->s.FERF = result & SBE_2T3E3_FRAMER_VAL_T3_RX_FERF ? 1 : 0;
 256                 sc->s.AIC = result & SBE_2T3E3_FRAMER_VAL_T3_RX_AIC ? 1 : 0;
 257                 sc->s.FEBE_code = result & SBE_2T3E3_FRAMER_VAL_T3_RX_FEBE;
 258
 259                 sc->s.FEAC = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_RX_FEAC);
 260                 break;
 261
 262         default:
 263                 break;
 264         }
 265
 266         result = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_PMON_LCV_EVENT_COUNT_MSB) << 8;
 267         result += exar7250_read(sc, SBE_2T3E3_FRAMER_REG_PMON_HOLDING_REGISTER);
 268         sc->s.LCV += result;
 269
 270         result = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_PMON_FRAMING_BIT_ERROR_EVENT_COUNT_MSB) << 8;
 271         result += exar7250_read(sc, SBE_2T3E3_FRAMER_REG_PMON_HOLDING_REGISTER);
 272         sc->s.FRAMING_BIT += result;
 273
 274         result = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_PMON_PARITY_ERROR_EVENT_COUNT_MSB) << 8;
 275         result += exar7250_read(sc, SBE_2T3E3_FRAMER_REG_PMON_HOLDING_REGISTER);
 276         sc->s.PARITY_ERROR += result;
 277
 278         result = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_PMON_FEBE_EVENT_COUNT_MSB) << 8;
 279         result += exar7250_read(sc, SBE_2T3E3_FRAMER_REG_PMON_HOLDING_REGISTER);
 280         sc->s.FEBE_count += result;
 281
 282         result = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_PMON_CP_BIT_ERROR_EVENT_COUNT_MSB) << 8;
 283         result += exar7250_read(sc, SBE_2T3E3_FRAMER_REG_PMON_HOLDING_REGISTER);
 284         sc->s.CP_BIT += result;
 285
 286         memcpy(stats, &(sc->s), sizeof(t3e3_stats_t));
 287 }
 288
 289 void t3e3_port_del_stats(struct channel *sc)
 290 {
 291         memset(&(sc->s), 0, sizeof(t3e3_stats_t));
 292 }
 293
 294 void t3e3_if_config(struct channel *sc, u32 cmd, char *set,
 295                     t3e3_resp_t *ret, int *rlen)
 296 {
 297         t3e3_param_t *param = (t3e3_param_t *)set;
 298         u32 *data = (u32 *)set;
 299
 300         /* turn off all interrupt */
 301         /* cpld_stop_intr(sc); */
 302
 303         switch (cmd) {
 304         case SBE_2T3E3_PORT_GET:
 305                 t3e3_port_get(sc, &(ret->u.param));
 306                 *rlen = sizeof(ret->u.param);
 307                 break;
 308         case SBE_2T3E3_PORT_SET:
 309                 t3e3_port_set(sc, param);
 310                 *rlen = 0;
 311                 break;
 312         case SBE_2T3E3_PORT_GET_STATS:
 313                 t3e3_port_get_stats(sc, &(ret->u.stats));
 314                 *rlen = sizeof(ret->u.stats);
 315                 break;
 316         case SBE_2T3E3_PORT_DEL_STATS:
 317                 t3e3_port_del_stats(sc);
 318                 *rlen = 0;
 319                 break;
 320         case SBE_2T3E3_PORT_READ_REGS:
 321                 t3e3_reg_read(sc, data, &(ret->u.data));
 322                 *rlen = sizeof(ret->u.data);
 323                 break;
 324         case SBE_2T3E3_PORT_WRITE_REGS:
 325 #if 0
 326                 printk(KERN_DEBUG "SBE_2T3E3_PORT_WRITE_REGS, 0x%x, 0x%x, 0x%x\n",
 327                        ((int*)data)[0], ((int*)data)[1], ((int*)data)[2]);
 328 #endif
 329                 t3e3_reg_write(sc, data);
 330                 *rlen = 0;
 331                 break;
 332         case SBE_2T3E3_LOG_LEVEL:
 333                 *rlen = 0;
 334                 break;
 335         default:
 336                 *rlen = 0;
 337                 break;
 338         }
 339
 340         /* turn on interrupt */
 341         /* cpld_start_intr(sc); */
 342 }
 343
 344 void t3e3_sc_init(struct channel *sc)
 345 {
 346         memset(sc, 0, sizeof(*sc));
 347
 348         sc->p.frame_mode = SBE_2T3E3_FRAME_MODE_HDLC;
 349         sc->p.fractional_mode = SBE_2T3E3_FRACTIONAL_MODE_NONE;
 350         sc->p.crc = SBE_2T3E3_CRC_32;
 351         sc->p.receiver_on = SBE_2T3E3_OFF;
 352         sc->p.transmitter_on = SBE_2T3E3_OFF;
 353         sc->p.frame_type = SBE_2T3E3_FRAME_TYPE_T3_CBIT;
 354         sc->p.panel = SBE_2T3E3_PANEL_FRONT;
 355         sc->p.line_build_out = SBE_2T3E3_OFF;
 356         sc->p.receive_equalization = SBE_2T3E3_OFF;
 357         sc->p.transmit_all_ones = SBE_2T3E3_OFF;
 358         sc->p.loopback = SBE_2T3E3_LOOPBACK_NONE;
 359         sc->p.clock_source = SBE_2T3E3_TIMING_LOCAL;
 360         sc->p.scrambler = SBE_2T3E3_SCRAMBLER_OFF;
 361         sc->p.pad_count = SBE_2T3E3_PAD_COUNT_1;
 362 }