1 /******************************************************************************
3 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
5 * Portions of this file are derived from the ipw3945 project, as well
6 * as portions of the ieee80211 subsystem header files.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of version 2 of the GNU General Public License as
10 * published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17 * You should have received a copy of the GNU General Public License along with
18 * this program; if not, write to the Free Software Foundation, Inc.,
19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
21 * The full GNU General Public License is included in this distribution in the
22 * file called LICENSE.
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
28 *****************************************************************************/
29 #include <linux/kernel.h>
30 #include <linux/module.h>
31 #include <linux/init.h>
32 #include <linux/slab.h>
33 #include <linux/dma-mapping.h>
34 #include <linux/delay.h>
35 #include <linux/sched.h>
36 #include <linux/skbuff.h>
37 #include <linux/netdevice.h>
38 #include <linux/firmware.h>
39 #include <linux/etherdevice.h>
40 #include <linux/if_arp.h>
42 #include <net/mac80211.h>
44 #include <asm/div64.h>
46 #include "iwl-eeprom.h"
50 #include "iwl-helpers.h"
52 #include "iwl-agn-calib.h"
55 #include "iwl-trans.h"
57 /******************************************************************************
61 ******************************************************************************/
64 * module name, copyright, version, etc.
66 #define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux"
68 #ifdef CONFIG_IWLWIFI_DEBUG
74 #define DRV_VERSION IWLWIFI_VERSION VD
77 MODULE_DESCRIPTION(DRV_DESCRIPTION
);
78 MODULE_VERSION(DRV_VERSION
);
79 MODULE_AUTHOR(DRV_COPYRIGHT
" " DRV_AUTHOR
);
80 MODULE_LICENSE("GPL");
82 static int iwlagn_ant_coupling
;
83 static bool iwlagn_bt_ch_announce
= 1;
85 void iwl_update_chain_flags(struct iwl_priv
*priv
)
87 struct iwl_rxon_context
*ctx
;
89 for_each_context(priv
, ctx
) {
90 iwlagn_set_rxon_chain(priv
, ctx
);
91 if (ctx
->active
.rx_chain
!= ctx
->staging
.rx_chain
)
92 iwlagn_commit_rxon(priv
, ctx
);
96 /* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
97 static void iwl_set_beacon_tim(struct iwl_priv
*priv
,
98 struct iwl_tx_beacon_cmd
*tx_beacon_cmd
,
99 u8
*beacon
, u32 frame_size
)
102 struct ieee80211_mgmt
*mgmt
= (struct ieee80211_mgmt
*)beacon
;
105 * The index is relative to frame start but we start looking at the
106 * variable-length part of the beacon.
108 tim_idx
= mgmt
->u
.beacon
.variable
- beacon
;
110 /* Parse variable-length elements of beacon to find WLAN_EID_TIM */
111 while ((tim_idx
< (frame_size
- 2)) &&
112 (beacon
[tim_idx
] != WLAN_EID_TIM
))
113 tim_idx
+= beacon
[tim_idx
+1] + 2;
115 /* If TIM field was found, set variables */
116 if ((tim_idx
< (frame_size
- 1)) && (beacon
[tim_idx
] == WLAN_EID_TIM
)) {
117 tx_beacon_cmd
->tim_idx
= cpu_to_le16(tim_idx
);
118 tx_beacon_cmd
->tim_size
= beacon
[tim_idx
+1];
120 IWL_WARN(priv
, "Unable to find TIM Element in beacon\n");
123 int iwlagn_send_beacon_cmd(struct iwl_priv
*priv
)
125 struct iwl_tx_beacon_cmd
*tx_beacon_cmd
;
126 struct iwl_host_cmd cmd
= {
127 .id
= REPLY_TX_BEACON
,
130 struct ieee80211_tx_info
*info
;
136 * We have to set up the TX command, the TX Beacon command, and the
140 lockdep_assert_held(&priv
->mutex
);
142 if (!priv
->beacon_ctx
) {
143 IWL_ERR(priv
, "trying to build beacon w/o beacon context!\n");
147 if (WARN_ON(!priv
->beacon_skb
))
150 /* Allocate beacon command */
151 if (!priv
->beacon_cmd
)
152 priv
->beacon_cmd
= kzalloc(sizeof(*tx_beacon_cmd
), GFP_KERNEL
);
153 tx_beacon_cmd
= priv
->beacon_cmd
;
157 frame_size
= priv
->beacon_skb
->len
;
159 /* Set up TX command fields */
160 tx_beacon_cmd
->tx
.len
= cpu_to_le16((u16
)frame_size
);
161 tx_beacon_cmd
->tx
.sta_id
= priv
->beacon_ctx
->bcast_sta_id
;
162 tx_beacon_cmd
->tx
.stop_time
.life_time
= TX_CMD_LIFE_TIME_INFINITE
;
163 tx_beacon_cmd
->tx
.tx_flags
= TX_CMD_FLG_SEQ_CTL_MSK
|
164 TX_CMD_FLG_TSF_MSK
| TX_CMD_FLG_STA_RATE_MSK
;
166 /* Set up TX beacon command fields */
167 iwl_set_beacon_tim(priv
, tx_beacon_cmd
, priv
->beacon_skb
->data
,
170 /* Set up packet rate and flags */
171 info
= IEEE80211_SKB_CB(priv
->beacon_skb
);
174 * Let's set up the rate at least somewhat correctly;
175 * it will currently not actually be used by the uCode,
176 * it uses the broadcast station's rate instead.
178 if (info
->control
.rates
[0].idx
< 0 ||
179 info
->control
.rates
[0].flags
& IEEE80211_TX_RC_MCS
)
182 rate
= info
->control
.rates
[0].idx
;
184 priv
->mgmt_tx_ant
= iwl_toggle_tx_ant(priv
, priv
->mgmt_tx_ant
,
185 priv
->hw_params
.valid_tx_ant
);
186 rate_flags
= iwl_ant_idx_to_flags(priv
->mgmt_tx_ant
);
188 /* In mac80211, rates for 5 GHz start at 0 */
189 if (info
->band
== IEEE80211_BAND_5GHZ
)
190 rate
+= IWL_FIRST_OFDM_RATE
;
191 else if (rate
>= IWL_FIRST_CCK_RATE
&& rate
<= IWL_LAST_CCK_RATE
)
192 rate_flags
|= RATE_MCS_CCK_MSK
;
194 tx_beacon_cmd
->tx
.rate_n_flags
=
195 iwl_hw_set_rate_n_flags(rate
, rate_flags
);
198 cmd
.len
[0] = sizeof(*tx_beacon_cmd
);
199 cmd
.data
[0] = tx_beacon_cmd
;
200 cmd
.dataflags
[0] = IWL_HCMD_DFL_NOCOPY
;
201 cmd
.len
[1] = frame_size
;
202 cmd
.data
[1] = priv
->beacon_skb
->data
;
203 cmd
.dataflags
[1] = IWL_HCMD_DFL_NOCOPY
;
205 return trans_send_cmd(&priv
->trans
, &cmd
);
208 static void iwl_bg_beacon_update(struct work_struct
*work
)
210 struct iwl_priv
*priv
=
211 container_of(work
, struct iwl_priv
, beacon_update
);
212 struct sk_buff
*beacon
;
214 mutex_lock(&priv
->mutex
);
215 if (!priv
->beacon_ctx
) {
216 IWL_ERR(priv
, "updating beacon w/o beacon context!\n");
220 if (priv
->beacon_ctx
->vif
->type
!= NL80211_IFTYPE_AP
) {
222 * The ucode will send beacon notifications even in
223 * IBSS mode, but we don't want to process them. But
224 * we need to defer the type check to here due to
225 * requiring locking around the beacon_ctx access.
230 /* Pull updated AP beacon from mac80211. will fail if not in AP mode */
231 beacon
= ieee80211_beacon_get(priv
->hw
, priv
->beacon_ctx
->vif
);
233 IWL_ERR(priv
, "update beacon failed -- keeping old\n");
237 /* new beacon skb is allocated every time; dispose previous.*/
238 dev_kfree_skb(priv
->beacon_skb
);
240 priv
->beacon_skb
= beacon
;
242 iwlagn_send_beacon_cmd(priv
);
244 mutex_unlock(&priv
->mutex
);
247 static void iwl_bg_bt_runtime_config(struct work_struct
*work
)
249 struct iwl_priv
*priv
=
250 container_of(work
, struct iwl_priv
, bt_runtime_config
);
252 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
255 /* dont send host command if rf-kill is on */
256 if (!iwl_is_ready_rf(priv
))
258 iwlagn_send_advance_bt_config(priv
);
261 static void iwl_bg_bt_full_concurrency(struct work_struct
*work
)
263 struct iwl_priv
*priv
=
264 container_of(work
, struct iwl_priv
, bt_full_concurrency
);
265 struct iwl_rxon_context
*ctx
;
267 mutex_lock(&priv
->mutex
);
269 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
272 /* dont send host command if rf-kill is on */
273 if (!iwl_is_ready_rf(priv
))
276 IWL_DEBUG_INFO(priv
, "BT coex in %s mode\n",
277 priv
->bt_full_concurrent
?
278 "full concurrency" : "3-wire");
281 * LQ & RXON updated cmds must be sent before BT Config cmd
282 * to avoid 3-wire collisions
284 for_each_context(priv
, ctx
) {
285 iwlagn_set_rxon_chain(priv
, ctx
);
286 iwlagn_commit_rxon(priv
, ctx
);
289 iwlagn_send_advance_bt_config(priv
);
291 mutex_unlock(&priv
->mutex
);
295 * iwl_bg_statistics_periodic - Timer callback to queue statistics
297 * This callback is provided in order to send a statistics request.
299 * This timer function is continually reset to execute within
300 * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
301 * was received. We need to ensure we receive the statistics in order
302 * to update the temperature used for calibrating the TXPOWER.
304 static void iwl_bg_statistics_periodic(unsigned long data
)
306 struct iwl_priv
*priv
= (struct iwl_priv
*)data
;
308 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
311 /* dont send host command if rf-kill is on */
312 if (!iwl_is_ready_rf(priv
))
315 iwl_send_statistics_request(priv
, CMD_ASYNC
, false);
319 static void iwl_print_cont_event_trace(struct iwl_priv
*priv
, u32 base
,
320 u32 start_idx
, u32 num_events
,
324 u32 ptr
; /* SRAM byte address of log data */
325 u32 ev
, time
, data
; /* event log data */
326 unsigned long reg_flags
;
329 ptr
= base
+ (4 * sizeof(u32
)) + (start_idx
* 2 * sizeof(u32
));
331 ptr
= base
+ (4 * sizeof(u32
)) + (start_idx
* 3 * sizeof(u32
));
333 /* Make sure device is powered up for SRAM reads */
334 spin_lock_irqsave(&priv
->reg_lock
, reg_flags
);
335 if (iwl_grab_nic_access(priv
)) {
336 spin_unlock_irqrestore(&priv
->reg_lock
, reg_flags
);
340 /* Set starting address; reads will auto-increment */
341 iwl_write32(priv
, HBUS_TARG_MEM_RADDR
, ptr
);
345 * "time" is actually "data" for mode 0 (no timestamp).
346 * place event id # at far right for easier visual parsing.
348 for (i
= 0; i
< num_events
; i
++) {
349 ev
= iwl_read32(priv
, HBUS_TARG_MEM_RDAT
);
350 time
= iwl_read32(priv
, HBUS_TARG_MEM_RDAT
);
352 trace_iwlwifi_dev_ucode_cont_event(priv
,
355 data
= iwl_read32(priv
, HBUS_TARG_MEM_RDAT
);
356 trace_iwlwifi_dev_ucode_cont_event(priv
,
360 /* Allow device to power down */
361 iwl_release_nic_access(priv
);
362 spin_unlock_irqrestore(&priv
->reg_lock
, reg_flags
);
365 static void iwl_continuous_event_trace(struct iwl_priv
*priv
)
367 u32 capacity
; /* event log capacity in # entries */
368 u32 base
; /* SRAM byte address of event log header */
369 u32 mode
; /* 0 - no timestamp, 1 - timestamp recorded */
370 u32 num_wraps
; /* # times uCode wrapped to top of log */
371 u32 next_entry
; /* index of next entry to be written by uCode */
373 base
= priv
->device_pointers
.error_event_table
;
374 if (iwlagn_hw_valid_rtc_data_addr(base
)) {
375 capacity
= iwl_read_targ_mem(priv
, base
);
376 num_wraps
= iwl_read_targ_mem(priv
, base
+ (2 * sizeof(u32
)));
377 mode
= iwl_read_targ_mem(priv
, base
+ (1 * sizeof(u32
)));
378 next_entry
= iwl_read_targ_mem(priv
, base
+ (3 * sizeof(u32
)));
382 if (num_wraps
== priv
->event_log
.num_wraps
) {
383 iwl_print_cont_event_trace(priv
,
384 base
, priv
->event_log
.next_entry
,
385 next_entry
- priv
->event_log
.next_entry
,
387 priv
->event_log
.non_wraps_count
++;
389 if ((num_wraps
- priv
->event_log
.num_wraps
) > 1)
390 priv
->event_log
.wraps_more_count
++;
392 priv
->event_log
.wraps_once_count
++;
393 trace_iwlwifi_dev_ucode_wrap_event(priv
,
394 num_wraps
- priv
->event_log
.num_wraps
,
395 next_entry
, priv
->event_log
.next_entry
);
396 if (next_entry
< priv
->event_log
.next_entry
) {
397 iwl_print_cont_event_trace(priv
, base
,
398 priv
->event_log
.next_entry
,
399 capacity
- priv
->event_log
.next_entry
,
402 iwl_print_cont_event_trace(priv
, base
, 0,
405 iwl_print_cont_event_trace(priv
, base
,
406 next_entry
, capacity
- next_entry
,
409 iwl_print_cont_event_trace(priv
, base
, 0,
413 priv
->event_log
.num_wraps
= num_wraps
;
414 priv
->event_log
.next_entry
= next_entry
;
418 * iwl_bg_ucode_trace - Timer callback to log ucode event
420 * The timer is continually set to execute every
421 * UCODE_TRACE_PERIOD milliseconds after the last timer expired
422 * this function is to perform continuous uCode event logging operation
425 static void iwl_bg_ucode_trace(unsigned long data
)
427 struct iwl_priv
*priv
= (struct iwl_priv
*)data
;
429 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
432 if (priv
->event_log
.ucode_trace
) {
433 iwl_continuous_event_trace(priv
);
434 /* Reschedule the timer to occur in UCODE_TRACE_PERIOD */
435 mod_timer(&priv
->ucode_trace
,
436 jiffies
+ msecs_to_jiffies(UCODE_TRACE_PERIOD
));
440 static void iwl_bg_tx_flush(struct work_struct
*work
)
442 struct iwl_priv
*priv
=
443 container_of(work
, struct iwl_priv
, tx_flush
);
445 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
448 /* do nothing if rf-kill is on */
449 if (!iwl_is_ready_rf(priv
))
452 IWL_DEBUG_INFO(priv
, "device request: flush all tx frames\n");
453 iwlagn_dev_txfifo_flush(priv
, IWL_DROP_ALL
);
456 /*****************************************************************************
460 *****************************************************************************/
462 #ifdef CONFIG_IWLWIFI_DEBUG
465 * The following adds a new attribute to the sysfs representation
466 * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
467 * used for controlling the debug level.
469 * See the level definitions in iwl for details.
471 * The debug_level being managed using sysfs below is a per device debug
472 * level that is used instead of the global debug level if it (the per
473 * device debug level) is set.
475 static ssize_t
show_debug_level(struct device
*d
,
476 struct device_attribute
*attr
, char *buf
)
478 struct iwl_priv
*priv
= dev_get_drvdata(d
);
479 return sprintf(buf
, "0x%08X\n", iwl_get_debug_level(priv
));
481 static ssize_t
store_debug_level(struct device
*d
,
482 struct device_attribute
*attr
,
483 const char *buf
, size_t count
)
485 struct iwl_priv
*priv
= dev_get_drvdata(d
);
489 ret
= strict_strtoul(buf
, 0, &val
);
491 IWL_ERR(priv
, "%s is not in hex or decimal form.\n", buf
);
493 priv
->debug_level
= val
;
494 if (iwl_alloc_traffic_mem(priv
))
496 "Not enough memory to generate traffic log\n");
498 return strnlen(buf
, count
);
501 static DEVICE_ATTR(debug_level
, S_IWUSR
| S_IRUGO
,
502 show_debug_level
, store_debug_level
);
505 #endif /* CONFIG_IWLWIFI_DEBUG */
508 static ssize_t
show_temperature(struct device
*d
,
509 struct device_attribute
*attr
, char *buf
)
511 struct iwl_priv
*priv
= dev_get_drvdata(d
);
513 if (!iwl_is_alive(priv
))
516 return sprintf(buf
, "%d\n", priv
->temperature
);
519 static DEVICE_ATTR(temperature
, S_IRUGO
, show_temperature
, NULL
);
521 static ssize_t
show_tx_power(struct device
*d
,
522 struct device_attribute
*attr
, char *buf
)
524 struct iwl_priv
*priv
= dev_get_drvdata(d
);
526 if (!iwl_is_ready_rf(priv
))
527 return sprintf(buf
, "off\n");
529 return sprintf(buf
, "%d\n", priv
->tx_power_user_lmt
);
532 static ssize_t
store_tx_power(struct device
*d
,
533 struct device_attribute
*attr
,
534 const char *buf
, size_t count
)
536 struct iwl_priv
*priv
= dev_get_drvdata(d
);
540 ret
= strict_strtoul(buf
, 10, &val
);
542 IWL_INFO(priv
, "%s is not in decimal form.\n", buf
);
544 ret
= iwl_set_tx_power(priv
, val
, false);
546 IWL_ERR(priv
, "failed setting tx power (0x%d).\n",
554 static DEVICE_ATTR(tx_power
, S_IWUSR
| S_IRUGO
, show_tx_power
, store_tx_power
);
556 static struct attribute
*iwl_sysfs_entries
[] = {
557 &dev_attr_temperature
.attr
,
558 &dev_attr_tx_power
.attr
,
559 #ifdef CONFIG_IWLWIFI_DEBUG
560 &dev_attr_debug_level
.attr
,
565 static struct attribute_group iwl_attribute_group
= {
566 .name
= NULL
, /* put in device directory */
567 .attrs
= iwl_sysfs_entries
,
570 /******************************************************************************
572 * uCode download functions
574 ******************************************************************************/
576 static void iwl_free_fw_desc(struct iwl_priv
*priv
, struct fw_desc
*desc
)
579 dma_free_coherent(priv
->bus
->dev
, desc
->len
,
580 desc
->v_addr
, desc
->p_addr
);
585 static void iwl_free_fw_img(struct iwl_priv
*priv
, struct fw_img
*img
)
587 iwl_free_fw_desc(priv
, &img
->code
);
588 iwl_free_fw_desc(priv
, &img
->data
);
591 static void iwl_dealloc_ucode(struct iwl_priv
*priv
)
593 iwl_free_fw_img(priv
, &priv
->ucode_rt
);
594 iwl_free_fw_img(priv
, &priv
->ucode_init
);
595 iwl_free_fw_img(priv
, &priv
->ucode_wowlan
);
598 static int iwl_alloc_fw_desc(struct iwl_priv
*priv
, struct fw_desc
*desc
,
599 const void *data
, size_t len
)
606 desc
->v_addr
= dma_alloc_coherent(priv
->bus
->dev
, len
,
607 &desc
->p_addr
, GFP_KERNEL
);
612 memcpy(desc
->v_addr
, data
, len
);
616 static void iwl_init_context(struct iwl_priv
*priv
, u32 ucode_flags
)
618 static const u8 iwlagn_bss_ac_to_fifo
[] = {
624 static const u8 iwlagn_bss_ac_to_queue
[] = {
627 static const u8 iwlagn_pan_ac_to_fifo
[] = {
633 static const u8 iwlagn_pan_ac_to_queue
[] = {
639 * The default context is always valid,
640 * the PAN context depends on uCode.
642 priv
->valid_contexts
= BIT(IWL_RXON_CTX_BSS
);
643 if (ucode_flags
& IWL_UCODE_TLV_FLAGS_PAN
)
644 priv
->valid_contexts
|= BIT(IWL_RXON_CTX_PAN
);
646 for (i
= 0; i
< NUM_IWL_RXON_CTX
; i
++)
647 priv
->contexts
[i
].ctxid
= i
;
649 priv
->contexts
[IWL_RXON_CTX_BSS
].always_active
= true;
650 priv
->contexts
[IWL_RXON_CTX_BSS
].is_active
= true;
651 priv
->contexts
[IWL_RXON_CTX_BSS
].rxon_cmd
= REPLY_RXON
;
652 priv
->contexts
[IWL_RXON_CTX_BSS
].rxon_timing_cmd
= REPLY_RXON_TIMING
;
653 priv
->contexts
[IWL_RXON_CTX_BSS
].rxon_assoc_cmd
= REPLY_RXON_ASSOC
;
654 priv
->contexts
[IWL_RXON_CTX_BSS
].qos_cmd
= REPLY_QOS_PARAM
;
655 priv
->contexts
[IWL_RXON_CTX_BSS
].ap_sta_id
= IWL_AP_ID
;
656 priv
->contexts
[IWL_RXON_CTX_BSS
].wep_key_cmd
= REPLY_WEPKEY
;
657 priv
->contexts
[IWL_RXON_CTX_BSS
].ac_to_fifo
= iwlagn_bss_ac_to_fifo
;
658 priv
->contexts
[IWL_RXON_CTX_BSS
].ac_to_queue
= iwlagn_bss_ac_to_queue
;
659 priv
->contexts
[IWL_RXON_CTX_BSS
].exclusive_interface_modes
=
660 BIT(NL80211_IFTYPE_ADHOC
);
661 priv
->contexts
[IWL_RXON_CTX_BSS
].interface_modes
=
662 BIT(NL80211_IFTYPE_STATION
);
663 priv
->contexts
[IWL_RXON_CTX_BSS
].ap_devtype
= RXON_DEV_TYPE_AP
;
664 priv
->contexts
[IWL_RXON_CTX_BSS
].ibss_devtype
= RXON_DEV_TYPE_IBSS
;
665 priv
->contexts
[IWL_RXON_CTX_BSS
].station_devtype
= RXON_DEV_TYPE_ESS
;
666 priv
->contexts
[IWL_RXON_CTX_BSS
].unused_devtype
= RXON_DEV_TYPE_ESS
;
668 priv
->contexts
[IWL_RXON_CTX_PAN
].rxon_cmd
= REPLY_WIPAN_RXON
;
669 priv
->contexts
[IWL_RXON_CTX_PAN
].rxon_timing_cmd
=
670 REPLY_WIPAN_RXON_TIMING
;
671 priv
->contexts
[IWL_RXON_CTX_PAN
].rxon_assoc_cmd
=
672 REPLY_WIPAN_RXON_ASSOC
;
673 priv
->contexts
[IWL_RXON_CTX_PAN
].qos_cmd
= REPLY_WIPAN_QOS_PARAM
;
674 priv
->contexts
[IWL_RXON_CTX_PAN
].ap_sta_id
= IWL_AP_ID_PAN
;
675 priv
->contexts
[IWL_RXON_CTX_PAN
].wep_key_cmd
= REPLY_WIPAN_WEPKEY
;
676 priv
->contexts
[IWL_RXON_CTX_PAN
].bcast_sta_id
= IWLAGN_PAN_BCAST_ID
;
677 priv
->contexts
[IWL_RXON_CTX_PAN
].station_flags
= STA_FLG_PAN_STATION
;
678 priv
->contexts
[IWL_RXON_CTX_PAN
].ac_to_fifo
= iwlagn_pan_ac_to_fifo
;
679 priv
->contexts
[IWL_RXON_CTX_PAN
].ac_to_queue
= iwlagn_pan_ac_to_queue
;
680 priv
->contexts
[IWL_RXON_CTX_PAN
].mcast_queue
= IWL_IPAN_MCAST_QUEUE
;
681 priv
->contexts
[IWL_RXON_CTX_PAN
].interface_modes
=
682 BIT(NL80211_IFTYPE_STATION
) | BIT(NL80211_IFTYPE_AP
);
684 if (ucode_flags
& IWL_UCODE_TLV_FLAGS_P2P
)
685 priv
->contexts
[IWL_RXON_CTX_PAN
].interface_modes
|=
686 BIT(NL80211_IFTYPE_P2P_CLIENT
) |
687 BIT(NL80211_IFTYPE_P2P_GO
);
689 priv
->contexts
[IWL_RXON_CTX_PAN
].ap_devtype
= RXON_DEV_TYPE_CP
;
690 priv
->contexts
[IWL_RXON_CTX_PAN
].station_devtype
= RXON_DEV_TYPE_2STA
;
691 priv
->contexts
[IWL_RXON_CTX_PAN
].unused_devtype
= RXON_DEV_TYPE_P2P
;
693 BUILD_BUG_ON(NUM_IWL_RXON_CTX
!= 2);
697 struct iwlagn_ucode_capabilities
{
698 u32 max_probe_length
;
699 u32 standard_phy_calibration_size
;
703 static void iwl_ucode_callback(const struct firmware
*ucode_raw
, void *context
);
704 static int iwl_mac_setup_register(struct iwl_priv
*priv
,
705 struct iwlagn_ucode_capabilities
*capa
);
707 #define UCODE_EXPERIMENTAL_INDEX 100
708 #define UCODE_EXPERIMENTAL_TAG "exp"
710 static int __must_check
iwl_request_firmware(struct iwl_priv
*priv
, bool first
)
712 const char *name_pre
= priv
->cfg
->fw_name_pre
;
716 #ifdef CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE
717 priv
->fw_index
= UCODE_EXPERIMENTAL_INDEX
;
718 strcpy(tag
, UCODE_EXPERIMENTAL_TAG
);
719 } else if (priv
->fw_index
== UCODE_EXPERIMENTAL_INDEX
) {
721 priv
->fw_index
= priv
->cfg
->ucode_api_max
;
722 sprintf(tag
, "%d", priv
->fw_index
);
725 sprintf(tag
, "%d", priv
->fw_index
);
728 if (priv
->fw_index
< priv
->cfg
->ucode_api_min
) {
729 IWL_ERR(priv
, "no suitable firmware found!\n");
733 sprintf(priv
->firmware_name
, "%s%s%s", name_pre
, tag
, ".ucode");
735 IWL_DEBUG_INFO(priv
, "attempting to load firmware %s'%s'\n",
736 (priv
->fw_index
== UCODE_EXPERIMENTAL_INDEX
)
737 ? "EXPERIMENTAL " : "",
738 priv
->firmware_name
);
740 return request_firmware_nowait(THIS_MODULE
, 1, priv
->firmware_name
,
742 GFP_KERNEL
, priv
, iwl_ucode_callback
);
745 struct iwlagn_firmware_pieces
{
746 const void *inst
, *data
, *init
, *init_data
, *wowlan_inst
, *wowlan_data
;
747 size_t inst_size
, data_size
, init_size
, init_data_size
,
748 wowlan_inst_size
, wowlan_data_size
;
752 u32 init_evtlog_ptr
, init_evtlog_size
, init_errlog_ptr
;
753 u32 inst_evtlog_ptr
, inst_evtlog_size
, inst_errlog_ptr
;
756 static int iwlagn_load_legacy_firmware(struct iwl_priv
*priv
,
757 const struct firmware
*ucode_raw
,
758 struct iwlagn_firmware_pieces
*pieces
)
760 struct iwl_ucode_header
*ucode
= (void *)ucode_raw
->data
;
761 u32 api_ver
, hdr_size
;
764 priv
->ucode_ver
= le32_to_cpu(ucode
->ver
);
765 api_ver
= IWL_UCODE_API(priv
->ucode_ver
);
770 if (ucode_raw
->size
< hdr_size
) {
771 IWL_ERR(priv
, "File size too small!\n");
774 pieces
->build
= le32_to_cpu(ucode
->u
.v2
.build
);
775 pieces
->inst_size
= le32_to_cpu(ucode
->u
.v2
.inst_size
);
776 pieces
->data_size
= le32_to_cpu(ucode
->u
.v2
.data_size
);
777 pieces
->init_size
= le32_to_cpu(ucode
->u
.v2
.init_size
);
778 pieces
->init_data_size
= le32_to_cpu(ucode
->u
.v2
.init_data_size
);
779 src
= ucode
->u
.v2
.data
;
785 if (ucode_raw
->size
< hdr_size
) {
786 IWL_ERR(priv
, "File size too small!\n");
790 pieces
->inst_size
= le32_to_cpu(ucode
->u
.v1
.inst_size
);
791 pieces
->data_size
= le32_to_cpu(ucode
->u
.v1
.data_size
);
792 pieces
->init_size
= le32_to_cpu(ucode
->u
.v1
.init_size
);
793 pieces
->init_data_size
= le32_to_cpu(ucode
->u
.v1
.init_data_size
);
794 src
= ucode
->u
.v1
.data
;
798 /* Verify size of file vs. image size info in file's header */
799 if (ucode_raw
->size
!= hdr_size
+ pieces
->inst_size
+
800 pieces
->data_size
+ pieces
->init_size
+
801 pieces
->init_data_size
) {
804 "uCode file size %d does not match expected size\n",
805 (int)ucode_raw
->size
);
810 src
+= pieces
->inst_size
;
812 src
+= pieces
->data_size
;
814 src
+= pieces
->init_size
;
815 pieces
->init_data
= src
;
816 src
+= pieces
->init_data_size
;
821 static int iwlagn_wanted_ucode_alternative
= 1;
823 static int iwlagn_load_firmware(struct iwl_priv
*priv
,
824 const struct firmware
*ucode_raw
,
825 struct iwlagn_firmware_pieces
*pieces
,
826 struct iwlagn_ucode_capabilities
*capa
)
828 struct iwl_tlv_ucode_header
*ucode
= (void *)ucode_raw
->data
;
829 struct iwl_ucode_tlv
*tlv
;
830 size_t len
= ucode_raw
->size
;
832 int wanted_alternative
= iwlagn_wanted_ucode_alternative
, tmp
;
835 enum iwl_ucode_tlv_type tlv_type
;
838 if (len
< sizeof(*ucode
)) {
839 IWL_ERR(priv
, "uCode has invalid length: %zd\n", len
);
843 if (ucode
->magic
!= cpu_to_le32(IWL_TLV_UCODE_MAGIC
)) {
844 IWL_ERR(priv
, "invalid uCode magic: 0X%x\n",
845 le32_to_cpu(ucode
->magic
));
850 * Check which alternatives are present, and "downgrade"
851 * when the chosen alternative is not present, warning
852 * the user when that happens. Some files may not have
853 * any alternatives, so don't warn in that case.
855 alternatives
= le64_to_cpu(ucode
->alternatives
);
856 tmp
= wanted_alternative
;
857 if (wanted_alternative
> 63)
858 wanted_alternative
= 63;
859 while (wanted_alternative
&& !(alternatives
& BIT(wanted_alternative
)))
860 wanted_alternative
--;
861 if (wanted_alternative
&& wanted_alternative
!= tmp
)
863 "uCode alternative %d not available, choosing %d\n",
864 tmp
, wanted_alternative
);
866 priv
->ucode_ver
= le32_to_cpu(ucode
->ver
);
867 pieces
->build
= le32_to_cpu(ucode
->build
);
870 len
-= sizeof(*ucode
);
872 while (len
>= sizeof(*tlv
)) {
878 tlv_len
= le32_to_cpu(tlv
->length
);
879 tlv_type
= le16_to_cpu(tlv
->type
);
880 tlv_alt
= le16_to_cpu(tlv
->alternative
);
881 tlv_data
= tlv
->data
;
884 IWL_ERR(priv
, "invalid TLV len: %zd/%u\n",
888 len
-= ALIGN(tlv_len
, 4);
889 data
+= sizeof(*tlv
) + ALIGN(tlv_len
, 4);
892 * Alternative 0 is always valid.
894 * Skip alternative TLVs that are not selected.
896 if (tlv_alt
!= 0 && tlv_alt
!= wanted_alternative
)
900 case IWL_UCODE_TLV_INST
:
901 pieces
->inst
= tlv_data
;
902 pieces
->inst_size
= tlv_len
;
904 case IWL_UCODE_TLV_DATA
:
905 pieces
->data
= tlv_data
;
906 pieces
->data_size
= tlv_len
;
908 case IWL_UCODE_TLV_INIT
:
909 pieces
->init
= tlv_data
;
910 pieces
->init_size
= tlv_len
;
912 case IWL_UCODE_TLV_INIT_DATA
:
913 pieces
->init_data
= tlv_data
;
914 pieces
->init_data_size
= tlv_len
;
916 case IWL_UCODE_TLV_BOOT
:
917 IWL_ERR(priv
, "Found unexpected BOOT ucode\n");
919 case IWL_UCODE_TLV_PROBE_MAX_LEN
:
920 if (tlv_len
!= sizeof(u32
))
921 goto invalid_tlv_len
;
922 capa
->max_probe_length
=
923 le32_to_cpup((__le32
*)tlv_data
);
925 case IWL_UCODE_TLV_PAN
:
927 goto invalid_tlv_len
;
928 capa
->flags
|= IWL_UCODE_TLV_FLAGS_PAN
;
930 case IWL_UCODE_TLV_FLAGS
:
931 /* must be at least one u32 */
932 if (tlv_len
< sizeof(u32
))
933 goto invalid_tlv_len
;
934 /* and a proper number of u32s */
935 if (tlv_len
% sizeof(u32
))
936 goto invalid_tlv_len
;
938 * This driver only reads the first u32 as
939 * right now no more features are defined,
940 * if that changes then either the driver
941 * will not work with the new firmware, or
942 * it'll not take advantage of new features.
944 capa
->flags
= le32_to_cpup((__le32
*)tlv_data
);
946 case IWL_UCODE_TLV_INIT_EVTLOG_PTR
:
947 if (tlv_len
!= sizeof(u32
))
948 goto invalid_tlv_len
;
949 pieces
->init_evtlog_ptr
=
950 le32_to_cpup((__le32
*)tlv_data
);
952 case IWL_UCODE_TLV_INIT_EVTLOG_SIZE
:
953 if (tlv_len
!= sizeof(u32
))
954 goto invalid_tlv_len
;
955 pieces
->init_evtlog_size
=
956 le32_to_cpup((__le32
*)tlv_data
);
958 case IWL_UCODE_TLV_INIT_ERRLOG_PTR
:
959 if (tlv_len
!= sizeof(u32
))
960 goto invalid_tlv_len
;
961 pieces
->init_errlog_ptr
=
962 le32_to_cpup((__le32
*)tlv_data
);
964 case IWL_UCODE_TLV_RUNT_EVTLOG_PTR
:
965 if (tlv_len
!= sizeof(u32
))
966 goto invalid_tlv_len
;
967 pieces
->inst_evtlog_ptr
=
968 le32_to_cpup((__le32
*)tlv_data
);
970 case IWL_UCODE_TLV_RUNT_EVTLOG_SIZE
:
971 if (tlv_len
!= sizeof(u32
))
972 goto invalid_tlv_len
;
973 pieces
->inst_evtlog_size
=
974 le32_to_cpup((__le32
*)tlv_data
);
976 case IWL_UCODE_TLV_RUNT_ERRLOG_PTR
:
977 if (tlv_len
!= sizeof(u32
))
978 goto invalid_tlv_len
;
979 pieces
->inst_errlog_ptr
=
980 le32_to_cpup((__le32
*)tlv_data
);
982 case IWL_UCODE_TLV_ENHANCE_SENS_TBL
:
984 goto invalid_tlv_len
;
985 priv
->enhance_sensitivity_table
= true;
987 case IWL_UCODE_TLV_WOWLAN_INST
:
988 pieces
->wowlan_inst
= tlv_data
;
989 pieces
->wowlan_inst_size
= tlv_len
;
991 case IWL_UCODE_TLV_WOWLAN_DATA
:
992 pieces
->wowlan_data
= tlv_data
;
993 pieces
->wowlan_data_size
= tlv_len
;
995 case IWL_UCODE_TLV_PHY_CALIBRATION_SIZE
:
996 if (tlv_len
!= sizeof(u32
))
997 goto invalid_tlv_len
;
998 capa
->standard_phy_calibration_size
=
999 le32_to_cpup((__le32
*)tlv_data
);
1002 IWL_DEBUG_INFO(priv
, "unknown TLV: %d\n", tlv_type
);
1008 IWL_ERR(priv
, "invalid TLV after parsing: %zd\n", len
);
1009 iwl_print_hex_dump(priv
, IWL_DL_FW
, (u8
*)data
, len
);
1016 IWL_ERR(priv
, "TLV %d has invalid size: %u\n", tlv_type
, tlv_len
);
1017 iwl_print_hex_dump(priv
, IWL_DL_FW
, tlv_data
, tlv_len
);
1023 * iwl_ucode_callback - callback when firmware was loaded
1025 * If loaded successfully, copies the firmware into buffers
1026 * for the card to fetch (via DMA).
1028 static void iwl_ucode_callback(const struct firmware
*ucode_raw
, void *context
)
1030 struct iwl_priv
*priv
= context
;
1031 struct iwl_ucode_header
*ucode
;
1033 struct iwlagn_firmware_pieces pieces
;
1034 const unsigned int api_max
= priv
->cfg
->ucode_api_max
;
1035 unsigned int api_ok
= priv
->cfg
->ucode_api_ok
;
1036 const unsigned int api_min
= priv
->cfg
->ucode_api_min
;
1040 struct iwlagn_ucode_capabilities ucode_capa
= {
1041 .max_probe_length
= 200,
1042 .standard_phy_calibration_size
=
1043 IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE
,
1049 memset(&pieces
, 0, sizeof(pieces
));
1052 if (priv
->fw_index
<= api_ok
)
1054 "request for firmware file '%s' failed.\n",
1055 priv
->firmware_name
);
1059 IWL_DEBUG_INFO(priv
, "Loaded firmware file '%s' (%zd bytes).\n",
1060 priv
->firmware_name
, ucode_raw
->size
);
1062 /* Make sure that we got at least the API version number */
1063 if (ucode_raw
->size
< 4) {
1064 IWL_ERR(priv
, "File size way too small!\n");
1068 /* Data from ucode file: header followed by uCode images */
1069 ucode
= (struct iwl_ucode_header
*)ucode_raw
->data
;
1072 err
= iwlagn_load_legacy_firmware(priv
, ucode_raw
, &pieces
);
1074 err
= iwlagn_load_firmware(priv
, ucode_raw
, &pieces
,
1080 api_ver
= IWL_UCODE_API(priv
->ucode_ver
);
1081 build
= pieces
.build
;
1084 * api_ver should match the api version forming part of the
1085 * firmware filename ... but we don't check for that and only rely
1086 * on the API version read from firmware header from here on forward
1088 /* no api version check required for experimental uCode */
1089 if (priv
->fw_index
!= UCODE_EXPERIMENTAL_INDEX
) {
1090 if (api_ver
< api_min
|| api_ver
> api_max
) {
1092 "Driver unable to support your firmware API. "
1093 "Driver supports v%u, firmware is v%u.\n",
1098 if (api_ver
< api_ok
) {
1099 if (api_ok
!= api_max
)
1100 IWL_ERR(priv
, "Firmware has old API version, "
1101 "expected v%u through v%u, got v%u.\n",
1102 api_ok
, api_max
, api_ver
);
1104 IWL_ERR(priv
, "Firmware has old API version, "
1105 "expected v%u, got v%u.\n",
1107 IWL_ERR(priv
, "New firmware can be obtained from "
1108 "http://www.intellinuxwireless.org/.\n");
1113 sprintf(buildstr
, " build %u%s", build
,
1114 (priv
->fw_index
== UCODE_EXPERIMENTAL_INDEX
)
1119 IWL_INFO(priv
, "loaded firmware version %u.%u.%u.%u%s\n",
1120 IWL_UCODE_MAJOR(priv
->ucode_ver
),
1121 IWL_UCODE_MINOR(priv
->ucode_ver
),
1122 IWL_UCODE_API(priv
->ucode_ver
),
1123 IWL_UCODE_SERIAL(priv
->ucode_ver
),
1126 snprintf(priv
->hw
->wiphy
->fw_version
,
1127 sizeof(priv
->hw
->wiphy
->fw_version
),
1129 IWL_UCODE_MAJOR(priv
->ucode_ver
),
1130 IWL_UCODE_MINOR(priv
->ucode_ver
),
1131 IWL_UCODE_API(priv
->ucode_ver
),
1132 IWL_UCODE_SERIAL(priv
->ucode_ver
),
1136 * For any of the failures below (before allocating pci memory)
1137 * we will try to load a version with a smaller API -- maybe the
1138 * user just got a corrupted version of the latest API.
1141 IWL_DEBUG_INFO(priv
, "f/w package hdr ucode version raw = 0x%x\n",
1143 IWL_DEBUG_INFO(priv
, "f/w package hdr runtime inst size = %Zd\n",
1145 IWL_DEBUG_INFO(priv
, "f/w package hdr runtime data size = %Zd\n",
1147 IWL_DEBUG_INFO(priv
, "f/w package hdr init inst size = %Zd\n",
1149 IWL_DEBUG_INFO(priv
, "f/w package hdr init data size = %Zd\n",
1150 pieces
.init_data_size
);
1152 /* Verify that uCode images will fit in card's SRAM */
1153 if (pieces
.inst_size
> priv
->hw_params
.max_inst_size
) {
1154 IWL_ERR(priv
, "uCode instr len %Zd too large to fit in\n",
1159 if (pieces
.data_size
> priv
->hw_params
.max_data_size
) {
1160 IWL_ERR(priv
, "uCode data len %Zd too large to fit in\n",
1165 if (pieces
.init_size
> priv
->hw_params
.max_inst_size
) {
1166 IWL_ERR(priv
, "uCode init instr len %Zd too large to fit in\n",
1171 if (pieces
.init_data_size
> priv
->hw_params
.max_data_size
) {
1172 IWL_ERR(priv
, "uCode init data len %Zd too large to fit in\n",
1173 pieces
.init_data_size
);
1177 /* Allocate ucode buffers for card's bus-master loading ... */
1179 /* Runtime instructions and 2 copies of data:
1180 * 1) unmodified from disk
1181 * 2) backup cache for save/restore during power-downs */
1182 if (iwl_alloc_fw_desc(priv
, &priv
->ucode_rt
.code
,
1183 pieces
.inst
, pieces
.inst_size
))
1185 if (iwl_alloc_fw_desc(priv
, &priv
->ucode_rt
.data
,
1186 pieces
.data
, pieces
.data_size
))
1189 /* Initialization instructions and data */
1190 if (pieces
.init_size
&& pieces
.init_data_size
) {
1191 if (iwl_alloc_fw_desc(priv
, &priv
->ucode_init
.code
,
1192 pieces
.init
, pieces
.init_size
))
1194 if (iwl_alloc_fw_desc(priv
, &priv
->ucode_init
.data
,
1195 pieces
.init_data
, pieces
.init_data_size
))
1199 /* WoWLAN instructions and data */
1200 if (pieces
.wowlan_inst_size
&& pieces
.wowlan_data_size
) {
1201 if (iwl_alloc_fw_desc(priv
, &priv
->ucode_wowlan
.code
,
1203 pieces
.wowlan_inst_size
))
1205 if (iwl_alloc_fw_desc(priv
, &priv
->ucode_wowlan
.data
,
1207 pieces
.wowlan_data_size
))
1211 /* Now that we can no longer fail, copy information */
1214 * The (size - 16) / 12 formula is based on the information recorded
1215 * for each event, which is of mode 1 (including timestamp) for all
1216 * new microcodes that include this information.
1218 priv
->init_evtlog_ptr
= pieces
.init_evtlog_ptr
;
1219 if (pieces
.init_evtlog_size
)
1220 priv
->init_evtlog_size
= (pieces
.init_evtlog_size
- 16)/12;
1222 priv
->init_evtlog_size
=
1223 priv
->cfg
->base_params
->max_event_log_size
;
1224 priv
->init_errlog_ptr
= pieces
.init_errlog_ptr
;
1225 priv
->inst_evtlog_ptr
= pieces
.inst_evtlog_ptr
;
1226 if (pieces
.inst_evtlog_size
)
1227 priv
->inst_evtlog_size
= (pieces
.inst_evtlog_size
- 16)/12;
1229 priv
->inst_evtlog_size
=
1230 priv
->cfg
->base_params
->max_event_log_size
;
1231 priv
->inst_errlog_ptr
= pieces
.inst_errlog_ptr
;
1233 priv
->new_scan_threshold_behaviour
=
1234 !!(ucode_capa
.flags
& IWL_UCODE_TLV_FLAGS_NEWSCAN
);
1236 if (!(priv
->cfg
->sku
& EEPROM_SKU_CAP_IPAN_ENABLE
))
1237 ucode_capa
.flags
&= ~IWL_UCODE_TLV_FLAGS_PAN
;
1240 * if not PAN, then don't support P2P -- might be a uCode
1241 * packaging bug or due to the eeprom check above
1243 if (!(ucode_capa
.flags
& IWL_UCODE_TLV_FLAGS_PAN
))
1244 ucode_capa
.flags
&= ~IWL_UCODE_TLV_FLAGS_P2P
;
1246 if (ucode_capa
.flags
& IWL_UCODE_TLV_FLAGS_PAN
) {
1247 priv
->sta_key_max_num
= STA_KEY_MAX_NUM_PAN
;
1248 priv
->cmd_queue
= IWL_IPAN_CMD_QUEUE_NUM
;
1250 priv
->sta_key_max_num
= STA_KEY_MAX_NUM
;
1251 priv
->cmd_queue
= IWL_DEFAULT_CMD_QUEUE_NUM
;
1255 * figure out the offset of chain noise reset and gain commands
1256 * base on the size of standard phy calibration commands table size
1258 if (ucode_capa
.standard_phy_calibration_size
>
1259 IWL_MAX_PHY_CALIBRATE_TBL_SIZE
)
1260 ucode_capa
.standard_phy_calibration_size
=
1261 IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE
;
1263 priv
->phy_calib_chain_noise_reset_cmd
=
1264 ucode_capa
.standard_phy_calibration_size
;
1265 priv
->phy_calib_chain_noise_gain_cmd
=
1266 ucode_capa
.standard_phy_calibration_size
+ 1;
1268 /* initialize all valid contexts */
1269 iwl_init_context(priv
, ucode_capa
.flags
);
1271 /**************************************************
1272 * This is still part of probe() in a sense...
1274 * 9. Setup and register with mac80211 and debugfs
1275 **************************************************/
1276 err
= iwl_mac_setup_register(priv
, &ucode_capa
);
1280 err
= iwl_dbgfs_register(priv
, DRV_NAME
);
1282 IWL_ERR(priv
, "failed to create debugfs files. Ignoring error: %d\n", err
);
1284 err
= sysfs_create_group(&(priv
->bus
->dev
->kobj
),
1285 &iwl_attribute_group
);
1287 IWL_ERR(priv
, "failed to create sysfs device attributes\n");
1291 /* We have our copies now, allow OS release its copies */
1292 release_firmware(ucode_raw
);
1293 complete(&priv
->firmware_loading_complete
);
1297 /* try next, if any */
1298 if (iwl_request_firmware(priv
, false))
1300 release_firmware(ucode_raw
);
1304 IWL_ERR(priv
, "failed to allocate pci memory\n");
1305 iwl_dealloc_ucode(priv
);
1307 complete(&priv
->firmware_loading_complete
);
1308 device_release_driver(priv
->bus
->dev
);
1309 release_firmware(ucode_raw
);
1312 static const char * const desc_lookup_text
[] = {
1317 "NMI_INTERRUPT_WDG",
1321 "HW_ERROR_TUNE_LOCK",
1322 "HW_ERROR_TEMPERATURE",
1323 "ILLEGAL_CHAN_FREQ",
1326 "NMI_INTERRUPT_HOST",
1327 "NMI_INTERRUPT_ACTION_PT",
1328 "NMI_INTERRUPT_UNKNOWN",
1329 "UCODE_VERSION_MISMATCH",
1330 "HW_ERROR_ABS_LOCK",
1331 "HW_ERROR_CAL_LOCK_FAIL",
1332 "NMI_INTERRUPT_INST_ACTION_PT",
1333 "NMI_INTERRUPT_DATA_ACTION_PT",
1335 "NMI_INTERRUPT_TRM",
1336 "NMI_INTERRUPT_BREAK_POINT",
1343 static struct { char *name
; u8 num
; } advanced_lookup
[] = {
1344 { "NMI_INTERRUPT_WDG", 0x34 },
1345 { "SYSASSERT", 0x35 },
1346 { "UCODE_VERSION_MISMATCH", 0x37 },
1347 { "BAD_COMMAND", 0x38 },
1348 { "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C },
1349 { "FATAL_ERROR", 0x3D },
1350 { "NMI_TRM_HW_ERR", 0x46 },
1351 { "NMI_INTERRUPT_TRM", 0x4C },
1352 { "NMI_INTERRUPT_BREAK_POINT", 0x54 },
1353 { "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C },
1354 { "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64 },
1355 { "NMI_INTERRUPT_HOST", 0x66 },
1356 { "NMI_INTERRUPT_ACTION_PT", 0x7C },
1357 { "NMI_INTERRUPT_UNKNOWN", 0x84 },
1358 { "NMI_INTERRUPT_INST_ACTION_PT", 0x86 },
1359 { "ADVANCED_SYSASSERT", 0 },
1362 static const char *desc_lookup(u32 num
)
1365 int max
= ARRAY_SIZE(desc_lookup_text
);
1368 return desc_lookup_text
[num
];
1370 max
= ARRAY_SIZE(advanced_lookup
) - 1;
1371 for (i
= 0; i
< max
; i
++) {
1372 if (advanced_lookup
[i
].num
== num
)
1375 return advanced_lookup
[i
].name
;
1378 #define ERROR_START_OFFSET (1 * sizeof(u32))
1379 #define ERROR_ELEM_SIZE (7 * sizeof(u32))
1381 void iwl_dump_nic_error_log(struct iwl_priv
*priv
)
1384 struct iwl_error_event_table table
;
1386 base
= priv
->device_pointers
.error_event_table
;
1387 if (priv
->ucode_type
== IWL_UCODE_INIT
) {
1389 base
= priv
->init_errlog_ptr
;
1392 base
= priv
->inst_errlog_ptr
;
1395 if (!iwlagn_hw_valid_rtc_data_addr(base
)) {
1397 "Not valid error log pointer 0x%08X for %s uCode\n",
1399 (priv
->ucode_type
== IWL_UCODE_INIT
)
1404 iwl_read_targ_mem_words(priv
, base
, &table
, sizeof(table
));
1406 if (ERROR_START_OFFSET
<= table
.valid
* ERROR_ELEM_SIZE
) {
1407 IWL_ERR(priv
, "Start IWL Error Log Dump:\n");
1408 IWL_ERR(priv
, "Status: 0x%08lX, count: %d\n",
1409 priv
->status
, table
.valid
);
1412 priv
->isr_stats
.err_code
= table
.error_id
;
1414 trace_iwlwifi_dev_ucode_error(priv
, table
.error_id
, table
.tsf_low
,
1415 table
.data1
, table
.data2
, table
.line
,
1416 table
.blink1
, table
.blink2
, table
.ilink1
,
1417 table
.ilink2
, table
.bcon_time
, table
.gp1
,
1418 table
.gp2
, table
.gp3
, table
.ucode_ver
,
1419 table
.hw_ver
, table
.brd_ver
);
1420 IWL_ERR(priv
, "0x%08X | %-28s\n", table
.error_id
,
1421 desc_lookup(table
.error_id
));
1422 IWL_ERR(priv
, "0x%08X | uPc\n", table
.pc
);
1423 IWL_ERR(priv
, "0x%08X | branchlink1\n", table
.blink1
);
1424 IWL_ERR(priv
, "0x%08X | branchlink2\n", table
.blink2
);
1425 IWL_ERR(priv
, "0x%08X | interruptlink1\n", table
.ilink1
);
1426 IWL_ERR(priv
, "0x%08X | interruptlink2\n", table
.ilink2
);
1427 IWL_ERR(priv
, "0x%08X | data1\n", table
.data1
);
1428 IWL_ERR(priv
, "0x%08X | data2\n", table
.data2
);
1429 IWL_ERR(priv
, "0x%08X | line\n", table
.line
);
1430 IWL_ERR(priv
, "0x%08X | beacon time\n", table
.bcon_time
);
1431 IWL_ERR(priv
, "0x%08X | tsf low\n", table
.tsf_low
);
1432 IWL_ERR(priv
, "0x%08X | tsf hi\n", table
.tsf_hi
);
1433 IWL_ERR(priv
, "0x%08X | time gp1\n", table
.gp1
);
1434 IWL_ERR(priv
, "0x%08X | time gp2\n", table
.gp2
);
1435 IWL_ERR(priv
, "0x%08X | time gp3\n", table
.gp3
);
1436 IWL_ERR(priv
, "0x%08X | uCode version\n", table
.ucode_ver
);
1437 IWL_ERR(priv
, "0x%08X | hw version\n", table
.hw_ver
);
1438 IWL_ERR(priv
, "0x%08X | board version\n", table
.brd_ver
);
1439 IWL_ERR(priv
, "0x%08X | hcmd\n", table
.hcmd
);
1442 #define EVENT_START_OFFSET (4 * sizeof(u32))
1445 * iwl_print_event_log - Dump error event log to syslog
1448 static int iwl_print_event_log(struct iwl_priv
*priv
, u32 start_idx
,
1449 u32 num_events
, u32 mode
,
1450 int pos
, char **buf
, size_t bufsz
)
1453 u32 base
; /* SRAM byte address of event log header */
1454 u32 event_size
; /* 2 u32s, or 3 u32s if timestamp recorded */
1455 u32 ptr
; /* SRAM byte address of log data */
1456 u32 ev
, time
, data
; /* event log data */
1457 unsigned long reg_flags
;
1459 if (num_events
== 0)
1462 base
= priv
->device_pointers
.log_event_table
;
1463 if (priv
->ucode_type
== IWL_UCODE_INIT
) {
1465 base
= priv
->init_evtlog_ptr
;
1468 base
= priv
->inst_evtlog_ptr
;
1472 event_size
= 2 * sizeof(u32
);
1474 event_size
= 3 * sizeof(u32
);
1476 ptr
= base
+ EVENT_START_OFFSET
+ (start_idx
* event_size
);
1478 /* Make sure device is powered up for SRAM reads */
1479 spin_lock_irqsave(&priv
->reg_lock
, reg_flags
);
1480 iwl_grab_nic_access(priv
);
1482 /* Set starting address; reads will auto-increment */
1483 iwl_write32(priv
, HBUS_TARG_MEM_RADDR
, ptr
);
1486 /* "time" is actually "data" for mode 0 (no timestamp).
1487 * place event id # at far right for easier visual parsing. */
1488 for (i
= 0; i
< num_events
; i
++) {
1489 ev
= iwl_read32(priv
, HBUS_TARG_MEM_RDAT
);
1490 time
= iwl_read32(priv
, HBUS_TARG_MEM_RDAT
);
1494 pos
+= scnprintf(*buf
+ pos
, bufsz
- pos
,
1495 "EVT_LOG:0x%08x:%04u\n",
1498 trace_iwlwifi_dev_ucode_event(priv
, 0,
1500 IWL_ERR(priv
, "EVT_LOG:0x%08x:%04u\n",
1504 data
= iwl_read32(priv
, HBUS_TARG_MEM_RDAT
);
1506 pos
+= scnprintf(*buf
+ pos
, bufsz
- pos
,
1507 "EVT_LOGT:%010u:0x%08x:%04u\n",
1510 IWL_ERR(priv
, "EVT_LOGT:%010u:0x%08x:%04u\n",
1512 trace_iwlwifi_dev_ucode_event(priv
, time
,
1518 /* Allow device to power down */
1519 iwl_release_nic_access(priv
);
1520 spin_unlock_irqrestore(&priv
->reg_lock
, reg_flags
);
1525 * iwl_print_last_event_logs - Dump the newest # of event log to syslog
1527 static int iwl_print_last_event_logs(struct iwl_priv
*priv
, u32 capacity
,
1528 u32 num_wraps
, u32 next_entry
,
1530 int pos
, char **buf
, size_t bufsz
)
1533 * display the newest DEFAULT_LOG_ENTRIES entries
1534 * i.e the entries just before the next ont that uCode would fill.
1537 if (next_entry
< size
) {
1538 pos
= iwl_print_event_log(priv
,
1539 capacity
- (size
- next_entry
),
1540 size
- next_entry
, mode
,
1542 pos
= iwl_print_event_log(priv
, 0,
1546 pos
= iwl_print_event_log(priv
, next_entry
- size
,
1547 size
, mode
, pos
, buf
, bufsz
);
1549 if (next_entry
< size
) {
1550 pos
= iwl_print_event_log(priv
, 0, next_entry
,
1551 mode
, pos
, buf
, bufsz
);
1553 pos
= iwl_print_event_log(priv
, next_entry
- size
,
1554 size
, mode
, pos
, buf
, bufsz
);
1560 #define DEFAULT_DUMP_EVENT_LOG_ENTRIES (20)
1562 int iwl_dump_nic_event_log(struct iwl_priv
*priv
, bool full_log
,
1563 char **buf
, bool display
)
1565 u32 base
; /* SRAM byte address of event log header */
1566 u32 capacity
; /* event log capacity in # entries */
1567 u32 mode
; /* 0 - no timestamp, 1 - timestamp recorded */
1568 u32 num_wraps
; /* # times uCode wrapped to top of log */
1569 u32 next_entry
; /* index of next entry to be written by uCode */
1570 u32 size
; /* # entries that we'll print */
1575 base
= priv
->device_pointers
.log_event_table
;
1576 if (priv
->ucode_type
== IWL_UCODE_INIT
) {
1577 logsize
= priv
->init_evtlog_size
;
1579 base
= priv
->init_evtlog_ptr
;
1581 logsize
= priv
->inst_evtlog_size
;
1583 base
= priv
->inst_evtlog_ptr
;
1586 if (!iwlagn_hw_valid_rtc_data_addr(base
)) {
1588 "Invalid event log pointer 0x%08X for %s uCode\n",
1590 (priv
->ucode_type
== IWL_UCODE_INIT
)
1595 /* event log header */
1596 capacity
= iwl_read_targ_mem(priv
, base
);
1597 mode
= iwl_read_targ_mem(priv
, base
+ (1 * sizeof(u32
)));
1598 num_wraps
= iwl_read_targ_mem(priv
, base
+ (2 * sizeof(u32
)));
1599 next_entry
= iwl_read_targ_mem(priv
, base
+ (3 * sizeof(u32
)));
1601 if (capacity
> logsize
) {
1602 IWL_ERR(priv
, "Log capacity %d is bogus, limit to %d entries\n",
1607 if (next_entry
> logsize
) {
1608 IWL_ERR(priv
, "Log write index %d is bogus, limit to %d\n",
1609 next_entry
, logsize
);
1610 next_entry
= logsize
;
1613 size
= num_wraps
? capacity
: next_entry
;
1615 /* bail out if nothing in log */
1617 IWL_ERR(priv
, "Start IWL Event Log Dump: nothing in log\n");
1621 /* enable/disable bt channel inhibition */
1622 priv
->bt_ch_announce
= iwlagn_bt_ch_announce
;
1624 #ifdef CONFIG_IWLWIFI_DEBUG
1625 if (!(iwl_get_debug_level(priv
) & IWL_DL_FW_ERRORS
) && !full_log
)
1626 size
= (size
> DEFAULT_DUMP_EVENT_LOG_ENTRIES
)
1627 ? DEFAULT_DUMP_EVENT_LOG_ENTRIES
: size
;
1629 size
= (size
> DEFAULT_DUMP_EVENT_LOG_ENTRIES
)
1630 ? DEFAULT_DUMP_EVENT_LOG_ENTRIES
: size
;
1632 IWL_ERR(priv
, "Start IWL Event Log Dump: display last %u entries\n",
1635 #ifdef CONFIG_IWLWIFI_DEBUG
1638 bufsz
= capacity
* 48;
1641 *buf
= kmalloc(bufsz
, GFP_KERNEL
);
1645 if ((iwl_get_debug_level(priv
) & IWL_DL_FW_ERRORS
) || full_log
) {
1647 * if uCode has wrapped back to top of log,
1648 * start at the oldest entry,
1649 * i.e the next one that uCode would fill.
1652 pos
= iwl_print_event_log(priv
, next_entry
,
1653 capacity
- next_entry
, mode
,
1655 /* (then/else) start at top of log */
1656 pos
= iwl_print_event_log(priv
, 0,
1657 next_entry
, mode
, pos
, buf
, bufsz
);
1659 pos
= iwl_print_last_event_logs(priv
, capacity
, num_wraps
,
1660 next_entry
, size
, mode
,
1663 pos
= iwl_print_last_event_logs(priv
, capacity
, num_wraps
,
1664 next_entry
, size
, mode
,
1670 static void iwl_rf_kill_ct_config(struct iwl_priv
*priv
)
1672 struct iwl_ct_kill_config cmd
;
1673 struct iwl_ct_kill_throttling_config adv_cmd
;
1674 unsigned long flags
;
1677 spin_lock_irqsave(&priv
->lock
, flags
);
1678 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
,
1679 CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT
);
1680 spin_unlock_irqrestore(&priv
->lock
, flags
);
1681 priv
->thermal_throttle
.ct_kill_toggle
= false;
1683 if (priv
->cfg
->base_params
->support_ct_kill_exit
) {
1684 adv_cmd
.critical_temperature_enter
=
1685 cpu_to_le32(priv
->hw_params
.ct_kill_threshold
);
1686 adv_cmd
.critical_temperature_exit
=
1687 cpu_to_le32(priv
->hw_params
.ct_kill_exit_threshold
);
1689 ret
= trans_send_cmd_pdu(&priv
->trans
,
1690 REPLY_CT_KILL_CONFIG_CMD
,
1691 CMD_SYNC
, sizeof(adv_cmd
), &adv_cmd
);
1693 IWL_ERR(priv
, "REPLY_CT_KILL_CONFIG_CMD failed\n");
1695 IWL_DEBUG_INFO(priv
, "REPLY_CT_KILL_CONFIG_CMD "
1697 "critical temperature enter is %d,"
1699 priv
->hw_params
.ct_kill_threshold
,
1700 priv
->hw_params
.ct_kill_exit_threshold
);
1702 cmd
.critical_temperature_R
=
1703 cpu_to_le32(priv
->hw_params
.ct_kill_threshold
);
1705 ret
= trans_send_cmd_pdu(&priv
->trans
,
1706 REPLY_CT_KILL_CONFIG_CMD
,
1707 CMD_SYNC
, sizeof(cmd
), &cmd
);
1709 IWL_ERR(priv
, "REPLY_CT_KILL_CONFIG_CMD failed\n");
1711 IWL_DEBUG_INFO(priv
, "REPLY_CT_KILL_CONFIG_CMD "
1713 "critical temperature is %d\n",
1714 priv
->hw_params
.ct_kill_threshold
);
1718 static int iwlagn_send_calib_cfg_rt(struct iwl_priv
*priv
, u32 cfg
)
1720 struct iwl_calib_cfg_cmd calib_cfg_cmd
;
1721 struct iwl_host_cmd cmd
= {
1722 .id
= CALIBRATION_CFG_CMD
,
1723 .len
= { sizeof(struct iwl_calib_cfg_cmd
), },
1724 .data
= { &calib_cfg_cmd
, },
1727 memset(&calib_cfg_cmd
, 0, sizeof(calib_cfg_cmd
));
1728 calib_cfg_cmd
.ucd_calib_cfg
.once
.is_enable
= IWL_CALIB_INIT_CFG_ALL
;
1729 calib_cfg_cmd
.ucd_calib_cfg
.once
.start
= cpu_to_le32(cfg
);
1731 return trans_send_cmd(&priv
->trans
, &cmd
);
1735 static int iwlagn_send_tx_ant_config(struct iwl_priv
*priv
, u8 valid_tx_ant
)
1737 struct iwl_tx_ant_config_cmd tx_ant_cmd
= {
1738 .valid
= cpu_to_le32(valid_tx_ant
),
1741 if (IWL_UCODE_API(priv
->ucode_ver
) > 1) {
1742 IWL_DEBUG_HC(priv
, "select valid tx ant: %u\n", valid_tx_ant
);
1743 return trans_send_cmd_pdu(&priv
->trans
,
1744 TX_ANT_CONFIGURATION_CMD
,
1746 sizeof(struct iwl_tx_ant_config_cmd
),
1749 IWL_DEBUG_HC(priv
, "TX_ANT_CONFIGURATION_CMD not supported\n");
1755 * iwl_alive_start - called after REPLY_ALIVE notification received
1756 * from protocol/runtime uCode (initialization uCode's
1757 * Alive gets handled by iwl_init_alive_start()).
1759 int iwl_alive_start(struct iwl_priv
*priv
)
1762 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
1764 /*TODO: this should go to the transport layer */
1765 iwl_reset_ict(priv
);
1767 IWL_DEBUG_INFO(priv
, "Runtime Alive received.\n");
1769 /* After the ALIVE response, we can send host commands to the uCode */
1770 set_bit(STATUS_ALIVE
, &priv
->status
);
1772 /* Enable watchdog to monitor the driver tx queues */
1773 iwl_setup_watchdog(priv
);
1775 if (iwl_is_rfkill(priv
))
1778 /* download priority table before any calibration request */
1779 if (priv
->cfg
->bt_params
&&
1780 priv
->cfg
->bt_params
->advanced_bt_coexist
) {
1781 /* Configure Bluetooth device coexistence support */
1782 if (priv
->cfg
->bt_params
->bt_sco_disable
)
1783 priv
->bt_enable_pspoll
= false;
1785 priv
->bt_enable_pspoll
= true;
1787 priv
->bt_valid
= IWLAGN_BT_ALL_VALID_MSK
;
1788 priv
->kill_ack_mask
= IWLAGN_BT_KILL_ACK_MASK_DEFAULT
;
1789 priv
->kill_cts_mask
= IWLAGN_BT_KILL_CTS_MASK_DEFAULT
;
1790 iwlagn_send_advance_bt_config(priv
);
1791 priv
->bt_valid
= IWLAGN_BT_VALID_ENABLE_FLAGS
;
1792 priv
->cur_rssi_ctx
= NULL
;
1794 iwlagn_send_prio_tbl(priv
);
1796 /* FIXME: w/a to force change uCode BT state machine */
1797 ret
= iwlagn_send_bt_env(priv
, IWL_BT_COEX_ENV_OPEN
,
1798 BT_COEX_PRIO_TBL_EVT_INIT_CALIB2
);
1801 ret
= iwlagn_send_bt_env(priv
, IWL_BT_COEX_ENV_CLOSE
,
1802 BT_COEX_PRIO_TBL_EVT_INIT_CALIB2
);
1807 * default is 2-wire BT coexexistence support
1809 iwl_send_bt_config(priv
);
1812 if (priv
->hw_params
.calib_rt_cfg
)
1813 iwlagn_send_calib_cfg_rt(priv
, priv
->hw_params
.calib_rt_cfg
);
1815 ieee80211_wake_queues(priv
->hw
);
1817 priv
->active_rate
= IWL_RATES_MASK
;
1819 /* Configure Tx antenna selection based on H/W config */
1820 iwlagn_send_tx_ant_config(priv
, priv
->cfg
->valid_tx_ant
);
1822 if (iwl_is_associated_ctx(ctx
) && !priv
->wowlan
) {
1823 struct iwl_rxon_cmd
*active_rxon
=
1824 (struct iwl_rxon_cmd
*)&ctx
->active
;
1825 /* apply any changes in staging */
1826 ctx
->staging
.filter_flags
|= RXON_FILTER_ASSOC_MSK
;
1827 active_rxon
->filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
1829 struct iwl_rxon_context
*tmp
;
1830 /* Initialize our rx_config data */
1831 for_each_context(priv
, tmp
)
1832 iwl_connection_init_rx_config(priv
, tmp
);
1834 iwlagn_set_rxon_chain(priv
, ctx
);
1837 if (!priv
->wowlan
) {
1838 /* WoWLAN ucode will not reply in the same way, skip it */
1839 iwl_reset_run_time_calib(priv
);
1842 set_bit(STATUS_READY
, &priv
->status
);
1844 /* Configure the adapter for unassociated operation */
1845 ret
= iwlagn_commit_rxon(priv
, ctx
);
1849 /* At this point, the NIC is initialized and operational */
1850 iwl_rf_kill_ct_config(priv
);
1852 IWL_DEBUG_INFO(priv
, "ALIVE processing complete.\n");
1854 return iwl_power_update_mode(priv
, true);
1857 static void iwl_cancel_deferred_work(struct iwl_priv
*priv
);
1859 static void __iwl_down(struct iwl_priv
*priv
)
1863 IWL_DEBUG_INFO(priv
, DRV_NAME
" is going down\n");
1865 iwl_scan_cancel_timeout(priv
, 200);
1868 * If active, scanning won't cancel it, so say it expired.
1869 * No race since we hold the mutex here and a new one
1870 * can't come in at this time.
1872 ieee80211_remain_on_channel_expired(priv
->hw
);
1874 exit_pending
= test_and_set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
1876 /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set
1877 * to prevent rearm timer */
1878 del_timer_sync(&priv
->watchdog
);
1880 iwl_clear_ucode_stations(priv
, NULL
);
1881 iwl_dealloc_bcast_stations(priv
);
1882 iwl_clear_driver_stations(priv
);
1884 /* reset BT coex data */
1885 priv
->bt_status
= 0;
1886 priv
->cur_rssi_ctx
= NULL
;
1887 priv
->bt_is_sco
= 0;
1888 if (priv
->cfg
->bt_params
)
1889 priv
->bt_traffic_load
=
1890 priv
->cfg
->bt_params
->bt_init_traffic_load
;
1892 priv
->bt_traffic_load
= 0;
1893 priv
->bt_full_concurrent
= false;
1894 priv
->bt_ci_compliance
= 0;
1896 /* Wipe out the EXIT_PENDING status bit if we are not actually
1897 * exiting the module */
1899 clear_bit(STATUS_EXIT_PENDING
, &priv
->status
);
1901 if (priv
->mac80211_registered
)
1902 ieee80211_stop_queues(priv
->hw
);
1904 /* Clear out all status bits but a few that are stable across reset */
1905 priv
->status
&= test_bit(STATUS_RF_KILL_HW
, &priv
->status
) <<
1907 test_bit(STATUS_GEO_CONFIGURED
, &priv
->status
) <<
1908 STATUS_GEO_CONFIGURED
|
1909 test_bit(STATUS_FW_ERROR
, &priv
->status
) <<
1911 test_bit(STATUS_EXIT_PENDING
, &priv
->status
) <<
1912 STATUS_EXIT_PENDING
;
1914 trans_stop_device(&priv
->trans
);
1916 dev_kfree_skb(priv
->beacon_skb
);
1917 priv
->beacon_skb
= NULL
;
1920 static void iwl_down(struct iwl_priv
*priv
)
1922 mutex_lock(&priv
->mutex
);
1924 mutex_unlock(&priv
->mutex
);
1926 iwl_cancel_deferred_work(priv
);
1929 #define MAX_HW_RESTARTS 5
1931 static int __iwl_up(struct iwl_priv
*priv
)
1933 struct iwl_rxon_context
*ctx
;
1936 lockdep_assert_held(&priv
->mutex
);
1938 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
)) {
1939 IWL_WARN(priv
, "Exit pending; will not bring the NIC up\n");
1943 for_each_context(priv
, ctx
) {
1944 ret
= iwlagn_alloc_bcast_station(priv
, ctx
);
1946 iwl_dealloc_bcast_stations(priv
);
1951 ret
= iwlagn_run_init_ucode(priv
);
1953 IWL_ERR(priv
, "Failed to run INIT ucode: %d\n", ret
);
1957 ret
= iwlagn_load_ucode_wait_alive(priv
,
1961 IWL_ERR(priv
, "Failed to start RT ucode: %d\n", ret
);
1965 ret
= iwl_alive_start(priv
);
1971 set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
1973 clear_bit(STATUS_EXIT_PENDING
, &priv
->status
);
1975 IWL_ERR(priv
, "Unable to initialize device.\n");
1980 /*****************************************************************************
1982 * Workqueue callbacks
1984 *****************************************************************************/
1986 static void iwl_bg_run_time_calib_work(struct work_struct
*work
)
1988 struct iwl_priv
*priv
= container_of(work
, struct iwl_priv
,
1989 run_time_calib_work
);
1991 mutex_lock(&priv
->mutex
);
1993 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
) ||
1994 test_bit(STATUS_SCANNING
, &priv
->status
)) {
1995 mutex_unlock(&priv
->mutex
);
1999 if (priv
->start_calib
) {
2000 iwl_chain_noise_calibration(priv
);
2001 iwl_sensitivity_calibration(priv
);
2004 mutex_unlock(&priv
->mutex
);
2007 static void iwlagn_prepare_restart(struct iwl_priv
*priv
)
2009 struct iwl_rxon_context
*ctx
;
2010 bool bt_full_concurrent
;
2011 u8 bt_ci_compliance
;
2016 lockdep_assert_held(&priv
->mutex
);
2018 for_each_context(priv
, ctx
)
2023 * __iwl_down() will clear the BT status variables,
2024 * which is correct, but when we restart we really
2025 * want to keep them so restore them afterwards.
2027 * The restart process will later pick them up and
2028 * re-configure the hw when we reconfigure the BT
2031 bt_full_concurrent
= priv
->bt_full_concurrent
;
2032 bt_ci_compliance
= priv
->bt_ci_compliance
;
2033 bt_load
= priv
->bt_traffic_load
;
2034 bt_status
= priv
->bt_status
;
2035 bt_is_sco
= priv
->bt_is_sco
;
2039 priv
->bt_full_concurrent
= bt_full_concurrent
;
2040 priv
->bt_ci_compliance
= bt_ci_compliance
;
2041 priv
->bt_traffic_load
= bt_load
;
2042 priv
->bt_status
= bt_status
;
2043 priv
->bt_is_sco
= bt_is_sco
;
2046 static void iwl_bg_restart(struct work_struct
*data
)
2048 struct iwl_priv
*priv
= container_of(data
, struct iwl_priv
, restart
);
2050 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2053 if (test_and_clear_bit(STATUS_FW_ERROR
, &priv
->status
)) {
2054 mutex_lock(&priv
->mutex
);
2055 iwlagn_prepare_restart(priv
);
2056 mutex_unlock(&priv
->mutex
);
2057 iwl_cancel_deferred_work(priv
);
2058 ieee80211_restart_hw(priv
->hw
);
2064 /*****************************************************************************
2066 * mac80211 entry point functions
2068 *****************************************************************************/
2070 static const struct ieee80211_iface_limit iwlagn_sta_ap_limits
[] = {
2073 .types
= BIT(NL80211_IFTYPE_STATION
),
2077 .types
= BIT(NL80211_IFTYPE_AP
),
2081 static const struct ieee80211_iface_limit iwlagn_2sta_limits
[] = {
2084 .types
= BIT(NL80211_IFTYPE_STATION
),
2088 static const struct ieee80211_iface_limit iwlagn_p2p_sta_go_limits
[] = {
2091 .types
= BIT(NL80211_IFTYPE_STATION
),
2095 .types
= BIT(NL80211_IFTYPE_P2P_GO
) |
2096 BIT(NL80211_IFTYPE_AP
),
2100 static const struct ieee80211_iface_limit iwlagn_p2p_2sta_limits
[] = {
2103 .types
= BIT(NL80211_IFTYPE_STATION
),
2107 .types
= BIT(NL80211_IFTYPE_P2P_CLIENT
),
2111 static const struct ieee80211_iface_combination
2112 iwlagn_iface_combinations_dualmode
[] = {
2113 { .num_different_channels
= 1,
2114 .max_interfaces
= 2,
2115 .beacon_int_infra_match
= true,
2116 .limits
= iwlagn_sta_ap_limits
,
2117 .n_limits
= ARRAY_SIZE(iwlagn_sta_ap_limits
),
2119 { .num_different_channels
= 1,
2120 .max_interfaces
= 2,
2121 .limits
= iwlagn_2sta_limits
,
2122 .n_limits
= ARRAY_SIZE(iwlagn_2sta_limits
),
2126 static const struct ieee80211_iface_combination
2127 iwlagn_iface_combinations_p2p
[] = {
2128 { .num_different_channels
= 1,
2129 .max_interfaces
= 2,
2130 .beacon_int_infra_match
= true,
2131 .limits
= iwlagn_p2p_sta_go_limits
,
2132 .n_limits
= ARRAY_SIZE(iwlagn_p2p_sta_go_limits
),
2134 { .num_different_channels
= 1,
2135 .max_interfaces
= 2,
2136 .limits
= iwlagn_p2p_2sta_limits
,
2137 .n_limits
= ARRAY_SIZE(iwlagn_p2p_2sta_limits
),
2142 * Not a mac80211 entry point function, but it fits in with all the
2143 * other mac80211 functions grouped here.
2145 static int iwl_mac_setup_register(struct iwl_priv
*priv
,
2146 struct iwlagn_ucode_capabilities
*capa
)
2149 struct ieee80211_hw
*hw
= priv
->hw
;
2150 struct iwl_rxon_context
*ctx
;
2152 hw
->rate_control_algorithm
= "iwl-agn-rs";
2154 /* Tell mac80211 our characteristics */
2155 hw
->flags
= IEEE80211_HW_SIGNAL_DBM
|
2156 IEEE80211_HW_AMPDU_AGGREGATION
|
2157 IEEE80211_HW_NEED_DTIM_PERIOD
|
2158 IEEE80211_HW_SPECTRUM_MGMT
|
2159 IEEE80211_HW_REPORTS_TX_ACK_STATUS
;
2161 hw
->max_tx_aggregation_subframes
= LINK_QUAL_AGG_FRAME_LIMIT_DEF
;
2163 hw
->flags
|= IEEE80211_HW_SUPPORTS_PS
|
2164 IEEE80211_HW_SUPPORTS_DYNAMIC_PS
;
2166 if (priv
->cfg
->sku
& EEPROM_SKU_CAP_11N_ENABLE
)
2167 hw
->flags
|= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS
|
2168 IEEE80211_HW_SUPPORTS_STATIC_SMPS
;
2170 if (capa
->flags
& IWL_UCODE_TLV_FLAGS_MFP
)
2171 hw
->flags
|= IEEE80211_HW_MFP_CAPABLE
;
2173 hw
->sta_data_size
= sizeof(struct iwl_station_priv
);
2174 hw
->vif_data_size
= sizeof(struct iwl_vif_priv
);
2176 for_each_context(priv
, ctx
) {
2177 hw
->wiphy
->interface_modes
|= ctx
->interface_modes
;
2178 hw
->wiphy
->interface_modes
|= ctx
->exclusive_interface_modes
;
2181 BUILD_BUG_ON(NUM_IWL_RXON_CTX
!= 2);
2183 if (hw
->wiphy
->interface_modes
& BIT(NL80211_IFTYPE_P2P_CLIENT
)) {
2184 hw
->wiphy
->iface_combinations
= iwlagn_iface_combinations_p2p
;
2185 hw
->wiphy
->n_iface_combinations
=
2186 ARRAY_SIZE(iwlagn_iface_combinations_p2p
);
2187 } else if (hw
->wiphy
->interface_modes
& BIT(NL80211_IFTYPE_AP
)) {
2188 hw
->wiphy
->iface_combinations
= iwlagn_iface_combinations_dualmode
;
2189 hw
->wiphy
->n_iface_combinations
=
2190 ARRAY_SIZE(iwlagn_iface_combinations_dualmode
);
2193 hw
->wiphy
->max_remain_on_channel_duration
= 1000;
2195 hw
->wiphy
->flags
|= WIPHY_FLAG_CUSTOM_REGULATORY
|
2196 WIPHY_FLAG_DISABLE_BEACON_HINTS
|
2197 WIPHY_FLAG_IBSS_RSN
;
2199 if (priv
->ucode_wowlan
.code
.len
&& device_can_wakeup(priv
->bus
->dev
)) {
2200 hw
->wiphy
->wowlan
.flags
= WIPHY_WOWLAN_MAGIC_PKT
|
2201 WIPHY_WOWLAN_DISCONNECT
|
2202 WIPHY_WOWLAN_EAP_IDENTITY_REQ
|
2203 WIPHY_WOWLAN_RFKILL_RELEASE
;
2204 if (!iwlagn_mod_params
.sw_crypto
)
2205 hw
->wiphy
->wowlan
.flags
|=
2206 WIPHY_WOWLAN_SUPPORTS_GTK_REKEY
|
2207 WIPHY_WOWLAN_GTK_REKEY_FAILURE
;
2209 hw
->wiphy
->wowlan
.n_patterns
= IWLAGN_WOWLAN_MAX_PATTERNS
;
2210 hw
->wiphy
->wowlan
.pattern_min_len
=
2211 IWLAGN_WOWLAN_MIN_PATTERN_LEN
;
2212 hw
->wiphy
->wowlan
.pattern_max_len
=
2213 IWLAGN_WOWLAN_MAX_PATTERN_LEN
;
2216 if (iwlagn_mod_params
.power_save
)
2217 hw
->wiphy
->flags
|= WIPHY_FLAG_PS_ON_BY_DEFAULT
;
2219 hw
->wiphy
->flags
&= ~WIPHY_FLAG_PS_ON_BY_DEFAULT
;
2221 hw
->wiphy
->max_scan_ssids
= PROBE_OPTION_MAX
;
2222 /* we create the 802.11 header and a zero-length SSID element */
2223 hw
->wiphy
->max_scan_ie_len
= capa
->max_probe_length
- 24 - 2;
2225 /* Default value; 4 EDCA QOS priorities */
2228 hw
->max_listen_interval
= IWL_CONN_MAX_LISTEN_INTERVAL
;
2230 if (priv
->bands
[IEEE80211_BAND_2GHZ
].n_channels
)
2231 priv
->hw
->wiphy
->bands
[IEEE80211_BAND_2GHZ
] =
2232 &priv
->bands
[IEEE80211_BAND_2GHZ
];
2233 if (priv
->bands
[IEEE80211_BAND_5GHZ
].n_channels
)
2234 priv
->hw
->wiphy
->bands
[IEEE80211_BAND_5GHZ
] =
2235 &priv
->bands
[IEEE80211_BAND_5GHZ
];
2237 iwl_leds_init(priv
);
2239 ret
= ieee80211_register_hw(priv
->hw
);
2241 IWL_ERR(priv
, "Failed to register hw (error %d)\n", ret
);
2244 priv
->mac80211_registered
= 1;
2250 static int iwlagn_mac_start(struct ieee80211_hw
*hw
)
2252 struct iwl_priv
*priv
= hw
->priv
;
2255 IWL_DEBUG_MAC80211(priv
, "enter\n");
2257 /* we should be verifying the device is ready to be opened */
2258 mutex_lock(&priv
->mutex
);
2259 ret
= __iwl_up(priv
);
2260 mutex_unlock(&priv
->mutex
);
2264 IWL_DEBUG_INFO(priv
, "Start UP work done.\n");
2266 /* Now we should be done, and the READY bit should be set. */
2267 if (WARN_ON(!test_bit(STATUS_READY
, &priv
->status
)))
2270 iwlagn_led_enable(priv
);
2273 IWL_DEBUG_MAC80211(priv
, "leave\n");
2277 static void iwlagn_mac_stop(struct ieee80211_hw
*hw
)
2279 struct iwl_priv
*priv
= hw
->priv
;
2281 IWL_DEBUG_MAC80211(priv
, "enter\n");
2290 flush_workqueue(priv
->workqueue
);
2292 /* User space software may expect getting rfkill changes
2293 * even if interface is down */
2294 iwl_write32(priv
, CSR_INT
, 0xFFFFFFFF);
2295 iwl_enable_rfkill_int(priv
);
2297 IWL_DEBUG_MAC80211(priv
, "leave\n");
2301 static int iwlagn_send_patterns(struct iwl_priv
*priv
,
2302 struct cfg80211_wowlan
*wowlan
)
2304 struct iwlagn_wowlan_patterns_cmd
*pattern_cmd
;
2305 struct iwl_host_cmd cmd
= {
2306 .id
= REPLY_WOWLAN_PATTERNS
,
2307 .dataflags
[0] = IWL_HCMD_DFL_NOCOPY
,
2312 if (!wowlan
->n_patterns
)
2315 cmd
.len
[0] = sizeof(*pattern_cmd
) +
2316 wowlan
->n_patterns
* sizeof(struct iwlagn_wowlan_pattern
);
2318 pattern_cmd
= kmalloc(cmd
.len
[0], GFP_KERNEL
);
2322 pattern_cmd
->n_patterns
= cpu_to_le32(wowlan
->n_patterns
);
2324 for (i
= 0; i
< wowlan
->n_patterns
; i
++) {
2325 int mask_len
= DIV_ROUND_UP(wowlan
->patterns
[i
].pattern_len
, 8);
2327 memcpy(&pattern_cmd
->patterns
[i
].mask
,
2328 wowlan
->patterns
[i
].mask
, mask_len
);
2329 memcpy(&pattern_cmd
->patterns
[i
].pattern
,
2330 wowlan
->patterns
[i
].pattern
,
2331 wowlan
->patterns
[i
].pattern_len
);
2332 pattern_cmd
->patterns
[i
].mask_size
= mask_len
;
2333 pattern_cmd
->patterns
[i
].pattern_size
=
2334 wowlan
->patterns
[i
].pattern_len
;
2337 cmd
.data
[0] = pattern_cmd
;
2338 err
= trans_send_cmd(&priv
->trans
, &cmd
);
2344 static void iwlagn_mac_set_rekey_data(struct ieee80211_hw
*hw
,
2345 struct ieee80211_vif
*vif
,
2346 struct cfg80211_gtk_rekey_data
*data
)
2348 struct iwl_priv
*priv
= hw
->priv
;
2350 if (iwlagn_mod_params
.sw_crypto
)
2353 mutex_lock(&priv
->mutex
);
2355 if (priv
->contexts
[IWL_RXON_CTX_BSS
].vif
!= vif
)
2358 memcpy(priv
->kek
, data
->kek
, NL80211_KEK_LEN
);
2359 memcpy(priv
->kck
, data
->kck
, NL80211_KCK_LEN
);
2360 priv
->replay_ctr
= cpu_to_le64(be64_to_cpup((__be64
*)&data
->replay_ctr
));
2361 priv
->have_rekey_data
= true;
2364 mutex_unlock(&priv
->mutex
);
2367 struct wowlan_key_data
{
2368 struct iwl_rxon_context
*ctx
;
2369 struct iwlagn_wowlan_rsc_tsc_params_cmd
*rsc_tsc
;
2370 struct iwlagn_wowlan_tkip_params_cmd
*tkip
;
2372 bool error
, use_rsc_tsc
, use_tkip
;
2376 static void iwlagn_convert_p1k(u16
*p1k
, __le16
*out
)
2380 for (i
= 0; i
< IWLAGN_P1K_SIZE
; i
++)
2381 out
[i
] = cpu_to_le16(p1k
[i
]);
2384 static void iwlagn_wowlan_program_keys(struct ieee80211_hw
*hw
,
2385 struct ieee80211_vif
*vif
,
2386 struct ieee80211_sta
*sta
,
2387 struct ieee80211_key_conf
*key
,
2390 struct iwl_priv
*priv
= hw
->priv
;
2391 struct wowlan_key_data
*data
= _data
;
2392 struct iwl_rxon_context
*ctx
= data
->ctx
;
2393 struct aes_sc
*aes_sc
, *aes_tx_sc
= NULL
;
2394 struct tkip_sc
*tkip_sc
, *tkip_tx_sc
= NULL
;
2395 struct iwlagn_p1k_cache
*rx_p1ks
;
2397 struct ieee80211_key_seq seq
;
2398 u32 cur_rx_iv32
= 0;
2399 u16 p1k
[IWLAGN_P1K_SIZE
];
2402 mutex_lock(&priv
->mutex
);
2404 if ((key
->cipher
== WLAN_CIPHER_SUITE_WEP40
||
2405 key
->cipher
== WLAN_CIPHER_SUITE_WEP104
) &&
2406 !sta
&& !ctx
->key_mapping_keys
)
2407 ret
= iwl_set_default_wep_key(priv
, ctx
, key
);
2409 ret
= iwl_set_dynamic_key(priv
, ctx
, key
, sta
);
2412 IWL_ERR(priv
, "Error setting key during suspend!\n");
2416 switch (key
->cipher
) {
2417 case WLAN_CIPHER_SUITE_TKIP
:
2419 tkip_sc
= data
->rsc_tsc
->all_tsc_rsc
.tkip
.unicast_rsc
;
2420 tkip_tx_sc
= &data
->rsc_tsc
->all_tsc_rsc
.tkip
.tsc
;
2422 rx_p1ks
= data
->tkip
->rx_uni
;
2424 ieee80211_get_key_tx_seq(key
, &seq
);
2425 tkip_tx_sc
->iv16
= cpu_to_le16(seq
.tkip
.iv16
);
2426 tkip_tx_sc
->iv32
= cpu_to_le32(seq
.tkip
.iv32
);
2428 ieee80211_get_tkip_p1k_iv(key
, seq
.tkip
.iv32
, p1k
);
2429 iwlagn_convert_p1k(p1k
, data
->tkip
->tx
.p1k
);
2431 memcpy(data
->tkip
->mic_keys
.tx
,
2432 &key
->key
[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY
],
2433 IWLAGN_MIC_KEY_SIZE
);
2435 rx_mic_key
= data
->tkip
->mic_keys
.rx_unicast
;
2437 tkip_sc
= data
->rsc_tsc
->all_tsc_rsc
.tkip
.multicast_rsc
;
2438 rx_p1ks
= data
->tkip
->rx_multi
;
2439 rx_mic_key
= data
->tkip
->mic_keys
.rx_mcast
;
2443 * For non-QoS this relies on the fact that both the uCode and
2444 * mac80211 use TID 0 (as they need to to avoid replay attacks)
2445 * for checking the IV in the frames.
2447 for (i
= 0; i
< IWLAGN_NUM_RSC
; i
++) {
2448 ieee80211_get_key_rx_seq(key
, i
, &seq
);
2449 tkip_sc
[i
].iv16
= cpu_to_le16(seq
.tkip
.iv16
);
2450 tkip_sc
[i
].iv32
= cpu_to_le32(seq
.tkip
.iv32
);
2451 /* wrapping isn't allowed, AP must rekey */
2452 if (seq
.tkip
.iv32
> cur_rx_iv32
)
2453 cur_rx_iv32
= seq
.tkip
.iv32
;
2456 ieee80211_get_tkip_rx_p1k(key
, data
->bssid
, cur_rx_iv32
, p1k
);
2457 iwlagn_convert_p1k(p1k
, rx_p1ks
[0].p1k
);
2458 ieee80211_get_tkip_rx_p1k(key
, data
->bssid
,
2459 cur_rx_iv32
+ 1, p1k
);
2460 iwlagn_convert_p1k(p1k
, rx_p1ks
[1].p1k
);
2463 &key
->key
[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY
],
2464 IWLAGN_MIC_KEY_SIZE
);
2466 data
->use_tkip
= true;
2467 data
->use_rsc_tsc
= true;
2469 case WLAN_CIPHER_SUITE_CCMP
:
2471 u8
*pn
= seq
.ccmp
.pn
;
2473 aes_sc
= data
->rsc_tsc
->all_tsc_rsc
.aes
.unicast_rsc
;
2474 aes_tx_sc
= &data
->rsc_tsc
->all_tsc_rsc
.aes
.tsc
;
2476 ieee80211_get_key_tx_seq(key
, &seq
);
2477 aes_tx_sc
->pn
= cpu_to_le64(
2480 ((u64
)pn
[3] << 16) |
2481 ((u64
)pn
[2] << 24) |
2482 ((u64
)pn
[1] << 32) |
2483 ((u64
)pn
[0] << 40));
2485 aes_sc
= data
->rsc_tsc
->all_tsc_rsc
.aes
.multicast_rsc
;
2488 * For non-QoS this relies on the fact that both the uCode and
2489 * mac80211 use TID 0 for checking the IV in the frames.
2491 for (i
= 0; i
< IWLAGN_NUM_RSC
; i
++) {
2492 u8
*pn
= seq
.ccmp
.pn
;
2494 ieee80211_get_key_rx_seq(key
, i
, &seq
);
2495 aes_sc
->pn
= cpu_to_le64(
2498 ((u64
)pn
[3] << 16) |
2499 ((u64
)pn
[2] << 24) |
2500 ((u64
)pn
[1] << 32) |
2501 ((u64
)pn
[0] << 40));
2503 data
->use_rsc_tsc
= true;
2507 mutex_unlock(&priv
->mutex
);
2510 static int iwlagn_mac_suspend(struct ieee80211_hw
*hw
,
2511 struct cfg80211_wowlan
*wowlan
)
2513 struct iwl_priv
*priv
= hw
->priv
;
2514 struct iwlagn_wowlan_wakeup_filter_cmd wakeup_filter_cmd
;
2515 struct iwl_rxon_cmd rxon
;
2516 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
2517 struct iwlagn_wowlan_kek_kck_material_cmd kek_kck_cmd
;
2518 struct iwlagn_wowlan_tkip_params_cmd tkip_cmd
= {};
2519 struct wowlan_key_data key_data
= {
2521 .bssid
= ctx
->active
.bssid_addr
,
2522 .use_rsc_tsc
= false,
2529 if (WARN_ON(!wowlan
))
2532 mutex_lock(&priv
->mutex
);
2534 /* Don't attempt WoWLAN when not associated, tear down instead. */
2535 if (!ctx
->vif
|| ctx
->vif
->type
!= NL80211_IFTYPE_STATION
||
2536 !iwl_is_associated_ctx(ctx
)) {
2541 key_data
.rsc_tsc
= kzalloc(sizeof(*key_data
.rsc_tsc
), GFP_KERNEL
);
2542 if (!key_data
.rsc_tsc
) {
2547 memset(&wakeup_filter_cmd
, 0, sizeof(wakeup_filter_cmd
));
2550 * We know the last used seqno, and the uCode expects to know that
2551 * one, it will increment before TX.
2553 seq
= le16_to_cpu(priv
->last_seq_ctl
) & IEEE80211_SCTL_SEQ
;
2554 wakeup_filter_cmd
.non_qos_seq
= cpu_to_le16(seq
);
2557 * For QoS counters, we store the one to use next, so subtract 0x10
2558 * since the uCode will add 0x10 before using the value.
2560 for (i
= 0; i
< 8; i
++) {
2561 seq
= priv
->stations
[IWL_AP_ID
].tid
[i
].seq_number
;
2563 wakeup_filter_cmd
.qos_seq
[i
] = cpu_to_le16(seq
);
2566 if (wowlan
->disconnect
)
2567 wakeup_filter_cmd
.enabled
|=
2568 cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_BEACON_MISS
|
2569 IWLAGN_WOWLAN_WAKEUP_LINK_CHANGE
);
2570 if (wowlan
->magic_pkt
)
2571 wakeup_filter_cmd
.enabled
|=
2572 cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_MAGIC_PACKET
);
2573 if (wowlan
->gtk_rekey_failure
)
2574 wakeup_filter_cmd
.enabled
|=
2575 cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_GTK_REKEY_FAIL
);
2576 if (wowlan
->eap_identity_req
)
2577 wakeup_filter_cmd
.enabled
|=
2578 cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_EAP_IDENT_REQ
);
2579 if (wowlan
->four_way_handshake
)
2580 wakeup_filter_cmd
.enabled
|=
2581 cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_4WAY_HANDSHAKE
);
2582 if (wowlan
->rfkill_release
)
2583 wakeup_filter_cmd
.enabled
|=
2584 cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_RFKILL
);
2585 if (wowlan
->n_patterns
)
2586 wakeup_filter_cmd
.enabled
|=
2587 cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_PATTERN_MATCH
);
2589 iwl_scan_cancel_timeout(priv
, 200);
2591 memcpy(&rxon
, &ctx
->active
, sizeof(rxon
));
2593 trans_stop_device(&priv
->trans
);
2595 priv
->wowlan
= true;
2597 ret
= iwlagn_load_ucode_wait_alive(priv
, &priv
->ucode_wowlan
,
2602 /* now configure WoWLAN ucode */
2603 ret
= iwl_alive_start(priv
);
2607 memcpy(&ctx
->staging
, &rxon
, sizeof(rxon
));
2608 ret
= iwlagn_commit_rxon(priv
, ctx
);
2612 ret
= iwl_power_update_mode(priv
, true);
2616 if (!iwlagn_mod_params
.sw_crypto
) {
2617 /* mark all keys clear */
2618 priv
->ucode_key_table
= 0;
2619 ctx
->key_mapping_keys
= 0;
2622 * This needs to be unlocked due to lock ordering
2623 * constraints. Since we're in the suspend path
2624 * that isn't really a problem though.
2626 mutex_unlock(&priv
->mutex
);
2627 ieee80211_iter_keys(priv
->hw
, ctx
->vif
,
2628 iwlagn_wowlan_program_keys
,
2630 mutex_lock(&priv
->mutex
);
2631 if (key_data
.error
) {
2636 if (key_data
.use_rsc_tsc
) {
2637 struct iwl_host_cmd rsc_tsc_cmd
= {
2638 .id
= REPLY_WOWLAN_TSC_RSC_PARAMS
,
2640 .data
[0] = key_data
.rsc_tsc
,
2641 .dataflags
[0] = IWL_HCMD_DFL_NOCOPY
,
2642 .len
[0] = sizeof(*key_data
.rsc_tsc
),
2645 ret
= trans_send_cmd(&priv
->trans
, &rsc_tsc_cmd
);
2650 if (key_data
.use_tkip
) {
2651 ret
= trans_send_cmd_pdu(&priv
->trans
,
2652 REPLY_WOWLAN_TKIP_PARAMS
,
2653 CMD_SYNC
, sizeof(tkip_cmd
),
2659 if (priv
->have_rekey_data
) {
2660 memset(&kek_kck_cmd
, 0, sizeof(kek_kck_cmd
));
2661 memcpy(kek_kck_cmd
.kck
, priv
->kck
, NL80211_KCK_LEN
);
2662 kek_kck_cmd
.kck_len
= cpu_to_le16(NL80211_KCK_LEN
);
2663 memcpy(kek_kck_cmd
.kek
, priv
->kek
, NL80211_KEK_LEN
);
2664 kek_kck_cmd
.kek_len
= cpu_to_le16(NL80211_KEK_LEN
);
2665 kek_kck_cmd
.replay_ctr
= priv
->replay_ctr
;
2667 ret
= trans_send_cmd_pdu(&priv
->trans
,
2668 REPLY_WOWLAN_KEK_KCK_MATERIAL
,
2669 CMD_SYNC
, sizeof(kek_kck_cmd
),
2676 ret
= trans_send_cmd_pdu(&priv
->trans
, REPLY_WOWLAN_WAKEUP_FILTER
,
2677 CMD_SYNC
, sizeof(wakeup_filter_cmd
),
2678 &wakeup_filter_cmd
);
2682 ret
= iwlagn_send_patterns(priv
, wowlan
);
2686 device_set_wakeup_enable(priv
->bus
->dev
, true);
2688 /* Now let the ucode operate on its own */
2689 iwl_write32(priv
, CSR_UCODE_DRV_GP1_SET
,
2690 CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE
);
2695 priv
->wowlan
= false;
2696 iwlagn_prepare_restart(priv
);
2697 ieee80211_restart_hw(priv
->hw
);
2699 mutex_unlock(&priv
->mutex
);
2700 kfree(key_data
.rsc_tsc
);
2704 static int iwlagn_mac_resume(struct ieee80211_hw
*hw
)
2706 struct iwl_priv
*priv
= hw
->priv
;
2707 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
2708 struct ieee80211_vif
*vif
;
2709 unsigned long flags
;
2710 u32 base
, status
= 0xffffffff;
2713 mutex_lock(&priv
->mutex
);
2715 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
,
2716 CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE
);
2718 base
= priv
->device_pointers
.error_event_table
;
2719 if (iwlagn_hw_valid_rtc_data_addr(base
)) {
2720 spin_lock_irqsave(&priv
->reg_lock
, flags
);
2721 ret
= iwl_grab_nic_access_silent(priv
);
2723 iwl_write32(priv
, HBUS_TARG_MEM_RADDR
, base
);
2724 status
= iwl_read32(priv
, HBUS_TARG_MEM_RDAT
);
2725 iwl_release_nic_access(priv
);
2727 spin_unlock_irqrestore(&priv
->reg_lock
, flags
);
2729 #ifdef CONFIG_IWLWIFI_DEBUGFS
2731 if (!priv
->wowlan_sram
)
2733 kzalloc(priv
->ucode_wowlan
.data
.len
,
2736 if (priv
->wowlan_sram
)
2737 _iwl_read_targ_mem_words(
2738 priv
, 0x800000, priv
->wowlan_sram
,
2739 priv
->ucode_wowlan
.data
.len
/ 4);
2744 /* we'll clear ctx->vif during iwlagn_prepare_restart() */
2747 priv
->wowlan
= false;
2749 device_set_wakeup_enable(priv
->bus
->dev
, false);
2751 iwlagn_prepare_restart(priv
);
2753 memset((void *)&ctx
->active
, 0, sizeof(ctx
->active
));
2754 iwl_connection_init_rx_config(priv
, ctx
);
2755 iwlagn_set_rxon_chain(priv
, ctx
);
2757 mutex_unlock(&priv
->mutex
);
2759 ieee80211_resume_disconnect(vif
);
2765 static void iwlagn_mac_tx(struct ieee80211_hw
*hw
, struct sk_buff
*skb
)
2767 struct iwl_priv
*priv
= hw
->priv
;
2769 IWL_DEBUG_MACDUMP(priv
, "enter\n");
2771 IWL_DEBUG_TX(priv
, "dev->xmit(%d bytes) at rate 0x%02x\n", skb
->len
,
2772 ieee80211_get_tx_rate(hw
, IEEE80211_SKB_CB(skb
))->bitrate
);
2774 if (iwlagn_tx_skb(priv
, skb
))
2775 dev_kfree_skb_any(skb
);
2777 IWL_DEBUG_MACDUMP(priv
, "leave\n");
2780 static void iwlagn_mac_update_tkip_key(struct ieee80211_hw
*hw
,
2781 struct ieee80211_vif
*vif
,
2782 struct ieee80211_key_conf
*keyconf
,
2783 struct ieee80211_sta
*sta
,
2784 u32 iv32
, u16
*phase1key
)
2786 struct iwl_priv
*priv
= hw
->priv
;
2788 iwl_update_tkip_key(priv
, vif
, keyconf
, sta
, iv32
, phase1key
);
2791 static int iwlagn_mac_set_key(struct ieee80211_hw
*hw
, enum set_key_cmd cmd
,
2792 struct ieee80211_vif
*vif
,
2793 struct ieee80211_sta
*sta
,
2794 struct ieee80211_key_conf
*key
)
2796 struct iwl_priv
*priv
= hw
->priv
;
2797 struct iwl_vif_priv
*vif_priv
= (void *)vif
->drv_priv
;
2798 struct iwl_rxon_context
*ctx
= vif_priv
->ctx
;
2800 bool is_default_wep_key
= false;
2802 IWL_DEBUG_MAC80211(priv
, "enter\n");
2804 if (iwlagn_mod_params
.sw_crypto
) {
2805 IWL_DEBUG_MAC80211(priv
, "leave - hwcrypto disabled\n");
2810 * We could program these keys into the hardware as well, but we
2811 * don't expect much multicast traffic in IBSS and having keys
2812 * for more stations is probably more useful.
2814 * Mark key TX-only and return 0.
2816 if (vif
->type
== NL80211_IFTYPE_ADHOC
&&
2817 !(key
->flags
& IEEE80211_KEY_FLAG_PAIRWISE
)) {
2818 key
->hw_key_idx
= WEP_INVALID_OFFSET
;
2822 /* If they key was TX-only, accept deletion */
2823 if (cmd
== DISABLE_KEY
&& key
->hw_key_idx
== WEP_INVALID_OFFSET
)
2826 mutex_lock(&priv
->mutex
);
2827 iwl_scan_cancel_timeout(priv
, 100);
2829 BUILD_BUG_ON(WEP_INVALID_OFFSET
== IWLAGN_HW_KEY_DEFAULT
);
2832 * If we are getting WEP group key and we didn't receive any key mapping
2833 * so far, we are in legacy wep mode (group key only), otherwise we are
2835 * In legacy wep mode, we use another host command to the uCode.
2837 if ((key
->cipher
== WLAN_CIPHER_SUITE_WEP40
||
2838 key
->cipher
== WLAN_CIPHER_SUITE_WEP104
) && !sta
) {
2840 is_default_wep_key
= !ctx
->key_mapping_keys
;
2842 is_default_wep_key
=
2843 key
->hw_key_idx
== IWLAGN_HW_KEY_DEFAULT
;
2849 if (is_default_wep_key
) {
2850 ret
= iwl_set_default_wep_key(priv
, vif_priv
->ctx
, key
);
2853 ret
= iwl_set_dynamic_key(priv
, vif_priv
->ctx
, key
, sta
);
2856 * can't add key for RX, but we don't need it
2857 * in the device for TX so still return 0
2860 key
->hw_key_idx
= WEP_INVALID_OFFSET
;
2863 IWL_DEBUG_MAC80211(priv
, "enable hwcrypto key\n");
2866 if (is_default_wep_key
)
2867 ret
= iwl_remove_default_wep_key(priv
, ctx
, key
);
2869 ret
= iwl_remove_dynamic_key(priv
, ctx
, key
, sta
);
2871 IWL_DEBUG_MAC80211(priv
, "disable hwcrypto key\n");
2877 mutex_unlock(&priv
->mutex
);
2878 IWL_DEBUG_MAC80211(priv
, "leave\n");
2883 static int iwlagn_mac_ampdu_action(struct ieee80211_hw
*hw
,
2884 struct ieee80211_vif
*vif
,
2885 enum ieee80211_ampdu_mlme_action action
,
2886 struct ieee80211_sta
*sta
, u16 tid
, u16
*ssn
,
2889 struct iwl_priv
*priv
= hw
->priv
;
2891 struct iwl_station_priv
*sta_priv
= (void *) sta
->drv_priv
;
2893 IWL_DEBUG_HT(priv
, "A-MPDU action on addr %pM tid %d\n",
2896 if (!(priv
->cfg
->sku
& EEPROM_SKU_CAP_11N_ENABLE
))
2899 mutex_lock(&priv
->mutex
);
2902 case IEEE80211_AMPDU_RX_START
:
2903 IWL_DEBUG_HT(priv
, "start Rx\n");
2904 ret
= iwl_sta_rx_agg_start(priv
, sta
, tid
, *ssn
);
2906 case IEEE80211_AMPDU_RX_STOP
:
2907 IWL_DEBUG_HT(priv
, "stop Rx\n");
2908 ret
= iwl_sta_rx_agg_stop(priv
, sta
, tid
);
2909 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2912 case IEEE80211_AMPDU_TX_START
:
2913 IWL_DEBUG_HT(priv
, "start Tx\n");
2914 ret
= iwlagn_tx_agg_start(priv
, vif
, sta
, tid
, ssn
);
2916 priv
->agg_tids_count
++;
2917 IWL_DEBUG_HT(priv
, "priv->agg_tids_count = %u\n",
2918 priv
->agg_tids_count
);
2921 case IEEE80211_AMPDU_TX_STOP
:
2922 IWL_DEBUG_HT(priv
, "stop Tx\n");
2923 ret
= iwlagn_tx_agg_stop(priv
, vif
, sta
, tid
);
2924 if ((ret
== 0) && (priv
->agg_tids_count
> 0)) {
2925 priv
->agg_tids_count
--;
2926 IWL_DEBUG_HT(priv
, "priv->agg_tids_count = %u\n",
2927 priv
->agg_tids_count
);
2929 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2931 if (priv
->cfg
->ht_params
&&
2932 priv
->cfg
->ht_params
->use_rts_for_aggregation
) {
2934 * switch off RTS/CTS if it was previously enabled
2936 sta_priv
->lq_sta
.lq
.general_params
.flags
&=
2937 ~LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK
;
2938 iwl_send_lq_cmd(priv
, iwl_rxon_ctx_from_vif(vif
),
2939 &sta_priv
->lq_sta
.lq
, CMD_ASYNC
, false);
2942 case IEEE80211_AMPDU_TX_OPERATIONAL
:
2943 buf_size
= min_t(int, buf_size
, LINK_QUAL_AGG_FRAME_LIMIT_DEF
);
2945 trans_txq_agg_setup(&priv
->trans
, iwl_sta_id(sta
), tid
,
2949 * If the limit is 0, then it wasn't initialised yet,
2950 * use the default. We can do that since we take the
2951 * minimum below, and we don't want to go above our
2952 * default due to hardware restrictions.
2954 if (sta_priv
->max_agg_bufsize
== 0)
2955 sta_priv
->max_agg_bufsize
=
2956 LINK_QUAL_AGG_FRAME_LIMIT_DEF
;
2959 * Even though in theory the peer could have different
2960 * aggregation reorder buffer sizes for different sessions,
2961 * our ucode doesn't allow for that and has a global limit
2962 * for each station. Therefore, use the minimum of all the
2963 * aggregation sessions and our default value.
2965 sta_priv
->max_agg_bufsize
=
2966 min(sta_priv
->max_agg_bufsize
, buf_size
);
2968 if (priv
->cfg
->ht_params
&&
2969 priv
->cfg
->ht_params
->use_rts_for_aggregation
) {
2971 * switch to RTS/CTS if it is the prefer protection
2972 * method for HT traffic
2975 sta_priv
->lq_sta
.lq
.general_params
.flags
|=
2976 LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK
;
2979 sta_priv
->lq_sta
.lq
.agg_params
.agg_frame_cnt_limit
=
2980 sta_priv
->max_agg_bufsize
;
2982 iwl_send_lq_cmd(priv
, iwl_rxon_ctx_from_vif(vif
),
2983 &sta_priv
->lq_sta
.lq
, CMD_ASYNC
, false);
2985 IWL_INFO(priv
, "Tx aggregation enabled on ra = %pM tid = %d\n",
2990 mutex_unlock(&priv
->mutex
);
2995 static int iwlagn_mac_sta_add(struct ieee80211_hw
*hw
,
2996 struct ieee80211_vif
*vif
,
2997 struct ieee80211_sta
*sta
)
2999 struct iwl_priv
*priv
= hw
->priv
;
3000 struct iwl_station_priv
*sta_priv
= (void *)sta
->drv_priv
;
3001 struct iwl_vif_priv
*vif_priv
= (void *)vif
->drv_priv
;
3002 bool is_ap
= vif
->type
== NL80211_IFTYPE_STATION
;
3006 IWL_DEBUG_INFO(priv
, "received request to add station %pM\n",
3008 mutex_lock(&priv
->mutex
);
3009 IWL_DEBUG_INFO(priv
, "proceeding to add station %pM\n",
3011 sta_priv
->common
.sta_id
= IWL_INVALID_STATION
;
3013 atomic_set(&sta_priv
->pending_frames
, 0);
3014 if (vif
->type
== NL80211_IFTYPE_AP
)
3015 sta_priv
->client
= true;
3017 ret
= iwl_add_station_common(priv
, vif_priv
->ctx
, sta
->addr
,
3018 is_ap
, sta
, &sta_id
);
3020 IWL_ERR(priv
, "Unable to add station %pM (%d)\n",
3022 /* Should we return success if return code is EEXIST ? */
3023 mutex_unlock(&priv
->mutex
);
3027 sta_priv
->common
.sta_id
= sta_id
;
3029 /* Initialize rate scaling */
3030 IWL_DEBUG_INFO(priv
, "Initializing rate scaling for station %pM\n",
3032 iwl_rs_rate_init(priv
, sta
, sta_id
);
3033 mutex_unlock(&priv
->mutex
);
3038 static void iwlagn_mac_channel_switch(struct ieee80211_hw
*hw
,
3039 struct ieee80211_channel_switch
*ch_switch
)
3041 struct iwl_priv
*priv
= hw
->priv
;
3042 const struct iwl_channel_info
*ch_info
;
3043 struct ieee80211_conf
*conf
= &hw
->conf
;
3044 struct ieee80211_channel
*channel
= ch_switch
->channel
;
3045 struct iwl_ht_config
*ht_conf
= &priv
->current_ht_config
;
3048 * When we add support for multiple interfaces, we need to
3049 * revisit this. The channel switch command in the device
3050 * only affects the BSS context, but what does that really
3051 * mean? And what if we get a CSA on the second interface?
3052 * This needs a lot of work.
3054 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
3057 IWL_DEBUG_MAC80211(priv
, "enter\n");
3059 mutex_lock(&priv
->mutex
);
3061 if (iwl_is_rfkill(priv
))
3064 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
) ||
3065 test_bit(STATUS_SCANNING
, &priv
->status
) ||
3066 test_bit(STATUS_CHANNEL_SWITCH_PENDING
, &priv
->status
))
3069 if (!iwl_is_associated_ctx(ctx
))
3072 if (!priv
->cfg
->lib
->set_channel_switch
)
3075 ch
= channel
->hw_value
;
3076 if (le16_to_cpu(ctx
->active
.channel
) == ch
)
3079 ch_info
= iwl_get_channel_info(priv
, channel
->band
, ch
);
3080 if (!is_channel_valid(ch_info
)) {
3081 IWL_DEBUG_MAC80211(priv
, "invalid channel\n");
3085 spin_lock_irq(&priv
->lock
);
3087 priv
->current_ht_config
.smps
= conf
->smps_mode
;
3089 /* Configure HT40 channels */
3090 ctx
->ht
.enabled
= conf_is_ht(conf
);
3091 if (ctx
->ht
.enabled
) {
3092 if (conf_is_ht40_minus(conf
)) {
3093 ctx
->ht
.extension_chan_offset
=
3094 IEEE80211_HT_PARAM_CHA_SEC_BELOW
;
3095 ctx
->ht
.is_40mhz
= true;
3096 } else if (conf_is_ht40_plus(conf
)) {
3097 ctx
->ht
.extension_chan_offset
=
3098 IEEE80211_HT_PARAM_CHA_SEC_ABOVE
;
3099 ctx
->ht
.is_40mhz
= true;
3101 ctx
->ht
.extension_chan_offset
=
3102 IEEE80211_HT_PARAM_CHA_SEC_NONE
;
3103 ctx
->ht
.is_40mhz
= false;
3106 ctx
->ht
.is_40mhz
= false;
3108 if ((le16_to_cpu(ctx
->staging
.channel
) != ch
))
3109 ctx
->staging
.flags
= 0;
3111 iwl_set_rxon_channel(priv
, channel
, ctx
);
3112 iwl_set_rxon_ht(priv
, ht_conf
);
3113 iwl_set_flags_for_band(priv
, ctx
, channel
->band
, ctx
->vif
);
3115 spin_unlock_irq(&priv
->lock
);
3119 * at this point, staging_rxon has the
3120 * configuration for channel switch
3122 set_bit(STATUS_CHANNEL_SWITCH_PENDING
, &priv
->status
);
3123 priv
->switch_channel
= cpu_to_le16(ch
);
3124 if (priv
->cfg
->lib
->set_channel_switch(priv
, ch_switch
)) {
3125 clear_bit(STATUS_CHANNEL_SWITCH_PENDING
, &priv
->status
);
3126 priv
->switch_channel
= 0;
3127 ieee80211_chswitch_done(ctx
->vif
, false);
3131 mutex_unlock(&priv
->mutex
);
3132 IWL_DEBUG_MAC80211(priv
, "leave\n");
3135 static void iwlagn_configure_filter(struct ieee80211_hw
*hw
,
3136 unsigned int changed_flags
,
3137 unsigned int *total_flags
,
3140 struct iwl_priv
*priv
= hw
->priv
;
3141 __le32 filter_or
= 0, filter_nand
= 0;
3142 struct iwl_rxon_context
*ctx
;
3144 #define CHK(test, flag) do { \
3145 if (*total_flags & (test)) \
3146 filter_or |= (flag); \
3148 filter_nand |= (flag); \
3151 IWL_DEBUG_MAC80211(priv
, "Enter: changed: 0x%x, total: 0x%x\n",
3152 changed_flags
, *total_flags
);
3154 CHK(FIF_OTHER_BSS
| FIF_PROMISC_IN_BSS
, RXON_FILTER_PROMISC_MSK
);
3155 /* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */
3156 CHK(FIF_CONTROL
, RXON_FILTER_CTL2HOST_MSK
| RXON_FILTER_PROMISC_MSK
);
3157 CHK(FIF_BCN_PRBRESP_PROMISC
, RXON_FILTER_BCON_AWARE_MSK
);
3161 mutex_lock(&priv
->mutex
);
3163 for_each_context(priv
, ctx
) {
3164 ctx
->staging
.filter_flags
&= ~filter_nand
;
3165 ctx
->staging
.filter_flags
|= filter_or
;
3168 * Not committing directly because hardware can perform a scan,
3169 * but we'll eventually commit the filter flags change anyway.
3173 mutex_unlock(&priv
->mutex
);
3176 * Receiving all multicast frames is always enabled by the
3177 * default flags setup in iwl_connection_init_rx_config()
3178 * since we currently do not support programming multicast
3179 * filters into the device.
3181 *total_flags
&= FIF_OTHER_BSS
| FIF_ALLMULTI
| FIF_PROMISC_IN_BSS
|
3182 FIF_BCN_PRBRESP_PROMISC
| FIF_CONTROL
;
3185 static void iwlagn_mac_flush(struct ieee80211_hw
*hw
, bool drop
)
3187 struct iwl_priv
*priv
= hw
->priv
;
3189 mutex_lock(&priv
->mutex
);
3190 IWL_DEBUG_MAC80211(priv
, "enter\n");
3192 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
)) {
3193 IWL_DEBUG_TX(priv
, "Aborting flush due to device shutdown\n");
3196 if (iwl_is_rfkill(priv
)) {
3197 IWL_DEBUG_TX(priv
, "Aborting flush due to RF Kill\n");
3202 * mac80211 will not push any more frames for transmit
3203 * until the flush is completed
3206 IWL_DEBUG_MAC80211(priv
, "send flush command\n");
3207 if (iwlagn_txfifo_flush(priv
, IWL_DROP_ALL
)) {
3208 IWL_ERR(priv
, "flush request fail\n");
3212 IWL_DEBUG_MAC80211(priv
, "wait transmit/flush all frames\n");
3213 iwlagn_wait_tx_queue_empty(priv
);
3215 mutex_unlock(&priv
->mutex
);
3216 IWL_DEBUG_MAC80211(priv
, "leave\n");
3219 void iwlagn_disable_roc(struct iwl_priv
*priv
)
3221 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_PAN
];
3223 lockdep_assert_held(&priv
->mutex
);
3225 if (!priv
->hw_roc_setup
)
3228 ctx
->staging
.dev_type
= RXON_DEV_TYPE_P2P
;
3229 ctx
->staging
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
3231 priv
->hw_roc_channel
= NULL
;
3233 memset(ctx
->staging
.node_addr
, 0, ETH_ALEN
);
3235 iwlagn_commit_rxon(priv
, ctx
);
3237 ctx
->is_active
= false;
3238 priv
->hw_roc_setup
= false;
3241 static void iwlagn_disable_roc_work(struct work_struct
*work
)
3243 struct iwl_priv
*priv
= container_of(work
, struct iwl_priv
,
3244 hw_roc_disable_work
.work
);
3246 mutex_lock(&priv
->mutex
);
3247 iwlagn_disable_roc(priv
);
3248 mutex_unlock(&priv
->mutex
);
3251 static int iwl_mac_remain_on_channel(struct ieee80211_hw
*hw
,
3252 struct ieee80211_channel
*channel
,
3253 enum nl80211_channel_type channel_type
,
3256 struct iwl_priv
*priv
= hw
->priv
;
3257 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_PAN
];
3260 if (!(priv
->valid_contexts
& BIT(IWL_RXON_CTX_PAN
)))
3263 if (!(ctx
->interface_modes
& BIT(NL80211_IFTYPE_P2P_CLIENT
)))
3266 mutex_lock(&priv
->mutex
);
3269 * TODO: Remove this hack! Firmware needs to be updated
3270 * to allow longer off-channel periods in scanning for
3271 * this use case, based on a flag (and we'll need an API
3272 * flag in the firmware when it has that).
3274 if (iwl_is_associated(priv
, IWL_RXON_CTX_BSS
) && duration
> 80)
3277 if (test_bit(STATUS_SCAN_HW
, &priv
->status
)) {
3282 priv
->hw_roc_channel
= channel
;
3283 priv
->hw_roc_chantype
= channel_type
;
3284 priv
->hw_roc_duration
= duration
;
3285 cancel_delayed_work(&priv
->hw_roc_disable_work
);
3287 if (!ctx
->is_active
) {
3288 ctx
->is_active
= true;
3289 ctx
->staging
.dev_type
= RXON_DEV_TYPE_P2P
;
3290 memcpy(ctx
->staging
.node_addr
,
3291 priv
->contexts
[IWL_RXON_CTX_BSS
].staging
.node_addr
,
3293 memcpy(ctx
->staging
.bssid_addr
,
3294 priv
->contexts
[IWL_RXON_CTX_BSS
].staging
.node_addr
,
3296 err
= iwlagn_commit_rxon(priv
, ctx
);
3299 ctx
->staging
.filter_flags
|= RXON_FILTER_ASSOC_MSK
|
3300 RXON_FILTER_PROMISC_MSK
|
3301 RXON_FILTER_CTL2HOST_MSK
;
3303 err
= iwlagn_commit_rxon(priv
, ctx
);
3305 iwlagn_disable_roc(priv
);
3308 priv
->hw_roc_setup
= true;
3311 err
= iwl_scan_initiate(priv
, ctx
->vif
, IWL_SCAN_ROC
, channel
->band
);
3313 iwlagn_disable_roc(priv
);
3316 mutex_unlock(&priv
->mutex
);
3321 static int iwl_mac_cancel_remain_on_channel(struct ieee80211_hw
*hw
)
3323 struct iwl_priv
*priv
= hw
->priv
;
3325 if (!(priv
->valid_contexts
& BIT(IWL_RXON_CTX_PAN
)))
3328 mutex_lock(&priv
->mutex
);
3329 iwl_scan_cancel_timeout(priv
, priv
->hw_roc_duration
);
3330 iwlagn_disable_roc(priv
);
3331 mutex_unlock(&priv
->mutex
);
3336 /*****************************************************************************
3338 * driver setup and teardown
3340 *****************************************************************************/
3342 static void iwl_setup_deferred_work(struct iwl_priv
*priv
)
3344 priv
->workqueue
= create_singlethread_workqueue(DRV_NAME
);
3346 init_waitqueue_head(&priv
->wait_command_queue
);
3348 INIT_WORK(&priv
->restart
, iwl_bg_restart
);
3349 INIT_WORK(&priv
->beacon_update
, iwl_bg_beacon_update
);
3350 INIT_WORK(&priv
->run_time_calib_work
, iwl_bg_run_time_calib_work
);
3351 INIT_WORK(&priv
->tx_flush
, iwl_bg_tx_flush
);
3352 INIT_WORK(&priv
->bt_full_concurrency
, iwl_bg_bt_full_concurrency
);
3353 INIT_WORK(&priv
->bt_runtime_config
, iwl_bg_bt_runtime_config
);
3354 INIT_DELAYED_WORK(&priv
->hw_roc_disable_work
,
3355 iwlagn_disable_roc_work
);
3357 iwl_setup_scan_deferred_work(priv
);
3359 if (priv
->cfg
->lib
->bt_setup_deferred_work
)
3360 priv
->cfg
->lib
->bt_setup_deferred_work(priv
);
3362 init_timer(&priv
->statistics_periodic
);
3363 priv
->statistics_periodic
.data
= (unsigned long)priv
;
3364 priv
->statistics_periodic
.function
= iwl_bg_statistics_periodic
;
3366 init_timer(&priv
->ucode_trace
);
3367 priv
->ucode_trace
.data
= (unsigned long)priv
;
3368 priv
->ucode_trace
.function
= iwl_bg_ucode_trace
;
3370 init_timer(&priv
->watchdog
);
3371 priv
->watchdog
.data
= (unsigned long)priv
;
3372 priv
->watchdog
.function
= iwl_bg_watchdog
;
3375 static void iwl_cancel_deferred_work(struct iwl_priv
*priv
)
3377 if (priv
->cfg
->lib
->cancel_deferred_work
)
3378 priv
->cfg
->lib
->cancel_deferred_work(priv
);
3380 cancel_work_sync(&priv
->run_time_calib_work
);
3381 cancel_work_sync(&priv
->beacon_update
);
3383 iwl_cancel_scan_deferred_work(priv
);
3385 cancel_work_sync(&priv
->bt_full_concurrency
);
3386 cancel_work_sync(&priv
->bt_runtime_config
);
3387 cancel_delayed_work_sync(&priv
->hw_roc_disable_work
);
3389 del_timer_sync(&priv
->statistics_periodic
);
3390 del_timer_sync(&priv
->ucode_trace
);
3393 static void iwl_init_hw_rates(struct iwl_priv
*priv
,
3394 struct ieee80211_rate
*rates
)
3398 for (i
= 0; i
< IWL_RATE_COUNT_LEGACY
; i
++) {
3399 rates
[i
].bitrate
= iwl_rates
[i
].ieee
* 5;
3400 rates
[i
].hw_value
= i
; /* Rate scaling will work on indexes */
3401 rates
[i
].hw_value_short
= i
;
3403 if ((i
>= IWL_FIRST_CCK_RATE
) && (i
<= IWL_LAST_CCK_RATE
)) {
3405 * If CCK != 1M then set short preamble rate flag.
3408 (iwl_rates
[i
].plcp
== IWL_RATE_1M_PLCP
) ?
3409 0 : IEEE80211_RATE_SHORT_PREAMBLE
;
3414 static int iwl_init_drv(struct iwl_priv
*priv
)
3418 spin_lock_init(&priv
->sta_lock
);
3419 spin_lock_init(&priv
->hcmd_lock
);
3421 mutex_init(&priv
->mutex
);
3423 priv
->ieee_channels
= NULL
;
3424 priv
->ieee_rates
= NULL
;
3425 priv
->band
= IEEE80211_BAND_2GHZ
;
3427 priv
->iw_mode
= NL80211_IFTYPE_STATION
;
3428 priv
->current_ht_config
.smps
= IEEE80211_SMPS_STATIC
;
3429 priv
->missed_beacon_threshold
= IWL_MISSED_BEACON_THRESHOLD_DEF
;
3430 priv
->agg_tids_count
= 0;
3432 /* initialize force reset */
3433 priv
->force_reset
[IWL_RF_RESET
].reset_duration
=
3434 IWL_DELAY_NEXT_FORCE_RF_RESET
;
3435 priv
->force_reset
[IWL_FW_RESET
].reset_duration
=
3436 IWL_DELAY_NEXT_FORCE_FW_RELOAD
;
3438 priv
->rx_statistics_jiffies
= jiffies
;
3440 /* Choose which receivers/antennas to use */
3441 iwlagn_set_rxon_chain(priv
, &priv
->contexts
[IWL_RXON_CTX_BSS
]);
3443 iwl_init_scan_params(priv
);
3446 if (priv
->cfg
->bt_params
&&
3447 priv
->cfg
->bt_params
->advanced_bt_coexist
) {
3448 priv
->kill_ack_mask
= IWLAGN_BT_KILL_ACK_MASK_DEFAULT
;
3449 priv
->kill_cts_mask
= IWLAGN_BT_KILL_CTS_MASK_DEFAULT
;
3450 priv
->bt_valid
= IWLAGN_BT_ALL_VALID_MSK
;
3451 priv
->bt_on_thresh
= BT_ON_THRESHOLD_DEF
;
3452 priv
->bt_duration
= BT_DURATION_LIMIT_DEF
;
3453 priv
->dynamic_frag_thresh
= BT_FRAG_THRESHOLD_DEF
;
3456 ret
= iwl_init_channel_map(priv
);
3458 IWL_ERR(priv
, "initializing regulatory failed: %d\n", ret
);
3462 ret
= iwlcore_init_geos(priv
);
3464 IWL_ERR(priv
, "initializing geos failed: %d\n", ret
);
3465 goto err_free_channel_map
;
3467 iwl_init_hw_rates(priv
, priv
->ieee_rates
);
3471 err_free_channel_map
:
3472 iwl_free_channel_map(priv
);
3477 static void iwl_uninit_drv(struct iwl_priv
*priv
)
3479 iwl_calib_free_results(priv
);
3480 iwlcore_free_geos(priv
);
3481 iwl_free_channel_map(priv
);
3482 kfree(priv
->scan_cmd
);
3483 kfree(priv
->beacon_cmd
);
3484 #ifdef CONFIG_IWLWIFI_DEBUGFS
3485 kfree(priv
->wowlan_sram
);
3489 static void iwl_mac_rssi_callback(struct ieee80211_hw
*hw
,
3490 enum ieee80211_rssi_event rssi_event
)
3492 struct iwl_priv
*priv
= hw
->priv
;
3494 mutex_lock(&priv
->mutex
);
3496 if (priv
->cfg
->bt_params
&&
3497 priv
->cfg
->bt_params
->advanced_bt_coexist
) {
3498 if (rssi_event
== RSSI_EVENT_LOW
)
3499 priv
->bt_enable_pspoll
= true;
3500 else if (rssi_event
== RSSI_EVENT_HIGH
)
3501 priv
->bt_enable_pspoll
= false;
3503 iwlagn_send_advance_bt_config(priv
);
3505 IWL_DEBUG_MAC80211(priv
, "Advanced BT coex disabled,"
3506 "ignoring RSSI callback\n");
3509 mutex_unlock(&priv
->mutex
);
3512 struct ieee80211_ops iwlagn_hw_ops
= {
3513 .tx
= iwlagn_mac_tx
,
3514 .start
= iwlagn_mac_start
,
3515 .stop
= iwlagn_mac_stop
,
3517 .suspend
= iwlagn_mac_suspend
,
3518 .resume
= iwlagn_mac_resume
,
3520 .add_interface
= iwl_mac_add_interface
,
3521 .remove_interface
= iwl_mac_remove_interface
,
3522 .change_interface
= iwl_mac_change_interface
,
3523 .config
= iwlagn_mac_config
,
3524 .configure_filter
= iwlagn_configure_filter
,
3525 .set_key
= iwlagn_mac_set_key
,
3526 .update_tkip_key
= iwlagn_mac_update_tkip_key
,
3527 .set_rekey_data
= iwlagn_mac_set_rekey_data
,
3528 .conf_tx
= iwl_mac_conf_tx
,
3529 .bss_info_changed
= iwlagn_bss_info_changed
,
3530 .ampdu_action
= iwlagn_mac_ampdu_action
,
3531 .hw_scan
= iwl_mac_hw_scan
,
3532 .sta_notify
= iwlagn_mac_sta_notify
,
3533 .sta_add
= iwlagn_mac_sta_add
,
3534 .sta_remove
= iwl_mac_sta_remove
,
3535 .channel_switch
= iwlagn_mac_channel_switch
,
3536 .flush
= iwlagn_mac_flush
,
3537 .tx_last_beacon
= iwl_mac_tx_last_beacon
,
3538 .remain_on_channel
= iwl_mac_remain_on_channel
,
3539 .cancel_remain_on_channel
= iwl_mac_cancel_remain_on_channel
,
3540 .rssi_callback
= iwl_mac_rssi_callback
,
3541 CFG80211_TESTMODE_CMD(iwl_testmode_cmd
)
3542 CFG80211_TESTMODE_DUMP(iwl_testmode_dump
)
3545 static u32
iwl_hw_detect(struct iwl_priv
*priv
)
3547 return iwl_read32(priv
, CSR_HW_REV
);
3550 static int iwl_set_hw_params(struct iwl_priv
*priv
)
3552 priv
->hw_params
.max_rxq_size
= RX_QUEUE_SIZE
;
3553 priv
->hw_params
.max_rxq_log
= RX_QUEUE_SIZE_LOG
;
3554 if (iwlagn_mod_params
.amsdu_size_8K
)
3555 priv
->hw_params
.rx_page_order
= get_order(IWL_RX_BUF_SIZE_8K
);
3557 priv
->hw_params
.rx_page_order
= get_order(IWL_RX_BUF_SIZE_4K
);
3559 priv
->hw_params
.max_beacon_itrvl
= IWL_MAX_UCODE_BEACON_INTERVAL
;
3561 if (iwlagn_mod_params
.disable_11n
)
3562 priv
->cfg
->sku
&= ~EEPROM_SKU_CAP_11N_ENABLE
;
3564 /* Device-specific setup */
3565 return priv
->cfg
->lib
->set_hw_params(priv
);
3568 /* This function both allocates and initializes hw and priv. */
3569 static struct ieee80211_hw
*iwl_alloc_all(struct iwl_cfg
*cfg
)
3571 struct iwl_priv
*priv
;
3572 /* mac80211 allocates memory for this device instance, including
3573 * space for this driver's private structure */
3574 struct ieee80211_hw
*hw
;
3576 hw
= ieee80211_alloc_hw(sizeof(struct iwl_priv
), &iwlagn_hw_ops
);
3578 pr_err("%s: Can not allocate network device\n",
3590 int iwl_probe(struct iwl_bus
*bus
, struct iwl_cfg
*cfg
)
3593 struct iwl_priv
*priv
;
3594 struct ieee80211_hw
*hw
;
3598 /************************
3599 * 1. Allocating HW data
3600 ************************/
3601 hw
= iwl_alloc_all(cfg
);
3609 bus_set_drv_data(priv
->bus
, priv
);
3611 /* At this point both hw and priv are allocated. */
3613 SET_IEEE80211_DEV(hw
, priv
->bus
->dev
);
3615 IWL_DEBUG_INFO(priv
, "*** LOAD DRIVER ***\n");
3617 priv
->inta_mask
= CSR_INI_SET_MASK
;
3619 /* is antenna coupling more than 35dB ? */
3620 priv
->bt_ant_couple_ok
=
3621 (iwlagn_ant_coupling
> IWL_BT_ANTENNA_COUPLING_THRESHOLD
) ?
3624 /* enable/disable bt channel inhibition */
3625 priv
->bt_ch_announce
= iwlagn_bt_ch_announce
;
3626 IWL_DEBUG_INFO(priv
, "BT channel inhibition is %s\n",
3627 (priv
->bt_ch_announce
) ? "On" : "Off");
3629 if (iwl_alloc_traffic_mem(priv
))
3630 IWL_ERR(priv
, "Not enough memory to generate traffic log\n");
3632 /* these spin locks will be used in apm_ops.init and EEPROM access
3633 * we should init now
3635 spin_lock_init(&priv
->reg_lock
);
3636 spin_lock_init(&priv
->lock
);
3639 * stop and reset the on-board processor just in case it is in a
3640 * strange state ... like being left stranded by a primary kernel
3641 * and this is now the kdump kernel trying to start up
3643 iwl_write32(priv
, CSR_RESET
, CSR_RESET_REG_FLAG_NEVO_RESET
);
3645 /***********************
3646 * 3. Read REV register
3647 ***********************/
3648 hw_rev
= iwl_hw_detect(priv
);
3649 IWL_INFO(priv
, "Detected %s, REV=0x%X\n",
3650 priv
->cfg
->name
, hw_rev
);
3652 err
= iwl_trans_register(&priv
->trans
, priv
);
3654 goto out_free_traffic_mem
;
3656 if (trans_prepare_card_hw(&priv
->trans
)) {
3658 IWL_WARN(priv
, "Failed, HW not ready\n");
3659 goto out_free_trans
;
3665 /* Read the EEPROM */
3666 err
= iwl_eeprom_init(priv
, hw_rev
);
3668 IWL_ERR(priv
, "Unable to init EEPROM\n");
3669 goto out_free_trans
;
3671 err
= iwl_eeprom_check_version(priv
);
3673 goto out_free_eeprom
;
3675 err
= iwl_eeprom_check_sku(priv
);
3677 goto out_free_eeprom
;
3679 /* extract MAC Address */
3680 iwl_eeprom_get_mac(priv
, priv
->addresses
[0].addr
);
3681 IWL_DEBUG_INFO(priv
, "MAC address: %pM\n", priv
->addresses
[0].addr
);
3682 priv
->hw
->wiphy
->addresses
= priv
->addresses
;
3683 priv
->hw
->wiphy
->n_addresses
= 1;
3684 num_mac
= iwl_eeprom_query16(priv
, EEPROM_NUM_MAC_ADDRESS
);
3686 memcpy(priv
->addresses
[1].addr
, priv
->addresses
[0].addr
,
3688 priv
->addresses
[1].addr
[5]++;
3689 priv
->hw
->wiphy
->n_addresses
++;
3692 /************************
3693 * 5. Setup HW constants
3694 ************************/
3695 if (iwl_set_hw_params(priv
)) {
3697 IWL_ERR(priv
, "failed to set hw parameters\n");
3698 goto out_free_eeprom
;
3701 /*******************
3703 *******************/
3705 err
= iwl_init_drv(priv
);
3707 goto out_free_eeprom
;
3708 /* At this point both hw and priv are initialized. */
3710 /********************
3712 ********************/
3713 iwl_setup_deferred_work(priv
);
3714 iwl_setup_rx_handlers(priv
);
3715 iwl_testmode_init(priv
);
3717 /*********************************************
3718 * 8. Enable interrupts
3719 *********************************************/
3721 iwl_enable_rfkill_int(priv
);
3723 /* If platform's RF_KILL switch is NOT set to KILL */
3724 if (iwl_read32(priv
, CSR_GP_CNTRL
) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW
)
3725 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
3727 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
3729 wiphy_rfkill_set_hw_state(priv
->hw
->wiphy
,
3730 test_bit(STATUS_RF_KILL_HW
, &priv
->status
));
3732 iwl_power_initialize(priv
);
3733 iwl_tt_initialize(priv
);
3735 init_completion(&priv
->firmware_loading_complete
);
3737 err
= iwl_request_firmware(priv
, true);
3739 goto out_destroy_workqueue
;
3743 out_destroy_workqueue
:
3744 destroy_workqueue(priv
->workqueue
);
3745 priv
->workqueue
= NULL
;
3746 iwl_uninit_drv(priv
);
3748 iwl_eeprom_free(priv
);
3750 trans_free(&priv
->trans
);
3751 out_free_traffic_mem
:
3752 iwl_free_traffic_mem(priv
);
3753 ieee80211_free_hw(priv
->hw
);
3758 void __devexit
iwl_remove(struct iwl_priv
* priv
)
3760 unsigned long flags
;
3762 wait_for_completion(&priv
->firmware_loading_complete
);
3764 IWL_DEBUG_INFO(priv
, "*** UNLOAD DRIVER ***\n");
3766 iwl_dbgfs_unregister(priv
);
3767 sysfs_remove_group(&priv
->bus
->dev
->kobj
,
3768 &iwl_attribute_group
);
3770 /* ieee80211_unregister_hw call wil cause iwl_mac_stop to
3771 * to be called and iwl_down since we are removing the device
3772 * we need to set STATUS_EXIT_PENDING bit.
3774 set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
3776 iwl_testmode_cleanup(priv
);
3777 iwl_leds_exit(priv
);
3779 if (priv
->mac80211_registered
) {
3780 ieee80211_unregister_hw(priv
->hw
);
3781 priv
->mac80211_registered
= 0;
3784 /* Reset to low power before unloading driver. */
3789 /* make sure we flush any pending irq or
3790 * tasklet for the driver
3792 spin_lock_irqsave(&priv
->lock
, flags
);
3793 iwl_disable_interrupts(priv
);
3794 spin_unlock_irqrestore(&priv
->lock
, flags
);
3796 trans_sync_irq(&priv
->trans
);
3798 iwl_dealloc_ucode(priv
);
3800 trans_rx_free(&priv
->trans
);
3801 trans_tx_free(&priv
->trans
);
3803 iwl_eeprom_free(priv
);
3805 /*netif_stop_queue(dev); */
3806 flush_workqueue(priv
->workqueue
);
3808 /* ieee80211_unregister_hw calls iwl_mac_stop, which flushes
3809 * priv->workqueue... so we can't take down the workqueue
3811 destroy_workqueue(priv
->workqueue
);
3812 priv
->workqueue
= NULL
;
3813 iwl_free_traffic_mem(priv
);
3815 trans_free(&priv
->trans
);
3817 bus_set_drv_data(priv
->bus
, NULL
);
3819 iwl_uninit_drv(priv
);
3821 dev_kfree_skb(priv
->beacon_skb
);
3823 ieee80211_free_hw(priv
->hw
);
3827 /*****************************************************************************
3829 * driver and module entry point
3831 *****************************************************************************/
3832 static int __init
iwl_init(void)
3836 pr_info(DRV_DESCRIPTION
", " DRV_VERSION
"\n");
3837 pr_info(DRV_COPYRIGHT
"\n");
3839 ret
= iwlagn_rate_control_register();
3841 pr_err("Unable to register rate control algorithm: %d\n", ret
);
3845 ret
= iwl_pci_register_driver();
3848 goto error_register
;
3852 iwlagn_rate_control_unregister();
3856 static void __exit
iwl_exit(void)
3858 iwl_pci_unregister_driver();
3859 iwlagn_rate_control_unregister();
3862 module_exit(iwl_exit
);
3863 module_init(iwl_init
);
3865 #ifdef CONFIG_IWLWIFI_DEBUG
3866 module_param_named(debug
, iwl_debug_level
, uint
, S_IRUGO
| S_IWUSR
);
3867 MODULE_PARM_DESC(debug
, "debug output mask");
3870 module_param_named(swcrypto
, iwlagn_mod_params
.sw_crypto
, int, S_IRUGO
);
3871 MODULE_PARM_DESC(swcrypto
, "using crypto in software (default 0 [hardware])");
3872 module_param_named(queues_num
, iwlagn_mod_params
.num_of_queues
, int, S_IRUGO
);
3873 MODULE_PARM_DESC(queues_num
, "number of hw queues.");
3874 module_param_named(11n_disable
, iwlagn_mod_params
.disable_11n
, int, S_IRUGO
);
3875 MODULE_PARM_DESC(11n_disable
, "disable 11n functionality");
3876 module_param_named(amsdu_size_8K
, iwlagn_mod_params
.amsdu_size_8K
,
3878 MODULE_PARM_DESC(amsdu_size_8K
, "enable 8K amsdu size");
3879 module_param_named(fw_restart
, iwlagn_mod_params
.restart_fw
, int, S_IRUGO
);
3880 MODULE_PARM_DESC(fw_restart
, "restart firmware in case of error");
3882 module_param_named(ucode_alternative
, iwlagn_wanted_ucode_alternative
, int,
3884 MODULE_PARM_DESC(ucode_alternative
,
3885 "specify ucode alternative to use from ucode file");
3887 module_param_named(antenna_coupling
, iwlagn_ant_coupling
, int, S_IRUGO
);
3888 MODULE_PARM_DESC(antenna_coupling
,
3889 "specify antenna coupling in dB (defualt: 0 dB)");
3891 module_param_named(bt_ch_inhibition
, iwlagn_bt_ch_announce
, bool, S_IRUGO
);
3892 MODULE_PARM_DESC(bt_ch_inhibition
,
3893 "Disable BT channel inhibition (default: enable)");
3895 module_param_named(plcp_check
, iwlagn_mod_params
.plcp_check
, bool, S_IRUGO
);
3896 MODULE_PARM_DESC(plcp_check
, "Check plcp health (default: 1 [enabled])");
3898 module_param_named(ack_check
, iwlagn_mod_params
.ack_check
, bool, S_IRUGO
);
3899 MODULE_PARM_DESC(ack_check
, "Check ack health (default: 0 [disabled])");
3901 module_param_named(wd_disable
, iwlagn_mod_params
.wd_disable
, bool, S_IRUGO
);
3902 MODULE_PARM_DESC(wd_disable
,
3903 "Disable stuck queue watchdog timer (default: 0 [enabled])");
3906 * set bt_coex_active to true, uCode will do kill/defer
3907 * every time the priority line is asserted (BT is sending signals on the
3908 * priority line in the PCIx).
3909 * set bt_coex_active to false, uCode will ignore the BT activity and
3910 * perform the normal operation
3912 * User might experience transmit issue on some platform due to WiFi/BT
3913 * co-exist problem. The possible behaviors are:
3914 * Able to scan and finding all the available AP
3915 * Not able to associate with any AP
3916 * On those platforms, WiFi communication can be restored by set
3917 * "bt_coex_active" module parameter to "false"
3919 * default: bt_coex_active = true (BT_COEX_ENABLE)
3921 module_param_named(bt_coex_active
, iwlagn_mod_params
.bt_coex_active
,
3923 MODULE_PARM_DESC(bt_coex_active
, "enable wifi/bt co-exist (default: enable)");
3925 module_param_named(led_mode
, iwlagn_mod_params
.led_mode
, int, S_IRUGO
);
3926 MODULE_PARM_DESC(led_mode
, "0=system default, "
3927 "1=On(RF On)/Off(RF Off), 2=blinking (default: 0)");
3929 module_param_named(power_save
, iwlagn_mod_params
.power_save
,
3931 MODULE_PARM_DESC(power_save
,
3932 "enable WiFi power management (default: disable)");
3934 module_param_named(power_level
, iwlagn_mod_params
.power_level
,
3936 MODULE_PARM_DESC(power_level
,
3937 "default power save level (range from 1 - 5, default: 1)");
3940 * For now, keep using power level 1 instead of automatically
3943 module_param_named(no_sleep_autoadjust
, iwlagn_mod_params
.no_sleep_autoadjust
,
3945 MODULE_PARM_DESC(no_sleep_autoadjust
,
3946 "don't automatically adjust sleep level "
3947 "according to maximum network latency (default: true)");