2 pf.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
3 Under the terms of the GNU General Public License.
5 This is the high-level driver for parallel port ATAPI disk
6 drives based on chips supported by the paride module.
8 By default, the driver will autoprobe for a single parallel
9 port ATAPI disk drive, but if their individual parameters are
10 specified, the driver can handle up to 4 drives.
12 The behaviour of the pf driver can be altered by setting
13 some parameters from the insmod command line. The following
14 parameters are adjustable:
16 drive0 These four arguments can be arrays of
17 drive1 1-7 integers as follows:
19 drive3 <prt>,<pro>,<uni>,<mod>,<slv>,<lun>,<dly>
23 <prt> is the base of the parallel port address for
24 the corresponding drive. (required)
26 <pro> is the protocol number for the adapter that
27 supports this drive. These numbers are
28 logged by 'paride' when the protocol modules
29 are initialised. (0 if not given)
31 <uni> for those adapters that support chained
32 devices, this is the unit selector for the
33 chain of devices on the given port. It should
34 be zero for devices that don't support chaining.
37 <mod> this can be -1 to choose the best mode, or one
38 of the mode numbers supported by the adapter.
41 <slv> ATAPI CDroms can be jumpered to master or slave.
42 Set this to 0 to choose the master drive, 1 to
43 choose the slave, -1 (the default) to choose the
46 <lun> Some ATAPI devices support multiple LUNs.
47 One example is the ATAPI PD/CD drive from
48 Matshita/Panasonic. This device has a
49 CD drive on LUN 0 and a PD drive on LUN 1.
50 By default, the driver will search for the
51 first LUN with a supported device. Set
52 this parameter to force it to use a specific
55 <dly> some parallel ports require the driver to
56 go more slowly. -1 sets a default value that
57 should work with the chosen protocol. Otherwise,
58 set this to a small integer, the larger it is
59 the slower the port i/o. In some cases, setting
60 this to zero will speed up the device. (default -1)
62 major You may use this parameter to overide the
63 default major number (47) that this driver
64 will use. Be sure to change the device
67 name This parameter is a character string that
68 contains the name the kernel will use for this
69 device (in /proc output, for instance).
72 cluster The driver will attempt to aggregate requests
73 for adjacent blocks into larger multi-block
74 clusters. The maximum cluster size (in 512
75 byte sectors) is set with this parameter.
78 verbose This parameter controls the amount of logging
79 that the driver will do. Set it to 0 for
80 normal operation, 1 to see autoprobe progress
81 messages, or 2 to see additional debugging
84 nice This parameter controls the driver's use of
85 idle CPU time, at the expense of some speed.
87 If this driver is built into the kernel, you can use the
88 following command line parameters, with the same values
89 as the corresponding module parameters listed above:
98 In addition, you can use the parameter pf.disable to disable
105 1.01 GRG 1998.05.03 Changes for SMP. Eliminate sti().
106 Fix for drives that don't clear STAT_ERR
107 until after next CDB delivered.
108 Small change in pf_completion to round
110 1.02 GRG 1998.06.16 Eliminated an Ugh
111 1.03 GRG 1998.08.16 Use HZ in loop timings, extra debugging
112 1.04 GRG 1998.09.24 Added jumbo support
116 #define PF_VERSION "1.04"
121 /* Here are things one can override from the insmod command.
122 Most are autoprobed by paride unless set here. Verbose is off
127 static int verbose
= 0;
128 static int major
= PF_MAJOR
;
129 static char *name
= PF_NAME
;
130 static int cluster
= 64;
132 static int disable
= 0;
134 static int drive0
[7] = { 0, 0, 0, -1, -1, -1, -1 };
135 static int drive1
[7] = { 0, 0, 0, -1, -1, -1, -1 };
136 static int drive2
[7] = { 0, 0, 0, -1, -1, -1, -1 };
137 static int drive3
[7] = { 0, 0, 0, -1, -1, -1, -1 };
139 static int (*drives
[4])[7] = {&drive0
, &drive1
, &drive2
, &drive3
};
140 static int pf_drive_count
;
142 enum {D_PRT
, D_PRO
, D_UNI
, D_MOD
, D_SLV
, D_LUN
, D_DLY
};
144 /* end of parameters */
146 #include <linux/module.h>
147 #include <linux/init.h>
148 #include <linux/fs.h>
149 #include <linux/delay.h>
150 #include <linux/hdreg.h>
151 #include <linux/cdrom.h>
152 #include <linux/spinlock.h>
153 #include <linux/blkdev.h>
154 #include <linux/blkpg.h>
155 #include <linux/smp_lock.h>
156 #include <asm/uaccess.h>
158 static DEFINE_SPINLOCK(pf_spin_lock
);
160 module_param(verbose
, bool, 0644);
161 module_param(major
, int, 0);
162 module_param(name
, charp
, 0);
163 module_param(cluster
, int, 0);
164 module_param(nice
, int, 0);
165 module_param_array(drive0
, int, NULL
, 0);
166 module_param_array(drive1
, int, NULL
, 0);
167 module_param_array(drive2
, int, NULL
, 0);
168 module_param_array(drive3
, int, NULL
, 0);
173 /* constants for faking geometry numbers */
175 #define PF_FD_MAX 8192 /* use FD geometry under this size */
181 #define PF_MAX_RETRIES 5
182 #define PF_TMO 800 /* interrupt timeout in jiffies */
183 #define PF_SPIN_DEL 50 /* spin delay in micro-seconds */
185 #define PF_SPIN (1000000*PF_TMO)/(HZ*PF_SPIN_DEL)
187 #define STAT_ERR 0x00001
188 #define STAT_INDEX 0x00002
189 #define STAT_ECC 0x00004
190 #define STAT_DRQ 0x00008
191 #define STAT_SEEK 0x00010
192 #define STAT_WRERR 0x00020
193 #define STAT_READY 0x00040
194 #define STAT_BUSY 0x00080
196 #define ATAPI_REQ_SENSE 0x03
197 #define ATAPI_LOCK 0x1e
198 #define ATAPI_DOOR 0x1b
199 #define ATAPI_MODE_SENSE 0x5a
200 #define ATAPI_CAPACITY 0x25
201 #define ATAPI_IDENTIFY 0x12
202 #define ATAPI_READ_10 0x28
203 #define ATAPI_WRITE_10 0x2a
205 static int pf_open(struct block_device
*bdev
, fmode_t mode
);
206 static void do_pf_request(struct request_queue
* q
);
207 static int pf_ioctl(struct block_device
*bdev
, fmode_t mode
,
208 unsigned int cmd
, unsigned long arg
);
209 static int pf_getgeo(struct block_device
*bdev
, struct hd_geometry
*geo
);
211 static int pf_release(struct gendisk
*disk
, fmode_t mode
);
213 static int pf_detect(void);
214 static void do_pf_read(void);
215 static void do_pf_read_start(void);
216 static void do_pf_write(void);
217 static void do_pf_write_start(void);
218 static void do_pf_read_drq(void);
219 static void do_pf_write_done(void);
228 struct pi_adapter pia
; /* interface to paride layer */
229 struct pi_adapter
*pi
;
230 int removable
; /* removable media device ? */
231 int media_status
; /* media present ? WP ? */
232 int drive
; /* drive */
234 int access
; /* count of active opens ... */
235 int present
; /* device present ? */
236 char name
[PF_NAMELEN
]; /* pf0, pf1, ... */
237 struct gendisk
*disk
;
240 static struct pf_unit units
[PF_UNITS
];
242 static int pf_identify(struct pf_unit
*pf
);
243 static void pf_lock(struct pf_unit
*pf
, int func
);
244 static void pf_eject(struct pf_unit
*pf
);
245 static int pf_check_media(struct gendisk
*disk
);
247 static char pf_scratch
[512]; /* scratch block buffer */
249 /* the variables below are used mainly in the I/O request engine, which
250 processes only one request at a time.
253 static int pf_retries
= 0; /* i/o error retry count */
254 static int pf_busy
= 0; /* request being processed ? */
255 static struct request
*pf_req
; /* current request */
256 static int pf_block
; /* address of next requested block */
257 static int pf_count
; /* number of blocks still to do */
258 static int pf_run
; /* sectors in current cluster */
259 static int pf_cmd
; /* current command READ/WRITE */
260 static struct pf_unit
*pf_current
;/* unit of current request */
261 static int pf_mask
; /* stopper for pseudo-int */
262 static char *pf_buf
; /* buffer for request in progress */
264 /* kernel glue structures */
266 static const struct block_device_operations pf_fops
= {
267 .owner
= THIS_MODULE
,
269 .release
= pf_release
,
272 .media_changed
= pf_check_media
,
275 static void __init
pf_init_units(void)
281 for (unit
= 0, pf
= units
; unit
< PF_UNITS
; unit
++, pf
++) {
282 struct gendisk
*disk
= alloc_disk(1);
287 pf
->media_status
= PF_NM
;
288 pf
->drive
= (*drives
[unit
])[D_SLV
];
289 pf
->lun
= (*drives
[unit
])[D_LUN
];
290 snprintf(pf
->name
, PF_NAMELEN
, "%s%d", name
, unit
);
292 disk
->first_minor
= unit
;
293 strcpy(disk
->disk_name
, pf
->name
);
294 disk
->fops
= &pf_fops
;
295 if (!(*drives
[unit
])[D_PRT
])
300 static int pf_open(struct block_device
*bdev
, fmode_t mode
)
302 struct pf_unit
*pf
= bdev
->bd_disk
->private_data
;
309 if (pf
->media_status
== PF_NM
)
313 if ((pf
->media_status
== PF_RO
) && (mode
& FMODE_WRITE
))
325 static int pf_getgeo(struct block_device
*bdev
, struct hd_geometry
*geo
)
327 struct pf_unit
*pf
= bdev
->bd_disk
->private_data
;
328 sector_t capacity
= get_capacity(pf
->disk
);
330 if (capacity
< PF_FD_MAX
) {
331 geo
->cylinders
= sector_div(capacity
, PF_FD_HDS
* PF_FD_SPT
);
332 geo
->heads
= PF_FD_HDS
;
333 geo
->sectors
= PF_FD_SPT
;
335 geo
->cylinders
= sector_div(capacity
, PF_HD_HDS
* PF_HD_SPT
);
336 geo
->heads
= PF_HD_HDS
;
337 geo
->sectors
= PF_HD_SPT
;
343 static int pf_ioctl(struct block_device
*bdev
, fmode_t mode
, unsigned int cmd
, unsigned long arg
)
345 struct pf_unit
*pf
= bdev
->bd_disk
->private_data
;
347 if (cmd
!= CDROMEJECT
)
359 static int pf_release(struct gendisk
*disk
, fmode_t mode
)
361 struct pf_unit
*pf
= disk
->private_data
;
364 if (pf
->access
<= 0) {
371 if (!pf
->access
&& pf
->removable
)
379 static int pf_check_media(struct gendisk
*disk
)
384 static inline int status_reg(struct pf_unit
*pf
)
386 return pi_read_regr(pf
->pi
, 1, 6);
389 static inline int read_reg(struct pf_unit
*pf
, int reg
)
391 return pi_read_regr(pf
->pi
, 0, reg
);
394 static inline void write_reg(struct pf_unit
*pf
, int reg
, int val
)
396 pi_write_regr(pf
->pi
, 0, reg
, val
);
399 static int pf_wait(struct pf_unit
*pf
, int go
, int stop
, char *fun
, char *msg
)
404 while ((((r
= status_reg(pf
)) & go
) || (stop
&& (!(r
& stop
))))
408 if ((r
& (STAT_ERR
& stop
)) || (j
> PF_SPIN
)) {
415 printk("%s: %s %s: alt=0x%x stat=0x%x err=0x%x"
416 " loop=%d phase=%d\n",
417 pf
->name
, fun
, msg
, r
, s
, e
, j
, p
);
423 static int pf_command(struct pf_unit
*pf
, char *cmd
, int dlen
, char *fun
)
427 write_reg(pf
, 6, 0xa0+0x10*pf
->drive
);
429 if (pf_wait(pf
, STAT_BUSY
| STAT_DRQ
, 0, fun
, "before command")) {
430 pi_disconnect(pf
->pi
);
434 write_reg(pf
, 4, dlen
% 256);
435 write_reg(pf
, 5, dlen
/ 256);
436 write_reg(pf
, 7, 0xa0); /* ATAPI packet command */
438 if (pf_wait(pf
, STAT_BUSY
, STAT_DRQ
, fun
, "command DRQ")) {
439 pi_disconnect(pf
->pi
);
443 if (read_reg(pf
, 2) != 1) {
444 printk("%s: %s: command phase error\n", pf
->name
, fun
);
445 pi_disconnect(pf
->pi
);
449 pi_write_block(pf
->pi
, cmd
, 12);
454 static int pf_completion(struct pf_unit
*pf
, char *buf
, char *fun
)
458 r
= pf_wait(pf
, STAT_BUSY
, STAT_DRQ
| STAT_READY
| STAT_ERR
,
461 if ((read_reg(pf
, 2) & 2) && (read_reg(pf
, 7) & STAT_DRQ
)) {
462 n
= (((read_reg(pf
, 4) + 256 * read_reg(pf
, 5)) +
464 pi_read_block(pf
->pi
, buf
, n
);
467 s
= pf_wait(pf
, STAT_BUSY
, STAT_READY
| STAT_ERR
, fun
, "data done");
469 pi_disconnect(pf
->pi
);
474 static void pf_req_sense(struct pf_unit
*pf
, int quiet
)
477 { ATAPI_REQ_SENSE
, pf
->lun
<< 5, 0, 0, 16, 0, 0, 0, 0, 0, 0, 0 };
481 r
= pf_command(pf
, rs_cmd
, 16, "Request sense");
484 pf_completion(pf
, buf
, "Request sense");
486 if ((!r
) && (!quiet
))
487 printk("%s: Sense key: %x, ASC: %x, ASQ: %x\n",
488 pf
->name
, buf
[2] & 0xf, buf
[12], buf
[13]);
491 static int pf_atapi(struct pf_unit
*pf
, char *cmd
, int dlen
, char *buf
, char *fun
)
495 r
= pf_command(pf
, cmd
, dlen
, fun
);
498 r
= pf_completion(pf
, buf
, fun
);
500 pf_req_sense(pf
, !fun
);
505 static void pf_lock(struct pf_unit
*pf
, int func
)
507 char lo_cmd
[12] = { ATAPI_LOCK
, pf
->lun
<< 5, 0, 0, func
, 0, 0, 0, 0, 0, 0, 0 };
509 pf_atapi(pf
, lo_cmd
, 0, pf_scratch
, func
? "lock" : "unlock");
512 static void pf_eject(struct pf_unit
*pf
)
514 char ej_cmd
[12] = { ATAPI_DOOR
, pf
->lun
<< 5, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0 };
517 pf_atapi(pf
, ej_cmd
, 0, pf_scratch
, "eject");
520 #define PF_RESET_TMO 30 /* in tenths of a second */
522 static void pf_sleep(int cs
)
524 schedule_timeout_interruptible(cs
);
527 /* the ATAPI standard actually specifies the contents of all 7 registers
528 after a reset, but the specification is ambiguous concerning the last
529 two bytes, and different drives interpret the standard differently.
532 static int pf_reset(struct pf_unit
*pf
)
535 int expect
[5] = { 1, 1, 1, 0x14, 0xeb };
538 write_reg(pf
, 6, 0xa0+0x10*pf
->drive
);
541 pf_sleep(20 * HZ
/ 1000);
544 while ((k
++ < PF_RESET_TMO
) && (status_reg(pf
) & STAT_BUSY
))
548 for (i
= 0; i
< 5; i
++)
549 flg
&= (read_reg(pf
, i
+ 1) == expect
[i
]);
552 printk("%s: Reset (%d) signature = ", pf
->name
, k
);
553 for (i
= 0; i
< 5; i
++)
554 printk("%3x", read_reg(pf
, i
+ 1));
556 printk(" (incorrect)");
560 pi_disconnect(pf
->pi
);
564 static void pf_mode_sense(struct pf_unit
*pf
)
567 { ATAPI_MODE_SENSE
, pf
->lun
<< 5, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0 };
570 pf_atapi(pf
, ms_cmd
, 8, buf
, "mode sense");
571 pf
->media_status
= PF_RW
;
573 pf
->media_status
= PF_RO
;
576 static void xs(char *buf
, char *targ
, int offs
, int len
)
582 for (k
= 0; k
< len
; k
++)
583 if ((buf
[k
+ offs
] != 0x20) || (buf
[k
+ offs
] != l
))
584 l
= targ
[j
++] = buf
[k
+ offs
];
590 static int xl(char *buf
, int offs
)
595 for (k
= 0; k
< 4; k
++)
596 v
= v
* 256 + (buf
[k
+ offs
] & 0xff);
600 static void pf_get_capacity(struct pf_unit
*pf
)
602 char rc_cmd
[12] = { ATAPI_CAPACITY
, pf
->lun
<< 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
606 if (pf_atapi(pf
, rc_cmd
, 8, buf
, "get capacity")) {
607 pf
->media_status
= PF_NM
;
610 set_capacity(pf
->disk
, xl(buf
, 0) + 1);
613 set_capacity(pf
->disk
, 0);
615 printk("%s: Drive %d, LUN %d,"
616 " unsupported block size %d\n",
617 pf
->name
, pf
->drive
, pf
->lun
, bs
);
621 static int pf_identify(struct pf_unit
*pf
)
624 char *ms
[2] = { "master", "slave" };
627 { ATAPI_IDENTIFY
, pf
->lun
<< 5, 0, 0, 36, 0, 0, 0, 0, 0, 0, 0 };
630 s
= pf_atapi(pf
, id_cmd
, 36, buf
, "identify");
635 if ((dt
!= 0) && (dt
!= 7)) {
637 printk("%s: Drive %d, LUN %d, unsupported type %d\n",
638 pf
->name
, pf
->drive
, pf
->lun
, dt
);
645 pf
->removable
= (buf
[1] & 0x80);
653 printk("%s: %s %s, %s LUN %d, type %d",
654 pf
->name
, mf
, id
, ms
[pf
->drive
], pf
->lun
, dt
);
656 printk(", removable");
657 if (pf
->media_status
== PF_NM
)
658 printk(", no media\n");
660 if (pf
->media_status
== PF_RO
)
662 printk(", %llu blocks\n",
663 (unsigned long long)get_capacity(pf
->disk
));
668 /* returns 0, with id set if drive is detected
669 -1, if drive detection failed
671 static int pf_probe(struct pf_unit
*pf
)
673 if (pf
->drive
== -1) {
674 for (pf
->drive
= 0; pf
->drive
<= 1; pf
->drive
++)
677 return pf_identify(pf
);
679 for (pf
->lun
= 0; pf
->lun
< 8; pf
->lun
++)
680 if (!pf_identify(pf
))
687 return pf_identify(pf
);
688 for (pf
->lun
= 0; pf
->lun
< 8; pf
->lun
++)
689 if (!pf_identify(pf
))
695 static int pf_detect(void)
697 struct pf_unit
*pf
= units
;
700 printk("%s: %s version %s, major %d, cluster %d, nice %d\n",
701 name
, name
, PF_VERSION
, major
, cluster
, nice
);
704 if (pf_drive_count
== 0) {
705 if (pi_init(pf
->pi
, 1, -1, -1, -1, -1, -1, pf_scratch
, PI_PF
,
706 verbose
, pf
->name
)) {
707 if (!pf_probe(pf
) && pf
->disk
) {
715 for (unit
= 0; unit
< PF_UNITS
; unit
++, pf
++) {
716 int *conf
= *drives
[unit
];
719 if (pi_init(pf
->pi
, 0, conf
[D_PRT
], conf
[D_MOD
],
720 conf
[D_UNI
], conf
[D_PRO
], conf
[D_DLY
],
721 pf_scratch
, PI_PF
, verbose
, pf
->name
)) {
722 if (pf
->disk
&& !pf_probe(pf
)) {
732 printk("%s: No ATAPI disk detected\n", name
);
733 for (pf
= units
, unit
= 0; unit
< PF_UNITS
; pf
++, unit
++)
738 /* The i/o request engine */
740 static int pf_start(struct pf_unit
*pf
, int cmd
, int b
, int c
)
743 char io_cmd
[12] = { cmd
, pf
->lun
<< 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
745 for (i
= 0; i
< 4; i
++) {
746 io_cmd
[5 - i
] = b
& 0xff;
750 io_cmd
[8] = c
& 0xff;
751 io_cmd
[7] = (c
>> 8) & 0xff;
753 i
= pf_command(pf
, io_cmd
, c
* 512, "start i/o");
760 static int pf_ready(void)
762 return (((status_reg(pf_current
) & (STAT_BUSY
| pf_mask
)) == pf_mask
));
765 static struct request_queue
*pf_queue
;
767 static void pf_end_request(int err
)
769 if (pf_req
&& !__blk_end_request_cur(pf_req
, err
))
773 static void do_pf_request(struct request_queue
* q
)
779 pf_req
= blk_fetch_request(q
);
784 pf_current
= pf_req
->rq_disk
->private_data
;
785 pf_block
= blk_rq_pos(pf_req
);
786 pf_run
= blk_rq_sectors(pf_req
);
787 pf_count
= blk_rq_cur_sectors(pf_req
);
789 if (pf_block
+ pf_count
> get_capacity(pf_req
->rq_disk
)) {
790 pf_end_request(-EIO
);
794 pf_cmd
= rq_data_dir(pf_req
);
795 pf_buf
= pf_req
->buffer
;
800 pi_do_claimed(pf_current
->pi
, do_pf_read
);
801 else if (pf_cmd
== WRITE
)
802 pi_do_claimed(pf_current
->pi
, do_pf_write
);
805 pf_end_request(-EIO
);
810 static int pf_next_buf(void)
812 unsigned long saved_flags
;
821 spin_lock_irqsave(&pf_spin_lock
, saved_flags
);
823 spin_unlock_irqrestore(&pf_spin_lock
, saved_flags
);
826 pf_count
= blk_rq_cur_sectors(pf_req
);
827 pf_buf
= pf_req
->buffer
;
832 static inline void next_request(int err
)
834 unsigned long saved_flags
;
836 spin_lock_irqsave(&pf_spin_lock
, saved_flags
);
839 do_pf_request(pf_queue
);
840 spin_unlock_irqrestore(&pf_spin_lock
, saved_flags
);
843 /* detach from the calling context - in case the spinlock is held */
844 static void do_pf_read(void)
846 ps_set_intr(do_pf_read_start
, NULL
, 0, nice
);
849 static void do_pf_read_start(void)
853 if (pf_start(pf_current
, ATAPI_READ_10
, pf_block
, pf_run
)) {
854 pi_disconnect(pf_current
->pi
);
855 if (pf_retries
< PF_MAX_RETRIES
) {
857 pi_do_claimed(pf_current
->pi
, do_pf_read_start
);
864 ps_set_intr(do_pf_read_drq
, pf_ready
, PF_TMO
, nice
);
867 static void do_pf_read_drq(void)
870 if (pf_wait(pf_current
, STAT_BUSY
, STAT_DRQ
| STAT_ERR
,
871 "read block", "completion") & STAT_ERR
) {
872 pi_disconnect(pf_current
->pi
);
873 if (pf_retries
< PF_MAX_RETRIES
) {
874 pf_req_sense(pf_current
, 0);
876 pi_do_claimed(pf_current
->pi
, do_pf_read_start
);
882 pi_read_block(pf_current
->pi
, pf_buf
, 512);
886 pi_disconnect(pf_current
->pi
);
890 static void do_pf_write(void)
892 ps_set_intr(do_pf_write_start
, NULL
, 0, nice
);
895 static void do_pf_write_start(void)
899 if (pf_start(pf_current
, ATAPI_WRITE_10
, pf_block
, pf_run
)) {
900 pi_disconnect(pf_current
->pi
);
901 if (pf_retries
< PF_MAX_RETRIES
) {
903 pi_do_claimed(pf_current
->pi
, do_pf_write_start
);
911 if (pf_wait(pf_current
, STAT_BUSY
, STAT_DRQ
| STAT_ERR
,
912 "write block", "data wait") & STAT_ERR
) {
913 pi_disconnect(pf_current
->pi
);
914 if (pf_retries
< PF_MAX_RETRIES
) {
916 pi_do_claimed(pf_current
->pi
, do_pf_write_start
);
922 pi_write_block(pf_current
->pi
, pf_buf
, 512);
927 ps_set_intr(do_pf_write_done
, pf_ready
, PF_TMO
, nice
);
930 static void do_pf_write_done(void)
932 if (pf_wait(pf_current
, STAT_BUSY
, 0, "write block", "done") & STAT_ERR
) {
933 pi_disconnect(pf_current
->pi
);
934 if (pf_retries
< PF_MAX_RETRIES
) {
936 pi_do_claimed(pf_current
->pi
, do_pf_write_start
);
942 pi_disconnect(pf_current
->pi
);
946 static int __init
pf_init(void)
947 { /* preliminary initialisation */
960 if (register_blkdev(major
, name
)) {
961 for (pf
= units
, unit
= 0; unit
< PF_UNITS
; pf
++, unit
++)
965 pf_queue
= blk_init_queue(do_pf_request
, &pf_spin_lock
);
967 unregister_blkdev(major
, name
);
968 for (pf
= units
, unit
= 0; unit
< PF_UNITS
; pf
++, unit
++)
973 blk_queue_max_segments(pf_queue
, cluster
);
975 for (pf
= units
, unit
= 0; unit
< PF_UNITS
; pf
++, unit
++) {
976 struct gendisk
*disk
= pf
->disk
;
980 disk
->private_data
= pf
;
981 disk
->queue
= pf_queue
;
987 static void __exit
pf_exit(void)
991 unregister_blkdev(major
, name
);
992 for (pf
= units
, unit
= 0; unit
< PF_UNITS
; pf
++, unit
++) {
995 del_gendisk(pf
->disk
);
999 blk_cleanup_queue(pf_queue
);
1002 MODULE_LICENSE("GPL");
1003 module_init(pf_init
)
1004 module_exit(pf_exit
)