?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge remote-tracking branch 'driver-core/driver-core-next'
[linux-2.6/next.git] / drivers / usb / serial / whiteheat.c
blob5b073bcc807b3a9557c07409cb81b457310fae98
1 /*
2 * USB ConnectTech WhiteHEAT driver
3 *
4 * Copyright (C) 2002
5 * Connect Tech Inc.
6 *
7 * Copyright (C) 1999 - 2001
8 * Greg Kroah-Hartman (greg@kroah.com)
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
14 *
15 * See Documentation/usb/usb-serial.txt for more information on using this
16 * driver
17 *
18 * (10/09/2002) Stuart MacDonald (stuartm@connecttech.com)
19 * Upgrade to full working driver
20 *
21 * (05/30/2001) gkh
22 * switched from using spinlock to a semaphore, which fixes lots of
23 * problems.
24 *
25 * (04/08/2001) gb
26 * Identify version on module load.
27 *
28 * 2001_Mar_19 gkh
29 * Fixed MOD_INC and MOD_DEC logic, the ability to open a port more
30 * than once, and the got the proper usb_device_id table entries so
31 * the driver works again.
32 *
33 * (11/01/2000) Adam J. Richter
34 * usb_device_id table support
35 *
36 * (10/05/2000) gkh
37 * Fixed bug with urb->dev not being set properly, now that the usb
38 * core needs it.
39 *
40 * (10/03/2000) smd
41 * firmware is improved to guard against crap sent to device
42 * firmware now replies CMD_FAILURE on bad things
43 * read_callback fix you provided for private info struct
44 * command_finished now indicates success or fail
45 * setup_port struct now packed to avoid gcc padding
46 * firmware uses 1 based port numbering, driver now handles that
47 *
48 * (09/11/2000) gkh
49 * Removed DEBUG #ifdefs with call to usb_serial_debug_data
50 *
51 * (07/19/2000) gkh
52 * Added module_init and module_exit functions to handle the fact that this
53 * driver is a loadable module now.
54 * Fixed bug with port->minor that was found by Al Borchers
55 *
56 * (07/04/2000) gkh
57 * Added support for port settings. Baud rate can now be changed. Line
58 * signals are not transferred to and from the tty layer yet, but things
59 * seem to be working well now.
60 *
61 * (05/04/2000) gkh
62 * First cut at open and close commands. Data can flow through the ports at
63 * default speeds now.
64 *
65 * (03/26/2000) gkh
66 * Split driver up into device specific pieces.
67 *
68 */
69
70 #include <linux/kernel.h>
71 #include <linux/errno.h>
72 #include <linux/init.h>
73 #include <linux/slab.h>
74 #include <linux/tty.h>
75 #include <linux/tty_driver.h>
76 #include <linux/tty_flip.h>
77 #include <linux/module.h>
78 #include <linux/spinlock.h>
79 #include <linux/mutex.h>
80 #include <linux/uaccess.h>
81 #include <asm/termbits.h>
82 #include <linux/usb.h>
83 #include <linux/serial_reg.h>
84 #include <linux/serial.h>
85 #include <linux/usb/serial.h>
86 #include <linux/firmware.h>
87 #include <linux/ihex.h>
88 #include "whiteheat.h" /* WhiteHEAT specific commands */
89
90 static int debug;
91
92 #ifndef CMSPAR
93 #define CMSPAR 0
94 #endif
95
96 /*
97 * Version Information
98 */
99 #define DRIVER_VERSION "v2.0"
100 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Stuart MacDonald <stuartm@connecttech.com>"
101 #define DRIVER_DESC "USB ConnectTech WhiteHEAT driver"
102
103 #define CONNECT_TECH_VENDOR_ID 0x0710
104 #define CONNECT_TECH_FAKE_WHITE_HEAT_ID 0x0001
105 #define CONNECT_TECH_WHITE_HEAT_ID 0x8001
106
107 /*
108 ID tables for whiteheat are unusual, because we want to different
109 things for different versions of the device. Eventually, this
110 will be doable from a single table. But, for now, we define two
111 separate ID tables, and then a third table that combines them
112 just for the purpose of exporting the autoloading information.
113 */
114 static const struct usb_device_id id_table_std[] = {
115 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
116 { } /* Terminating entry */
117 };
118
119 static const struct usb_device_id id_table_prerenumeration[] = {
120 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
121 { } /* Terminating entry */
122 };
123
124 static const struct usb_device_id id_table_combined[] = {
125 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
126 { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
127 { } /* Terminating entry */
128 };
129
130 MODULE_DEVICE_TABLE(usb, id_table_combined);
131
132 static struct usb_driver whiteheat_driver = {
133 .name = "whiteheat",
134 .probe = usb_serial_probe,
135 .disconnect = usb_serial_disconnect,
136 .id_table = id_table_combined,
137 .no_dynamic_id = 1,
138 };
139
140 /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */
141 static int whiteheat_firmware_download(struct usb_serial *serial,
142 const struct usb_device_id *id);
143 static int whiteheat_firmware_attach(struct usb_serial *serial);
144
145 /* function prototypes for the Connect Tech WhiteHEAT serial converter */
146 static int whiteheat_attach(struct usb_serial *serial);
147 static void whiteheat_release(struct usb_serial *serial);
148 static int whiteheat_open(struct tty_struct *tty,
149 struct usb_serial_port *port);
150 static void whiteheat_close(struct usb_serial_port *port);
151 static int whiteheat_write(struct tty_struct *tty,
152 struct usb_serial_port *port,
153 const unsigned char *buf, int count);
154 static int whiteheat_write_room(struct tty_struct *tty);
155 static int whiteheat_ioctl(struct tty_struct *tty,
156 unsigned int cmd, unsigned long arg);
157 static void whiteheat_set_termios(struct tty_struct *tty,
158 struct usb_serial_port *port, struct ktermios *old);
159 static int whiteheat_tiocmget(struct tty_struct *tty);
160 static int whiteheat_tiocmset(struct tty_struct *tty,
161 unsigned int set, unsigned int clear);
162 static void whiteheat_break_ctl(struct tty_struct *tty, int break_state);
163 static int whiteheat_chars_in_buffer(struct tty_struct *tty);
164 static void whiteheat_throttle(struct tty_struct *tty);
165 static void whiteheat_unthrottle(struct tty_struct *tty);
166 static void whiteheat_read_callback(struct urb *urb);
167 static void whiteheat_write_callback(struct urb *urb);
168
169 static struct usb_serial_driver whiteheat_fake_device = {
170 .driver = {
171 .owner = THIS_MODULE,
172 .name = "whiteheatnofirm",
173 },
174 .description = "Connect Tech - WhiteHEAT - (prerenumeration)",
175 .usb_driver = &whiteheat_driver,
176 .id_table = id_table_prerenumeration,
177 .num_ports = 1,
178 .probe = whiteheat_firmware_download,
179 .attach = whiteheat_firmware_attach,
180 };
181
182 static struct usb_serial_driver whiteheat_device = {
183 .driver = {
184 .owner = THIS_MODULE,
185 .name = "whiteheat",
186 },
187 .description = "Connect Tech - WhiteHEAT",
188 .usb_driver = &whiteheat_driver,
189 .id_table = id_table_std,
190 .num_ports = 4,
191 .attach = whiteheat_attach,
192 .release = whiteheat_release,
193 .open = whiteheat_open,
194 .close = whiteheat_close,
195 .write = whiteheat_write,
196 .write_room = whiteheat_write_room,
197 .ioctl = whiteheat_ioctl,
198 .set_termios = whiteheat_set_termios,
199 .break_ctl = whiteheat_break_ctl,
200 .tiocmget = whiteheat_tiocmget,
201 .tiocmset = whiteheat_tiocmset,
202 .chars_in_buffer = whiteheat_chars_in_buffer,
203 .throttle = whiteheat_throttle,
204 .unthrottle = whiteheat_unthrottle,
205 .read_bulk_callback = whiteheat_read_callback,
206 .write_bulk_callback = whiteheat_write_callback,
207 };
208
209
210 struct whiteheat_command_private {
211 struct mutex mutex;
212 __u8 port_running;
213 __u8 command_finished;
214 wait_queue_head_t wait_command; /* for handling sleeping whilst
215 waiting for a command to
216 finish */
217 __u8 result_buffer[64];
218 };
219
220
221 #define THROTTLED 0x01
222 #define ACTUALLY_THROTTLED 0x02
223
224 static int urb_pool_size = 8;
225
226 struct whiteheat_urb_wrap {
227 struct list_head list;
228 struct urb *urb;
229 };
230
231 struct whiteheat_private {
232 spinlock_t lock;
233 __u8 flags;
234 __u8 mcr; /* FIXME: no locking on mcr */
235 struct list_head rx_urbs_free;
236 struct list_head rx_urbs_submitted;
237 struct list_head rx_urb_q;
238 struct work_struct rx_work;
239 struct usb_serial_port *port;
240 struct list_head tx_urbs_free;
241 struct list_head tx_urbs_submitted;
242 struct mutex deathwarrant;
243 };
244
245
246 /* local function prototypes */
247 static int start_command_port(struct usb_serial *serial);
248 static void stop_command_port(struct usb_serial *serial);
249 static void command_port_write_callback(struct urb *urb);
250 static void command_port_read_callback(struct urb *urb);
251
252 static int start_port_read(struct usb_serial_port *port);
253 static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb,
254 struct list_head *head);
255 static struct list_head *list_first(struct list_head *head);
256 static void rx_data_softint(struct work_struct *work);
257
258 static int firm_send_command(struct usb_serial_port *port, __u8 command,
259 __u8 *data, __u8 datasize);
260 static int firm_open(struct usb_serial_port *port);
261 static int firm_close(struct usb_serial_port *port);
262 static void firm_setup_port(struct tty_struct *tty);
263 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff);
264 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff);
265 static int firm_set_break(struct usb_serial_port *port, __u8 onoff);
266 static int firm_purge(struct usb_serial_port *port, __u8 rxtx);
267 static int firm_get_dtr_rts(struct usb_serial_port *port);
268 static int firm_report_tx_done(struct usb_serial_port *port);
269
270
271 #define COMMAND_PORT 4
272 #define COMMAND_TIMEOUT (2*HZ) /* 2 second timeout for a command */
273 #define COMMAND_TIMEOUT_MS 2000
274 #define CLOSING_DELAY (30 * HZ)
275
276
277 /*****************************************************************************
278 * Connect Tech's White Heat prerenumeration driver functions
279 *****************************************************************************/
280
281 /* steps to download the firmware to the WhiteHEAT device:
282 - hold the reset (by writing to the reset bit of the CPUCS register)
283 - download the VEND_AX.HEX file to the chip using VENDOR_REQUEST-ANCHOR_LOAD
284 - release the reset (by writing to the CPUCS register)
285 - download the WH.HEX file for all addresses greater than 0x1b3f using
286 VENDOR_REQUEST-ANCHOR_EXTERNAL_RAM_LOAD
287 - hold the reset
288 - download the WH.HEX file for all addresses less than 0x1b40 using
289 VENDOR_REQUEST_ANCHOR_LOAD
290 - release the reset
291 - device renumerated itself and comes up as new device id with all
292 firmware download completed.
293 */
294 static int whiteheat_firmware_download(struct usb_serial *serial,
295 const struct usb_device_id *id)
296 {
297 int response, ret = -ENOENT;
298 const struct firmware *loader_fw = NULL, *firmware_fw = NULL;
299 const struct ihex_binrec *record;
300
301 dbg("%s", __func__);
302
303 if (request_ihex_firmware(&firmware_fw, "whiteheat.fw",
304 &serial->dev->dev)) {
305 dev_err(&serial->dev->dev,
306 "%s - request \"whiteheat.fw\" failed\n", __func__);
307 goto out;
308 }
309 if (request_ihex_firmware(&loader_fw, "whiteheat_loader.fw",
310 &serial->dev->dev)) {
311 dev_err(&serial->dev->dev,
312 "%s - request \"whiteheat_loader.fw\" failed\n",
313 __func__);
314 goto out;
315 }
316 ret = 0;
317 response = ezusb_set_reset (serial, 1);
318
319 record = (const struct ihex_binrec *)loader_fw->data;
320 while (record) {
321 response = ezusb_writememory (serial, be32_to_cpu(record->addr),
322 (unsigned char *)record->data,
323 be16_to_cpu(record->len), 0xa0);
324 if (response < 0) {
325 dev_err(&serial->dev->dev, "%s - ezusb_writememory "
326 "failed for loader (%d %04X %p %d)\n",
327 __func__, response, be32_to_cpu(record->addr),
328 record->data, be16_to_cpu(record->len));
329 break;
330 }
331 record = ihex_next_binrec(record);
332 }
333
334 response = ezusb_set_reset(serial, 0);
335
336 record = (const struct ihex_binrec *)firmware_fw->data;
337 while (record && be32_to_cpu(record->addr) < 0x1b40)
338 record = ihex_next_binrec(record);
339 while (record) {
340 response = ezusb_writememory (serial, be32_to_cpu(record->addr),
341 (unsigned char *)record->data,
342 be16_to_cpu(record->len), 0xa3);
343 if (response < 0) {
344 dev_err(&serial->dev->dev, "%s - ezusb_writememory "
345 "failed for first firmware step "
346 "(%d %04X %p %d)\n", __func__, response,
347 be32_to_cpu(record->addr), record->data,
348 be16_to_cpu(record->len));
349 break;
350 }
351 ++record;
352 }
353
354 response = ezusb_set_reset(serial, 1);
355
356 record = (const struct ihex_binrec *)firmware_fw->data;
357 while (record && be32_to_cpu(record->addr) < 0x1b40) {
358 response = ezusb_writememory (serial, be32_to_cpu(record->addr),
359 (unsigned char *)record->data,
360 be16_to_cpu(record->len), 0xa0);
361 if (response < 0) {
362 dev_err(&serial->dev->dev, "%s - ezusb_writememory "
363 "failed for second firmware step "
364 "(%d %04X %p %d)\n", __func__, response,
365 be32_to_cpu(record->addr), record->data,
366 be16_to_cpu(record->len));
367 break;
368 }
369 ++record;
370 }
371 ret = 0;
372 response = ezusb_set_reset (serial, 0);
373 out:
374 release_firmware(loader_fw);
375 release_firmware(firmware_fw);
376 return ret;
377 }
378
379
380 static int whiteheat_firmware_attach(struct usb_serial *serial)
381 {
382 /* We want this device to fail to have a driver assigned to it */
383 return 1;
384 }
385
386
387 /*****************************************************************************
388 * Connect Tech's White Heat serial driver functions
389 *****************************************************************************/
390 static int whiteheat_attach(struct usb_serial *serial)
391 {
392 struct usb_serial_port *command_port;
393 struct whiteheat_command_private *command_info;
394 struct usb_serial_port *port;
395 struct whiteheat_private *info;
396 struct whiteheat_hw_info *hw_info;
397 int pipe;
398 int ret;
399 int alen;
400 __u8 *command;
401 __u8 *result;
402 int i;
403 int j;
404 struct urb *urb;
405 int buf_size;
406 struct whiteheat_urb_wrap *wrap;
407 struct list_head *tmp;
408
409 command_port = serial->port[COMMAND_PORT];
410
411 pipe = usb_sndbulkpipe(serial->dev,
412 command_port->bulk_out_endpointAddress);
413 command = kmalloc(2, GFP_KERNEL);
414 if (!command)
415 goto no_command_buffer;
416 command[0] = WHITEHEAT_GET_HW_INFO;
417 command[1] = 0;
418
419 result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL);
420 if (!result)
421 goto no_result_buffer;
422 /*
423 * When the module is reloaded the firmware is still there and
424 * the endpoints are still in the usb core unchanged. This is the
425 * unlinking bug in disguise. Same for the call below.
426 */
427 usb_clear_halt(serial->dev, pipe);
428 ret = usb_bulk_msg(serial->dev, pipe, command, 2,
429 &alen, COMMAND_TIMEOUT_MS);
430 if (ret) {
431 dev_err(&serial->dev->dev, "%s: Couldn't send command [%d]\n",
432 serial->type->description, ret);
433 goto no_firmware;
434 } else if (alen != 2) {
435 dev_err(&serial->dev->dev, "%s: Send command incomplete [%d]\n",
436 serial->type->description, alen);
437 goto no_firmware;
438 }
439
440 pipe = usb_rcvbulkpipe(serial->dev,
441 command_port->bulk_in_endpointAddress);
442 /* See the comment on the usb_clear_halt() above */
443 usb_clear_halt(serial->dev, pipe);
444 ret = usb_bulk_msg(serial->dev, pipe, result,
445 sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS);
446 if (ret) {
447 dev_err(&serial->dev->dev, "%s: Couldn't get results [%d]\n",
448 serial->type->description, ret);
449 goto no_firmware;
450 } else if (alen != sizeof(*hw_info) + 1) {
451 dev_err(&serial->dev->dev, "%s: Get results incomplete [%d]\n",
452 serial->type->description, alen);
453 goto no_firmware;
454 } else if (result[0] != command[0]) {
455 dev_err(&serial->dev->dev, "%s: Command failed [%d]\n",
456 serial->type->description, result[0]);
457 goto no_firmware;
458 }
459
460 hw_info = (struct whiteheat_hw_info *)&result[1];
461
462 dev_info(&serial->dev->dev, "%s: Driver %s: Firmware v%d.%02d\n",
463 serial->type->description, DRIVER_VERSION,
464 hw_info->sw_major_rev, hw_info->sw_minor_rev);
465
466 for (i = 0; i < serial->num_ports; i++) {
467 port = serial->port[i];
468
469 info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL);
470 if (info == NULL) {
471 dev_err(&port->dev,
472 "%s: Out of memory for port structures\n",
473 serial->type->description);
474 goto no_private;
475 }
476
477 spin_lock_init(&info->lock);
478 mutex_init(&info->deathwarrant);
479 info->flags = 0;
480 info->mcr = 0;
481 INIT_WORK(&info->rx_work, rx_data_softint);
482 info->port = port;
483
484 INIT_LIST_HEAD(&info->rx_urbs_free);
485 INIT_LIST_HEAD(&info->rx_urbs_submitted);
486 INIT_LIST_HEAD(&info->rx_urb_q);
487 INIT_LIST_HEAD(&info->tx_urbs_free);
488 INIT_LIST_HEAD(&info->tx_urbs_submitted);
489
490 for (j = 0; j < urb_pool_size; j++) {
491 urb = usb_alloc_urb(0, GFP_KERNEL);
492 if (!urb) {
493 dev_err(&port->dev, "No free urbs available\n");
494 goto no_rx_urb;
495 }
496 buf_size = port->read_urb->transfer_buffer_length;
497 urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL);
498 if (!urb->transfer_buffer) {
499 dev_err(&port->dev,
500 "Couldn't allocate urb buffer\n");
501 goto no_rx_buf;
502 }
503 wrap = kmalloc(sizeof(*wrap), GFP_KERNEL);
504 if (!wrap) {
505 dev_err(&port->dev,
506 "Couldn't allocate urb wrapper\n");
507 goto no_rx_wrap;
508 }
509 usb_fill_bulk_urb(urb, serial->dev,
510 usb_rcvbulkpipe(serial->dev,
511 port->bulk_in_endpointAddress),
512 urb->transfer_buffer, buf_size,
513 whiteheat_read_callback, port);
514 wrap->urb = urb;
515 list_add(&wrap->list, &info->rx_urbs_free);
516
517 urb = usb_alloc_urb(0, GFP_KERNEL);
518 if (!urb) {
519 dev_err(&port->dev, "No free urbs available\n");
520 goto no_tx_urb;
521 }
522 buf_size = port->write_urb->transfer_buffer_length;
523 urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL);
524 if (!urb->transfer_buffer) {
525 dev_err(&port->dev,
526 "Couldn't allocate urb buffer\n");
527 goto no_tx_buf;
528 }
529 wrap = kmalloc(sizeof(*wrap), GFP_KERNEL);
530 if (!wrap) {
531 dev_err(&port->dev,
532 "Couldn't allocate urb wrapper\n");
533 goto no_tx_wrap;
534 }
535 usb_fill_bulk_urb(urb, serial->dev,
536 usb_sndbulkpipe(serial->dev,
537 port->bulk_out_endpointAddress),
538 urb->transfer_buffer, buf_size,
539 whiteheat_write_callback, port);
540 wrap->urb = urb;
541 list_add(&wrap->list, &info->tx_urbs_free);
542 }
543
544 usb_set_serial_port_data(port, info);
545 }
546
547 command_info = kmalloc(sizeof(struct whiteheat_command_private),
548 GFP_KERNEL);
549 if (command_info == NULL) {
550 dev_err(&serial->dev->dev,
551 "%s: Out of memory for port structures\n",
552 serial->type->description);
553 goto no_command_private;
554 }
555
556 mutex_init(&command_info->mutex);
557 command_info->port_running = 0;
558 init_waitqueue_head(&command_info->wait_command);
559 usb_set_serial_port_data(command_port, command_info);
560 command_port->write_urb->complete = command_port_write_callback;
561 command_port->read_urb->complete = command_port_read_callback;
562 kfree(result);
563 kfree(command);
564
565 return 0;
566
567 no_firmware:
568 /* Firmware likely not running */
569 dev_err(&serial->dev->dev,
570 "%s: Unable to retrieve firmware version, try replugging\n",
571 serial->type->description);
572 dev_err(&serial->dev->dev,
573 "%s: If the firmware is not running (status led not blinking)\n",
574 serial->type->description);
575 dev_err(&serial->dev->dev,
576 "%s: please contact support@connecttech.com\n",
577 serial->type->description);
578 kfree(result);
579 return -ENODEV;
580
581 no_command_private:
582 for (i = serial->num_ports - 1; i >= 0; i--) {
583 port = serial->port[i];
584 info = usb_get_serial_port_data(port);
585 for (j = urb_pool_size - 1; j >= 0; j--) {
586 tmp = list_first(&info->tx_urbs_free);
587 list_del(tmp);
588 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
589 urb = wrap->urb;
590 kfree(wrap);
591 no_tx_wrap:
592 kfree(urb->transfer_buffer);
593 no_tx_buf:
594 usb_free_urb(urb);
595 no_tx_urb:
596 tmp = list_first(&info->rx_urbs_free);
597 list_del(tmp);
598 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
599 urb = wrap->urb;
600 kfree(wrap);
601 no_rx_wrap:
602 kfree(urb->transfer_buffer);
603 no_rx_buf:
604 usb_free_urb(urb);
605 no_rx_urb:
606 ;
607 }
608 kfree(info);
609 no_private:
610 ;
611 }
612 kfree(result);
613 no_result_buffer:
614 kfree(command);
615 no_command_buffer:
616 return -ENOMEM;
617 }
618
619
620 static void whiteheat_release(struct usb_serial *serial)
621 {
622 struct usb_serial_port *command_port;
623 struct usb_serial_port *port;
624 struct whiteheat_private *info;
625 struct whiteheat_urb_wrap *wrap;
626 struct urb *urb;
627 struct list_head *tmp;
628 struct list_head *tmp2;
629 int i;
630
631 dbg("%s", __func__);
632
633 /* free up our private data for our command port */
634 command_port = serial->port[COMMAND_PORT];
635 kfree(usb_get_serial_port_data(command_port));
636
637 for (i = 0; i < serial->num_ports; i++) {
638 port = serial->port[i];
639 info = usb_get_serial_port_data(port);
640 list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) {
641 list_del(tmp);
642 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
643 urb = wrap->urb;
644 kfree(wrap);
645 kfree(urb->transfer_buffer);
646 usb_free_urb(urb);
647 }
648 list_for_each_safe(tmp, tmp2, &info->tx_urbs_free) {
649 list_del(tmp);
650 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
651 urb = wrap->urb;
652 kfree(wrap);
653 kfree(urb->transfer_buffer);
654 usb_free_urb(urb);
655 }
656 kfree(info);
657 }
658 }
659
660 static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port)
661 {
662 int retval = 0;
663
664 dbg("%s - port %d", __func__, port->number);
665
666 retval = start_command_port(port->serial);
667 if (retval)
668 goto exit;
669
670 if (tty)
671 tty->low_latency = 1;
672
673 /* send an open port command */
674 retval = firm_open(port);
675 if (retval) {
676 stop_command_port(port->serial);
677 goto exit;
678 }
679
680 retval = firm_purge(port, WHITEHEAT_PURGE_RX | WHITEHEAT_PURGE_TX);
681 if (retval) {
682 firm_close(port);
683 stop_command_port(port->serial);
684 goto exit;
685 }
686
687 if (tty)
688 firm_setup_port(tty);
689
690 /* Work around HCD bugs */
691 usb_clear_halt(port->serial->dev, port->read_urb->pipe);
692 usb_clear_halt(port->serial->dev, port->write_urb->pipe);
693
694 /* Start reading from the device */
695 retval = start_port_read(port);
696 if (retval) {
697 dev_err(&port->dev,
698 "%s - failed submitting read urb, error %d\n",
699 __func__, retval);
700 firm_close(port);
701 stop_command_port(port->serial);
702 goto exit;
703 }
704
705 exit:
706 dbg("%s - exit, retval = %d", __func__, retval);
707 return retval;
708 }
709
710
711 static void whiteheat_close(struct usb_serial_port *port)
712 {
713 struct whiteheat_private *info = usb_get_serial_port_data(port);
714 struct whiteheat_urb_wrap *wrap;
715 struct urb *urb;
716 struct list_head *tmp;
717 struct list_head *tmp2;
718
719 dbg("%s - port %d", __func__, port->number);
720
721 firm_report_tx_done(port);
722 firm_close(port);
723
724 /* shutdown our bulk reads and writes */
725 mutex_lock(&info->deathwarrant);
726 spin_lock_irq(&info->lock);
727 list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) {
728 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
729 urb = wrap->urb;
730 list_del(tmp);
731 spin_unlock_irq(&info->lock);
732 usb_kill_urb(urb);
733 spin_lock_irq(&info->lock);
734 list_add(tmp, &info->rx_urbs_free);
735 }
736 list_for_each_safe(tmp, tmp2, &info->rx_urb_q)
737 list_move(tmp, &info->rx_urbs_free);
738 list_for_each_safe(tmp, tmp2, &info->tx_urbs_submitted) {
739 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
740 urb = wrap->urb;
741 list_del(tmp);
742 spin_unlock_irq(&info->lock);
743 usb_kill_urb(urb);
744 spin_lock_irq(&info->lock);
745 list_add(tmp, &info->tx_urbs_free);
746 }
747 spin_unlock_irq(&info->lock);
748 mutex_unlock(&info->deathwarrant);
749 stop_command_port(port->serial);
750 }
751
752
753 static int whiteheat_write(struct tty_struct *tty,
754 struct usb_serial_port *port, const unsigned char *buf, int count)
755 {
756 struct usb_serial *serial = port->serial;
757 struct whiteheat_private *info = usb_get_serial_port_data(port);
758 struct whiteheat_urb_wrap *wrap;
759 struct urb *urb;
760 int result;
761 int bytes;
762 int sent = 0;
763 unsigned long flags;
764 struct list_head *tmp;
765
766 dbg("%s - port %d", __func__, port->number);
767
768 if (count == 0) {
769 dbg("%s - write request of 0 bytes", __func__);
770 return (0);
771 }
772
773 while (count) {
774 spin_lock_irqsave(&info->lock, flags);
775 if (list_empty(&info->tx_urbs_free)) {
776 spin_unlock_irqrestore(&info->lock, flags);
777 break;
778 }
779 tmp = list_first(&info->tx_urbs_free);
780 list_del(tmp);
781 spin_unlock_irqrestore(&info->lock, flags);
782
783 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
784 urb = wrap->urb;
785 bytes = (count > port->bulk_out_size) ?
786 port->bulk_out_size : count;
787 memcpy(urb->transfer_buffer, buf + sent, bytes);
788
789 usb_serial_debug_data(debug, &port->dev,
790 __func__, bytes, urb->transfer_buffer);
791
792 urb->dev = serial->dev;
793 urb->transfer_buffer_length = bytes;
794 result = usb_submit_urb(urb, GFP_ATOMIC);
795 if (result) {
796 dev_err(&port->dev,
797 "%s - failed submitting write urb, error %d\n",
798 __func__, result);
799 sent = result;
800 spin_lock_irqsave(&info->lock, flags);
801 list_add(tmp, &info->tx_urbs_free);
802 spin_unlock_irqrestore(&info->lock, flags);
803 break;
804 } else {
805 sent += bytes;
806 count -= bytes;
807 spin_lock_irqsave(&info->lock, flags);
808 list_add(tmp, &info->tx_urbs_submitted);
809 spin_unlock_irqrestore(&info->lock, flags);
810 }
811 }
812
813 return sent;
814 }
815
816 static int whiteheat_write_room(struct tty_struct *tty)
817 {
818 struct usb_serial_port *port = tty->driver_data;
819 struct whiteheat_private *info = usb_get_serial_port_data(port);
820 struct list_head *tmp;
821 int room = 0;
822 unsigned long flags;
823
824 dbg("%s - port %d", __func__, port->number);
825
826 spin_lock_irqsave(&info->lock, flags);
827 list_for_each(tmp, &info->tx_urbs_free)
828 room++;
829 spin_unlock_irqrestore(&info->lock, flags);
830 room *= port->bulk_out_size;
831
832 dbg("%s - returns %d", __func__, room);
833 return (room);
834 }
835
836 static int whiteheat_tiocmget(struct tty_struct *tty)
837 {
838 struct usb_serial_port *port = tty->driver_data;
839 struct whiteheat_private *info = usb_get_serial_port_data(port);
840 unsigned int modem_signals = 0;
841
842 dbg("%s - port %d", __func__, port->number);
843
844 firm_get_dtr_rts(port);
845 if (info->mcr & UART_MCR_DTR)
846 modem_signals |= TIOCM_DTR;
847 if (info->mcr & UART_MCR_RTS)
848 modem_signals |= TIOCM_RTS;
849
850 return modem_signals;
851 }
852
853 static int whiteheat_tiocmset(struct tty_struct *tty,
854 unsigned int set, unsigned int clear)
855 {
856 struct usb_serial_port *port = tty->driver_data;
857 struct whiteheat_private *info = usb_get_serial_port_data(port);
858
859 dbg("%s - port %d", __func__, port->number);
860
861 if (set & TIOCM_RTS)
862 info->mcr |= UART_MCR_RTS;
863 if (set & TIOCM_DTR)
864 info->mcr |= UART_MCR_DTR;
865
866 if (clear & TIOCM_RTS)
867 info->mcr &= ~UART_MCR_RTS;
868 if (clear & TIOCM_DTR)
869 info->mcr &= ~UART_MCR_DTR;
870
871 firm_set_dtr(port, info->mcr & UART_MCR_DTR);
872 firm_set_rts(port, info->mcr & UART_MCR_RTS);
873 return 0;
874 }
875
876
877 static int whiteheat_ioctl(struct tty_struct *tty,
878 unsigned int cmd, unsigned long arg)
879 {
880 struct usb_serial_port *port = tty->driver_data;
881 struct serial_struct serstruct;
882 void __user *user_arg = (void __user *)arg;
883
884 dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
885
886 switch (cmd) {
887 case TIOCGSERIAL:
888 memset(&serstruct, 0, sizeof(serstruct));
889 serstruct.type = PORT_16654;
890 serstruct.line = port->serial->minor;
891 serstruct.port = port->number;
892 serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
893 serstruct.xmit_fifo_size = port->bulk_out_size;
894 serstruct.custom_divisor = 0;
895 serstruct.baud_base = 460800;
896 serstruct.close_delay = CLOSING_DELAY;
897 serstruct.closing_wait = CLOSING_DELAY;
898
899 if (copy_to_user(user_arg, &serstruct, sizeof(serstruct)))
900 return -EFAULT;
901 break;
902 default:
903 break;
904 }
905
906 return -ENOIOCTLCMD;
907 }
908
909
910 static void whiteheat_set_termios(struct tty_struct *tty,
911 struct usb_serial_port *port, struct ktermios *old_termios)
912 {
913 firm_setup_port(tty);
914 }
915
916 static void whiteheat_break_ctl(struct tty_struct *tty, int break_state)
917 {
918 struct usb_serial_port *port = tty->driver_data;
919 firm_set_break(port, break_state);
920 }
921
922
923 static int whiteheat_chars_in_buffer(struct tty_struct *tty)
924 {
925 struct usb_serial_port *port = tty->driver_data;
926 struct whiteheat_private *info = usb_get_serial_port_data(port);
927 struct list_head *tmp;
928 struct whiteheat_urb_wrap *wrap;
929 int chars = 0;
930 unsigned long flags;
931
932 dbg("%s - port %d", __func__, port->number);
933
934 spin_lock_irqsave(&info->lock, flags);
935 list_for_each(tmp, &info->tx_urbs_submitted) {
936 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
937 chars += wrap->urb->transfer_buffer_length;
938 }
939 spin_unlock_irqrestore(&info->lock, flags);
940
941 dbg("%s - returns %d", __func__, chars);
942 return chars;
943 }
944
945
946 static void whiteheat_throttle(struct tty_struct *tty)
947 {
948 struct usb_serial_port *port = tty->driver_data;
949 struct whiteheat_private *info = usb_get_serial_port_data(port);
950
951 dbg("%s - port %d", __func__, port->number);
952
953 spin_lock_irq(&info->lock);
954 info->flags |= THROTTLED;
955 spin_unlock_irq(&info->lock);
956 }
957
958
959 static void whiteheat_unthrottle(struct tty_struct *tty)
960 {
961 struct usb_serial_port *port = tty->driver_data;
962 struct whiteheat_private *info = usb_get_serial_port_data(port);
963 int actually_throttled;
964
965 dbg("%s - port %d", __func__, port->number);
966
967 spin_lock_irq(&info->lock);
968 actually_throttled = info->flags & ACTUALLY_THROTTLED;
969 info->flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
970 spin_unlock_irq(&info->lock);
971
972 if (actually_throttled)
973 rx_data_softint(&info->rx_work);
974 }
975
976
977 /*****************************************************************************
978 * Connect Tech's White Heat callback routines
979 *****************************************************************************/
980 static void command_port_write_callback(struct urb *urb)
981 {
982 int status = urb->status;
983
984 dbg("%s", __func__);
985
986 if (status) {
987 dbg("nonzero urb status: %d", status);
988 return;
989 }
990 }
991
992
993 static void command_port_read_callback(struct urb *urb)
994 {
995 struct usb_serial_port *command_port = urb->context;
996 struct whiteheat_command_private *command_info;
997 int status = urb->status;
998 unsigned char *data = urb->transfer_buffer;
999 int result;
1000
1001 dbg("%s", __func__);
1002
1003 command_info = usb_get_serial_port_data(command_port);
1004 if (!command_info) {
1005 dbg("%s - command_info is NULL, exiting.", __func__);
1006 return;
1007 }
1008 if (status) {
1009 dbg("%s - nonzero urb status: %d", __func__, status);
1010 if (status != -ENOENT)
1011 command_info->command_finished = WHITEHEAT_CMD_FAILURE;
1012 wake_up(&command_info->wait_command);
1013 return;
1014 }
1015
1016 usb_serial_debug_data(debug, &command_port->dev,
1017 __func__, urb->actual_length, data);
1018
1019 if (data[0] == WHITEHEAT_CMD_COMPLETE) {
1020 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
1021 wake_up(&command_info->wait_command);
1022 } else if (data[0] == WHITEHEAT_CMD_FAILURE) {
1023 command_info->command_finished = WHITEHEAT_CMD_FAILURE;
1024 wake_up(&command_info->wait_command);
1025 } else if (data[0] == WHITEHEAT_EVENT) {
1026 /* These are unsolicited reports from the firmware, hence no
1027 waiting command to wakeup */
1028 dbg("%s - event received", __func__);
1029 } else if (data[0] == WHITEHEAT_GET_DTR_RTS) {
1030 memcpy(command_info->result_buffer, &data[1],
1031 urb->actual_length - 1);
1032 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
1033 wake_up(&command_info->wait_command);
1034 } else
1035 dbg("%s - bad reply from firmware", __func__);
1036
1037 /* Continue trying to always read */
1038 command_port->read_urb->dev = command_port->serial->dev;
1039 result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC);
1040 if (result)
1041 dbg("%s - failed resubmitting read urb, error %d",
1042 __func__, result);
1043 }
1044
1045
1046 static void whiteheat_read_callback(struct urb *urb)
1047 {
1048 struct usb_serial_port *port = urb->context;
1049 struct whiteheat_urb_wrap *wrap;
1050 unsigned char *data = urb->transfer_buffer;
1051 struct whiteheat_private *info = usb_get_serial_port_data(port);
1052 int status = urb->status;
1053
1054 dbg("%s - port %d", __func__, port->number);
1055
1056 spin_lock(&info->lock);
1057 wrap = urb_to_wrap(urb, &info->rx_urbs_submitted);
1058 if (!wrap) {
1059 spin_unlock(&info->lock);
1060 dev_err(&port->dev, "%s - Not my urb!\n", __func__);
1061 return;
1062 }
1063 list_del(&wrap->list);
1064 spin_unlock(&info->lock);
1065
1066 if (status) {
1067 dbg("%s - nonzero read bulk status received: %d",
1068 __func__, status);
1069 spin_lock(&info->lock);
1070 list_add(&wrap->list, &info->rx_urbs_free);
1071 spin_unlock(&info->lock);
1072 return;
1073 }
1074
1075 usb_serial_debug_data(debug, &port->dev,
1076 __func__, urb->actual_length, data);
1077
1078 spin_lock(&info->lock);
1079 list_add_tail(&wrap->list, &info->rx_urb_q);
1080 if (info->flags & THROTTLED) {
1081 info->flags |= ACTUALLY_THROTTLED;
1082 spin_unlock(&info->lock);
1083 return;
1084 }
1085 spin_unlock(&info->lock);
1086
1087 schedule_work(&info->rx_work);
1088 }
1089
1090
1091 static void whiteheat_write_callback(struct urb *urb)
1092 {
1093 struct usb_serial_port *port = urb->context;
1094 struct whiteheat_private *info = usb_get_serial_port_data(port);
1095 struct whiteheat_urb_wrap *wrap;
1096 int status = urb->status;
1097
1098 dbg("%s - port %d", __func__, port->number);
1099
1100 spin_lock(&info->lock);
1101 wrap = urb_to_wrap(urb, &info->tx_urbs_submitted);
1102 if (!wrap) {
1103 spin_unlock(&info->lock);
1104 dev_err(&port->dev, "%s - Not my urb!\n", __func__);
1105 return;
1106 }
1107 list_move(&wrap->list, &info->tx_urbs_free);
1108 spin_unlock(&info->lock);
1109
1110 if (status) {
1111 dbg("%s - nonzero write bulk status received: %d",
1112 __func__, status);
1113 return;
1114 }
1115
1116 usb_serial_port_softint(port);
1117 }
1118
1119
1120 /*****************************************************************************
1121 * Connect Tech's White Heat firmware interface
1122 *****************************************************************************/
1123 static int firm_send_command(struct usb_serial_port *port, __u8 command,
1124 __u8 *data, __u8 datasize)
1125 {
1126 struct usb_serial_port *command_port;
1127 struct whiteheat_command_private *command_info;
1128 struct whiteheat_private *info;
1129 __u8 *transfer_buffer;
1130 int retval = 0;
1131 int t;
1132
1133 dbg("%s - command %d", __func__, command);
1134
1135 command_port = port->serial->port[COMMAND_PORT];
1136 command_info = usb_get_serial_port_data(command_port);
1137 mutex_lock(&command_info->mutex);
1138 command_info->command_finished = false;
1139
1140 transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer;
1141 transfer_buffer[0] = command;
1142 memcpy(&transfer_buffer[1], data, datasize);
1143 command_port->write_urb->transfer_buffer_length = datasize + 1;
1144 command_port->write_urb->dev = port->serial->dev;
1145 retval = usb_submit_urb(command_port->write_urb, GFP_NOIO);
1146 if (retval) {
1147 dbg("%s - submit urb failed", __func__);
1148 goto exit;
1149 }
1150
1151 /* wait for the command to complete */
1152 t = wait_event_timeout(command_info->wait_command,
1153 (bool)command_info->command_finished, COMMAND_TIMEOUT);
1154 if (!t)
1155 usb_kill_urb(command_port->write_urb);
1156
1157 if (command_info->command_finished == false) {
1158 dbg("%s - command timed out.", __func__);
1159 retval = -ETIMEDOUT;
1160 goto exit;
1161 }
1162
1163 if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) {
1164 dbg("%s - command failed.", __func__);
1165 retval = -EIO;
1166 goto exit;
1167 }
1168
1169 if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) {
1170 dbg("%s - command completed.", __func__);
1171 switch (command) {
1172 case WHITEHEAT_GET_DTR_RTS:
1173 info = usb_get_serial_port_data(port);
1174 memcpy(&info->mcr, command_info->result_buffer,
1175 sizeof(struct whiteheat_dr_info));
1176 break;
1177 }
1178 }
1179 exit:
1180 mutex_unlock(&command_info->mutex);
1181 return retval;
1182 }
1183
1184
1185 static int firm_open(struct usb_serial_port *port)
1186 {
1187 struct whiteheat_simple open_command;
1188
1189 open_command.port = port->number - port->serial->minor + 1;
1190 return firm_send_command(port, WHITEHEAT_OPEN,
1191 (__u8 *)&open_command, sizeof(open_command));
1192 }
1193
1194
1195 static int firm_close(struct usb_serial_port *port)
1196 {
1197 struct whiteheat_simple close_command;
1198
1199 close_command.port = port->number - port->serial->minor + 1;
1200 return firm_send_command(port, WHITEHEAT_CLOSE,
1201 (__u8 *)&close_command, sizeof(close_command));
1202 }
1203
1204
1205 static void firm_setup_port(struct tty_struct *tty)
1206 {
1207 struct usb_serial_port *port = tty->driver_data;
1208 struct whiteheat_port_settings port_settings;
1209 unsigned int cflag = tty->termios->c_cflag;
1210
1211 port_settings.port = port->number + 1;
1212
1213 /* get the byte size */
1214 switch (cflag & CSIZE) {
1215 case CS5: port_settings.bits = 5; break;
1216 case CS6: port_settings.bits = 6; break;
1217 case CS7: port_settings.bits = 7; break;
1218 default:
1219 case CS8: port_settings.bits = 8; break;
1220 }
1221 dbg("%s - data bits = %d", __func__, port_settings.bits);
1222
1223 /* determine the parity */
1224 if (cflag & PARENB)
1225 if (cflag & CMSPAR)
1226 if (cflag & PARODD)
1227 port_settings.parity = WHITEHEAT_PAR_MARK;
1228 else
1229 port_settings.parity = WHITEHEAT_PAR_SPACE;
1230 else
1231 if (cflag & PARODD)
1232 port_settings.parity = WHITEHEAT_PAR_ODD;
1233 else
1234 port_settings.parity = WHITEHEAT_PAR_EVEN;
1235 else
1236 port_settings.parity = WHITEHEAT_PAR_NONE;
1237 dbg("%s - parity = %c", __func__, port_settings.parity);
1238
1239 /* figure out the stop bits requested */
1240 if (cflag & CSTOPB)
1241 port_settings.stop = 2;
1242 else
1243 port_settings.stop = 1;
1244 dbg("%s - stop bits = %d", __func__, port_settings.stop);
1245
1246 /* figure out the flow control settings */
1247 if (cflag & CRTSCTS)
1248 port_settings.hflow = (WHITEHEAT_HFLOW_CTS |
1249 WHITEHEAT_HFLOW_RTS);
1250 else
1251 port_settings.hflow = WHITEHEAT_HFLOW_NONE;
1252 dbg("%s - hardware flow control = %s %s %s %s", __func__,
1253 (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "",
1254 (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "",
1255 (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "",
1256 (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : "");
1257
1258 /* determine software flow control */
1259 if (I_IXOFF(tty))
1260 port_settings.sflow = WHITEHEAT_SFLOW_RXTX;
1261 else
1262 port_settings.sflow = WHITEHEAT_SFLOW_NONE;
1263 dbg("%s - software flow control = %c", __func__, port_settings.sflow);
1264
1265 port_settings.xon = START_CHAR(tty);
1266 port_settings.xoff = STOP_CHAR(tty);
1267 dbg("%s - XON = %2x, XOFF = %2x",
1268 __func__, port_settings.xon, port_settings.xoff);
1269
1270 /* get the baud rate wanted */
1271 port_settings.baud = tty_get_baud_rate(tty);
1272 dbg("%s - baud rate = %d", __func__, port_settings.baud);
1273
1274 /* fixme: should set validated settings */
1275 tty_encode_baud_rate(tty, port_settings.baud, port_settings.baud);
1276 /* handle any settings that aren't specified in the tty structure */
1277 port_settings.lloop = 0;
1278
1279 /* now send the message to the device */
1280 firm_send_command(port, WHITEHEAT_SETUP_PORT,
1281 (__u8 *)&port_settings, sizeof(port_settings));
1282 }
1283
1284
1285 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff)
1286 {
1287 struct whiteheat_set_rdb rts_command;
1288
1289 rts_command.port = port->number - port->serial->minor + 1;
1290 rts_command.state = onoff;
1291 return firm_send_command(port, WHITEHEAT_SET_RTS,
1292 (__u8 *)&rts_command, sizeof(rts_command));
1293 }
1294
1295
1296 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff)
1297 {
1298 struct whiteheat_set_rdb dtr_command;
1299
1300 dtr_command.port = port->number - port->serial->minor + 1;
1301 dtr_command.state = onoff;
1302 return firm_send_command(port, WHITEHEAT_SET_DTR,
1303 (__u8 *)&dtr_command, sizeof(dtr_command));
1304 }
1305
1306
1307 static int firm_set_break(struct usb_serial_port *port, __u8 onoff)
1308 {
1309 struct whiteheat_set_rdb break_command;
1310
1311 break_command.port = port->number - port->serial->minor + 1;
1312 break_command.state = onoff;
1313 return firm_send_command(port, WHITEHEAT_SET_BREAK,
1314 (__u8 *)&break_command, sizeof(break_command));
1315 }
1316
1317
1318 static int firm_purge(struct usb_serial_port *port, __u8 rxtx)
1319 {
1320 struct whiteheat_purge purge_command;
1321
1322 purge_command.port = port->number - port->serial->minor + 1;
1323 purge_command.what = rxtx;
1324 return firm_send_command(port, WHITEHEAT_PURGE,
1325 (__u8 *)&purge_command, sizeof(purge_command));
1326 }
1327
1328
1329 static int firm_get_dtr_rts(struct usb_serial_port *port)
1330 {
1331 struct whiteheat_simple get_dr_command;
1332
1333 get_dr_command.port = port->number - port->serial->minor + 1;
1334 return firm_send_command(port, WHITEHEAT_GET_DTR_RTS,
1335 (__u8 *)&get_dr_command, sizeof(get_dr_command));
1336 }
1337
1338
1339 static int firm_report_tx_done(struct usb_serial_port *port)
1340 {
1341 struct whiteheat_simple close_command;
1342
1343 close_command.port = port->number - port->serial->minor + 1;
1344 return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE,
1345 (__u8 *)&close_command, sizeof(close_command));
1346 }
1347
1348
1349 /*****************************************************************************
1350 * Connect Tech's White Heat utility functions
1351 *****************************************************************************/
1352 static int start_command_port(struct usb_serial *serial)
1353 {
1354 struct usb_serial_port *command_port;
1355 struct whiteheat_command_private *command_info;
1356 int retval = 0;
1357
1358 command_port = serial->port[COMMAND_PORT];
1359 command_info = usb_get_serial_port_data(command_port);
1360 mutex_lock(&command_info->mutex);
1361 if (!command_info->port_running) {
1362 /* Work around HCD bugs */
1363 usb_clear_halt(serial->dev, command_port->read_urb->pipe);
1364
1365 command_port->read_urb->dev = serial->dev;
1366 retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL);
1367 if (retval) {
1368 dev_err(&serial->dev->dev,
1369 "%s - failed submitting read urb, error %d\n",
1370 __func__, retval);
1371 goto exit;
1372 }
1373 }
1374 command_info->port_running++;
1375
1376 exit:
1377 mutex_unlock(&command_info->mutex);
1378 return retval;
1379 }
1380
1381
1382 static void stop_command_port(struct usb_serial *serial)
1383 {
1384 struct usb_serial_port *command_port;
1385 struct whiteheat_command_private *command_info;
1386
1387 command_port = serial->port[COMMAND_PORT];
1388 command_info = usb_get_serial_port_data(command_port);
1389 mutex_lock(&command_info->mutex);
1390 command_info->port_running--;
1391 if (!command_info->port_running)
1392 usb_kill_urb(command_port->read_urb);
1393 mutex_unlock(&command_info->mutex);
1394 }
1395
1396
1397 static int start_port_read(struct usb_serial_port *port)
1398 {
1399 struct whiteheat_private *info = usb_get_serial_port_data(port);
1400 struct whiteheat_urb_wrap *wrap;
1401 struct urb *urb;
1402 int retval = 0;
1403 unsigned long flags;
1404 struct list_head *tmp;
1405 struct list_head *tmp2;
1406
1407 spin_lock_irqsave(&info->lock, flags);
1408
1409 list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) {
1410 list_del(tmp);
1411 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1412 urb = wrap->urb;
1413 urb->dev = port->serial->dev;
1414 spin_unlock_irqrestore(&info->lock, flags);
1415 retval = usb_submit_urb(urb, GFP_KERNEL);
1416 if (retval) {
1417 spin_lock_irqsave(&info->lock, flags);
1418 list_add(tmp, &info->rx_urbs_free);
1419 list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) {
1420 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1421 urb = wrap->urb;
1422 list_del(tmp);
1423 spin_unlock_irqrestore(&info->lock, flags);
1424 usb_kill_urb(urb);
1425 spin_lock_irqsave(&info->lock, flags);
1426 list_add(tmp, &info->rx_urbs_free);
1427 }
1428 break;
1429 }
1430 spin_lock_irqsave(&info->lock, flags);
1431 list_add(tmp, &info->rx_urbs_submitted);
1432 }
1433
1434 spin_unlock_irqrestore(&info->lock, flags);
1435
1436 return retval;
1437 }
1438
1439
1440 static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb,
1441 struct list_head *head)
1442 {
1443 struct whiteheat_urb_wrap *wrap;
1444 struct list_head *tmp;
1445
1446 list_for_each(tmp, head) {
1447 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1448 if (wrap->urb == urb)
1449 return wrap;
1450 }
1451
1452 return NULL;
1453 }
1454
1455
1456 static struct list_head *list_first(struct list_head *head)
1457 {
1458 return head->next;
1459 }
1460
1461
1462 static void rx_data_softint(struct work_struct *work)
1463 {
1464 struct whiteheat_private *info =
1465 container_of(work, struct whiteheat_private, rx_work);
1466 struct usb_serial_port *port = info->port;
1467 struct tty_struct *tty = tty_port_tty_get(&port->port);
1468 struct whiteheat_urb_wrap *wrap;
1469 struct urb *urb;
1470 unsigned long flags;
1471 struct list_head *tmp;
1472 struct list_head *tmp2;
1473 int result;
1474 int sent = 0;
1475
1476 spin_lock_irqsave(&info->lock, flags);
1477 if (info->flags & THROTTLED) {
1478 spin_unlock_irqrestore(&info->lock, flags);
1479 goto out;
1480 }
1481
1482 list_for_each_safe(tmp, tmp2, &info->rx_urb_q) {
1483 list_del(tmp);
1484 spin_unlock_irqrestore(&info->lock, flags);
1485
1486 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1487 urb = wrap->urb;
1488
1489 if (tty && urb->actual_length)
1490 sent += tty_insert_flip_string(tty,
1491 urb->transfer_buffer, urb->actual_length);
1492
1493 urb->dev = port->serial->dev;
1494 result = usb_submit_urb(urb, GFP_ATOMIC);
1495 if (result) {
1496 dev_err(&port->dev,
1497 "%s - failed resubmitting read urb, error %d\n",
1498 __func__, result);
1499 spin_lock_irqsave(&info->lock, flags);
1500 list_add(tmp, &info->rx_urbs_free);
1501 continue;
1502 }
1503
1504 spin_lock_irqsave(&info->lock, flags);
1505 list_add(tmp, &info->rx_urbs_submitted);
1506 }
1507 spin_unlock_irqrestore(&info->lock, flags);
1508
1509 if (sent)
1510 tty_flip_buffer_push(tty);
1511 out:
1512 tty_kref_put(tty);
1513 }
1514
1515
1516 /*****************************************************************************
1517 * Connect Tech's White Heat module functions
1518 *****************************************************************************/
1519 static int __init whiteheat_init(void)
1520 {
1521 int retval;
1522 retval = usb_serial_register(&whiteheat_fake_device);
1523 if (retval)
1524 goto failed_fake_register;
1525 retval = usb_serial_register(&whiteheat_device);
1526 if (retval)
1527 goto failed_device_register;
1528 retval = usb_register(&whiteheat_driver);
1529 if (retval)
1530 goto failed_usb_register;
1531 printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
1532 DRIVER_DESC "\n");
1533 return 0;
1534 failed_usb_register:
1535 usb_serial_deregister(&whiteheat_device);
1536 failed_device_register:
1537 usb_serial_deregister(&whiteheat_fake_device);
1538 failed_fake_register:
1539 return retval;
1540 }
1541
1542
1543 static void __exit whiteheat_exit(void)
1544 {
1545 usb_deregister(&whiteheat_driver);
1546 usb_serial_deregister(&whiteheat_fake_device);
1547 usb_serial_deregister(&whiteheat_device);
1548 }
1549
1550
1551 module_init(whiteheat_init);
1552 module_exit(whiteheat_exit);
1553
1554 MODULE_AUTHOR(DRIVER_AUTHOR);
1555 MODULE_DESCRIPTION(DRIVER_DESC);
1556 MODULE_LICENSE("GPL");
1557
1558 MODULE_FIRMWARE("whiteheat.fw");
1559 MODULE_FIRMWARE("whiteheat_loader.fw");
1560
1561 module_param(urb_pool_size, int, 0);
1562 MODULE_PARM_DESC(urb_pool_size, "Number of urbs to use for buffering");
1563
1564 module_param(debug, bool, S_IRUGO | S_IWUSR);
1565 MODULE_PARM_DESC(debug, "Debug enabled or not");
linux-next