include/scsi/scsi.h

   1 /*
   2  * This header file contains public constants and structures used by
   3  * the scsi code for linux.
   4  *
   5  * For documentation on the OPCODES, MESSAGES, and SENSE values,
   6  * please consult the SCSI standard.
   7  */
   8 #ifndef _SCSI_SCSI_H
   9 #define _SCSI_SCSI_H
  10
  11 #include <linux/types.h>
  12
  13 /*
  14  *      SCSI command lengths
  15  */
  16
  17 extern const unsigned char scsi_command_size[8];
  18 #define COMMAND_SIZE(opcode) scsi_command_size[((opcode) >> 5) & 7]
  19
  20 /*
  21  * Special value for scanning to specify scanning or rescanning of all
  22  * possible channels, (target) ids, or luns on a given shost.
  23  */
  24 #define SCAN_WILD_CARD  ~0
  25
  26 /*
  27  *      SCSI opcodes
  28  */
  29
  30 #define TEST_UNIT_READY       0x00
  31 #define REZERO_UNIT           0x01
  32 #define REQUEST_SENSE         0x03
  33 #define FORMAT_UNIT           0x04
  34 #define READ_BLOCK_LIMITS     0x05
  35 #define REASSIGN_BLOCKS       0x07
  36 #define INITIALIZE_ELEMENT_STATUS 0x07
  37 #define READ_6                0x08
  38 #define WRITE_6               0x0a
  39 #define SEEK_6                0x0b
  40 #define READ_REVERSE          0x0f
  41 #define WRITE_FILEMARKS       0x10
  42 #define SPACE                 0x11
  43 #define INQUIRY               0x12
  44 #define RECOVER_BUFFERED_DATA 0x14
  45 #define MODE_SELECT           0x15
  46 #define RESERVE               0x16
  47 #define RELEASE               0x17
  48 #define COPY                  0x18
  49 #define ERASE                 0x19
  50 #define MODE_SENSE            0x1a
  51 #define START_STOP            0x1b
  52 #define RECEIVE_DIAGNOSTIC    0x1c
  53 #define SEND_DIAGNOSTIC       0x1d
  54 #define ALLOW_MEDIUM_REMOVAL  0x1e
  55
  56 #define SET_WINDOW            0x24
  57 #define READ_CAPACITY         0x25
  58 #define READ_10               0x28
  59 #define WRITE_10              0x2a
  60 #define SEEK_10               0x2b
  61 #define POSITION_TO_ELEMENT   0x2b
  62 #define WRITE_VERIFY          0x2e
  63 #define VERIFY                0x2f
  64 #define SEARCH_HIGH           0x30
  65 #define SEARCH_EQUAL          0x31
  66 #define SEARCH_LOW            0x32
  67 #define SET_LIMITS            0x33
  68 #define PRE_FETCH             0x34
  69 #define READ_POSITION         0x34
  70 #define SYNCHRONIZE_CACHE     0x35
  71 #define LOCK_UNLOCK_CACHE     0x36
  72 #define READ_DEFECT_DATA      0x37
  73 #define MEDIUM_SCAN           0x38
  74 #define COMPARE               0x39
  75 #define COPY_VERIFY           0x3a
  76 #define WRITE_BUFFER          0x3b
  77 #define READ_BUFFER           0x3c
  78 #define UPDATE_BLOCK          0x3d
  79 #define READ_LONG             0x3e
  80 #define WRITE_LONG            0x3f
  81 #define CHANGE_DEFINITION     0x40
  82 #define WRITE_SAME            0x41
  83 #define READ_TOC              0x43
  84 #define LOG_SELECT            0x4c
  85 #define LOG_SENSE             0x4d
  86 #define MODE_SELECT_10        0x55
  87 #define RESERVE_10            0x56
  88 #define RELEASE_10            0x57
  89 #define MODE_SENSE_10         0x5a
  90 #define PERSISTENT_RESERVE_IN 0x5e
  91 #define PERSISTENT_RESERVE_OUT 0x5f
  92 #define REPORT_LUNS           0xa0
  93 #define MAINTENANCE_IN        0xa3
  94 #define MOVE_MEDIUM           0xa5
  95 #define EXCHANGE_MEDIUM       0xa6
  96 #define READ_12               0xa8
  97 #define WRITE_12              0xaa
  98 #define WRITE_VERIFY_12       0xae
  99 #define SEARCH_HIGH_12        0xb0
 100 #define SEARCH_EQUAL_12       0xb1
 101 #define SEARCH_LOW_12         0xb2
 102 #define READ_ELEMENT_STATUS   0xb8
 103 #define SEND_VOLUME_TAG       0xb6
 104 #define WRITE_LONG_2          0xea
 105 #define READ_16               0x88
 106 #define WRITE_16              0x8a
 107 #define VERIFY_16             0x8f
 108 #define SERVICE_ACTION_IN     0x9e
 109 /* values for service action in */
 110 #define SAI_READ_CAPACITY_16  0x10
 111 /* values for maintenance in */
 112 #define MI_REPORT_TARGET_PGS  0x0a
 113
 114 /* Values for T10/04-262r7 */
 115 #define ATA_16                0x85      /* 16-byte pass-thru */
 116 #define ATA_12                0xa1      /* 12-byte pass-thru */
 117
 118 /*
 119  *  SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
 120  *  T10/1561-D Revision 4 Draft dated 7th November 2002.
 121  */
 122 #define SAM_STAT_GOOD            0x00
 123 #define SAM_STAT_CHECK_CONDITION 0x02
 124 #define SAM_STAT_CONDITION_MET   0x04
 125 #define SAM_STAT_BUSY            0x08
 126 #define SAM_STAT_INTERMEDIATE    0x10
 127 #define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14
 128 #define SAM_STAT_RESERVATION_CONFLICT 0x18
 129 #define SAM_STAT_COMMAND_TERMINATED 0x22        /* obsolete in SAM-3 */
 130 #define SAM_STAT_TASK_SET_FULL   0x28
 131 #define SAM_STAT_ACA_ACTIVE      0x30
 132 #define SAM_STAT_TASK_ABORTED    0x40
 133
 134 /** scsi_status_is_good - check the status return.
 135  *
 136  * @status: the status passed up from the driver (including host and
 137  *          driver components)
 138  *
 139  * This returns true for known good conditions that may be treated as
 140  * command completed normally
 141  */
 142 static inline int scsi_status_is_good(int status)
 143 {
 144         /*
 145          * FIXME: bit0 is listed as reserved in SCSI-2, but is
 146          * significant in SCSI-3.  For now, we follow the SCSI-2
 147          * behaviour and ignore reserved bits.
 148          */
 149         status &= 0xfe;
 150         return ((status == SAM_STAT_GOOD) ||
 151                 (status == SAM_STAT_INTERMEDIATE) ||
 152                 (status == SAM_STAT_INTERMEDIATE_CONDITION_MET) ||
 153                 /* FIXME: this is obsolete in SAM-3 */
 154                 (status == SAM_STAT_COMMAND_TERMINATED));
 155 }
 156
 157 /*
 158  *  Status codes. These are deprecated as they are shifted 1 bit right
 159  *  from those found in the SCSI standards. This causes confusion for
 160  *  applications that are ported to several OSes. Prefer SAM Status codes
 161  *  above.
 162  */
 163
 164 #define GOOD                 0x00
 165 #define CHECK_CONDITION      0x01
 166 #define CONDITION_GOOD       0x02
 167 #define BUSY                 0x04
 168 #define INTERMEDIATE_GOOD    0x08
 169 #define INTERMEDIATE_C_GOOD  0x0a
 170 #define RESERVATION_CONFLICT 0x0c
 171 #define COMMAND_TERMINATED   0x11
 172 #define QUEUE_FULL           0x14
 173 #define ACA_ACTIVE           0x18
 174 #define TASK_ABORTED         0x20
 175
 176 #define STATUS_MASK          0xfe
 177
 178 /*
 179  *  SENSE KEYS
 180  */
 181
 182 #define NO_SENSE            0x00
 183 #define RECOVERED_ERROR     0x01
 184 #define NOT_READY           0x02
 185 #define MEDIUM_ERROR        0x03
 186 #define HARDWARE_ERROR      0x04
 187 #define ILLEGAL_REQUEST     0x05
 188 #define UNIT_ATTENTION      0x06
 189 #define DATA_PROTECT        0x07
 190 #define BLANK_CHECK         0x08
 191 #define COPY_ABORTED        0x0a
 192 #define ABORTED_COMMAND     0x0b
 193 #define VOLUME_OVERFLOW     0x0d
 194 #define MISCOMPARE          0x0e
 195
 196
 197 /*
 198  *  DEVICE TYPES
 199  *  Please keep them in 0x%02x format for $MODALIAS to work
 200  */
 201
 202 #define TYPE_DISK           0x00
 203 #define TYPE_TAPE           0x01
 204 #define TYPE_PRINTER        0x02
 205 #define TYPE_PROCESSOR      0x03    /* HP scanners use this */
 206 #define TYPE_WORM           0x04    /* Treated as ROM by our system */
 207 #define TYPE_ROM            0x05
 208 #define TYPE_SCANNER        0x06
 209 #define TYPE_MOD            0x07    /* Magneto-optical disk -
 210                                      * - treated as TYPE_DISK */
 211 #define TYPE_MEDIUM_CHANGER 0x08
 212 #define TYPE_COMM           0x09    /* Communications device */
 213 #define TYPE_RAID           0x0c
 214 #define TYPE_ENCLOSURE      0x0d    /* Enclosure Services Device */
 215 #define TYPE_RBC            0x0e
 216 #define TYPE_NO_LUN         0x7f
 217
 218 /* Returns a human-readable name for the device */
 219 extern const char * scsi_device_type(unsigned type);
 220
 221 /*
 222  * standard mode-select header prepended to all mode-select commands
 223  */
 224
 225 struct ccs_modesel_head {
 226         __u8 _r1;                       /* reserved */
 227         __u8 medium;            /* device-specific medium type */
 228         __u8 _r2;                       /* reserved */
 229         __u8 block_desc_length; /* block descriptor length */
 230         __u8 density;           /* device-specific density code */
 231         __u8 number_blocks_hi;  /* number of blocks in this block desc */
 232         __u8 number_blocks_med;
 233         __u8 number_blocks_lo;
 234         __u8 _r3;
 235         __u8 block_length_hi;   /* block length for blocks in this desc */
 236         __u8 block_length_med;
 237         __u8 block_length_lo;
 238 };
 239
 240 /*
 241  * ScsiLun: 8 byte LUN.
 242  */
 243 struct scsi_lun {
 244         __u8 scsi_lun[8];
 245 };
 246
 247 /*
 248  *  MESSAGE CODES
 249  */
 250
 251 #define COMMAND_COMPLETE    0x00
 252 #define EXTENDED_MESSAGE    0x01
 253 #define     EXTENDED_MODIFY_DATA_POINTER    0x00
 254 #define     EXTENDED_SDTR                   0x01
 255 #define     EXTENDED_EXTENDED_IDENTIFY      0x02    /* SCSI-I only */
 256 #define     EXTENDED_WDTR                   0x03
 257 #define     EXTENDED_PPR                    0x04
 258 #define     EXTENDED_MODIFY_BIDI_DATA_PTR   0x05
 259 #define SAVE_POINTERS       0x02
 260 #define RESTORE_POINTERS    0x03
 261 #define DISCONNECT          0x04
 262 #define INITIATOR_ERROR     0x05
 263 #define ABORT_TASK_SET      0x06
 264 #define MESSAGE_REJECT      0x07
 265 #define NOP                 0x08
 266 #define MSG_PARITY_ERROR    0x09
 267 #define LINKED_CMD_COMPLETE 0x0a
 268 #define LINKED_FLG_CMD_COMPLETE 0x0b
 269 #define TARGET_RESET        0x0c
 270 #define ABORT_TASK          0x0d
 271 #define CLEAR_TASK_SET      0x0e
 272 #define INITIATE_RECOVERY   0x0f            /* SCSI-II only */
 273 #define RELEASE_RECOVERY    0x10            /* SCSI-II only */
 274 #define CLEAR_ACA           0x16
 275 #define LOGICAL_UNIT_RESET  0x17
 276 #define SIMPLE_QUEUE_TAG    0x20
 277 #define HEAD_OF_QUEUE_TAG   0x21
 278 #define ORDERED_QUEUE_TAG   0x22
 279 #define IGNORE_WIDE_RESIDUE 0x23
 280 #define ACA                 0x24
 281 #define QAS_REQUEST         0x55
 282
 283 /* Old SCSI2 names, don't use in new code */
 284 #define BUS_DEVICE_RESET    TARGET_RESET
 285 #define ABORT               ABORT_TASK_SET
 286
 287 /*
 288  * Host byte codes
 289  */
 290
 291 #define DID_OK          0x00    /* NO error                                */
 292 #define DID_NO_CONNECT  0x01    /* Couldn't connect before timeout period  */
 293 #define DID_BUS_BUSY    0x02    /* BUS stayed busy through time out period */
 294 #define DID_TIME_OUT    0x03    /* TIMED OUT for other reason              */
 295 #define DID_BAD_TARGET  0x04    /* BAD target.                             */
 296 #define DID_ABORT       0x05    /* Told to abort for some other reason     */
 297 #define DID_PARITY      0x06    /* Parity error                            */
 298 #define DID_ERROR       0x07    /* Internal error                          */
 299 #define DID_RESET       0x08    /* Reset by somebody.                      */
 300 #define DID_BAD_INTR    0x09    /* Got an interrupt we weren't expecting.  */
 301 #define DID_PASSTHROUGH 0x0a    /* Force command past mid-layer            */
 302 #define DID_SOFT_ERROR  0x0b    /* The low level driver just wish a retry  */
 303 #define DID_IMM_RETRY   0x0c    /* Retry without decrementing retry count  */
 304 #define DID_REQUEUE     0x0d    /* Requeue command (no immediate retry) also
 305                                  * without decrementing the retry count    */
 306 #define DRIVER_OK       0x00    /* Driver status                           */
 307
 308 /*
 309  *  These indicate the error that occurred, and what is available.
 310  */
 311
 312 #define DRIVER_BUSY         0x01
 313 #define DRIVER_SOFT         0x02
 314 #define DRIVER_MEDIA        0x03
 315 #define DRIVER_ERROR        0x04
 316
 317 #define DRIVER_INVALID      0x05
 318 #define DRIVER_TIMEOUT      0x06
 319 #define DRIVER_HARD         0x07
 320 #define DRIVER_SENSE        0x08
 321
 322 #define SUGGEST_RETRY       0x10
 323 #define SUGGEST_ABORT       0x20
 324 #define SUGGEST_REMAP       0x30
 325 #define SUGGEST_DIE         0x40
 326 #define SUGGEST_SENSE       0x80
 327 #define SUGGEST_IS_OK       0xff
 328
 329 #define DRIVER_MASK         0x0f
 330 #define SUGGEST_MASK        0xf0
 331
 332 /*
 333  * Internal return values.
 334  */
 335
 336 #define NEEDS_RETRY     0x2001
 337 #define SUCCESS         0x2002
 338 #define FAILED          0x2003
 339 #define QUEUED          0x2004
 340 #define SOFT_ERROR      0x2005
 341 #define ADD_TO_MLQUEUE  0x2006
 342 #define TIMEOUT_ERROR   0x2007
 343
 344 /*
 345  * Midlevel queue return values.
 346  */
 347 #define SCSI_MLQUEUE_HOST_BUSY   0x1055
 348 #define SCSI_MLQUEUE_DEVICE_BUSY 0x1056
 349 #define SCSI_MLQUEUE_EH_RETRY    0x1057
 350
 351 /*
 352  *  Use these to separate status msg and our bytes
 353  *
 354  *  These are set by:
 355  *
 356  *      status byte = set from target device
 357  *      msg_byte    = return status from host adapter itself.
 358  *      host_byte   = set by low-level driver to indicate status.
 359  *      driver_byte = set by mid-level.
 360  */
 361 #define status_byte(result) (((result) >> 1) & 0x7f)
 362 #define msg_byte(result)    (((result) >> 8) & 0xff)
 363 #define host_byte(result)   (((result) >> 16) & 0xff)
 364 #define driver_byte(result) (((result) >> 24) & 0xff)
 365 #define suggestion(result)  (driver_byte(result) & SUGGEST_MASK)
 366
 367 #define sense_class(sense)  (((sense) >> 4) & 0x7)
 368 #define sense_error(sense)  ((sense) & 0xf)
 369 #define sense_valid(sense)  ((sense) & 0x80);
 370
 371 /*
 372  * default timeouts
 373 */
 374 #define FORMAT_UNIT_TIMEOUT             (2 * 60 * 60 * HZ)
 375 #define START_STOP_TIMEOUT              (60 * HZ)
 376 #define MOVE_MEDIUM_TIMEOUT             (5 * 60 * HZ)
 377 #define READ_ELEMENT_STATUS_TIMEOUT     (5 * 60 * HZ)
 378 #define READ_DEFECT_DATA_TIMEOUT        (60 * HZ )
 379
 380
 381 #define IDENTIFY_BASE       0x80
 382 #define IDENTIFY(can_disconnect, lun)   (IDENTIFY_BASE |\
 383                      ((can_disconnect) ?  0x40 : 0) |\
 384                      ((lun) & 0x07))
 385
 386 /*
 387  *  struct scsi_device::scsi_level values. For SCSI devices other than those
 388  *  prior to SCSI-2 (i.e. over 12 years old) this value is (resp[2] + 1)
 389  *  where "resp" is a byte array of the response to an INQUIRY. The scsi_level
 390  *  variable is visible to the user via sysfs.
 391  */
 392
 393 #define SCSI_UNKNOWN    0
 394 #define SCSI_1          1
 395 #define SCSI_1_CCS      2
 396 #define SCSI_2          3
 397 #define SCSI_3          4        /* SPC */
 398 #define SCSI_SPC_2      5
 399 #define SCSI_SPC_3      6
 400
 401 /*
 402  * INQ PERIPHERAL QUALIFIERS
 403  */
 404 #define SCSI_INQ_PQ_CON         0x00
 405 #define SCSI_INQ_PQ_NOT_CON     0x01
 406 #define SCSI_INQ_PQ_NOT_CAP     0x03
 407
 408
 409 /*
 410  * Here are some scsi specific ioctl commands which are sometimes useful.
 411  *
 412  * Note that include/linux/cdrom.h also defines IOCTL 0x5300 - 0x5395
 413  */
 414
 415 /* Used to obtain PUN and LUN info.  Conflicts with CDROMAUDIOBUFSIZ */
 416 #define SCSI_IOCTL_GET_IDLUN            0x5382
 417
 418 /* 0x5383 and 0x5384 were used for SCSI_IOCTL_TAGGED_{ENABLE,DISABLE} */
 419
 420 /* Used to obtain the host number of a device. */
 421 #define SCSI_IOCTL_PROBE_HOST           0x5385
 422
 423 /* Used to obtain the bus number for a device */
 424 #define SCSI_IOCTL_GET_BUS_NUMBER       0x5386
 425
 426 /* Used to obtain the PCI location of a device */
 427 #define SCSI_IOCTL_GET_PCI              0x5387
 428
 429 /* Pull a u32 out of a SCSI message (using BE SCSI conventions) */
 430 static inline __u32 scsi_to_u32(__u8 *ptr)
 431 {
 432         return (ptr[0]<<24) + (ptr[1]<<16) + (ptr[2]<<8) + ptr[3];
 433 }
 434
 435 #endif /* _SCSI_SCSI_H */