3 * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
5 * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
6 * and Cort Dougan (PReP) (cort@cs.nmt.edu)
7 * Copyright (C) 1996 Paul Mackerras
8 * PPC44x/36-bit changes by Matt Porter (mporter@mvista.com)
10 * Derived from "arch/i386/mm/init.c"
11 * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
13 * This program is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License
15 * as published by the Free Software Foundation; either version
16 * 2 of the License, or (at your option) any later version.
20 #include <linux/module.h>
21 #include <linux/sched.h>
22 #include <linux/kernel.h>
23 #include <linux/errno.h>
24 #include <linux/string.h>
25 #include <linux/types.h>
27 #include <linux/stddef.h>
28 #include <linux/init.h>
29 #include <linux/bootmem.h>
30 #include <linux/highmem.h>
31 #include <linux/initrd.h>
32 #include <linux/pagemap.h>
33 #include <linux/memblock.h>
34 #include <linux/gfp.h>
36 #include <asm/pgalloc.h>
39 #include <asm/pgtable.h>
42 #include <asm/machdep.h>
43 #include <asm/btext.h>
45 #include <asm/sections.h>
46 #include <asm/system.h>
50 #if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
51 /* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */
52 #if (CONFIG_LOWMEM_SIZE > (0xF0000000 - PAGE_OFFSET))
53 #error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL"
56 #define MAX_LOW_MEM CONFIG_LOWMEM_SIZE
58 phys_addr_t total_memory
;
59 phys_addr_t total_lowmem
;
61 phys_addr_t memstart_addr
= (phys_addr_t
)~0ull;
62 EXPORT_SYMBOL(memstart_addr
);
63 phys_addr_t kernstart_addr
;
64 EXPORT_SYMBOL(kernstart_addr
);
65 phys_addr_t lowmem_end_addr
;
68 #ifdef CONFIG_PPC_PMAC
69 unsigned long agp_special_page
;
70 EXPORT_SYMBOL(agp_special_page
);
75 /* XXX should be in current.h -- paulus */
76 extern struct task_struct
*current_set
[NR_CPUS
];
79 * this tells the system to map all of ram with the segregs
80 * (i.e. page tables) instead of the bats.
83 int __map_without_bats
;
84 int __map_without_ltlbs
;
87 * This tells the system to allow ioremapping memory marked as reserved.
89 int __allow_ioremap_reserved
;
91 /* max amount of low RAM to map in */
92 unsigned long __max_low_memory
= MAX_LOW_MEM
;
95 * address of the limit of what is accessible with initial MMU setup -
96 * 256MB usually, but only 16MB on 601.
98 phys_addr_t __initial_memory_limit_addr
= (phys_addr_t
)0x10000000;
101 * Check for command-line options that affect what MMU_init will do.
105 /* Check for nobats option (used in mapin_ram). */
106 if (strstr(cmd_line
, "nobats")) {
107 __map_without_bats
= 1;
110 if (strstr(cmd_line
, "noltlbs")) {
111 __map_without_ltlbs
= 1;
113 #ifdef CONFIG_DEBUG_PAGEALLOC
114 __map_without_bats
= 1;
115 __map_without_ltlbs
= 1;
120 * MMU_init sets up the basic memory mappings for the kernel,
121 * including both RAM and possibly some I/O regions,
122 * and sets up the page tables and the MMU hardware ready to go.
124 void __init
MMU_init(void)
127 ppc_md
.progress("MMU:enter", 0x111);
129 /* 601 can only access 16MB at the moment */
130 if (PVR_VER(mfspr(SPRN_PVR
)) == 1)
131 __initial_memory_limit_addr
= 0x01000000;
132 /* 8xx can only access 8MB at the moment */
133 if (PVR_VER(mfspr(SPRN_PVR
)) == 0x50)
134 __initial_memory_limit_addr
= 0x00800000;
136 /* parse args from command line */
139 if (memblock
.memory
.cnt
> 1) {
141 memblock
.memory
.cnt
= 1;
143 printk(KERN_WARNING
"Only using first contiguous memory region");
149 total_lowmem
= total_memory
= memblock_end_of_DRAM() - memstart_addr
;
150 lowmem_end_addr
= memstart_addr
+ total_lowmem
;
152 #ifdef CONFIG_FSL_BOOKE
153 /* Freescale Book-E parts expect lowmem to be mapped by fixed TLB
154 * entries, so we need to adjust lowmem to match the amount we can map
155 * in the fixed entries */
156 adjust_total_lowmem();
157 #endif /* CONFIG_FSL_BOOKE */
159 if (total_lowmem
> __max_low_memory
) {
160 total_lowmem
= __max_low_memory
;
161 lowmem_end_addr
= memstart_addr
+ total_lowmem
;
162 #ifndef CONFIG_HIGHMEM
163 total_memory
= total_lowmem
;
164 memblock_enforce_memory_limit(lowmem_end_addr
);
166 #endif /* CONFIG_HIGHMEM */
169 /* Initialize the MMU hardware */
171 ppc_md
.progress("MMU:hw init", 0x300);
174 /* Map in all of RAM starting at KERNELBASE */
176 ppc_md
.progress("MMU:mapin", 0x301);
179 /* Initialize early top-down ioremap allocator */
180 ioremap_bot
= IOREMAP_TOP
;
182 /* Map in I/O resources */
184 ppc_md
.progress("MMU:setio", 0x302);
187 ppc_md
.progress("MMU:exit", 0x211);
189 /* From now on, btext is no longer BAT mapped if it was at all */
190 #ifdef CONFIG_BOOTX_TEXT
195 /* This is only called until mem_init is done. */
196 void __init
*early_get_page(void)
200 if (init_bootmem_done
) {
201 p
= alloc_bootmem_pages(PAGE_SIZE
);
203 p
= __va(memblock_alloc_base(PAGE_SIZE
, PAGE_SIZE
,
204 __initial_memory_limit_addr
));
209 /* Free up now-unused memory */
210 static void free_sec(unsigned long start
, unsigned long end
, const char *name
)
212 unsigned long cnt
= 0;
214 while (start
< end
) {
215 ClearPageReserved(virt_to_page(start
));
216 init_page_count(virt_to_page(start
));
222 printk(" %ldk %s", cnt
<< (PAGE_SHIFT
- 10), name
);
223 totalram_pages
+= cnt
;
227 void free_initmem(void)
229 #define FREESEC(TYPE) \
230 free_sec((unsigned long)(&__ ## TYPE ## _begin), \
231 (unsigned long)(&__ ## TYPE ## _end), \
234 printk ("Freeing unused kernel memory:");
237 ppc_md
.progress
= NULL
;
241 #ifdef CONFIG_BLK_DEV_INITRD
242 void free_initrd_mem(unsigned long start
, unsigned long end
)
245 printk ("Freeing initrd memory: %ldk freed\n", (end
- start
) >> 10);
246 for (; start
< end
; start
+= PAGE_SIZE
) {
247 ClearPageReserved(virt_to_page(start
));
248 init_page_count(virt_to_page(start
));