2 * tsi108/109 device setup code
4 * Maintained by Roy Zang < tie-fei.zang@freescale.com >
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
12 #include <linux/stddef.h>
13 #include <linux/kernel.h>
14 #include <linux/init.h>
15 #include <linux/errno.h>
16 #include <linux/major.h>
17 #include <linux/delay.h>
18 #include <linux/irq.h>
19 #include <linux/module.h>
20 #include <linux/device.h>
21 #include <linux/platform_device.h>
22 #include <linux/of_net.h>
23 #include <asm/tsi108.h>
25 #include <asm/system.h>
26 #include <linux/atomic.h>
30 #include <mm/mmu_decl.h>
35 #define DBG(fmt...) do { printk(fmt); } while(0)
37 #define DBG(fmt...) do { } while(0)
40 static phys_addr_t tsi108_csr_base
= -1;
42 phys_addr_t
get_csrbase(void)
44 struct device_node
*tsi
;
46 if (tsi108_csr_base
!= -1)
47 return tsi108_csr_base
;
49 tsi
= of_find_node_by_type(NULL
, "tsi-bridge");
52 const void *prop
= of_get_property(tsi
, "reg", &size
);
53 tsi108_csr_base
= of_translate_address(tsi
, prop
);
56 return tsi108_csr_base
;
59 u32
get_vir_csrbase(void)
61 return (u32
) (ioremap(get_csrbase(), 0x10000));
64 EXPORT_SYMBOL(get_csrbase
);
65 EXPORT_SYMBOL(get_vir_csrbase
);
67 static int __init
tsi108_eth_of_init(void)
69 struct device_node
*np
;
71 struct platform_device
*tsi_eth_dev
;
75 for_each_compatible_node(np
, "network", "tsi108-ethernet") {
77 struct device_node
*phy
, *mdio
;
79 const unsigned int *phy_id
;
83 memset(r
, 0, sizeof(r
));
84 memset(&tsi_eth_data
, 0, sizeof(tsi_eth_data
));
86 ret
= of_address_to_resource(np
, 0, &r
[0]);
87 DBG("%s: name:start->end = %s:%pR\n",
88 __func__
, r
[0].name
, &r
[0]);
93 r
[1].start
= irq_of_parse_and_map(np
, 0);
94 r
[1].end
= irq_of_parse_and_map(np
, 0);
95 r
[1].flags
= IORESOURCE_IRQ
;
96 DBG("%s: name:start->end = %s:%pR\n",
97 __func__
, r
[1].name
, &r
[1]);
100 platform_device_register_simple("tsi-ethernet", i
++, &r
[0],
103 if (IS_ERR(tsi_eth_dev
)) {
104 ret
= PTR_ERR(tsi_eth_dev
);
108 mac_addr
= of_get_mac_address(np
);
110 memcpy(tsi_eth_data
.mac_addr
, mac_addr
, 6);
112 ph
= of_get_property(np
, "mdio-handle", NULL
);
113 mdio
= of_find_node_by_phandle(*ph
);
114 ret
= of_address_to_resource(mdio
, 0, &res
);
119 ph
= of_get_property(np
, "phy-handle", NULL
);
120 phy
= of_find_node_by_phandle(*ph
);
127 phy_id
= of_get_property(phy
, "reg", NULL
);
129 tsi_eth_data
.regs
= r
[0].start
;
130 tsi_eth_data
.phyregs
= res
.start
;
131 tsi_eth_data
.phy
= *phy_id
;
132 tsi_eth_data
.irq_num
= irq_of_parse_and_map(np
, 0);
134 /* Some boards with the TSI108 bridge (e.g. Holly)
135 * have a miswiring of the ethernet PHYs which
136 * requires a workaround. The special
137 * "txc-rxc-delay-disable" property enables this
138 * workaround. FIXME: Need to port the tsi108_eth
139 * driver itself to phylib and use a non-misleading
140 * name for the workaround flag - it's not actually to
141 * do with the model of PHY in use */
142 if (of_get_property(phy
, "txc-rxc-delay-disable", NULL
))
143 tsi_eth_data
.phy_type
= TSI108_PHY_BCM54XX
;
147 platform_device_add_data(tsi_eth_dev
, &tsi_eth_data
,
154 platform_device_unregister(tsi_eth_dev
);
160 arch_initcall(tsi108_eth_of_init
);