arch/mips/pmc-sierra/yosemite/irq.c

   1 /*
   2  * Copyright (C) 2003 PMC-Sierra Inc.
   3  * Author: Manish Lachwani (lachwani@pmc-sierra.com)
   4  *
   5  *  This program is free software; you can redistribute  it and/or modify it
   6  *  under  the terms of  the GNU General  Public License as published by the
   7  *  Free Software Foundation;  either version 2 of the  License, or (at your
   8  *  option) any later version.
   9  *
  10  *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
  11  *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
  12  *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
  13  *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
  14  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  15  *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
  16  *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  17  *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
  18  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  19  *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  20  *
  21  *  You should have received a copy of the  GNU General Public License along
  22  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  23  *  675 Mass Ave, Cambridge, MA 02139, USA.
  24  *
  25  * Second level Interrupt handlers for the PMC-Sierra Titan/Yosemite board
  26  */
  27 #include <linux/config.h>
  28 #include <linux/errno.h>
  29 #include <linux/init.h>
  30 #include <linux/kernel_stat.h>
  31 #include <linux/module.h>
  32 #include <linux/signal.h>
  33 #include <linux/sched.h>
  34 #include <linux/types.h>
  35 #include <linux/interrupt.h>
  36 #include <linux/ioport.h>
  37 #include <linux/irq.h>
  38 #include <linux/timex.h>
  39 #include <linux/slab.h>
  40 #include <linux/random.h>
  41 #include <linux/bitops.h>
  42 #include <asm/bootinfo.h>
  43 #include <asm/io.h>
  44 #include <asm/irq.h>
  45 #include <asm/irq_cpu.h>
  46 #include <asm/mipsregs.h>
  47 #include <asm/system.h>
  48 #include <asm/titan_dep.h>
  49
  50 /* Hypertransport specific */
  51 #define IRQ_ACK_BITS            0x00000000      /* Ack bits */
  52
  53 #define HYPERTRANSPORT_INTA     0x78            /* INTA# */
  54 #define HYPERTRANSPORT_INTB     0x79            /* INTB# */
  55 #define HYPERTRANSPORT_INTC     0x7a            /* INTC# */
  56 #define HYPERTRANSPORT_INTD     0x7b            /* INTD# */
  57
  58 extern asmlinkage void titan_handle_int(void);
  59 extern void jaguar_mailbox_irq(struct pt_regs *);
  60
  61 /*
  62  * Handle hypertransport & SMP interrupts. The interrupt lines are scarce.
  63  * For interprocessor interrupts, the best thing to do is to use the INTMSG
  64  * register. We use the same external interrupt line, i.e. INTB3 and monitor
  65  * another status bit
  66  */
  67 asmlinkage void ll_ht_smp_irq_handler(int irq, struct pt_regs *regs)
  68 {
  69         u32 status = OCD_READ(RM9000x2_OCD_INTP0STATUS4);
  70
  71         /* Ack all the bits that correspond to the interrupt sources */
  72         if (status != 0)
  73                 OCD_WRITE(RM9000x2_OCD_INTP0STATUS4, IRQ_ACK_BITS);
  74
  75         status = OCD_READ(RM9000x2_OCD_INTP1STATUS4);
  76         if (status != 0)
  77                 OCD_WRITE(RM9000x2_OCD_INTP1STATUS4, IRQ_ACK_BITS);
  78
  79 #ifdef CONFIG_HT_LEVEL_TRIGGER
  80         /*
  81          * Level Trigger Mode only. Send the HT EOI message back to the source.
  82          */
  83         switch (status) {
  84         case 0x1000000:
  85                 OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTA);
  86                 break;
  87         case 0x2000000:
  88                 OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTB);
  89                 break;
  90         case 0x4000000:
  91                 OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTC);
  92                 break;
  93         case 0x8000000:
  94                 OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTD);
  95                 break;
  96         case 0x0000001:
  97                 /* PLX */
  98                 OCD_WRITE(RM9000x2_OCD_HTEOI, 0x20);
  99                 OCD_WRITE(IRQ_CLEAR_REG, IRQ_ACK_BITS);
 100                 break;
 101         case 0xf000000:
 102                 OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTA);
 103                 OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTB);
 104                 OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTC);
 105                 OCD_WRITE(RM9000x2_OCD_HTEOI, HYPERTRANSPORT_INTD);
 106                 break;
 107         }
 108 #endif /* CONFIG_HT_LEVEL_TRIGGER */
 109
 110         do_IRQ(irq, regs);
 111 }
 112
 113 asmlinkage void do_extended_irq(struct pt_regs *regs)
 114 {
 115         unsigned int intcontrol = read_c0_intcontrol();
 116         unsigned int cause = read_c0_cause();
 117         unsigned int status = read_c0_status();
 118         unsigned int pending_sr, pending_ic;
 119
 120         pending_sr = status & cause & 0xff00;
 121         pending_ic = (cause >> 8) & intcontrol & 0xff00;
 122
 123         if (pending_ic & (1 << 13))
 124                 do_IRQ(13, regs);
 125
 126 }
 127
 128 #ifdef CONFIG_KGDB
 129 extern void init_second_port(void);
 130 #endif
 131
 132 /*
 133  * Initialize the next level interrupt handler
 134  */
 135 void __init arch_init_irq(void)
 136 {
 137         clear_c0_status(ST0_IM);
 138
 139         set_except_vector(0, titan_handle_int);
 140         mips_cpu_irq_init(0);
 141         rm7k_cpu_irq_init(8);
 142         rm9k_cpu_irq_init(12);
 143
 144 #ifdef CONFIG_KGDB
 145         /* At this point, initialize the second serial port */
 146         init_second_port();
 147 #endif
 148
 149 #ifdef CONFIG_GDB_CONSOLE
 150         register_gdb_console();
 151 #endif
 152 }
 153
 154 #ifdef CONFIG_KGDB
 155 /*
 156  * The 16550 DUART has two ports, but is allocated one IRQ
 157  * for the serial console. Hence, a generic framework for
 158  * serial IRQ routing in place. Currently, just calls the
 159  * do_IRQ fuction. But, going in the future, need to check
 160  * DUART registers for channel A and B, then decide the
 161  * appropriate action
 162  */
 163 asmlinkage void yosemite_kgdb_irq(int irq, struct pt_regs *regs)
 164 {
 165         do_IRQ(irq, regs);
 166 }
 167 #endif