drivers/tty/serial/serial_ks8695.c

   1 /*
   2  *  drivers/serial/serial_ks8695.c
   3  *
   4  *  Driver for KS8695 serial ports
   5  *
   6  *  Based on drivers/serial/serial_amba.c, by Kam Lee.
   7  *
   8  *  Copyright 2002-2005 Micrel Inc.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2 of the License, or
  13  * (at your option) any later version.
  14  *
  15  */
  16 #include <linux/module.h>
  17 #include <linux/tty.h>
  18 #include <linux/ioport.h>
  19 #include <linux/init.h>
  20 #include <linux/serial.h>
  21 #include <linux/console.h>
  22 #include <linux/sysrq.h>
  23 #include <linux/device.h>
  24
  25 #include <asm/io.h>
  26 #include <asm/irq.h>
  27 #include <asm/mach/irq.h>
  28
  29 #include <mach/regs-uart.h>
  30 #include <mach/regs-irq.h>
  31
  32 #if defined(CONFIG_SERIAL_KS8695_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
  33 #define SUPPORT_SYSRQ
  34 #endif
  35
  36 #include <linux/serial_core.h>
  37
  38
  39 #define SERIAL_KS8695_MAJOR     204
  40 #define SERIAL_KS8695_MINOR     16
  41 #define SERIAL_KS8695_DEVNAME   "ttyAM"
  42
  43 #define SERIAL_KS8695_NR        1
  44
  45 /*
  46  * Access macros for the KS8695 UART
  47  */
  48 #define UART_GET_CHAR(p)        (__raw_readl((p)->membase + KS8695_URRB) & 0xFF)
  49 #define UART_PUT_CHAR(p, c)     __raw_writel((c), (p)->membase + KS8695_URTH)
  50 #define UART_GET_FCR(p)         __raw_readl((p)->membase + KS8695_URFC)
  51 #define UART_PUT_FCR(p, c)      __raw_writel((c), (p)->membase + KS8695_URFC)
  52 #define UART_GET_MSR(p)         __raw_readl((p)->membase + KS8695_URMS)
  53 #define UART_GET_LSR(p)         __raw_readl((p)->membase + KS8695_URLS)
  54 #define UART_GET_LCR(p)         __raw_readl((p)->membase + KS8695_URLC)
  55 #define UART_PUT_LCR(p, c)      __raw_writel((c), (p)->membase + KS8695_URLC)
  56 #define UART_GET_MCR(p)         __raw_readl((p)->membase + KS8695_URMC)
  57 #define UART_PUT_MCR(p, c)      __raw_writel((c), (p)->membase + KS8695_URMC)
  58 #define UART_GET_BRDR(p)        __raw_readl((p)->membase + KS8695_URBD)
  59 #define UART_PUT_BRDR(p, c)     __raw_writel((c), (p)->membase + KS8695_URBD)
  60
  61 #define KS8695_CLR_TX_INT()     __raw_writel(1 << KS8695_IRQ_UART_TX, KS8695_IRQ_VA + KS8695_INTST)
  62
  63 #define UART_DUMMY_LSR_RX       0x100
  64 #define UART_PORT_SIZE          (KS8695_USR - KS8695_URRB + 4)
  65
  66 static inline int tx_enabled(struct uart_port *port)
  67 {
  68         return port->unused[0] & 1;
  69 }
  70
  71 static inline int rx_enabled(struct uart_port *port)
  72 {
  73         return port->unused[0] & 2;
  74 }
  75
  76 static inline int ms_enabled(struct uart_port *port)
  77 {
  78         return port->unused[0] & 4;
  79 }
  80
  81 static inline void ms_enable(struct uart_port *port, int enabled)
  82 {
  83         if(enabled)
  84                 port->unused[0] |= 4;
  85         else
  86                 port->unused[0] &= ~4;
  87 }
  88
  89 static inline void rx_enable(struct uart_port *port, int enabled)
  90 {
  91         if(enabled)
  92                 port->unused[0] |= 2;
  93         else
  94                 port->unused[0] &= ~2;
  95 }
  96
  97 static inline void tx_enable(struct uart_port *port, int enabled)
  98 {
  99         if(enabled)
 100                 port->unused[0] |= 1;
 101         else
 102                 port->unused[0] &= ~1;
 103 }
 104
 105
 106 #ifdef SUPPORT_SYSRQ
 107 static struct console ks8695_console;
 108 #endif
 109
 110 static void ks8695uart_stop_tx(struct uart_port *port)
 111 {
 112         if (tx_enabled(port)) {
 113                 /* use disable_irq_nosync() and not disable_irq() to avoid self
 114                  * imposed deadlock by not waiting for irq handler to end,
 115                  * since this ks8695uart_stop_tx() is called from interrupt context.
 116                  */
 117                 disable_irq_nosync(KS8695_IRQ_UART_TX);
 118                 tx_enable(port, 0);
 119         }
 120 }
 121
 122 static void ks8695uart_start_tx(struct uart_port *port)
 123 {
 124         if (!tx_enabled(port)) {
 125                 enable_irq(KS8695_IRQ_UART_TX);
 126                 tx_enable(port, 1);
 127         }
 128 }
 129
 130 static void ks8695uart_stop_rx(struct uart_port *port)
 131 {
 132         if (rx_enabled(port)) {
 133                 disable_irq(KS8695_IRQ_UART_RX);
 134                 rx_enable(port, 0);
 135         }
 136 }
 137
 138 static void ks8695uart_enable_ms(struct uart_port *port)
 139 {
 140         if (!ms_enabled(port)) {
 141                 enable_irq(KS8695_IRQ_UART_MODEM_STATUS);
 142                 ms_enable(port,1);
 143         }
 144 }
 145
 146 static void ks8695uart_disable_ms(struct uart_port *port)
 147 {
 148         if (ms_enabled(port)) {
 149                 disable_irq(KS8695_IRQ_UART_MODEM_STATUS);
 150                 ms_enable(port,0);
 151         }
 152 }
 153
 154 static irqreturn_t ks8695uart_rx_chars(int irq, void *dev_id)
 155 {
 156         struct uart_port *port = dev_id;
 157         struct tty_struct *tty = port->state->port.tty;
 158         unsigned int status, ch, lsr, flg, max_count = 256;
 159
 160         status = UART_GET_LSR(port);            /* clears pending LSR interrupts */
 161         while ((status & URLS_URDR) && max_count--) {
 162                 ch = UART_GET_CHAR(port);
 163                 flg = TTY_NORMAL;
 164
 165                 port->icount.rx++;
 166
 167                 /*
 168                  * Note that the error handling code is
 169                  * out of the main execution path
 170                  */
 171                 lsr = UART_GET_LSR(port) | UART_DUMMY_LSR_RX;
 172                 if (unlikely(lsr & (URLS_URBI | URLS_URPE | URLS_URFE | URLS_URROE))) {
 173                         if (lsr & URLS_URBI) {
 174                                 lsr &= ~(URLS_URFE | URLS_URPE);
 175                                 port->icount.brk++;
 176                                 if (uart_handle_break(port))
 177                                         goto ignore_char;
 178                         }
 179                         if (lsr & URLS_URPE)
 180                                 port->icount.parity++;
 181                         if (lsr & URLS_URFE)
 182                                 port->icount.frame++;
 183                         if (lsr & URLS_URROE)
 184                                 port->icount.overrun++;
 185
 186                         lsr &= port->read_status_mask;
 187
 188                         if (lsr & URLS_URBI)
 189                                 flg = TTY_BREAK;
 190                         else if (lsr & URLS_URPE)
 191                                 flg = TTY_PARITY;
 192                         else if (lsr & URLS_URFE)
 193                                 flg = TTY_FRAME;
 194                 }
 195
 196                 if (uart_handle_sysrq_char(port, ch))
 197                         goto ignore_char;
 198
 199                 uart_insert_char(port, lsr, URLS_URROE, ch, flg);
 200
 201 ignore_char:
 202                 status = UART_GET_LSR(port);
 203         }
 204         tty_flip_buffer_push(tty);
 205
 206         return IRQ_HANDLED;
 207 }
 208
 209
 210 static irqreturn_t ks8695uart_tx_chars(int irq, void *dev_id)
 211 {
 212         struct uart_port *port = dev_id;
 213         struct circ_buf *xmit = &port->state->xmit;
 214         unsigned int count;
 215
 216         if (port->x_char) {
 217                 KS8695_CLR_TX_INT();
 218                 UART_PUT_CHAR(port, port->x_char);
 219                 port->icount.tx++;
 220                 port->x_char = 0;
 221                 return IRQ_HANDLED;
 222         }
 223
 224         if (uart_tx_stopped(port) || uart_circ_empty(xmit)) {
 225                 ks8695uart_stop_tx(port);
 226                 return IRQ_HANDLED;
 227         }
 228
 229         count = 16;     /* fifo size */
 230         while (!uart_circ_empty(xmit) && (count-- > 0)) {
 231                 KS8695_CLR_TX_INT();
 232                 UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
 233
 234                 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 235                 port->icount.tx++;
 236         }
 237
 238         if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 239                 uart_write_wakeup(port);
 240
 241         if (uart_circ_empty(xmit))
 242                 ks8695uart_stop_tx(port);
 243
 244         return IRQ_HANDLED;
 245 }
 246
 247 static irqreturn_t ks8695uart_modem_status(int irq, void *dev_id)
 248 {
 249         struct uart_port *port = dev_id;
 250         unsigned int status;
 251
 252         /*
 253          * clear modem interrupt by reading MSR
 254          */
 255         status = UART_GET_MSR(port);
 256
 257         if (status & URMS_URDDCD)
 258                 uart_handle_dcd_change(port, status & URMS_URDDCD);
 259
 260         if (status & URMS_URDDST)
 261                 port->icount.dsr++;
 262
 263         if (status & URMS_URDCTS)
 264                 uart_handle_cts_change(port, status & URMS_URDCTS);
 265
 266         if (status & URMS_URTERI)
 267                 port->icount.rng++;
 268
 269         wake_up_interruptible(&port->state->port.delta_msr_wait);
 270
 271         return IRQ_HANDLED;
 272 }
 273
 274 static unsigned int ks8695uart_tx_empty(struct uart_port *port)
 275 {
 276         return (UART_GET_LSR(port) & URLS_URTE) ? TIOCSER_TEMT : 0;
 277 }
 278
 279 static unsigned int ks8695uart_get_mctrl(struct uart_port *port)
 280 {
 281         unsigned int result = 0;
 282         unsigned int status;
 283
 284         status = UART_GET_MSR(port);
 285         if (status & URMS_URDCD)
 286                 result |= TIOCM_CAR;
 287         if (status & URMS_URDSR)
 288                 result |= TIOCM_DSR;
 289         if (status & URMS_URCTS)
 290                 result |= TIOCM_CTS;
 291         if (status & URMS_URRI)
 292                 result |= TIOCM_RI;
 293
 294         return result;
 295 }
 296
 297 static void ks8695uart_set_mctrl(struct uart_port *port, u_int mctrl)
 298 {
 299         unsigned int mcr;
 300
 301         mcr = UART_GET_MCR(port);
 302         if (mctrl & TIOCM_RTS)
 303                 mcr |= URMC_URRTS;
 304         else
 305                 mcr &= ~URMC_URRTS;
 306
 307         if (mctrl & TIOCM_DTR)
 308                 mcr |= URMC_URDTR;
 309         else
 310                 mcr &= ~URMC_URDTR;
 311
 312         UART_PUT_MCR(port, mcr);
 313 }
 314
 315 static void ks8695uart_break_ctl(struct uart_port *port, int break_state)
 316 {
 317         unsigned int lcr;
 318
 319         lcr = UART_GET_LCR(port);
 320
 321         if (break_state == -1)
 322                 lcr |= URLC_URSBC;
 323         else
 324                 lcr &= ~URLC_URSBC;
 325
 326         UART_PUT_LCR(port, lcr);
 327 }
 328
 329 static int ks8695uart_startup(struct uart_port *port)
 330 {
 331         int retval;
 332
 333         set_irq_flags(KS8695_IRQ_UART_TX, IRQF_VALID | IRQF_NOAUTOEN);
 334         tx_enable(port, 0);
 335         rx_enable(port, 1);
 336         ms_enable(port, 1);
 337
 338         /*
 339          * Allocate the IRQ
 340          */
 341         retval = request_irq(KS8695_IRQ_UART_TX, ks8695uart_tx_chars, IRQF_DISABLED, "UART TX", port);
 342         if (retval)
 343                 goto err_tx;
 344
 345         retval = request_irq(KS8695_IRQ_UART_RX, ks8695uart_rx_chars, IRQF_DISABLED, "UART RX", port);
 346         if (retval)
 347                 goto err_rx;
 348
 349         retval = request_irq(KS8695_IRQ_UART_LINE_STATUS, ks8695uart_rx_chars, IRQF_DISABLED, "UART LineStatus", port);
 350         if (retval)
 351                 goto err_ls;
 352
 353         retval = request_irq(KS8695_IRQ_UART_MODEM_STATUS, ks8695uart_modem_status, IRQF_DISABLED, "UART ModemStatus", port);
 354         if (retval)
 355                 goto err_ms;
 356
 357         return 0;
 358
 359 err_ms:
 360         free_irq(KS8695_IRQ_UART_LINE_STATUS, port);
 361 err_ls:
 362         free_irq(KS8695_IRQ_UART_RX, port);
 363 err_rx:
 364         free_irq(KS8695_IRQ_UART_TX, port);
 365 err_tx:
 366         return retval;
 367 }
 368
 369 static void ks8695uart_shutdown(struct uart_port *port)
 370 {
 371         /*
 372          * Free the interrupt
 373          */
 374         free_irq(KS8695_IRQ_UART_RX, port);
 375         free_irq(KS8695_IRQ_UART_TX, port);
 376         free_irq(KS8695_IRQ_UART_MODEM_STATUS, port);
 377         free_irq(KS8695_IRQ_UART_LINE_STATUS, port);
 378
 379         /* disable break condition and fifos */
 380         UART_PUT_LCR(port, UART_GET_LCR(port) & ~URLC_URSBC);
 381         UART_PUT_FCR(port, UART_GET_FCR(port) & ~URFC_URFE);
 382 }
 383
 384 static void ks8695uart_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old)
 385 {
 386         unsigned int lcr, fcr = 0;
 387         unsigned long flags;
 388         unsigned int baud, quot;
 389
 390         /*
 391          * Ask the core to calculate the divisor for us.
 392          */
 393         baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
 394         quot = uart_get_divisor(port, baud);
 395
 396         switch (termios->c_cflag & CSIZE) {
 397         case CS5:
 398                 lcr = URCL_5;
 399                 break;
 400         case CS6:
 401                 lcr = URCL_6;
 402                 break;
 403         case CS7:
 404                 lcr = URCL_7;
 405                 break;
 406         default:
 407                 lcr = URCL_8;
 408                 break;
 409         }
 410
 411         /* stop bits */
 412         if (termios->c_cflag & CSTOPB)
 413                 lcr |= URLC_URSB;
 414
 415         /* parity */
 416         if (termios->c_cflag & PARENB) {
 417                 if (termios->c_cflag & CMSPAR) {        /* Mark or Space parity */
 418                         if (termios->c_cflag & PARODD)
 419                                 lcr |= URPE_MARK;
 420                         else
 421                                 lcr |= URPE_SPACE;
 422                 }
 423                 else if (termios->c_cflag & PARODD)
 424                         lcr |= URPE_ODD;
 425                 else
 426                         lcr |= URPE_EVEN;
 427         }
 428
 429         if (port->fifosize > 1)
 430                 fcr = URFC_URFRT_8 | URFC_URTFR | URFC_URRFR | URFC_URFE;
 431
 432         spin_lock_irqsave(&port->lock, flags);
 433
 434         /*
 435          * Update the per-port timeout.
 436          */
 437         uart_update_timeout(port, termios->c_cflag, baud);
 438
 439         port->read_status_mask = URLS_URROE;
 440         if (termios->c_iflag & INPCK)
 441                 port->read_status_mask |= (URLS_URFE | URLS_URPE);
 442         if (termios->c_iflag & (BRKINT | PARMRK))
 443                 port->read_status_mask |= URLS_URBI;
 444
 445         /*
 446          * Characters to ignore
 447          */
 448         port->ignore_status_mask = 0;
 449         if (termios->c_iflag & IGNPAR)
 450                 port->ignore_status_mask |= (URLS_URFE | URLS_URPE);
 451         if (termios->c_iflag & IGNBRK) {
 452                 port->ignore_status_mask |= URLS_URBI;
 453                 /*
 454                  * If we're ignoring parity and break indicators,
 455                  * ignore overruns too (for real raw support).
 456                  */
 457                 if (termios->c_iflag & IGNPAR)
 458                         port->ignore_status_mask |= URLS_URROE;
 459         }
 460
 461         /*
 462          * Ignore all characters if CREAD is not set.
 463          */
 464         if ((termios->c_cflag & CREAD) == 0)
 465                 port->ignore_status_mask |= UART_DUMMY_LSR_RX;
 466
 467         /* first, disable everything */
 468         if (UART_ENABLE_MS(port, termios->c_cflag))
 469                 ks8695uart_enable_ms(port);
 470         else
 471                 ks8695uart_disable_ms(port);
 472
 473         /* Set baud rate */
 474         UART_PUT_BRDR(port, quot);
 475
 476         UART_PUT_LCR(port, lcr);
 477         UART_PUT_FCR(port, fcr);
 478
 479         spin_unlock_irqrestore(&port->lock, flags);
 480 }
 481
 482 static const char *ks8695uart_type(struct uart_port *port)
 483 {
 484         return port->type == PORT_KS8695 ? "KS8695" : NULL;
 485 }
 486
 487 /*
 488  * Release the memory region(s) being used by 'port'
 489  */
 490 static void ks8695uart_release_port(struct uart_port *port)
 491 {
 492         release_mem_region(port->mapbase, UART_PORT_SIZE);
 493 }
 494
 495 /*
 496  * Request the memory region(s) being used by 'port'
 497  */
 498 static int ks8695uart_request_port(struct uart_port *port)
 499 {
 500         return request_mem_region(port->mapbase, UART_PORT_SIZE,
 501                         "serial_ks8695") != NULL ? 0 : -EBUSY;
 502 }
 503
 504 /*
 505  * Configure/autoconfigure the port.
 506  */
 507 static void ks8695uart_config_port(struct uart_port *port, int flags)
 508 {
 509         if (flags & UART_CONFIG_TYPE) {
 510                 port->type = PORT_KS8695;
 511                 ks8695uart_request_port(port);
 512         }
 513 }
 514
 515 /*
 516  * verify the new serial_struct (for TIOCSSERIAL).
 517  */
 518 static int ks8695uart_verify_port(struct uart_port *port, struct serial_struct *ser)
 519 {
 520         int ret = 0;
 521
 522         if (ser->type != PORT_UNKNOWN && ser->type != PORT_KS8695)
 523                 ret = -EINVAL;
 524         if (ser->irq != port->irq)
 525                 ret = -EINVAL;
 526         if (ser->baud_base < 9600)
 527                 ret = -EINVAL;
 528         return ret;
 529 }
 530
 531 static struct uart_ops ks8695uart_pops = {
 532         .tx_empty       = ks8695uart_tx_empty,
 533         .set_mctrl      = ks8695uart_set_mctrl,
 534         .get_mctrl      = ks8695uart_get_mctrl,
 535         .stop_tx        = ks8695uart_stop_tx,
 536         .start_tx       = ks8695uart_start_tx,
 537         .stop_rx        = ks8695uart_stop_rx,
 538         .enable_ms      = ks8695uart_enable_ms,
 539         .break_ctl      = ks8695uart_break_ctl,
 540         .startup        = ks8695uart_startup,
 541         .shutdown       = ks8695uart_shutdown,
 542         .set_termios    = ks8695uart_set_termios,
 543         .type           = ks8695uart_type,
 544         .release_port   = ks8695uart_release_port,
 545         .request_port   = ks8695uart_request_port,
 546         .config_port    = ks8695uart_config_port,
 547         .verify_port    = ks8695uart_verify_port,
 548 };
 549
 550 static struct uart_port ks8695uart_ports[SERIAL_KS8695_NR] = {
 551         {
 552                 .membase        = (void *) KS8695_UART_VA,
 553                 .mapbase        = KS8695_UART_VA,
 554                 .iotype         = SERIAL_IO_MEM,
 555                 .irq            = KS8695_IRQ_UART_TX,
 556                 .uartclk        = KS8695_CLOCK_RATE * 16,
 557                 .fifosize       = 16,
 558                 .ops            = &ks8695uart_pops,
 559                 .flags          = ASYNC_BOOT_AUTOCONF,
 560                 .line           = 0,
 561         }
 562 };
 563
 564 #ifdef CONFIG_SERIAL_KS8695_CONSOLE
 565 static void ks8695_console_putchar(struct uart_port *port, int ch)
 566 {
 567         while (!(UART_GET_LSR(port) & URLS_URTHRE))
 568                 barrier();
 569
 570         UART_PUT_CHAR(port, ch);
 571 }
 572
 573 static void ks8695_console_write(struct console *co, const char *s, u_int count)
 574 {
 575         struct uart_port *port = ks8695uart_ports + co->index;
 576
 577         uart_console_write(port, s, count, ks8695_console_putchar);
 578 }
 579
 580 static void __init ks8695_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
 581 {
 582         unsigned int lcr;
 583
 584         lcr = UART_GET_LCR(port);
 585
 586         switch (lcr & URLC_PARITY) {
 587                 case URPE_ODD:
 588                         *parity = 'o';
 589                         break;
 590                 case URPE_EVEN:
 591                         *parity = 'e';
 592                         break;
 593                 default:
 594                         *parity = 'n';
 595         }
 596
 597         switch (lcr & URLC_URCL) {
 598                 case URCL_5:
 599                         *bits = 5;
 600                         break;
 601                 case URCL_6:
 602                         *bits = 6;
 603                         break;
 604                 case URCL_7:
 605                         *bits = 7;
 606                         break;
 607                 default:
 608                         *bits = 8;
 609         }
 610
 611         *baud = port->uartclk / (UART_GET_BRDR(port) & 0x0FFF);
 612         *baud /= 16;
 613         *baud &= 0xFFFFFFF0;
 614 }
 615
 616 static int __init ks8695_console_setup(struct console *co, char *options)
 617 {
 618         struct uart_port *port;
 619         int baud = 115200;
 620         int bits = 8;
 621         int parity = 'n';
 622         int flow = 'n';
 623
 624         /*
 625          * Check whether an invalid uart number has been specified, and
 626          * if so, search for the first available port that does have
 627          * console support.
 628          */
 629         port = uart_get_console(ks8695uart_ports, SERIAL_KS8695_NR, co);
 630
 631         if (options)
 632                 uart_parse_options(options, &baud, &parity, &bits, &flow);
 633         else
 634                 ks8695_console_get_options(port, &baud, &parity, &bits);
 635
 636         return uart_set_options(port, co, baud, parity, bits, flow);
 637 }
 638
 639 static struct uart_driver ks8695_reg;
 640
 641 static struct console ks8695_console = {
 642         .name           = SERIAL_KS8695_DEVNAME,
 643         .write          = ks8695_console_write,
 644         .device         = uart_console_device,
 645         .setup          = ks8695_console_setup,
 646         .flags          = CON_PRINTBUFFER,
 647         .index          = -1,
 648         .data           = &ks8695_reg,
 649 };
 650
 651 static int __init ks8695_console_init(void)
 652 {
 653         add_preferred_console(SERIAL_KS8695_DEVNAME, 0, NULL);
 654         register_console(&ks8695_console);
 655         return 0;
 656 }
 657
 658 console_initcall(ks8695_console_init);
 659
 660 #define KS8695_CONSOLE  &ks8695_console
 661 #else
 662 #define KS8695_CONSOLE  NULL
 663 #endif
 664
 665 static struct uart_driver ks8695_reg = {
 666         .owner                  = THIS_MODULE,
 667         .driver_name            = "serial_ks8695",
 668         .dev_name               = SERIAL_KS8695_DEVNAME,
 669         .major                  = SERIAL_KS8695_MAJOR,
 670         .minor                  = SERIAL_KS8695_MINOR,
 671         .nr                     = SERIAL_KS8695_NR,
 672         .cons                   = KS8695_CONSOLE,
 673 };
 674
 675 static int __init ks8695uart_init(void)
 676 {
 677         int i, ret;
 678
 679         printk(KERN_INFO "Serial: Micrel KS8695 UART driver\n");
 680
 681         ret = uart_register_driver(&ks8695_reg);
 682         if (ret)
 683                 return ret;
 684
 685         for (i = 0; i < SERIAL_KS8695_NR; i++)
 686                 uart_add_one_port(&ks8695_reg, &ks8695uart_ports[0]);
 687
 688         return 0;
 689 }
 690
 691 static void __exit ks8695uart_exit(void)
 692 {
 693         int i;
 694
 695         for (i = 0; i < SERIAL_KS8695_NR; i++)
 696                 uart_remove_one_port(&ks8695_reg, &ks8695uart_ports[0]);
 697         uart_unregister_driver(&ks8695_reg);
 698 }
 699
 700 module_init(ks8695uart_init);
 701 module_exit(ks8695uart_exit);
 702
 703 MODULE_DESCRIPTION("KS8695 serial port driver");
 704 MODULE_AUTHOR("Micrel Inc.");
 705 MODULE_LICENSE("GPL");