2 * TI DA830/OMAP L137 EVM board
4 * Author: Mark A. Greer <mgreer@mvista.com>
5 * Derived from: arch/arm/mach-davinci/board-dm644x-evm.c
7 * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
8 * the terms of the GNU General Public License version 2. This program
9 * is licensed "as is" without any warranty of any kind, whether express
12 #include <linux/kernel.h>
13 #include <linux/init.h>
14 #include <linux/console.h>
15 #include <linux/interrupt.h>
16 #include <linux/gpio.h>
17 #include <linux/platform_device.h>
18 #include <linux/i2c.h>
19 #include <linux/i2c/pcf857x.h>
20 #include <linux/i2c/at24.h>
21 #include <linux/mtd/mtd.h>
22 #include <linux/mtd/partitions.h>
23 #include <linux/spi/spi.h>
24 #include <linux/spi/flash.h>
26 #include <asm/mach-types.h>
27 #include <asm/mach/arch.h>
29 #include <mach/cp_intc.h>
31 #include <mach/nand.h>
32 #include <mach/da8xx.h>
34 #include <mach/aemif.h>
37 #define DA830_EVM_PHY_ID ""
39 * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4].
41 #define ON_BD_USB_DRV GPIO_TO_PIN(1, 15)
42 #define ON_BD_USB_OVC GPIO_TO_PIN(2, 4)
44 static const short da830_evm_usb11_pins
[] = {
45 DA830_GPIO1_15
, DA830_GPIO2_4
,
49 static da8xx_ocic_handler_t da830_evm_usb_ocic_handler
;
51 static int da830_evm_usb_set_power(unsigned port
, int on
)
53 gpio_set_value(ON_BD_USB_DRV
, on
);
57 static int da830_evm_usb_get_power(unsigned port
)
59 return gpio_get_value(ON_BD_USB_DRV
);
62 static int da830_evm_usb_get_oci(unsigned port
)
64 return !gpio_get_value(ON_BD_USB_OVC
);
67 static irqreturn_t
da830_evm_usb_ocic_irq(int, void *);
69 static int da830_evm_usb_ocic_notify(da8xx_ocic_handler_t handler
)
71 int irq
= gpio_to_irq(ON_BD_USB_OVC
);
74 if (handler
!= NULL
) {
75 da830_evm_usb_ocic_handler
= handler
;
77 error
= request_irq(irq
, da830_evm_usb_ocic_irq
, IRQF_DISABLED
|
78 IRQF_TRIGGER_RISING
| IRQF_TRIGGER_FALLING
,
79 "OHCI over-current indicator", NULL
);
81 printk(KERN_ERR
"%s: could not request IRQ to watch "
82 "over-current indicator changes\n", __func__
);
89 static struct da8xx_ohci_root_hub da830_evm_usb11_pdata
= {
90 .set_power
= da830_evm_usb_set_power
,
91 .get_power
= da830_evm_usb_get_power
,
92 .get_oci
= da830_evm_usb_get_oci
,
93 .ocic_notify
= da830_evm_usb_ocic_notify
,
95 /* TPS2065 switch @ 5V */
96 .potpgt
= (3 + 1) / 2, /* 3 ms max */
99 static irqreturn_t
da830_evm_usb_ocic_irq(int irq
, void *dev_id
)
101 da830_evm_usb_ocic_handler(&da830_evm_usb11_pdata
, 1);
105 static __init
void da830_evm_usb_init(void)
111 * Set up USB clock/mode in the CFGCHIP2 register.
112 * FYI: CFGCHIP2 is 0x0000ef00 initially.
114 cfgchip2
= __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG
));
116 /* USB2.0 PHY reference clock is 24 MHz */
117 cfgchip2
&= ~CFGCHIP2_REFFREQ
;
118 cfgchip2
|= CFGCHIP2_REFFREQ_24MHZ
;
121 * Select internal reference clock for USB 2.0 PHY
122 * and use it as a clock source for USB 1.1 PHY
123 * (this is the default setting anyway).
125 cfgchip2
&= ~CFGCHIP2_USB1PHYCLKMUX
;
126 cfgchip2
|= CFGCHIP2_USB2PHYCLKMUX
;
129 * We have to override VBUS/ID signals when MUSB is configured into the
130 * host-only mode -- ID pin will float if no cable is connected, so the
131 * controller won't be able to drive VBUS thinking that it's a B-device.
132 * Otherwise, we want to use the OTG mode and enable VBUS comparators.
134 cfgchip2
&= ~CFGCHIP2_OTGMODE
;
135 #ifdef CONFIG_USB_MUSB_HOST
136 cfgchip2
|= CFGCHIP2_FORCE_HOST
;
138 cfgchip2
|= CFGCHIP2_SESENDEN
| CFGCHIP2_VBDTCTEN
;
141 __raw_writel(cfgchip2
, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG
));
143 /* USB_REFCLKIN is not used. */
144 ret
= davinci_cfg_reg(DA830_USB0_DRVVBUS
);
146 pr_warning("%s: USB 2.0 PinMux setup failed: %d\n",
150 * TPS2065 switch @ 5V supplies 1 A (sustains 1.5 A),
151 * with the power on to power good time of 3 ms.
153 ret
= da8xx_register_usb20(1000, 3);
155 pr_warning("%s: USB 2.0 registration failed: %d\n",
159 ret
= davinci_cfg_reg_list(da830_evm_usb11_pins
);
161 pr_warning("%s: USB 1.1 PinMux setup failed: %d\n",
166 ret
= gpio_request(ON_BD_USB_DRV
, "ON_BD_USB_DRV");
168 printk(KERN_ERR
"%s: failed to request GPIO for USB 1.1 port "
169 "power control: %d\n", __func__
, ret
);
172 gpio_direction_output(ON_BD_USB_DRV
, 0);
174 ret
= gpio_request(ON_BD_USB_OVC
, "ON_BD_USB_OVC");
176 printk(KERN_ERR
"%s: failed to request GPIO for USB 1.1 port "
177 "over-current indicator: %d\n", __func__
, ret
);
180 gpio_direction_input(ON_BD_USB_OVC
);
182 ret
= da8xx_register_usb11(&da830_evm_usb11_pdata
);
184 pr_warning("%s: USB 1.1 registration failed: %d\n",
188 static struct davinci_uart_config da830_evm_uart_config __initdata
= {
189 .enabled_uarts
= 0x7,
192 static const short da830_evm_mcasp1_pins
[] = {
193 DA830_AHCLKX1
, DA830_ACLKX1
, DA830_AFSX1
, DA830_AHCLKR1
, DA830_AFSR1
,
194 DA830_AMUTE1
, DA830_AXR1_0
, DA830_AXR1_1
, DA830_AXR1_2
, DA830_AXR1_5
,
195 DA830_ACLKR1
, DA830_AXR1_6
, DA830_AXR1_7
, DA830_AXR1_8
, DA830_AXR1_10
,
200 static u8 da830_iis_serializer_direction
[] = {
201 RX_MODE
, INACTIVE_MODE
, INACTIVE_MODE
, INACTIVE_MODE
,
202 INACTIVE_MODE
, TX_MODE
, INACTIVE_MODE
, INACTIVE_MODE
,
203 INACTIVE_MODE
, INACTIVE_MODE
, INACTIVE_MODE
, INACTIVE_MODE
,
206 static struct snd_platform_data da830_evm_snd_data
= {
207 .tx_dma_offset
= 0x2000,
208 .rx_dma_offset
= 0x2000,
209 .op_mode
= DAVINCI_MCASP_IIS_MODE
,
210 .num_serializer
= ARRAY_SIZE(da830_iis_serializer_direction
),
212 .serial_dir
= da830_iis_serializer_direction
,
213 .asp_chan_q
= EVENTQ_0
,
214 .version
= MCASP_VERSION_2
,
220 * GPIO2[1] is used as MMC_SD_WP and GPIO2[2] as MMC_SD_INS.
222 static const short da830_evm_mmc_sd_pins
[] = {
223 DA830_MMCSD_DAT_0
, DA830_MMCSD_DAT_1
, DA830_MMCSD_DAT_2
,
224 DA830_MMCSD_DAT_3
, DA830_MMCSD_DAT_4
, DA830_MMCSD_DAT_5
,
225 DA830_MMCSD_DAT_6
, DA830_MMCSD_DAT_7
, DA830_MMCSD_CLK
,
226 DA830_MMCSD_CMD
, DA830_GPIO2_1
, DA830_GPIO2_2
,
230 #define DA830_MMCSD_WP_PIN GPIO_TO_PIN(2, 1)
231 #define DA830_MMCSD_CD_PIN GPIO_TO_PIN(2, 2)
233 static int da830_evm_mmc_get_ro(int index
)
235 return gpio_get_value(DA830_MMCSD_WP_PIN
);
238 static int da830_evm_mmc_get_cd(int index
)
240 return !gpio_get_value(DA830_MMCSD_CD_PIN
);
243 static struct davinci_mmc_config da830_evm_mmc_config
= {
244 .get_ro
= da830_evm_mmc_get_ro
,
245 .get_cd
= da830_evm_mmc_get_cd
,
247 .max_freq
= 50000000,
248 .caps
= MMC_CAP_MMC_HIGHSPEED
| MMC_CAP_SD_HIGHSPEED
,
249 .version
= MMC_CTLR_VERSION_2
,
252 static inline void da830_evm_init_mmc(void)
256 ret
= davinci_cfg_reg_list(da830_evm_mmc_sd_pins
);
258 pr_warning("da830_evm_init: mmc/sd mux setup failed: %d\n",
263 ret
= gpio_request(DA830_MMCSD_WP_PIN
, "MMC WP");
265 pr_warning("da830_evm_init: can not open GPIO %d\n",
269 gpio_direction_input(DA830_MMCSD_WP_PIN
);
271 ret
= gpio_request(DA830_MMCSD_CD_PIN
, "MMC CD\n");
273 pr_warning("da830_evm_init: can not open GPIO %d\n",
277 gpio_direction_input(DA830_MMCSD_CD_PIN
);
279 ret
= da8xx_register_mmcsd0(&da830_evm_mmc_config
);
281 pr_warning("da830_evm_init: mmc/sd registration failed: %d\n",
283 gpio_free(DA830_MMCSD_WP_PIN
);
288 * UI board NAND/NOR flashes only use 8-bit data bus.
290 static const short da830_evm_emif25_pins
[] = {
291 DA830_EMA_D_0
, DA830_EMA_D_1
, DA830_EMA_D_2
, DA830_EMA_D_3
,
292 DA830_EMA_D_4
, DA830_EMA_D_5
, DA830_EMA_D_6
, DA830_EMA_D_7
,
293 DA830_EMA_A_0
, DA830_EMA_A_1
, DA830_EMA_A_2
, DA830_EMA_A_3
,
294 DA830_EMA_A_4
, DA830_EMA_A_5
, DA830_EMA_A_6
, DA830_EMA_A_7
,
295 DA830_EMA_A_8
, DA830_EMA_A_9
, DA830_EMA_A_10
, DA830_EMA_A_11
,
296 DA830_EMA_A_12
, DA830_EMA_BA_0
, DA830_EMA_BA_1
, DA830_NEMA_WE
,
297 DA830_NEMA_CS_2
, DA830_NEMA_CS_3
, DA830_NEMA_OE
, DA830_EMA_WAIT_0
,
301 #if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE)
307 #ifdef CONFIG_DA830_UI_NAND
308 static struct mtd_partition da830_evm_nand_partitions
[] = {
309 /* bootloader (U-Boot, etc) in first sector */
311 .name
= "bootloader",
314 .mask_flags
= MTD_WRITEABLE
, /* force read-only */
316 /* bootloader params in the next sector */
319 .offset
= MTDPART_OFS_APPEND
,
321 .mask_flags
= MTD_WRITEABLE
, /* force read-only */
326 .offset
= MTDPART_OFS_APPEND
,
332 .name
= "filesystem",
333 .offset
= MTDPART_OFS_APPEND
,
334 .size
= MTDPART_SIZ_FULL
,
339 /* flash bbt decriptors */
340 static uint8_t da830_evm_nand_bbt_pattern
[] = { 'B', 'b', 't', '0' };
341 static uint8_t da830_evm_nand_mirror_pattern
[] = { '1', 't', 'b', 'B' };
343 static struct nand_bbt_descr da830_evm_nand_bbt_main_descr
= {
344 .options
= NAND_BBT_LASTBLOCK
| NAND_BBT_CREATE
|
345 NAND_BBT_WRITE
| NAND_BBT_2BIT
|
346 NAND_BBT_VERSION
| NAND_BBT_PERCHIP
,
351 .pattern
= da830_evm_nand_bbt_pattern
354 static struct nand_bbt_descr da830_evm_nand_bbt_mirror_descr
= {
355 .options
= NAND_BBT_LASTBLOCK
| NAND_BBT_CREATE
|
356 NAND_BBT_WRITE
| NAND_BBT_2BIT
|
357 NAND_BBT_VERSION
| NAND_BBT_PERCHIP
,
362 .pattern
= da830_evm_nand_mirror_pattern
365 static struct davinci_aemif_timing da830_evm_nandflash_timing
= {
375 static struct davinci_nand_pdata da830_evm_nand_pdata
= {
376 .parts
= da830_evm_nand_partitions
,
377 .nr_parts
= ARRAY_SIZE(da830_evm_nand_partitions
),
378 .ecc_mode
= NAND_ECC_HW
,
380 .options
= NAND_USE_FLASH_BBT
,
381 .bbt_td
= &da830_evm_nand_bbt_main_descr
,
382 .bbt_md
= &da830_evm_nand_bbt_mirror_descr
,
383 .timing
= &da830_evm_nandflash_timing
,
386 static struct resource da830_evm_nand_resources
[] = {
387 [0] = { /* First memory resource is NAND I/O window */
388 .start
= DA8XX_AEMIF_CS3_BASE
,
389 .end
= DA8XX_AEMIF_CS3_BASE
+ PAGE_SIZE
- 1,
390 .flags
= IORESOURCE_MEM
,
392 [1] = { /* Second memory resource is AEMIF control registers */
393 .start
= DA8XX_AEMIF_CTL_BASE
,
394 .end
= DA8XX_AEMIF_CTL_BASE
+ SZ_32K
- 1,
395 .flags
= IORESOURCE_MEM
,
399 static struct platform_device da830_evm_nand_device
= {
400 .name
= "davinci_nand",
403 .platform_data
= &da830_evm_nand_pdata
,
405 .num_resources
= ARRAY_SIZE(da830_evm_nand_resources
),
406 .resource
= da830_evm_nand_resources
,
409 static inline void da830_evm_init_nand(int mux_mode
)
414 pr_warning("WARNING: both MMC/SD and NAND are "
415 "enabled, but they share AEMIF pins.\n"
416 "\tDisable MMC/SD for NAND support.\n");
420 ret
= davinci_cfg_reg_list(da830_evm_emif25_pins
);
422 pr_warning("da830_evm_init: emif25 mux setup failed: %d\n",
425 ret
= platform_device_register(&da830_evm_nand_device
);
427 pr_warning("da830_evm_init: NAND device not registered.\n");
429 gpio_direction_output(mux_mode
, 1);
432 static inline void da830_evm_init_nand(int mux_mode
) { }
435 #ifdef CONFIG_DA830_UI_LCD
436 static inline void da830_evm_init_lcdc(int mux_mode
)
440 ret
= davinci_cfg_reg_list(da830_lcdcntl_pins
);
442 pr_warning("da830_evm_init: lcdcntl mux setup failed: %d\n",
445 ret
= da8xx_register_lcdc(&sharp_lcd035q3dg01_pdata
);
447 pr_warning("da830_evm_init: lcd setup failed: %d\n", ret
);
449 gpio_direction_output(mux_mode
, 0);
452 static inline void da830_evm_init_lcdc(int mux_mode
) { }
455 static struct at24_platform_data da830_evm_i2c_eeprom_info
= {
456 .byte_len
= SZ_256K
/ 8,
458 .flags
= AT24_FLAG_ADDR16
,
459 .setup
= davinci_get_mac_addr
,
460 .context
= (void *)0x7f00,
463 static int __init
da830_evm_ui_expander_setup(struct i2c_client
*client
,
464 int gpio
, unsigned ngpio
, void *context
)
466 gpio_request(gpio
+ 6, "UI MUX_MODE");
468 /* Drive mux mode low to match the default without UI card */
469 gpio_direction_output(gpio
+ 6, 0);
471 da830_evm_init_lcdc(gpio
+ 6);
473 da830_evm_init_nand(gpio
+ 6);
478 static int da830_evm_ui_expander_teardown(struct i2c_client
*client
, int gpio
,
479 unsigned ngpio
, void *context
)
485 static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info
= {
486 .gpio_base
= DAVINCI_N_GPIO
,
487 .setup
= da830_evm_ui_expander_setup
,
488 .teardown
= da830_evm_ui_expander_teardown
,
491 static struct i2c_board_info __initdata da830_evm_i2c_devices
[] = {
493 I2C_BOARD_INFO("24c256", 0x50),
494 .platform_data
= &da830_evm_i2c_eeprom_info
,
497 I2C_BOARD_INFO("tlv320aic3x", 0x18),
500 I2C_BOARD_INFO("pcf8574", 0x3f),
501 .platform_data
= &da830_evm_ui_expander_info
,
505 static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata
= {
506 .bus_freq
= 100, /* kHz */
507 .bus_delay
= 0, /* usec */
511 * The following EDMA channels/slots are not being used by drivers (for
512 * example: Timer, GPIO, UART events etc) on da830/omap-l137 EVM, hence
513 * they are being reserved for codecs on the DSP side.
515 static const s16 da830_dma_rsv_chans
[][2] = {
516 /* (offset, number) */
524 static const s16 da830_dma_rsv_slots
[][2] = {
525 /* (offset, number) */
533 static struct edma_rsv_info da830_edma_rsv
[] = {
535 .rsv_chans
= da830_dma_rsv_chans
,
536 .rsv_slots
= da830_dma_rsv_slots
,
540 static struct mtd_partition da830evm_spiflash_part
[] = {
545 .mask_flags
= MTD_WRITEABLE
,
549 .offset
= MTDPART_OFS_APPEND
,
550 .size
= SZ_16K
+ SZ_8K
,
551 .mask_flags
= MTD_WRITEABLE
,
555 .offset
= MTDPART_OFS_APPEND
,
556 .size
= SZ_256K
- SZ_32K
,
557 .mask_flags
= MTD_WRITEABLE
,
560 .name
= "U-Boot-Environment",
561 .offset
= MTDPART_OFS_APPEND
,
567 .offset
= MTDPART_OFS_APPEND
,
568 .size
= MTDPART_SIZ_FULL
,
573 static struct flash_platform_data da830evm_spiflash_data
= {
575 .parts
= da830evm_spiflash_part
,
576 .nr_parts
= ARRAY_SIZE(da830evm_spiflash_part
),
580 static struct davinci_spi_config da830evm_spiflash_cfg
= {
581 .io_type
= SPI_IO_TYPE_DMA
,
586 static struct spi_board_info da830evm_spi_info
[] = {
588 .modalias
= "m25p80",
589 .platform_data
= &da830evm_spiflash_data
,
590 .controller_data
= &da830evm_spiflash_cfg
,
592 .max_speed_hz
= 30000000,
598 static __init
void da830_evm_init(void)
600 struct davinci_soc_info
*soc_info
= &davinci_soc_info
;
603 ret
= da830_register_edma(da830_edma_rsv
);
605 pr_warning("da830_evm_init: edma registration failed: %d\n",
608 ret
= davinci_cfg_reg_list(da830_i2c0_pins
);
610 pr_warning("da830_evm_init: i2c0 mux setup failed: %d\n",
613 ret
= da8xx_register_i2c(0, &da830_evm_i2c_0_pdata
);
615 pr_warning("da830_evm_init: i2c0 registration failed: %d\n",
618 da830_evm_usb_init();
620 soc_info
->emac_pdata
->rmii_en
= 1;
621 soc_info
->emac_pdata
->phy_id
= DA830_EVM_PHY_ID
;
623 ret
= davinci_cfg_reg_list(da830_cpgmac_pins
);
625 pr_warning("da830_evm_init: cpgmac mux setup failed: %d\n",
628 ret
= da8xx_register_emac();
630 pr_warning("da830_evm_init: emac registration failed: %d\n",
633 ret
= da8xx_register_watchdog();
635 pr_warning("da830_evm_init: watchdog registration failed: %d\n",
638 davinci_serial_init(&da830_evm_uart_config
);
639 i2c_register_board_info(1, da830_evm_i2c_devices
,
640 ARRAY_SIZE(da830_evm_i2c_devices
));
642 ret
= davinci_cfg_reg_list(da830_evm_mcasp1_pins
);
644 pr_warning("da830_evm_init: mcasp1 mux setup failed: %d\n",
647 da8xx_register_mcasp(1, &da830_evm_snd_data
);
649 da830_evm_init_mmc();
651 ret
= da8xx_register_rtc();
653 pr_warning("da830_evm_init: rtc setup failed: %d\n", ret
);
655 ret
= da8xx_register_spi(0, da830evm_spi_info
,
656 ARRAY_SIZE(da830evm_spi_info
));
658 pr_warning("da830_evm_init: spi 0 registration failed: %d\n",
662 #ifdef CONFIG_SERIAL_8250_CONSOLE
663 static int __init
da830_evm_console_init(void)
665 if (!machine_is_davinci_da830_evm())
668 return add_preferred_console("ttyS", 2, "115200");
670 console_initcall(da830_evm_console_init
);
673 static void __init
da830_evm_map_io(void)
678 MACHINE_START(DAVINCI_DA830_EVM
, "DaVinci DA830/OMAP-L137/AM17x EVM")
679 .boot_params
= (DA8XX_DDR_BASE
+ 0x100),
680 .map_io
= da830_evm_map_io
,
681 .init_irq
= cp_intc_init
,
682 .timer
= &davinci_timer
,
683 .init_machine
= da830_evm_init
,