kvm tools, setup: Create private directory
[linux-2.6/next.git] / arch / frv / kernel / irq-mb93493.c
blob4d034c7840c9270f26359cb32378cab20e321b18
1 /* irq-mb93493.c: MB93493 companion chip interrupt handler
3 * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
4 * Written by David Howells (dhowells@redhat.com)
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
12 #include <linux/ptrace.h>
13 #include <linux/errno.h>
14 #include <linux/signal.h>
15 #include <linux/sched.h>
16 #include <linux/ioport.h>
17 #include <linux/interrupt.h>
18 #include <linux/init.h>
19 #include <linux/irq.h>
20 #include <linux/bitops.h>
22 #include <asm/io.h>
23 #include <asm/system.h>
24 #include <asm/delay.h>
25 #include <asm/irq.h>
26 #include <asm/irc-regs.h>
27 #include <asm/mb93493-irqs.h>
28 #include <asm/mb93493-regs.h>
30 #define IRQ_ROUTE_ONE(X) (X##_ROUTE << (X - IRQ_BASE_MB93493))
32 #define IRQ_ROUTING \
33 (IRQ_ROUTE_ONE(IRQ_MB93493_VDC) | \
34 IRQ_ROUTE_ONE(IRQ_MB93493_VCC) | \
35 IRQ_ROUTE_ONE(IRQ_MB93493_AUDIO_OUT) | \
36 IRQ_ROUTE_ONE(IRQ_MB93493_I2C_0) | \
37 IRQ_ROUTE_ONE(IRQ_MB93493_I2C_1) | \
38 IRQ_ROUTE_ONE(IRQ_MB93493_USB) | \
39 IRQ_ROUTE_ONE(IRQ_MB93493_LOCAL_BUS) | \
40 IRQ_ROUTE_ONE(IRQ_MB93493_PCMCIA) | \
41 IRQ_ROUTE_ONE(IRQ_MB93493_GPIO) | \
42 IRQ_ROUTE_ONE(IRQ_MB93493_AUDIO_IN))
45 * daughter board PIC operations
46 * - there is no way to ACK interrupts in the MB93493 chip
48 static void frv_mb93493_mask(struct irq_data *d)
50 uint32_t iqsr;
51 volatile void *piqsr;
53 if (IRQ_ROUTING & (1 << (d->irq - IRQ_BASE_MB93493)))
54 piqsr = __addr_MB93493_IQSR(1);
55 else
56 piqsr = __addr_MB93493_IQSR(0);
58 iqsr = readl(piqsr);
59 iqsr &= ~(1 << (d->irq - IRQ_BASE_MB93493 + 16));
60 writel(iqsr, piqsr);
63 static void frv_mb93493_ack(struct irq_data *d)
67 static void frv_mb93493_unmask(struct irq_data *d)
69 uint32_t iqsr;
70 volatile void *piqsr;
72 if (IRQ_ROUTING & (1 << (d->irq - IRQ_BASE_MB93493)))
73 piqsr = __addr_MB93493_IQSR(1);
74 else
75 piqsr = __addr_MB93493_IQSR(0);
77 iqsr = readl(piqsr);
78 iqsr |= 1 << (d->irq - IRQ_BASE_MB93493 + 16);
79 writel(iqsr, piqsr);
82 static struct irq_chip frv_mb93493_pic = {
83 .name = "mb93093",
84 .irq_ack = frv_mb93493_ack,
85 .irq_mask = frv_mb93493_mask,
86 .irq_mask_ack = frv_mb93493_mask,
87 .irq_unmask = frv_mb93493_unmask,
91 * MB93493 PIC interrupt handler
93 static irqreturn_t mb93493_interrupt(int irq, void *_piqsr)
95 volatile void *piqsr = _piqsr;
96 uint32_t iqsr;
98 iqsr = readl(piqsr);
99 iqsr = iqsr & (iqsr >> 16) & 0xffff;
101 /* poll all the triggered IRQs */
102 while (iqsr) {
103 int irq;
105 asm("scan %1,gr0,%0" : "=r"(irq) : "r"(iqsr));
106 irq = 31 - irq;
107 iqsr &= ~(1 << irq);
109 generic_handle_irq(IRQ_BASE_MB93493 + irq);
112 return IRQ_HANDLED;
116 * define an interrupt action for each MB93493 PIC output
117 * - use dev_id to indicate the MB93493 PIC input to output mappings
119 static struct irqaction mb93493_irq[2] = {
120 [0] = {
121 .handler = mb93493_interrupt,
122 .flags = IRQF_DISABLED | IRQF_SHARED,
123 .name = "mb93493.0",
124 .dev_id = (void *) __addr_MB93493_IQSR(0),
126 [1] = {
127 .handler = mb93493_interrupt,
128 .flags = IRQF_DISABLED | IRQF_SHARED,
129 .name = "mb93493.1",
130 .dev_id = (void *) __addr_MB93493_IQSR(1),
135 * initialise the motherboard MB93493's PIC
137 void __init mb93493_init(void)
139 int irq;
141 for (irq = IRQ_BASE_MB93493 + 0; irq <= IRQ_BASE_MB93493 + 10; irq++)
142 irq_set_chip_and_handler(irq, &frv_mb93493_pic,
143 handle_edge_irq);
145 /* the MB93493 drives external IRQ inputs on the CPU PIC */
146 setup_irq(IRQ_CPU_MB93493_0, &mb93493_irq[0]);
147 setup_irq(IRQ_CPU_MB93493_1, &mb93493_irq[1]);