kvm tools, setup: Create private directory
[linux-2.6/next.git] / arch / mips / include / asm / mach-db1x00 / bcsr.h
blob618d2de02ed35c638a7fa28d97823ca439f83bea
1 /*
2 * bcsr.h -- Db1xxx/Pb1xxx Devboard CPLD registers ("BCSR") abstraction.
4 * All Alchemy development boards (except, of course, the weird PB1000)
5 * have a few registers in a CPLD with standardised layout; they mostly
6 * only differ in base address and bit meanings in the RESETS and BOARD
7 * registers.
9 * All data taken from the official AMD board documentation sheets.
12 #ifndef _DB1XXX_BCSR_H_
13 #define _DB1XXX_BCSR_H_
16 /* BCSR base addresses on various boards. BCSR base 2 refers to the
17 * physical address of the first HEXLEDS register, which is usually
18 * a variable offset from the WHOAMI register.
21 /* DB1000, DB1100, DB1500, PB1100, PB1500 */
22 #define DB1000_BCSR_PHYS_ADDR 0x0E000000
23 #define DB1000_BCSR_HEXLED_OFS 0x01000000
25 #define DB1550_BCSR_PHYS_ADDR 0x0F000000
26 #define DB1550_BCSR_HEXLED_OFS 0x00400000
28 #define PB1550_BCSR_PHYS_ADDR 0x0F000000
29 #define PB1550_BCSR_HEXLED_OFS 0x00800000
31 #define DB1200_BCSR_PHYS_ADDR 0x19800000
32 #define DB1200_BCSR_HEXLED_OFS 0x00400000
34 #define PB1200_BCSR_PHYS_ADDR 0x0D800000
35 #define PB1200_BCSR_HEXLED_OFS 0x00400000
38 enum bcsr_id {
39 /* BCSR base 1 */
40 BCSR_WHOAMI = 0,
41 BCSR_STATUS,
42 BCSR_SWITCHES,
43 BCSR_RESETS,
44 BCSR_PCMCIA,
45 BCSR_BOARD,
46 BCSR_LEDS,
47 BCSR_SYSTEM,
48 /* Au1200/1300 based boards */
49 BCSR_INTCLR,
50 BCSR_INTSET,
51 BCSR_MASKCLR,
52 BCSR_MASKSET,
53 BCSR_SIGSTAT,
54 BCSR_INTSTAT,
56 /* BCSR base 2 */
57 BCSR_HEXLEDS,
58 BCSR_RSVD1,
59 BCSR_HEXCLEAR,
61 BCSR_CNT,
64 /* register offsets, valid for all Db1xxx/Pb1xxx boards */
65 #define BCSR_REG_WHOAMI 0x00
66 #define BCSR_REG_STATUS 0x04
67 #define BCSR_REG_SWITCHES 0x08
68 #define BCSR_REG_RESETS 0x0c
69 #define BCSR_REG_PCMCIA 0x10
70 #define BCSR_REG_BOARD 0x14
71 #define BCSR_REG_LEDS 0x18
72 #define BCSR_REG_SYSTEM 0x1c
73 /* Au1200/Au1300 based boards: CPLD IRQ muxer */
74 #define BCSR_REG_INTCLR 0x20
75 #define BCSR_REG_INTSET 0x24
76 #define BCSR_REG_MASKCLR 0x28
77 #define BCSR_REG_MASKSET 0x2c
78 #define BCSR_REG_SIGSTAT 0x30
79 #define BCSR_REG_INTSTAT 0x34
81 /* hexled control, offset from BCSR base 2 */
82 #define BCSR_REG_HEXLEDS 0x00
83 #define BCSR_REG_HEXCLEAR 0x08
86 * Register Bits and Pieces.
88 #define BCSR_WHOAMI_DCID(x) ((x) & 0xf)
89 #define BCSR_WHOAMI_CPLD(x) (((x) >> 4) & 0xf)
90 #define BCSR_WHOAMI_BOARD(x) (((x) >> 8) & 0xf)
92 /* register "WHOAMI" bits 11:8 identify the board */
93 enum bcsr_whoami_boards {
94 BCSR_WHOAMI_PB1500 = 1,
95 BCSR_WHOAMI_PB1500R2,
96 BCSR_WHOAMI_PB1100,
97 BCSR_WHOAMI_DB1000,
98 BCSR_WHOAMI_DB1100,
99 BCSR_WHOAMI_DB1500,
100 BCSR_WHOAMI_DB1550,
101 BCSR_WHOAMI_PB1550_DDR,
102 BCSR_WHOAMI_PB1550 = BCSR_WHOAMI_PB1550_DDR,
103 BCSR_WHOAMI_PB1550_SDR,
104 BCSR_WHOAMI_PB1200_DDR1,
105 BCSR_WHOAMI_PB1200 = BCSR_WHOAMI_PB1200_DDR1,
106 BCSR_WHOAMI_PB1200_DDR2,
107 BCSR_WHOAMI_DB1200,
110 /* STATUS reg. Unless otherwise noted, they're valid on all boards.
111 * PB1200 = DB1200.
113 #define BCSR_STATUS_PC0VS 0x0003
114 #define BCSR_STATUS_PC1VS 0x000C
115 #define BCSR_STATUS_PC0FI 0x0010
116 #define BCSR_STATUS_PC1FI 0x0020
117 #define BCSR_STATUS_PB1550_SWAPBOOT 0x0040
118 #define BCSR_STATUS_SRAMWIDTH 0x0080
119 #define BCSR_STATUS_FLASHBUSY 0x0100
120 #define BCSR_STATUS_ROMBUSY 0x0400
121 #define BCSR_STATUS_SD0WP 0x0400 /* DB1200 */
122 #define BCSR_STATUS_SD1WP 0x0800
123 #define BCSR_STATUS_USBOTGID 0x0800 /* PB/DB1550 */
124 #define BCSR_STATUS_DB1000_SWAPBOOT 0x2000
125 #define BCSR_STATUS_DB1200_SWAPBOOT 0x0040 /* DB1200 */
126 #define BCSR_STATUS_IDECBLID 0x0200 /* DB1200 */
127 #define BCSR_STATUS_DB1200_U0RXD 0x1000 /* DB1200 */
128 #define BCSR_STATUS_DB1200_U1RXD 0x2000 /* DB1200 */
129 #define BCSR_STATUS_FLASHDEN 0xC000
130 #define BCSR_STATUS_DB1550_U0RXD 0x1000 /* DB1550 */
131 #define BCSR_STATUS_DB1550_U3RXD 0x2000 /* DB1550 */
132 #define BCSR_STATUS_PB1550_U0RXD 0x1000 /* PB1550 */
133 #define BCSR_STATUS_PB1550_U1RXD 0x2000 /* PB1550 */
134 #define BCSR_STATUS_PB1550_U3RXD 0x8000 /* PB1550 */
137 /* DB/PB1000,1100,1500,1550 */
138 #define BCSR_RESETS_PHY0 0x0001
139 #define BCSR_RESETS_PHY1 0x0002
140 #define BCSR_RESETS_DC 0x0004
141 #define BCSR_RESETS_FIR_SEL 0x2000
142 #define BCSR_RESETS_IRDA_MODE_MASK 0xC000
143 #define BCSR_RESETS_IRDA_MODE_FULL 0x0000
144 #define BCSR_RESETS_PB1550_WSCFSM 0x2000
145 #define BCSR_RESETS_IRDA_MODE_OFF 0x4000
146 #define BCSR_RESETS_IRDA_MODE_2_3 0x8000
147 #define BCSR_RESETS_IRDA_MODE_1_3 0xC000
148 #define BCSR_RESETS_DMAREQ 0x8000 /* PB1550 */
150 #define BCSR_BOARD_PCIM66EN 0x0001
151 #define BCSR_BOARD_SD0PWR 0x0040
152 #define BCSR_BOARD_SD1PWR 0x0080
153 #define BCSR_BOARD_PCIM33 0x0100
154 #define BCSR_BOARD_PCIEXTARB 0x0200
155 #define BCSR_BOARD_GPIO200RST 0x0400
156 #define BCSR_BOARD_PCICLKOUT 0x0800
157 #define BCSR_BOARD_PCICFG 0x1000
158 #define BCSR_BOARD_SPISEL 0x4000 /* PB/DB1550 */
159 #define BCSR_BOARD_SD0WP 0x4000 /* DB1100 */
160 #define BCSR_BOARD_SD1WP 0x8000 /* DB1100 */
163 /* DB/PB1200 */
164 #define BCSR_RESETS_ETH 0x0001
165 #define BCSR_RESETS_CAMERA 0x0002
166 #define BCSR_RESETS_DC 0x0004
167 #define BCSR_RESETS_IDE 0x0008
168 #define BCSR_RESETS_TV 0x0010 /* DB1200 */
169 /* Not resets but in the same register */
170 #define BCSR_RESETS_PWMR1MUX 0x0800 /* DB1200 */
171 #define BCSR_RESETS_PB1200_WSCFSM 0x0800 /* PB1200 */
172 #define BCSR_RESETS_PSC0MUX 0x1000
173 #define BCSR_RESETS_PSC1MUX 0x2000
174 #define BCSR_RESETS_SPISEL 0x4000
175 #define BCSR_RESETS_SD1MUX 0x8000 /* PB1200 */
177 #define BCSR_BOARD_LCDVEE 0x0001
178 #define BCSR_BOARD_LCDVDD 0x0002
179 #define BCSR_BOARD_LCDBL 0x0004
180 #define BCSR_BOARD_CAMSNAP 0x0010
181 #define BCSR_BOARD_CAMPWR 0x0020
182 #define BCSR_BOARD_SD0PWR 0x0040
185 #define BCSR_SWITCHES_DIP 0x00FF
186 #define BCSR_SWITCHES_DIP_1 0x0080
187 #define BCSR_SWITCHES_DIP_2 0x0040
188 #define BCSR_SWITCHES_DIP_3 0x0020
189 #define BCSR_SWITCHES_DIP_4 0x0010
190 #define BCSR_SWITCHES_DIP_5 0x0008
191 #define BCSR_SWITCHES_DIP_6 0x0004
192 #define BCSR_SWITCHES_DIP_7 0x0002
193 #define BCSR_SWITCHES_DIP_8 0x0001
194 #define BCSR_SWITCHES_ROTARY 0x0F00
197 #define BCSR_PCMCIA_PC0VPP 0x0003
198 #define BCSR_PCMCIA_PC0VCC 0x000C
199 #define BCSR_PCMCIA_PC0DRVEN 0x0010
200 #define BCSR_PCMCIA_PC0RST 0x0080
201 #define BCSR_PCMCIA_PC1VPP 0x0300
202 #define BCSR_PCMCIA_PC1VCC 0x0C00
203 #define BCSR_PCMCIA_PC1DRVEN 0x1000
204 #define BCSR_PCMCIA_PC1RST 0x8000
207 #define BCSR_LEDS_DECIMALS 0x0003
208 #define BCSR_LEDS_LED0 0x0100
209 #define BCSR_LEDS_LED1 0x0200
210 #define BCSR_LEDS_LED2 0x0400
211 #define BCSR_LEDS_LED3 0x0800
214 #define BCSR_SYSTEM_RESET 0x8000 /* clear to reset */
215 #define BCSR_SYSTEM_PWROFF 0x4000 /* set to power off */
216 #define BCSR_SYSTEM_VDDI 0x001F /* PB1xxx boards */
221 /* initialize BCSR for a board. Provide the PHYSICAL addresses of both
222 * BCSR spaces.
224 void __init bcsr_init(unsigned long bcsr1_phys, unsigned long bcsr2_phys);
226 /* read a board register */
227 unsigned short bcsr_read(enum bcsr_id reg);
229 /* write to a board register */
230 void bcsr_write(enum bcsr_id reg, unsigned short val);
232 /* modify a register. clear bits set in 'clr', set bits set in 'set' */
233 void bcsr_mod(enum bcsr_id reg, unsigned short clr, unsigned short set);
235 /* install CPLD IRQ demuxer (DB1200/PB1200) */
236 void __init bcsr_init_irq(int csc_start, int csc_end, int hook_irq);
238 #endif