arch/powerpc/boot/ppcboot-hotfoot.h

   1 /*
   2  * This interface is used for compatibility with old U-boots *ONLY*.
   3  * Please do not imitate or extend this.
   4  */
   5
   6 /*
   7  * Unfortunately, the ESTeem Hotfoot board uses a mangled version of
   8  * ppcboot.h for historical reasons, and in the interest of having a
   9  * mainline kernel boot on the production board+bootloader, this was the
  10  * least-offensive solution.  Please direct all flames to:
  11  *
  12  *  Solomon Peachy <solomon@linux-wlan.com>
  13  *
  14  * (This header is identical to ppcboot.h except for the
  15  *  TARGET_HOTFOOT bits)
  16  */
  17
  18 /*
  19  * (C) Copyright 2000, 2001
  20  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  21  *
  22  * This program is free software; you can redistribute it and/or
  23  * modify it under the terms of the GNU General Public License as
  24  * published by the Free Software Foundation; either version 2 of
  25  * the License, or (at your option) any later version.
  26  *
  27  * This program is distributed in the hope that it will be useful,
  28  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  29  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  30  * GNU General Public License for more details.
  31  *
  32  * You should have received a copy of the GNU General Public License
  33  * along with this program; if not, write to the Free Software
  34  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  35  * MA 02111-1307 USA
  36  */
  37
  38 #ifndef __PPCBOOT_H__
  39 #define __PPCBOOT_H__
  40
  41 /*
  42  * Board information passed to kernel from PPCBoot
  43  *
  44  * include/asm-ppc/ppcboot.h
  45  */
  46
  47 #include "types.h"
  48
  49 typedef struct bd_info {
  50         unsigned long   bi_memstart;    /* start of DRAM memory */
  51         unsigned long   bi_memsize;     /* size  of DRAM memory in bytes */
  52         unsigned long   bi_flashstart;  /* start of FLASH memory */
  53         unsigned long   bi_flashsize;   /* size  of FLASH memory */
  54         unsigned long   bi_flashoffset; /* reserved area for startup monitor */
  55         unsigned long   bi_sramstart;   /* start of SRAM memory */
  56         unsigned long   bi_sramsize;    /* size  of SRAM memory */
  57 #if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\
  58         defined(TARGET_83xx)
  59         unsigned long   bi_immr_base;   /* base of IMMR register */
  60 #endif
  61 #if defined(TARGET_PPC_MPC52xx)
  62         unsigned long   bi_mbar_base;   /* base of internal registers */
  63 #endif
  64         unsigned long   bi_bootflags;   /* boot / reboot flag (for LynxOS) */
  65         unsigned long   bi_ip_addr;     /* IP Address */
  66         unsigned char   bi_enetaddr[6]; /* Ethernet address */
  67 #if defined(TARGET_HOTFOOT)
  68         /* second onboard ethernet port */
  69         unsigned char   bi_enet1addr[6];
  70 #define HAVE_ENET1ADDR
  71 #endif /* TARGET_HOOTFOOT */
  72         unsigned short  bi_ethspeed;    /* Ethernet speed in Mbps */
  73         unsigned long   bi_intfreq;     /* Internal Freq, in MHz */
  74         unsigned long   bi_busfreq;     /* Bus Freq, in MHz */
  75 #if defined(TARGET_CPM2)
  76         unsigned long   bi_cpmfreq;     /* CPM_CLK Freq, in MHz */
  77         unsigned long   bi_brgfreq;     /* BRG_CLK Freq, in MHz */
  78         unsigned long   bi_sccfreq;     /* SCC_CLK Freq, in MHz */
  79         unsigned long   bi_vco;         /* VCO Out from PLL, in MHz */
  80 #endif
  81 #if defined(TARGET_PPC_MPC52xx)
  82         unsigned long   bi_ipbfreq;     /* IPB Bus Freq, in MHz */
  83         unsigned long   bi_pcifreq;     /* PCI Bus Freq, in MHz */
  84 #endif
  85         unsigned long   bi_baudrate;    /* Console Baudrate */
  86 #if defined(TARGET_4xx)
  87         unsigned char   bi_s_version[4];        /* Version of this structure */
  88         unsigned char   bi_r_version[32];       /* Version of the ROM (IBM) */
  89         unsigned int    bi_procfreq;    /* CPU (Internal) Freq, in Hz */
  90         unsigned int    bi_plb_busfreq; /* PLB Bus speed, in Hz */
  91         unsigned int    bi_pci_busfreq; /* PCI Bus speed, in Hz */
  92         unsigned char   bi_pci_enetaddr[6];     /* PCI Ethernet MAC address */
  93 #endif
  94 #if defined(TARGET_HOTFOOT)
  95         unsigned int     bi_pllouta_freq;       /* PLL OUTA speed, in Hz */
  96 #endif
  97 #if defined(TARGET_HYMOD)
  98         hymod_conf_t    bi_hymod_conf;  /* hymod configuration information */
  99 #endif
 100 #if defined(TARGET_EVB64260) || defined(TARGET_405EP) || defined(TARGET_44x) || \
 101         defined(TARGET_85xx) || defined(TARGET_83xx) || defined(TARGET_HAS_ETH1)
 102         /* second onboard ethernet port */
 103         unsigned char   bi_enet1addr[6];
 104 #define HAVE_ENET1ADDR
 105 #endif
 106 #if defined(TARGET_EVB64260) || defined(TARGET_440GX) || \
 107     defined(TARGET_85xx) || defined(TARGET_HAS_ETH2)
 108         /* third onboard ethernet ports */
 109         unsigned char   bi_enet2addr[6];
 110 #define HAVE_ENET2ADDR
 111 #endif
 112 #if defined(TARGET_440GX) || defined(TARGET_HAS_ETH3)
 113         /* fourth onboard ethernet ports */
 114         unsigned char   bi_enet3addr[6];
 115 #define HAVE_ENET3ADDR
 116 #endif
 117 #if defined(TARGET_HOTFOOT)
 118         int             bi_phynum[2];           /* Determines phy mapping */
 119         int             bi_phymode[2];          /* Determines phy mode */
 120 #endif
 121 #if defined(TARGET_4xx)
 122         unsigned int    bi_opbfreq;             /* OB clock in Hz */
 123         int             bi_iic_fast[2];         /* Use fast i2c mode */
 124 #endif
 125 #if defined(TARGET_440GX)
 126         int             bi_phynum[4];           /* phy mapping */
 127         int             bi_phymode[4];          /* phy mode */
 128 #endif
 129 } bd_t;
 130
 131 #define bi_tbfreq       bi_intfreq
 132
 133 #endif  /* __PPCBOOT_H__ */