kvm tools, setup: Create private directory
[linux-2.6/next.git] / arch / sh / boards / board-polaris.c
blob594866356c247cbc6ecb2aa10943443f09ca2030
1 /*
2 * June 2006 steve.glendinning@smsc.com
4 * Polaris-specific resource declaration
6 */
8 #include <linux/init.h>
9 #include <linux/interrupt.h>
10 #include <linux/irq.h>
11 #include <linux/platform_device.h>
12 #include <linux/smsc911x.h>
13 #include <linux/io.h>
14 #include <asm/irq.h>
15 #include <asm/machvec.h>
16 #include <asm/heartbeat.h>
17 #include <cpu/gpio.h>
18 #include <mach-se/mach/se.h>
20 #define BCR2 (0xFFFFFF62)
21 #define WCR2 (0xFFFFFF66)
22 #define AREA5_WAIT_CTRL (0x1C00)
23 #define WAIT_STATES_10 (0x7)
25 static struct resource smsc911x_resources[] = {
26 [0] = {
27 .name = "smsc911x-memory",
28 .start = PA_EXT5,
29 .end = PA_EXT5 + 0x1fff,
30 .flags = IORESOURCE_MEM,
32 [1] = {
33 .name = "smsc911x-irq",
34 .start = IRQ0_IRQ,
35 .end = IRQ0_IRQ,
36 .flags = IORESOURCE_IRQ,
40 static struct smsc911x_platform_config smsc911x_config = {
41 .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
42 .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
43 .flags = SMSC911X_USE_32BIT,
44 .phy_interface = PHY_INTERFACE_MODE_MII,
47 static struct platform_device smsc911x_device = {
48 .name = "smsc911x",
49 .id = 0,
50 .num_resources = ARRAY_SIZE(smsc911x_resources),
51 .resource = smsc911x_resources,
52 .dev = {
53 .platform_data = &smsc911x_config,
57 static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 };
59 static struct heartbeat_data heartbeat_data = {
60 .bit_pos = heartbeat_bit_pos,
61 .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
64 static struct resource heartbeat_resource = {
65 .start = PORT_PCDR,
66 .end = PORT_PCDR,
67 .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
70 static struct platform_device heartbeat_device = {
71 .name = "heartbeat",
72 .id = -1,
73 .dev = {
74 .platform_data = &heartbeat_data,
76 .num_resources = 1,
77 .resource = &heartbeat_resource,
80 static struct platform_device *polaris_devices[] __initdata = {
81 &smsc911x_device,
82 &heartbeat_device,
85 static int __init polaris_initialise(void)
87 u16 wcr, bcr_mask;
89 printk(KERN_INFO "Configuring Polaris external bus\n");
91 /* Configure area 5 with 2 wait states */
92 wcr = __raw_readw(WCR2);
93 wcr &= (~AREA5_WAIT_CTRL);
94 wcr |= (WAIT_STATES_10 << 10);
95 __raw_writew(wcr, WCR2);
97 /* Configure area 5 for 32-bit access */
98 bcr_mask = __raw_readw(BCR2);
99 bcr_mask |= 1 << 10;
100 __raw_writew(bcr_mask, BCR2);
102 return platform_add_devices(polaris_devices,
103 ARRAY_SIZE(polaris_devices));
105 arch_initcall(polaris_initialise);
107 static struct ipr_data ipr_irq_table[] = {
108 /* External IRQs */
109 { IRQ0_IRQ, 0, 0, 1, }, /* IRQ0 */
110 { IRQ1_IRQ, 0, 4, 1, }, /* IRQ1 */
113 static unsigned long ipr_offsets[] = {
114 INTC_IPRC
117 static struct ipr_desc ipr_irq_desc = {
118 .ipr_offsets = ipr_offsets,
119 .nr_offsets = ARRAY_SIZE(ipr_offsets),
121 .ipr_data = ipr_irq_table,
122 .nr_irqs = ARRAY_SIZE(ipr_irq_table),
123 .chip = {
124 .name = "sh7709-ext",
128 static void __init init_polaris_irq(void)
130 /* Disable all interrupts */
131 __raw_writew(0, BCR_ILCRA);
132 __raw_writew(0, BCR_ILCRB);
133 __raw_writew(0, BCR_ILCRC);
134 __raw_writew(0, BCR_ILCRD);
135 __raw_writew(0, BCR_ILCRE);
136 __raw_writew(0, BCR_ILCRF);
137 __raw_writew(0, BCR_ILCRG);
139 register_ipr_controller(&ipr_irq_desc);
142 static struct sh_machine_vector mv_polaris __initmv = {
143 .mv_name = "Polaris",
144 .mv_nr_irqs = 61,
145 .mv_init_irq = init_polaris_irq,