kvm tools, setup: Create private directory

[linux-2.6/next.git] / include / linux / ti_wilink_st.h

/*
 *  Shared Transport Header file
 *      To be included by the protocol stack drivers for
 *      Texas Instruments BT,FM and GPS combo chip drivers
 *      and also serves the sub-modules of the shared transport driver.
 *
 *  Copyright (C) 2009-2010 Texas Instruments
 *  Author: Pavan Savoy <pavan_savoy@ti.com>
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License version 2 as
 *  published by the Free Software Foundation.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 *
 */

#ifndef TI_WILINK_ST_H
#define TI_WILINK_ST_H

/**
 * enum proto-type - The protocol on WiLink chips which share a
 *      common physical interface like UART.
 */
enum proto_type {
        ST_BT,
        ST_FM,
        ST_GPS,
        ST_MAX_CHANNELS = 16,
};

/**
 * struct st_proto_s - Per Protocol structure from BT/FM/GPS to ST
 * @type: type of the protocol being registered among the
 *      available proto_type(BT, FM, GPS the protocol which share TTY).
 * @recv: the receiver callback pointing to a function in the
 *      protocol drivers called by the ST driver upon receiving
 *      relevant data.
 * @match_packet: reserved for future use, to make ST more generic
 * @reg_complete_cb: callback handler pointing to a function in protocol
 *      handler called by ST when the pending registrations are complete.
 *      The registrations are marked pending, in situations when fw
 *      download is in progress.
 * @write: pointer to function in ST provided to protocol drivers from ST,
 *      to be made use when protocol drivers have data to send to TTY.
 * @priv_data: privdate data holder for the protocol drivers, sent
 *      from the protocol drivers during registration, and sent back on
 *      reg_complete_cb and recv.
 * @chnl_id: channel id the protocol driver is interested in, the channel
 *      id is nothing but the 1st byte of the packet in UART frame.
 * @max_frame_size: size of the largest frame the protocol can receive.
 * @hdr_len: length of the header structure of the protocol.
 * @offset_len_in_hdr: this provides the offset of the length field in the
 *      header structure of the protocol header, to assist ST to know
 *      how much to receive, if the data is split across UART frames.
 * @len_size: whether the length field inside the header is 2 bytes
 *      or 1 byte.
 * @reserve: the number of bytes ST needs to reserve in the skb being
 *      prepared for the protocol driver.
 */
struct st_proto_s {
        enum proto_type type;
        long (*recv) (void *, struct sk_buff *);
        unsigned char (*match_packet) (const unsigned char *data);
        void (*reg_complete_cb) (void *, char data);
        long (*write) (struct sk_buff *skb);
        void *priv_data;

        unsigned char chnl_id;
        unsigned short max_frame_size;
        unsigned char hdr_len;
        unsigned char offset_len_in_hdr;
        unsigned char len_size;
        unsigned char reserve;
};

extern long st_register(struct st_proto_s *);
extern long st_unregister(struct st_proto_s *);


/*
 * header information used by st_core.c
 */

/* states of protocol list */
#define ST_NOTEMPTY     1
#define ST_EMPTY        0

/*
 * possible st_states
 */
#define ST_INITIALIZING         1
#define ST_REG_IN_PROGRESS      2
#define ST_REG_PENDING          3
#define ST_WAITING_FOR_RESP     4

/**
 * struct st_data_s - ST core internal structure
 * @st_state: different states of ST like initializing, registration
 *      in progress, this is mainly used to return relevant err codes
 *      when protocol drivers are registering. It is also used to track
 *      the recv function, as in during fw download only HCI events
 *      can occur , where as during other times other events CH8, CH9
 *      can occur.
 * @tty: tty provided by the TTY core for line disciplines.
 * @tx_skb: If for some reason the tty's write returns lesser bytes written
 *      then to maintain the rest of data to be written on next instance.
 *      This needs to be protected, hence the lock inside wakeup func.
 * @tx_state: if the data is being written onto the TTY and protocol driver
 *      wants to send more, queue up data and mark that there is
 *      more data to send.
 * @list: the list of protocols registered, only MAX can exist, one protocol
 *      can register only once.
 * @rx_state: states to be maintained inside st's tty receive
 * @rx_count: count to be maintained inside st's tty receieve
 * @rx_skb: the skb where all data for a protocol gets accumulated,
 *      since tty might not call receive when a complete event packet
 *      is received, the states, count and the skb needs to be maintained.
 * @rx_chnl: the channel ID for which the data is getting accumalated for.
 * @txq: the list of skbs which needs to be sent onto the TTY.
 * @tx_waitq: if the chip is not in AWAKE state, the skbs needs to be queued
 *      up in here, PM(WAKEUP_IND) data needs to be sent and then the skbs
 *      from waitq can be moved onto the txq.
 *      Needs locking too.
 * @lock: the lock to protect skbs, queues, and ST states.
 * @protos_registered: count of the protocols registered, also when 0 the
 *      chip enable gpio can be toggled, and when it changes to 1 the fw
 *      needs to be downloaded to initialize chip side ST.
 * @ll_state: the various PM states the chip can be, the states are notified
 *      to us, when the chip sends relevant PM packets(SLEEP_IND, WAKE_IND).
 * @kim_data: reference to the parent encapsulating structure.
 *
 */
struct st_data_s {
        unsigned long st_state;
        struct sk_buff *tx_skb;
#define ST_TX_SENDING   1
#define ST_TX_WAKEUP    2
        unsigned long tx_state;
        struct st_proto_s *list[ST_MAX_CHANNELS];
        bool is_registered[ST_MAX_CHANNELS];
        unsigned long rx_state;
        unsigned long rx_count;
        struct sk_buff *rx_skb;
        unsigned char rx_chnl;
        struct sk_buff_head txq, tx_waitq;
        spinlock_t lock;
        unsigned char   protos_registered;
        unsigned long ll_state;
        void *kim_data;
        struct tty_struct *tty;
};

/*
 * wrapper around tty->ops->write_room to check
 * availability during firmware download
 */
int st_get_uart_wr_room(struct st_data_s *st_gdata);
/**
 * st_int_write -
 * point this to tty->driver->write or tty->ops->write
 * depending upon the kernel version
 */
int st_int_write(struct st_data_s*, const unsigned char*, int);

/**
 * st_write -
 * internal write function, passed onto protocol drivers
 * via the write function ptr of protocol struct
 */
long st_write(struct sk_buff *);

/* function to be called from ST-LL */
void st_ll_send_frame(enum proto_type, struct sk_buff *);

/* internal wake up function */
void st_tx_wakeup(struct st_data_s *st_data);

/* init, exit entry funcs called from KIM */
int st_core_init(struct st_data_s **);
void st_core_exit(struct st_data_s *);

/* ask for reference from KIM */
void st_kim_ref(struct st_data_s **, int);

#define GPS_STUB_TEST
#ifdef GPS_STUB_TEST
int gps_chrdrv_stub_write(const unsigned char*, int);
void gps_chrdrv_stub_init(void);
#endif

/*
 * header information used by st_kim.c
 */

/* time in msec to wait for
 * line discipline to be installed
 */
#define LDISC_TIME      1000
#define CMD_RESP_TIME   800
#define CMD_WR_TIME     5000
#define MAKEWORD(a, b)  ((unsigned short)(((unsigned char)(a)) \
        | ((unsigned short)((unsigned char)(b))) << 8))

#define GPIO_HIGH 1
#define GPIO_LOW  0

/* the Power-On-Reset logic, requires to attempt
 * to download firmware onto chip more than once
 * since the self-test for chip takes a while
 */
#define POR_RETRY_COUNT 5

/**
 * struct chip_version - save the chip version
 */
struct chip_version {
        unsigned short full;
        unsigned short chip;
        unsigned short min_ver;
        unsigned short maj_ver;
};

#define UART_DEV_NAME_LEN 32
/**
 * struct kim_data_s - the KIM internal data, embedded as the
 *      platform's drv data. One for each ST device in the system.
 * @uim_pid: KIM needs to communicate with UIM to request to install
 *      the ldisc by opening UART when protocol drivers register.
 * @kim_pdev: the platform device added in one of the board-XX.c file
 *      in arch/XX/ directory, 1 for each ST device.
 * @kim_rcvd: completion handler to notify when data was received,
 *      mainly used during fw download, which involves multiple send/wait
 *      for each of the HCI-VS commands.
 * @ldisc_installed: completion handler to notify that the UIM accepted
 *      the request to install ldisc, notify from tty_open which suggests
 *      the ldisc was properly installed.
 * @resp_buffer: data buffer for the .bts fw file name.
 * @fw_entry: firmware class struct to request/release the fw.
 * @rx_state: the rx state for kim's receive func during fw download.
 * @rx_count: the rx count for the kim's receive func during fw download.
 * @rx_skb: all of fw data might not come at once, and hence data storage for
 *      whole of the fw response, only HCI_EVENTs and hence diff from ST's
 *      response.
 * @core_data: ST core's data, which mainly is the tty's disc_data
 * @version: chip version available via a sysfs entry.
 *
 */
struct kim_data_s {
        long uim_pid;
        struct platform_device *kim_pdev;
        struct completion kim_rcvd, ldisc_installed;
        char resp_buffer[30];
        const struct firmware *fw_entry;
        long nshutdown;
        unsigned long rx_state;
        unsigned long rx_count;
        struct sk_buff *rx_skb;
        struct st_data_s *core_data;
        struct chip_version version;
        unsigned char ldisc_install;
        unsigned char dev_name[UART_DEV_NAME_LEN];
        unsigned char flow_cntrl;
        unsigned long baud_rate;
};

/**
 * functions called when 1 of the protocol drivers gets
 * registered, these need to communicate with UIM to request
 * ldisc installed, read chip_version, download relevant fw
 */
long st_kim_start(void *);
long st_kim_stop(void *);

void st_kim_recv(void *, const unsigned char *, long count);
void st_kim_complete(void *);
void kim_st_list_protocols(struct st_data_s *, void *);

/*
 * BTS headers
 */
#define ACTION_SEND_COMMAND     1
#define ACTION_WAIT_EVENT       2
#define ACTION_SERIAL           3
#define ACTION_DELAY            4
#define ACTION_RUN_SCRIPT       5
#define ACTION_REMARKS          6

/**
 * struct bts_header - the fw file is NOT binary which can
 *      be sent onto TTY as is. The .bts is more a script
 *      file which has different types of actions.
 *      Each such action needs to be parsed by the KIM and
 *      relevant procedure to be called.
 */
struct bts_header {
        u32 magic;
        u32 version;
        u8 future[24];
        u8 actions[0];
} __attribute__ ((packed));

/**
 * struct bts_action - Each .bts action has its own type of
 *      data.
 */
struct bts_action {
        u16 type;
        u16 size;
        u8 data[0];
} __attribute__ ((packed));

struct bts_action_send {
        u8 data[0];
} __attribute__ ((packed));

struct bts_action_wait {
        u32 msec;
        u32 size;
        u8 data[0];
} __attribute__ ((packed));

struct bts_action_delay {
        u32 msec;
} __attribute__ ((packed));

struct bts_action_serial {
        u32 baud;
        u32 flow_control;
} __attribute__ ((packed));

/**
 * struct hci_command - the HCI-VS for intrepreting
 *      the change baud rate of host-side UART, which
 *      needs to be ignored, since UIM would do that
 *      when it receives request from KIM for ldisc installation.
 */
struct hci_command {
        u8 prefix;
        u16 opcode;
        u8 plen;
        u32 speed;
} __attribute__ ((packed));

/*
 * header information used by st_ll.c
 */

/* ST LL receiver states */
#define ST_W4_PACKET_TYPE       0
#define ST_W4_HEADER            1
#define ST_W4_DATA              2

/* ST LL state machines */
#define ST_LL_ASLEEP               0
#define ST_LL_ASLEEP_TO_AWAKE      1
#define ST_LL_AWAKE                2
#define ST_LL_AWAKE_TO_ASLEEP      3
#define ST_LL_INVALID              4

/* different PM notifications coming from chip */
#define LL_SLEEP_IND    0x30
#define LL_SLEEP_ACK    0x31
#define LL_WAKE_UP_IND  0x32
#define LL_WAKE_UP_ACK  0x33

/* initialize and de-init ST LL */
long st_ll_init(struct st_data_s *);
long st_ll_deinit(struct st_data_s *);

/**
 * enable/disable ST LL along with KIM start/stop
 * called by ST Core
 */
void st_ll_enable(struct st_data_s *);
void st_ll_disable(struct st_data_s *);

/**
 * various funcs used by ST core to set/get the various PM states
 * of the chip.
 */
unsigned long st_ll_getstate(struct st_data_s *);
unsigned long st_ll_sleep_state(struct st_data_s *, unsigned char);
void st_ll_wakeup(struct st_data_s *);

/*
 * header information used by st_core.c for FM and GPS
 * packet parsing, the bluetooth headers are already available
 * at net/bluetooth/
 */

struct fm_event_hdr {
        u8 plen;
} __attribute__ ((packed));

#define FM_MAX_FRAME_SIZE 0xFF  /* TODO: */
#define FM_EVENT_HDR_SIZE 1     /* size of fm_event_hdr */
#define ST_FM_CH8_PKT 0x8

/* gps stuff */
struct gps_event_hdr {
        u8 opcode;
        u16 plen;
} __attribute__ ((packed));

/* platform data */
struct ti_st_plat_data {
        long nshutdown_gpio;
        unsigned char dev_name[UART_DEV_NAME_LEN]; /* uart name */
        unsigned char flow_cntrl; /* flow control flag */
        unsigned long baud_rate;
        int (*suspend)(struct platform_device *, pm_message_t);
        int (*resume)(struct platform_device *);
};

#endif /* TI_WILINK_ST_H */