2 * Speyside audio support
4 * Copyright 2011 Wolfson Microelectronics
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
12 #include <sound/soc.h>
13 #include <sound/soc-dapm.h>
14 #include <sound/jack.h>
15 #include <linux/gpio.h>
17 #include "../codecs/wm8915.h"
18 #include "../codecs/wm9081.h"
20 #define WM8915_HPSEL_GPIO 214
22 static int speyside_set_bias_level(struct snd_soc_card
*card
,
23 enum snd_soc_bias_level level
)
25 struct snd_soc_dai
*codec_dai
= card
->rtd
[0].codec_dai
;
29 case SND_SOC_BIAS_STANDBY
:
30 ret
= snd_soc_dai_set_sysclk(codec_dai
, WM8915_SYSCLK_MCLK1
,
31 32768, SND_SOC_CLOCK_IN
);
35 ret
= snd_soc_dai_set_pll(codec_dai
, WM8915_FLL_MCLK1
,
38 pr_err("Failed to stop FLL\n");
49 static int speyside_hw_params(struct snd_pcm_substream
*substream
,
50 struct snd_pcm_hw_params
*params
)
52 struct snd_soc_pcm_runtime
*rtd
= substream
->private_data
;
53 struct snd_soc_dai
*cpu_dai
= rtd
->cpu_dai
;
54 struct snd_soc_dai
*codec_dai
= rtd
->codec_dai
;
57 ret
= snd_soc_dai_set_fmt(codec_dai
, SND_SOC_DAIFMT_I2S
58 | SND_SOC_DAIFMT_NB_NF
59 | SND_SOC_DAIFMT_CBM_CFM
);
63 ret
= snd_soc_dai_set_fmt(cpu_dai
, SND_SOC_DAIFMT_I2S
64 | SND_SOC_DAIFMT_NB_NF
65 | SND_SOC_DAIFMT_CBM_CFM
);
69 ret
= snd_soc_dai_set_pll(codec_dai
, 0, WM8915_FLL_MCLK1
,
74 ret
= snd_soc_dai_set_sysclk(codec_dai
, WM8915_SYSCLK_FLL
,
75 256 * 48000, SND_SOC_CLOCK_IN
);
82 static struct snd_soc_ops speyside_ops
= {
83 .hw_params
= speyside_hw_params
,
86 static struct snd_soc_jack speyside_headset
;
88 /* Headset jack detection DAPM pins */
89 static struct snd_soc_jack_pin speyside_headset_pins
[] = {
92 .mask
= SND_JACK_MICROPHONE
,
96 .mask
= SND_JACK_HEADPHONE
,
100 /* Default the headphone selection to active high */
101 static int speyside_jack_polarity
;
103 static int speyside_get_micbias(struct snd_soc_dapm_widget
*source
,
104 struct snd_soc_dapm_widget
*sink
)
106 if (speyside_jack_polarity
&& (strcmp(source
->name
, "MICB1") == 0))
108 if (!speyside_jack_polarity
&& (strcmp(source
->name
, "MICB2") == 0))
114 static void speyside_set_polarity(struct snd_soc_codec
*codec
,
117 speyside_jack_polarity
= !polarity
;
118 gpio_direction_output(WM8915_HPSEL_GPIO
, speyside_jack_polarity
);
120 /* Re-run DAPM to make sure we're using the correct mic bias */
121 snd_soc_dapm_sync(&codec
->dapm
);
124 static int speyside_wm8915_init(struct snd_soc_pcm_runtime
*rtd
)
126 struct snd_soc_dai
*dai
= rtd
->codec_dai
;
127 struct snd_soc_codec
*codec
= rtd
->codec
;
130 ret
= snd_soc_dai_set_sysclk(dai
, WM8915_SYSCLK_MCLK1
, 32768, 0);
134 ret
= gpio_request(WM8915_HPSEL_GPIO
, "HP_SEL");
136 pr_err("Failed to request HP_SEL GPIO: %d\n", ret
);
137 gpio_direction_output(WM8915_HPSEL_GPIO
, speyside_jack_polarity
);
139 ret
= snd_soc_jack_new(codec
, "Headset",
140 SND_JACK_HEADSET
| SND_JACK_BTN_0
,
145 ret
= snd_soc_jack_add_pins(&speyside_headset
,
146 ARRAY_SIZE(speyside_headset_pins
),
147 speyside_headset_pins
);
151 wm8915_detect(codec
, &speyside_headset
, speyside_set_polarity
);
156 static int speyside_late_probe(struct snd_soc_card
*card
)
158 snd_soc_dapm_ignore_suspend(&card
->dapm
, "Headphone");
159 snd_soc_dapm_ignore_suspend(&card
->dapm
, "Headset Mic");
160 snd_soc_dapm_ignore_suspend(&card
->dapm
, "Main AMIC");
161 snd_soc_dapm_ignore_suspend(&card
->dapm
, "Main DMIC");
162 snd_soc_dapm_ignore_suspend(&card
->dapm
, "Speaker");
163 snd_soc_dapm_ignore_suspend(&card
->dapm
, "WM1250 Output");
164 snd_soc_dapm_ignore_suspend(&card
->dapm
, "WM1250 Input");
169 static struct snd_soc_dai_link speyside_dai
[] = {
172 .stream_name
= "CPU",
173 .cpu_dai_name
= "samsung-i2s.0",
174 .codec_dai_name
= "wm8915-aif1",
175 .platform_name
= "samsung-audio",
176 .codec_name
= "wm8915.1-001a",
177 .init
= speyside_wm8915_init
,
178 .ops
= &speyside_ops
,
182 .stream_name
= "Baseband",
183 .cpu_dai_name
= "wm8915-aif2",
184 .codec_dai_name
= "wm1250-ev1",
185 .codec_name
= "wm1250-ev1.1-0027",
186 .ops
= &speyside_ops
,
191 static int speyside_wm9081_init(struct snd_soc_dapm_context
*dapm
)
193 snd_soc_dapm_nc_pin(dapm
, "LINEOUT");
195 /* At any time the WM9081 is active it will have this clock */
196 return snd_soc_codec_set_sysclk(dapm
->codec
, WM9081_SYSCLK_MCLK
,
200 static struct snd_soc_aux_dev speyside_aux_dev
[] = {
203 .codec_name
= "wm9081.1-006c",
204 .init
= speyside_wm9081_init
,
208 static struct snd_soc_codec_conf speyside_codec_conf
[] = {
210 .dev_name
= "wm9081.1-006c",
211 .name_prefix
= "Sub",
215 static const struct snd_kcontrol_new controls
[] = {
216 SOC_DAPM_PIN_SWITCH("Main Speaker"),
217 SOC_DAPM_PIN_SWITCH("Main DMIC"),
218 SOC_DAPM_PIN_SWITCH("Main AMIC"),
219 SOC_DAPM_PIN_SWITCH("WM1250 Input"),
220 SOC_DAPM_PIN_SWITCH("WM1250 Output"),
223 static struct snd_soc_dapm_widget widgets
[] = {
224 SND_SOC_DAPM_HP("Headphone", NULL
),
225 SND_SOC_DAPM_MIC("Headset Mic", NULL
),
227 SND_SOC_DAPM_SPK("Main Speaker", NULL
),
229 SND_SOC_DAPM_MIC("Main AMIC", NULL
),
230 SND_SOC_DAPM_MIC("Main DMIC", NULL
),
233 static struct snd_soc_dapm_route audio_paths
[] = {
234 { "IN1RN", NULL
, "MICB1" },
235 { "IN1RP", NULL
, "MICB1" },
236 { "IN1RN", NULL
, "MICB2" },
237 { "IN1RP", NULL
, "MICB2" },
238 { "MICB1", NULL
, "Headset Mic", speyside_get_micbias
},
239 { "MICB2", NULL
, "Headset Mic", speyside_get_micbias
},
241 { "IN1LP", NULL
, "MICB2" },
242 { "IN1RN", NULL
, "MICB1" },
243 { "MICB2", NULL
, "Main AMIC" },
245 { "DMIC1DAT", NULL
, "MICB1" },
246 { "DMIC2DAT", NULL
, "MICB1" },
247 { "MICB1", NULL
, "Main DMIC" },
249 { "Headphone", NULL
, "HPOUT1L" },
250 { "Headphone", NULL
, "HPOUT1R" },
252 { "Sub IN1", NULL
, "HPOUT2L" },
253 { "Sub IN2", NULL
, "HPOUT2R" },
255 { "Main Speaker", NULL
, "Sub SPKN" },
256 { "Main Speaker", NULL
, "Sub SPKP" },
257 { "Main Speaker", NULL
, "SPKDAT" },
260 static struct snd_soc_card speyside
= {
262 .dai_link
= speyside_dai
,
263 .num_links
= ARRAY_SIZE(speyside_dai
),
264 .aux_dev
= speyside_aux_dev
,
265 .num_aux_devs
= ARRAY_SIZE(speyside_aux_dev
),
266 .codec_conf
= speyside_codec_conf
,
267 .num_configs
= ARRAY_SIZE(speyside_codec_conf
),
269 .set_bias_level
= speyside_set_bias_level
,
271 .controls
= controls
,
272 .num_controls
= ARRAY_SIZE(controls
),
273 .dapm_widgets
= widgets
,
274 .num_dapm_widgets
= ARRAY_SIZE(widgets
),
275 .dapm_routes
= audio_paths
,
276 .num_dapm_routes
= ARRAY_SIZE(audio_paths
),
278 .late_probe
= speyside_late_probe
,
281 static __devinit
int speyside_probe(struct platform_device
*pdev
)
283 struct snd_soc_card
*card
= &speyside
;
286 card
->dev
= &pdev
->dev
;
288 ret
= snd_soc_register_card(card
);
290 dev_err(&pdev
->dev
, "snd_soc_register_card() failed: %d\n",
298 static int __devexit
speyside_remove(struct platform_device
*pdev
)
300 struct snd_soc_card
*card
= platform_get_drvdata(pdev
);
302 snd_soc_unregister_card(card
);
307 static struct platform_driver speyside_driver
= {
310 .owner
= THIS_MODULE
,
311 .pm
= &snd_soc_pm_ops
,
313 .probe
= speyside_probe
,
314 .remove
= __devexit_p(speyside_remove
),
317 static int __init
speyside_audio_init(void)
319 return platform_driver_register(&speyside_driver
);
321 module_init(speyside_audio_init
);
323 static void __exit
speyside_audio_exit(void)
325 platform_driver_unregister(&speyside_driver
);
327 module_exit(speyside_audio_exit
);
329 MODULE_DESCRIPTION("Speyside audio support");
330 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
331 MODULE_LICENSE("GPL");
332 MODULE_ALIAS("platform:speyside");