arch/arm/common/vic.c

   1 /*
   2  *  linux/arch/arm/common/vic.c
   3  *
   4  *  Copyright (C) 1999 - 2003 ARM Limited
   5  *  Copyright (C) 2000 Deep Blue Solutions Ltd
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  20  */
  21
  22 #include <linux/init.h>
  23 #include <linux/list.h>
  24 #include <linux/io.h>
  25 #include <linux/syscore_ops.h>
  26 #include <linux/device.h>
  27 #include <linux/amba/bus.h>
  28
  29 #include <asm/mach/irq.h>
  30 #include <asm/hardware/vic.h>
  31
  32 #ifdef CONFIG_PM
  33 /**
  34  * struct vic_device - VIC PM device
  35  * @irq: The IRQ number for the base of the VIC.
  36  * @base: The register base for the VIC.
  37  * @resume_sources: A bitmask of interrupts for resume.
  38  * @resume_irqs: The IRQs enabled for resume.
  39  * @int_select: Save for VIC_INT_SELECT.
  40  * @int_enable: Save for VIC_INT_ENABLE.
  41  * @soft_int: Save for VIC_INT_SOFT.
  42  * @protect: Save for VIC_PROTECT.
  43  */
  44 struct vic_device {
  45         void __iomem    *base;
  46         int             irq;
  47         u32             resume_sources;
  48         u32             resume_irqs;
  49         u32             int_select;
  50         u32             int_enable;
  51         u32             soft_int;
  52         u32             protect;
  53 };
  54
  55 /* we cannot allocate memory when VICs are initially registered */
  56 static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
  57
  58 static int vic_id;
  59 #endif /* CONFIG_PM */
  60
  61 /**
  62  * vic_init2 - common initialisation code
  63  * @base: Base of the VIC.
  64  *
  65  * Common initialisation code for registration
  66  * and resume.
  67 */
  68 static void vic_init2(void __iomem *base)
  69 {
  70         int i;
  71
  72         for (i = 0; i < 16; i++) {
  73                 void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
  74                 writel(VIC_VECT_CNTL_ENABLE | i, reg);
  75         }
  76
  77         writel(32, base + VIC_PL190_DEF_VECT_ADDR);
  78 }
  79
  80 #ifdef CONFIG_PM
  81 static void resume_one_vic(struct vic_device *vic)
  82 {
  83         void __iomem *base = vic->base;
  84
  85         printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base);
  86
  87         /* re-initialise static settings */
  88         vic_init2(base);
  89
  90         writel(vic->int_select, base + VIC_INT_SELECT);
  91         writel(vic->protect, base + VIC_PROTECT);
  92
  93         /* set the enabled ints and then clear the non-enabled */
  94         writel(vic->int_enable, base + VIC_INT_ENABLE);
  95         writel(~vic->int_enable, base + VIC_INT_ENABLE_CLEAR);
  96
  97         /* and the same for the soft-int register */
  98
  99         writel(vic->soft_int, base + VIC_INT_SOFT);
 100         writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR);
 101 }
 102
 103 static void vic_resume(void)
 104 {
 105         int id;
 106
 107         for (id = vic_id - 1; id >= 0; id--)
 108                 resume_one_vic(vic_devices + id);
 109 }
 110
 111 static void suspend_one_vic(struct vic_device *vic)
 112 {
 113         void __iomem *base = vic->base;
 114
 115         printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base);
 116
 117         vic->int_select = readl(base + VIC_INT_SELECT);
 118         vic->int_enable = readl(base + VIC_INT_ENABLE);
 119         vic->soft_int = readl(base + VIC_INT_SOFT);
 120         vic->protect = readl(base + VIC_PROTECT);
 121
 122         /* set the interrupts (if any) that are used for
 123          * resuming the system */
 124
 125         writel(vic->resume_irqs, base + VIC_INT_ENABLE);
 126         writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR);
 127 }
 128
 129 static int vic_suspend(void)
 130 {
 131         int id;
 132
 133         for (id = 0; id < vic_id; id++)
 134                 suspend_one_vic(vic_devices + id);
 135
 136         return 0;
 137 }
 138
 139 struct syscore_ops vic_syscore_ops = {
 140         .suspend        = vic_suspend,
 141         .resume         = vic_resume,
 142 };
 143
 144 /**
 145  * vic_pm_init - initicall to register VIC pm
 146  *
 147  * This is called via late_initcall() to register
 148  * the resources for the VICs due to the early
 149  * nature of the VIC's registration.
 150 */
 151 static int __init vic_pm_init(void)
 152 {
 153         if (vic_id > 0)
 154                 register_syscore_ops(&vic_syscore_ops);
 155
 156         return 0;
 157 }
 158 late_initcall(vic_pm_init);
 159
 160 /**
 161  * vic_pm_register - Register a VIC for later power management control
 162  * @base: The base address of the VIC.
 163  * @irq: The base IRQ for the VIC.
 164  * @resume_sources: bitmask of interrupts allowed for resume sources.
 165  *
 166  * Register the VIC with the system device tree so that it can be notified
 167  * of suspend and resume requests and ensure that the correct actions are
 168  * taken to re-instate the settings on resume.
 169  */
 170 static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
 171 {
 172         struct vic_device *v;
 173
 174         if (vic_id >= ARRAY_SIZE(vic_devices))
 175                 printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
 176         else {
 177                 v = &vic_devices[vic_id];
 178                 v->base = base;
 179                 v->resume_sources = resume_sources;
 180                 v->irq = irq;
 181                 vic_id++;
 182         }
 183 }
 184 #else
 185 static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
 186 #endif /* CONFIG_PM */
 187
 188 static void vic_ack_irq(struct irq_data *d)
 189 {
 190         void __iomem *base = irq_data_get_irq_chip_data(d);
 191         unsigned int irq = d->irq & 31;
 192         writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
 193         /* moreover, clear the soft-triggered, in case it was the reason */
 194         writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
 195 }
 196
 197 static void vic_mask_irq(struct irq_data *d)
 198 {
 199         void __iomem *base = irq_data_get_irq_chip_data(d);
 200         unsigned int irq = d->irq & 31;
 201         writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
 202 }
 203
 204 static void vic_unmask_irq(struct irq_data *d)
 205 {
 206         void __iomem *base = irq_data_get_irq_chip_data(d);
 207         unsigned int irq = d->irq & 31;
 208         writel(1 << irq, base + VIC_INT_ENABLE);
 209 }
 210
 211 #if defined(CONFIG_PM)
 212 static struct vic_device *vic_from_irq(unsigned int irq)
 213 {
 214         struct vic_device *v = vic_devices;
 215         unsigned int base_irq = irq & ~31;
 216         int id;
 217
 218         for (id = 0; id < vic_id; id++, v++) {
 219                 if (v->irq == base_irq)
 220                         return v;
 221         }
 222
 223         return NULL;
 224 }
 225
 226 static int vic_set_wake(struct irq_data *d, unsigned int on)
 227 {
 228         struct vic_device *v = vic_from_irq(d->irq);
 229         unsigned int off = d->irq & 31;
 230         u32 bit = 1 << off;
 231
 232         if (!v)
 233                 return -EINVAL;
 234
 235         if (!(bit & v->resume_sources))
 236                 return -EINVAL;
 237
 238         if (on)
 239                 v->resume_irqs |= bit;
 240         else
 241                 v->resume_irqs &= ~bit;
 242
 243         return 0;
 244 }
 245 #else
 246 #define vic_set_wake NULL
 247 #endif /* CONFIG_PM */
 248
 249 static struct irq_chip vic_chip = {
 250         .name           = "VIC",
 251         .irq_ack        = vic_ack_irq,
 252         .irq_mask       = vic_mask_irq,
 253         .irq_unmask     = vic_unmask_irq,
 254         .irq_set_wake   = vic_set_wake,
 255 };
 256
 257 static void __init vic_disable(void __iomem *base)
 258 {
 259         writel(0, base + VIC_INT_SELECT);
 260         writel(0, base + VIC_INT_ENABLE);
 261         writel(~0, base + VIC_INT_ENABLE_CLEAR);
 262         writel(0, base + VIC_IRQ_STATUS);
 263         writel(0, base + VIC_ITCR);
 264         writel(~0, base + VIC_INT_SOFT_CLEAR);
 265 }
 266
 267 static void __init vic_clear_interrupts(void __iomem *base)
 268 {
 269         unsigned int i;
 270
 271         writel(0, base + VIC_PL190_VECT_ADDR);
 272         for (i = 0; i < 19; i++) {
 273                 unsigned int value;
 274
 275                 value = readl(base + VIC_PL190_VECT_ADDR);
 276                 writel(value, base + VIC_PL190_VECT_ADDR);
 277         }
 278 }
 279
 280 static void __init vic_set_irq_sources(void __iomem *base,
 281                                 unsigned int irq_start, u32 vic_sources)
 282 {
 283         unsigned int i;
 284
 285         for (i = 0; i < 32; i++) {
 286                 if (vic_sources & (1 << i)) {
 287                         unsigned int irq = irq_start + i;
 288
 289                         irq_set_chip_and_handler(irq, &vic_chip,
 290                                                  handle_level_irq);
 291                         irq_set_chip_data(irq, base);
 292                         set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 293                 }
 294         }
 295 }
 296
 297 /*
 298  * The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
 299  * The original cell has 32 interrupts, while the modified one has 64,
 300  * replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case
 301  * the probe function is called twice, with base set to offset 000
 302  *  and 020 within the page. We call this "second block".
 303  */
 304 static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
 305                                 u32 vic_sources)
 306 {
 307         unsigned int i;
 308         int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
 309
 310         /* Disable all interrupts initially. */
 311         vic_disable(base);
 312
 313         /*
 314          * Make sure we clear all existing interrupts. The vector registers
 315          * in this cell are after the second block of general registers,
 316          * so we can address them using standard offsets, but only from
 317          * the second base address, which is 0x20 in the page
 318          */
 319         if (vic_2nd_block) {
 320                 vic_clear_interrupts(base);
 321
 322                 /* ST has 16 vectors as well, but we don't enable them by now */
 323                 for (i = 0; i < 16; i++) {
 324                         void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
 325                         writel(0, reg);
 326                 }
 327
 328                 writel(32, base + VIC_PL190_DEF_VECT_ADDR);
 329         }
 330
 331         vic_set_irq_sources(base, irq_start, vic_sources);
 332 }
 333
 334 /**
 335  * vic_init - initialise a vectored interrupt controller
 336  * @base: iomem base address
 337  * @irq_start: starting interrupt number, must be muliple of 32
 338  * @vic_sources: bitmask of interrupt sources to allow
 339  * @resume_sources: bitmask of interrupt sources to allow for resume
 340  */
 341 void __init vic_init(void __iomem *base, unsigned int irq_start,
 342                      u32 vic_sources, u32 resume_sources)
 343 {
 344         unsigned int i;
 345         u32 cellid = 0;
 346         enum amba_vendor vendor;
 347
 348         /* Identify which VIC cell this one is, by reading the ID */
 349         for (i = 0; i < 4; i++) {
 350                 u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
 351                 cellid |= (readl(addr) & 0xff) << (8 * i);
 352         }
 353         vendor = (cellid >> 12) & 0xff;
 354         printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
 355                base, cellid, vendor);
 356
 357         switch(vendor) {
 358         case AMBA_VENDOR_ST:
 359                 vic_init_st(base, irq_start, vic_sources);
 360                 return;
 361         default:
 362                 printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
 363                 /* fall through */
 364         case AMBA_VENDOR_ARM:
 365                 break;
 366         }
 367
 368         /* Disable all interrupts initially. */
 369         vic_disable(base);
 370
 371         /* Make sure we clear all existing interrupts */
 372         vic_clear_interrupts(base);
 373
 374         vic_init2(base);
 375
 376         vic_set_irq_sources(base, irq_start, vic_sources);
 377
 378         vic_pm_register(base, irq_start, resume_sources);
 379 }