This client driver allows you to use a GPIO pin as a source for PPS
[linux-2.6/next.git] / drivers / regulator / mc13xxx.h
blob27758267e12298858c6af4a4d66bb0a76be9df33
1 /*
2 * mc13xxx.h - regulators for the Freescale mc13xxx PMIC
4 * Copyright (C) 2010 Yong Shen <yong.shen@linaro.org>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
12 #ifndef __LINUX_REGULATOR_MC13XXX_H
13 #define __LINUX_REGULATOR_MC13XXX_H
15 #include <linux/regulator/driver.h>
17 struct mc13xxx_regulator {
18 struct regulator_desc desc;
19 int reg;
20 int enable_bit;
21 int vsel_reg;
22 int vsel_shift;
23 int vsel_mask;
24 int hi_bit;
25 int const *voltages;
28 struct mc13xxx_regulator_priv {
29 struct mc13xxx *mc13xxx;
30 u32 powermisc_pwgt_state;
31 struct mc13xxx_regulator *mc13xxx_regulators;
32 struct regulator_dev *regulators[];
35 extern int mc13xxx_sw_regulator(struct regulator_dev *rdev);
36 extern int mc13xxx_sw_regulator_is_enabled(struct regulator_dev *rdev);
37 extern int mc13xxx_get_best_voltage_index(struct regulator_dev *rdev,
38 int min_uV, int max_uV);
39 extern int mc13xxx_regulator_list_voltage(struct regulator_dev *rdev,
40 unsigned selector);
41 extern int mc13xxx_fixed_regulator_set_voltage(struct regulator_dev *rdev,
42 int min_uV, int max_uV, unsigned *selector);
43 extern int mc13xxx_fixed_regulator_get_voltage(struct regulator_dev *rdev);
45 extern struct regulator_ops mc13xxx_regulator_ops;
46 extern struct regulator_ops mc13xxx_fixed_regulator_ops;
48 #define MC13xxx_DEFINE(prefix, _name, _reg, _vsel_reg, _voltages, _ops) \
49 [prefix ## _name] = { \
50 .desc = { \
51 .name = #prefix "_" #_name, \
52 .n_voltages = ARRAY_SIZE(_voltages), \
53 .ops = &_ops, \
54 .type = REGULATOR_VOLTAGE, \
55 .id = prefix ## _name, \
56 .owner = THIS_MODULE, \
57 }, \
58 .reg = prefix ## _reg, \
59 .enable_bit = prefix ## _reg ## _ ## _name ## EN, \
60 .vsel_reg = prefix ## _vsel_reg, \
61 .vsel_shift = prefix ## _vsel_reg ## _ ## _name ## VSEL,\
62 .vsel_mask = prefix ## _vsel_reg ## _ ## _name ## VSEL_M,\
63 .voltages = _voltages, \
66 #define MC13xxx_FIXED_DEFINE(prefix, _name, _reg, _voltages, _ops) \
67 [prefix ## _name] = { \
68 .desc = { \
69 .name = #prefix "_" #_name, \
70 .n_voltages = ARRAY_SIZE(_voltages), \
71 .ops = &_ops, \
72 .type = REGULATOR_VOLTAGE, \
73 .id = prefix ## _name, \
74 .owner = THIS_MODULE, \
75 }, \
76 .reg = prefix ## _reg, \
77 .enable_bit = prefix ## _reg ## _ ## _name ## EN, \
78 .voltages = _voltages, \
81 #define MC13xxx_GPO_DEFINE(prefix, _name, _reg, _voltages, _ops) \
82 [prefix ## _name] = { \
83 .desc = { \
84 .name = #prefix "_" #_name, \
85 .n_voltages = ARRAY_SIZE(_voltages), \
86 .ops = &_ops, \
87 .type = REGULATOR_VOLTAGE, \
88 .id = prefix ## _name, \
89 .owner = THIS_MODULE, \
90 }, \
91 .reg = prefix ## _reg, \
92 .enable_bit = prefix ## _reg ## _ ## _name ## EN, \
93 .voltages = _voltages, \
96 #define MC13xxx_DEFINE_SW(_name, _reg, _vsel_reg, _voltages, ops) \
97 MC13xxx_DEFINE(SW, _name, _reg, _vsel_reg, _voltages, ops)
98 #define MC13xxx_DEFINE_REGU(_name, _reg, _vsel_reg, _voltages, ops) \
99 MC13xxx_DEFINE(REGU, _name, _reg, _vsel_reg, _voltages, ops)
101 #endif