This client driver allows you to use a GPIO pin as a source for PPS
[linux-2.6/next.git] / include / media / s5p_fimc.h
blob9fdff8a4ed2667f36beb2b3d551419f561ba2626
1 /*
2 * Samsung S5P SoC camera interface driver header
4 * Copyright (c) 2010 Samsung Electronics Co., Ltd
5 * Author: Sylwester Nawrocki, <s.nawrocki@samsung.com>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
12 #ifndef S5P_FIMC_H_
13 #define S5P_FIMC_H_
15 enum cam_bus_type {
16 FIMC_ITU_601 = 1,
17 FIMC_ITU_656,
18 FIMC_MIPI_CSI2,
19 FIMC_LCD_WB, /* FIFO link from LCD mixer */
22 #define FIMC_CLK_INV_PCLK (1 << 0)
23 #define FIMC_CLK_INV_VSYNC (1 << 1)
24 #define FIMC_CLK_INV_HREF (1 << 2)
25 #define FIMC_CLK_INV_HSYNC (1 << 3)
27 struct i2c_board_info;
29 /**
30 * struct s5p_fimc_isp_info - image sensor information required for host
31 * interace configuration.
33 * @board_info: pointer to I2C subdevice's board info
34 * @clk_frequency: frequency of the clock the host interface provides to sensor
35 * @bus_type: determines bus type, MIPI, ITU-R BT.601 etc.
36 * @csi_data_align: MIPI-CSI interface data alignment in bits
37 * @i2c_bus_num: i2c control bus id the sensor is attached to
38 * @mux_id: FIMC camera interface multiplexer index (separate for MIPI and ITU)
39 * @flags: flags defining bus signals polarity inversion (High by default)
41 struct s5p_fimc_isp_info {
42 struct i2c_board_info *board_info;
43 unsigned long clk_frequency;
44 enum cam_bus_type bus_type;
45 u16 csi_data_align;
46 u16 i2c_bus_num;
47 u16 mux_id;
48 u16 flags;
51 /**
52 * struct s5p_platform_fimc - camera host interface platform data
54 * @isp_info: properties of camera sensor required for host interface setup
55 * @num_clients: the number of attached image sensors
57 struct s5p_platform_fimc {
58 struct s5p_fimc_isp_info *isp_info;
59 int num_clients;
61 #endif /* S5P_FIMC_H_ */