This client driver allows you to use a GPIO pin as a source for PPS
[linux-2.6/next.git] / net / 802 / fddi.c
blob94b3ad08f39a12ce92d5ccd9d65ade1d01157470
1 /*
2 * INET An implementation of the TCP/IP protocol suite for the LINUX
3 * operating system. INET is implemented using the BSD Socket
4 * interface as the means of communication with the user level.
6 * FDDI-type device handling.
8 * Version: @(#)fddi.c 1.0.0 08/12/96
10 * Authors: Lawrence V. Stefani, <stefani@lkg.dec.com>
12 * fddi.c is based on previous eth.c and tr.c work by
13 * Ross Biro
14 * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
15 * Mark Evans, <evansmp@uhura.aston.ac.uk>
16 * Florian La Roche, <rzsfl@rz.uni-sb.de>
17 * Alan Cox, <gw4pts@gw4pts.ampr.org>
19 * This program is free software; you can redistribute it and/or
20 * modify it under the terms of the GNU General Public License
21 * as published by the Free Software Foundation; either version
22 * 2 of the License, or (at your option) any later version.
24 * Changes
25 * Alan Cox : New arp/rebuild header
26 * Maciej W. Rozycki : IPv6 support
29 #include <linux/module.h>
30 #include <asm/system.h>
31 #include <linux/types.h>
32 #include <linux/kernel.h>
33 #include <linux/string.h>
34 #include <linux/mm.h>
35 #include <linux/socket.h>
36 #include <linux/in.h>
37 #include <linux/inet.h>
38 #include <linux/netdevice.h>
39 #include <linux/fddidevice.h>
40 #include <linux/if_ether.h>
41 #include <linux/skbuff.h>
42 #include <linux/errno.h>
43 #include <net/arp.h>
44 #include <net/sock.h>
47 * Create the FDDI MAC header for an arbitrary protocol layer
49 * saddr=NULL means use device source address
50 * daddr=NULL means leave destination address (eg unresolved arp)
53 static int fddi_header(struct sk_buff *skb, struct net_device *dev,
54 unsigned short type,
55 const void *daddr, const void *saddr, unsigned len)
57 int hl = FDDI_K_SNAP_HLEN;
58 struct fddihdr *fddi;
60 if(type != ETH_P_IP && type != ETH_P_IPV6 && type != ETH_P_ARP)
61 hl=FDDI_K_8022_HLEN-3;
62 fddi = (struct fddihdr *)skb_push(skb, hl);
63 fddi->fc = FDDI_FC_K_ASYNC_LLC_DEF;
64 if(type == ETH_P_IP || type == ETH_P_IPV6 || type == ETH_P_ARP)
66 fddi->hdr.llc_snap.dsap = FDDI_EXTENDED_SAP;
67 fddi->hdr.llc_snap.ssap = FDDI_EXTENDED_SAP;
68 fddi->hdr.llc_snap.ctrl = FDDI_UI_CMD;
69 fddi->hdr.llc_snap.oui[0] = 0x00;
70 fddi->hdr.llc_snap.oui[1] = 0x00;
71 fddi->hdr.llc_snap.oui[2] = 0x00;
72 fddi->hdr.llc_snap.ethertype = htons(type);
75 /* Set the source and destination hardware addresses */
77 if (saddr != NULL)
78 memcpy(fddi->saddr, saddr, dev->addr_len);
79 else
80 memcpy(fddi->saddr, dev->dev_addr, dev->addr_len);
82 if (daddr != NULL)
84 memcpy(fddi->daddr, daddr, dev->addr_len);
85 return hl;
88 return -hl;
93 * Rebuild the FDDI MAC header. This is called after an ARP
94 * (or in future other address resolution) has completed on
95 * this sk_buff. We now let ARP fill in the other fields.
98 static int fddi_rebuild_header(struct sk_buff *skb)
100 struct fddihdr *fddi = (struct fddihdr *)skb->data;
102 #ifdef CONFIG_INET
103 if (fddi->hdr.llc_snap.ethertype == htons(ETH_P_IP))
104 /* Try to get ARP to resolve the header and fill destination address */
105 return arp_find(fddi->daddr, skb);
106 else
107 #endif
109 printk("%s: Don't know how to resolve type %04X addresses.\n",
110 skb->dev->name, ntohs(fddi->hdr.llc_snap.ethertype));
111 return 0;
117 * Determine the packet's protocol ID and fill in skb fields.
118 * This routine is called before an incoming packet is passed
119 * up. It's used to fill in specific skb fields and to set
120 * the proper pointer to the start of packet data (skb->data).
123 __be16 fddi_type_trans(struct sk_buff *skb, struct net_device *dev)
125 struct fddihdr *fddi = (struct fddihdr *)skb->data;
126 __be16 type;
129 * Set mac.raw field to point to FC byte, set data field to point
130 * to start of packet data. Assume 802.2 SNAP frames for now.
133 skb->dev = dev;
134 skb_reset_mac_header(skb); /* point to frame control (FC) */
136 if(fddi->hdr.llc_8022_1.dsap==0xe0)
138 skb_pull(skb, FDDI_K_8022_HLEN-3);
139 type = htons(ETH_P_802_2);
141 else
143 skb_pull(skb, FDDI_K_SNAP_HLEN); /* adjust for 21 byte header */
144 type=fddi->hdr.llc_snap.ethertype;
147 /* Set packet type based on destination address and flag settings */
149 if (*fddi->daddr & 0x01)
151 if (memcmp(fddi->daddr, dev->broadcast, FDDI_K_ALEN) == 0)
152 skb->pkt_type = PACKET_BROADCAST;
153 else
154 skb->pkt_type = PACKET_MULTICAST;
157 else if (dev->flags & IFF_PROMISC)
159 if (memcmp(fddi->daddr, dev->dev_addr, FDDI_K_ALEN))
160 skb->pkt_type = PACKET_OTHERHOST;
163 /* Assume 802.2 SNAP frames, for now */
165 return type;
168 EXPORT_SYMBOL(fddi_type_trans);
170 int fddi_change_mtu(struct net_device *dev, int new_mtu)
172 if ((new_mtu < FDDI_K_SNAP_HLEN) || (new_mtu > FDDI_K_SNAP_DLEN))
173 return -EINVAL;
174 dev->mtu = new_mtu;
175 return 0;
177 EXPORT_SYMBOL(fddi_change_mtu);
179 static const struct header_ops fddi_header_ops = {
180 .create = fddi_header,
181 .rebuild = fddi_rebuild_header,
185 static void fddi_setup(struct net_device *dev)
187 dev->header_ops = &fddi_header_ops;
188 dev->type = ARPHRD_FDDI;
189 dev->hard_header_len = FDDI_K_SNAP_HLEN+3; /* Assume 802.2 SNAP hdr len + 3 pad bytes */
190 dev->mtu = FDDI_K_SNAP_DLEN; /* Assume max payload of 802.2 SNAP frame */
191 dev->addr_len = FDDI_K_ALEN;
192 dev->tx_queue_len = 100; /* Long queues on FDDI */
193 dev->flags = IFF_BROADCAST | IFF_MULTICAST;
195 memset(dev->broadcast, 0xFF, FDDI_K_ALEN);
199 * alloc_fddidev - Register FDDI device
200 * @sizeof_priv: Size of additional driver-private structure to be allocated
201 * for this FDDI device
203 * Fill in the fields of the device structure with FDDI-generic values.
205 * Constructs a new net device, complete with a private data area of
206 * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for
207 * this private data area.
209 struct net_device *alloc_fddidev(int sizeof_priv)
211 return alloc_netdev(sizeof_priv, "fddi%d", fddi_setup);
213 EXPORT_SYMBOL(alloc_fddidev);
215 MODULE_LICENSE("GPL");