powerpc/pmac: Add missing unlocks in error path
[linux-2.6/next.git] / kernel / irq / autoprobe.c
blob2295a31ef110dab62a6e665358a9cb290fbe990e
1 /*
2 * linux/kernel/irq/autoprobe.c
4 * Copyright (C) 1992, 1998-2004 Linus Torvalds, Ingo Molnar
6 * This file contains the interrupt probing code and driver APIs.
7 */
9 #include <linux/irq.h>
10 #include <linux/module.h>
11 #include <linux/interrupt.h>
12 #include <linux/delay.h>
13 #include <linux/async.h>
15 #include "internals.h"
18 * Autodetection depends on the fact that any interrupt that
19 * comes in on to an unassigned handler will get stuck with
20 * "IRQ_WAITING" cleared and the interrupt disabled.
22 static DEFINE_MUTEX(probing_active);
24 /**
25 * probe_irq_on - begin an interrupt autodetect
27 * Commence probing for an interrupt. The interrupts are scanned
28 * and a mask of potential interrupt lines is returned.
31 unsigned long probe_irq_on(void)
33 struct irq_desc *desc;
34 unsigned long mask = 0;
35 unsigned int status;
36 int i;
39 * quiesce the kernel, or at least the asynchronous portion
41 async_synchronize_full();
42 mutex_lock(&probing_active);
44 * something may have generated an irq long ago and we want to
45 * flush such a longstanding irq before considering it as spurious.
47 for_each_irq_desc_reverse(i, desc) {
48 raw_spin_lock_irq(&desc->lock);
49 if (!desc->action && !(desc->status & IRQ_NOPROBE)) {
51 * An old-style architecture might still have
52 * the handle_bad_irq handler there:
54 compat_irq_chip_set_default_handler(desc);
57 * Some chips need to know about probing in
58 * progress:
60 if (desc->chip->set_type)
61 desc->chip->set_type(i, IRQ_TYPE_PROBE);
62 desc->chip->startup(i);
64 raw_spin_unlock_irq(&desc->lock);
67 /* Wait for longstanding interrupts to trigger. */
68 msleep(20);
71 * enable any unassigned irqs
72 * (we must startup again here because if a longstanding irq
73 * happened in the previous stage, it may have masked itself)
75 for_each_irq_desc_reverse(i, desc) {
76 raw_spin_lock_irq(&desc->lock);
77 if (!desc->action && !(desc->status & IRQ_NOPROBE)) {
78 desc->status |= IRQ_AUTODETECT | IRQ_WAITING;
79 if (desc->chip->startup(i))
80 desc->status |= IRQ_PENDING;
82 raw_spin_unlock_irq(&desc->lock);
86 * Wait for spurious interrupts to trigger
88 msleep(100);
91 * Now filter out any obviously spurious interrupts
93 for_each_irq_desc(i, desc) {
94 raw_spin_lock_irq(&desc->lock);
95 status = desc->status;
97 if (status & IRQ_AUTODETECT) {
98 /* It triggered already - consider it spurious. */
99 if (!(status & IRQ_WAITING)) {
100 desc->status = status & ~IRQ_AUTODETECT;
101 desc->chip->shutdown(i);
102 } else
103 if (i < 32)
104 mask |= 1 << i;
106 raw_spin_unlock_irq(&desc->lock);
109 return mask;
111 EXPORT_SYMBOL(probe_irq_on);
114 * probe_irq_mask - scan a bitmap of interrupt lines
115 * @val: mask of interrupts to consider
117 * Scan the interrupt lines and return a bitmap of active
118 * autodetect interrupts. The interrupt probe logic state
119 * is then returned to its previous value.
121 * Note: we need to scan all the irq's even though we will
122 * only return autodetect irq numbers - just so that we reset
123 * them all to a known state.
125 unsigned int probe_irq_mask(unsigned long val)
127 unsigned int status, mask = 0;
128 struct irq_desc *desc;
129 int i;
131 for_each_irq_desc(i, desc) {
132 raw_spin_lock_irq(&desc->lock);
133 status = desc->status;
135 if (status & IRQ_AUTODETECT) {
136 if (i < 16 && !(status & IRQ_WAITING))
137 mask |= 1 << i;
139 desc->status = status & ~IRQ_AUTODETECT;
140 desc->chip->shutdown(i);
142 raw_spin_unlock_irq(&desc->lock);
144 mutex_unlock(&probing_active);
146 return mask & val;
148 EXPORT_SYMBOL(probe_irq_mask);
151 * probe_irq_off - end an interrupt autodetect
152 * @val: mask of potential interrupts (unused)
154 * Scans the unused interrupt lines and returns the line which
155 * appears to have triggered the interrupt. If no interrupt was
156 * found then zero is returned. If more than one interrupt is
157 * found then minus the first candidate is returned to indicate
158 * their is doubt.
160 * The interrupt probe logic state is returned to its previous
161 * value.
163 * BUGS: When used in a module (which arguably shouldn't happen)
164 * nothing prevents two IRQ probe callers from overlapping. The
165 * results of this are non-optimal.
167 int probe_irq_off(unsigned long val)
169 int i, irq_found = 0, nr_of_irqs = 0;
170 struct irq_desc *desc;
171 unsigned int status;
173 for_each_irq_desc(i, desc) {
174 raw_spin_lock_irq(&desc->lock);
175 status = desc->status;
177 if (status & IRQ_AUTODETECT) {
178 if (!(status & IRQ_WAITING)) {
179 if (!nr_of_irqs)
180 irq_found = i;
181 nr_of_irqs++;
183 desc->status = status & ~IRQ_AUTODETECT;
184 desc->chip->shutdown(i);
186 raw_spin_unlock_irq(&desc->lock);
188 mutex_unlock(&probing_active);
190 if (nr_of_irqs > 1)
191 irq_found = -irq_found;
193 return irq_found;
195 EXPORT_SYMBOL(probe_irq_off);