2 * arch/arm/plat-spear/time.c
4 * Copyright (C) 2009 ST Microelectronics
5 * Shiraz Hashim<shiraz.hashim@st.com>
7 * This file is licensed under the terms of the GNU General Public
8 * License version 2. This program is licensed "as is" without any
9 * warranty of any kind, whether express or implied.
12 #include <linux/clk.h>
13 #include <linux/clockchips.h>
14 #include <linux/clocksource.h>
15 #include <linux/err.h>
16 #include <linux/init.h>
17 #include <linux/interrupt.h>
19 #include <linux/kernel.h>
20 #include <linux/time.h>
21 #include <linux/irq.h>
22 #include <asm/mach/time.h>
23 #include <mach/irqs.h>
24 #include <mach/hardware.h>
25 #include <mach/spear.h>
26 #include <mach/generic.h>
29 * We would use TIMER0 and TIMER1 as clockevent and clocksource.
30 * Timer0 and Timer1 both belong to same gpt block in cpu subbsystem. Further
31 * they share same functional clock. Any change in one's functional clock will
32 * also affect other timer.
35 #define CLKEVT 0 /* gpt0, channel0 as clockevent */
36 #define CLKSRC 1 /* gpt0, channel1 as clocksource */
38 /* Register offsets, x is channel number */
39 #define CR(x) ((x) * 0x80 + 0x80)
40 #define IR(x) ((x) * 0x80 + 0x84)
41 #define LOAD(x) ((x) * 0x80 + 0x88)
42 #define COUNT(x) ((x) * 0x80 + 0x8C)
44 /* Reg bit definitions */
45 #define CTRL_INT_ENABLE 0x0100
46 #define CTRL_ENABLE 0x0020
47 #define CTRL_ONE_SHOT 0x0010
49 #define CTRL_PRESCALER1 0x0
50 #define CTRL_PRESCALER2 0x1
51 #define CTRL_PRESCALER4 0x2
52 #define CTRL_PRESCALER8 0x3
53 #define CTRL_PRESCALER16 0x4
54 #define CTRL_PRESCALER32 0x5
55 #define CTRL_PRESCALER64 0x6
56 #define CTRL_PRESCALER128 0x7
57 #define CTRL_PRESCALER256 0x8
59 #define INT_STATUS 0x1
62 * Minimum clocksource/clockevent timer range in seconds
64 #define SPEAR_MIN_RANGE 4
66 static __iomem
void *gpt_base
;
67 static struct clk
*gpt_clk
;
69 static void clockevent_set_mode(enum clock_event_mode mode
,
70 struct clock_event_device
*clk_event_dev
);
71 static int clockevent_next_event(unsigned long evt
,
72 struct clock_event_device
*clk_event_dev
);
74 static cycle_t
clocksource_read_cycles(struct clocksource
*cs
)
76 return (cycle_t
) readw(gpt_base
+ COUNT(CLKSRC
));
79 static struct clocksource clksrc
= {
81 .rating
= 200, /* its a pretty decent clock */
82 .read
= clocksource_read_cycles
,
83 .mask
= 0xFFFF, /* 16 bits */
84 .flags
= CLOCK_SOURCE_IS_CONTINUOUS
,
87 static void spear_clocksource_init(void)
92 /* program the prescaler (/256)*/
93 writew(CTRL_PRESCALER256
, gpt_base
+ CR(CLKSRC
));
95 /* find out actual clock driving Timer */
96 tick_rate
= clk_get_rate(gpt_clk
);
97 tick_rate
>>= CTRL_PRESCALER256
;
99 writew(0xFFFF, gpt_base
+ LOAD(CLKSRC
));
101 val
= readw(gpt_base
+ CR(CLKSRC
));
102 val
&= ~CTRL_ONE_SHOT
; /* autoreload mode */
104 writew(val
, gpt_base
+ CR(CLKSRC
));
106 /* register the clocksource */
107 clocksource_register_hz(&clksrc
, tick_rate
);
110 static struct clock_event_device clkevt
= {
112 .features
= CLOCK_EVT_FEAT_PERIODIC
| CLOCK_EVT_FEAT_ONESHOT
,
113 .set_mode
= clockevent_set_mode
,
114 .set_next_event
= clockevent_next_event
,
115 .shift
= 0, /* to be computed */
118 static void clockevent_set_mode(enum clock_event_mode mode
,
119 struct clock_event_device
*clk_event_dev
)
125 val
= readw(gpt_base
+ CR(CLKEVT
));
127 writew(val
, gpt_base
+ CR(CLKEVT
));
130 case CLOCK_EVT_MODE_PERIODIC
:
131 period
= clk_get_rate(gpt_clk
) / HZ
;
132 period
>>= CTRL_PRESCALER16
;
133 writew(period
, gpt_base
+ LOAD(CLKEVT
));
135 val
= readw(gpt_base
+ CR(CLKEVT
));
136 val
&= ~CTRL_ONE_SHOT
;
137 val
|= CTRL_ENABLE
| CTRL_INT_ENABLE
;
138 writew(val
, gpt_base
+ CR(CLKEVT
));
141 case CLOCK_EVT_MODE_ONESHOT
:
142 val
= readw(gpt_base
+ CR(CLKEVT
));
143 val
|= CTRL_ONE_SHOT
;
144 writew(val
, gpt_base
+ CR(CLKEVT
));
147 case CLOCK_EVT_MODE_UNUSED
:
148 case CLOCK_EVT_MODE_SHUTDOWN
:
149 case CLOCK_EVT_MODE_RESUME
:
153 pr_err("Invalid mode requested\n");
158 static int clockevent_next_event(unsigned long cycles
,
159 struct clock_event_device
*clk_event_dev
)
163 writew(cycles
, gpt_base
+ LOAD(CLKEVT
));
165 val
= readw(gpt_base
+ CR(CLKEVT
));
166 val
|= CTRL_ENABLE
| CTRL_INT_ENABLE
;
167 writew(val
, gpt_base
+ CR(CLKEVT
));
172 static irqreturn_t
spear_timer_interrupt(int irq
, void *dev_id
)
174 struct clock_event_device
*evt
= &clkevt
;
176 writew(INT_STATUS
, gpt_base
+ IR(CLKEVT
));
178 evt
->event_handler(evt
);
183 static struct irqaction spear_timer_irq
= {
185 .flags
= IRQF_DISABLED
| IRQF_TIMER
,
186 .handler
= spear_timer_interrupt
189 static void __init
spear_clockevent_init(void)
193 /* program the prescaler */
194 writew(CTRL_PRESCALER16
, gpt_base
+ CR(CLKEVT
));
196 tick_rate
= clk_get_rate(gpt_clk
);
197 tick_rate
>>= CTRL_PRESCALER16
;
199 clockevents_calc_mult_shift(&clkevt
, tick_rate
, SPEAR_MIN_RANGE
);
201 clkevt
.max_delta_ns
= clockevent_delta2ns(0xfff0,
203 clkevt
.min_delta_ns
= clockevent_delta2ns(3, &clkevt
);
205 clkevt
.cpumask
= cpumask_of(0);
207 clockevents_register_device(&clkevt
);
209 setup_irq(SPEAR_GPT0_CHAN0_IRQ
, &spear_timer_irq
);
212 void __init
spear_setup_timer(void)
214 struct clk
*pll3_clk
;
216 if (!request_mem_region(SPEAR_GPT0_BASE
, SZ_1K
, "gpt0")) {
217 pr_err("%s:cannot get IO addr\n", __func__
);
221 gpt_base
= (void __iomem
*)ioremap(SPEAR_GPT0_BASE
, SZ_1K
);
223 pr_err("%s:ioremap failed for gpt\n", __func__
);
227 gpt_clk
= clk_get_sys("gpt0", NULL
);
229 pr_err("%s:couldn't get clk for gpt\n", __func__
);
233 pll3_clk
= clk_get(NULL
, "pll3_48m_clk");
235 pr_err("%s:couldn't get PLL3 as parent for gpt\n", __func__
);
239 clk_set_parent(gpt_clk
, pll3_clk
);
241 spear_clockevent_init();
242 spear_clocksource_init();
250 release_mem_region(SPEAR_GPT0_BASE
, SZ_1K
);
253 struct sys_timer spear_sys_timer
= {
254 .init
= spear_setup_timer
,