1 /*======================================================================
2 fmvj18x_cs.c 2.8 2002/03/23
4 A fmvj18x (and its compatibles) PCMCIA client driver
6 Contributed by Shingo Fujimoto, shingo@flab.fujitsu.co.jp
8 TDK LAK-CD021 and CONTEC C-NET(PC)C support added by
9 Nobuhiro Katayama, kata-n@po.iijnet.or.jp
11 The PCMCIA client code is based on code written by David Hinds.
12 Network code is based on the "FMV-18x driver" by Yutaka TAMIYA
13 but is actually largely Donald Becker's AT1700 driver, which
14 carries the following attribution:
16 Written 1993-94 by Donald Becker.
18 Copyright 1993 United States Government as represented by the
19 Director, National Security Agency.
21 This software may be used and distributed according to the terms
22 of the GNU General Public License, incorporated herein by reference.
24 The author may be reached as becker@scyld.com, or C/O
25 Scyld Computing Corporation
26 410 Severn Ave., Suite 210
29 ======================================================================*/
31 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
33 #define DRV_NAME "fmvj18x_cs"
34 #define DRV_VERSION "2.9"
36 #include <linux/module.h>
37 #include <linux/kernel.h>
38 #include <linux/init.h>
39 #include <linux/ptrace.h>
40 #include <linux/slab.h>
41 #include <linux/string.h>
42 #include <linux/timer.h>
43 #include <linux/interrupt.h>
45 #include <linux/delay.h>
46 #include <linux/ethtool.h>
47 #include <linux/netdevice.h>
48 #include <linux/etherdevice.h>
49 #include <linux/skbuff.h>
50 #include <linux/if_arp.h>
51 #include <linux/ioport.h>
52 #include <linux/crc32.h>
54 #include <pcmcia/cistpl.h>
55 #include <pcmcia/ciscode.h>
56 #include <pcmcia/ds.h>
58 #include <asm/uaccess.h>
60 #include <asm/system.h>
62 /*====================================================================*/
64 /* Module parameters */
66 MODULE_DESCRIPTION("fmvj18x and compatible PCMCIA ethernet driver");
67 MODULE_LICENSE("GPL");
69 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
71 /* SRAM configuration */
72 /* 0:4KB*2 TX buffer else:8KB*2 TX buffer */
73 INT_MODULE_PARM(sram_config
, 0);
76 /*====================================================================*/
80 static int fmvj18x_config(struct pcmcia_device
*link
);
81 static int fmvj18x_get_hwinfo(struct pcmcia_device
*link
, u_char
*node_id
);
82 static int fmvj18x_setup_mfc(struct pcmcia_device
*link
);
83 static void fmvj18x_release(struct pcmcia_device
*link
);
84 static void fmvj18x_detach(struct pcmcia_device
*p_dev
);
87 LAN controller(MBH86960A) specific routines
89 static int fjn_config(struct net_device
*dev
, struct ifmap
*map
);
90 static int fjn_open(struct net_device
*dev
);
91 static int fjn_close(struct net_device
*dev
);
92 static netdev_tx_t
fjn_start_xmit(struct sk_buff
*skb
,
93 struct net_device
*dev
);
94 static irqreturn_t
fjn_interrupt(int irq
, void *dev_id
);
95 static void fjn_rx(struct net_device
*dev
);
96 static void fjn_reset(struct net_device
*dev
);
97 static void set_rx_mode(struct net_device
*dev
);
98 static void fjn_tx_timeout(struct net_device
*dev
);
99 static const struct ethtool_ops netdev_ethtool_ops
;
104 typedef enum { MBH10302
, MBH10304
, TDK
, CONTEC
, LA501
, UNGERMANN
,
109 driver specific data structure
111 typedef struct local_info_t
{
112 struct pcmcia_device
*p_dev
;
116 u_short tx_queue_len
;
119 u_char __iomem
*base
;
122 #define MC_FILTERBREAK 64
124 /*====================================================================*/
126 ioport offset from the base address
128 #define TX_STATUS 0 /* transmit status register */
129 #define RX_STATUS 1 /* receive status register */
130 #define TX_INTR 2 /* transmit interrupt mask register */
131 #define RX_INTR 3 /* receive interrupt mask register */
132 #define TX_MODE 4 /* transmit mode register */
133 #define RX_MODE 5 /* receive mode register */
134 #define CONFIG_0 6 /* configuration register 0 */
135 #define CONFIG_1 7 /* configuration register 1 */
137 #define NODE_ID 8 /* node ID register (bank 0) */
138 #define MAR_ADR 8 /* multicast address registers (bank 1) */
140 #define DATAPORT 8 /* buffer mem port registers (bank 2) */
141 #define TX_START 10 /* transmit start register */
142 #define COL_CTRL 11 /* 16 collision control register */
143 #define BMPR12 12 /* reserved */
144 #define BMPR13 13 /* reserved */
145 #define RX_SKIP 14 /* skip received packet register */
147 #define LAN_CTRL 16 /* LAN card control register */
149 #define MAC_ID 0x1a /* hardware address */
150 #define UNGERMANN_MAC_ID 0x18 /* UNGERMANN-BASS hardware address */
155 #define ENA_TMT_OK 0x80
156 #define ENA_TMT_REC 0x20
158 #define ENA_16_COL 0x02
159 #define ENA_TBUS_ERR 0x01
161 #define ENA_PKT_RDY 0x80
162 #define ENA_BUS_ERR 0x40
163 #define ENA_LEN_ERR 0x08
164 #define ENA_ALG_ERR 0x04
165 #define ENA_CRC_ERR 0x02
166 #define ENA_OVR_FLO 0x01
169 #define F_TMT_RDY 0x80 /* can accept new packet */
170 #define F_NET_BSY 0x40 /* carrier is detected */
171 #define F_TMT_OK 0x20 /* send packet successfully */
172 #define F_SRT_PKT 0x10 /* short packet error */
173 #define F_COL_ERR 0x04 /* collision error */
174 #define F_16_COL 0x02 /* 16 collision error */
175 #define F_TBUS_ERR 0x01 /* bus read error */
177 #define F_PKT_RDY 0x80 /* packet(s) in buffer */
178 #define F_BUS_ERR 0x40 /* bus read error */
179 #define F_LEN_ERR 0x08 /* short packet */
180 #define F_ALG_ERR 0x04 /* frame error */
181 #define F_CRC_ERR 0x02 /* CRC error */
182 #define F_OVR_FLO 0x01 /* overflow error */
184 #define F_BUF_EMP 0x40 /* receive buffer is empty */
186 #define F_SKP_PKT 0x05 /* drop packet in buffer */
188 /* default bitmaps */
189 #define D_TX_INTR ( ENA_TMT_OK )
190 #define D_RX_INTR ( ENA_PKT_RDY | ENA_LEN_ERR \
191 | ENA_ALG_ERR | ENA_CRC_ERR | ENA_OVR_FLO )
192 #define TX_STAT_M ( F_TMT_RDY )
193 #define RX_STAT_M ( F_PKT_RDY | F_LEN_ERR \
194 | F_ALG_ERR | F_CRC_ERR | F_OVR_FLO )
197 #define D_TX_MODE 0x06 /* no tests, detect carrier */
198 #define ID_MATCHED 0x02 /* (RX_MODE) */
199 #define RECV_ALL 0x03 /* (RX_MODE) */
200 #define CONFIG0_DFL 0x5a /* 16bit bus, 4K x 2 Tx queues */
201 #define CONFIG0_DFL_1 0x5e /* 16bit bus, 8K x 2 Tx queues */
202 #define CONFIG0_RST 0xda /* Data Link Controller off (CONFIG_0) */
203 #define CONFIG0_RST_1 0xde /* Data Link Controller off (CONFIG_0) */
204 #define BANK_0 0xa0 /* bank 0 (CONFIG_1) */
205 #define BANK_1 0xa4 /* bank 1 (CONFIG_1) */
206 #define BANK_2 0xa8 /* bank 2 (CONFIG_1) */
207 #define CHIP_OFF 0x80 /* contrl chip power off (CONFIG_1) */
208 #define DO_TX 0x80 /* do transmit packet */
209 #define SEND_PKT 0x81 /* send a packet */
210 #define AUTO_MODE 0x07 /* Auto skip packet on 16 col detected */
211 #define MANU_MODE 0x03 /* Stop and skip packet on 16 col */
212 #define TDK_AUTO_MODE 0x47 /* Auto skip packet on 16 col detected */
213 #define TDK_MANU_MODE 0x43 /* Stop and skip packet on 16 col */
214 #define INTR_OFF 0x0d /* LAN controller ignores interrupts */
215 #define INTR_ON 0x1d /* LAN controller will catch interrupts */
217 #define TX_TIMEOUT ((400*HZ)/1000)
219 #define BANK_0U 0x20 /* bank 0 (CONFIG_1) */
220 #define BANK_1U 0x24 /* bank 1 (CONFIG_1) */
221 #define BANK_2U 0x28 /* bank 2 (CONFIG_1) */
223 static const struct net_device_ops fjn_netdev_ops
= {
224 .ndo_open
= fjn_open
,
225 .ndo_stop
= fjn_close
,
226 .ndo_start_xmit
= fjn_start_xmit
,
227 .ndo_tx_timeout
= fjn_tx_timeout
,
228 .ndo_set_config
= fjn_config
,
229 .ndo_set_multicast_list
= set_rx_mode
,
230 .ndo_change_mtu
= eth_change_mtu
,
231 .ndo_set_mac_address
= eth_mac_addr
,
232 .ndo_validate_addr
= eth_validate_addr
,
235 static int fmvj18x_probe(struct pcmcia_device
*link
)
238 struct net_device
*dev
;
240 dev_dbg(&link
->dev
, "fmvj18x_attach()\n");
242 /* Make up a FMVJ18x specific data structure */
243 dev
= alloc_etherdev(sizeof(local_info_t
));
246 lp
= netdev_priv(dev
);
251 /* The io structure describes IO port mapping */
252 link
->resource
[0]->end
= 32;
253 link
->resource
[0]->flags
|= IO_DATA_PATH_WIDTH_AUTO
;
255 /* General socket configuration */
256 link
->config_flags
|= CONF_ENABLE_IRQ
;
258 dev
->netdev_ops
= &fjn_netdev_ops
;
259 dev
->watchdog_timeo
= TX_TIMEOUT
;
261 SET_ETHTOOL_OPS(dev
, &netdev_ethtool_ops
);
263 return fmvj18x_config(link
);
264 } /* fmvj18x_attach */
266 /*====================================================================*/
268 static void fmvj18x_detach(struct pcmcia_device
*link
)
270 struct net_device
*dev
= link
->priv
;
272 dev_dbg(&link
->dev
, "fmvj18x_detach\n");
274 unregister_netdev(dev
);
276 fmvj18x_release(link
);
279 } /* fmvj18x_detach */
281 /*====================================================================*/
283 static int mfc_try_io_port(struct pcmcia_device
*link
)
286 static const unsigned int serial_base
[5] =
287 { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
289 for (i
= 0; i
< 5; i
++) {
290 link
->resource
[1]->start
= serial_base
[i
];
291 link
->resource
[1]->flags
|= IO_DATA_PATH_WIDTH_8
;
292 if (link
->resource
[1]->start
== 0) {
293 link
->resource
[1]->end
= 0;
294 pr_notice("out of resource for serial\n");
296 ret
= pcmcia_request_io(link
);
303 static int ungermann_try_io_port(struct pcmcia_device
*link
)
308 Ungermann-Bass Access/CARD accepts 0x300,0x320,0x340,0x360
309 0x380,0x3c0 only for ioport.
311 for (ioaddr
= 0x300; ioaddr
< 0x3e0; ioaddr
+= 0x20) {
312 link
->resource
[0]->start
= ioaddr
;
313 ret
= pcmcia_request_io(link
);
315 /* calculate ConfigIndex value */
317 ((link
->resource
[0]->start
& 0x0f0) >> 3) | 0x22;
321 return ret
; /* RequestIO failed */
324 static int fmvj18x_ioprobe(struct pcmcia_device
*p_dev
, void *priv_data
)
326 return 0; /* strange, but that's what the code did already before... */
329 static int fmvj18x_config(struct pcmcia_device
*link
)
331 struct net_device
*dev
= link
->priv
;
332 local_info_t
*lp
= netdev_priv(dev
);
336 char *card_name
= "unknown";
341 dev_dbg(&link
->dev
, "fmvj18x_config\n");
345 len
= pcmcia_get_tuple(link
, CISTPL_FUNCE
, &buf
);
349 /* Yes, I have CISTPL_FUNCE. Let's check CISTPL_MANFID */
350 ret
= pcmcia_loop_config(link
, fmvj18x_ioprobe
, NULL
);
354 switch (link
->manf_id
) {
357 if (link
->card_id
== PRODID_TDK_GN3410
||
358 link
->card_id
== PRODID_TDK_NP9610
||
359 link
->card_id
== PRODID_TDK_MN3200
) {
360 /* MultiFunction Card */
361 link
->config_base
= 0x800;
362 link
->config_index
= 0x47;
363 link
->resource
[1]->end
= 8;
367 cardtype
= NEC
; /* MultiFunction Card */
368 link
->config_base
= 0x800;
369 link
->config_index
= 0x47;
370 link
->resource
[1]->end
= 8;
373 cardtype
= KME
; /* MultiFunction Card */
374 link
->config_base
= 0x800;
375 link
->config_index
= 0x47;
376 link
->resource
[1]->end
= 8;
382 if (link
->config_base
== 0x0fe0)
384 else if (link
->card_id
== PRODID_FUJITSU_MBH10302
)
385 /* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302),
386 but these are MBH10304 based card. */
388 else if (link
->card_id
== PRODID_FUJITSU_MBH10304
)
398 switch (link
->manf_id
) {
400 if (link
->card_id
== PRODID_FUJITSU_MBH10304
) {
401 cardtype
= XXX10304
; /* MBH10304 with buggy CIS */
402 link
->config_index
= 0x20;
404 cardtype
= MBH10302
; /* NextCom NC5310, etc. */
405 link
->config_index
= 1;
408 case MANFID_UNGERMANN
:
409 cardtype
= UNGERMANN
;
413 link
->config_index
= 1;
417 if (link
->resource
[1]->end
!= 0) {
418 ret
= mfc_try_io_port(link
);
419 if (ret
!= 0) goto failed
;
420 } else if (cardtype
== UNGERMANN
) {
421 ret
= ungermann_try_io_port(link
);
422 if (ret
!= 0) goto failed
;
424 ret
= pcmcia_request_io(link
);
428 ret
= pcmcia_request_irq(link
, fjn_interrupt
);
431 ret
= pcmcia_enable_device(link
);
435 dev
->irq
= link
->irq
;
436 dev
->base_addr
= link
->resource
[0]->start
;
438 if (resource_size(link
->resource
[1]) != 0) {
439 ret
= fmvj18x_setup_mfc(link
);
440 if (ret
!= 0) goto failed
;
443 ioaddr
= dev
->base_addr
;
445 /* Reset controller */
446 if (sram_config
== 0)
447 outb(CONFIG0_RST
, ioaddr
+ CONFIG_0
);
449 outb(CONFIG0_RST_1
, ioaddr
+ CONFIG_0
);
451 /* Power On chip and select bank 0 */
452 if (cardtype
== MBH10302
)
453 outb(BANK_0
, ioaddr
+ CONFIG_1
);
455 outb(BANK_0U
, ioaddr
+ CONFIG_1
);
457 /* Set hardware address */
465 if (cardtype
== MBH10304
) {
466 card_name
= "FMV-J182";
468 len
= pcmcia_get_tuple(link
, CISTPL_FUNCE
, &buf
);
473 /* Read MACID from CIS */
474 for (i
= 5; i
< 11; i
++)
475 dev
->dev_addr
[i
] = buf
[i
];
478 if (pcmcia_get_mac_from_cis(link
, dev
))
480 if( cardtype
== TDK
) {
481 card_name
= "TDK LAK-CD021";
482 } else if( cardtype
== LA501
) {
484 } else if( cardtype
== NEC
) {
485 card_name
= "PK-UG-J001";
486 } else if( cardtype
== KME
) {
487 card_name
= "Panasonic";
489 card_name
= "C-NET(PC)C";
494 /* Read MACID from register */
495 for (i
= 0; i
< 6; i
++)
496 dev
->dev_addr
[i
] = inb(ioaddr
+ UNGERMANN_MAC_ID
+ i
);
497 card_name
= "Access/CARD";
500 /* Read MACID from Buggy CIS */
501 if (fmvj18x_get_hwinfo(link
, buggybuf
) == -1) {
502 pr_notice("unable to read hardware net address\n");
505 for (i
= 0 ; i
< 6; i
++) {
506 dev
->dev_addr
[i
] = buggybuf
[i
];
508 card_name
= "FMV-J182";
512 /* Read MACID from register */
513 for (i
= 0; i
< 6; i
++)
514 dev
->dev_addr
[i
] = inb(ioaddr
+ MAC_ID
+ i
);
515 card_name
= "FMV-J181";
519 lp
->cardtype
= cardtype
;
520 SET_NETDEV_DEV(dev
, &link
->dev
);
522 if (register_netdev(dev
) != 0) {
523 pr_notice("register_netdev() failed\n");
527 /* print current configuration */
528 netdev_info(dev
, "%s, sram %s, port %#3lx, irq %d, hw_addr %pM\n",
529 card_name
, sram_config
== 0 ? "4K TX*2" : "8K TX*2",
530 dev
->base_addr
, dev
->irq
, dev
->dev_addr
);
535 fmvj18x_release(link
);
537 } /* fmvj18x_config */
538 /*====================================================================*/
540 static int fmvj18x_get_hwinfo(struct pcmcia_device
*link
, u_char
*node_id
)
542 u_char __iomem
*base
;
545 /* Allocate a small memory window */
546 link
->resource
[2]->flags
|= WIN_DATA_WIDTH_8
|WIN_MEMORY_TYPE_AM
|WIN_ENABLE
;
547 link
->resource
[2]->start
= 0; link
->resource
[2]->end
= 0;
548 i
= pcmcia_request_window(link
, link
->resource
[2], 0);
552 base
= ioremap(link
->resource
[2]->start
, resource_size(link
->resource
[2]));
553 pcmcia_map_mem_page(link
, link
->resource
[2], 0);
556 * MBH10304 CISTPL_FUNCE_LAN_NODE_ID format
557 * 22 0d xx xx xx 04 06 yy yy yy yy yy yy ff
559 * 'yy' is MAC address.
561 for (i
= 0; i
< 0x200; i
++) {
562 if (readb(base
+i
*2) == 0x22) {
563 if (readb(base
+(i
-1)*2) == 0xff &&
564 readb(base
+(i
+5)*2) == 0x04 &&
565 readb(base
+(i
+6)*2) == 0x06 &&
566 readb(base
+(i
+13)*2) == 0xff)
572 for (j
= 0 ; j
< 6; j
++,i
++) {
573 node_id
[j
] = readb(base
+(i
+7)*2);
578 j
= pcmcia_release_window(link
, link
->resource
[2]);
579 return (i
!= 0x200) ? 0 : -1;
581 } /* fmvj18x_get_hwinfo */
582 /*====================================================================*/
584 static int fmvj18x_setup_mfc(struct pcmcia_device
*link
)
587 struct net_device
*dev
= link
->priv
;
589 local_info_t
*lp
= netdev_priv(dev
);
591 /* Allocate a small memory window */
592 link
->resource
[3]->flags
= WIN_DATA_WIDTH_8
|WIN_MEMORY_TYPE_AM
|WIN_ENABLE
;
593 link
->resource
[3]->start
= link
->resource
[3]->end
= 0;
594 i
= pcmcia_request_window(link
, link
->resource
[3], 0);
598 lp
->base
= ioremap(link
->resource
[3]->start
,
599 resource_size(link
->resource
[3]));
600 if (lp
->base
== NULL
) {
601 netdev_notice(dev
, "ioremap failed\n");
605 i
= pcmcia_map_mem_page(link
, link
->resource
[3], 0);
612 ioaddr
= dev
->base_addr
;
613 writeb(0x47, lp
->base
+0x800); /* Config Option Register of LAN */
614 writeb(0x0, lp
->base
+0x802); /* Config and Status Register */
616 writeb(ioaddr
& 0xff, lp
->base
+0x80a); /* I/O Base(Low) of LAN */
617 writeb((ioaddr
>> 8) & 0xff, lp
->base
+0x80c); /* I/O Base(High) of LAN */
619 writeb(0x45, lp
->base
+0x820); /* Config Option Register of Modem */
620 writeb(0x8, lp
->base
+0x822); /* Config and Status Register */
625 /*====================================================================*/
627 static void fmvj18x_release(struct pcmcia_device
*link
)
630 struct net_device
*dev
= link
->priv
;
631 local_info_t
*lp
= netdev_priv(dev
);
634 dev_dbg(&link
->dev
, "fmvj18x_release\n");
636 if (lp
->base
!= NULL
) {
638 lp
->base
= NULL
; /* set NULL before iounmap */
642 pcmcia_disable_device(link
);
646 static int fmvj18x_suspend(struct pcmcia_device
*link
)
648 struct net_device
*dev
= link
->priv
;
651 netif_device_detach(dev
);
656 static int fmvj18x_resume(struct pcmcia_device
*link
)
658 struct net_device
*dev
= link
->priv
;
662 netif_device_attach(dev
);
668 /*====================================================================*/
670 static struct pcmcia_device_id fmvj18x_ids
[] = {
671 PCMCIA_DEVICE_MANF_CARD(0x0004, 0x0004),
672 PCMCIA_DEVICE_PROD_ID12("EAGLE Technology", "NE200 ETHERNET LAN MBH10302 04", 0x528c88c4, 0x74f91e59),
673 PCMCIA_DEVICE_PROD_ID12("Eiger Labs,Inc", "EPX-10BT PC Card Ethernet 10BT", 0x53af556e, 0x877f9922),
674 PCMCIA_DEVICE_PROD_ID12("Eiger labs,Inc.", "EPX-10BT PC Card Ethernet 10BT", 0xf47e6c66, 0x877f9922),
675 PCMCIA_DEVICE_PROD_ID12("FUJITSU", "LAN Card(FMV-J182)", 0x6ee5a3d8, 0x5baf31db),
676 PCMCIA_DEVICE_PROD_ID12("FUJITSU", "MBH10308", 0x6ee5a3d8, 0x3f04875e),
677 PCMCIA_DEVICE_PROD_ID12("FUJITSU TOWA", "LA501", 0xb8451188, 0x12939ba2),
678 PCMCIA_DEVICE_PROD_ID12("HITACHI", "HT-4840-11", 0xf4f43949, 0x773910f4),
679 PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310B Ver1.0 ", 0x8cef4d3a, 0x075fc7b6),
680 PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310 Ver1.0 ", 0x8cef4d3a, 0xbccf43e6),
681 PCMCIA_DEVICE_PROD_ID12("RATOC System Inc.", "10BASE_T CARD R280", 0x85c10e17, 0xd9413666),
682 PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CD02x", 0x1eae9475, 0x8fa0ee70),
683 PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CF010", 0x1eae9475, 0x7683bc9a),
684 PCMCIA_DEVICE_PROD_ID1("CONTEC Co.,Ltd.", 0x58d8fee2),
685 PCMCIA_DEVICE_PROD_ID1("PCMCIA LAN MBH10304 ES", 0x2599f454),
686 PCMCIA_DEVICE_PROD_ID1("PCMCIA MBH10302", 0x8f4005da),
687 PCMCIA_DEVICE_PROD_ID1("UBKK,V2.0", 0x90888080),
688 PCMCIA_PFC_DEVICE_PROD_ID12(0, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
689 PCMCIA_PFC_DEVICE_PROD_ID12(0, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
690 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0d0a),
691 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0e0a),
692 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0e01),
693 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0a05),
694 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x1101),
697 MODULE_DEVICE_TABLE(pcmcia
, fmvj18x_ids
);
699 static struct pcmcia_driver fmvj18x_cs_driver
= {
700 .owner
= THIS_MODULE
,
701 .name
= "fmvj18x_cs",
702 .probe
= fmvj18x_probe
,
703 .remove
= fmvj18x_detach
,
704 .id_table
= fmvj18x_ids
,
705 .suspend
= fmvj18x_suspend
,
706 .resume
= fmvj18x_resume
,
709 static int __init
init_fmvj18x_cs(void)
711 return pcmcia_register_driver(&fmvj18x_cs_driver
);
714 static void __exit
exit_fmvj18x_cs(void)
716 pcmcia_unregister_driver(&fmvj18x_cs_driver
);
719 module_init(init_fmvj18x_cs
);
720 module_exit(exit_fmvj18x_cs
);
722 /*====================================================================*/
724 static irqreturn_t
fjn_interrupt(int dummy
, void *dev_id
)
726 struct net_device
*dev
= dev_id
;
727 local_info_t
*lp
= netdev_priv(dev
);
729 unsigned short tx_stat
, rx_stat
;
731 ioaddr
= dev
->base_addr
;
733 /* avoid multiple interrupts */
734 outw(0x0000, ioaddr
+ TX_INTR
);
736 /* wait for a while */
740 tx_stat
= inb(ioaddr
+ TX_STATUS
);
741 rx_stat
= inb(ioaddr
+ RX_STATUS
);
744 outb(tx_stat
, ioaddr
+ TX_STATUS
);
745 outb(rx_stat
, ioaddr
+ RX_STATUS
);
747 pr_debug("%s: interrupt, rx_status %02x.\n", dev
->name
, rx_stat
);
748 pr_debug(" tx_status %02x.\n", tx_stat
);
750 if (rx_stat
|| (inb(ioaddr
+ RX_MODE
) & F_BUF_EMP
) == 0) {
751 /* there is packet(s) in rx buffer */
754 if (tx_stat
& F_TMT_RDY
) {
755 dev
->stats
.tx_packets
+= lp
->sent
;
758 outb(DO_TX
| lp
->tx_queue
, ioaddr
+ TX_START
);
759 lp
->sent
= lp
->tx_queue
;
761 lp
->tx_queue_len
= 0;
762 dev
->trans_start
= jiffies
;
766 netif_wake_queue(dev
);
768 pr_debug("%s: exiting interrupt,\n", dev
->name
);
769 pr_debug(" tx_status %02x, rx_status %02x.\n", tx_stat
, rx_stat
);
771 outb(D_TX_INTR
, ioaddr
+ TX_INTR
);
772 outb(D_RX_INTR
, ioaddr
+ RX_INTR
);
774 if (lp
->base
!= NULL
) {
775 /* Ack interrupt for multifunction card */
776 writeb(0x01, lp
->base
+0x802);
777 writeb(0x09, lp
->base
+0x822);
782 } /* fjn_interrupt */
784 /*====================================================================*/
786 static void fjn_tx_timeout(struct net_device
*dev
)
788 struct local_info_t
*lp
= netdev_priv(dev
);
789 unsigned int ioaddr
= dev
->base_addr
;
791 netdev_notice(dev
, "transmit timed out with status %04x, %s?\n",
792 htons(inw(ioaddr
+ TX_STATUS
)),
793 inb(ioaddr
+ TX_STATUS
) & F_TMT_RDY
794 ? "IRQ conflict" : "network cable problem");
795 netdev_notice(dev
, "timeout registers: %04x %04x %04x "
796 "%04x %04x %04x %04x %04x.\n",
797 htons(inw(ioaddr
+ 0)), htons(inw(ioaddr
+ 2)),
798 htons(inw(ioaddr
+ 4)), htons(inw(ioaddr
+ 6)),
799 htons(inw(ioaddr
+ 8)), htons(inw(ioaddr
+ 10)),
800 htons(inw(ioaddr
+ 12)), htons(inw(ioaddr
+ 14)));
801 dev
->stats
.tx_errors
++;
802 /* ToDo: We should try to restart the adaptor... */
808 lp
->tx_queue_len
= 0;
810 lp
->open_time
= jiffies
;
812 netif_wake_queue(dev
);
815 static netdev_tx_t
fjn_start_xmit(struct sk_buff
*skb
,
816 struct net_device
*dev
)
818 struct local_info_t
*lp
= netdev_priv(dev
);
819 unsigned int ioaddr
= dev
->base_addr
;
820 short length
= skb
->len
;
822 if (length
< ETH_ZLEN
)
824 if (skb_padto(skb
, ETH_ZLEN
))
829 netif_stop_queue(dev
);
832 unsigned char *buf
= skb
->data
;
834 if (length
> ETH_FRAME_LEN
) {
835 netdev_notice(dev
, "Attempting to send a large packet (%d bytes)\n",
837 return NETDEV_TX_BUSY
;
840 netdev_dbg(dev
, "Transmitting a packet of length %lu\n",
841 (unsigned long)skb
->len
);
842 dev
->stats
.tx_bytes
+= skb
->len
;
844 /* Disable both interrupts. */
845 outw(0x0000, ioaddr
+ TX_INTR
);
847 /* wait for a while */
850 outw(length
, ioaddr
+ DATAPORT
);
851 outsw(ioaddr
+ DATAPORT
, buf
, (length
+ 1) >> 1);
854 lp
->tx_queue_len
+= ((length
+3) & ~1);
856 if (lp
->tx_started
== 0) {
857 /* If the Tx is idle, always trigger a transmit. */
858 outb(DO_TX
| lp
->tx_queue
, ioaddr
+ TX_START
);
859 lp
->sent
= lp
->tx_queue
;
861 lp
->tx_queue_len
= 0;
863 netif_start_queue(dev
);
865 if( sram_config
== 0 ) {
866 if (lp
->tx_queue_len
< (4096 - (ETH_FRAME_LEN
+2)) )
867 /* Yes, there is room for one more packet. */
868 netif_start_queue(dev
);
870 if (lp
->tx_queue_len
< (8192 - (ETH_FRAME_LEN
+2)) &&
872 /* Yes, there is room for one more packet. */
873 netif_start_queue(dev
);
877 /* Re-enable interrupts */
878 outb(D_TX_INTR
, ioaddr
+ TX_INTR
);
879 outb(D_RX_INTR
, ioaddr
+ RX_INTR
);
884 } /* fjn_start_xmit */
886 /*====================================================================*/
888 static void fjn_reset(struct net_device
*dev
)
890 struct local_info_t
*lp
= netdev_priv(dev
);
891 unsigned int ioaddr
= dev
->base_addr
;
894 netdev_dbg(dev
, "fjn_reset() called\n");
896 /* Reset controller */
897 if( sram_config
== 0 )
898 outb(CONFIG0_RST
, ioaddr
+ CONFIG_0
);
900 outb(CONFIG0_RST_1
, ioaddr
+ CONFIG_0
);
902 /* Power On chip and select bank 0 */
903 if (lp
->cardtype
== MBH10302
)
904 outb(BANK_0
, ioaddr
+ CONFIG_1
);
906 outb(BANK_0U
, ioaddr
+ CONFIG_1
);
909 outb(D_TX_MODE
, ioaddr
+ TX_MODE
);
911 outb(ID_MATCHED
, ioaddr
+ RX_MODE
);
913 /* Set hardware address */
914 for (i
= 0; i
< 6; i
++)
915 outb(dev
->dev_addr
[i
], ioaddr
+ NODE_ID
+ i
);
917 /* (re)initialize the multicast table */
920 /* Switch to bank 2 (runtime mode) */
921 if (lp
->cardtype
== MBH10302
)
922 outb(BANK_2
, ioaddr
+ CONFIG_1
);
924 outb(BANK_2U
, ioaddr
+ CONFIG_1
);
926 /* set 16col ctrl bits */
927 if( lp
->cardtype
== TDK
|| lp
->cardtype
== CONTEC
)
928 outb(TDK_AUTO_MODE
, ioaddr
+ COL_CTRL
);
930 outb(AUTO_MODE
, ioaddr
+ COL_CTRL
);
932 /* clear Reserved Regs */
933 outb(0x00, ioaddr
+ BMPR12
);
934 outb(0x00, ioaddr
+ BMPR13
);
936 /* reset Skip packet reg. */
937 outb(0x01, ioaddr
+ RX_SKIP
);
939 /* Enable Tx and Rx */
940 if( sram_config
== 0 )
941 outb(CONFIG0_DFL
, ioaddr
+ CONFIG_0
);
943 outb(CONFIG0_DFL_1
, ioaddr
+ CONFIG_0
);
945 /* Init receive pointer ? */
946 inw(ioaddr
+ DATAPORT
);
947 inw(ioaddr
+ DATAPORT
);
949 /* Clear all status */
950 outb(0xff, ioaddr
+ TX_STATUS
);
951 outb(0xff, ioaddr
+ RX_STATUS
);
953 if (lp
->cardtype
== MBH10302
)
954 outb(INTR_OFF
, ioaddr
+ LAN_CTRL
);
956 /* Turn on Rx interrupts */
957 outb(D_TX_INTR
, ioaddr
+ TX_INTR
);
958 outb(D_RX_INTR
, ioaddr
+ RX_INTR
);
960 /* Turn on interrupts from LAN card controller */
961 if (lp
->cardtype
== MBH10302
)
962 outb(INTR_ON
, ioaddr
+ LAN_CTRL
);
965 /*====================================================================*/
967 static void fjn_rx(struct net_device
*dev
)
969 unsigned int ioaddr
= dev
->base_addr
;
970 int boguscount
= 10; /* 5 -> 10: by agy 19940922 */
972 pr_debug("%s: in rx_packet(), rx_status %02x.\n",
973 dev
->name
, inb(ioaddr
+ RX_STATUS
));
975 while ((inb(ioaddr
+ RX_MODE
) & F_BUF_EMP
) == 0) {
976 u_short status
= inw(ioaddr
+ DATAPORT
);
978 netdev_dbg(dev
, "Rxing packet mode %02x status %04x.\n",
979 inb(ioaddr
+ RX_MODE
), status
);
980 #ifndef final_version
982 outb(F_SKP_PKT
, ioaddr
+ RX_SKIP
);
986 if ((status
& 0xF0) != 0x20) { /* There was an error. */
987 dev
->stats
.rx_errors
++;
988 if (status
& F_LEN_ERR
) dev
->stats
.rx_length_errors
++;
989 if (status
& F_ALG_ERR
) dev
->stats
.rx_frame_errors
++;
990 if (status
& F_CRC_ERR
) dev
->stats
.rx_crc_errors
++;
991 if (status
& F_OVR_FLO
) dev
->stats
.rx_over_errors
++;
993 u_short pkt_len
= inw(ioaddr
+ DATAPORT
);
994 /* Malloc up new buffer. */
997 if (pkt_len
> 1550) {
998 netdev_notice(dev
, "The FMV-18x claimed a very large packet, size %d\n",
1000 outb(F_SKP_PKT
, ioaddr
+ RX_SKIP
);
1001 dev
->stats
.rx_errors
++;
1004 skb
= dev_alloc_skb(pkt_len
+2);
1006 netdev_notice(dev
, "Memory squeeze, dropping packet (len %d)\n",
1008 outb(F_SKP_PKT
, ioaddr
+ RX_SKIP
);
1009 dev
->stats
.rx_dropped
++;
1013 skb_reserve(skb
, 2);
1014 insw(ioaddr
+ DATAPORT
, skb_put(skb
, pkt_len
),
1015 (pkt_len
+ 1) >> 1);
1016 skb
->protocol
= eth_type_trans(skb
, dev
);
1020 pr_debug("%s: Rxed packet of length %d: ",
1021 dev
->name
, pkt_len
);
1022 for (i
= 0; i
< 14; i
++)
1023 pr_debug(" %02x", skb
->data
[i
]);
1028 dev
->stats
.rx_packets
++;
1029 dev
->stats
.rx_bytes
+= pkt_len
;
1031 if (--boguscount
<= 0)
1035 /* If any worth-while packets have been received, dev_rint()
1036 has done a netif_wake_queue() for us and will work on them
1037 when we get to the bottom-half routine. */
1039 if (lp->cardtype != TDK) {
1041 for (i = 0; i < 20; i++) {
1042 if ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == F_BUF_EMP)
1044 (void)inw(ioaddr + DATAPORT); /+ dummy status read +/
1045 outb(F_SKP_PKT, ioaddr + RX_SKIP);
1049 pr_debug("%s: Exint Rx packet with mode %02x after "
1050 "%d ticks.\n", dev->name, inb(ioaddr + RX_MODE), i);
1055 /*====================================================================*/
1057 static void netdev_get_drvinfo(struct net_device
*dev
,
1058 struct ethtool_drvinfo
*info
)
1060 strcpy(info
->driver
, DRV_NAME
);
1061 strcpy(info
->version
, DRV_VERSION
);
1062 sprintf(info
->bus_info
, "PCMCIA 0x%lx", dev
->base_addr
);
1065 static const struct ethtool_ops netdev_ethtool_ops
= {
1066 .get_drvinfo
= netdev_get_drvinfo
,
1069 static int fjn_config(struct net_device
*dev
, struct ifmap
*map
){
1073 static int fjn_open(struct net_device
*dev
)
1075 struct local_info_t
*lp
= netdev_priv(dev
);
1076 struct pcmcia_device
*link
= lp
->p_dev
;
1078 pr_debug("fjn_open('%s').\n", dev
->name
);
1080 if (!pcmcia_dev_present(link
))
1089 lp
->tx_queue_len
= 0;
1090 lp
->open_time
= jiffies
;
1091 netif_start_queue(dev
);
1096 /*====================================================================*/
1098 static int fjn_close(struct net_device
*dev
)
1100 struct local_info_t
*lp
= netdev_priv(dev
);
1101 struct pcmcia_device
*link
= lp
->p_dev
;
1102 unsigned int ioaddr
= dev
->base_addr
;
1104 pr_debug("fjn_close('%s').\n", dev
->name
);
1107 netif_stop_queue(dev
);
1109 /* Set configuration register 0 to disable Tx and Rx. */
1110 if( sram_config
== 0 )
1111 outb(CONFIG0_RST
,ioaddr
+ CONFIG_0
);
1113 outb(CONFIG0_RST_1
,ioaddr
+ CONFIG_0
);
1115 /* Update the statistics -- ToDo. */
1117 /* Power-down the chip. Green, green, green! */
1118 outb(CHIP_OFF
,ioaddr
+ CONFIG_1
);
1120 /* Set the ethernet adaptor disable IRQ */
1121 if (lp
->cardtype
== MBH10302
)
1122 outb(INTR_OFF
, ioaddr
+ LAN_CTRL
);
1129 /*====================================================================*/
1132 Set the multicast/promiscuous mode for this adaptor.
1135 static void set_rx_mode(struct net_device
*dev
)
1137 unsigned int ioaddr
= dev
->base_addr
;
1138 u_char mc_filter
[8]; /* Multicast hash filter */
1143 int saved_config_0
= inb(ioaddr
+ CONFIG_0
);
1145 local_irq_save(flags
);
1147 /* Disable Tx and Rx */
1148 if (sram_config
== 0)
1149 outb(CONFIG0_RST
, ioaddr
+ CONFIG_0
);
1151 outb(CONFIG0_RST_1
, ioaddr
+ CONFIG_0
);
1153 if (dev
->flags
& IFF_PROMISC
) {
1154 memset(mc_filter
, 0xff, sizeof(mc_filter
));
1155 outb(3, ioaddr
+ RX_MODE
); /* Enable promiscuous mode */
1156 } else if (netdev_mc_count(dev
) > MC_FILTERBREAK
||
1157 (dev
->flags
& IFF_ALLMULTI
)) {
1158 /* Too many to filter perfectly -- accept all multicasts. */
1159 memset(mc_filter
, 0xff, sizeof(mc_filter
));
1160 outb(2, ioaddr
+ RX_MODE
); /* Use normal mode. */
1161 } else if (netdev_mc_empty(dev
)) {
1162 memset(mc_filter
, 0x00, sizeof(mc_filter
));
1163 outb(1, ioaddr
+ RX_MODE
); /* Ignore almost all multicasts. */
1165 struct netdev_hw_addr
*ha
;
1167 memset(mc_filter
, 0, sizeof(mc_filter
));
1168 netdev_for_each_mc_addr(ha
, dev
) {
1169 unsigned int bit
= ether_crc_le(ETH_ALEN
, ha
->addr
) >> 26;
1170 mc_filter
[bit
>> 3] |= (1 << (bit
& 7));
1172 outb(2, ioaddr
+ RX_MODE
); /* Use normal mode. */
1175 /* Switch to bank 1 and set the multicast table. */
1176 saved_bank
= inb(ioaddr
+ CONFIG_1
);
1177 outb(0xe4, ioaddr
+ CONFIG_1
);
1179 for (i
= 0; i
< 8; i
++)
1180 outb(mc_filter
[i
], ioaddr
+ MAR_ADR
+ i
);
1181 outb(saved_bank
, ioaddr
+ CONFIG_1
);
1183 outb(saved_config_0
, ioaddr
+ CONFIG_0
);
1185 local_irq_restore(flags
);