?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
proc: use seq_puts()/seq_putc() where possible
[linux-2.6/next.git] / drivers / net / wan / n2.c
blob17d408fe693f6233437d1016bae2d294f80a380b
1 /*
2 * SDL Inc. RISCom/N2 synchronous serial card driver for Linux
3 *
4 * Copyright (C) 1998-2003 Krzysztof Halasa <khc@pm.waw.pl>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of version 2 of the GNU General Public License
8 * as published by the Free Software Foundation.
9 *
10 * For information see <http://www.kernel.org/pub/linux/utils/net/hdlc/>
11 *
12 * Note: integrated CSU/DSU/DDS are not supported by this driver
13 *
14 * Sources of information:
15 * Hitachi HD64570 SCA User's Manual
16 * SDL Inc. PPP/HDLC/CISCO driver
17 */
18
19 #include <linux/module.h>
20 #include <linux/kernel.h>
21 #include <linux/capability.h>
22 #include <linux/slab.h>
23 #include <linux/types.h>
24 #include <linux/fcntl.h>
25 #include <linux/in.h>
26 #include <linux/string.h>
27 #include <linux/errno.h>
28 #include <linux/init.h>
29 #include <linux/ioport.h>
30 #include <linux/moduleparam.h>
31 #include <linux/netdevice.h>
32 #include <linux/hdlc.h>
33 #include <asm/io.h>
34 #include "hd64570.h"
35
36
37 static const char* version = "SDL RISCom/N2 driver version: 1.15";
38 static const char* devname = "RISCom/N2";
39
40 #undef DEBUG_PKT
41 #define DEBUG_RINGS
42
43 #define USE_WINDOWSIZE 16384
44 #define USE_BUS16BITS 1
45 #define CLOCK_BASE 9830400 /* 9.8304 MHz */
46 #define MAX_PAGES 16 /* 16 RAM pages at max */
47 #define MAX_RAM_SIZE 0x80000 /* 512 KB */
48 #if MAX_RAM_SIZE > MAX_PAGES * USE_WINDOWSIZE
49 #undef MAX_RAM_SIZE
50 #define MAX_RAM_SIZE (MAX_PAGES * USE_WINDOWSIZE)
51 #endif
52 #define N2_IOPORTS 0x10
53 #define NEED_DETECT_RAM
54 #define NEED_SCA_MSCI_INTR
55 #define MAX_TX_BUFFERS 10
56
57 static char *hw; /* pointer to hw=xxx command line string */
58
59 /* RISCom/N2 Board Registers */
60
61 /* PC Control Register */
62 #define N2_PCR 0
63 #define PCR_RUNSCA 1 /* Run 64570 */
64 #define PCR_VPM 2 /* Enable VPM - needed if using RAM above 1 MB */
65 #define PCR_ENWIN 4 /* Open window */
66 #define PCR_BUS16 8 /* 16-bit bus */
67
68
69 /* Memory Base Address Register */
70 #define N2_BAR 2
71
72
73 /* Page Scan Register */
74 #define N2_PSR 4
75 #define WIN16K 0x00
76 #define WIN32K 0x20
77 #define WIN64K 0x40
78 #define PSR_WINBITS 0x60
79 #define PSR_DMAEN 0x80
80 #define PSR_PAGEBITS 0x0F
81
82
83 /* Modem Control Reg */
84 #define N2_MCR 6
85 #define CLOCK_OUT_PORT1 0x80
86 #define CLOCK_OUT_PORT0 0x40
87 #define TX422_PORT1 0x20
88 #define TX422_PORT0 0x10
89 #define DSR_PORT1 0x08
90 #define DSR_PORT0 0x04
91 #define DTR_PORT1 0x02
92 #define DTR_PORT0 0x01
93
94
95 typedef struct port_s {
96 struct net_device *dev;
97 struct card_s *card;
98 spinlock_t lock; /* TX lock */
99 sync_serial_settings settings;
100 int valid; /* port enabled */
101 int rxpart; /* partial frame received, next frame invalid*/
102 unsigned short encoding;
103 unsigned short parity;
104 u16 rxin; /* rx ring buffer 'in' pointer */
105 u16 txin; /* tx ring buffer 'in' and 'last' pointers */
106 u16 txlast;
107 u8 rxs, txs, tmc; /* SCA registers */
108 u8 phy_node; /* physical port # - 0 or 1 */
109 u8 log_node; /* logical port # */
110 }port_t;
111
112
113
114 typedef struct card_s {
115 u8 __iomem *winbase; /* ISA window base address */
116 u32 phy_winbase; /* ISA physical base address */
117 u32 ram_size; /* number of bytes */
118 u16 io; /* IO Base address */
119 u16 buff_offset; /* offset of first buffer of first channel */
120 u16 rx_ring_buffers; /* number of buffers in a ring */
121 u16 tx_ring_buffers;
122 u8 irq; /* IRQ (3-15) */
123
124 port_t ports[2];
125 struct card_s *next_card;
126 }card_t;
127
128
129 static card_t *first_card;
130 static card_t **new_card = &first_card;
131
132
133 #define sca_reg(reg, card) (0x8000 | (card)->io | \
134 ((reg) & 0x0F) | (((reg) & 0xF0) << 6))
135 #define sca_in(reg, card) inb(sca_reg(reg, card))
136 #define sca_out(value, reg, card) outb(value, sca_reg(reg, card))
137 #define sca_inw(reg, card) inw(sca_reg(reg, card))
138 #define sca_outw(value, reg, card) outw(value, sca_reg(reg, card))
139
140 #define port_to_card(port) ((port)->card)
141 #define log_node(port) ((port)->log_node)
142 #define phy_node(port) ((port)->phy_node)
143 #define winsize(card) (USE_WINDOWSIZE)
144 #define winbase(card) ((card)->winbase)
145 #define get_port(card, port) ((card)->ports[port].valid ? \
146 &(card)->ports[port] : NULL)
147
148
149 static __inline__ u8 sca_get_page(card_t *card)
150 {
151 return inb(card->io + N2_PSR) & PSR_PAGEBITS;
152 }
153
154
155 static __inline__ void openwin(card_t *card, u8 page)
156 {
157 u8 psr = inb(card->io + N2_PSR);
158 outb((psr & ~PSR_PAGEBITS) | page, card->io + N2_PSR);
159 }
160
161
162 #include "hd64570.c"
163
164
165 static void n2_set_iface(port_t *port)
166 {
167 card_t *card = port->card;
168 int io = card->io;
169 u8 mcr = inb(io + N2_MCR);
170 u8 msci = get_msci(port);
171 u8 rxs = port->rxs & CLK_BRG_MASK;
172 u8 txs = port->txs & CLK_BRG_MASK;
173
174 switch(port->settings.clock_type) {
175 case CLOCK_INT:
176 mcr |= port->phy_node ? CLOCK_OUT_PORT1 : CLOCK_OUT_PORT0;
177 rxs |= CLK_BRG_RX; /* BRG output */
178 txs |= CLK_RXCLK_TX; /* RX clock */
179 break;
180
181 case CLOCK_TXINT:
182 mcr |= port->phy_node ? CLOCK_OUT_PORT1 : CLOCK_OUT_PORT0;
183 rxs |= CLK_LINE_RX; /* RXC input */
184 txs |= CLK_BRG_TX; /* BRG output */
185 break;
186
187 case CLOCK_TXFROMRX:
188 mcr |= port->phy_node ? CLOCK_OUT_PORT1 : CLOCK_OUT_PORT0;
189 rxs |= CLK_LINE_RX; /* RXC input */
190 txs |= CLK_RXCLK_TX; /* RX clock */
191 break;
192
193 default: /* Clock EXTernal */
194 mcr &= port->phy_node ? ~CLOCK_OUT_PORT1 : ~CLOCK_OUT_PORT0;
195 rxs |= CLK_LINE_RX; /* RXC input */
196 txs |= CLK_LINE_TX; /* TXC input */
197 }
198
199 outb(mcr, io + N2_MCR);
200 port->rxs = rxs;
201 port->txs = txs;
202 sca_out(rxs, msci + RXS, card);
203 sca_out(txs, msci + TXS, card);
204 sca_set_port(port);
205 }
206
207
208
209 static int n2_open(struct net_device *dev)
210 {
211 port_t *port = dev_to_port(dev);
212 int io = port->card->io;
213 u8 mcr = inb(io + N2_MCR) | (port->phy_node ? TX422_PORT1:TX422_PORT0);
214 int result;
215
216 result = hdlc_open(dev);
217 if (result)
218 return result;
219
220 mcr &= port->phy_node ? ~DTR_PORT1 : ~DTR_PORT0; /* set DTR ON */
221 outb(mcr, io + N2_MCR);
222
223 outb(inb(io + N2_PCR) | PCR_ENWIN, io + N2_PCR); /* open window */
224 outb(inb(io + N2_PSR) | PSR_DMAEN, io + N2_PSR); /* enable dma */
225 sca_open(dev);
226 n2_set_iface(port);
227 return 0;
228 }
229
230
231
232 static int n2_close(struct net_device *dev)
233 {
234 port_t *port = dev_to_port(dev);
235 int io = port->card->io;
236 u8 mcr = inb(io+N2_MCR) | (port->phy_node ? TX422_PORT1 : TX422_PORT0);
237
238 sca_close(dev);
239 mcr |= port->phy_node ? DTR_PORT1 : DTR_PORT0; /* set DTR OFF */
240 outb(mcr, io + N2_MCR);
241 hdlc_close(dev);
242 return 0;
243 }
244
245
246
247 static int n2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
248 {
249 const size_t size = sizeof(sync_serial_settings);
250 sync_serial_settings new_line;
251 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
252 port_t *port = dev_to_port(dev);
253
254 #ifdef DEBUG_RINGS
255 if (cmd == SIOCDEVPRIVATE) {
256 sca_dump_rings(dev);
257 return 0;
258 }
259 #endif
260 if (cmd != SIOCWANDEV)
261 return hdlc_ioctl(dev, ifr, cmd);
262
263 switch(ifr->ifr_settings.type) {
264 case IF_GET_IFACE:
265 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
266 if (ifr->ifr_settings.size < size) {
267 ifr->ifr_settings.size = size; /* data size wanted */
268 return -ENOBUFS;
269 }
270 if (copy_to_user(line, &port->settings, size))
271 return -EFAULT;
272 return 0;
273
274 case IF_IFACE_SYNC_SERIAL:
275 if(!capable(CAP_NET_ADMIN))
276 return -EPERM;
277
278 if (copy_from_user(&new_line, line, size))
279 return -EFAULT;
280
281 if (new_line.clock_type != CLOCK_EXT &&
282 new_line.clock_type != CLOCK_TXFROMRX &&
283 new_line.clock_type != CLOCK_INT &&
284 new_line.clock_type != CLOCK_TXINT)
285 return -EINVAL; /* No such clock setting */
286
287 if (new_line.loopback != 0 && new_line.loopback != 1)
288 return -EINVAL;
289
290 memcpy(&port->settings, &new_line, size); /* Update settings */
291 n2_set_iface(port);
292 return 0;
293
294 default:
295 return hdlc_ioctl(dev, ifr, cmd);
296 }
297 }
298
299
300
301 static void n2_destroy_card(card_t *card)
302 {
303 int cnt;
304
305 for (cnt = 0; cnt < 2; cnt++)
306 if (card->ports[cnt].card) {
307 struct net_device *dev = port_to_dev(&card->ports[cnt]);
308 unregister_hdlc_device(dev);
309 }
310
311 if (card->irq)
312 free_irq(card->irq, card);
313
314 if (card->winbase) {
315 iounmap(card->winbase);
316 release_mem_region(card->phy_winbase, USE_WINDOWSIZE);
317 }
318
319 if (card->io)
320 release_region(card->io, N2_IOPORTS);
321 if (card->ports[0].dev)
322 free_netdev(card->ports[0].dev);
323 if (card->ports[1].dev)
324 free_netdev(card->ports[1].dev);
325 kfree(card);
326 }
327
328 static const struct net_device_ops n2_ops = {
329 .ndo_open = n2_open,
330 .ndo_stop = n2_close,
331 .ndo_change_mtu = hdlc_change_mtu,
332 .ndo_start_xmit = hdlc_start_xmit,
333 .ndo_do_ioctl = n2_ioctl,
334 };
335
336 static int __init n2_run(unsigned long io, unsigned long irq,
337 unsigned long winbase, long valid0, long valid1)
338 {
339 card_t *card;
340 u8 cnt, pcr;
341 int i;
342
343 if (io < 0x200 || io > 0x3FF || (io % N2_IOPORTS) != 0) {
344 printk(KERN_ERR "n2: invalid I/O port value\n");
345 return -ENODEV;
346 }
347
348 if (irq < 3 || irq > 15 || irq == 6) /* FIXME */ {
349 printk(KERN_ERR "n2: invalid IRQ value\n");
350 return -ENODEV;
351 }
352
353 if (winbase < 0xA0000 || winbase > 0xFFFFF || (winbase & 0xFFF) != 0) {
354 printk(KERN_ERR "n2: invalid RAM value\n");
355 return -ENODEV;
356 }
357
358 card = kzalloc(sizeof(card_t), GFP_KERNEL);
359 if (card == NULL) {
360 printk(KERN_ERR "n2: unable to allocate memory\n");
361 return -ENOBUFS;
362 }
363
364 card->ports[0].dev = alloc_hdlcdev(&card->ports[0]);
365 card->ports[1].dev = alloc_hdlcdev(&card->ports[1]);
366 if (!card->ports[0].dev || !card->ports[1].dev) {
367 printk(KERN_ERR "n2: unable to allocate memory\n");
368 n2_destroy_card(card);
369 return -ENOMEM;
370 }
371
372 if (!request_region(io, N2_IOPORTS, devname)) {
373 printk(KERN_ERR "n2: I/O port region in use\n");
374 n2_destroy_card(card);
375 return -EBUSY;
376 }
377 card->io = io;
378
379 if (request_irq(irq, sca_intr, 0, devname, card)) {
380 printk(KERN_ERR "n2: could not allocate IRQ\n");
381 n2_destroy_card(card);
382 return -EBUSY;
383 }
384 card->irq = irq;
385
386 if (!request_mem_region(winbase, USE_WINDOWSIZE, devname)) {
387 printk(KERN_ERR "n2: could not request RAM window\n");
388 n2_destroy_card(card);
389 return -EBUSY;
390 }
391 card->phy_winbase = winbase;
392 card->winbase = ioremap(winbase, USE_WINDOWSIZE);
393 if (!card->winbase) {
394 printk(KERN_ERR "n2: ioremap() failed\n");
395 n2_destroy_card(card);
396 return -EFAULT;
397 }
398
399 outb(0, io + N2_PCR);
400 outb(winbase >> 12, io + N2_BAR);
401
402 switch (USE_WINDOWSIZE) {
403 case 16384:
404 outb(WIN16K, io + N2_PSR);
405 break;
406
407 case 32768:
408 outb(WIN32K, io + N2_PSR);
409 break;
410
411 case 65536:
412 outb(WIN64K, io + N2_PSR);
413 break;
414
415 default:
416 printk(KERN_ERR "n2: invalid window size\n");
417 n2_destroy_card(card);
418 return -ENODEV;
419 }
420
421 pcr = PCR_ENWIN | PCR_VPM | (USE_BUS16BITS ? PCR_BUS16 : 0);
422 outb(pcr, io + N2_PCR);
423
424 card->ram_size = sca_detect_ram(card, card->winbase, MAX_RAM_SIZE);
425
426 /* number of TX + RX buffers for one port */
427 i = card->ram_size / ((valid0 + valid1) * (sizeof(pkt_desc) +
428 HDLC_MAX_MRU));
429
430 card->tx_ring_buffers = min(i / 2, MAX_TX_BUFFERS);
431 card->rx_ring_buffers = i - card->tx_ring_buffers;
432
433 card->buff_offset = (valid0 + valid1) * sizeof(pkt_desc) *
434 (card->tx_ring_buffers + card->rx_ring_buffers);
435
436 printk(KERN_INFO "n2: RISCom/N2 %u KB RAM, IRQ%u, "
437 "using %u TX + %u RX packets rings\n", card->ram_size / 1024,
438 card->irq, card->tx_ring_buffers, card->rx_ring_buffers);
439
440 if (card->tx_ring_buffers < 1) {
441 printk(KERN_ERR "n2: RAM test failed\n");
442 n2_destroy_card(card);
443 return -EIO;
444 }
445
446 pcr |= PCR_RUNSCA; /* run SCA */
447 outb(pcr, io + N2_PCR);
448 outb(0, io + N2_MCR);
449
450 sca_init(card, 0);
451 for (cnt = 0; cnt < 2; cnt++) {
452 port_t *port = &card->ports[cnt];
453 struct net_device *dev = port_to_dev(port);
454 hdlc_device *hdlc = dev_to_hdlc(dev);
455
456 if ((cnt == 0 && !valid0) || (cnt == 1 && !valid1))
457 continue;
458
459 port->phy_node = cnt;
460 port->valid = 1;
461
462 if ((cnt == 1) && valid0)
463 port->log_node = 1;
464
465 spin_lock_init(&port->lock);
466 dev->irq = irq;
467 dev->mem_start = winbase;
468 dev->mem_end = winbase + USE_WINDOWSIZE - 1;
469 dev->tx_queue_len = 50;
470 dev->netdev_ops = &n2_ops;
471 hdlc->attach = sca_attach;
472 hdlc->xmit = sca_xmit;
473 port->settings.clock_type = CLOCK_EXT;
474 port->card = card;
475
476 if (register_hdlc_device(dev)) {
477 printk(KERN_WARNING "n2: unable to register hdlc "
478 "device\n");
479 port->card = NULL;
480 n2_destroy_card(card);
481 return -ENOBUFS;
482 }
483 sca_init_port(port); /* Set up SCA memory */
484
485 printk(KERN_INFO "%s: RISCom/N2 node %d\n",
486 dev->name, port->phy_node);
487 }
488
489 *new_card = card;
490 new_card = &card->next_card;
491
492 return 0;
493 }
494
495
496
497 static int __init n2_init(void)
498 {
499 if (hw==NULL) {
500 #ifdef MODULE
501 printk(KERN_INFO "n2: no card initialized\n");
502 #endif
503 return -EINVAL; /* no parameters specified, abort */
504 }
505
506 printk(KERN_INFO "%s\n", version);
507
508 do {
509 unsigned long io, irq, ram;
510 long valid[2] = { 0, 0 }; /* Default = both ports disabled */
511
512 io = simple_strtoul(hw, &hw, 0);
513
514 if (*hw++ != ',')
515 break;
516 irq = simple_strtoul(hw, &hw, 0);
517
518 if (*hw++ != ',')
519 break;
520 ram = simple_strtoul(hw, &hw, 0);
521
522 if (*hw++ != ',')
523 break;
524 while(1) {
525 if (*hw == '0' && !valid[0])
526 valid[0] = 1; /* Port 0 enabled */
527 else if (*hw == '1' && !valid[1])
528 valid[1] = 1; /* Port 1 enabled */
529 else
530 break;
531 hw++;
532 }
533
534 if (!valid[0] && !valid[1])
535 break; /* at least one port must be used */
536
537 if (*hw == ':' || *hw == '\x0')
538 n2_run(io, irq, ram, valid[0], valid[1]);
539
540 if (*hw == '\x0')
541 return first_card ? 0 : -EINVAL;
542 }while(*hw++ == ':');
543
544 printk(KERN_ERR "n2: invalid hardware parameters\n");
545 return first_card ? 0 : -EINVAL;
546 }
547
548
549 static void __exit n2_cleanup(void)
550 {
551 card_t *card = first_card;
552
553 while (card) {
554 card_t *ptr = card;
555 card = card->next_card;
556 n2_destroy_card(ptr);
557 }
558 }
559
560
561 module_init(n2_init);
562 module_exit(n2_cleanup);
563
564 MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
565 MODULE_DESCRIPTION("RISCom/N2 serial port driver");
566 MODULE_LICENSE("GPL v2");
567 module_param(hw, charp, 0444);
568 MODULE_PARM_DESC(hw, "io,irq,ram,ports:io,irq,...");
linux-next