proc: use seq_puts()/seq_putc() where possible
[linux-2.6/next.git] / drivers / net / wan / x25_asy.c
blob24297b274cd475ac855114394784c7eeaab2bcd0
1 /*
2 * Things to sort out:
4 * o tbusy handling
5 * o allow users to set the parameters
6 * o sync/async switching ?
8 * Note: This does _not_ implement CCITT X.25 asynchronous framing
9 * recommendations. Its primarily for testing purposes. If you wanted
10 * to do CCITT then in theory all you need is to nick the HDLC async
11 * checksum routines from ppp.c
12 * Changes:
14 * 2000-10-29 Henner Eisen lapb_data_indication() return status.
17 #include <linux/module.h>
19 #include <asm/system.h>
20 #include <linux/uaccess.h>
21 #include <linux/bitops.h>
22 #include <linux/string.h>
23 #include <linux/mm.h>
24 #include <linux/interrupt.h>
25 #include <linux/in.h>
26 #include <linux/tty.h>
27 #include <linux/errno.h>
28 #include <linux/netdevice.h>
29 #include <linux/etherdevice.h>
30 #include <linux/skbuff.h>
31 #include <linux/if_arp.h>
32 #include <linux/lapb.h>
33 #include <linux/init.h>
34 #include <linux/rtnetlink.h>
35 #include <linux/compat.h>
36 #include <linux/slab.h>
37 #include <net/x25device.h>
38 #include "x25_asy.h"
40 static struct net_device **x25_asy_devs;
41 static int x25_asy_maxdev = SL_NRUNIT;
43 module_param(x25_asy_maxdev, int, 0);
44 MODULE_LICENSE("GPL");
46 static int x25_asy_esc(unsigned char *p, unsigned char *d, int len);
47 static void x25_asy_unesc(struct x25_asy *sl, unsigned char c);
48 static void x25_asy_setup(struct net_device *dev);
50 /* Find a free X.25 channel, and link in this `tty' line. */
51 static struct x25_asy *x25_asy_alloc(void)
53 struct net_device *dev = NULL;
54 struct x25_asy *sl;
55 int i;
57 if (x25_asy_devs == NULL)
58 return NULL; /* Master array missing ! */
60 for (i = 0; i < x25_asy_maxdev; i++) {
61 dev = x25_asy_devs[i];
63 /* Not allocated ? */
64 if (dev == NULL)
65 break;
67 sl = netdev_priv(dev);
68 /* Not in use ? */
69 if (!test_and_set_bit(SLF_INUSE, &sl->flags))
70 return sl;
74 /* Sorry, too many, all slots in use */
75 if (i >= x25_asy_maxdev)
76 return NULL;
78 /* If no channels are available, allocate one */
79 if (!dev) {
80 char name[IFNAMSIZ];
81 sprintf(name, "x25asy%d", i);
83 dev = alloc_netdev(sizeof(struct x25_asy),
84 name, x25_asy_setup);
85 if (!dev)
86 return NULL;
88 /* Initialize channel control data */
89 sl = netdev_priv(dev);
90 dev->base_addr = i;
92 /* register device so that it can be ifconfig'ed */
93 if (register_netdev(dev) == 0) {
94 /* (Re-)Set the INUSE bit. Very Important! */
95 set_bit(SLF_INUSE, &sl->flags);
96 x25_asy_devs[i] = dev;
97 return sl;
98 } else {
99 printk(KERN_WARNING "x25_asy_alloc() - register_netdev() failure.\n");
100 free_netdev(dev);
103 return NULL;
107 /* Free an X.25 channel. */
108 static void x25_asy_free(struct x25_asy *sl)
110 /* Free all X.25 frame buffers. */
111 kfree(sl->rbuff);
112 sl->rbuff = NULL;
113 kfree(sl->xbuff);
114 sl->xbuff = NULL;
116 if (!test_and_clear_bit(SLF_INUSE, &sl->flags))
117 printk(KERN_ERR "%s: x25_asy_free for already free unit.\n",
118 sl->dev->name);
121 static int x25_asy_change_mtu(struct net_device *dev, int newmtu)
123 struct x25_asy *sl = netdev_priv(dev);
124 unsigned char *xbuff, *rbuff;
125 int len = 2 * newmtu;
127 xbuff = kmalloc(len + 4, GFP_ATOMIC);
128 rbuff = kmalloc(len + 4, GFP_ATOMIC);
130 if (xbuff == NULL || rbuff == NULL) {
131 printk(KERN_WARNING "%s: unable to grow X.25 buffers, MTU change cancelled.\n",
132 dev->name);
133 kfree(xbuff);
134 kfree(rbuff);
135 return -ENOMEM;
138 spin_lock_bh(&sl->lock);
139 xbuff = xchg(&sl->xbuff, xbuff);
140 if (sl->xleft) {
141 if (sl->xleft <= len) {
142 memcpy(sl->xbuff, sl->xhead, sl->xleft);
143 } else {
144 sl->xleft = 0;
145 dev->stats.tx_dropped++;
148 sl->xhead = sl->xbuff;
150 rbuff = xchg(&sl->rbuff, rbuff);
151 if (sl->rcount) {
152 if (sl->rcount <= len) {
153 memcpy(sl->rbuff, rbuff, sl->rcount);
154 } else {
155 sl->rcount = 0;
156 dev->stats.rx_over_errors++;
157 set_bit(SLF_ERROR, &sl->flags);
161 dev->mtu = newmtu;
162 sl->buffsize = len;
164 spin_unlock_bh(&sl->lock);
166 kfree(xbuff);
167 kfree(rbuff);
168 return 0;
172 /* Set the "sending" flag. This must be atomic, hence the ASM. */
174 static inline void x25_asy_lock(struct x25_asy *sl)
176 netif_stop_queue(sl->dev);
180 /* Clear the "sending" flag. This must be atomic, hence the ASM. */
182 static inline void x25_asy_unlock(struct x25_asy *sl)
184 netif_wake_queue(sl->dev);
187 /* Send one completely decapsulated IP datagram to the IP layer. */
189 static void x25_asy_bump(struct x25_asy *sl)
191 struct net_device *dev = sl->dev;
192 struct sk_buff *skb;
193 int count;
194 int err;
196 count = sl->rcount;
197 dev->stats.rx_bytes += count;
199 skb = dev_alloc_skb(count+1);
200 if (skb == NULL) {
201 printk(KERN_WARNING "%s: memory squeeze, dropping packet.\n",
202 sl->dev->name);
203 dev->stats.rx_dropped++;
204 return;
206 skb_push(skb, 1); /* LAPB internal control */
207 memcpy(skb_put(skb, count), sl->rbuff, count);
208 skb->protocol = x25_type_trans(skb, sl->dev);
209 err = lapb_data_received(skb->dev, skb);
210 if (err != LAPB_OK) {
211 kfree_skb(skb);
212 printk(KERN_DEBUG "x25_asy: data received err - %d\n", err);
213 } else {
214 netif_rx(skb);
215 dev->stats.rx_packets++;
219 /* Encapsulate one IP datagram and stuff into a TTY queue. */
220 static void x25_asy_encaps(struct x25_asy *sl, unsigned char *icp, int len)
222 unsigned char *p;
223 int actual, count, mtu = sl->dev->mtu;
225 if (len > mtu) {
226 /* Sigh, shouldn't occur BUT ... */
227 len = mtu;
228 printk(KERN_DEBUG "%s: truncating oversized transmit packet!\n",
229 sl->dev->name);
230 sl->dev->stats.tx_dropped++;
231 x25_asy_unlock(sl);
232 return;
235 p = icp;
236 count = x25_asy_esc(p, (unsigned char *) sl->xbuff, len);
238 /* Order of next two lines is *very* important.
239 * When we are sending a little amount of data,
240 * the transfer may be completed inside driver.write()
241 * routine, because it's running with interrupts enabled.
242 * In this case we *never* got WRITE_WAKEUP event,
243 * if we did not request it before write operation.
244 * 14 Oct 1994 Dmitry Gorodchanin.
246 set_bit(TTY_DO_WRITE_WAKEUP, &sl->tty->flags);
247 actual = sl->tty->ops->write(sl->tty, sl->xbuff, count);
248 sl->xleft = count - actual;
249 sl->xhead = sl->xbuff + actual;
250 /* VSV */
251 clear_bit(SLF_OUTWAIT, &sl->flags); /* reset outfill flag */
255 * Called by the driver when there's room for more data. If we have
256 * more packets to send, we send them here.
258 static void x25_asy_write_wakeup(struct tty_struct *tty)
260 int actual;
261 struct x25_asy *sl = tty->disc_data;
263 /* First make sure we're connected. */
264 if (!sl || sl->magic != X25_ASY_MAGIC || !netif_running(sl->dev))
265 return;
267 if (sl->xleft <= 0) {
268 /* Now serial buffer is almost free & we can start
269 * transmission of another packet */
270 sl->dev->stats.tx_packets++;
271 clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
272 x25_asy_unlock(sl);
273 return;
276 actual = tty->ops->write(tty, sl->xhead, sl->xleft);
277 sl->xleft -= actual;
278 sl->xhead += actual;
281 static void x25_asy_timeout(struct net_device *dev)
283 struct x25_asy *sl = netdev_priv(dev);
285 spin_lock(&sl->lock);
286 if (netif_queue_stopped(dev)) {
287 /* May be we must check transmitter timeout here ?
288 * 14 Oct 1994 Dmitry Gorodchanin.
290 printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name,
291 (tty_chars_in_buffer(sl->tty) || sl->xleft) ?
292 "bad line quality" : "driver error");
293 sl->xleft = 0;
294 clear_bit(TTY_DO_WRITE_WAKEUP, &sl->tty->flags);
295 x25_asy_unlock(sl);
297 spin_unlock(&sl->lock);
300 /* Encapsulate an IP datagram and kick it into a TTY queue. */
302 static netdev_tx_t x25_asy_xmit(struct sk_buff *skb,
303 struct net_device *dev)
305 struct x25_asy *sl = netdev_priv(dev);
306 int err;
308 if (!netif_running(sl->dev)) {
309 printk(KERN_ERR "%s: xmit call when iface is down\n",
310 dev->name);
311 kfree_skb(skb);
312 return NETDEV_TX_OK;
315 switch (skb->data[0]) {
316 case X25_IFACE_DATA:
317 break;
318 case X25_IFACE_CONNECT: /* Connection request .. do nothing */
319 err = lapb_connect_request(dev);
320 if (err != LAPB_OK)
321 printk(KERN_ERR "x25_asy: lapb_connect_request error - %d\n", err);
322 kfree_skb(skb);
323 return NETDEV_TX_OK;
324 case X25_IFACE_DISCONNECT: /* do nothing - hang up ?? */
325 err = lapb_disconnect_request(dev);
326 if (err != LAPB_OK)
327 printk(KERN_ERR "x25_asy: lapb_disconnect_request error - %d\n", err);
328 default:
329 kfree_skb(skb);
330 return NETDEV_TX_OK;
332 skb_pull(skb, 1); /* Remove control byte */
334 * If we are busy already- too bad. We ought to be able
335 * to queue things at this point, to allow for a little
336 * frame buffer. Oh well...
337 * -----------------------------------------------------
338 * I hate queues in X.25 driver. May be it's efficient,
339 * but for me latency is more important. ;)
340 * So, no queues !
341 * 14 Oct 1994 Dmitry Gorodchanin.
344 err = lapb_data_request(dev, skb);
345 if (err != LAPB_OK) {
346 printk(KERN_ERR "x25_asy: lapb_data_request error - %d\n", err);
347 kfree_skb(skb);
348 return NETDEV_TX_OK;
350 return NETDEV_TX_OK;
355 * LAPB interface boilerplate
359 * Called when I frame data arrives. We did the work above - throw it
360 * at the net layer.
363 static int x25_asy_data_indication(struct net_device *dev, struct sk_buff *skb)
365 return netif_rx(skb);
369 * Data has emerged from the LAPB protocol machine. We don't handle
370 * busy cases too well. Its tricky to see how to do this nicely -
371 * perhaps lapb should allow us to bounce this ?
374 static void x25_asy_data_transmit(struct net_device *dev, struct sk_buff *skb)
376 struct x25_asy *sl = netdev_priv(dev);
378 spin_lock(&sl->lock);
379 if (netif_queue_stopped(sl->dev) || sl->tty == NULL) {
380 spin_unlock(&sl->lock);
381 printk(KERN_ERR "x25_asy: tbusy drop\n");
382 kfree_skb(skb);
383 return;
385 /* We were not busy, so we are now... :-) */
386 if (skb != NULL) {
387 x25_asy_lock(sl);
388 dev->stats.tx_bytes += skb->len;
389 x25_asy_encaps(sl, skb->data, skb->len);
390 dev_kfree_skb(skb);
392 spin_unlock(&sl->lock);
396 * LAPB connection establish/down information.
399 static void x25_asy_connected(struct net_device *dev, int reason)
401 struct x25_asy *sl = netdev_priv(dev);
402 struct sk_buff *skb;
403 unsigned char *ptr;
405 skb = dev_alloc_skb(1);
406 if (skb == NULL) {
407 printk(KERN_ERR "x25_asy: out of memory\n");
408 return;
411 ptr = skb_put(skb, 1);
412 *ptr = X25_IFACE_CONNECT;
414 skb->protocol = x25_type_trans(skb, sl->dev);
415 netif_rx(skb);
418 static void x25_asy_disconnected(struct net_device *dev, int reason)
420 struct x25_asy *sl = netdev_priv(dev);
421 struct sk_buff *skb;
422 unsigned char *ptr;
424 skb = dev_alloc_skb(1);
425 if (skb == NULL) {
426 printk(KERN_ERR "x25_asy: out of memory\n");
427 return;
430 ptr = skb_put(skb, 1);
431 *ptr = X25_IFACE_DISCONNECT;
433 skb->protocol = x25_type_trans(skb, sl->dev);
434 netif_rx(skb);
437 static struct lapb_register_struct x25_asy_callbacks = {
438 .connect_confirmation = x25_asy_connected,
439 .connect_indication = x25_asy_connected,
440 .disconnect_confirmation = x25_asy_disconnected,
441 .disconnect_indication = x25_asy_disconnected,
442 .data_indication = x25_asy_data_indication,
443 .data_transmit = x25_asy_data_transmit,
448 /* Open the low-level part of the X.25 channel. Easy! */
449 static int x25_asy_open(struct net_device *dev)
451 struct x25_asy *sl = netdev_priv(dev);
452 unsigned long len;
453 int err;
455 if (sl->tty == NULL)
456 return -ENODEV;
459 * Allocate the X.25 frame buffers:
461 * rbuff Receive buffer.
462 * xbuff Transmit buffer.
465 len = dev->mtu * 2;
467 sl->rbuff = kmalloc(len + 4, GFP_KERNEL);
468 if (sl->rbuff == NULL)
469 goto norbuff;
470 sl->xbuff = kmalloc(len + 4, GFP_KERNEL);
471 if (sl->xbuff == NULL)
472 goto noxbuff;
474 sl->buffsize = len;
475 sl->rcount = 0;
476 sl->xleft = 0;
477 sl->flags &= (1 << SLF_INUSE); /* Clear ESCAPE & ERROR flags */
479 netif_start_queue(dev);
482 * Now attach LAPB
484 err = lapb_register(dev, &x25_asy_callbacks);
485 if (err == LAPB_OK)
486 return 0;
488 /* Cleanup */
489 kfree(sl->xbuff);
490 noxbuff:
491 kfree(sl->rbuff);
492 norbuff:
493 return -ENOMEM;
497 /* Close the low-level part of the X.25 channel. Easy! */
498 static int x25_asy_close(struct net_device *dev)
500 struct x25_asy *sl = netdev_priv(dev);
502 spin_lock(&sl->lock);
503 if (sl->tty)
504 clear_bit(TTY_DO_WRITE_WAKEUP, &sl->tty->flags);
506 netif_stop_queue(dev);
507 sl->rcount = 0;
508 sl->xleft = 0;
509 spin_unlock(&sl->lock);
510 return 0;
514 * Handle the 'receiver data ready' interrupt.
515 * This function is called by the 'tty_io' module in the kernel when
516 * a block of X.25 data has been received, which can now be decapsulated
517 * and sent on to some IP layer for further processing.
520 static void x25_asy_receive_buf(struct tty_struct *tty,
521 const unsigned char *cp, char *fp, int count)
523 struct x25_asy *sl = tty->disc_data;
525 if (!sl || sl->magic != X25_ASY_MAGIC || !netif_running(sl->dev))
526 return;
529 /* Read the characters out of the buffer */
530 while (count--) {
531 if (fp && *fp++) {
532 if (!test_and_set_bit(SLF_ERROR, &sl->flags))
533 sl->dev->stats.rx_errors++;
534 cp++;
535 continue;
537 x25_asy_unesc(sl, *cp++);
542 * Open the high-level part of the X.25 channel.
543 * This function is called by the TTY module when the
544 * X.25 line discipline is called for. Because we are
545 * sure the tty line exists, we only have to link it to
546 * a free X.25 channel...
549 static int x25_asy_open_tty(struct tty_struct *tty)
551 struct x25_asy *sl = tty->disc_data;
552 int err;
554 if (tty->ops->write == NULL)
555 return -EOPNOTSUPP;
557 /* First make sure we're not already connected. */
558 if (sl && sl->magic == X25_ASY_MAGIC)
559 return -EEXIST;
561 /* OK. Find a free X.25 channel to use. */
562 sl = x25_asy_alloc();
563 if (sl == NULL)
564 return -ENFILE;
566 sl->tty = tty;
567 tty->disc_data = sl;
568 tty->receive_room = 65536;
569 tty_driver_flush_buffer(tty);
570 tty_ldisc_flush(tty);
572 /* Restore default settings */
573 sl->dev->type = ARPHRD_X25;
575 /* Perform the low-level X.25 async init */
576 err = x25_asy_open(sl->dev);
577 if (err)
578 return err;
579 /* Done. We have linked the TTY line to a channel. */
580 return 0;
585 * Close down an X.25 channel.
586 * This means flushing out any pending queues, and then restoring the
587 * TTY line discipline to what it was before it got hooked to X.25
588 * (which usually is TTY again).
590 static void x25_asy_close_tty(struct tty_struct *tty)
592 struct x25_asy *sl = tty->disc_data;
593 int err;
595 /* First make sure we're connected. */
596 if (!sl || sl->magic != X25_ASY_MAGIC)
597 return;
599 rtnl_lock();
600 if (sl->dev->flags & IFF_UP)
601 dev_close(sl->dev);
602 rtnl_unlock();
604 err = lapb_unregister(sl->dev);
605 if (err != LAPB_OK)
606 printk(KERN_ERR "x25_asy_close: lapb_unregister error -%d\n",
607 err);
609 tty->disc_data = NULL;
610 sl->tty = NULL;
611 x25_asy_free(sl);
614 /************************************************************************
615 * STANDARD X.25 ENCAPSULATION *
616 ************************************************************************/
618 static int x25_asy_esc(unsigned char *s, unsigned char *d, int len)
620 unsigned char *ptr = d;
621 unsigned char c;
624 * Send an initial END character to flush out any
625 * data that may have accumulated in the receiver
626 * due to line noise.
629 *ptr++ = X25_END; /* Send 10111110 bit seq */
632 * For each byte in the packet, send the appropriate
633 * character sequence, according to the X.25 protocol.
636 while (len-- > 0) {
637 switch (c = *s++) {
638 case X25_END:
639 *ptr++ = X25_ESC;
640 *ptr++ = X25_ESCAPE(X25_END);
641 break;
642 case X25_ESC:
643 *ptr++ = X25_ESC;
644 *ptr++ = X25_ESCAPE(X25_ESC);
645 break;
646 default:
647 *ptr++ = c;
648 break;
651 *ptr++ = X25_END;
652 return ptr - d;
655 static void x25_asy_unesc(struct x25_asy *sl, unsigned char s)
658 switch (s) {
659 case X25_END:
660 if (!test_and_clear_bit(SLF_ERROR, &sl->flags) &&
661 sl->rcount > 2)
662 x25_asy_bump(sl);
663 clear_bit(SLF_ESCAPE, &sl->flags);
664 sl->rcount = 0;
665 return;
666 case X25_ESC:
667 set_bit(SLF_ESCAPE, &sl->flags);
668 return;
669 case X25_ESCAPE(X25_ESC):
670 case X25_ESCAPE(X25_END):
671 if (test_and_clear_bit(SLF_ESCAPE, &sl->flags))
672 s = X25_UNESCAPE(s);
673 break;
675 if (!test_bit(SLF_ERROR, &sl->flags)) {
676 if (sl->rcount < sl->buffsize) {
677 sl->rbuff[sl->rcount++] = s;
678 return;
680 sl->dev->stats.rx_over_errors++;
681 set_bit(SLF_ERROR, &sl->flags);
686 /* Perform I/O control on an active X.25 channel. */
687 static int x25_asy_ioctl(struct tty_struct *tty, struct file *file,
688 unsigned int cmd, unsigned long arg)
690 struct x25_asy *sl = tty->disc_data;
692 /* First make sure we're connected. */
693 if (!sl || sl->magic != X25_ASY_MAGIC)
694 return -EINVAL;
696 switch (cmd) {
697 case SIOCGIFNAME:
698 if (copy_to_user((void __user *)arg, sl->dev->name,
699 strlen(sl->dev->name) + 1))
700 return -EFAULT;
701 return 0;
702 case SIOCSIFHWADDR:
703 return -EINVAL;
704 default:
705 return tty_mode_ioctl(tty, file, cmd, arg);
709 #ifdef CONFIG_COMPAT
710 static long x25_asy_compat_ioctl(struct tty_struct *tty, struct file *file,
711 unsigned int cmd, unsigned long arg)
713 switch (cmd) {
714 case SIOCGIFNAME:
715 case SIOCSIFHWADDR:
716 return x25_asy_ioctl(tty, file, cmd,
717 (unsigned long)compat_ptr(arg));
720 return -ENOIOCTLCMD;
722 #endif
724 static int x25_asy_open_dev(struct net_device *dev)
726 struct x25_asy *sl = netdev_priv(dev);
727 if (sl->tty == NULL)
728 return -ENODEV;
729 return 0;
732 static const struct net_device_ops x25_asy_netdev_ops = {
733 .ndo_open = x25_asy_open_dev,
734 .ndo_stop = x25_asy_close,
735 .ndo_start_xmit = x25_asy_xmit,
736 .ndo_tx_timeout = x25_asy_timeout,
737 .ndo_change_mtu = x25_asy_change_mtu,
740 /* Initialise the X.25 driver. Called by the device init code */
741 static void x25_asy_setup(struct net_device *dev)
743 struct x25_asy *sl = netdev_priv(dev);
745 sl->magic = X25_ASY_MAGIC;
746 sl->dev = dev;
747 spin_lock_init(&sl->lock);
748 set_bit(SLF_INUSE, &sl->flags);
751 * Finish setting up the DEVICE info.
754 dev->mtu = SL_MTU;
755 dev->netdev_ops = &x25_asy_netdev_ops;
756 dev->watchdog_timeo = HZ*20;
757 dev->hard_header_len = 0;
758 dev->addr_len = 0;
759 dev->type = ARPHRD_X25;
760 dev->tx_queue_len = 10;
762 /* New-style flags. */
763 dev->flags = IFF_NOARP;
766 static struct tty_ldisc_ops x25_ldisc = {
767 .owner = THIS_MODULE,
768 .magic = TTY_LDISC_MAGIC,
769 .name = "X.25",
770 .open = x25_asy_open_tty,
771 .close = x25_asy_close_tty,
772 .ioctl = x25_asy_ioctl,
773 #ifdef CONFIG_COMPAT
774 .compat_ioctl = x25_asy_compat_ioctl,
775 #endif
776 .receive_buf = x25_asy_receive_buf,
777 .write_wakeup = x25_asy_write_wakeup,
780 static int __init init_x25_asy(void)
782 if (x25_asy_maxdev < 4)
783 x25_asy_maxdev = 4; /* Sanity */
785 printk(KERN_INFO "X.25 async: version 0.00 ALPHA "
786 "(dynamic channels, max=%d).\n", x25_asy_maxdev);
788 x25_asy_devs = kcalloc(x25_asy_maxdev, sizeof(struct net_device *),
789 GFP_KERNEL);
790 if (!x25_asy_devs) {
791 printk(KERN_WARNING "X25 async: Can't allocate x25_asy_ctrls[] "
792 "array! Uaargh! (-> No X.25 available)\n");
793 return -ENOMEM;
796 return tty_register_ldisc(N_X25, &x25_ldisc);
800 static void __exit exit_x25_asy(void)
802 struct net_device *dev;
803 int i;
805 for (i = 0; i < x25_asy_maxdev; i++) {
806 dev = x25_asy_devs[i];
807 if (dev) {
808 struct x25_asy *sl = netdev_priv(dev);
810 spin_lock_bh(&sl->lock);
811 if (sl->tty)
812 tty_hangup(sl->tty);
814 spin_unlock_bh(&sl->lock);
816 * VSV = if dev->start==0, then device
817 * unregistered while close proc.
819 unregister_netdev(dev);
820 free_netdev(dev);
824 kfree(x25_asy_devs);
825 tty_unregister_ldisc(N_X25);
828 module_init(init_x25_asy);
829 module_exit(exit_x25_asy);