proc: use seq_puts()/seq_putc() where possible
[linux-2.6/next.git] / drivers / net / wireless / ath / ath5k / caps.c
blob31cad80e9b01f84c17e536371ce25f6887ca74e4
1 /*
2 * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
3 * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
4 * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
6 * Permission to use, copy, modify, and distribute this software for any
7 * purpose with or without fee is hereby granted, provided that the above
8 * copyright notice and this permission notice appear in all copies.
10 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
11 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
12 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
13 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
14 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
15 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
16 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
20 /**************\
21 * Capabilities *
22 \**************/
24 #include "ath5k.h"
25 #include "reg.h"
26 #include "debug.h"
27 #include "base.h"
30 * Fill the capabilities struct
31 * TODO: Merge this with EEPROM code when we are done with it
33 int ath5k_hw_set_capabilities(struct ath5k_hw *ah)
35 u16 ee_header;
37 /* Capabilities stored in the EEPROM */
38 ee_header = ah->ah_capabilities.cap_eeprom.ee_header;
40 if (ah->ah_version == AR5K_AR5210) {
42 * Set radio capabilities
43 * (The AR5110 only supports the middle 5GHz band)
45 ah->ah_capabilities.cap_range.range_5ghz_min = 5120;
46 ah->ah_capabilities.cap_range.range_5ghz_max = 5430;
47 ah->ah_capabilities.cap_range.range_2ghz_min = 0;
48 ah->ah_capabilities.cap_range.range_2ghz_max = 0;
50 /* Set supported modes */
51 __set_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode);
52 } else {
54 * XXX The tranceiver supports frequencies from 4920 to 6100GHz
55 * XXX and from 2312 to 2732GHz. There are problems with the
56 * XXX current ieee80211 implementation because the IEEE
57 * XXX channel mapping does not support negative channel
58 * XXX numbers (2312MHz is channel -19). Of course, this
59 * XXX doesn't matter because these channels are out of range
60 * XXX but some regulation domains like MKK (Japan) will
61 * XXX support frequencies somewhere around 4.8GHz.
65 * Set radio capabilities
68 if (AR5K_EEPROM_HDR_11A(ee_header)) {
69 /* 4920 */
70 ah->ah_capabilities.cap_range.range_5ghz_min = 5005;
71 ah->ah_capabilities.cap_range.range_5ghz_max = 6100;
73 /* Set supported modes */
74 __set_bit(AR5K_MODE_11A,
75 ah->ah_capabilities.cap_mode);
78 /* Enable 802.11b if a 2GHz capable radio (2111/5112) is
79 * connected */
80 if (AR5K_EEPROM_HDR_11B(ee_header) ||
81 (AR5K_EEPROM_HDR_11G(ee_header) &&
82 ah->ah_version != AR5K_AR5211)) {
83 /* 2312 */
84 ah->ah_capabilities.cap_range.range_2ghz_min = 2412;
85 ah->ah_capabilities.cap_range.range_2ghz_max = 2732;
87 if (AR5K_EEPROM_HDR_11B(ee_header))
88 __set_bit(AR5K_MODE_11B,
89 ah->ah_capabilities.cap_mode);
91 if (AR5K_EEPROM_HDR_11G(ee_header) &&
92 ah->ah_version != AR5K_AR5211)
93 __set_bit(AR5K_MODE_11G,
94 ah->ah_capabilities.cap_mode);
98 /* Set number of supported TX queues */
99 if (ah->ah_version == AR5K_AR5210)
100 ah->ah_capabilities.cap_queues.q_tx_num =
101 AR5K_NUM_TX_QUEUES_NOQCU;
102 else
103 ah->ah_capabilities.cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES;
105 /* newer hardware has PHY error counters */
106 if (ah->ah_mac_srev >= AR5K_SREV_AR5213A)
107 ah->ah_capabilities.cap_has_phyerr_counters = true;
108 else
109 ah->ah_capabilities.cap_has_phyerr_counters = false;
111 return 0;
114 /* Main function used by the driver part to check caps */
115 int ath5k_hw_get_capability(struct ath5k_hw *ah,
116 enum ath5k_capability_type cap_type,
117 u32 capability, u32 *result)
119 switch (cap_type) {
120 case AR5K_CAP_NUM_TXQUEUES:
121 if (result) {
122 if (ah->ah_version == AR5K_AR5210)
123 *result = AR5K_NUM_TX_QUEUES_NOQCU;
124 else
125 *result = AR5K_NUM_TX_QUEUES;
126 goto yes;
128 case AR5K_CAP_VEOL:
129 goto yes;
130 case AR5K_CAP_COMPRESSION:
131 if (ah->ah_version == AR5K_AR5212)
132 goto yes;
133 else
134 goto no;
135 case AR5K_CAP_BURST:
136 goto yes;
137 case AR5K_CAP_TPC:
138 goto yes;
139 case AR5K_CAP_BSSIDMASK:
140 if (ah->ah_version == AR5K_AR5212)
141 goto yes;
142 else
143 goto no;
144 case AR5K_CAP_XR:
145 if (ah->ah_version == AR5K_AR5212)
146 goto yes;
147 else
148 goto no;
149 default:
150 goto no;
154 return -EINVAL;
155 yes:
156 return 0;
160 * TODO: Following functions should be part of a new function
161 * set_capability
164 int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid,
165 u16 assoc_id)
167 if (ah->ah_version == AR5K_AR5210) {
168 AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
169 AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA);
170 return 0;
173 return -EIO;
176 int ath5k_hw_disable_pspoll(struct ath5k_hw *ah)
178 if (ah->ah_version == AR5K_AR5210) {
179 AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1,
180 AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA);
181 return 0;
184 return -EIO;