1 /******************************************************************************
3 Copyright(c) 2003 - 2006 Intel Corporation. All rights reserved.
5 This program is free software; you can redistribute it and/or modify it
6 under the terms of version 2 of the GNU General Public License as
7 published by the Free Software Foundation.
9 This program is distributed in the hope that it will be useful, but WITHOUT
10 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 You should have received a copy of the GNU General Public License along with
15 this program; if not, write to the Free Software Foundation, Inc., 59
16 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
18 The full GNU General Public License is included in this distribution in the
22 Intel Linux Wireless <ilw@linux.intel.com>
23 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 Portions of this file are based on the sample_* files provided by Wireless
26 Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes
29 Portions of this file are based on the Host AP project,
30 Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
32 Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi>
34 Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and
35 ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c
36 available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox
38 ******************************************************************************/
41 Initial driver on which this is based was developed by Janusz Gorycki,
42 Maciej Urbaniak, and Maciej Sosnowski.
44 Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak.
48 Tx - Commands and Data
50 Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs)
51 Each TBD contains a pointer to the physical (dma_addr_t) address of data being
52 sent to the firmware as well as the length of the data.
54 The host writes to the TBD queue at the WRITE index. The WRITE index points
55 to the _next_ packet to be written and is advanced when after the TBD has been
58 The firmware pulls from the TBD queue at the READ index. The READ index points
59 to the currently being read entry, and is advanced once the firmware is
62 When data is sent to the firmware, the first TBD is used to indicate to the
63 firmware if a Command or Data is being sent. If it is Command, all of the
64 command information is contained within the physical address referred to by the
65 TBD. If it is Data, the first TBD indicates the type of data packet, number
66 of fragments, etc. The next TBD then referrs to the actual packet location.
68 The Tx flow cycle is as follows:
70 1) ipw2100_tx() is called by kernel with SKB to transmit
71 2) Packet is move from the tx_free_list and appended to the transmit pending
73 3) work is scheduled to move pending packets into the shared circular queue.
74 4) when placing packet in the circular queue, the incoming SKB is DMA mapped
75 to a physical address. That address is entered into a TBD. Two TBDs are
76 filled out. The first indicating a data packet, the second referring to the
78 5) the packet is removed from tx_pend_list and placed on the end of the
79 firmware pending list (fw_pend_list)
80 6) firmware is notified that the WRITE index has
81 7) Once the firmware has processed the TBD, INTA is triggered.
82 8) For each Tx interrupt received from the firmware, the READ index is checked
83 to see which TBDs are done being processed.
84 9) For each TBD that has been processed, the ISR pulls the oldest packet
85 from the fw_pend_list.
86 10)The packet structure contained in the fw_pend_list is then used
87 to unmap the DMA address and to free the SKB originally passed to the driver
89 11)The packet structure is placed onto the tx_free_list
91 The above steps are the same for commands, only the msg_free_list/msg_pend_list
92 are used instead of tx_free_list/tx_pend_list
96 Critical Sections / Locking :
98 There are two locks utilized. The first is the low level lock (priv->low_lock)
99 that protects the following:
101 - Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows:
103 tx_free_list : Holds pre-allocated Tx buffers.
104 TAIL modified in __ipw2100_tx_process()
105 HEAD modified in ipw2100_tx()
107 tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring
108 TAIL modified ipw2100_tx()
109 HEAD modified by ipw2100_tx_send_data()
111 msg_free_list : Holds pre-allocated Msg (Command) buffers
112 TAIL modified in __ipw2100_tx_process()
113 HEAD modified in ipw2100_hw_send_command()
115 msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring
116 TAIL modified in ipw2100_hw_send_command()
117 HEAD modified in ipw2100_tx_send_commands()
119 The flow of data on the TX side is as follows:
121 MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST
122 TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST
124 The methods that work on the TBD ring are protected via priv->low_lock.
126 - The internal data state of the device itself
127 - Access to the firmware read/write indexes for the BD queues
130 All external entry functions are locked with the priv->action_lock to ensure
131 that only one external action is invoked at a time.
136 #include <linux/compiler.h>
137 #include <linux/errno.h>
138 #include <linux/if_arp.h>
139 #include <linux/in6.h>
140 #include <linux/in.h>
141 #include <linux/ip.h>
142 #include <linux/kernel.h>
143 #include <linux/kmod.h>
144 #include <linux/module.h>
145 #include <linux/netdevice.h>
146 #include <linux/ethtool.h>
147 #include <linux/pci.h>
148 #include <linux/dma-mapping.h>
149 #include <linux/proc_fs.h>
150 #include <linux/skbuff.h>
151 #include <asm/uaccess.h>
153 #include <linux/fs.h>
154 #include <linux/mm.h>
155 #include <linux/slab.h>
156 #include <linux/unistd.h>
157 #include <linux/stringify.h>
158 #include <linux/tcp.h>
159 #include <linux/types.h>
160 #include <linux/time.h>
161 #include <linux/firmware.h>
162 #include <linux/acpi.h>
163 #include <linux/ctype.h>
164 #include <linux/pm_qos_params.h>
166 #include <net/lib80211.h>
170 #define IPW2100_VERSION "git-1.2.2"
172 #define DRV_NAME "ipw2100"
173 #define DRV_VERSION IPW2100_VERSION
174 #define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2100 Network Driver"
175 #define DRV_COPYRIGHT "Copyright(c) 2003-2006 Intel Corporation"
177 static struct pm_qos_request_list ipw2100_pm_qos_req
;
179 /* Debugging stuff */
180 #ifdef CONFIG_IPW2100_DEBUG
181 #define IPW2100_RX_DEBUG /* Reception debugging */
184 MODULE_DESCRIPTION(DRV_DESCRIPTION
);
185 MODULE_VERSION(DRV_VERSION
);
186 MODULE_AUTHOR(DRV_COPYRIGHT
);
187 MODULE_LICENSE("GPL");
189 static int debug
= 0;
190 static int network_mode
= 0;
191 static int channel
= 0;
192 static int associate
= 0;
193 static int disable
= 0;
195 static struct ipw2100_fw ipw2100_firmware
;
198 #include <linux/moduleparam.h>
199 module_param(debug
, int, 0444);
200 module_param_named(mode
, network_mode
, int, 0444);
201 module_param(channel
, int, 0444);
202 module_param(associate
, int, 0444);
203 module_param(disable
, int, 0444);
205 MODULE_PARM_DESC(debug
, "debug level");
206 MODULE_PARM_DESC(mode
, "network mode (0=BSS,1=IBSS,2=Monitor)");
207 MODULE_PARM_DESC(channel
, "channel");
208 MODULE_PARM_DESC(associate
, "auto associate when scanning (default off)");
209 MODULE_PARM_DESC(disable
, "manually disable the radio (default 0 [radio on])");
211 static u32 ipw2100_debug_level
= IPW_DL_NONE
;
213 #ifdef CONFIG_IPW2100_DEBUG
214 #define IPW_DEBUG(level, message...) \
216 if (ipw2100_debug_level & (level)) { \
217 printk(KERN_DEBUG "ipw2100: %c %s ", \
218 in_interrupt() ? 'I' : 'U', __func__); \
223 #define IPW_DEBUG(level, message...) do {} while (0)
224 #endif /* CONFIG_IPW2100_DEBUG */
226 #ifdef CONFIG_IPW2100_DEBUG
227 static const char *command_types
[] = {
229 "unused", /* HOST_ATTENTION */
231 "unused", /* SLEEP */
232 "unused", /* HOST_POWER_DOWN */
235 "unused", /* SET_IMR */
238 "AUTHENTICATION_TYPE",
241 "INTERNATIONAL_MODE",
256 "CLEAR_ALL_MULTICAST",
277 "AP_OR_STATION_TABLE",
281 "unused", /* SAVE_CALIBRATION */
282 "unused", /* RESTORE_CALIBRATION */
286 "HOST_PRE_POWER_DOWN",
287 "unused", /* HOST_INTERRUPT_COALESCING */
289 "CARD_DISABLE_PHY_OFF",
290 "MSDU_TX_RATES" "undefined",
292 "SET_STATION_STAT_BITS",
293 "CLEAR_STATIONS_STAT_BITS",
295 "SET_SECURITY_INFORMATION",
296 "DISASSOCIATION_BSSID",
301 #define WEXT_USECHANNELS 1
303 static const long ipw2100_frequencies
[] = {
304 2412, 2417, 2422, 2427,
305 2432, 2437, 2442, 2447,
306 2452, 2457, 2462, 2467,
310 #define FREQ_COUNT ARRAY_SIZE(ipw2100_frequencies)
312 static const long ipw2100_rates_11b
[] = {
319 static struct ieee80211_rate ipw2100_bg_rates
[] = {
321 { .bitrate
= 20, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
322 { .bitrate
= 55, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
323 { .bitrate
= 110, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
326 #define RATE_COUNT ARRAY_SIZE(ipw2100_rates_11b)
328 /* Pre-decl until we get the code solid and then we can clean it up */
329 static void ipw2100_tx_send_commands(struct ipw2100_priv
*priv
);
330 static void ipw2100_tx_send_data(struct ipw2100_priv
*priv
);
331 static int ipw2100_adapter_setup(struct ipw2100_priv
*priv
);
333 static void ipw2100_queues_initialize(struct ipw2100_priv
*priv
);
334 static void ipw2100_queues_free(struct ipw2100_priv
*priv
);
335 static int ipw2100_queues_allocate(struct ipw2100_priv
*priv
);
337 static int ipw2100_fw_download(struct ipw2100_priv
*priv
,
338 struct ipw2100_fw
*fw
);
339 static int ipw2100_get_firmware(struct ipw2100_priv
*priv
,
340 struct ipw2100_fw
*fw
);
341 static int ipw2100_get_fwversion(struct ipw2100_priv
*priv
, char *buf
,
343 static int ipw2100_get_ucodeversion(struct ipw2100_priv
*priv
, char *buf
,
345 static void ipw2100_release_firmware(struct ipw2100_priv
*priv
,
346 struct ipw2100_fw
*fw
);
347 static int ipw2100_ucode_download(struct ipw2100_priv
*priv
,
348 struct ipw2100_fw
*fw
);
349 static void ipw2100_wx_event_work(struct work_struct
*work
);
350 static struct iw_statistics
*ipw2100_wx_wireless_stats(struct net_device
*dev
);
351 static struct iw_handler_def ipw2100_wx_handler_def
;
353 static inline void read_register(struct net_device
*dev
, u32 reg
, u32
* val
)
355 *val
= readl((void __iomem
*)(dev
->base_addr
+ reg
));
356 IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg
, *val
);
359 static inline void write_register(struct net_device
*dev
, u32 reg
, u32 val
)
361 writel(val
, (void __iomem
*)(dev
->base_addr
+ reg
));
362 IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg
, val
);
365 static inline void read_register_word(struct net_device
*dev
, u32 reg
,
368 *val
= readw((void __iomem
*)(dev
->base_addr
+ reg
));
369 IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg
, *val
);
372 static inline void read_register_byte(struct net_device
*dev
, u32 reg
, u8
* val
)
374 *val
= readb((void __iomem
*)(dev
->base_addr
+ reg
));
375 IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg
, *val
);
378 static inline void write_register_word(struct net_device
*dev
, u32 reg
, u16 val
)
380 writew(val
, (void __iomem
*)(dev
->base_addr
+ reg
));
381 IPW_DEBUG_IO("w: 0x%08X <= %04X\n", reg
, val
);
384 static inline void write_register_byte(struct net_device
*dev
, u32 reg
, u8 val
)
386 writeb(val
, (void __iomem
*)(dev
->base_addr
+ reg
));
387 IPW_DEBUG_IO("w: 0x%08X =< %02X\n", reg
, val
);
390 static inline void read_nic_dword(struct net_device
*dev
, u32 addr
, u32
* val
)
392 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
393 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
394 read_register(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
397 static inline void write_nic_dword(struct net_device
*dev
, u32 addr
, u32 val
)
399 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
400 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
401 write_register(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
404 static inline void read_nic_word(struct net_device
*dev
, u32 addr
, u16
* val
)
406 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
407 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
408 read_register_word(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
411 static inline void write_nic_word(struct net_device
*dev
, u32 addr
, u16 val
)
413 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
414 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
415 write_register_word(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
418 static inline void read_nic_byte(struct net_device
*dev
, u32 addr
, u8
* val
)
420 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
421 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
422 read_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
425 static inline void write_nic_byte(struct net_device
*dev
, u32 addr
, u8 val
)
427 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
428 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
429 write_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
432 static inline void write_nic_auto_inc_address(struct net_device
*dev
, u32 addr
)
434 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
,
435 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
438 static inline void write_nic_dword_auto_inc(struct net_device
*dev
, u32 val
)
440 write_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, val
);
443 static void write_nic_memory(struct net_device
*dev
, u32 addr
, u32 len
,
451 /* read first nibble byte by byte */
452 aligned_addr
= addr
& (~0x3);
453 dif_len
= addr
- aligned_addr
;
455 /* Start reading at aligned_addr + dif_len */
456 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
458 for (i
= dif_len
; i
< 4; i
++, buf
++)
459 write_register_byte(dev
,
460 IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
467 /* read DWs through autoincrement registers */
468 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
, aligned_addr
);
469 aligned_len
= len
& (~0x3);
470 for (i
= 0; i
< aligned_len
; i
+= 4, buf
+= 4, aligned_addr
+= 4)
471 write_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, *(u32
*) buf
);
473 /* copy the last nibble */
474 dif_len
= len
- aligned_len
;
475 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
, aligned_addr
);
476 for (i
= 0; i
< dif_len
; i
++, buf
++)
477 write_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
481 static void read_nic_memory(struct net_device
*dev
, u32 addr
, u32 len
,
489 /* read first nibble byte by byte */
490 aligned_addr
= addr
& (~0x3);
491 dif_len
= addr
- aligned_addr
;
493 /* Start reading at aligned_addr + dif_len */
494 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
496 for (i
= dif_len
; i
< 4; i
++, buf
++)
497 read_register_byte(dev
,
498 IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
505 /* read DWs through autoincrement registers */
506 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
, aligned_addr
);
507 aligned_len
= len
& (~0x3);
508 for (i
= 0; i
< aligned_len
; i
+= 4, buf
+= 4, aligned_addr
+= 4)
509 read_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, (u32
*) buf
);
511 /* copy the last nibble */
512 dif_len
= len
- aligned_len
;
513 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
, aligned_addr
);
514 for (i
= 0; i
< dif_len
; i
++, buf
++)
515 read_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
+ i
, buf
);
518 static inline int ipw2100_hw_is_adapter_in_system(struct net_device
*dev
)
520 return (dev
->base_addr
&&
522 ((void __iomem
*)(dev
->base_addr
+
523 IPW_REG_DOA_DEBUG_AREA_START
))
524 == IPW_DATA_DOA_DEBUG_VALUE
));
527 static int ipw2100_get_ordinal(struct ipw2100_priv
*priv
, u32 ord
,
528 void *val
, u32
* len
)
530 struct ipw2100_ordinals
*ordinals
= &priv
->ordinals
;
537 if (ordinals
->table1_addr
== 0) {
538 printk(KERN_WARNING DRV_NAME
": attempt to use fw ordinals "
539 "before they have been loaded.\n");
543 if (IS_ORDINAL_TABLE_ONE(ordinals
, ord
)) {
544 if (*len
< IPW_ORD_TAB_1_ENTRY_SIZE
) {
545 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
547 printk(KERN_WARNING DRV_NAME
548 ": ordinal buffer length too small, need %zd\n",
549 IPW_ORD_TAB_1_ENTRY_SIZE
);
554 read_nic_dword(priv
->net_dev
,
555 ordinals
->table1_addr
+ (ord
<< 2), &addr
);
556 read_nic_dword(priv
->net_dev
, addr
, val
);
558 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
563 if (IS_ORDINAL_TABLE_TWO(ordinals
, ord
)) {
565 ord
-= IPW_START_ORD_TAB_2
;
567 /* get the address of statistic */
568 read_nic_dword(priv
->net_dev
,
569 ordinals
->table2_addr
+ (ord
<< 3), &addr
);
571 /* get the second DW of statistics ;
572 * two 16-bit words - first is length, second is count */
573 read_nic_dword(priv
->net_dev
,
574 ordinals
->table2_addr
+ (ord
<< 3) + sizeof(u32
),
577 /* get each entry length */
578 field_len
= *((u16
*) & field_info
);
580 /* get number of entries */
581 field_count
= *(((u16
*) & field_info
) + 1);
583 /* abort if no enough memory */
584 total_length
= field_len
* field_count
;
585 if (total_length
> *len
) {
594 /* read the ordinal data from the SRAM */
595 read_nic_memory(priv
->net_dev
, addr
, total_length
, val
);
600 printk(KERN_WARNING DRV_NAME
": ordinal %d neither in table 1 nor "
601 "in table 2\n", ord
);
606 static int ipw2100_set_ordinal(struct ipw2100_priv
*priv
, u32 ord
, u32
* val
,
609 struct ipw2100_ordinals
*ordinals
= &priv
->ordinals
;
612 if (IS_ORDINAL_TABLE_ONE(ordinals
, ord
)) {
613 if (*len
!= IPW_ORD_TAB_1_ENTRY_SIZE
) {
614 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
615 IPW_DEBUG_INFO("wrong size\n");
619 read_nic_dword(priv
->net_dev
,
620 ordinals
->table1_addr
+ (ord
<< 2), &addr
);
622 write_nic_dword(priv
->net_dev
, addr
, *val
);
624 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
629 IPW_DEBUG_INFO("wrong table\n");
630 if (IS_ORDINAL_TABLE_TWO(ordinals
, ord
))
636 static char *snprint_line(char *buf
, size_t count
,
637 const u8
* data
, u32 len
, u32 ofs
)
642 out
= snprintf(buf
, count
, "%08X", ofs
);
644 for (l
= 0, i
= 0; i
< 2; i
++) {
645 out
+= snprintf(buf
+ out
, count
- out
, " ");
646 for (j
= 0; j
< 8 && l
< len
; j
++, l
++)
647 out
+= snprintf(buf
+ out
, count
- out
, "%02X ",
650 out
+= snprintf(buf
+ out
, count
- out
, " ");
653 out
+= snprintf(buf
+ out
, count
- out
, " ");
654 for (l
= 0, i
= 0; i
< 2; i
++) {
655 out
+= snprintf(buf
+ out
, count
- out
, " ");
656 for (j
= 0; j
< 8 && l
< len
; j
++, l
++) {
657 c
= data
[(i
* 8 + j
)];
658 if (!isascii(c
) || !isprint(c
))
661 out
+= snprintf(buf
+ out
, count
- out
, "%c", c
);
665 out
+= snprintf(buf
+ out
, count
- out
, " ");
671 static void printk_buf(int level
, const u8
* data
, u32 len
)
675 if (!(ipw2100_debug_level
& level
))
679 printk(KERN_DEBUG
"%s\n",
680 snprint_line(line
, sizeof(line
), &data
[ofs
],
681 min(len
, 16U), ofs
));
683 len
-= min(len
, 16U);
687 #define MAX_RESET_BACKOFF 10
689 static void schedule_reset(struct ipw2100_priv
*priv
)
691 unsigned long now
= get_seconds();
693 /* If we haven't received a reset request within the backoff period,
694 * then we can reset the backoff interval so this reset occurs
696 if (priv
->reset_backoff
&&
697 (now
- priv
->last_reset
> priv
->reset_backoff
))
698 priv
->reset_backoff
= 0;
700 priv
->last_reset
= get_seconds();
702 if (!(priv
->status
& STATUS_RESET_PENDING
)) {
703 IPW_DEBUG_INFO("%s: Scheduling firmware restart (%ds).\n",
704 priv
->net_dev
->name
, priv
->reset_backoff
);
705 netif_carrier_off(priv
->net_dev
);
706 netif_stop_queue(priv
->net_dev
);
707 priv
->status
|= STATUS_RESET_PENDING
;
708 if (priv
->reset_backoff
)
709 queue_delayed_work(priv
->workqueue
, &priv
->reset_work
,
710 priv
->reset_backoff
* HZ
);
712 queue_delayed_work(priv
->workqueue
, &priv
->reset_work
,
715 if (priv
->reset_backoff
< MAX_RESET_BACKOFF
)
716 priv
->reset_backoff
++;
718 wake_up_interruptible(&priv
->wait_command_queue
);
720 IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n",
721 priv
->net_dev
->name
);
725 #define HOST_COMPLETE_TIMEOUT (2 * HZ)
726 static int ipw2100_hw_send_command(struct ipw2100_priv
*priv
,
727 struct host_command
*cmd
)
729 struct list_head
*element
;
730 struct ipw2100_tx_packet
*packet
;
734 IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n",
735 command_types
[cmd
->host_command
], cmd
->host_command
,
736 cmd
->host_command_length
);
737 printk_buf(IPW_DL_HC
, (u8
*) cmd
->host_command_parameters
,
738 cmd
->host_command_length
);
740 spin_lock_irqsave(&priv
->low_lock
, flags
);
742 if (priv
->fatal_error
) {
744 ("Attempt to send command while hardware in fatal error condition.\n");
749 if (!(priv
->status
& STATUS_RUNNING
)) {
751 ("Attempt to send command while hardware is not running.\n");
756 if (priv
->status
& STATUS_CMD_ACTIVE
) {
758 ("Attempt to send command while another command is pending.\n");
763 if (list_empty(&priv
->msg_free_list
)) {
764 IPW_DEBUG_INFO("no available msg buffers\n");
768 priv
->status
|= STATUS_CMD_ACTIVE
;
769 priv
->messages_sent
++;
771 element
= priv
->msg_free_list
.next
;
773 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
774 packet
->jiffy_start
= jiffies
;
776 /* initialize the firmware command packet */
777 packet
->info
.c_struct
.cmd
->host_command_reg
= cmd
->host_command
;
778 packet
->info
.c_struct
.cmd
->host_command_reg1
= cmd
->host_command1
;
779 packet
->info
.c_struct
.cmd
->host_command_len_reg
=
780 cmd
->host_command_length
;
781 packet
->info
.c_struct
.cmd
->sequence
= cmd
->host_command_sequence
;
783 memcpy(packet
->info
.c_struct
.cmd
->host_command_params_reg
,
784 cmd
->host_command_parameters
,
785 sizeof(packet
->info
.c_struct
.cmd
->host_command_params_reg
));
788 DEC_STAT(&priv
->msg_free_stat
);
790 list_add_tail(element
, &priv
->msg_pend_list
);
791 INC_STAT(&priv
->msg_pend_stat
);
793 ipw2100_tx_send_commands(priv
);
794 ipw2100_tx_send_data(priv
);
796 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
799 * We must wait for this command to complete before another
800 * command can be sent... but if we wait more than 3 seconds
801 * then there is a problem.
805 wait_event_interruptible_timeout(priv
->wait_command_queue
,
807 status
& STATUS_CMD_ACTIVE
),
808 HOST_COMPLETE_TIMEOUT
);
811 IPW_DEBUG_INFO("Command completion failed out after %dms.\n",
812 1000 * (HOST_COMPLETE_TIMEOUT
/ HZ
));
813 priv
->fatal_error
= IPW2100_ERR_MSG_TIMEOUT
;
814 priv
->status
&= ~STATUS_CMD_ACTIVE
;
815 schedule_reset(priv
);
819 if (priv
->fatal_error
) {
820 printk(KERN_WARNING DRV_NAME
": %s: firmware fatal error\n",
821 priv
->net_dev
->name
);
825 /* !!!!! HACK TEST !!!!!
826 * When lots of debug trace statements are enabled, the driver
827 * doesn't seem to have as many firmware restart cycles...
829 * As a test, we're sticking in a 1/100s delay here */
830 schedule_timeout_uninterruptible(msecs_to_jiffies(10));
835 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
841 * Verify the values and data access of the hardware
842 * No locks needed or used. No functions called.
844 static int ipw2100_verify(struct ipw2100_priv
*priv
)
849 u32 val1
= 0x76543210;
850 u32 val2
= 0xFEDCBA98;
852 /* Domain 0 check - all values should be DOA_DEBUG */
853 for (address
= IPW_REG_DOA_DEBUG_AREA_START
;
854 address
< IPW_REG_DOA_DEBUG_AREA_END
; address
+= sizeof(u32
)) {
855 read_register(priv
->net_dev
, address
, &data1
);
856 if (data1
!= IPW_DATA_DOA_DEBUG_VALUE
)
860 /* Domain 1 check - use arbitrary read/write compare */
861 for (address
= 0; address
< 5; address
++) {
862 /* The memory area is not used now */
863 write_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x32,
865 write_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x36,
867 read_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x32,
869 read_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x36,
871 if (val1
== data1
&& val2
== data2
)
880 * Loop until the CARD_DISABLED bit is the same value as the
883 * TODO: See if it would be more efficient to do a wait/wake
884 * cycle and have the completion event trigger the wakeup
887 #define IPW_CARD_DISABLE_COMPLETE_WAIT 100 // 100 milli
888 static int ipw2100_wait_for_card_state(struct ipw2100_priv
*priv
, int state
)
892 u32 len
= sizeof(card_state
);
895 for (i
= 0; i
<= IPW_CARD_DISABLE_COMPLETE_WAIT
* 1000; i
+= 50) {
896 err
= ipw2100_get_ordinal(priv
, IPW_ORD_CARD_DISABLED
,
899 IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal "
904 /* We'll break out if either the HW state says it is
905 * in the state we want, or if HOST_COMPLETE command
907 if ((card_state
== state
) ||
908 ((priv
->status
& STATUS_ENABLED
) ?
909 IPW_HW_STATE_ENABLED
: IPW_HW_STATE_DISABLED
) == state
) {
910 if (state
== IPW_HW_STATE_ENABLED
)
911 priv
->status
|= STATUS_ENABLED
;
913 priv
->status
&= ~STATUS_ENABLED
;
921 IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n",
922 state
? "DISABLED" : "ENABLED");
926 /*********************************************************************
927 Procedure : sw_reset_and_clock
928 Purpose : Asserts s/w reset, asserts clock initialization
929 and waits for clock stabilization
930 ********************************************************************/
931 static int sw_reset_and_clock(struct ipw2100_priv
*priv
)
937 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
938 IPW_AUX_HOST_RESET_REG_SW_RESET
);
940 // wait for clock stabilization
941 for (i
= 0; i
< 1000; i
++) {
942 udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY
);
944 // check clock ready bit
945 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, &r
);
946 if (r
& IPW_AUX_HOST_RESET_REG_PRINCETON_RESET
)
951 return -EIO
; // TODO: better error value
953 /* set "initialization complete" bit to move adapter to
955 write_register(priv
->net_dev
, IPW_REG_GP_CNTRL
,
956 IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE
);
958 /* wait for clock stabilization */
959 for (i
= 0; i
< 10000; i
++) {
960 udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY
* 4);
962 /* check clock ready bit */
963 read_register(priv
->net_dev
, IPW_REG_GP_CNTRL
, &r
);
964 if (r
& IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY
)
969 return -EIO
; /* TODO: better error value */
971 /* set D0 standby bit */
972 read_register(priv
->net_dev
, IPW_REG_GP_CNTRL
, &r
);
973 write_register(priv
->net_dev
, IPW_REG_GP_CNTRL
,
974 r
| IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY
);
979 /*********************************************************************
980 Procedure : ipw2100_download_firmware
981 Purpose : Initiaze adapter after power on.
983 1. assert s/w reset first!
984 2. awake clocks & wait for clock stabilization
985 3. hold ARC (don't ask me why...)
986 4. load Dino ucode and reset/clock init again
987 5. zero-out shared mem
989 *******************************************************************/
990 static int ipw2100_download_firmware(struct ipw2100_priv
*priv
)
996 /* Fetch the firmware and microcode */
997 struct ipw2100_fw ipw2100_firmware
;
1000 if (priv
->fatal_error
) {
1001 IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after "
1002 "fatal error %d. Interface must be brought down.\n",
1003 priv
->net_dev
->name
, priv
->fatal_error
);
1007 if (!ipw2100_firmware
.version
) {
1008 err
= ipw2100_get_firmware(priv
, &ipw2100_firmware
);
1010 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1011 priv
->net_dev
->name
, err
);
1012 priv
->fatal_error
= IPW2100_ERR_FW_LOAD
;
1017 err
= ipw2100_get_firmware(priv
, &ipw2100_firmware
);
1019 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1020 priv
->net_dev
->name
, err
);
1021 priv
->fatal_error
= IPW2100_ERR_FW_LOAD
;
1025 priv
->firmware_version
= ipw2100_firmware
.version
;
1027 /* s/w reset and clock stabilization */
1028 err
= sw_reset_and_clock(priv
);
1030 IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n",
1031 priv
->net_dev
->name
, err
);
1035 err
= ipw2100_verify(priv
);
1037 IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n",
1038 priv
->net_dev
->name
, err
);
1043 write_nic_dword(priv
->net_dev
,
1044 IPW_INTERNAL_REGISTER_HALT_AND_RESET
, 0x80000000);
1046 /* allow ARC to run */
1047 write_register(priv
->net_dev
, IPW_REG_RESET_REG
, 0);
1049 /* load microcode */
1050 err
= ipw2100_ucode_download(priv
, &ipw2100_firmware
);
1052 printk(KERN_ERR DRV_NAME
": %s: Error loading microcode: %d\n",
1053 priv
->net_dev
->name
, err
);
1058 write_nic_dword(priv
->net_dev
,
1059 IPW_INTERNAL_REGISTER_HALT_AND_RESET
, 0x00000000);
1061 /* s/w reset and clock stabilization (again!!!) */
1062 err
= sw_reset_and_clock(priv
);
1064 printk(KERN_ERR DRV_NAME
1065 ": %s: sw_reset_and_clock failed: %d\n",
1066 priv
->net_dev
->name
, err
);
1071 err
= ipw2100_fw_download(priv
, &ipw2100_firmware
);
1073 IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n",
1074 priv
->net_dev
->name
, err
);
1079 * When the .resume method of the driver is called, the other
1080 * part of the system, i.e. the ide driver could still stay in
1081 * the suspend stage. This prevents us from loading the firmware
1082 * from the disk. --YZ
1085 /* free any storage allocated for firmware image */
1086 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
1089 /* zero out Domain 1 area indirectly (Si requirement) */
1090 for (address
= IPW_HOST_FW_SHARED_AREA0
;
1091 address
< IPW_HOST_FW_SHARED_AREA0_END
; address
+= 4)
1092 write_nic_dword(priv
->net_dev
, address
, 0);
1093 for (address
= IPW_HOST_FW_SHARED_AREA1
;
1094 address
< IPW_HOST_FW_SHARED_AREA1_END
; address
+= 4)
1095 write_nic_dword(priv
->net_dev
, address
, 0);
1096 for (address
= IPW_HOST_FW_SHARED_AREA2
;
1097 address
< IPW_HOST_FW_SHARED_AREA2_END
; address
+= 4)
1098 write_nic_dword(priv
->net_dev
, address
, 0);
1099 for (address
= IPW_HOST_FW_SHARED_AREA3
;
1100 address
< IPW_HOST_FW_SHARED_AREA3_END
; address
+= 4)
1101 write_nic_dword(priv
->net_dev
, address
, 0);
1102 for (address
= IPW_HOST_FW_INTERRUPT_AREA
;
1103 address
< IPW_HOST_FW_INTERRUPT_AREA_END
; address
+= 4)
1104 write_nic_dword(priv
->net_dev
, address
, 0);
1109 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
1113 static inline void ipw2100_enable_interrupts(struct ipw2100_priv
*priv
)
1115 if (priv
->status
& STATUS_INT_ENABLED
)
1117 priv
->status
|= STATUS_INT_ENABLED
;
1118 write_register(priv
->net_dev
, IPW_REG_INTA_MASK
, IPW_INTERRUPT_MASK
);
1121 static inline void ipw2100_disable_interrupts(struct ipw2100_priv
*priv
)
1123 if (!(priv
->status
& STATUS_INT_ENABLED
))
1125 priv
->status
&= ~STATUS_INT_ENABLED
;
1126 write_register(priv
->net_dev
, IPW_REG_INTA_MASK
, 0x0);
1129 static void ipw2100_initialize_ordinals(struct ipw2100_priv
*priv
)
1131 struct ipw2100_ordinals
*ord
= &priv
->ordinals
;
1133 IPW_DEBUG_INFO("enter\n");
1135 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1
,
1138 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2
,
1141 read_nic_dword(priv
->net_dev
, ord
->table1_addr
, &ord
->table1_size
);
1142 read_nic_dword(priv
->net_dev
, ord
->table2_addr
, &ord
->table2_size
);
1144 ord
->table2_size
&= 0x0000FFFF;
1146 IPW_DEBUG_INFO("table 1 size: %d\n", ord
->table1_size
);
1147 IPW_DEBUG_INFO("table 2 size: %d\n", ord
->table2_size
);
1148 IPW_DEBUG_INFO("exit\n");
1151 static inline void ipw2100_hw_set_gpio(struct ipw2100_priv
*priv
)
1155 * Set GPIO 3 writable by FW; GPIO 1 writable
1156 * by driver and enable clock
1158 reg
= (IPW_BIT_GPIO_GPIO3_MASK
| IPW_BIT_GPIO_GPIO1_ENABLE
|
1159 IPW_BIT_GPIO_LED_OFF
);
1160 write_register(priv
->net_dev
, IPW_REG_GPIO
, reg
);
1163 static int rf_kill_active(struct ipw2100_priv
*priv
)
1165 #define MAX_RF_KILL_CHECKS 5
1166 #define RF_KILL_CHECK_DELAY 40
1168 unsigned short value
= 0;
1172 if (!(priv
->hw_features
& HW_FEATURE_RFKILL
)) {
1173 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, false);
1174 priv
->status
&= ~STATUS_RF_KILL_HW
;
1178 for (i
= 0; i
< MAX_RF_KILL_CHECKS
; i
++) {
1179 udelay(RF_KILL_CHECK_DELAY
);
1180 read_register(priv
->net_dev
, IPW_REG_GPIO
, ®
);
1181 value
= (value
<< 1) | ((reg
& IPW_BIT_GPIO_RF_KILL
) ? 0 : 1);
1185 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, true);
1186 priv
->status
|= STATUS_RF_KILL_HW
;
1188 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, false);
1189 priv
->status
&= ~STATUS_RF_KILL_HW
;
1192 return (value
== 0);
1195 static int ipw2100_get_hw_features(struct ipw2100_priv
*priv
)
1201 * EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1
1204 if (ipw2100_get_ordinal
1205 (priv
, IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS
, &addr
, &len
)) {
1206 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1211 IPW_DEBUG_INFO("EEPROM address: %08X\n", addr
);
1214 * EEPROM version is the byte at offset 0xfd in firmware
1215 * We read 4 bytes, then shift out the byte we actually want */
1216 read_nic_dword(priv
->net_dev
, addr
+ 0xFC, &val
);
1217 priv
->eeprom_version
= (val
>> 24) & 0xFF;
1218 IPW_DEBUG_INFO("EEPROM version: %d\n", priv
->eeprom_version
);
1221 * HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware
1223 * notice that the EEPROM bit is reverse polarity, i.e.
1224 * bit = 0 signifies HW RF kill switch is supported
1225 * bit = 1 signifies HW RF kill switch is NOT supported
1227 read_nic_dword(priv
->net_dev
, addr
+ 0x20, &val
);
1228 if (!((val
>> 24) & 0x01))
1229 priv
->hw_features
|= HW_FEATURE_RFKILL
;
1231 IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n",
1232 (priv
->hw_features
& HW_FEATURE_RFKILL
) ? "" : "not ");
1238 * Start firmware execution after power on and intialization
1241 * 2. Wait for f/w initialization completes;
1243 static int ipw2100_start_adapter(struct ipw2100_priv
*priv
)
1246 u32 inta
, inta_mask
, gpio
;
1248 IPW_DEBUG_INFO("enter\n");
1250 if (priv
->status
& STATUS_RUNNING
)
1254 * Initialize the hw - drive adapter to DO state by setting
1255 * init_done bit. Wait for clk_ready bit and Download
1258 if (ipw2100_download_firmware(priv
)) {
1259 printk(KERN_ERR DRV_NAME
1260 ": %s: Failed to power on the adapter.\n",
1261 priv
->net_dev
->name
);
1265 /* Clear the Tx, Rx and Msg queues and the r/w indexes
1266 * in the firmware RBD and TBD ring queue */
1267 ipw2100_queues_initialize(priv
);
1269 ipw2100_hw_set_gpio(priv
);
1271 /* TODO -- Look at disabling interrupts here to make sure none
1272 * get fired during FW initialization */
1274 /* Release ARC - clear reset bit */
1275 write_register(priv
->net_dev
, IPW_REG_RESET_REG
, 0);
1277 /* wait for f/w intialization complete */
1278 IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
1281 schedule_timeout_uninterruptible(msecs_to_jiffies(40));
1282 /* Todo... wait for sync command ... */
1284 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
1286 /* check "init done" bit */
1287 if (inta
& IPW2100_INTA_FW_INIT_DONE
) {
1288 /* reset "init done" bit */
1289 write_register(priv
->net_dev
, IPW_REG_INTA
,
1290 IPW2100_INTA_FW_INIT_DONE
);
1294 /* check error conditions : we check these after the firmware
1295 * check so that if there is an error, the interrupt handler
1296 * will see it and the adapter will be reset */
1298 (IPW2100_INTA_FATAL_ERROR
| IPW2100_INTA_PARITY_ERROR
)) {
1299 /* clear error conditions */
1300 write_register(priv
->net_dev
, IPW_REG_INTA
,
1301 IPW2100_INTA_FATAL_ERROR
|
1302 IPW2100_INTA_PARITY_ERROR
);
1306 /* Clear out any pending INTAs since we aren't supposed to have
1307 * interrupts enabled at this point... */
1308 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
1309 read_register(priv
->net_dev
, IPW_REG_INTA_MASK
, &inta_mask
);
1310 inta
&= IPW_INTERRUPT_MASK
;
1311 /* Clear out any pending interrupts */
1312 if (inta
& inta_mask
)
1313 write_register(priv
->net_dev
, IPW_REG_INTA
, inta
);
1315 IPW_DEBUG_FW("f/w initialization complete: %s\n",
1316 i
? "SUCCESS" : "FAILED");
1319 printk(KERN_WARNING DRV_NAME
1320 ": %s: Firmware did not initialize.\n",
1321 priv
->net_dev
->name
);
1325 /* allow firmware to write to GPIO1 & GPIO3 */
1326 read_register(priv
->net_dev
, IPW_REG_GPIO
, &gpio
);
1328 gpio
|= (IPW_BIT_GPIO_GPIO1_MASK
| IPW_BIT_GPIO_GPIO3_MASK
);
1330 write_register(priv
->net_dev
, IPW_REG_GPIO
, gpio
);
1332 /* Ready to receive commands */
1333 priv
->status
|= STATUS_RUNNING
;
1335 /* The adapter has been reset; we are not associated */
1336 priv
->status
&= ~(STATUS_ASSOCIATING
| STATUS_ASSOCIATED
);
1338 IPW_DEBUG_INFO("exit\n");
1343 static inline void ipw2100_reset_fatalerror(struct ipw2100_priv
*priv
)
1345 if (!priv
->fatal_error
)
1348 priv
->fatal_errors
[priv
->fatal_index
++] = priv
->fatal_error
;
1349 priv
->fatal_index
%= IPW2100_ERROR_QUEUE
;
1350 priv
->fatal_error
= 0;
1353 /* NOTE: Our interrupt is disabled when this method is called */
1354 static int ipw2100_power_cycle_adapter(struct ipw2100_priv
*priv
)
1359 IPW_DEBUG_INFO("Power cycling the hardware.\n");
1361 ipw2100_hw_set_gpio(priv
);
1363 /* Step 1. Stop Master Assert */
1364 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1365 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
1367 /* Step 2. Wait for stop Master Assert
1368 * (not more than 50us, otherwise ret error */
1371 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY
);
1372 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
1374 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
1378 priv
->status
&= ~STATUS_RESET_PENDING
;
1382 ("exit - waited too long for master assert stop\n");
1386 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1387 IPW_AUX_HOST_RESET_REG_SW_RESET
);
1389 /* Reset any fatal_error conditions */
1390 ipw2100_reset_fatalerror(priv
);
1392 /* At this point, the adapter is now stopped and disabled */
1393 priv
->status
&= ~(STATUS_RUNNING
| STATUS_ASSOCIATING
|
1394 STATUS_ASSOCIATED
| STATUS_ENABLED
);
1400 * Send the CARD_DISABLE_PHY_OFF comamnd to the card to disable it
1402 * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent.
1404 * STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of
1405 * if STATUS_ASSN_LOST is sent.
1407 static int ipw2100_hw_phy_off(struct ipw2100_priv
*priv
)
1410 #define HW_PHY_OFF_LOOP_DELAY (HZ / 5000)
1412 struct host_command cmd
= {
1413 .host_command
= CARD_DISABLE_PHY_OFF
,
1414 .host_command_sequence
= 0,
1415 .host_command_length
= 0,
1420 IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n");
1422 /* Turn off the radio */
1423 err
= ipw2100_hw_send_command(priv
, &cmd
);
1427 for (i
= 0; i
< 2500; i
++) {
1428 read_nic_dword(priv
->net_dev
, IPW2100_CONTROL_REG
, &val1
);
1429 read_nic_dword(priv
->net_dev
, IPW2100_COMMAND
, &val2
);
1431 if ((val1
& IPW2100_CONTROL_PHY_OFF
) &&
1432 (val2
& IPW2100_COMMAND_PHY_OFF
))
1435 schedule_timeout_uninterruptible(HW_PHY_OFF_LOOP_DELAY
);
1441 static int ipw2100_enable_adapter(struct ipw2100_priv
*priv
)
1443 struct host_command cmd
= {
1444 .host_command
= HOST_COMPLETE
,
1445 .host_command_sequence
= 0,
1446 .host_command_length
= 0
1450 IPW_DEBUG_HC("HOST_COMPLETE\n");
1452 if (priv
->status
& STATUS_ENABLED
)
1455 mutex_lock(&priv
->adapter_mutex
);
1457 if (rf_kill_active(priv
)) {
1458 IPW_DEBUG_HC("Command aborted due to RF kill active.\n");
1462 err
= ipw2100_hw_send_command(priv
, &cmd
);
1464 IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n");
1468 err
= ipw2100_wait_for_card_state(priv
, IPW_HW_STATE_ENABLED
);
1470 IPW_DEBUG_INFO("%s: card not responding to init command.\n",
1471 priv
->net_dev
->name
);
1475 if (priv
->stop_hang_check
) {
1476 priv
->stop_hang_check
= 0;
1477 queue_delayed_work(priv
->workqueue
, &priv
->hang_check
, HZ
/ 2);
1481 mutex_unlock(&priv
->adapter_mutex
);
1485 static int ipw2100_hw_stop_adapter(struct ipw2100_priv
*priv
)
1487 #define HW_POWER_DOWN_DELAY (msecs_to_jiffies(100))
1489 struct host_command cmd
= {
1490 .host_command
= HOST_PRE_POWER_DOWN
,
1491 .host_command_sequence
= 0,
1492 .host_command_length
= 0,
1497 if (!(priv
->status
& STATUS_RUNNING
))
1500 priv
->status
|= STATUS_STOPPING
;
1502 /* We can only shut down the card if the firmware is operational. So,
1503 * if we haven't reset since a fatal_error, then we can not send the
1504 * shutdown commands. */
1505 if (!priv
->fatal_error
) {
1506 /* First, make sure the adapter is enabled so that the PHY_OFF
1507 * command can shut it down */
1508 ipw2100_enable_adapter(priv
);
1510 err
= ipw2100_hw_phy_off(priv
);
1512 printk(KERN_WARNING DRV_NAME
1513 ": Error disabling radio %d\n", err
);
1516 * If in D0-standby mode going directly to D3 may cause a
1517 * PCI bus violation. Therefore we must change out of the D0
1520 * Sending the PREPARE_FOR_POWER_DOWN will restrict the
1521 * hardware from going into standby mode and will transition
1522 * out of D0-standby if it is already in that state.
1524 * STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the
1525 * driver upon completion. Once received, the driver can
1526 * proceed to the D3 state.
1528 * Prepare for power down command to fw. This command would
1529 * take HW out of D0-standby and prepare it for D3 state.
1531 * Currently FW does not support event notification for this
1532 * event. Therefore, skip waiting for it. Just wait a fixed
1535 IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n");
1537 err
= ipw2100_hw_send_command(priv
, &cmd
);
1539 printk(KERN_WARNING DRV_NAME
": "
1540 "%s: Power down command failed: Error %d\n",
1541 priv
->net_dev
->name
, err
);
1543 schedule_timeout_uninterruptible(HW_POWER_DOWN_DELAY
);
1546 priv
->status
&= ~STATUS_ENABLED
;
1549 * Set GPIO 3 writable by FW; GPIO 1 writable
1550 * by driver and enable clock
1552 ipw2100_hw_set_gpio(priv
);
1555 * Power down adapter. Sequence:
1556 * 1. Stop master assert (RESET_REG[9]=1)
1557 * 2. Wait for stop master (RESET_REG[8]==1)
1558 * 3. S/w reset assert (RESET_REG[7] = 1)
1561 /* Stop master assert */
1562 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1563 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
1565 /* wait stop master not more than 50 usec.
1566 * Otherwise return error. */
1567 for (i
= 5; i
> 0; i
--) {
1570 /* Check master stop bit */
1571 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
1573 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
1578 printk(KERN_WARNING DRV_NAME
1579 ": %s: Could now power down adapter.\n",
1580 priv
->net_dev
->name
);
1582 /* assert s/w reset */
1583 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1584 IPW_AUX_HOST_RESET_REG_SW_RESET
);
1586 priv
->status
&= ~(STATUS_RUNNING
| STATUS_STOPPING
);
1591 static int ipw2100_disable_adapter(struct ipw2100_priv
*priv
)
1593 struct host_command cmd
= {
1594 .host_command
= CARD_DISABLE
,
1595 .host_command_sequence
= 0,
1596 .host_command_length
= 0
1600 IPW_DEBUG_HC("CARD_DISABLE\n");
1602 if (!(priv
->status
& STATUS_ENABLED
))
1605 /* Make sure we clear the associated state */
1606 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1608 if (!priv
->stop_hang_check
) {
1609 priv
->stop_hang_check
= 1;
1610 cancel_delayed_work(&priv
->hang_check
);
1613 mutex_lock(&priv
->adapter_mutex
);
1615 err
= ipw2100_hw_send_command(priv
, &cmd
);
1617 printk(KERN_WARNING DRV_NAME
1618 ": exit - failed to send CARD_DISABLE command\n");
1622 err
= ipw2100_wait_for_card_state(priv
, IPW_HW_STATE_DISABLED
);
1624 printk(KERN_WARNING DRV_NAME
1625 ": exit - card failed to change to DISABLED\n");
1629 IPW_DEBUG_INFO("TODO: implement scan state machine\n");
1632 mutex_unlock(&priv
->adapter_mutex
);
1636 static int ipw2100_set_scan_options(struct ipw2100_priv
*priv
)
1638 struct host_command cmd
= {
1639 .host_command
= SET_SCAN_OPTIONS
,
1640 .host_command_sequence
= 0,
1641 .host_command_length
= 8
1645 IPW_DEBUG_INFO("enter\n");
1647 IPW_DEBUG_SCAN("setting scan options\n");
1649 cmd
.host_command_parameters
[0] = 0;
1651 if (!(priv
->config
& CFG_ASSOCIATE
))
1652 cmd
.host_command_parameters
[0] |= IPW_SCAN_NOASSOCIATE
;
1653 if ((priv
->ieee
->sec
.flags
& SEC_ENABLED
) && priv
->ieee
->sec
.enabled
)
1654 cmd
.host_command_parameters
[0] |= IPW_SCAN_MIXED_CELL
;
1655 if (priv
->config
& CFG_PASSIVE_SCAN
)
1656 cmd
.host_command_parameters
[0] |= IPW_SCAN_PASSIVE
;
1658 cmd
.host_command_parameters
[1] = priv
->channel_mask
;
1660 err
= ipw2100_hw_send_command(priv
, &cmd
);
1662 IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n",
1663 cmd
.host_command_parameters
[0]);
1668 static int ipw2100_start_scan(struct ipw2100_priv
*priv
)
1670 struct host_command cmd
= {
1671 .host_command
= BROADCAST_SCAN
,
1672 .host_command_sequence
= 0,
1673 .host_command_length
= 4
1677 IPW_DEBUG_HC("START_SCAN\n");
1679 cmd
.host_command_parameters
[0] = 0;
1681 /* No scanning if in monitor mode */
1682 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
1685 if (priv
->status
& STATUS_SCANNING
) {
1686 IPW_DEBUG_SCAN("Scan requested while already in scan...\n");
1690 IPW_DEBUG_INFO("enter\n");
1692 /* Not clearing here; doing so makes iwlist always return nothing...
1694 * We should modify the table logic to use aging tables vs. clearing
1695 * the table on each scan start.
1697 IPW_DEBUG_SCAN("starting scan\n");
1699 priv
->status
|= STATUS_SCANNING
;
1700 err
= ipw2100_hw_send_command(priv
, &cmd
);
1702 priv
->status
&= ~STATUS_SCANNING
;
1704 IPW_DEBUG_INFO("exit\n");
1709 static const struct libipw_geo ipw_geos
[] = {
1713 .bg
= {{2412, 1}, {2417, 2}, {2422, 3},
1714 {2427, 4}, {2432, 5}, {2437, 6},
1715 {2442, 7}, {2447, 8}, {2452, 9},
1716 {2457, 10}, {2462, 11}, {2467, 12},
1717 {2472, 13}, {2484, 14}},
1721 static int ipw2100_up(struct ipw2100_priv
*priv
, int deferred
)
1723 unsigned long flags
;
1726 u32 ord_len
= sizeof(lock
);
1728 /* Age scan list entries found before suspend */
1729 if (priv
->suspend_time
) {
1730 libipw_networks_age(priv
->ieee
, priv
->suspend_time
);
1731 priv
->suspend_time
= 0;
1734 /* Quiet if manually disabled. */
1735 if (priv
->status
& STATUS_RF_KILL_SW
) {
1736 IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable "
1737 "switch\n", priv
->net_dev
->name
);
1741 /* the ipw2100 hardware really doesn't want power management delays
1742 * longer than 175usec
1744 pm_qos_update_request(&ipw2100_pm_qos_req
, 175);
1746 /* If the interrupt is enabled, turn it off... */
1747 spin_lock_irqsave(&priv
->low_lock
, flags
);
1748 ipw2100_disable_interrupts(priv
);
1750 /* Reset any fatal_error conditions */
1751 ipw2100_reset_fatalerror(priv
);
1752 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1754 if (priv
->status
& STATUS_POWERED
||
1755 (priv
->status
& STATUS_RESET_PENDING
)) {
1756 /* Power cycle the card ... */
1757 if (ipw2100_power_cycle_adapter(priv
)) {
1758 printk(KERN_WARNING DRV_NAME
1759 ": %s: Could not cycle adapter.\n",
1760 priv
->net_dev
->name
);
1765 priv
->status
|= STATUS_POWERED
;
1767 /* Load the firmware, start the clocks, etc. */
1768 if (ipw2100_start_adapter(priv
)) {
1769 printk(KERN_ERR DRV_NAME
1770 ": %s: Failed to start the firmware.\n",
1771 priv
->net_dev
->name
);
1776 ipw2100_initialize_ordinals(priv
);
1778 /* Determine capabilities of this particular HW configuration */
1779 if (ipw2100_get_hw_features(priv
)) {
1780 printk(KERN_ERR DRV_NAME
1781 ": %s: Failed to determine HW features.\n",
1782 priv
->net_dev
->name
);
1787 /* Initialize the geo */
1788 if (libipw_set_geo(priv
->ieee
, &ipw_geos
[0])) {
1789 printk(KERN_WARNING DRV_NAME
"Could not set geo\n");
1792 priv
->ieee
->freq_band
= LIBIPW_24GHZ_BAND
;
1795 if (ipw2100_set_ordinal(priv
, IPW_ORD_PERS_DB_LOCK
, &lock
, &ord_len
)) {
1796 printk(KERN_ERR DRV_NAME
1797 ": %s: Failed to clear ordinal lock.\n",
1798 priv
->net_dev
->name
);
1803 priv
->status
&= ~STATUS_SCANNING
;
1805 if (rf_kill_active(priv
)) {
1806 printk(KERN_INFO
"%s: Radio is disabled by RF switch.\n",
1807 priv
->net_dev
->name
);
1809 if (priv
->stop_rf_kill
) {
1810 priv
->stop_rf_kill
= 0;
1811 queue_delayed_work(priv
->workqueue
, &priv
->rf_kill
,
1812 round_jiffies_relative(HZ
));
1818 /* Turn on the interrupt so that commands can be processed */
1819 ipw2100_enable_interrupts(priv
);
1821 /* Send all of the commands that must be sent prior to
1823 if (ipw2100_adapter_setup(priv
)) {
1824 printk(KERN_ERR DRV_NAME
": %s: Failed to start the card.\n",
1825 priv
->net_dev
->name
);
1831 /* Enable the adapter - sends HOST_COMPLETE */
1832 if (ipw2100_enable_adapter(priv
)) {
1833 printk(KERN_ERR DRV_NAME
": "
1834 "%s: failed in call to enable adapter.\n",
1835 priv
->net_dev
->name
);
1836 ipw2100_hw_stop_adapter(priv
);
1841 /* Start a scan . . . */
1842 ipw2100_set_scan_options(priv
);
1843 ipw2100_start_scan(priv
);
1850 static void ipw2100_down(struct ipw2100_priv
*priv
)
1852 unsigned long flags
;
1853 union iwreq_data wrqu
= {
1855 .sa_family
= ARPHRD_ETHER
}
1857 int associated
= priv
->status
& STATUS_ASSOCIATED
;
1859 /* Kill the RF switch timer */
1860 if (!priv
->stop_rf_kill
) {
1861 priv
->stop_rf_kill
= 1;
1862 cancel_delayed_work(&priv
->rf_kill
);
1865 /* Kill the firmware hang check timer */
1866 if (!priv
->stop_hang_check
) {
1867 priv
->stop_hang_check
= 1;
1868 cancel_delayed_work(&priv
->hang_check
);
1871 /* Kill any pending resets */
1872 if (priv
->status
& STATUS_RESET_PENDING
)
1873 cancel_delayed_work(&priv
->reset_work
);
1875 /* Make sure the interrupt is on so that FW commands will be
1876 * processed correctly */
1877 spin_lock_irqsave(&priv
->low_lock
, flags
);
1878 ipw2100_enable_interrupts(priv
);
1879 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1881 if (ipw2100_hw_stop_adapter(priv
))
1882 printk(KERN_ERR DRV_NAME
": %s: Error stopping adapter.\n",
1883 priv
->net_dev
->name
);
1885 /* Do not disable the interrupt until _after_ we disable
1886 * the adaptor. Otherwise the CARD_DISABLE command will never
1887 * be ack'd by the firmware */
1888 spin_lock_irqsave(&priv
->low_lock
, flags
);
1889 ipw2100_disable_interrupts(priv
);
1890 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1892 pm_qos_update_request(&ipw2100_pm_qos_req
, PM_QOS_DEFAULT_VALUE
);
1894 /* We have to signal any supplicant if we are disassociating */
1896 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
1898 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1899 netif_carrier_off(priv
->net_dev
);
1900 netif_stop_queue(priv
->net_dev
);
1903 /* Called by register_netdev() */
1904 static int ipw2100_net_init(struct net_device
*dev
)
1906 struct ipw2100_priv
*priv
= libipw_priv(dev
);
1907 const struct libipw_geo
*geo
= libipw_get_geo(priv
->ieee
);
1908 struct wireless_dev
*wdev
= &priv
->ieee
->wdev
;
1912 ret
= ipw2100_up(priv
, 1);
1916 memcpy(wdev
->wiphy
->perm_addr
, priv
->mac_addr
, ETH_ALEN
);
1918 /* fill-out priv->ieee->bg_band */
1919 if (geo
->bg_channels
) {
1920 struct ieee80211_supported_band
*bg_band
= &priv
->ieee
->bg_band
;
1922 bg_band
->band
= IEEE80211_BAND_2GHZ
;
1923 bg_band
->n_channels
= geo
->bg_channels
;
1924 bg_band
->channels
= kcalloc(geo
->bg_channels
,
1925 sizeof(struct ieee80211_channel
),
1927 if (!bg_band
->channels
) {
1931 /* translate geo->bg to bg_band.channels */
1932 for (i
= 0; i
< geo
->bg_channels
; i
++) {
1933 bg_band
->channels
[i
].band
= IEEE80211_BAND_2GHZ
;
1934 bg_band
->channels
[i
].center_freq
= geo
->bg
[i
].freq
;
1935 bg_band
->channels
[i
].hw_value
= geo
->bg
[i
].channel
;
1936 bg_band
->channels
[i
].max_power
= geo
->bg
[i
].max_power
;
1937 if (geo
->bg
[i
].flags
& LIBIPW_CH_PASSIVE_ONLY
)
1938 bg_band
->channels
[i
].flags
|=
1939 IEEE80211_CHAN_PASSIVE_SCAN
;
1940 if (geo
->bg
[i
].flags
& LIBIPW_CH_NO_IBSS
)
1941 bg_band
->channels
[i
].flags
|=
1942 IEEE80211_CHAN_NO_IBSS
;
1943 if (geo
->bg
[i
].flags
& LIBIPW_CH_RADAR_DETECT
)
1944 bg_band
->channels
[i
].flags
|=
1945 IEEE80211_CHAN_RADAR
;
1946 /* No equivalent for LIBIPW_CH_80211H_RULES,
1947 LIBIPW_CH_UNIFORM_SPREADING, or
1948 LIBIPW_CH_B_ONLY... */
1950 /* point at bitrate info */
1951 bg_band
->bitrates
= ipw2100_bg_rates
;
1952 bg_band
->n_bitrates
= RATE_COUNT
;
1954 wdev
->wiphy
->bands
[IEEE80211_BAND_2GHZ
] = bg_band
;
1957 set_wiphy_dev(wdev
->wiphy
, &priv
->pci_dev
->dev
);
1958 if (wiphy_register(wdev
->wiphy
)) {
1965 static void ipw2100_reset_adapter(struct work_struct
*work
)
1967 struct ipw2100_priv
*priv
=
1968 container_of(work
, struct ipw2100_priv
, reset_work
.work
);
1969 unsigned long flags
;
1970 union iwreq_data wrqu
= {
1972 .sa_family
= ARPHRD_ETHER
}
1974 int associated
= priv
->status
& STATUS_ASSOCIATED
;
1976 spin_lock_irqsave(&priv
->low_lock
, flags
);
1977 IPW_DEBUG_INFO(": %s: Restarting adapter.\n", priv
->net_dev
->name
);
1979 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1980 priv
->status
|= STATUS_SECURITY_UPDATED
;
1982 /* Force a power cycle even if interface hasn't been opened
1984 cancel_delayed_work(&priv
->reset_work
);
1985 priv
->status
|= STATUS_RESET_PENDING
;
1986 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1988 mutex_lock(&priv
->action_mutex
);
1989 /* stop timed checks so that they don't interfere with reset */
1990 priv
->stop_hang_check
= 1;
1991 cancel_delayed_work(&priv
->hang_check
);
1993 /* We have to signal any supplicant if we are disassociating */
1995 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
1997 ipw2100_up(priv
, 0);
1998 mutex_unlock(&priv
->action_mutex
);
2002 static void isr_indicate_associated(struct ipw2100_priv
*priv
, u32 status
)
2005 #define MAC_ASSOCIATION_READ_DELAY (HZ)
2007 unsigned int len
, essid_len
;
2008 char essid
[IW_ESSID_MAX_SIZE
];
2013 DECLARE_SSID_BUF(ssid
);
2016 * TBD: BSSID is usually 00:00:00:00:00:00 here and not
2017 * an actual MAC of the AP. Seems like FW sets this
2018 * address too late. Read it later and expose through
2019 * /proc or schedule a later task to query and update
2022 essid_len
= IW_ESSID_MAX_SIZE
;
2023 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_SSID
,
2026 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2032 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_CURRENT_TX_RATE
, &txrate
, &len
);
2034 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2040 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_OUR_FREQ
, &chan
, &len
);
2042 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2047 ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
, &bssid
, &len
);
2049 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2053 memcpy(priv
->ieee
->bssid
, bssid
, ETH_ALEN
);
2056 case TX_RATE_1_MBIT
:
2057 txratename
= "1Mbps";
2059 case TX_RATE_2_MBIT
:
2060 txratename
= "2Mbsp";
2062 case TX_RATE_5_5_MBIT
:
2063 txratename
= "5.5Mbps";
2065 case TX_RATE_11_MBIT
:
2066 txratename
= "11Mbps";
2069 IPW_DEBUG_INFO("Unknown rate: %d\n", txrate
);
2070 txratename
= "unknown rate";
2074 IPW_DEBUG_INFO("%s: Associated with '%s' at %s, channel %d (BSSID=%pM)\n",
2075 priv
->net_dev
->name
, print_ssid(ssid
, essid
, essid_len
),
2076 txratename
, chan
, bssid
);
2078 /* now we copy read ssid into dev */
2079 if (!(priv
->config
& CFG_STATIC_ESSID
)) {
2080 priv
->essid_len
= min((u8
) essid_len
, (u8
) IW_ESSID_MAX_SIZE
);
2081 memcpy(priv
->essid
, essid
, priv
->essid_len
);
2083 priv
->channel
= chan
;
2084 memcpy(priv
->bssid
, bssid
, ETH_ALEN
);
2086 priv
->status
|= STATUS_ASSOCIATING
;
2087 priv
->connect_start
= get_seconds();
2089 queue_delayed_work(priv
->workqueue
, &priv
->wx_event_work
, HZ
/ 10);
2092 static int ipw2100_set_essid(struct ipw2100_priv
*priv
, char *essid
,
2093 int length
, int batch_mode
)
2095 int ssid_len
= min(length
, IW_ESSID_MAX_SIZE
);
2096 struct host_command cmd
= {
2097 .host_command
= SSID
,
2098 .host_command_sequence
= 0,
2099 .host_command_length
= ssid_len
2102 DECLARE_SSID_BUF(ssid
);
2104 IPW_DEBUG_HC("SSID: '%s'\n", print_ssid(ssid
, essid
, ssid_len
));
2107 memcpy(cmd
.host_command_parameters
, essid
, ssid_len
);
2110 err
= ipw2100_disable_adapter(priv
);
2115 /* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to
2116 * disable auto association -- so we cheat by setting a bogus SSID */
2117 if (!ssid_len
&& !(priv
->config
& CFG_ASSOCIATE
)) {
2119 u8
*bogus
= (u8
*) cmd
.host_command_parameters
;
2120 for (i
= 0; i
< IW_ESSID_MAX_SIZE
; i
++)
2121 bogus
[i
] = 0x18 + i
;
2122 cmd
.host_command_length
= IW_ESSID_MAX_SIZE
;
2125 /* NOTE: We always send the SSID command even if the provided ESSID is
2126 * the same as what we currently think is set. */
2128 err
= ipw2100_hw_send_command(priv
, &cmd
);
2130 memset(priv
->essid
+ ssid_len
, 0, IW_ESSID_MAX_SIZE
- ssid_len
);
2131 memcpy(priv
->essid
, essid
, ssid_len
);
2132 priv
->essid_len
= ssid_len
;
2136 if (ipw2100_enable_adapter(priv
))
2143 static void isr_indicate_association_lost(struct ipw2100_priv
*priv
, u32 status
)
2145 DECLARE_SSID_BUF(ssid
);
2147 IPW_DEBUG(IPW_DL_NOTIF
| IPW_DL_STATE
| IPW_DL_ASSOC
,
2148 "disassociated: '%s' %pM\n",
2149 print_ssid(ssid
, priv
->essid
, priv
->essid_len
),
2152 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
2154 if (priv
->status
& STATUS_STOPPING
) {
2155 IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n");
2159 memset(priv
->bssid
, 0, ETH_ALEN
);
2160 memset(priv
->ieee
->bssid
, 0, ETH_ALEN
);
2162 netif_carrier_off(priv
->net_dev
);
2163 netif_stop_queue(priv
->net_dev
);
2165 if (!(priv
->status
& STATUS_RUNNING
))
2168 if (priv
->status
& STATUS_SECURITY_UPDATED
)
2169 queue_delayed_work(priv
->workqueue
, &priv
->security_work
, 0);
2171 queue_delayed_work(priv
->workqueue
, &priv
->wx_event_work
, 0);
2174 static void isr_indicate_rf_kill(struct ipw2100_priv
*priv
, u32 status
)
2176 IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n",
2177 priv
->net_dev
->name
);
2179 /* RF_KILL is now enabled (else we wouldn't be here) */
2180 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, true);
2181 priv
->status
|= STATUS_RF_KILL_HW
;
2183 /* Make sure the RF Kill check timer is running */
2184 priv
->stop_rf_kill
= 0;
2185 cancel_delayed_work(&priv
->rf_kill
);
2186 queue_delayed_work(priv
->workqueue
, &priv
->rf_kill
,
2187 round_jiffies_relative(HZ
));
2190 static void send_scan_event(void *data
)
2192 struct ipw2100_priv
*priv
= data
;
2193 union iwreq_data wrqu
;
2195 wrqu
.data
.length
= 0;
2196 wrqu
.data
.flags
= 0;
2197 wireless_send_event(priv
->net_dev
, SIOCGIWSCAN
, &wrqu
, NULL
);
2200 static void ipw2100_scan_event_later(struct work_struct
*work
)
2202 send_scan_event(container_of(work
, struct ipw2100_priv
,
2203 scan_event_later
.work
));
2206 static void ipw2100_scan_event_now(struct work_struct
*work
)
2208 send_scan_event(container_of(work
, struct ipw2100_priv
,
2212 static void isr_scan_complete(struct ipw2100_priv
*priv
, u32 status
)
2214 IPW_DEBUG_SCAN("scan complete\n");
2215 /* Age the scan results... */
2216 priv
->ieee
->scans
++;
2217 priv
->status
&= ~STATUS_SCANNING
;
2219 /* Only userspace-requested scan completion events go out immediately */
2220 if (!priv
->user_requested_scan
) {
2221 if (!delayed_work_pending(&priv
->scan_event_later
))
2222 queue_delayed_work(priv
->workqueue
,
2223 &priv
->scan_event_later
,
2224 round_jiffies_relative(msecs_to_jiffies(4000)));
2226 priv
->user_requested_scan
= 0;
2227 cancel_delayed_work(&priv
->scan_event_later
);
2228 queue_work(priv
->workqueue
, &priv
->scan_event_now
);
2232 #ifdef CONFIG_IPW2100_DEBUG
2233 #define IPW2100_HANDLER(v, f) { v, f, # v }
2234 struct ipw2100_status_indicator
{
2236 void (*cb
) (struct ipw2100_priv
* priv
, u32 status
);
2240 #define IPW2100_HANDLER(v, f) { v, f }
2241 struct ipw2100_status_indicator
{
2243 void (*cb
) (struct ipw2100_priv
* priv
, u32 status
);
2245 #endif /* CONFIG_IPW2100_DEBUG */
2247 static void isr_indicate_scanning(struct ipw2100_priv
*priv
, u32 status
)
2249 IPW_DEBUG_SCAN("Scanning...\n");
2250 priv
->status
|= STATUS_SCANNING
;
2253 static const struct ipw2100_status_indicator status_handlers
[] = {
2254 IPW2100_HANDLER(IPW_STATE_INITIALIZED
, NULL
),
2255 IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND
, NULL
),
2256 IPW2100_HANDLER(IPW_STATE_ASSOCIATED
, isr_indicate_associated
),
2257 IPW2100_HANDLER(IPW_STATE_ASSN_LOST
, isr_indicate_association_lost
),
2258 IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED
, NULL
),
2259 IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE
, isr_scan_complete
),
2260 IPW2100_HANDLER(IPW_STATE_ENTERED_PSP
, NULL
),
2261 IPW2100_HANDLER(IPW_STATE_LEFT_PSP
, NULL
),
2262 IPW2100_HANDLER(IPW_STATE_RF_KILL
, isr_indicate_rf_kill
),
2263 IPW2100_HANDLER(IPW_STATE_DISABLED
, NULL
),
2264 IPW2100_HANDLER(IPW_STATE_POWER_DOWN
, NULL
),
2265 IPW2100_HANDLER(IPW_STATE_SCANNING
, isr_indicate_scanning
),
2266 IPW2100_HANDLER(-1, NULL
)
2269 static void isr_status_change(struct ipw2100_priv
*priv
, int status
)
2273 if (status
== IPW_STATE_SCANNING
&&
2274 priv
->status
& STATUS_ASSOCIATED
&&
2275 !(priv
->status
& STATUS_SCANNING
)) {
2276 IPW_DEBUG_INFO("Scan detected while associated, with "
2277 "no scan request. Restarting firmware.\n");
2279 /* Wake up any sleeping jobs */
2280 schedule_reset(priv
);
2283 for (i
= 0; status_handlers
[i
].status
!= -1; i
++) {
2284 if (status
== status_handlers
[i
].status
) {
2285 IPW_DEBUG_NOTIF("Status change: %s\n",
2286 status_handlers
[i
].name
);
2287 if (status_handlers
[i
].cb
)
2288 status_handlers
[i
].cb(priv
, status
);
2289 priv
->wstats
.status
= status
;
2294 IPW_DEBUG_NOTIF("unknown status received: %04x\n", status
);
2297 static void isr_rx_complete_command(struct ipw2100_priv
*priv
,
2298 struct ipw2100_cmd_header
*cmd
)
2300 #ifdef CONFIG_IPW2100_DEBUG
2301 if (cmd
->host_command_reg
< ARRAY_SIZE(command_types
)) {
2302 IPW_DEBUG_HC("Command completed '%s (%d)'\n",
2303 command_types
[cmd
->host_command_reg
],
2304 cmd
->host_command_reg
);
2307 if (cmd
->host_command_reg
== HOST_COMPLETE
)
2308 priv
->status
|= STATUS_ENABLED
;
2310 if (cmd
->host_command_reg
== CARD_DISABLE
)
2311 priv
->status
&= ~STATUS_ENABLED
;
2313 priv
->status
&= ~STATUS_CMD_ACTIVE
;
2315 wake_up_interruptible(&priv
->wait_command_queue
);
2318 #ifdef CONFIG_IPW2100_DEBUG
2319 static const char *frame_types
[] = {
2320 "COMMAND_STATUS_VAL",
2321 "STATUS_CHANGE_VAL",
2324 "HOST_NOTIFICATION_VAL"
2328 static int ipw2100_alloc_skb(struct ipw2100_priv
*priv
,
2329 struct ipw2100_rx_packet
*packet
)
2331 packet
->skb
= dev_alloc_skb(sizeof(struct ipw2100_rx
));
2335 packet
->rxp
= (struct ipw2100_rx
*)packet
->skb
->data
;
2336 packet
->dma_addr
= pci_map_single(priv
->pci_dev
, packet
->skb
->data
,
2337 sizeof(struct ipw2100_rx
),
2338 PCI_DMA_FROMDEVICE
);
2339 /* NOTE: pci_map_single does not return an error code, and 0 is a valid
2345 #define SEARCH_ERROR 0xffffffff
2346 #define SEARCH_FAIL 0xfffffffe
2347 #define SEARCH_SUCCESS 0xfffffff0
2348 #define SEARCH_DISCARD 0
2349 #define SEARCH_SNAPSHOT 1
2351 #define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff))
2352 static void ipw2100_snapshot_free(struct ipw2100_priv
*priv
)
2355 if (!priv
->snapshot
[0])
2357 for (i
= 0; i
< 0x30; i
++)
2358 kfree(priv
->snapshot
[i
]);
2359 priv
->snapshot
[0] = NULL
;
2362 #ifdef IPW2100_DEBUG_C3
2363 static int ipw2100_snapshot_alloc(struct ipw2100_priv
*priv
)
2366 if (priv
->snapshot
[0])
2368 for (i
= 0; i
< 0x30; i
++) {
2369 priv
->snapshot
[i
] = kmalloc(0x1000, GFP_ATOMIC
);
2370 if (!priv
->snapshot
[i
]) {
2371 IPW_DEBUG_INFO("%s: Error allocating snapshot "
2372 "buffer %d\n", priv
->net_dev
->name
, i
);
2374 kfree(priv
->snapshot
[--i
]);
2375 priv
->snapshot
[0] = NULL
;
2383 static u32
ipw2100_match_buf(struct ipw2100_priv
*priv
, u8
* in_buf
,
2384 size_t len
, int mode
)
2392 if (mode
== SEARCH_SNAPSHOT
) {
2393 if (!ipw2100_snapshot_alloc(priv
))
2394 mode
= SEARCH_DISCARD
;
2397 for (ret
= SEARCH_FAIL
, i
= 0; i
< 0x30000; i
+= 4) {
2398 read_nic_dword(priv
->net_dev
, i
, &tmp
);
2399 if (mode
== SEARCH_SNAPSHOT
)
2400 *(u32
*) SNAPSHOT_ADDR(i
) = tmp
;
2401 if (ret
== SEARCH_FAIL
) {
2403 for (j
= 0; j
< 4; j
++) {
2412 if ((s
- in_buf
) == len
)
2413 ret
= (i
+ j
) - len
+ 1;
2415 } else if (mode
== SEARCH_DISCARD
)
2425 * 0) Disconnect the SKB from the firmware (just unmap)
2426 * 1) Pack the ETH header into the SKB
2427 * 2) Pass the SKB to the network stack
2429 * When packet is provided by the firmware, it contains the following:
2434 * The size of the constructed ethernet
2437 #ifdef IPW2100_RX_DEBUG
2438 static u8 packet_data
[IPW_RX_NIC_BUFFER_LENGTH
];
2441 static void ipw2100_corruption_detected(struct ipw2100_priv
*priv
, int i
)
2443 #ifdef IPW2100_DEBUG_C3
2444 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2449 IPW_DEBUG_INFO(": PCI latency error detected at 0x%04zX.\n",
2450 i
* sizeof(struct ipw2100_status
));
2452 #ifdef IPW2100_DEBUG_C3
2453 /* Halt the firmware so we can get a good image */
2454 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
2455 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
2458 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY
);
2459 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
2461 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
2465 match
= ipw2100_match_buf(priv
, (u8
*) status
,
2466 sizeof(struct ipw2100_status
),
2468 if (match
< SEARCH_SUCCESS
)
2469 IPW_DEBUG_INFO("%s: DMA status match in Firmware at "
2470 "offset 0x%06X, length %d:\n",
2471 priv
->net_dev
->name
, match
,
2472 sizeof(struct ipw2100_status
));
2474 IPW_DEBUG_INFO("%s: No DMA status match in "
2475 "Firmware.\n", priv
->net_dev
->name
);
2477 printk_buf((u8
*) priv
->status_queue
.drv
,
2478 sizeof(struct ipw2100_status
) * RX_QUEUE_LENGTH
);
2481 priv
->fatal_error
= IPW2100_ERR_C3_CORRUPTION
;
2482 priv
->net_dev
->stats
.rx_errors
++;
2483 schedule_reset(priv
);
2486 static void isr_rx(struct ipw2100_priv
*priv
, int i
,
2487 struct libipw_rx_stats
*stats
)
2489 struct net_device
*dev
= priv
->net_dev
;
2490 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2491 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
2493 IPW_DEBUG_RX("Handler...\n");
2495 if (unlikely(status
->frame_size
> skb_tailroom(packet
->skb
))) {
2496 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2499 status
->frame_size
, skb_tailroom(packet
->skb
));
2500 dev
->stats
.rx_errors
++;
2504 if (unlikely(!netif_running(dev
))) {
2505 dev
->stats
.rx_errors
++;
2506 priv
->wstats
.discard
.misc
++;
2507 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2511 if (unlikely(priv
->ieee
->iw_mode
!= IW_MODE_MONITOR
&&
2512 !(priv
->status
& STATUS_ASSOCIATED
))) {
2513 IPW_DEBUG_DROP("Dropping packet while not associated.\n");
2514 priv
->wstats
.discard
.misc
++;
2518 pci_unmap_single(priv
->pci_dev
,
2520 sizeof(struct ipw2100_rx
), PCI_DMA_FROMDEVICE
);
2522 skb_put(packet
->skb
, status
->frame_size
);
2524 #ifdef IPW2100_RX_DEBUG
2525 /* Make a copy of the frame so we can dump it to the logs if
2526 * libipw_rx fails */
2527 skb_copy_from_linear_data(packet
->skb
, packet_data
,
2528 min_t(u32
, status
->frame_size
,
2529 IPW_RX_NIC_BUFFER_LENGTH
));
2532 if (!libipw_rx(priv
->ieee
, packet
->skb
, stats
)) {
2533 #ifdef IPW2100_RX_DEBUG
2534 IPW_DEBUG_DROP("%s: Non consumed packet:\n",
2536 printk_buf(IPW_DL_DROP
, packet_data
, status
->frame_size
);
2538 dev
->stats
.rx_errors
++;
2540 /* libipw_rx failed, so it didn't free the SKB */
2541 dev_kfree_skb_any(packet
->skb
);
2545 /* We need to allocate a new SKB and attach it to the RDB. */
2546 if (unlikely(ipw2100_alloc_skb(priv
, packet
))) {
2547 printk(KERN_WARNING DRV_NAME
": "
2548 "%s: Unable to allocate SKB onto RBD ring - disabling "
2549 "adapter.\n", dev
->name
);
2550 /* TODO: schedule adapter shutdown */
2551 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2554 /* Update the RDB entry */
2555 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
2558 #ifdef CONFIG_IPW2100_MONITOR
2560 static void isr_rx_monitor(struct ipw2100_priv
*priv
, int i
,
2561 struct libipw_rx_stats
*stats
)
2563 struct net_device
*dev
= priv
->net_dev
;
2564 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2565 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
2567 /* Magic struct that slots into the radiotap header -- no reason
2568 * to build this manually element by element, we can write it much
2569 * more efficiently than we can parse it. ORDER MATTERS HERE */
2571 struct ieee80211_radiotap_header rt_hdr
;
2572 s8 rt_dbmsignal
; /* signal in dbM, kluged to signed */
2575 IPW_DEBUG_RX("Handler...\n");
2577 if (unlikely(status
->frame_size
> skb_tailroom(packet
->skb
) -
2578 sizeof(struct ipw_rt_hdr
))) {
2579 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2583 skb_tailroom(packet
->skb
));
2584 dev
->stats
.rx_errors
++;
2588 if (unlikely(!netif_running(dev
))) {
2589 dev
->stats
.rx_errors
++;
2590 priv
->wstats
.discard
.misc
++;
2591 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2595 if (unlikely(priv
->config
& CFG_CRC_CHECK
&&
2596 status
->flags
& IPW_STATUS_FLAG_CRC_ERROR
)) {
2597 IPW_DEBUG_RX("CRC error in packet. Dropping.\n");
2598 dev
->stats
.rx_errors
++;
2602 pci_unmap_single(priv
->pci_dev
, packet
->dma_addr
,
2603 sizeof(struct ipw2100_rx
), PCI_DMA_FROMDEVICE
);
2604 memmove(packet
->skb
->data
+ sizeof(struct ipw_rt_hdr
),
2605 packet
->skb
->data
, status
->frame_size
);
2607 ipw_rt
= (struct ipw_rt_hdr
*) packet
->skb
->data
;
2609 ipw_rt
->rt_hdr
.it_version
= PKTHDR_RADIOTAP_VERSION
;
2610 ipw_rt
->rt_hdr
.it_pad
= 0; /* always good to zero */
2611 ipw_rt
->rt_hdr
.it_len
= cpu_to_le16(sizeof(struct ipw_rt_hdr
)); /* total hdr+data */
2613 ipw_rt
->rt_hdr
.it_present
= cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL
);
2615 ipw_rt
->rt_dbmsignal
= status
->rssi
+ IPW2100_RSSI_TO_DBM
;
2617 skb_put(packet
->skb
, status
->frame_size
+ sizeof(struct ipw_rt_hdr
));
2619 if (!libipw_rx(priv
->ieee
, packet
->skb
, stats
)) {
2620 dev
->stats
.rx_errors
++;
2622 /* libipw_rx failed, so it didn't free the SKB */
2623 dev_kfree_skb_any(packet
->skb
);
2627 /* We need to allocate a new SKB and attach it to the RDB. */
2628 if (unlikely(ipw2100_alloc_skb(priv
, packet
))) {
2630 "%s: Unable to allocate SKB onto RBD ring - disabling "
2631 "adapter.\n", dev
->name
);
2632 /* TODO: schedule adapter shutdown */
2633 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2636 /* Update the RDB entry */
2637 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
2642 static int ipw2100_corruption_check(struct ipw2100_priv
*priv
, int i
)
2644 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2645 struct ipw2100_rx
*u
= priv
->rx_buffers
[i
].rxp
;
2646 u16 frame_type
= status
->status_fields
& STATUS_TYPE_MASK
;
2648 switch (frame_type
) {
2649 case COMMAND_STATUS_VAL
:
2650 return (status
->frame_size
!= sizeof(u
->rx_data
.command
));
2651 case STATUS_CHANGE_VAL
:
2652 return (status
->frame_size
!= sizeof(u
->rx_data
.status
));
2653 case HOST_NOTIFICATION_VAL
:
2654 return (status
->frame_size
< sizeof(u
->rx_data
.notification
));
2655 case P80211_DATA_VAL
:
2656 case P8023_DATA_VAL
:
2657 #ifdef CONFIG_IPW2100_MONITOR
2660 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u
->rx_data
.header
.frame_ctl
))) {
2661 case IEEE80211_FTYPE_MGMT
:
2662 case IEEE80211_FTYPE_CTL
:
2664 case IEEE80211_FTYPE_DATA
:
2665 return (status
->frame_size
>
2666 IPW_MAX_802_11_PAYLOAD_LENGTH
);
2675 * ipw2100 interrupts are disabled at this point, and the ISR
2676 * is the only code that calls this method. So, we do not need
2677 * to play with any locks.
2679 * RX Queue works as follows:
2681 * Read index - firmware places packet in entry identified by the
2682 * Read index and advances Read index. In this manner,
2683 * Read index will always point to the next packet to
2684 * be filled--but not yet valid.
2686 * Write index - driver fills this entry with an unused RBD entry.
2687 * This entry has not filled by the firmware yet.
2689 * In between the W and R indexes are the RBDs that have been received
2690 * but not yet processed.
2692 * The process of handling packets will start at WRITE + 1 and advance
2693 * until it reaches the READ index.
2695 * The WRITE index is cached in the variable 'priv->rx_queue.next'.
2698 static void __ipw2100_rx_process(struct ipw2100_priv
*priv
)
2700 struct ipw2100_bd_queue
*rxq
= &priv
->rx_queue
;
2701 struct ipw2100_status_queue
*sq
= &priv
->status_queue
;
2702 struct ipw2100_rx_packet
*packet
;
2705 struct ipw2100_rx
*u
;
2706 struct libipw_rx_stats stats
= {
2707 .mac_time
= jiffies
,
2710 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_READ_INDEX
, &r
);
2711 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
, &w
);
2713 if (r
>= rxq
->entries
) {
2714 IPW_DEBUG_RX("exit - bad read index\n");
2718 i
= (rxq
->next
+ 1) % rxq
->entries
;
2721 /* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n",
2722 r, rxq->next, i); */
2724 packet
= &priv
->rx_buffers
[i
];
2726 /* Sync the DMA for the RX buffer so CPU is sure to get
2727 * the correct values */
2728 pci_dma_sync_single_for_cpu(priv
->pci_dev
, packet
->dma_addr
,
2729 sizeof(struct ipw2100_rx
),
2730 PCI_DMA_FROMDEVICE
);
2732 if (unlikely(ipw2100_corruption_check(priv
, i
))) {
2733 ipw2100_corruption_detected(priv
, i
);
2738 frame_type
= sq
->drv
[i
].status_fields
& STATUS_TYPE_MASK
;
2739 stats
.rssi
= sq
->drv
[i
].rssi
+ IPW2100_RSSI_TO_DBM
;
2740 stats
.len
= sq
->drv
[i
].frame_size
;
2743 if (stats
.rssi
!= 0)
2744 stats
.mask
|= LIBIPW_STATMASK_RSSI
;
2745 stats
.freq
= LIBIPW_24GHZ_BAND
;
2747 IPW_DEBUG_RX("%s: '%s' frame type received (%d).\n",
2748 priv
->net_dev
->name
, frame_types
[frame_type
],
2751 switch (frame_type
) {
2752 case COMMAND_STATUS_VAL
:
2753 /* Reset Rx watchdog */
2754 isr_rx_complete_command(priv
, &u
->rx_data
.command
);
2757 case STATUS_CHANGE_VAL
:
2758 isr_status_change(priv
, u
->rx_data
.status
);
2761 case P80211_DATA_VAL
:
2762 case P8023_DATA_VAL
:
2763 #ifdef CONFIG_IPW2100_MONITOR
2764 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
2765 isr_rx_monitor(priv
, i
, &stats
);
2769 if (stats
.len
< sizeof(struct libipw_hdr_3addr
))
2771 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u
->rx_data
.header
.frame_ctl
))) {
2772 case IEEE80211_FTYPE_MGMT
:
2773 libipw_rx_mgt(priv
->ieee
,
2774 &u
->rx_data
.header
, &stats
);
2777 case IEEE80211_FTYPE_CTL
:
2780 case IEEE80211_FTYPE_DATA
:
2781 isr_rx(priv
, i
, &stats
);
2789 /* clear status field associated with this RBD */
2790 rxq
->drv
[i
].status
.info
.field
= 0;
2792 i
= (i
+ 1) % rxq
->entries
;
2796 /* backtrack one entry, wrapping to end if at 0 */
2797 rxq
->next
= (i
? i
: rxq
->entries
) - 1;
2799 write_register(priv
->net_dev
,
2800 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
, rxq
->next
);
2805 * __ipw2100_tx_process
2807 * This routine will determine whether the next packet on
2808 * the fw_pend_list has been processed by the firmware yet.
2810 * If not, then it does nothing and returns.
2812 * If so, then it removes the item from the fw_pend_list, frees
2813 * any associated storage, and places the item back on the
2814 * free list of its source (either msg_free_list or tx_free_list)
2816 * TX Queue works as follows:
2818 * Read index - points to the next TBD that the firmware will
2819 * process. The firmware will read the data, and once
2820 * done processing, it will advance the Read index.
2822 * Write index - driver fills this entry with an constructed TBD
2823 * entry. The Write index is not advanced until the
2824 * packet has been configured.
2826 * In between the W and R indexes are the TBDs that have NOT been
2827 * processed. Lagging behind the R index are packets that have
2828 * been processed but have not been freed by the driver.
2830 * In order to free old storage, an internal index will be maintained
2831 * that points to the next packet to be freed. When all used
2832 * packets have been freed, the oldest index will be the same as the
2833 * firmware's read index.
2835 * The OLDEST index is cached in the variable 'priv->tx_queue.oldest'
2837 * Because the TBD structure can not contain arbitrary data, the
2838 * driver must keep an internal queue of cached allocations such that
2839 * it can put that data back into the tx_free_list and msg_free_list
2840 * for use by future command and data packets.
2843 static int __ipw2100_tx_process(struct ipw2100_priv
*priv
)
2845 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
2846 struct ipw2100_bd
*tbd
;
2847 struct list_head
*element
;
2848 struct ipw2100_tx_packet
*packet
;
2849 int descriptors_used
;
2851 u32 r
, w
, frag_num
= 0;
2853 if (list_empty(&priv
->fw_pend_list
))
2856 element
= priv
->fw_pend_list
.next
;
2858 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
2859 tbd
= &txq
->drv
[packet
->index
];
2861 /* Determine how many TBD entries must be finished... */
2862 switch (packet
->type
) {
2864 /* COMMAND uses only one slot; don't advance */
2865 descriptors_used
= 1;
2870 /* DATA uses two slots; advance and loop position. */
2871 descriptors_used
= tbd
->num_fragments
;
2872 frag_num
= tbd
->num_fragments
- 1;
2873 e
= txq
->oldest
+ frag_num
;
2878 printk(KERN_WARNING DRV_NAME
": %s: Bad fw_pend_list entry!\n",
2879 priv
->net_dev
->name
);
2883 /* if the last TBD is not done by NIC yet, then packet is
2884 * not ready to be released.
2887 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX
,
2889 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
2892 printk(KERN_WARNING DRV_NAME
": %s: write index mismatch\n",
2893 priv
->net_dev
->name
);
2896 * txq->next is the index of the last packet written txq->oldest is
2897 * the index of the r is the index of the next packet to be read by
2902 * Quick graphic to help you visualize the following
2903 * if / else statement
2905 * ===>| s---->|===============
2907 * | a | b | c | d | e | f | g | h | i | j | k | l
2911 * w - updated by driver
2912 * r - updated by firmware
2913 * s - start of oldest BD entry (txq->oldest)
2914 * e - end of oldest BD entry
2917 if (!((r
<= w
&& (e
< r
|| e
>= w
)) || (e
< r
&& e
>= w
))) {
2918 IPW_DEBUG_TX("exit - no processed packets ready to release.\n");
2923 DEC_STAT(&priv
->fw_pend_stat
);
2925 #ifdef CONFIG_IPW2100_DEBUG
2928 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i
,
2930 (u32
) (txq
->nic
+ i
* sizeof(struct ipw2100_bd
)),
2931 txq
->drv
[i
].host_addr
, txq
->drv
[i
].buf_length
);
2933 if (packet
->type
== DATA
) {
2934 i
= (i
+ 1) % txq
->entries
;
2936 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i
,
2938 (u32
) (txq
->nic
+ i
*
2939 sizeof(struct ipw2100_bd
)),
2940 (u32
) txq
->drv
[i
].host_addr
,
2941 txq
->drv
[i
].buf_length
);
2946 switch (packet
->type
) {
2948 if (txq
->drv
[txq
->oldest
].status
.info
.fields
.txType
!= 0)
2949 printk(KERN_WARNING DRV_NAME
": %s: Queue mismatch. "
2950 "Expecting DATA TBD but pulled "
2951 "something else: ids %d=%d.\n",
2952 priv
->net_dev
->name
, txq
->oldest
, packet
->index
);
2954 /* DATA packet; we have to unmap and free the SKB */
2955 for (i
= 0; i
< frag_num
; i
++) {
2956 tbd
= &txq
->drv
[(packet
->index
+ 1 + i
) % txq
->entries
];
2958 IPW_DEBUG_TX("TX%d P=%08x L=%d\n",
2959 (packet
->index
+ 1 + i
) % txq
->entries
,
2960 tbd
->host_addr
, tbd
->buf_length
);
2962 pci_unmap_single(priv
->pci_dev
,
2964 tbd
->buf_length
, PCI_DMA_TODEVICE
);
2967 libipw_txb_free(packet
->info
.d_struct
.txb
);
2968 packet
->info
.d_struct
.txb
= NULL
;
2970 list_add_tail(element
, &priv
->tx_free_list
);
2971 INC_STAT(&priv
->tx_free_stat
);
2973 /* We have a free slot in the Tx queue, so wake up the
2974 * transmit layer if it is stopped. */
2975 if (priv
->status
& STATUS_ASSOCIATED
)
2976 netif_wake_queue(priv
->net_dev
);
2978 /* A packet was processed by the hardware, so update the
2980 priv
->net_dev
->trans_start
= jiffies
;
2985 if (txq
->drv
[txq
->oldest
].status
.info
.fields
.txType
!= 1)
2986 printk(KERN_WARNING DRV_NAME
": %s: Queue mismatch. "
2987 "Expecting COMMAND TBD but pulled "
2988 "something else: ids %d=%d.\n",
2989 priv
->net_dev
->name
, txq
->oldest
, packet
->index
);
2991 #ifdef CONFIG_IPW2100_DEBUG
2992 if (packet
->info
.c_struct
.cmd
->host_command_reg
<
2993 ARRAY_SIZE(command_types
))
2994 IPW_DEBUG_TX("Command '%s (%d)' processed: %d.\n",
2995 command_types
[packet
->info
.c_struct
.cmd
->
2997 packet
->info
.c_struct
.cmd
->
2999 packet
->info
.c_struct
.cmd
->cmd_status_reg
);
3002 list_add_tail(element
, &priv
->msg_free_list
);
3003 INC_STAT(&priv
->msg_free_stat
);
3007 /* advance oldest used TBD pointer to start of next entry */
3008 txq
->oldest
= (e
+ 1) % txq
->entries
;
3009 /* increase available TBDs number */
3010 txq
->available
+= descriptors_used
;
3011 SET_STAT(&priv
->txq_stat
, txq
->available
);
3013 IPW_DEBUG_TX("packet latency (send to process) %ld jiffies\n",
3014 jiffies
- packet
->jiffy_start
);
3016 return (!list_empty(&priv
->fw_pend_list
));
3019 static inline void __ipw2100_tx_complete(struct ipw2100_priv
*priv
)
3023 while (__ipw2100_tx_process(priv
) && i
< 200)
3027 printk(KERN_WARNING DRV_NAME
": "
3028 "%s: Driver is running slow (%d iters).\n",
3029 priv
->net_dev
->name
, i
);
3033 static void ipw2100_tx_send_commands(struct ipw2100_priv
*priv
)
3035 struct list_head
*element
;
3036 struct ipw2100_tx_packet
*packet
;
3037 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
3038 struct ipw2100_bd
*tbd
;
3039 int next
= txq
->next
;
3041 while (!list_empty(&priv
->msg_pend_list
)) {
3042 /* if there isn't enough space in TBD queue, then
3043 * don't stuff a new one in.
3044 * NOTE: 3 are needed as a command will take one,
3045 * and there is a minimum of 2 that must be
3046 * maintained between the r and w indexes
3048 if (txq
->available
<= 3) {
3049 IPW_DEBUG_TX("no room in tx_queue\n");
3053 element
= priv
->msg_pend_list
.next
;
3055 DEC_STAT(&priv
->msg_pend_stat
);
3057 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3059 IPW_DEBUG_TX("using TBD at virt=%p, phys=%04X\n",
3060 &txq
->drv
[txq
->next
],
3061 (u32
) (txq
->nic
+ txq
->next
*
3062 sizeof(struct ipw2100_bd
)));
3064 packet
->index
= txq
->next
;
3066 tbd
= &txq
->drv
[txq
->next
];
3068 /* initialize TBD */
3069 tbd
->host_addr
= packet
->info
.c_struct
.cmd_phys
;
3070 tbd
->buf_length
= sizeof(struct ipw2100_cmd_header
);
3071 /* not marking number of fragments causes problems
3072 * with f/w debug version */
3073 tbd
->num_fragments
= 1;
3074 tbd
->status
.info
.field
=
3075 IPW_BD_STATUS_TX_FRAME_COMMAND
|
3076 IPW_BD_STATUS_TX_INTERRUPT_ENABLE
;
3078 /* update TBD queue counters */
3080 txq
->next
%= txq
->entries
;
3082 DEC_STAT(&priv
->txq_stat
);
3084 list_add_tail(element
, &priv
->fw_pend_list
);
3085 INC_STAT(&priv
->fw_pend_stat
);
3088 if (txq
->next
!= next
) {
3089 /* kick off the DMA by notifying firmware the
3090 * write index has moved; make sure TBD stores are sync'd */
3092 write_register(priv
->net_dev
,
3093 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
3099 * ipw2100_tx_send_data
3102 static void ipw2100_tx_send_data(struct ipw2100_priv
*priv
)
3104 struct list_head
*element
;
3105 struct ipw2100_tx_packet
*packet
;
3106 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
3107 struct ipw2100_bd
*tbd
;
3108 int next
= txq
->next
;
3110 struct ipw2100_data_header
*ipw_hdr
;
3111 struct libipw_hdr_3addr
*hdr
;
3113 while (!list_empty(&priv
->tx_pend_list
)) {
3114 /* if there isn't enough space in TBD queue, then
3115 * don't stuff a new one in.
3116 * NOTE: 4 are needed as a data will take two,
3117 * and there is a minimum of 2 that must be
3118 * maintained between the r and w indexes
3120 element
= priv
->tx_pend_list
.next
;
3121 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3123 if (unlikely(1 + packet
->info
.d_struct
.txb
->nr_frags
>
3125 /* TODO: Support merging buffers if more than
3126 * IPW_MAX_BDS are used */
3127 IPW_DEBUG_INFO("%s: Maximum BD threshold exceeded. "
3128 "Increase fragmentation level.\n",
3129 priv
->net_dev
->name
);
3132 if (txq
->available
<= 3 + packet
->info
.d_struct
.txb
->nr_frags
) {
3133 IPW_DEBUG_TX("no room in tx_queue\n");
3138 DEC_STAT(&priv
->tx_pend_stat
);
3140 tbd
= &txq
->drv
[txq
->next
];
3142 packet
->index
= txq
->next
;
3144 ipw_hdr
= packet
->info
.d_struct
.data
;
3145 hdr
= (struct libipw_hdr_3addr
*)packet
->info
.d_struct
.txb
->
3148 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
) {
3149 /* To DS: Addr1 = BSSID, Addr2 = SA,
3151 memcpy(ipw_hdr
->src_addr
, hdr
->addr2
, ETH_ALEN
);
3152 memcpy(ipw_hdr
->dst_addr
, hdr
->addr3
, ETH_ALEN
);
3153 } else if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
3154 /* not From/To DS: Addr1 = DA, Addr2 = SA,
3156 memcpy(ipw_hdr
->src_addr
, hdr
->addr2
, ETH_ALEN
);
3157 memcpy(ipw_hdr
->dst_addr
, hdr
->addr1
, ETH_ALEN
);
3160 ipw_hdr
->host_command_reg
= SEND
;
3161 ipw_hdr
->host_command_reg1
= 0;
3163 /* For now we only support host based encryption */
3164 ipw_hdr
->needs_encryption
= 0;
3165 ipw_hdr
->encrypted
= packet
->info
.d_struct
.txb
->encrypted
;
3166 if (packet
->info
.d_struct
.txb
->nr_frags
> 1)
3167 ipw_hdr
->fragment_size
=
3168 packet
->info
.d_struct
.txb
->frag_size
-
3171 ipw_hdr
->fragment_size
= 0;
3173 tbd
->host_addr
= packet
->info
.d_struct
.data_phys
;
3174 tbd
->buf_length
= sizeof(struct ipw2100_data_header
);
3175 tbd
->num_fragments
= 1 + packet
->info
.d_struct
.txb
->nr_frags
;
3176 tbd
->status
.info
.field
=
3177 IPW_BD_STATUS_TX_FRAME_802_3
|
3178 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT
;
3180 txq
->next
%= txq
->entries
;
3182 IPW_DEBUG_TX("data header tbd TX%d P=%08x L=%d\n",
3183 packet
->index
, tbd
->host_addr
, tbd
->buf_length
);
3184 #ifdef CONFIG_IPW2100_DEBUG
3185 if (packet
->info
.d_struct
.txb
->nr_frags
> 1)
3186 IPW_DEBUG_FRAG("fragment Tx: %d frames\n",
3187 packet
->info
.d_struct
.txb
->nr_frags
);
3190 for (i
= 0; i
< packet
->info
.d_struct
.txb
->nr_frags
; i
++) {
3191 tbd
= &txq
->drv
[txq
->next
];
3192 if (i
== packet
->info
.d_struct
.txb
->nr_frags
- 1)
3193 tbd
->status
.info
.field
=
3194 IPW_BD_STATUS_TX_FRAME_802_3
|
3195 IPW_BD_STATUS_TX_INTERRUPT_ENABLE
;
3197 tbd
->status
.info
.field
=
3198 IPW_BD_STATUS_TX_FRAME_802_3
|
3199 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT
;
3201 tbd
->buf_length
= packet
->info
.d_struct
.txb
->
3202 fragments
[i
]->len
- LIBIPW_3ADDR_LEN
;
3204 tbd
->host_addr
= pci_map_single(priv
->pci_dev
,
3205 packet
->info
.d_struct
.
3212 IPW_DEBUG_TX("data frag tbd TX%d P=%08x L=%d\n",
3213 txq
->next
, tbd
->host_addr
,
3216 pci_dma_sync_single_for_device(priv
->pci_dev
,
3222 txq
->next
%= txq
->entries
;
3225 txq
->available
-= 1 + packet
->info
.d_struct
.txb
->nr_frags
;
3226 SET_STAT(&priv
->txq_stat
, txq
->available
);
3228 list_add_tail(element
, &priv
->fw_pend_list
);
3229 INC_STAT(&priv
->fw_pend_stat
);
3232 if (txq
->next
!= next
) {
3233 /* kick off the DMA by notifying firmware the
3234 * write index has moved; make sure TBD stores are sync'd */
3235 write_register(priv
->net_dev
,
3236 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
3241 static void ipw2100_irq_tasklet(struct ipw2100_priv
*priv
)
3243 struct net_device
*dev
= priv
->net_dev
;
3244 unsigned long flags
;
3247 spin_lock_irqsave(&priv
->low_lock
, flags
);
3248 ipw2100_disable_interrupts(priv
);
3250 read_register(dev
, IPW_REG_INTA
, &inta
);
3252 IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n",
3253 (unsigned long)inta
& IPW_INTERRUPT_MASK
);
3258 /* We do not loop and keep polling for more interrupts as this
3259 * is frowned upon and doesn't play nicely with other potentially
3261 IPW_DEBUG_ISR("INTA: 0x%08lX\n",
3262 (unsigned long)inta
& IPW_INTERRUPT_MASK
);
3264 if (inta
& IPW2100_INTA_FATAL_ERROR
) {
3265 printk(KERN_WARNING DRV_NAME
3266 ": Fatal interrupt. Scheduling firmware restart.\n");
3268 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_FATAL_ERROR
);
3270 read_nic_dword(dev
, IPW_NIC_FATAL_ERROR
, &priv
->fatal_error
);
3271 IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n",
3272 priv
->net_dev
->name
, priv
->fatal_error
);
3274 read_nic_dword(dev
, IPW_ERROR_ADDR(priv
->fatal_error
), &tmp
);
3275 IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n",
3276 priv
->net_dev
->name
, tmp
);
3278 /* Wake up any sleeping jobs */
3279 schedule_reset(priv
);
3282 if (inta
& IPW2100_INTA_PARITY_ERROR
) {
3283 printk(KERN_ERR DRV_NAME
3284 ": ***** PARITY ERROR INTERRUPT !!!!\n");
3286 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_PARITY_ERROR
);
3289 if (inta
& IPW2100_INTA_RX_TRANSFER
) {
3290 IPW_DEBUG_ISR("RX interrupt\n");
3292 priv
->rx_interrupts
++;
3294 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_RX_TRANSFER
);
3296 __ipw2100_rx_process(priv
);
3297 __ipw2100_tx_complete(priv
);
3300 if (inta
& IPW2100_INTA_TX_TRANSFER
) {
3301 IPW_DEBUG_ISR("TX interrupt\n");
3303 priv
->tx_interrupts
++;
3305 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_TX_TRANSFER
);
3307 __ipw2100_tx_complete(priv
);
3308 ipw2100_tx_send_commands(priv
);
3309 ipw2100_tx_send_data(priv
);
3312 if (inta
& IPW2100_INTA_TX_COMPLETE
) {
3313 IPW_DEBUG_ISR("TX complete\n");
3315 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_TX_COMPLETE
);
3317 __ipw2100_tx_complete(priv
);
3320 if (inta
& IPW2100_INTA_EVENT_INTERRUPT
) {
3321 /* ipw2100_handle_event(dev); */
3323 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_EVENT_INTERRUPT
);
3326 if (inta
& IPW2100_INTA_FW_INIT_DONE
) {
3327 IPW_DEBUG_ISR("FW init done interrupt\n");
3330 read_register(dev
, IPW_REG_INTA
, &tmp
);
3331 if (tmp
& (IPW2100_INTA_FATAL_ERROR
|
3332 IPW2100_INTA_PARITY_ERROR
)) {
3333 write_register(dev
, IPW_REG_INTA
,
3334 IPW2100_INTA_FATAL_ERROR
|
3335 IPW2100_INTA_PARITY_ERROR
);
3338 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_FW_INIT_DONE
);
3341 if (inta
& IPW2100_INTA_STATUS_CHANGE
) {
3342 IPW_DEBUG_ISR("Status change interrupt\n");
3344 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_STATUS_CHANGE
);
3347 if (inta
& IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE
) {
3348 IPW_DEBUG_ISR("slave host mode interrupt\n");
3350 write_register(dev
, IPW_REG_INTA
,
3351 IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE
);
3355 ipw2100_enable_interrupts(priv
);
3357 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3359 IPW_DEBUG_ISR("exit\n");
3362 static irqreturn_t
ipw2100_interrupt(int irq
, void *data
)
3364 struct ipw2100_priv
*priv
= data
;
3365 u32 inta
, inta_mask
;
3370 spin_lock(&priv
->low_lock
);
3372 /* We check to see if we should be ignoring interrupts before
3373 * we touch the hardware. During ucode load if we try and handle
3374 * an interrupt we can cause keyboard problems as well as cause
3375 * the ucode to fail to initialize */
3376 if (!(priv
->status
& STATUS_INT_ENABLED
)) {
3381 read_register(priv
->net_dev
, IPW_REG_INTA_MASK
, &inta_mask
);
3382 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
3384 if (inta
== 0xFFFFFFFF) {
3385 /* Hardware disappeared */
3386 printk(KERN_WARNING DRV_NAME
": IRQ INTA == 0xFFFFFFFF\n");
3390 inta
&= IPW_INTERRUPT_MASK
;
3392 if (!(inta
& inta_mask
)) {
3393 /* Shared interrupt */
3397 /* We disable the hardware interrupt here just to prevent unneeded
3398 * calls to be made. We disable this again within the actual
3399 * work tasklet, so if another part of the code re-enables the
3400 * interrupt, that is fine */
3401 ipw2100_disable_interrupts(priv
);
3403 tasklet_schedule(&priv
->irq_tasklet
);
3404 spin_unlock(&priv
->low_lock
);
3408 spin_unlock(&priv
->low_lock
);
3412 static netdev_tx_t
ipw2100_tx(struct libipw_txb
*txb
,
3413 struct net_device
*dev
, int pri
)
3415 struct ipw2100_priv
*priv
= libipw_priv(dev
);
3416 struct list_head
*element
;
3417 struct ipw2100_tx_packet
*packet
;
3418 unsigned long flags
;
3420 spin_lock_irqsave(&priv
->low_lock
, flags
);
3422 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
3423 IPW_DEBUG_INFO("Can not transmit when not connected.\n");
3424 priv
->net_dev
->stats
.tx_carrier_errors
++;
3425 netif_stop_queue(dev
);
3429 if (list_empty(&priv
->tx_free_list
))
3432 element
= priv
->tx_free_list
.next
;
3433 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3435 packet
->info
.d_struct
.txb
= txb
;
3437 IPW_DEBUG_TX("Sending fragment (%d bytes):\n", txb
->fragments
[0]->len
);
3438 printk_buf(IPW_DL_TX
, txb
->fragments
[0]->data
, txb
->fragments
[0]->len
);
3440 packet
->jiffy_start
= jiffies
;
3443 DEC_STAT(&priv
->tx_free_stat
);
3445 list_add_tail(element
, &priv
->tx_pend_list
);
3446 INC_STAT(&priv
->tx_pend_stat
);
3448 ipw2100_tx_send_data(priv
);
3450 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3451 return NETDEV_TX_OK
;
3454 netif_stop_queue(dev
);
3455 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3456 return NETDEV_TX_BUSY
;
3459 static int ipw2100_msg_allocate(struct ipw2100_priv
*priv
)
3461 int i
, j
, err
= -EINVAL
;
3466 kmalloc(IPW_COMMAND_POOL_SIZE
* sizeof(struct ipw2100_tx_packet
),
3468 if (!priv
->msg_buffers
) {
3469 printk(KERN_ERR DRV_NAME
": %s: PCI alloc failed for msg "
3470 "buffers.\n", priv
->net_dev
->name
);
3474 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++) {
3475 v
= pci_alloc_consistent(priv
->pci_dev
,
3476 sizeof(struct ipw2100_cmd_header
), &p
);
3478 printk(KERN_ERR DRV_NAME
": "
3479 "%s: PCI alloc failed for msg "
3480 "buffers.\n", priv
->net_dev
->name
);
3485 memset(v
, 0, sizeof(struct ipw2100_cmd_header
));
3487 priv
->msg_buffers
[i
].type
= COMMAND
;
3488 priv
->msg_buffers
[i
].info
.c_struct
.cmd
=
3489 (struct ipw2100_cmd_header
*)v
;
3490 priv
->msg_buffers
[i
].info
.c_struct
.cmd_phys
= p
;
3493 if (i
== IPW_COMMAND_POOL_SIZE
)
3496 for (j
= 0; j
< i
; j
++) {
3497 pci_free_consistent(priv
->pci_dev
,
3498 sizeof(struct ipw2100_cmd_header
),
3499 priv
->msg_buffers
[j
].info
.c_struct
.cmd
,
3500 priv
->msg_buffers
[j
].info
.c_struct
.
3504 kfree(priv
->msg_buffers
);
3505 priv
->msg_buffers
= NULL
;
3510 static int ipw2100_msg_initialize(struct ipw2100_priv
*priv
)
3514 INIT_LIST_HEAD(&priv
->msg_free_list
);
3515 INIT_LIST_HEAD(&priv
->msg_pend_list
);
3517 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++)
3518 list_add_tail(&priv
->msg_buffers
[i
].list
, &priv
->msg_free_list
);
3519 SET_STAT(&priv
->msg_free_stat
, i
);
3524 static void ipw2100_msg_free(struct ipw2100_priv
*priv
)
3528 if (!priv
->msg_buffers
)
3531 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++) {
3532 pci_free_consistent(priv
->pci_dev
,
3533 sizeof(struct ipw2100_cmd_header
),
3534 priv
->msg_buffers
[i
].info
.c_struct
.cmd
,
3535 priv
->msg_buffers
[i
].info
.c_struct
.
3539 kfree(priv
->msg_buffers
);
3540 priv
->msg_buffers
= NULL
;
3543 static ssize_t
show_pci(struct device
*d
, struct device_attribute
*attr
,
3546 struct pci_dev
*pci_dev
= container_of(d
, struct pci_dev
, dev
);
3551 for (i
= 0; i
< 16; i
++) {
3552 out
+= sprintf(out
, "[%08X] ", i
* 16);
3553 for (j
= 0; j
< 16; j
+= 4) {
3554 pci_read_config_dword(pci_dev
, i
* 16 + j
, &val
);
3555 out
+= sprintf(out
, "%08X ", val
);
3557 out
+= sprintf(out
, "\n");
3563 static DEVICE_ATTR(pci
, S_IRUGO
, show_pci
, NULL
);
3565 static ssize_t
show_cfg(struct device
*d
, struct device_attribute
*attr
,
3568 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3569 return sprintf(buf
, "0x%08x\n", (int)p
->config
);
3572 static DEVICE_ATTR(cfg
, S_IRUGO
, show_cfg
, NULL
);
3574 static ssize_t
show_status(struct device
*d
, struct device_attribute
*attr
,
3577 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3578 return sprintf(buf
, "0x%08x\n", (int)p
->status
);
3581 static DEVICE_ATTR(status
, S_IRUGO
, show_status
, NULL
);
3583 static ssize_t
show_capability(struct device
*d
, struct device_attribute
*attr
,
3586 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3587 return sprintf(buf
, "0x%08x\n", (int)p
->capability
);
3590 static DEVICE_ATTR(capability
, S_IRUGO
, show_capability
, NULL
);
3592 #define IPW2100_REG(x) { IPW_ ##x, #x }
3593 static const struct {
3597 IPW2100_REG(REG_GP_CNTRL
),
3598 IPW2100_REG(REG_GPIO
),
3599 IPW2100_REG(REG_INTA
),
3600 IPW2100_REG(REG_INTA_MASK
), IPW2100_REG(REG_RESET_REG
),};
3601 #define IPW2100_NIC(x, s) { x, #x, s }
3602 static const struct {
3607 IPW2100_NIC(IPW2100_CONTROL_REG
, 2),
3608 IPW2100_NIC(0x210014, 1), IPW2100_NIC(0x210000, 1),};
3609 #define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d }
3610 static const struct {
3615 IPW2100_ORD(STAT_TX_HOST_REQUESTS
, "requested Host Tx's (MSDU)"),
3616 IPW2100_ORD(STAT_TX_HOST_COMPLETE
,
3617 "successful Host Tx's (MSDU)"),
3618 IPW2100_ORD(STAT_TX_DIR_DATA
,
3619 "successful Directed Tx's (MSDU)"),
3620 IPW2100_ORD(STAT_TX_DIR_DATA1
,
3621 "successful Directed Tx's (MSDU) @ 1MB"),
3622 IPW2100_ORD(STAT_TX_DIR_DATA2
,
3623 "successful Directed Tx's (MSDU) @ 2MB"),
3624 IPW2100_ORD(STAT_TX_DIR_DATA5_5
,
3625 "successful Directed Tx's (MSDU) @ 5_5MB"),
3626 IPW2100_ORD(STAT_TX_DIR_DATA11
,
3627 "successful Directed Tx's (MSDU) @ 11MB"),
3628 IPW2100_ORD(STAT_TX_NODIR_DATA1
,
3629 "successful Non_Directed Tx's (MSDU) @ 1MB"),
3630 IPW2100_ORD(STAT_TX_NODIR_DATA2
,
3631 "successful Non_Directed Tx's (MSDU) @ 2MB"),
3632 IPW2100_ORD(STAT_TX_NODIR_DATA5_5
,
3633 "successful Non_Directed Tx's (MSDU) @ 5.5MB"),
3634 IPW2100_ORD(STAT_TX_NODIR_DATA11
,
3635 "successful Non_Directed Tx's (MSDU) @ 11MB"),
3636 IPW2100_ORD(STAT_NULL_DATA
, "successful NULL data Tx's"),
3637 IPW2100_ORD(STAT_TX_RTS
, "successful Tx RTS"),
3638 IPW2100_ORD(STAT_TX_CTS
, "successful Tx CTS"),
3639 IPW2100_ORD(STAT_TX_ACK
, "successful Tx ACK"),
3640 IPW2100_ORD(STAT_TX_ASSN
, "successful Association Tx's"),
3641 IPW2100_ORD(STAT_TX_ASSN_RESP
,
3642 "successful Association response Tx's"),
3643 IPW2100_ORD(STAT_TX_REASSN
,
3644 "successful Reassociation Tx's"),
3645 IPW2100_ORD(STAT_TX_REASSN_RESP
,
3646 "successful Reassociation response Tx's"),
3647 IPW2100_ORD(STAT_TX_PROBE
,
3648 "probes successfully transmitted"),
3649 IPW2100_ORD(STAT_TX_PROBE_RESP
,
3650 "probe responses successfully transmitted"),
3651 IPW2100_ORD(STAT_TX_BEACON
, "tx beacon"),
3652 IPW2100_ORD(STAT_TX_ATIM
, "Tx ATIM"),
3653 IPW2100_ORD(STAT_TX_DISASSN
,
3654 "successful Disassociation TX"),
3655 IPW2100_ORD(STAT_TX_AUTH
, "successful Authentication Tx"),
3656 IPW2100_ORD(STAT_TX_DEAUTH
,
3657 "successful Deauthentication TX"),
3658 IPW2100_ORD(STAT_TX_TOTAL_BYTES
,
3659 "Total successful Tx data bytes"),
3660 IPW2100_ORD(STAT_TX_RETRIES
, "Tx retries"),
3661 IPW2100_ORD(STAT_TX_RETRY1
, "Tx retries at 1MBPS"),
3662 IPW2100_ORD(STAT_TX_RETRY2
, "Tx retries at 2MBPS"),
3663 IPW2100_ORD(STAT_TX_RETRY5_5
, "Tx retries at 5.5MBPS"),
3664 IPW2100_ORD(STAT_TX_RETRY11
, "Tx retries at 11MBPS"),
3665 IPW2100_ORD(STAT_TX_FAILURES
, "Tx Failures"),
3666 IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP
,
3667 "times max tries in a hop failed"),
3668 IPW2100_ORD(STAT_TX_DISASSN_FAIL
,
3669 "times disassociation failed"),
3670 IPW2100_ORD(STAT_TX_ERR_CTS
, "missed/bad CTS frames"),
3671 IPW2100_ORD(STAT_TX_ERR_ACK
, "tx err due to acks"),
3672 IPW2100_ORD(STAT_RX_HOST
, "packets passed to host"),
3673 IPW2100_ORD(STAT_RX_DIR_DATA
, "directed packets"),
3674 IPW2100_ORD(STAT_RX_DIR_DATA1
, "directed packets at 1MB"),
3675 IPW2100_ORD(STAT_RX_DIR_DATA2
, "directed packets at 2MB"),
3676 IPW2100_ORD(STAT_RX_DIR_DATA5_5
,
3677 "directed packets at 5.5MB"),
3678 IPW2100_ORD(STAT_RX_DIR_DATA11
, "directed packets at 11MB"),
3679 IPW2100_ORD(STAT_RX_NODIR_DATA
, "nondirected packets"),
3680 IPW2100_ORD(STAT_RX_NODIR_DATA1
,
3681 "nondirected packets at 1MB"),
3682 IPW2100_ORD(STAT_RX_NODIR_DATA2
,
3683 "nondirected packets at 2MB"),
3684 IPW2100_ORD(STAT_RX_NODIR_DATA5_5
,
3685 "nondirected packets at 5.5MB"),
3686 IPW2100_ORD(STAT_RX_NODIR_DATA11
,
3687 "nondirected packets at 11MB"),
3688 IPW2100_ORD(STAT_RX_NULL_DATA
, "null data rx's"),
3689 IPW2100_ORD(STAT_RX_RTS
, "Rx RTS"), IPW2100_ORD(STAT_RX_CTS
,
3691 IPW2100_ORD(STAT_RX_ACK
, "Rx ACK"),
3692 IPW2100_ORD(STAT_RX_CFEND
, "Rx CF End"),
3693 IPW2100_ORD(STAT_RX_CFEND_ACK
, "Rx CF End + CF Ack"),
3694 IPW2100_ORD(STAT_RX_ASSN
, "Association Rx's"),
3695 IPW2100_ORD(STAT_RX_ASSN_RESP
, "Association response Rx's"),
3696 IPW2100_ORD(STAT_RX_REASSN
, "Reassociation Rx's"),
3697 IPW2100_ORD(STAT_RX_REASSN_RESP
,
3698 "Reassociation response Rx's"),
3699 IPW2100_ORD(STAT_RX_PROBE
, "probe Rx's"),
3700 IPW2100_ORD(STAT_RX_PROBE_RESP
, "probe response Rx's"),
3701 IPW2100_ORD(STAT_RX_BEACON
, "Rx beacon"),
3702 IPW2100_ORD(STAT_RX_ATIM
, "Rx ATIM"),
3703 IPW2100_ORD(STAT_RX_DISASSN
, "disassociation Rx"),
3704 IPW2100_ORD(STAT_RX_AUTH
, "authentication Rx"),
3705 IPW2100_ORD(STAT_RX_DEAUTH
, "deauthentication Rx"),
3706 IPW2100_ORD(STAT_RX_TOTAL_BYTES
,
3707 "Total rx data bytes received"),
3708 IPW2100_ORD(STAT_RX_ERR_CRC
, "packets with Rx CRC error"),
3709 IPW2100_ORD(STAT_RX_ERR_CRC1
, "Rx CRC errors at 1MB"),
3710 IPW2100_ORD(STAT_RX_ERR_CRC2
, "Rx CRC errors at 2MB"),
3711 IPW2100_ORD(STAT_RX_ERR_CRC5_5
, "Rx CRC errors at 5.5MB"),
3712 IPW2100_ORD(STAT_RX_ERR_CRC11
, "Rx CRC errors at 11MB"),
3713 IPW2100_ORD(STAT_RX_DUPLICATE1
,
3714 "duplicate rx packets at 1MB"),
3715 IPW2100_ORD(STAT_RX_DUPLICATE2
,
3716 "duplicate rx packets at 2MB"),
3717 IPW2100_ORD(STAT_RX_DUPLICATE5_5
,
3718 "duplicate rx packets at 5.5MB"),
3719 IPW2100_ORD(STAT_RX_DUPLICATE11
,
3720 "duplicate rx packets at 11MB"),
3721 IPW2100_ORD(STAT_RX_DUPLICATE
, "duplicate rx packets"),
3722 IPW2100_ORD(PERS_DB_LOCK
, "locking fw permanent db"),
3723 IPW2100_ORD(PERS_DB_SIZE
, "size of fw permanent db"),
3724 IPW2100_ORD(PERS_DB_ADDR
, "address of fw permanent db"),
3725 IPW2100_ORD(STAT_RX_INVALID_PROTOCOL
,
3726 "rx frames with invalid protocol"),
3727 IPW2100_ORD(SYS_BOOT_TIME
, "Boot time"),
3728 IPW2100_ORD(STAT_RX_NO_BUFFER
,
3729 "rx frames rejected due to no buffer"),
3730 IPW2100_ORD(STAT_RX_MISSING_FRAG
,
3731 "rx frames dropped due to missing fragment"),
3732 IPW2100_ORD(STAT_RX_ORPHAN_FRAG
,
3733 "rx frames dropped due to non-sequential fragment"),
3734 IPW2100_ORD(STAT_RX_ORPHAN_FRAME
,
3735 "rx frames dropped due to unmatched 1st frame"),
3736 IPW2100_ORD(STAT_RX_FRAG_AGEOUT
,
3737 "rx frames dropped due to uncompleted frame"),
3738 IPW2100_ORD(STAT_RX_ICV_ERRORS
,
3739 "ICV errors during decryption"),
3740 IPW2100_ORD(STAT_PSP_SUSPENSION
, "times adapter suspended"),
3741 IPW2100_ORD(STAT_PSP_BCN_TIMEOUT
, "beacon timeout"),
3742 IPW2100_ORD(STAT_PSP_POLL_TIMEOUT
,
3743 "poll response timeouts"),
3744 IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT
,
3745 "timeouts waiting for last {broad,multi}cast pkt"),
3746 IPW2100_ORD(STAT_PSP_RX_DTIMS
, "PSP DTIMs received"),
3747 IPW2100_ORD(STAT_PSP_RX_TIMS
, "PSP TIMs received"),
3748 IPW2100_ORD(STAT_PSP_STATION_ID
, "PSP Station ID"),
3749 IPW2100_ORD(LAST_ASSN_TIME
, "RTC time of last association"),
3750 IPW2100_ORD(STAT_PERCENT_MISSED_BCNS
,
3751 "current calculation of % missed beacons"),
3752 IPW2100_ORD(STAT_PERCENT_RETRIES
,
3753 "current calculation of % missed tx retries"),
3754 IPW2100_ORD(ASSOCIATED_AP_PTR
,
3755 "0 if not associated, else pointer to AP table entry"),
3756 IPW2100_ORD(AVAILABLE_AP_CNT
,
3757 "AP's decsribed in the AP table"),
3758 IPW2100_ORD(AP_LIST_PTR
, "Ptr to list of available APs"),
3759 IPW2100_ORD(STAT_AP_ASSNS
, "associations"),
3760 IPW2100_ORD(STAT_ASSN_FAIL
, "association failures"),
3761 IPW2100_ORD(STAT_ASSN_RESP_FAIL
,
3762 "failures due to response fail"),
3763 IPW2100_ORD(STAT_FULL_SCANS
, "full scans"),
3764 IPW2100_ORD(CARD_DISABLED
, "Card Disabled"),
3765 IPW2100_ORD(STAT_ROAM_INHIBIT
,
3766 "times roaming was inhibited due to activity"),
3767 IPW2100_ORD(RSSI_AT_ASSN
,
3768 "RSSI of associated AP at time of association"),
3769 IPW2100_ORD(STAT_ASSN_CAUSE1
,
3770 "reassociation: no probe response or TX on hop"),
3771 IPW2100_ORD(STAT_ASSN_CAUSE2
,
3772 "reassociation: poor tx/rx quality"),
3773 IPW2100_ORD(STAT_ASSN_CAUSE3
,
3774 "reassociation: tx/rx quality (excessive AP load"),
3775 IPW2100_ORD(STAT_ASSN_CAUSE4
,
3776 "reassociation: AP RSSI level"),
3777 IPW2100_ORD(STAT_ASSN_CAUSE5
,
3778 "reassociations due to load leveling"),
3779 IPW2100_ORD(STAT_AUTH_FAIL
, "times authentication failed"),
3780 IPW2100_ORD(STAT_AUTH_RESP_FAIL
,
3781 "times authentication response failed"),
3782 IPW2100_ORD(STATION_TABLE_CNT
,
3783 "entries in association table"),
3784 IPW2100_ORD(RSSI_AVG_CURR
, "Current avg RSSI"),
3785 IPW2100_ORD(POWER_MGMT_MODE
, "Power mode - 0=CAM, 1=PSP"),
3786 IPW2100_ORD(COUNTRY_CODE
,
3787 "IEEE country code as recv'd from beacon"),
3788 IPW2100_ORD(COUNTRY_CHANNELS
,
3789 "channels suported by country"),
3790 IPW2100_ORD(RESET_CNT
, "adapter resets (warm)"),
3791 IPW2100_ORD(BEACON_INTERVAL
, "Beacon interval"),
3792 IPW2100_ORD(ANTENNA_DIVERSITY
,
3793 "TRUE if antenna diversity is disabled"),
3794 IPW2100_ORD(DTIM_PERIOD
, "beacon intervals between DTIMs"),
3795 IPW2100_ORD(OUR_FREQ
,
3796 "current radio freq lower digits - channel ID"),
3797 IPW2100_ORD(RTC_TIME
, "current RTC time"),
3798 IPW2100_ORD(PORT_TYPE
, "operating mode"),
3799 IPW2100_ORD(CURRENT_TX_RATE
, "current tx rate"),
3800 IPW2100_ORD(SUPPORTED_RATES
, "supported tx rates"),
3801 IPW2100_ORD(ATIM_WINDOW
, "current ATIM Window"),
3802 IPW2100_ORD(BASIC_RATES
, "basic tx rates"),
3803 IPW2100_ORD(NIC_HIGHEST_RATE
, "NIC highest tx rate"),
3804 IPW2100_ORD(AP_HIGHEST_RATE
, "AP highest tx rate"),
3805 IPW2100_ORD(CAPABILITIES
,
3806 "Management frame capability field"),
3807 IPW2100_ORD(AUTH_TYPE
, "Type of authentication"),
3808 IPW2100_ORD(RADIO_TYPE
, "Adapter card platform type"),
3809 IPW2100_ORD(RTS_THRESHOLD
,
3810 "Min packet length for RTS handshaking"),
3811 IPW2100_ORD(INT_MODE
, "International mode"),
3812 IPW2100_ORD(FRAGMENTATION_THRESHOLD
,
3813 "protocol frag threshold"),
3814 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS
,
3815 "EEPROM offset in SRAM"),
3816 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE
,
3817 "EEPROM size in SRAM"),
3818 IPW2100_ORD(EEPROM_SKU_CAPABILITY
, "EEPROM SKU Capability"),
3819 IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS
,
3820 "EEPROM IBSS 11b channel set"),
3821 IPW2100_ORD(MAC_VERSION
, "MAC Version"),
3822 IPW2100_ORD(MAC_REVISION
, "MAC Revision"),
3823 IPW2100_ORD(RADIO_VERSION
, "Radio Version"),
3824 IPW2100_ORD(NIC_MANF_DATE_TIME
, "MANF Date/Time STAMP"),
3825 IPW2100_ORD(UCODE_VERSION
, "Ucode Version"),};
3827 static ssize_t
show_registers(struct device
*d
, struct device_attribute
*attr
,
3831 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3832 struct net_device
*dev
= priv
->net_dev
;
3836 out
+= sprintf(out
, "%30s [Address ] : Hex\n", "Register");
3838 for (i
= 0; i
< ARRAY_SIZE(hw_data
); i
++) {
3839 read_register(dev
, hw_data
[i
].addr
, &val
);
3840 out
+= sprintf(out
, "%30s [%08X] : %08X\n",
3841 hw_data
[i
].name
, hw_data
[i
].addr
, val
);
3847 static DEVICE_ATTR(registers
, S_IRUGO
, show_registers
, NULL
);
3849 static ssize_t
show_hardware(struct device
*d
, struct device_attribute
*attr
,
3852 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3853 struct net_device
*dev
= priv
->net_dev
;
3857 out
+= sprintf(out
, "%30s [Address ] : Hex\n", "NIC entry");
3859 for (i
= 0; i
< ARRAY_SIZE(nic_data
); i
++) {
3864 switch (nic_data
[i
].size
) {
3866 read_nic_byte(dev
, nic_data
[i
].addr
, &tmp8
);
3867 out
+= sprintf(out
, "%30s [%08X] : %02X\n",
3868 nic_data
[i
].name
, nic_data
[i
].addr
,
3872 read_nic_word(dev
, nic_data
[i
].addr
, &tmp16
);
3873 out
+= sprintf(out
, "%30s [%08X] : %04X\n",
3874 nic_data
[i
].name
, nic_data
[i
].addr
,
3878 read_nic_dword(dev
, nic_data
[i
].addr
, &tmp32
);
3879 out
+= sprintf(out
, "%30s [%08X] : %08X\n",
3880 nic_data
[i
].name
, nic_data
[i
].addr
,
3888 static DEVICE_ATTR(hardware
, S_IRUGO
, show_hardware
, NULL
);
3890 static ssize_t
show_memory(struct device
*d
, struct device_attribute
*attr
,
3893 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3894 struct net_device
*dev
= priv
->net_dev
;
3895 static unsigned long loop
= 0;
3901 if (loop
>= 0x30000)
3904 /* sysfs provides us PAGE_SIZE buffer */
3905 while (len
< PAGE_SIZE
- 128 && loop
< 0x30000) {
3907 if (priv
->snapshot
[0])
3908 for (i
= 0; i
< 4; i
++)
3910 *(u32
*) SNAPSHOT_ADDR(loop
+ i
* 4);
3912 for (i
= 0; i
< 4; i
++)
3913 read_nic_dword(dev
, loop
+ i
* 4, &buffer
[i
]);
3916 len
+= sprintf(buf
+ len
,
3921 ((u8
*) buffer
)[0x0],
3922 ((u8
*) buffer
)[0x1],
3923 ((u8
*) buffer
)[0x2],
3924 ((u8
*) buffer
)[0x3],
3925 ((u8
*) buffer
)[0x4],
3926 ((u8
*) buffer
)[0x5],
3927 ((u8
*) buffer
)[0x6],
3928 ((u8
*) buffer
)[0x7],
3929 ((u8
*) buffer
)[0x8],
3930 ((u8
*) buffer
)[0x9],
3931 ((u8
*) buffer
)[0xa],
3932 ((u8
*) buffer
)[0xb],
3933 ((u8
*) buffer
)[0xc],
3934 ((u8
*) buffer
)[0xd],
3935 ((u8
*) buffer
)[0xe],
3936 ((u8
*) buffer
)[0xf]);
3938 len
+= sprintf(buf
+ len
, "%s\n",
3939 snprint_line(line
, sizeof(line
),
3940 (u8
*) buffer
, 16, loop
));
3947 static ssize_t
store_memory(struct device
*d
, struct device_attribute
*attr
,
3948 const char *buf
, size_t count
)
3950 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3951 struct net_device
*dev
= priv
->net_dev
;
3952 const char *p
= buf
;
3954 (void)dev
; /* kill unused-var warning for debug-only code */
3960 (count
>= 2 && tolower(p
[0]) == 'o' && tolower(p
[1]) == 'n')) {
3961 IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n",
3965 } else if (p
[0] == '0' || (count
>= 2 && tolower(p
[0]) == 'o' &&
3966 tolower(p
[1]) == 'f')) {
3967 IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n",
3971 } else if (tolower(p
[0]) == 'r') {
3972 IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n", dev
->name
);
3973 ipw2100_snapshot_free(priv
);
3976 IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, "
3977 "reset = clear memory snapshot\n", dev
->name
);
3982 static DEVICE_ATTR(memory
, S_IWUSR
| S_IRUGO
, show_memory
, store_memory
);
3984 static ssize_t
show_ordinals(struct device
*d
, struct device_attribute
*attr
,
3987 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3991 static int loop
= 0;
3993 if (priv
->status
& STATUS_RF_KILL_MASK
)
3996 if (loop
>= ARRAY_SIZE(ord_data
))
3999 /* sysfs provides us PAGE_SIZE buffer */
4000 while (len
< PAGE_SIZE
- 128 && loop
< ARRAY_SIZE(ord_data
)) {
4001 val_len
= sizeof(u32
);
4003 if (ipw2100_get_ordinal(priv
, ord_data
[loop
].index
, &val
,
4005 len
+= sprintf(buf
+ len
, "[0x%02X] = ERROR %s\n",
4006 ord_data
[loop
].index
,
4007 ord_data
[loop
].desc
);
4009 len
+= sprintf(buf
+ len
, "[0x%02X] = 0x%08X %s\n",
4010 ord_data
[loop
].index
, val
,
4011 ord_data
[loop
].desc
);
4018 static DEVICE_ATTR(ordinals
, S_IRUGO
, show_ordinals
, NULL
);
4020 static ssize_t
show_stats(struct device
*d
, struct device_attribute
*attr
,
4023 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4026 out
+= sprintf(out
, "interrupts: %d {tx: %d, rx: %d, other: %d}\n",
4027 priv
->interrupts
, priv
->tx_interrupts
,
4028 priv
->rx_interrupts
, priv
->inta_other
);
4029 out
+= sprintf(out
, "firmware resets: %d\n", priv
->resets
);
4030 out
+= sprintf(out
, "firmware hangs: %d\n", priv
->hangs
);
4031 #ifdef CONFIG_IPW2100_DEBUG
4032 out
+= sprintf(out
, "packet mismatch image: %s\n",
4033 priv
->snapshot
[0] ? "YES" : "NO");
4039 static DEVICE_ATTR(stats
, S_IRUGO
, show_stats
, NULL
);
4041 static int ipw2100_switch_mode(struct ipw2100_priv
*priv
, u32 mode
)
4045 if (mode
== priv
->ieee
->iw_mode
)
4048 err
= ipw2100_disable_adapter(priv
);
4050 printk(KERN_ERR DRV_NAME
": %s: Could not disable adapter %d\n",
4051 priv
->net_dev
->name
, err
);
4057 priv
->net_dev
->type
= ARPHRD_ETHER
;
4060 priv
->net_dev
->type
= ARPHRD_ETHER
;
4062 #ifdef CONFIG_IPW2100_MONITOR
4063 case IW_MODE_MONITOR
:
4064 priv
->last_mode
= priv
->ieee
->iw_mode
;
4065 priv
->net_dev
->type
= ARPHRD_IEEE80211_RADIOTAP
;
4067 #endif /* CONFIG_IPW2100_MONITOR */
4070 priv
->ieee
->iw_mode
= mode
;
4073 /* Indicate ipw2100_download_firmware download firmware
4074 * from disk instead of memory. */
4075 ipw2100_firmware
.version
= 0;
4078 printk(KERN_INFO
"%s: Reseting on mode change.\n", priv
->net_dev
->name
);
4079 priv
->reset_backoff
= 0;
4080 schedule_reset(priv
);
4085 static ssize_t
show_internals(struct device
*d
, struct device_attribute
*attr
,
4088 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4091 #define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" y "\n", priv-> x)
4093 if (priv
->status
& STATUS_ASSOCIATED
)
4094 len
+= sprintf(buf
+ len
, "connected: %lu\n",
4095 get_seconds() - priv
->connect_start
);
4097 len
+= sprintf(buf
+ len
, "not connected\n");
4099 DUMP_VAR(ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
], "p");
4100 DUMP_VAR(status
, "08lx");
4101 DUMP_VAR(config
, "08lx");
4102 DUMP_VAR(capability
, "08lx");
4105 sprintf(buf
+ len
, "last_rtc: %lu\n",
4106 (unsigned long)priv
->last_rtc
);
4108 DUMP_VAR(fatal_error
, "d");
4109 DUMP_VAR(stop_hang_check
, "d");
4110 DUMP_VAR(stop_rf_kill
, "d");
4111 DUMP_VAR(messages_sent
, "d");
4113 DUMP_VAR(tx_pend_stat
.value
, "d");
4114 DUMP_VAR(tx_pend_stat
.hi
, "d");
4116 DUMP_VAR(tx_free_stat
.value
, "d");
4117 DUMP_VAR(tx_free_stat
.lo
, "d");
4119 DUMP_VAR(msg_free_stat
.value
, "d");
4120 DUMP_VAR(msg_free_stat
.lo
, "d");
4122 DUMP_VAR(msg_pend_stat
.value
, "d");
4123 DUMP_VAR(msg_pend_stat
.hi
, "d");
4125 DUMP_VAR(fw_pend_stat
.value
, "d");
4126 DUMP_VAR(fw_pend_stat
.hi
, "d");
4128 DUMP_VAR(txq_stat
.value
, "d");
4129 DUMP_VAR(txq_stat
.lo
, "d");
4131 DUMP_VAR(ieee
->scans
, "d");
4132 DUMP_VAR(reset_backoff
, "d");
4137 static DEVICE_ATTR(internals
, S_IRUGO
, show_internals
, NULL
);
4139 static ssize_t
show_bssinfo(struct device
*d
, struct device_attribute
*attr
,
4142 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4143 char essid
[IW_ESSID_MAX_SIZE
+ 1];
4147 unsigned int length
;
4150 if (priv
->status
& STATUS_RF_KILL_MASK
)
4153 memset(essid
, 0, sizeof(essid
));
4154 memset(bssid
, 0, sizeof(bssid
));
4156 length
= IW_ESSID_MAX_SIZE
;
4157 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_SSID
, essid
, &length
);
4159 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4162 length
= sizeof(bssid
);
4163 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
,
4166 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4169 length
= sizeof(u32
);
4170 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_OUR_FREQ
, &chan
, &length
);
4172 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4175 out
+= sprintf(out
, "ESSID: %s\n", essid
);
4176 out
+= sprintf(out
, "BSSID: %pM\n", bssid
);
4177 out
+= sprintf(out
, "Channel: %d\n", chan
);
4182 static DEVICE_ATTR(bssinfo
, S_IRUGO
, show_bssinfo
, NULL
);
4184 #ifdef CONFIG_IPW2100_DEBUG
4185 static ssize_t
show_debug_level(struct device_driver
*d
, char *buf
)
4187 return sprintf(buf
, "0x%08X\n", ipw2100_debug_level
);
4190 static ssize_t
store_debug_level(struct device_driver
*d
,
4191 const char *buf
, size_t count
)
4193 char *p
= (char *)buf
;
4196 if (p
[1] == 'x' || p
[1] == 'X' || p
[0] == 'x' || p
[0] == 'X') {
4198 if (p
[0] == 'x' || p
[0] == 'X')
4200 val
= simple_strtoul(p
, &p
, 16);
4202 val
= simple_strtoul(p
, &p
, 10);
4204 IPW_DEBUG_INFO(": %s is not in hex or decimal form.\n", buf
);
4206 ipw2100_debug_level
= val
;
4208 return strnlen(buf
, count
);
4211 static DRIVER_ATTR(debug_level
, S_IWUSR
| S_IRUGO
, show_debug_level
,
4213 #endif /* CONFIG_IPW2100_DEBUG */
4215 static ssize_t
show_fatal_error(struct device
*d
,
4216 struct device_attribute
*attr
, char *buf
)
4218 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4222 if (priv
->fatal_error
)
4223 out
+= sprintf(out
, "0x%08X\n", priv
->fatal_error
);
4225 out
+= sprintf(out
, "0\n");
4227 for (i
= 1; i
<= IPW2100_ERROR_QUEUE
; i
++) {
4228 if (!priv
->fatal_errors
[(priv
->fatal_index
- i
) %
4229 IPW2100_ERROR_QUEUE
])
4232 out
+= sprintf(out
, "%d. 0x%08X\n", i
,
4233 priv
->fatal_errors
[(priv
->fatal_index
- i
) %
4234 IPW2100_ERROR_QUEUE
]);
4240 static ssize_t
store_fatal_error(struct device
*d
,
4241 struct device_attribute
*attr
, const char *buf
,
4244 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4245 schedule_reset(priv
);
4249 static DEVICE_ATTR(fatal_error
, S_IWUSR
| S_IRUGO
, show_fatal_error
,
4252 static ssize_t
show_scan_age(struct device
*d
, struct device_attribute
*attr
,
4255 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4256 return sprintf(buf
, "%d\n", priv
->ieee
->scan_age
);
4259 static ssize_t
store_scan_age(struct device
*d
, struct device_attribute
*attr
,
4260 const char *buf
, size_t count
)
4262 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4263 struct net_device
*dev
= priv
->net_dev
;
4264 char buffer
[] = "00000000";
4266 (sizeof(buffer
) - 1) > count
? count
: sizeof(buffer
) - 1;
4270 (void)dev
; /* kill unused-var warning for debug-only code */
4272 IPW_DEBUG_INFO("enter\n");
4274 strncpy(buffer
, buf
, len
);
4277 if (p
[1] == 'x' || p
[1] == 'X' || p
[0] == 'x' || p
[0] == 'X') {
4279 if (p
[0] == 'x' || p
[0] == 'X')
4281 val
= simple_strtoul(p
, &p
, 16);
4283 val
= simple_strtoul(p
, &p
, 10);
4285 IPW_DEBUG_INFO("%s: user supplied invalid value.\n", dev
->name
);
4287 priv
->ieee
->scan_age
= val
;
4288 IPW_DEBUG_INFO("set scan_age = %u\n", priv
->ieee
->scan_age
);
4291 IPW_DEBUG_INFO("exit\n");
4295 static DEVICE_ATTR(scan_age
, S_IWUSR
| S_IRUGO
, show_scan_age
, store_scan_age
);
4297 static ssize_t
show_rf_kill(struct device
*d
, struct device_attribute
*attr
,
4300 /* 0 - RF kill not enabled
4301 1 - SW based RF kill active (sysfs)
4302 2 - HW based RF kill active
4303 3 - Both HW and SW baed RF kill active */
4304 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4305 int val
= ((priv
->status
& STATUS_RF_KILL_SW
) ? 0x1 : 0x0) |
4306 (rf_kill_active(priv
) ? 0x2 : 0x0);
4307 return sprintf(buf
, "%i\n", val
);
4310 static int ipw_radio_kill_sw(struct ipw2100_priv
*priv
, int disable_radio
)
4312 if ((disable_radio
? 1 : 0) ==
4313 (priv
->status
& STATUS_RF_KILL_SW
? 1 : 0))
4316 IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n",
4317 disable_radio
? "OFF" : "ON");
4319 mutex_lock(&priv
->action_mutex
);
4321 if (disable_radio
) {
4322 priv
->status
|= STATUS_RF_KILL_SW
;
4325 priv
->status
&= ~STATUS_RF_KILL_SW
;
4326 if (rf_kill_active(priv
)) {
4327 IPW_DEBUG_RF_KILL("Can not turn radio back on - "
4328 "disabled by HW switch\n");
4329 /* Make sure the RF_KILL check timer is running */
4330 priv
->stop_rf_kill
= 0;
4331 cancel_delayed_work(&priv
->rf_kill
);
4332 queue_delayed_work(priv
->workqueue
, &priv
->rf_kill
,
4333 round_jiffies_relative(HZ
));
4335 schedule_reset(priv
);
4338 mutex_unlock(&priv
->action_mutex
);
4342 static ssize_t
store_rf_kill(struct device
*d
, struct device_attribute
*attr
,
4343 const char *buf
, size_t count
)
4345 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4346 ipw_radio_kill_sw(priv
, buf
[0] == '1');
4350 static DEVICE_ATTR(rf_kill
, S_IWUSR
| S_IRUGO
, show_rf_kill
, store_rf_kill
);
4352 static struct attribute
*ipw2100_sysfs_entries
[] = {
4353 &dev_attr_hardware
.attr
,
4354 &dev_attr_registers
.attr
,
4355 &dev_attr_ordinals
.attr
,
4357 &dev_attr_stats
.attr
,
4358 &dev_attr_internals
.attr
,
4359 &dev_attr_bssinfo
.attr
,
4360 &dev_attr_memory
.attr
,
4361 &dev_attr_scan_age
.attr
,
4362 &dev_attr_fatal_error
.attr
,
4363 &dev_attr_rf_kill
.attr
,
4365 &dev_attr_status
.attr
,
4366 &dev_attr_capability
.attr
,
4370 static struct attribute_group ipw2100_attribute_group
= {
4371 .attrs
= ipw2100_sysfs_entries
,
4374 static int status_queue_allocate(struct ipw2100_priv
*priv
, int entries
)
4376 struct ipw2100_status_queue
*q
= &priv
->status_queue
;
4378 IPW_DEBUG_INFO("enter\n");
4380 q
->size
= entries
* sizeof(struct ipw2100_status
);
4382 (struct ipw2100_status
*)pci_alloc_consistent(priv
->pci_dev
,
4385 IPW_DEBUG_WARNING("Can not allocate status queue.\n");
4389 memset(q
->drv
, 0, q
->size
);
4391 IPW_DEBUG_INFO("exit\n");
4396 static void status_queue_free(struct ipw2100_priv
*priv
)
4398 IPW_DEBUG_INFO("enter\n");
4400 if (priv
->status_queue
.drv
) {
4401 pci_free_consistent(priv
->pci_dev
, priv
->status_queue
.size
,
4402 priv
->status_queue
.drv
,
4403 priv
->status_queue
.nic
);
4404 priv
->status_queue
.drv
= NULL
;
4407 IPW_DEBUG_INFO("exit\n");
4410 static int bd_queue_allocate(struct ipw2100_priv
*priv
,
4411 struct ipw2100_bd_queue
*q
, int entries
)
4413 IPW_DEBUG_INFO("enter\n");
4415 memset(q
, 0, sizeof(struct ipw2100_bd_queue
));
4417 q
->entries
= entries
;
4418 q
->size
= entries
* sizeof(struct ipw2100_bd
);
4419 q
->drv
= pci_alloc_consistent(priv
->pci_dev
, q
->size
, &q
->nic
);
4422 ("can't allocate shared memory for buffer descriptors\n");
4425 memset(q
->drv
, 0, q
->size
);
4427 IPW_DEBUG_INFO("exit\n");
4432 static void bd_queue_free(struct ipw2100_priv
*priv
, struct ipw2100_bd_queue
*q
)
4434 IPW_DEBUG_INFO("enter\n");
4440 pci_free_consistent(priv
->pci_dev
, q
->size
, q
->drv
, q
->nic
);
4444 IPW_DEBUG_INFO("exit\n");
4447 static void bd_queue_initialize(struct ipw2100_priv
*priv
,
4448 struct ipw2100_bd_queue
*q
, u32 base
, u32 size
,
4451 IPW_DEBUG_INFO("enter\n");
4453 IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n", q
->drv
,
4456 write_register(priv
->net_dev
, base
, q
->nic
);
4457 write_register(priv
->net_dev
, size
, q
->entries
);
4458 write_register(priv
->net_dev
, r
, q
->oldest
);
4459 write_register(priv
->net_dev
, w
, q
->next
);
4461 IPW_DEBUG_INFO("exit\n");
4464 static void ipw2100_kill_workqueue(struct ipw2100_priv
*priv
)
4466 if (priv
->workqueue
) {
4467 priv
->stop_rf_kill
= 1;
4468 priv
->stop_hang_check
= 1;
4469 cancel_delayed_work(&priv
->reset_work
);
4470 cancel_delayed_work(&priv
->security_work
);
4471 cancel_delayed_work(&priv
->wx_event_work
);
4472 cancel_delayed_work(&priv
->hang_check
);
4473 cancel_delayed_work(&priv
->rf_kill
);
4474 cancel_delayed_work(&priv
->scan_event_later
);
4475 destroy_workqueue(priv
->workqueue
);
4476 priv
->workqueue
= NULL
;
4480 static int ipw2100_tx_allocate(struct ipw2100_priv
*priv
)
4482 int i
, j
, err
= -EINVAL
;
4486 IPW_DEBUG_INFO("enter\n");
4488 err
= bd_queue_allocate(priv
, &priv
->tx_queue
, TX_QUEUE_LENGTH
);
4490 IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n",
4491 priv
->net_dev
->name
);
4496 kmalloc(TX_PENDED_QUEUE_LENGTH
* sizeof(struct ipw2100_tx_packet
),
4498 if (!priv
->tx_buffers
) {
4499 printk(KERN_ERR DRV_NAME
4500 ": %s: alloc failed form tx buffers.\n",
4501 priv
->net_dev
->name
);
4502 bd_queue_free(priv
, &priv
->tx_queue
);
4506 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4507 v
= pci_alloc_consistent(priv
->pci_dev
,
4508 sizeof(struct ipw2100_data_header
),
4511 printk(KERN_ERR DRV_NAME
4512 ": %s: PCI alloc failed for tx " "buffers.\n",
4513 priv
->net_dev
->name
);
4518 priv
->tx_buffers
[i
].type
= DATA
;
4519 priv
->tx_buffers
[i
].info
.d_struct
.data
=
4520 (struct ipw2100_data_header
*)v
;
4521 priv
->tx_buffers
[i
].info
.d_struct
.data_phys
= p
;
4522 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4525 if (i
== TX_PENDED_QUEUE_LENGTH
)
4528 for (j
= 0; j
< i
; j
++) {
4529 pci_free_consistent(priv
->pci_dev
,
4530 sizeof(struct ipw2100_data_header
),
4531 priv
->tx_buffers
[j
].info
.d_struct
.data
,
4532 priv
->tx_buffers
[j
].info
.d_struct
.
4536 kfree(priv
->tx_buffers
);
4537 priv
->tx_buffers
= NULL
;
4542 static void ipw2100_tx_initialize(struct ipw2100_priv
*priv
)
4546 IPW_DEBUG_INFO("enter\n");
4549 * reinitialize packet info lists
4551 INIT_LIST_HEAD(&priv
->fw_pend_list
);
4552 INIT_STAT(&priv
->fw_pend_stat
);
4555 * reinitialize lists
4557 INIT_LIST_HEAD(&priv
->tx_pend_list
);
4558 INIT_LIST_HEAD(&priv
->tx_free_list
);
4559 INIT_STAT(&priv
->tx_pend_stat
);
4560 INIT_STAT(&priv
->tx_free_stat
);
4562 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4563 /* We simply drop any SKBs that have been queued for
4565 if (priv
->tx_buffers
[i
].info
.d_struct
.txb
) {
4566 libipw_txb_free(priv
->tx_buffers
[i
].info
.d_struct
.
4568 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4571 list_add_tail(&priv
->tx_buffers
[i
].list
, &priv
->tx_free_list
);
4574 SET_STAT(&priv
->tx_free_stat
, i
);
4576 priv
->tx_queue
.oldest
= 0;
4577 priv
->tx_queue
.available
= priv
->tx_queue
.entries
;
4578 priv
->tx_queue
.next
= 0;
4579 INIT_STAT(&priv
->txq_stat
);
4580 SET_STAT(&priv
->txq_stat
, priv
->tx_queue
.available
);
4582 bd_queue_initialize(priv
, &priv
->tx_queue
,
4583 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE
,
4584 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE
,
4585 IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX
,
4586 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
);
4588 IPW_DEBUG_INFO("exit\n");
4592 static void ipw2100_tx_free(struct ipw2100_priv
*priv
)
4596 IPW_DEBUG_INFO("enter\n");
4598 bd_queue_free(priv
, &priv
->tx_queue
);
4600 if (!priv
->tx_buffers
)
4603 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4604 if (priv
->tx_buffers
[i
].info
.d_struct
.txb
) {
4605 libipw_txb_free(priv
->tx_buffers
[i
].info
.d_struct
.
4607 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4609 if (priv
->tx_buffers
[i
].info
.d_struct
.data
)
4610 pci_free_consistent(priv
->pci_dev
,
4611 sizeof(struct ipw2100_data_header
),
4612 priv
->tx_buffers
[i
].info
.d_struct
.
4614 priv
->tx_buffers
[i
].info
.d_struct
.
4618 kfree(priv
->tx_buffers
);
4619 priv
->tx_buffers
= NULL
;
4621 IPW_DEBUG_INFO("exit\n");
4624 static int ipw2100_rx_allocate(struct ipw2100_priv
*priv
)
4626 int i
, j
, err
= -EINVAL
;
4628 IPW_DEBUG_INFO("enter\n");
4630 err
= bd_queue_allocate(priv
, &priv
->rx_queue
, RX_QUEUE_LENGTH
);
4632 IPW_DEBUG_INFO("failed bd_queue_allocate\n");
4636 err
= status_queue_allocate(priv
, RX_QUEUE_LENGTH
);
4638 IPW_DEBUG_INFO("failed status_queue_allocate\n");
4639 bd_queue_free(priv
, &priv
->rx_queue
);
4646 priv
->rx_buffers
= kmalloc(RX_QUEUE_LENGTH
*
4647 sizeof(struct ipw2100_rx_packet
),
4649 if (!priv
->rx_buffers
) {
4650 IPW_DEBUG_INFO("can't allocate rx packet buffer table\n");
4652 bd_queue_free(priv
, &priv
->rx_queue
);
4654 status_queue_free(priv
);
4659 for (i
= 0; i
< RX_QUEUE_LENGTH
; i
++) {
4660 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
4662 err
= ipw2100_alloc_skb(priv
, packet
);
4663 if (unlikely(err
)) {
4668 /* The BD holds the cache aligned address */
4669 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
4670 priv
->rx_queue
.drv
[i
].buf_length
= IPW_RX_NIC_BUFFER_LENGTH
;
4671 priv
->status_queue
.drv
[i
].status_fields
= 0;
4674 if (i
== RX_QUEUE_LENGTH
)
4677 for (j
= 0; j
< i
; j
++) {
4678 pci_unmap_single(priv
->pci_dev
, priv
->rx_buffers
[j
].dma_addr
,
4679 sizeof(struct ipw2100_rx_packet
),
4680 PCI_DMA_FROMDEVICE
);
4681 dev_kfree_skb(priv
->rx_buffers
[j
].skb
);
4684 kfree(priv
->rx_buffers
);
4685 priv
->rx_buffers
= NULL
;
4687 bd_queue_free(priv
, &priv
->rx_queue
);
4689 status_queue_free(priv
);
4694 static void ipw2100_rx_initialize(struct ipw2100_priv
*priv
)
4696 IPW_DEBUG_INFO("enter\n");
4698 priv
->rx_queue
.oldest
= 0;
4699 priv
->rx_queue
.available
= priv
->rx_queue
.entries
- 1;
4700 priv
->rx_queue
.next
= priv
->rx_queue
.entries
- 1;
4702 INIT_STAT(&priv
->rxq_stat
);
4703 SET_STAT(&priv
->rxq_stat
, priv
->rx_queue
.available
);
4705 bd_queue_initialize(priv
, &priv
->rx_queue
,
4706 IPW_MEM_HOST_SHARED_RX_BD_BASE
,
4707 IPW_MEM_HOST_SHARED_RX_BD_SIZE
,
4708 IPW_MEM_HOST_SHARED_RX_READ_INDEX
,
4709 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
);
4711 /* set up the status queue */
4712 write_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_STATUS_BASE
,
4713 priv
->status_queue
.nic
);
4715 IPW_DEBUG_INFO("exit\n");
4718 static void ipw2100_rx_free(struct ipw2100_priv
*priv
)
4722 IPW_DEBUG_INFO("enter\n");
4724 bd_queue_free(priv
, &priv
->rx_queue
);
4725 status_queue_free(priv
);
4727 if (!priv
->rx_buffers
)
4730 for (i
= 0; i
< RX_QUEUE_LENGTH
; i
++) {
4731 if (priv
->rx_buffers
[i
].rxp
) {
4732 pci_unmap_single(priv
->pci_dev
,
4733 priv
->rx_buffers
[i
].dma_addr
,
4734 sizeof(struct ipw2100_rx
),
4735 PCI_DMA_FROMDEVICE
);
4736 dev_kfree_skb(priv
->rx_buffers
[i
].skb
);
4740 kfree(priv
->rx_buffers
);
4741 priv
->rx_buffers
= NULL
;
4743 IPW_DEBUG_INFO("exit\n");
4746 static int ipw2100_read_mac_address(struct ipw2100_priv
*priv
)
4748 u32 length
= ETH_ALEN
;
4753 err
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ADAPTER_MAC
, addr
, &length
);
4755 IPW_DEBUG_INFO("MAC address read failed\n");
4759 memcpy(priv
->net_dev
->dev_addr
, addr
, ETH_ALEN
);
4760 IPW_DEBUG_INFO("card MAC is %pM\n", priv
->net_dev
->dev_addr
);
4765 /********************************************************************
4769 ********************************************************************/
4771 static int ipw2100_set_mac_address(struct ipw2100_priv
*priv
, int batch_mode
)
4773 struct host_command cmd
= {
4774 .host_command
= ADAPTER_ADDRESS
,
4775 .host_command_sequence
= 0,
4776 .host_command_length
= ETH_ALEN
4780 IPW_DEBUG_HC("SET_MAC_ADDRESS\n");
4782 IPW_DEBUG_INFO("enter\n");
4784 if (priv
->config
& CFG_CUSTOM_MAC
) {
4785 memcpy(cmd
.host_command_parameters
, priv
->mac_addr
, ETH_ALEN
);
4786 memcpy(priv
->net_dev
->dev_addr
, priv
->mac_addr
, ETH_ALEN
);
4788 memcpy(cmd
.host_command_parameters
, priv
->net_dev
->dev_addr
,
4791 err
= ipw2100_hw_send_command(priv
, &cmd
);
4793 IPW_DEBUG_INFO("exit\n");
4797 static int ipw2100_set_port_type(struct ipw2100_priv
*priv
, u32 port_type
,
4800 struct host_command cmd
= {
4801 .host_command
= PORT_TYPE
,
4802 .host_command_sequence
= 0,
4803 .host_command_length
= sizeof(u32
)
4807 switch (port_type
) {
4809 cmd
.host_command_parameters
[0] = IPW_BSS
;
4812 cmd
.host_command_parameters
[0] = IPW_IBSS
;
4816 IPW_DEBUG_HC("PORT_TYPE: %s\n",
4817 port_type
== IPW_IBSS
? "Ad-Hoc" : "Managed");
4820 err
= ipw2100_disable_adapter(priv
);
4822 printk(KERN_ERR DRV_NAME
4823 ": %s: Could not disable adapter %d\n",
4824 priv
->net_dev
->name
, err
);
4829 /* send cmd to firmware */
4830 err
= ipw2100_hw_send_command(priv
, &cmd
);
4833 ipw2100_enable_adapter(priv
);
4838 static int ipw2100_set_channel(struct ipw2100_priv
*priv
, u32 channel
,
4841 struct host_command cmd
= {
4842 .host_command
= CHANNEL
,
4843 .host_command_sequence
= 0,
4844 .host_command_length
= sizeof(u32
)
4848 cmd
.host_command_parameters
[0] = channel
;
4850 IPW_DEBUG_HC("CHANNEL: %d\n", channel
);
4852 /* If BSS then we don't support channel selection */
4853 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
)
4856 if ((channel
!= 0) &&
4857 ((channel
< REG_MIN_CHANNEL
) || (channel
> REG_MAX_CHANNEL
)))
4861 err
= ipw2100_disable_adapter(priv
);
4866 err
= ipw2100_hw_send_command(priv
, &cmd
);
4868 IPW_DEBUG_INFO("Failed to set channel to %d", channel
);
4873 priv
->config
|= CFG_STATIC_CHANNEL
;
4875 priv
->config
&= ~CFG_STATIC_CHANNEL
;
4877 priv
->channel
= channel
;
4880 err
= ipw2100_enable_adapter(priv
);
4888 static int ipw2100_system_config(struct ipw2100_priv
*priv
, int batch_mode
)
4890 struct host_command cmd
= {
4891 .host_command
= SYSTEM_CONFIG
,
4892 .host_command_sequence
= 0,
4893 .host_command_length
= 12,
4895 u32 ibss_mask
, len
= sizeof(u32
);
4898 /* Set system configuration */
4901 err
= ipw2100_disable_adapter(priv
);
4906 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
)
4907 cmd
.host_command_parameters
[0] |= IPW_CFG_IBSS_AUTO_START
;
4909 cmd
.host_command_parameters
[0] |= IPW_CFG_IBSS_MASK
|
4910 IPW_CFG_BSS_MASK
| IPW_CFG_802_1x_ENABLE
;
4912 if (!(priv
->config
& CFG_LONG_PREAMBLE
))
4913 cmd
.host_command_parameters
[0] |= IPW_CFG_PREAMBLE_AUTO
;
4915 err
= ipw2100_get_ordinal(priv
,
4916 IPW_ORD_EEPROM_IBSS_11B_CHANNELS
,
4919 ibss_mask
= IPW_IBSS_11B_DEFAULT_MASK
;
4921 cmd
.host_command_parameters
[1] = REG_CHANNEL_MASK
;
4922 cmd
.host_command_parameters
[2] = REG_CHANNEL_MASK
& ibss_mask
;
4925 /*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A; */
4927 err
= ipw2100_hw_send_command(priv
, &cmd
);
4931 /* If IPv6 is configured in the kernel then we don't want to filter out all
4932 * of the multicast packets as IPv6 needs some. */
4933 #if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE)
4934 cmd
.host_command
= ADD_MULTICAST
;
4935 cmd
.host_command_sequence
= 0;
4936 cmd
.host_command_length
= 0;
4938 ipw2100_hw_send_command(priv
, &cmd
);
4941 err
= ipw2100_enable_adapter(priv
);
4949 static int ipw2100_set_tx_rates(struct ipw2100_priv
*priv
, u32 rate
,
4952 struct host_command cmd
= {
4953 .host_command
= BASIC_TX_RATES
,
4954 .host_command_sequence
= 0,
4955 .host_command_length
= 4
4959 cmd
.host_command_parameters
[0] = rate
& TX_RATE_MASK
;
4962 err
= ipw2100_disable_adapter(priv
);
4967 /* Set BASIC TX Rate first */
4968 ipw2100_hw_send_command(priv
, &cmd
);
4971 cmd
.host_command
= TX_RATES
;
4972 ipw2100_hw_send_command(priv
, &cmd
);
4974 /* Set MSDU TX Rate */
4975 cmd
.host_command
= MSDU_TX_RATES
;
4976 ipw2100_hw_send_command(priv
, &cmd
);
4979 err
= ipw2100_enable_adapter(priv
);
4984 priv
->tx_rates
= rate
;
4989 static int ipw2100_set_power_mode(struct ipw2100_priv
*priv
, int power_level
)
4991 struct host_command cmd
= {
4992 .host_command
= POWER_MODE
,
4993 .host_command_sequence
= 0,
4994 .host_command_length
= 4
4998 cmd
.host_command_parameters
[0] = power_level
;
5000 err
= ipw2100_hw_send_command(priv
, &cmd
);
5004 if (power_level
== IPW_POWER_MODE_CAM
)
5005 priv
->power_mode
= IPW_POWER_LEVEL(priv
->power_mode
);
5007 priv
->power_mode
= IPW_POWER_ENABLED
| power_level
;
5009 #ifdef IPW2100_TX_POWER
5010 if (priv
->port_type
== IBSS
&& priv
->adhoc_power
!= DFTL_IBSS_TX_POWER
) {
5011 /* Set beacon interval */
5012 cmd
.host_command
= TX_POWER_INDEX
;
5013 cmd
.host_command_parameters
[0] = (u32
) priv
->adhoc_power
;
5015 err
= ipw2100_hw_send_command(priv
, &cmd
);
5024 static int ipw2100_set_rts_threshold(struct ipw2100_priv
*priv
, u32 threshold
)
5026 struct host_command cmd
= {
5027 .host_command
= RTS_THRESHOLD
,
5028 .host_command_sequence
= 0,
5029 .host_command_length
= 4
5033 if (threshold
& RTS_DISABLED
)
5034 cmd
.host_command_parameters
[0] = MAX_RTS_THRESHOLD
;
5036 cmd
.host_command_parameters
[0] = threshold
& ~RTS_DISABLED
;
5038 err
= ipw2100_hw_send_command(priv
, &cmd
);
5042 priv
->rts_threshold
= threshold
;
5048 int ipw2100_set_fragmentation_threshold(struct ipw2100_priv
*priv
,
5049 u32 threshold
, int batch_mode
)
5051 struct host_command cmd
= {
5052 .host_command
= FRAG_THRESHOLD
,
5053 .host_command_sequence
= 0,
5054 .host_command_length
= 4,
5055 .host_command_parameters
[0] = 0,
5060 err
= ipw2100_disable_adapter(priv
);
5066 threshold
= DEFAULT_FRAG_THRESHOLD
;
5068 threshold
= max(threshold
, MIN_FRAG_THRESHOLD
);
5069 threshold
= min(threshold
, MAX_FRAG_THRESHOLD
);
5072 cmd
.host_command_parameters
[0] = threshold
;
5074 IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n", threshold
);
5076 err
= ipw2100_hw_send_command(priv
, &cmd
);
5079 ipw2100_enable_adapter(priv
);
5082 priv
->frag_threshold
= threshold
;
5088 static int ipw2100_set_short_retry(struct ipw2100_priv
*priv
, u32 retry
)
5090 struct host_command cmd
= {
5091 .host_command
= SHORT_RETRY_LIMIT
,
5092 .host_command_sequence
= 0,
5093 .host_command_length
= 4
5097 cmd
.host_command_parameters
[0] = retry
;
5099 err
= ipw2100_hw_send_command(priv
, &cmd
);
5103 priv
->short_retry_limit
= retry
;
5108 static int ipw2100_set_long_retry(struct ipw2100_priv
*priv
, u32 retry
)
5110 struct host_command cmd
= {
5111 .host_command
= LONG_RETRY_LIMIT
,
5112 .host_command_sequence
= 0,
5113 .host_command_length
= 4
5117 cmd
.host_command_parameters
[0] = retry
;
5119 err
= ipw2100_hw_send_command(priv
, &cmd
);
5123 priv
->long_retry_limit
= retry
;
5128 static int ipw2100_set_mandatory_bssid(struct ipw2100_priv
*priv
, u8
* bssid
,
5131 struct host_command cmd
= {
5132 .host_command
= MANDATORY_BSSID
,
5133 .host_command_sequence
= 0,
5134 .host_command_length
= (bssid
== NULL
) ? 0 : ETH_ALEN
5138 #ifdef CONFIG_IPW2100_DEBUG
5140 IPW_DEBUG_HC("MANDATORY_BSSID: %pM\n", bssid
);
5142 IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n");
5144 /* if BSSID is empty then we disable mandatory bssid mode */
5146 memcpy(cmd
.host_command_parameters
, bssid
, ETH_ALEN
);
5149 err
= ipw2100_disable_adapter(priv
);
5154 err
= ipw2100_hw_send_command(priv
, &cmd
);
5157 ipw2100_enable_adapter(priv
);
5162 static int ipw2100_disassociate_bssid(struct ipw2100_priv
*priv
)
5164 struct host_command cmd
= {
5165 .host_command
= DISASSOCIATION_BSSID
,
5166 .host_command_sequence
= 0,
5167 .host_command_length
= ETH_ALEN
5172 IPW_DEBUG_HC("DISASSOCIATION_BSSID\n");
5175 /* The Firmware currently ignores the BSSID and just disassociates from
5176 * the currently associated AP -- but in the off chance that a future
5177 * firmware does use the BSSID provided here, we go ahead and try and
5178 * set it to the currently associated AP's BSSID */
5179 memcpy(cmd
.host_command_parameters
, priv
->bssid
, ETH_ALEN
);
5181 err
= ipw2100_hw_send_command(priv
, &cmd
);
5186 static int ipw2100_set_wpa_ie(struct ipw2100_priv
*,
5187 struct ipw2100_wpa_assoc_frame
*, int)
5188 __attribute__ ((unused
));
5190 static int ipw2100_set_wpa_ie(struct ipw2100_priv
*priv
,
5191 struct ipw2100_wpa_assoc_frame
*wpa_frame
,
5194 struct host_command cmd
= {
5195 .host_command
= SET_WPA_IE
,
5196 .host_command_sequence
= 0,
5197 .host_command_length
= sizeof(struct ipw2100_wpa_assoc_frame
),
5201 IPW_DEBUG_HC("SET_WPA_IE\n");
5204 err
= ipw2100_disable_adapter(priv
);
5209 memcpy(cmd
.host_command_parameters
, wpa_frame
,
5210 sizeof(struct ipw2100_wpa_assoc_frame
));
5212 err
= ipw2100_hw_send_command(priv
, &cmd
);
5215 if (ipw2100_enable_adapter(priv
))
5222 struct security_info_params
{
5223 u32 allowed_ciphers
;
5226 u8 replay_counters_number
;
5227 u8 unicast_using_group
;
5230 static int ipw2100_set_security_information(struct ipw2100_priv
*priv
,
5233 int unicast_using_group
,
5236 struct host_command cmd
= {
5237 .host_command
= SET_SECURITY_INFORMATION
,
5238 .host_command_sequence
= 0,
5239 .host_command_length
= sizeof(struct security_info_params
)
5241 struct security_info_params
*security
=
5242 (struct security_info_params
*)&cmd
.host_command_parameters
;
5244 memset(security
, 0, sizeof(*security
));
5246 /* If shared key AP authentication is turned on, then we need to
5247 * configure the firmware to try and use it.
5249 * Actual data encryption/decryption is handled by the host. */
5250 security
->auth_mode
= auth_mode
;
5251 security
->unicast_using_group
= unicast_using_group
;
5253 switch (security_level
) {
5256 security
->allowed_ciphers
= IPW_NONE_CIPHER
;
5259 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5263 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5264 IPW_WEP104_CIPHER
| IPW_TKIP_CIPHER
;
5266 case SEC_LEVEL_2_CKIP
:
5267 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5268 IPW_WEP104_CIPHER
| IPW_CKIP_CIPHER
;
5271 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5272 IPW_WEP104_CIPHER
| IPW_TKIP_CIPHER
| IPW_CCMP_CIPHER
;
5277 ("SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n",
5278 security
->auth_mode
, security
->allowed_ciphers
, security_level
);
5280 security
->replay_counters_number
= 0;
5283 err
= ipw2100_disable_adapter(priv
);
5288 err
= ipw2100_hw_send_command(priv
, &cmd
);
5291 ipw2100_enable_adapter(priv
);
5296 static int ipw2100_set_tx_power(struct ipw2100_priv
*priv
, u32 tx_power
)
5298 struct host_command cmd
= {
5299 .host_command
= TX_POWER_INDEX
,
5300 .host_command_sequence
= 0,
5301 .host_command_length
= 4
5306 if (tx_power
!= IPW_TX_POWER_DEFAULT
)
5307 tmp
= (tx_power
- IPW_TX_POWER_MIN_DBM
) * 16 /
5308 (IPW_TX_POWER_MAX_DBM
- IPW_TX_POWER_MIN_DBM
);
5310 cmd
.host_command_parameters
[0] = tmp
;
5312 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
)
5313 err
= ipw2100_hw_send_command(priv
, &cmd
);
5315 priv
->tx_power
= tx_power
;
5320 static int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv
*priv
,
5321 u32 interval
, int batch_mode
)
5323 struct host_command cmd
= {
5324 .host_command
= BEACON_INTERVAL
,
5325 .host_command_sequence
= 0,
5326 .host_command_length
= 4
5330 cmd
.host_command_parameters
[0] = interval
;
5332 IPW_DEBUG_INFO("enter\n");
5334 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5336 err
= ipw2100_disable_adapter(priv
);
5341 ipw2100_hw_send_command(priv
, &cmd
);
5344 err
= ipw2100_enable_adapter(priv
);
5350 IPW_DEBUG_INFO("exit\n");
5355 static void ipw2100_queues_initialize(struct ipw2100_priv
*priv
)
5357 ipw2100_tx_initialize(priv
);
5358 ipw2100_rx_initialize(priv
);
5359 ipw2100_msg_initialize(priv
);
5362 static void ipw2100_queues_free(struct ipw2100_priv
*priv
)
5364 ipw2100_tx_free(priv
);
5365 ipw2100_rx_free(priv
);
5366 ipw2100_msg_free(priv
);
5369 static int ipw2100_queues_allocate(struct ipw2100_priv
*priv
)
5371 if (ipw2100_tx_allocate(priv
) ||
5372 ipw2100_rx_allocate(priv
) || ipw2100_msg_allocate(priv
))
5378 ipw2100_tx_free(priv
);
5379 ipw2100_rx_free(priv
);
5380 ipw2100_msg_free(priv
);
5384 #define IPW_PRIVACY_CAPABLE 0x0008
5386 static int ipw2100_set_wep_flags(struct ipw2100_priv
*priv
, u32 flags
,
5389 struct host_command cmd
= {
5390 .host_command
= WEP_FLAGS
,
5391 .host_command_sequence
= 0,
5392 .host_command_length
= 4
5396 cmd
.host_command_parameters
[0] = flags
;
5398 IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n", flags
);
5401 err
= ipw2100_disable_adapter(priv
);
5403 printk(KERN_ERR DRV_NAME
5404 ": %s: Could not disable adapter %d\n",
5405 priv
->net_dev
->name
, err
);
5410 /* send cmd to firmware */
5411 err
= ipw2100_hw_send_command(priv
, &cmd
);
5414 ipw2100_enable_adapter(priv
);
5419 struct ipw2100_wep_key
{
5425 /* Macros to ease up priting WEP keys */
5426 #define WEP_FMT_64 "%02X%02X%02X%02X-%02X"
5427 #define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X"
5428 #define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4]
5429 #define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10]
5434 * @priv: struct to work on
5435 * @idx: index of the key we want to set
5436 * @key: ptr to the key data to set
5437 * @len: length of the buffer at @key
5438 * @batch_mode: FIXME perform the operation in batch mode, not
5439 * disabling the device.
5441 * @returns 0 if OK, < 0 errno code on error.
5443 * Fill out a command structure with the new wep key, length an
5444 * index and send it down the wire.
5446 static int ipw2100_set_key(struct ipw2100_priv
*priv
,
5447 int idx
, char *key
, int len
, int batch_mode
)
5449 int keylen
= len
? (len
<= 5 ? 5 : 13) : 0;
5450 struct host_command cmd
= {
5451 .host_command
= WEP_KEY_INFO
,
5452 .host_command_sequence
= 0,
5453 .host_command_length
= sizeof(struct ipw2100_wep_key
),
5455 struct ipw2100_wep_key
*wep_key
= (void *)cmd
.host_command_parameters
;
5458 IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n",
5461 /* NOTE: We don't check cached values in case the firmware was reset
5462 * or some other problem is occurring. If the user is setting the key,
5463 * then we push the change */
5466 wep_key
->len
= keylen
;
5469 memcpy(wep_key
->key
, key
, len
);
5470 memset(wep_key
->key
+ len
, 0, keylen
- len
);
5473 /* Will be optimized out on debug not being configured in */
5475 IPW_DEBUG_WEP("%s: Clearing key %d\n",
5476 priv
->net_dev
->name
, wep_key
->idx
);
5477 else if (keylen
== 5)
5478 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64
"\n",
5479 priv
->net_dev
->name
, wep_key
->idx
, wep_key
->len
,
5480 WEP_STR_64(wep_key
->key
));
5482 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128
5484 priv
->net_dev
->name
, wep_key
->idx
, wep_key
->len
,
5485 WEP_STR_128(wep_key
->key
));
5488 err
= ipw2100_disable_adapter(priv
);
5489 /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */
5491 printk(KERN_ERR DRV_NAME
5492 ": %s: Could not disable adapter %d\n",
5493 priv
->net_dev
->name
, err
);
5498 /* send cmd to firmware */
5499 err
= ipw2100_hw_send_command(priv
, &cmd
);
5502 int err2
= ipw2100_enable_adapter(priv
);
5509 static int ipw2100_set_key_index(struct ipw2100_priv
*priv
,
5510 int idx
, int batch_mode
)
5512 struct host_command cmd
= {
5513 .host_command
= WEP_KEY_INDEX
,
5514 .host_command_sequence
= 0,
5515 .host_command_length
= 4,
5516 .host_command_parameters
= {idx
},
5520 IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n", idx
);
5522 if (idx
< 0 || idx
> 3)
5526 err
= ipw2100_disable_adapter(priv
);
5528 printk(KERN_ERR DRV_NAME
5529 ": %s: Could not disable adapter %d\n",
5530 priv
->net_dev
->name
, err
);
5535 /* send cmd to firmware */
5536 err
= ipw2100_hw_send_command(priv
, &cmd
);
5539 ipw2100_enable_adapter(priv
);
5544 static int ipw2100_configure_security(struct ipw2100_priv
*priv
, int batch_mode
)
5546 int i
, err
, auth_mode
, sec_level
, use_group
;
5548 if (!(priv
->status
& STATUS_RUNNING
))
5552 err
= ipw2100_disable_adapter(priv
);
5557 if (!priv
->ieee
->sec
.enabled
) {
5559 ipw2100_set_security_information(priv
, IPW_AUTH_OPEN
,
5562 auth_mode
= IPW_AUTH_OPEN
;
5563 if (priv
->ieee
->sec
.flags
& SEC_AUTH_MODE
) {
5564 if (priv
->ieee
->sec
.auth_mode
== WLAN_AUTH_SHARED_KEY
)
5565 auth_mode
= IPW_AUTH_SHARED
;
5566 else if (priv
->ieee
->sec
.auth_mode
== WLAN_AUTH_LEAP
)
5567 auth_mode
= IPW_AUTH_LEAP_CISCO_ID
;
5570 sec_level
= SEC_LEVEL_0
;
5571 if (priv
->ieee
->sec
.flags
& SEC_LEVEL
)
5572 sec_level
= priv
->ieee
->sec
.level
;
5575 if (priv
->ieee
->sec
.flags
& SEC_UNICAST_GROUP
)
5576 use_group
= priv
->ieee
->sec
.unicast_uses_group
;
5579 ipw2100_set_security_information(priv
, auth_mode
, sec_level
,
5586 if (priv
->ieee
->sec
.enabled
) {
5587 for (i
= 0; i
< 4; i
++) {
5588 if (!(priv
->ieee
->sec
.flags
& (1 << i
))) {
5589 memset(priv
->ieee
->sec
.keys
[i
], 0, WEP_KEY_LEN
);
5590 priv
->ieee
->sec
.key_sizes
[i
] = 0;
5592 err
= ipw2100_set_key(priv
, i
,
5593 priv
->ieee
->sec
.keys
[i
],
5601 ipw2100_set_key_index(priv
, priv
->ieee
->crypt_info
.tx_keyidx
, 1);
5604 /* Always enable privacy so the Host can filter WEP packets if
5605 * encrypted data is sent up */
5607 ipw2100_set_wep_flags(priv
,
5609 enabled
? IPW_PRIVACY_CAPABLE
: 0, 1);
5613 priv
->status
&= ~STATUS_SECURITY_UPDATED
;
5617 ipw2100_enable_adapter(priv
);
5622 static void ipw2100_security_work(struct work_struct
*work
)
5624 struct ipw2100_priv
*priv
=
5625 container_of(work
, struct ipw2100_priv
, security_work
.work
);
5627 /* If we happen to have reconnected before we get a chance to
5628 * process this, then update the security settings--which causes
5629 * a disassociation to occur */
5630 if (!(priv
->status
& STATUS_ASSOCIATED
) &&
5631 priv
->status
& STATUS_SECURITY_UPDATED
)
5632 ipw2100_configure_security(priv
, 0);
5635 static void shim__set_security(struct net_device
*dev
,
5636 struct libipw_security
*sec
)
5638 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5639 int i
, force_update
= 0;
5641 mutex_lock(&priv
->action_mutex
);
5642 if (!(priv
->status
& STATUS_INITIALIZED
))
5645 for (i
= 0; i
< 4; i
++) {
5646 if (sec
->flags
& (1 << i
)) {
5647 priv
->ieee
->sec
.key_sizes
[i
] = sec
->key_sizes
[i
];
5648 if (sec
->key_sizes
[i
] == 0)
5649 priv
->ieee
->sec
.flags
&= ~(1 << i
);
5651 memcpy(priv
->ieee
->sec
.keys
[i
], sec
->keys
[i
],
5653 if (sec
->level
== SEC_LEVEL_1
) {
5654 priv
->ieee
->sec
.flags
|= (1 << i
);
5655 priv
->status
|= STATUS_SECURITY_UPDATED
;
5657 priv
->ieee
->sec
.flags
&= ~(1 << i
);
5661 if ((sec
->flags
& SEC_ACTIVE_KEY
) &&
5662 priv
->ieee
->sec
.active_key
!= sec
->active_key
) {
5663 if (sec
->active_key
<= 3) {
5664 priv
->ieee
->sec
.active_key
= sec
->active_key
;
5665 priv
->ieee
->sec
.flags
|= SEC_ACTIVE_KEY
;
5667 priv
->ieee
->sec
.flags
&= ~SEC_ACTIVE_KEY
;
5669 priv
->status
|= STATUS_SECURITY_UPDATED
;
5672 if ((sec
->flags
& SEC_AUTH_MODE
) &&
5673 (priv
->ieee
->sec
.auth_mode
!= sec
->auth_mode
)) {
5674 priv
->ieee
->sec
.auth_mode
= sec
->auth_mode
;
5675 priv
->ieee
->sec
.flags
|= SEC_AUTH_MODE
;
5676 priv
->status
|= STATUS_SECURITY_UPDATED
;
5679 if (sec
->flags
& SEC_ENABLED
&& priv
->ieee
->sec
.enabled
!= sec
->enabled
) {
5680 priv
->ieee
->sec
.flags
|= SEC_ENABLED
;
5681 priv
->ieee
->sec
.enabled
= sec
->enabled
;
5682 priv
->status
|= STATUS_SECURITY_UPDATED
;
5686 if (sec
->flags
& SEC_ENCRYPT
)
5687 priv
->ieee
->sec
.encrypt
= sec
->encrypt
;
5689 if (sec
->flags
& SEC_LEVEL
&& priv
->ieee
->sec
.level
!= sec
->level
) {
5690 priv
->ieee
->sec
.level
= sec
->level
;
5691 priv
->ieee
->sec
.flags
|= SEC_LEVEL
;
5692 priv
->status
|= STATUS_SECURITY_UPDATED
;
5695 IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n",
5696 priv
->ieee
->sec
.flags
& (1 << 8) ? '1' : '0',
5697 priv
->ieee
->sec
.flags
& (1 << 7) ? '1' : '0',
5698 priv
->ieee
->sec
.flags
& (1 << 6) ? '1' : '0',
5699 priv
->ieee
->sec
.flags
& (1 << 5) ? '1' : '0',
5700 priv
->ieee
->sec
.flags
& (1 << 4) ? '1' : '0',
5701 priv
->ieee
->sec
.flags
& (1 << 3) ? '1' : '0',
5702 priv
->ieee
->sec
.flags
& (1 << 2) ? '1' : '0',
5703 priv
->ieee
->sec
.flags
& (1 << 1) ? '1' : '0',
5704 priv
->ieee
->sec
.flags
& (1 << 0) ? '1' : '0');
5706 /* As a temporary work around to enable WPA until we figure out why
5707 * wpa_supplicant toggles the security capability of the driver, which
5708 * forces a disassocation with force_update...
5710 * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/
5711 if (!(priv
->status
& (STATUS_ASSOCIATED
| STATUS_ASSOCIATING
)))
5712 ipw2100_configure_security(priv
, 0);
5714 mutex_unlock(&priv
->action_mutex
);
5717 static int ipw2100_adapter_setup(struct ipw2100_priv
*priv
)
5723 IPW_DEBUG_INFO("enter\n");
5725 err
= ipw2100_disable_adapter(priv
);
5728 #ifdef CONFIG_IPW2100_MONITOR
5729 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
5730 err
= ipw2100_set_channel(priv
, priv
->channel
, batch_mode
);
5734 IPW_DEBUG_INFO("exit\n");
5738 #endif /* CONFIG_IPW2100_MONITOR */
5740 err
= ipw2100_read_mac_address(priv
);
5744 err
= ipw2100_set_mac_address(priv
, batch_mode
);
5748 err
= ipw2100_set_port_type(priv
, priv
->ieee
->iw_mode
, batch_mode
);
5752 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5753 err
= ipw2100_set_channel(priv
, priv
->channel
, batch_mode
);
5758 err
= ipw2100_system_config(priv
, batch_mode
);
5762 err
= ipw2100_set_tx_rates(priv
, priv
->tx_rates
, batch_mode
);
5766 /* Default to power mode OFF */
5767 err
= ipw2100_set_power_mode(priv
, IPW_POWER_MODE_CAM
);
5771 err
= ipw2100_set_rts_threshold(priv
, priv
->rts_threshold
);
5775 if (priv
->config
& CFG_STATIC_BSSID
)
5776 bssid
= priv
->bssid
;
5779 err
= ipw2100_set_mandatory_bssid(priv
, bssid
, batch_mode
);
5783 if (priv
->config
& CFG_STATIC_ESSID
)
5784 err
= ipw2100_set_essid(priv
, priv
->essid
, priv
->essid_len
,
5787 err
= ipw2100_set_essid(priv
, NULL
, 0, batch_mode
);
5791 err
= ipw2100_configure_security(priv
, batch_mode
);
5795 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5797 ipw2100_set_ibss_beacon_interval(priv
,
5798 priv
->beacon_interval
,
5803 err
= ipw2100_set_tx_power(priv
, priv
->tx_power
);
5809 err = ipw2100_set_fragmentation_threshold(
5810 priv, priv->frag_threshold, batch_mode);
5815 IPW_DEBUG_INFO("exit\n");
5820 /*************************************************************************
5822 * EXTERNALLY CALLED METHODS
5824 *************************************************************************/
5826 /* This method is called by the network layer -- not to be confused with
5827 * ipw2100_set_mac_address() declared above called by this driver (and this
5828 * method as well) to talk to the firmware */
5829 static int ipw2100_set_address(struct net_device
*dev
, void *p
)
5831 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5832 struct sockaddr
*addr
= p
;
5835 if (!is_valid_ether_addr(addr
->sa_data
))
5836 return -EADDRNOTAVAIL
;
5838 mutex_lock(&priv
->action_mutex
);
5840 priv
->config
|= CFG_CUSTOM_MAC
;
5841 memcpy(priv
->mac_addr
, addr
->sa_data
, ETH_ALEN
);
5843 err
= ipw2100_set_mac_address(priv
, 0);
5847 priv
->reset_backoff
= 0;
5848 mutex_unlock(&priv
->action_mutex
);
5849 ipw2100_reset_adapter(&priv
->reset_work
.work
);
5853 mutex_unlock(&priv
->action_mutex
);
5857 static int ipw2100_open(struct net_device
*dev
)
5859 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5860 unsigned long flags
;
5861 IPW_DEBUG_INFO("dev->open\n");
5863 spin_lock_irqsave(&priv
->low_lock
, flags
);
5864 if (priv
->status
& STATUS_ASSOCIATED
) {
5865 netif_carrier_on(dev
);
5866 netif_start_queue(dev
);
5868 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
5873 static int ipw2100_close(struct net_device
*dev
)
5875 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5876 unsigned long flags
;
5877 struct list_head
*element
;
5878 struct ipw2100_tx_packet
*packet
;
5880 IPW_DEBUG_INFO("enter\n");
5882 spin_lock_irqsave(&priv
->low_lock
, flags
);
5884 if (priv
->status
& STATUS_ASSOCIATED
)
5885 netif_carrier_off(dev
);
5886 netif_stop_queue(dev
);
5888 /* Flush the TX queue ... */
5889 while (!list_empty(&priv
->tx_pend_list
)) {
5890 element
= priv
->tx_pend_list
.next
;
5891 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
5894 DEC_STAT(&priv
->tx_pend_stat
);
5896 libipw_txb_free(packet
->info
.d_struct
.txb
);
5897 packet
->info
.d_struct
.txb
= NULL
;
5899 list_add_tail(element
, &priv
->tx_free_list
);
5900 INC_STAT(&priv
->tx_free_stat
);
5902 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
5904 IPW_DEBUG_INFO("exit\n");
5910 * TODO: Fix this function... its just wrong
5912 static void ipw2100_tx_timeout(struct net_device
*dev
)
5914 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5916 dev
->stats
.tx_errors
++;
5918 #ifdef CONFIG_IPW2100_MONITOR
5919 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
5923 IPW_DEBUG_INFO("%s: TX timed out. Scheduling firmware restart.\n",
5925 schedule_reset(priv
);
5928 static int ipw2100_wpa_enable(struct ipw2100_priv
*priv
, int value
)
5930 /* This is called when wpa_supplicant loads and closes the driver
5932 priv
->ieee
->wpa_enabled
= value
;
5936 static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv
*priv
, int value
)
5939 struct libipw_device
*ieee
= priv
->ieee
;
5940 struct libipw_security sec
= {
5941 .flags
= SEC_AUTH_MODE
,
5945 if (value
& IW_AUTH_ALG_SHARED_KEY
) {
5946 sec
.auth_mode
= WLAN_AUTH_SHARED_KEY
;
5948 } else if (value
& IW_AUTH_ALG_OPEN_SYSTEM
) {
5949 sec
.auth_mode
= WLAN_AUTH_OPEN
;
5951 } else if (value
& IW_AUTH_ALG_LEAP
) {
5952 sec
.auth_mode
= WLAN_AUTH_LEAP
;
5957 if (ieee
->set_security
)
5958 ieee
->set_security(ieee
->dev
, &sec
);
5965 static void ipw2100_wpa_assoc_frame(struct ipw2100_priv
*priv
,
5966 char *wpa_ie
, int wpa_ie_len
)
5969 struct ipw2100_wpa_assoc_frame frame
;
5971 frame
.fixed_ie_mask
= 0;
5974 memcpy(frame
.var_ie
, wpa_ie
, wpa_ie_len
);
5975 frame
.var_ie_len
= wpa_ie_len
;
5977 /* make sure WPA is enabled */
5978 ipw2100_wpa_enable(priv
, 1);
5979 ipw2100_set_wpa_ie(priv
, &frame
, 0);
5982 static void ipw_ethtool_get_drvinfo(struct net_device
*dev
,
5983 struct ethtool_drvinfo
*info
)
5985 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5986 char fw_ver
[64], ucode_ver
[64];
5988 strcpy(info
->driver
, DRV_NAME
);
5989 strcpy(info
->version
, DRV_VERSION
);
5991 ipw2100_get_fwversion(priv
, fw_ver
, sizeof(fw_ver
));
5992 ipw2100_get_ucodeversion(priv
, ucode_ver
, sizeof(ucode_ver
));
5994 snprintf(info
->fw_version
, sizeof(info
->fw_version
), "%s:%d:%s",
5995 fw_ver
, priv
->eeprom_version
, ucode_ver
);
5997 strcpy(info
->bus_info
, pci_name(priv
->pci_dev
));
6000 static u32
ipw2100_ethtool_get_link(struct net_device
*dev
)
6002 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6003 return (priv
->status
& STATUS_ASSOCIATED
) ? 1 : 0;
6006 static const struct ethtool_ops ipw2100_ethtool_ops
= {
6007 .get_link
= ipw2100_ethtool_get_link
,
6008 .get_drvinfo
= ipw_ethtool_get_drvinfo
,
6011 static void ipw2100_hang_check(struct work_struct
*work
)
6013 struct ipw2100_priv
*priv
=
6014 container_of(work
, struct ipw2100_priv
, hang_check
.work
);
6015 unsigned long flags
;
6016 u32 rtc
= 0xa5a5a5a5;
6017 u32 len
= sizeof(rtc
);
6020 spin_lock_irqsave(&priv
->low_lock
, flags
);
6022 if (priv
->fatal_error
!= 0) {
6023 /* If fatal_error is set then we need to restart */
6024 IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n",
6025 priv
->net_dev
->name
);
6028 } else if (ipw2100_get_ordinal(priv
, IPW_ORD_RTC_TIME
, &rtc
, &len
) ||
6029 (rtc
== priv
->last_rtc
)) {
6030 /* Check if firmware is hung */
6031 IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n",
6032 priv
->net_dev
->name
);
6039 priv
->stop_hang_check
= 1;
6042 /* Restart the NIC */
6043 schedule_reset(priv
);
6046 priv
->last_rtc
= rtc
;
6048 if (!priv
->stop_hang_check
)
6049 queue_delayed_work(priv
->workqueue
, &priv
->hang_check
, HZ
/ 2);
6051 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
6054 static void ipw2100_rf_kill(struct work_struct
*work
)
6056 struct ipw2100_priv
*priv
=
6057 container_of(work
, struct ipw2100_priv
, rf_kill
.work
);
6058 unsigned long flags
;
6060 spin_lock_irqsave(&priv
->low_lock
, flags
);
6062 if (rf_kill_active(priv
)) {
6063 IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n");
6064 if (!priv
->stop_rf_kill
)
6065 queue_delayed_work(priv
->workqueue
, &priv
->rf_kill
,
6066 round_jiffies_relative(HZ
));
6070 /* RF Kill is now disabled, so bring the device back up */
6072 if (!(priv
->status
& STATUS_RF_KILL_MASK
)) {
6073 IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting "
6075 schedule_reset(priv
);
6077 IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still "
6081 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
6084 static void ipw2100_irq_tasklet(struct ipw2100_priv
*priv
);
6086 static const struct net_device_ops ipw2100_netdev_ops
= {
6087 .ndo_open
= ipw2100_open
,
6088 .ndo_stop
= ipw2100_close
,
6089 .ndo_start_xmit
= libipw_xmit
,
6090 .ndo_change_mtu
= libipw_change_mtu
,
6091 .ndo_init
= ipw2100_net_init
,
6092 .ndo_tx_timeout
= ipw2100_tx_timeout
,
6093 .ndo_set_mac_address
= ipw2100_set_address
,
6094 .ndo_validate_addr
= eth_validate_addr
,
6097 /* Look into using netdev destructor to shutdown libipw? */
6099 static struct net_device
*ipw2100_alloc_device(struct pci_dev
*pci_dev
,
6100 void __iomem
* base_addr
,
6101 unsigned long mem_start
,
6102 unsigned long mem_len
)
6104 struct ipw2100_priv
*priv
;
6105 struct net_device
*dev
;
6107 dev
= alloc_libipw(sizeof(struct ipw2100_priv
), 0);
6110 priv
= libipw_priv(dev
);
6111 priv
->ieee
= netdev_priv(dev
);
6112 priv
->pci_dev
= pci_dev
;
6113 priv
->net_dev
= dev
;
6115 priv
->ieee
->hard_start_xmit
= ipw2100_tx
;
6116 priv
->ieee
->set_security
= shim__set_security
;
6118 priv
->ieee
->perfect_rssi
= -20;
6119 priv
->ieee
->worst_rssi
= -85;
6121 dev
->netdev_ops
= &ipw2100_netdev_ops
;
6122 dev
->ethtool_ops
= &ipw2100_ethtool_ops
;
6123 dev
->wireless_handlers
= &ipw2100_wx_handler_def
;
6124 priv
->wireless_data
.libipw
= priv
->ieee
;
6125 dev
->wireless_data
= &priv
->wireless_data
;
6126 dev
->watchdog_timeo
= 3 * HZ
;
6129 dev
->base_addr
= (unsigned long)base_addr
;
6130 dev
->mem_start
= mem_start
;
6131 dev
->mem_end
= dev
->mem_start
+ mem_len
- 1;
6133 /* NOTE: We don't use the wireless_handlers hook
6134 * in dev as the system will start throwing WX requests
6135 * to us before we're actually initialized and it just
6136 * ends up causing problems. So, we just handle
6137 * the WX extensions through the ipw2100_ioctl interface */
6139 /* memset() puts everything to 0, so we only have explicitly set
6140 * those values that need to be something else */
6142 /* If power management is turned on, default to AUTO mode */
6143 priv
->power_mode
= IPW_POWER_AUTO
;
6145 #ifdef CONFIG_IPW2100_MONITOR
6146 priv
->config
|= CFG_CRC_CHECK
;
6148 priv
->ieee
->wpa_enabled
= 0;
6149 priv
->ieee
->drop_unencrypted
= 0;
6150 priv
->ieee
->privacy_invoked
= 0;
6151 priv
->ieee
->ieee802_1x
= 1;
6153 /* Set module parameters */
6154 switch (network_mode
) {
6156 priv
->ieee
->iw_mode
= IW_MODE_ADHOC
;
6158 #ifdef CONFIG_IPW2100_MONITOR
6160 priv
->ieee
->iw_mode
= IW_MODE_MONITOR
;
6165 priv
->ieee
->iw_mode
= IW_MODE_INFRA
;
6170 priv
->status
|= STATUS_RF_KILL_SW
;
6173 ((channel
>= REG_MIN_CHANNEL
) && (channel
<= REG_MAX_CHANNEL
))) {
6174 priv
->config
|= CFG_STATIC_CHANNEL
;
6175 priv
->channel
= channel
;
6179 priv
->config
|= CFG_ASSOCIATE
;
6181 priv
->beacon_interval
= DEFAULT_BEACON_INTERVAL
;
6182 priv
->short_retry_limit
= DEFAULT_SHORT_RETRY_LIMIT
;
6183 priv
->long_retry_limit
= DEFAULT_LONG_RETRY_LIMIT
;
6184 priv
->rts_threshold
= DEFAULT_RTS_THRESHOLD
| RTS_DISABLED
;
6185 priv
->frag_threshold
= DEFAULT_FTS
| FRAG_DISABLED
;
6186 priv
->tx_power
= IPW_TX_POWER_DEFAULT
;
6187 priv
->tx_rates
= DEFAULT_TX_RATES
;
6189 strcpy(priv
->nick
, "ipw2100");
6191 spin_lock_init(&priv
->low_lock
);
6192 mutex_init(&priv
->action_mutex
);
6193 mutex_init(&priv
->adapter_mutex
);
6195 init_waitqueue_head(&priv
->wait_command_queue
);
6197 netif_carrier_off(dev
);
6199 INIT_LIST_HEAD(&priv
->msg_free_list
);
6200 INIT_LIST_HEAD(&priv
->msg_pend_list
);
6201 INIT_STAT(&priv
->msg_free_stat
);
6202 INIT_STAT(&priv
->msg_pend_stat
);
6204 INIT_LIST_HEAD(&priv
->tx_free_list
);
6205 INIT_LIST_HEAD(&priv
->tx_pend_list
);
6206 INIT_STAT(&priv
->tx_free_stat
);
6207 INIT_STAT(&priv
->tx_pend_stat
);
6209 INIT_LIST_HEAD(&priv
->fw_pend_list
);
6210 INIT_STAT(&priv
->fw_pend_stat
);
6212 priv
->workqueue
= create_workqueue(DRV_NAME
);
6214 INIT_DELAYED_WORK(&priv
->reset_work
, ipw2100_reset_adapter
);
6215 INIT_DELAYED_WORK(&priv
->security_work
, ipw2100_security_work
);
6216 INIT_DELAYED_WORK(&priv
->wx_event_work
, ipw2100_wx_event_work
);
6217 INIT_DELAYED_WORK(&priv
->hang_check
, ipw2100_hang_check
);
6218 INIT_DELAYED_WORK(&priv
->rf_kill
, ipw2100_rf_kill
);
6219 INIT_WORK(&priv
->scan_event_now
, ipw2100_scan_event_now
);
6220 INIT_DELAYED_WORK(&priv
->scan_event_later
, ipw2100_scan_event_later
);
6222 tasklet_init(&priv
->irq_tasklet
, (void (*)(unsigned long))
6223 ipw2100_irq_tasklet
, (unsigned long)priv
);
6225 /* NOTE: We do not start the deferred work for status checks yet */
6226 priv
->stop_rf_kill
= 1;
6227 priv
->stop_hang_check
= 1;
6232 static int ipw2100_pci_init_one(struct pci_dev
*pci_dev
,
6233 const struct pci_device_id
*ent
)
6235 unsigned long mem_start
, mem_len
, mem_flags
;
6236 void __iomem
*base_addr
= NULL
;
6237 struct net_device
*dev
= NULL
;
6238 struct ipw2100_priv
*priv
= NULL
;
6243 IPW_DEBUG_INFO("enter\n");
6245 mem_start
= pci_resource_start(pci_dev
, 0);
6246 mem_len
= pci_resource_len(pci_dev
, 0);
6247 mem_flags
= pci_resource_flags(pci_dev
, 0);
6249 if ((mem_flags
& IORESOURCE_MEM
) != IORESOURCE_MEM
) {
6250 IPW_DEBUG_INFO("weird - resource type is not memory\n");
6255 base_addr
= ioremap_nocache(mem_start
, mem_len
);
6257 printk(KERN_WARNING DRV_NAME
6258 "Error calling ioremap_nocache.\n");
6263 /* allocate and initialize our net_device */
6264 dev
= ipw2100_alloc_device(pci_dev
, base_addr
, mem_start
, mem_len
);
6266 printk(KERN_WARNING DRV_NAME
6267 "Error calling ipw2100_alloc_device.\n");
6272 /* set up PCI mappings for device */
6273 err
= pci_enable_device(pci_dev
);
6275 printk(KERN_WARNING DRV_NAME
6276 "Error calling pci_enable_device.\n");
6280 priv
= libipw_priv(dev
);
6282 pci_set_master(pci_dev
);
6283 pci_set_drvdata(pci_dev
, priv
);
6285 err
= pci_set_dma_mask(pci_dev
, DMA_BIT_MASK(32));
6287 printk(KERN_WARNING DRV_NAME
6288 "Error calling pci_set_dma_mask.\n");
6289 pci_disable_device(pci_dev
);
6293 err
= pci_request_regions(pci_dev
, DRV_NAME
);
6295 printk(KERN_WARNING DRV_NAME
6296 "Error calling pci_request_regions.\n");
6297 pci_disable_device(pci_dev
);
6301 /* We disable the RETRY_TIMEOUT register (0x41) to keep
6302 * PCI Tx retries from interfering with C3 CPU state */
6303 pci_read_config_dword(pci_dev
, 0x40, &val
);
6304 if ((val
& 0x0000ff00) != 0)
6305 pci_write_config_dword(pci_dev
, 0x40, val
& 0xffff00ff);
6307 pci_set_power_state(pci_dev
, PCI_D0
);
6309 if (!ipw2100_hw_is_adapter_in_system(dev
)) {
6310 printk(KERN_WARNING DRV_NAME
6311 "Device not found via register read.\n");
6316 SET_NETDEV_DEV(dev
, &pci_dev
->dev
);
6318 /* Force interrupts to be shut off on the device */
6319 priv
->status
|= STATUS_INT_ENABLED
;
6320 ipw2100_disable_interrupts(priv
);
6322 /* Allocate and initialize the Tx/Rx queues and lists */
6323 if (ipw2100_queues_allocate(priv
)) {
6324 printk(KERN_WARNING DRV_NAME
6325 "Error calling ipw2100_queues_allocate.\n");
6329 ipw2100_queues_initialize(priv
);
6331 err
= request_irq(pci_dev
->irq
,
6332 ipw2100_interrupt
, IRQF_SHARED
, dev
->name
, priv
);
6334 printk(KERN_WARNING DRV_NAME
6335 "Error calling request_irq: %d.\n", pci_dev
->irq
);
6338 dev
->irq
= pci_dev
->irq
;
6340 IPW_DEBUG_INFO("Attempting to register device...\n");
6342 printk(KERN_INFO DRV_NAME
6343 ": Detected Intel PRO/Wireless 2100 Network Connection\n");
6345 /* Bring up the interface. Pre 0.46, after we registered the
6346 * network device we would call ipw2100_up. This introduced a race
6347 * condition with newer hotplug configurations (network was coming
6348 * up and making calls before the device was initialized).
6350 * If we called ipw2100_up before we registered the device, then the
6351 * device name wasn't registered. So, we instead use the net_dev->init
6352 * member to call a function that then just turns and calls ipw2100_up.
6353 * net_dev->init is called after name allocation but before the
6354 * notifier chain is called */
6355 err
= register_netdev(dev
);
6357 printk(KERN_WARNING DRV_NAME
6358 "Error calling register_netdev.\n");
6362 mutex_lock(&priv
->action_mutex
);
6365 IPW_DEBUG_INFO("%s: Bound to %s\n", dev
->name
, pci_name(pci_dev
));
6367 /* perform this after register_netdev so that dev->name is set */
6368 err
= sysfs_create_group(&pci_dev
->dev
.kobj
, &ipw2100_attribute_group
);
6372 /* If the RF Kill switch is disabled, go ahead and complete the
6373 * startup sequence */
6374 if (!(priv
->status
& STATUS_RF_KILL_MASK
)) {
6375 /* Enable the adapter - sends HOST_COMPLETE */
6376 if (ipw2100_enable_adapter(priv
)) {
6377 printk(KERN_WARNING DRV_NAME
6378 ": %s: failed in call to enable adapter.\n",
6379 priv
->net_dev
->name
);
6380 ipw2100_hw_stop_adapter(priv
);
6385 /* Start a scan . . . */
6386 ipw2100_set_scan_options(priv
);
6387 ipw2100_start_scan(priv
);
6390 IPW_DEBUG_INFO("exit\n");
6392 priv
->status
|= STATUS_INITIALIZED
;
6394 mutex_unlock(&priv
->action_mutex
);
6399 mutex_unlock(&priv
->action_mutex
);
6404 unregister_netdev(dev
);
6406 ipw2100_hw_stop_adapter(priv
);
6408 ipw2100_disable_interrupts(priv
);
6411 free_irq(dev
->irq
, priv
);
6413 ipw2100_kill_workqueue(priv
);
6415 /* These are safe to call even if they weren't allocated */
6416 ipw2100_queues_free(priv
);
6417 sysfs_remove_group(&pci_dev
->dev
.kobj
,
6418 &ipw2100_attribute_group
);
6420 free_libipw(dev
, 0);
6421 pci_set_drvdata(pci_dev
, NULL
);
6427 pci_release_regions(pci_dev
);
6428 pci_disable_device(pci_dev
);
6433 static void __devexit
ipw2100_pci_remove_one(struct pci_dev
*pci_dev
)
6435 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6436 struct net_device
*dev
;
6439 mutex_lock(&priv
->action_mutex
);
6441 priv
->status
&= ~STATUS_INITIALIZED
;
6443 dev
= priv
->net_dev
;
6444 sysfs_remove_group(&pci_dev
->dev
.kobj
,
6445 &ipw2100_attribute_group
);
6448 if (ipw2100_firmware
.version
)
6449 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
6451 /* Take down the hardware */
6454 /* Release the mutex so that the network subsystem can
6455 * complete any needed calls into the driver... */
6456 mutex_unlock(&priv
->action_mutex
);
6458 /* Unregister the device first - this results in close()
6459 * being called if the device is open. If we free storage
6460 * first, then close() will crash. */
6461 unregister_netdev(dev
);
6463 /* ipw2100_down will ensure that there is no more pending work
6464 * in the workqueue's, so we can safely remove them now. */
6465 ipw2100_kill_workqueue(priv
);
6467 ipw2100_queues_free(priv
);
6469 /* Free potential debugging firmware snapshot */
6470 ipw2100_snapshot_free(priv
);
6473 free_irq(dev
->irq
, priv
);
6476 iounmap((void __iomem
*)dev
->base_addr
);
6478 /* wiphy_unregister needs to be here, before free_libipw */
6479 wiphy_unregister(priv
->ieee
->wdev
.wiphy
);
6480 kfree(priv
->ieee
->bg_band
.channels
);
6481 free_libipw(dev
, 0);
6484 pci_release_regions(pci_dev
);
6485 pci_disable_device(pci_dev
);
6487 IPW_DEBUG_INFO("exit\n");
6491 static int ipw2100_suspend(struct pci_dev
*pci_dev
, pm_message_t state
)
6493 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6494 struct net_device
*dev
= priv
->net_dev
;
6496 IPW_DEBUG_INFO("%s: Going into suspend...\n", dev
->name
);
6498 mutex_lock(&priv
->action_mutex
);
6499 if (priv
->status
& STATUS_INITIALIZED
) {
6500 /* Take down the device; powers it off, etc. */
6504 /* Remove the PRESENT state of the device */
6505 netif_device_detach(dev
);
6507 pci_save_state(pci_dev
);
6508 pci_disable_device(pci_dev
);
6509 pci_set_power_state(pci_dev
, PCI_D3hot
);
6511 priv
->suspend_at
= get_seconds();
6513 mutex_unlock(&priv
->action_mutex
);
6518 static int ipw2100_resume(struct pci_dev
*pci_dev
)
6520 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6521 struct net_device
*dev
= priv
->net_dev
;
6525 if (IPW2100_PM_DISABLED
)
6528 mutex_lock(&priv
->action_mutex
);
6530 IPW_DEBUG_INFO("%s: Coming out of suspend...\n", dev
->name
);
6532 pci_set_power_state(pci_dev
, PCI_D0
);
6533 err
= pci_enable_device(pci_dev
);
6535 printk(KERN_ERR
"%s: pci_enable_device failed on resume\n",
6537 mutex_unlock(&priv
->action_mutex
);
6540 pci_restore_state(pci_dev
);
6543 * Suspend/Resume resets the PCI configuration space, so we have to
6544 * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
6545 * from interfering with C3 CPU state. pci_restore_state won't help
6546 * here since it only restores the first 64 bytes pci config header.
6548 pci_read_config_dword(pci_dev
, 0x40, &val
);
6549 if ((val
& 0x0000ff00) != 0)
6550 pci_write_config_dword(pci_dev
, 0x40, val
& 0xffff00ff);
6552 /* Set the device back into the PRESENT state; this will also wake
6553 * the queue of needed */
6554 netif_device_attach(dev
);
6556 priv
->suspend_time
= get_seconds() - priv
->suspend_at
;
6558 /* Bring the device back up */
6559 if (!(priv
->status
& STATUS_RF_KILL_SW
))
6560 ipw2100_up(priv
, 0);
6562 mutex_unlock(&priv
->action_mutex
);
6568 static void ipw2100_shutdown(struct pci_dev
*pci_dev
)
6570 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6572 /* Take down the device; powers it off, etc. */
6575 pci_disable_device(pci_dev
);
6578 #define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x }
6580 static DEFINE_PCI_DEVICE_TABLE(ipw2100_pci_id_table
) = {
6581 IPW2100_DEV_ID(0x2520), /* IN 2100A mPCI 3A */
6582 IPW2100_DEV_ID(0x2521), /* IN 2100A mPCI 3B */
6583 IPW2100_DEV_ID(0x2524), /* IN 2100A mPCI 3B */
6584 IPW2100_DEV_ID(0x2525), /* IN 2100A mPCI 3B */
6585 IPW2100_DEV_ID(0x2526), /* IN 2100A mPCI Gen A3 */
6586 IPW2100_DEV_ID(0x2522), /* IN 2100 mPCI 3B */
6587 IPW2100_DEV_ID(0x2523), /* IN 2100 mPCI 3A */
6588 IPW2100_DEV_ID(0x2527), /* IN 2100 mPCI 3B */
6589 IPW2100_DEV_ID(0x2528), /* IN 2100 mPCI 3B */
6590 IPW2100_DEV_ID(0x2529), /* IN 2100 mPCI 3B */
6591 IPW2100_DEV_ID(0x252B), /* IN 2100 mPCI 3A */
6592 IPW2100_DEV_ID(0x252C), /* IN 2100 mPCI 3A */
6593 IPW2100_DEV_ID(0x252D), /* IN 2100 mPCI 3A */
6595 IPW2100_DEV_ID(0x2550), /* IB 2100A mPCI 3B */
6596 IPW2100_DEV_ID(0x2551), /* IB 2100 mPCI 3B */
6597 IPW2100_DEV_ID(0x2553), /* IB 2100 mPCI 3B */
6598 IPW2100_DEV_ID(0x2554), /* IB 2100 mPCI 3B */
6599 IPW2100_DEV_ID(0x2555), /* IB 2100 mPCI 3B */
6601 IPW2100_DEV_ID(0x2560), /* DE 2100A mPCI 3A */
6602 IPW2100_DEV_ID(0x2562), /* DE 2100A mPCI 3A */
6603 IPW2100_DEV_ID(0x2563), /* DE 2100A mPCI 3A */
6604 IPW2100_DEV_ID(0x2561), /* DE 2100 mPCI 3A */
6605 IPW2100_DEV_ID(0x2565), /* DE 2100 mPCI 3A */
6606 IPW2100_DEV_ID(0x2566), /* DE 2100 mPCI 3A */
6607 IPW2100_DEV_ID(0x2567), /* DE 2100 mPCI 3A */
6609 IPW2100_DEV_ID(0x2570), /* GA 2100 mPCI 3B */
6611 IPW2100_DEV_ID(0x2580), /* TO 2100A mPCI 3B */
6612 IPW2100_DEV_ID(0x2582), /* TO 2100A mPCI 3B */
6613 IPW2100_DEV_ID(0x2583), /* TO 2100A mPCI 3B */
6614 IPW2100_DEV_ID(0x2581), /* TO 2100 mPCI 3B */
6615 IPW2100_DEV_ID(0x2585), /* TO 2100 mPCI 3B */
6616 IPW2100_DEV_ID(0x2586), /* TO 2100 mPCI 3B */
6617 IPW2100_DEV_ID(0x2587), /* TO 2100 mPCI 3B */
6619 IPW2100_DEV_ID(0x2590), /* SO 2100A mPCI 3B */
6620 IPW2100_DEV_ID(0x2592), /* SO 2100A mPCI 3B */
6621 IPW2100_DEV_ID(0x2591), /* SO 2100 mPCI 3B */
6622 IPW2100_DEV_ID(0x2593), /* SO 2100 mPCI 3B */
6623 IPW2100_DEV_ID(0x2596), /* SO 2100 mPCI 3B */
6624 IPW2100_DEV_ID(0x2598), /* SO 2100 mPCI 3B */
6626 IPW2100_DEV_ID(0x25A0), /* HP 2100 mPCI 3B */
6630 MODULE_DEVICE_TABLE(pci
, ipw2100_pci_id_table
);
6632 static struct pci_driver ipw2100_pci_driver
= {
6634 .id_table
= ipw2100_pci_id_table
,
6635 .probe
= ipw2100_pci_init_one
,
6636 .remove
= __devexit_p(ipw2100_pci_remove_one
),
6638 .suspend
= ipw2100_suspend
,
6639 .resume
= ipw2100_resume
,
6641 .shutdown
= ipw2100_shutdown
,
6645 * Initialize the ipw2100 driver/module
6647 * @returns 0 if ok, < 0 errno node con error.
6649 * Note: we cannot init the /proc stuff until the PCI driver is there,
6650 * or we risk an unlikely race condition on someone accessing
6651 * uninitialized data in the PCI dev struct through /proc.
6653 static int __init
ipw2100_init(void)
6657 printk(KERN_INFO DRV_NAME
": %s, %s\n", DRV_DESCRIPTION
, DRV_VERSION
);
6658 printk(KERN_INFO DRV_NAME
": %s\n", DRV_COPYRIGHT
);
6660 pm_qos_add_request(&ipw2100_pm_qos_req
, PM_QOS_CPU_DMA_LATENCY
,
6661 PM_QOS_DEFAULT_VALUE
);
6663 ret
= pci_register_driver(&ipw2100_pci_driver
);
6667 #ifdef CONFIG_IPW2100_DEBUG
6668 ipw2100_debug_level
= debug
;
6669 ret
= driver_create_file(&ipw2100_pci_driver
.driver
,
6670 &driver_attr_debug_level
);
6678 * Cleanup ipw2100 driver registration
6680 static void __exit
ipw2100_exit(void)
6682 /* FIXME: IPG: check that we have no instances of the devices open */
6683 #ifdef CONFIG_IPW2100_DEBUG
6684 driver_remove_file(&ipw2100_pci_driver
.driver
,
6685 &driver_attr_debug_level
);
6687 pci_unregister_driver(&ipw2100_pci_driver
);
6688 pm_qos_remove_request(&ipw2100_pm_qos_req
);
6691 module_init(ipw2100_init
);
6692 module_exit(ipw2100_exit
);
6694 static int ipw2100_wx_get_name(struct net_device
*dev
,
6695 struct iw_request_info
*info
,
6696 union iwreq_data
*wrqu
, char *extra
)
6699 * This can be called at any time. No action lock required
6702 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6703 if (!(priv
->status
& STATUS_ASSOCIATED
))
6704 strcpy(wrqu
->name
, "unassociated");
6706 snprintf(wrqu
->name
, IFNAMSIZ
, "IEEE 802.11b");
6708 IPW_DEBUG_WX("Name: %s\n", wrqu
->name
);
6712 static int ipw2100_wx_set_freq(struct net_device
*dev
,
6713 struct iw_request_info
*info
,
6714 union iwreq_data
*wrqu
, char *extra
)
6716 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6717 struct iw_freq
*fwrq
= &wrqu
->freq
;
6720 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
)
6723 mutex_lock(&priv
->action_mutex
);
6724 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6729 /* if setting by freq convert to channel */
6731 if ((fwrq
->m
>= (int)2.412e8
&& fwrq
->m
<= (int)2.487e8
)) {
6732 int f
= fwrq
->m
/ 100000;
6735 while ((c
< REG_MAX_CHANNEL
) &&
6736 (f
!= ipw2100_frequencies
[c
]))
6739 /* hack to fall through */
6745 if (fwrq
->e
> 0 || fwrq
->m
> 1000) {
6748 } else { /* Set the channel */
6749 IPW_DEBUG_WX("SET Freq/Channel -> %d\n", fwrq
->m
);
6750 err
= ipw2100_set_channel(priv
, fwrq
->m
, 0);
6754 mutex_unlock(&priv
->action_mutex
);
6758 static int ipw2100_wx_get_freq(struct net_device
*dev
,
6759 struct iw_request_info
*info
,
6760 union iwreq_data
*wrqu
, char *extra
)
6763 * This can be called at any time. No action lock required
6766 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6770 /* If we are associated, trying to associate, or have a statically
6771 * configured CHANNEL then return that; otherwise return ANY */
6772 if (priv
->config
& CFG_STATIC_CHANNEL
||
6773 priv
->status
& STATUS_ASSOCIATED
)
6774 wrqu
->freq
.m
= priv
->channel
;
6778 IPW_DEBUG_WX("GET Freq/Channel -> %d\n", priv
->channel
);
6783 static int ipw2100_wx_set_mode(struct net_device
*dev
,
6784 struct iw_request_info
*info
,
6785 union iwreq_data
*wrqu
, char *extra
)
6787 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6790 IPW_DEBUG_WX("SET Mode -> %d\n", wrqu
->mode
);
6792 if (wrqu
->mode
== priv
->ieee
->iw_mode
)
6795 mutex_lock(&priv
->action_mutex
);
6796 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6801 switch (wrqu
->mode
) {
6802 #ifdef CONFIG_IPW2100_MONITOR
6803 case IW_MODE_MONITOR
:
6804 err
= ipw2100_switch_mode(priv
, IW_MODE_MONITOR
);
6806 #endif /* CONFIG_IPW2100_MONITOR */
6808 err
= ipw2100_switch_mode(priv
, IW_MODE_ADHOC
);
6813 err
= ipw2100_switch_mode(priv
, IW_MODE_INFRA
);
6818 mutex_unlock(&priv
->action_mutex
);
6822 static int ipw2100_wx_get_mode(struct net_device
*dev
,
6823 struct iw_request_info
*info
,
6824 union iwreq_data
*wrqu
, char *extra
)
6827 * This can be called at any time. No action lock required
6830 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6832 wrqu
->mode
= priv
->ieee
->iw_mode
;
6833 IPW_DEBUG_WX("GET Mode -> %d\n", wrqu
->mode
);
6838 #define POWER_MODES 5
6840 /* Values are in microsecond */
6841 static const s32 timeout_duration
[POWER_MODES
] = {
6849 static const s32 period_duration
[POWER_MODES
] = {
6857 static int ipw2100_wx_get_range(struct net_device
*dev
,
6858 struct iw_request_info
*info
,
6859 union iwreq_data
*wrqu
, char *extra
)
6862 * This can be called at any time. No action lock required
6865 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6866 struct iw_range
*range
= (struct iw_range
*)extra
;
6870 wrqu
->data
.length
= sizeof(*range
);
6871 memset(range
, 0, sizeof(*range
));
6873 /* Let's try to keep this struct in the same order as in
6874 * linux/include/wireless.h
6877 /* TODO: See what values we can set, and remove the ones we can't
6878 * set, or fill them with some default data.
6881 /* ~5 Mb/s real (802.11b) */
6882 range
->throughput
= 5 * 1000 * 1000;
6884 // range->sensitivity; /* signal level threshold range */
6886 range
->max_qual
.qual
= 100;
6887 /* TODO: Find real max RSSI and stick here */
6888 range
->max_qual
.level
= 0;
6889 range
->max_qual
.noise
= 0;
6890 range
->max_qual
.updated
= 7; /* Updated all three */
6892 range
->avg_qual
.qual
= 70; /* > 8% missed beacons is 'bad' */
6893 /* TODO: Find real 'good' to 'bad' threshold value for RSSI */
6894 range
->avg_qual
.level
= 20 + IPW2100_RSSI_TO_DBM
;
6895 range
->avg_qual
.noise
= 0;
6896 range
->avg_qual
.updated
= 7; /* Updated all three */
6898 range
->num_bitrates
= RATE_COUNT
;
6900 for (i
= 0; i
< RATE_COUNT
&& i
< IW_MAX_BITRATES
; i
++) {
6901 range
->bitrate
[i
] = ipw2100_rates_11b
[i
];
6904 range
->min_rts
= MIN_RTS_THRESHOLD
;
6905 range
->max_rts
= MAX_RTS_THRESHOLD
;
6906 range
->min_frag
= MIN_FRAG_THRESHOLD
;
6907 range
->max_frag
= MAX_FRAG_THRESHOLD
;
6909 range
->min_pmp
= period_duration
[0]; /* Minimal PM period */
6910 range
->max_pmp
= period_duration
[POWER_MODES
- 1]; /* Maximal PM period */
6911 range
->min_pmt
= timeout_duration
[POWER_MODES
- 1]; /* Minimal PM timeout */
6912 range
->max_pmt
= timeout_duration
[0]; /* Maximal PM timeout */
6914 /* How to decode max/min PM period */
6915 range
->pmp_flags
= IW_POWER_PERIOD
;
6916 /* How to decode max/min PM period */
6917 range
->pmt_flags
= IW_POWER_TIMEOUT
;
6918 /* What PM options are supported */
6919 range
->pm_capa
= IW_POWER_TIMEOUT
| IW_POWER_PERIOD
;
6921 range
->encoding_size
[0] = 5;
6922 range
->encoding_size
[1] = 13; /* Different token sizes */
6923 range
->num_encoding_sizes
= 2; /* Number of entry in the list */
6924 range
->max_encoding_tokens
= WEP_KEYS
; /* Max number of tokens */
6925 // range->encoding_login_index; /* token index for login token */
6927 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
6928 range
->txpower_capa
= IW_TXPOW_DBM
;
6929 range
->num_txpower
= IW_MAX_TXPOWER
;
6930 for (i
= 0, level
= (IPW_TX_POWER_MAX_DBM
* 16);
6933 ((IPW_TX_POWER_MAX_DBM
-
6934 IPW_TX_POWER_MIN_DBM
) * 16) / (IW_MAX_TXPOWER
- 1))
6935 range
->txpower
[i
] = level
/ 16;
6937 range
->txpower_capa
= 0;
6938 range
->num_txpower
= 0;
6941 /* Set the Wireless Extension versions */
6942 range
->we_version_compiled
= WIRELESS_EXT
;
6943 range
->we_version_source
= 18;
6945 // range->retry_capa; /* What retry options are supported */
6946 // range->retry_flags; /* How to decode max/min retry limit */
6947 // range->r_time_flags; /* How to decode max/min retry life */
6948 // range->min_retry; /* Minimal number of retries */
6949 // range->max_retry; /* Maximal number of retries */
6950 // range->min_r_time; /* Minimal retry lifetime */
6951 // range->max_r_time; /* Maximal retry lifetime */
6953 range
->num_channels
= FREQ_COUNT
;
6956 for (i
= 0; i
< FREQ_COUNT
; i
++) {
6957 // TODO: Include only legal frequencies for some countries
6958 // if (local->channel_mask & (1 << i)) {
6959 range
->freq
[val
].i
= i
+ 1;
6960 range
->freq
[val
].m
= ipw2100_frequencies
[i
] * 100000;
6961 range
->freq
[val
].e
= 1;
6964 if (val
== IW_MAX_FREQUENCIES
)
6967 range
->num_frequency
= val
;
6969 /* Event capability (kernel + driver) */
6970 range
->event_capa
[0] = (IW_EVENT_CAPA_K_0
|
6971 IW_EVENT_CAPA_MASK(SIOCGIWAP
));
6972 range
->event_capa
[1] = IW_EVENT_CAPA_K_1
;
6974 range
->enc_capa
= IW_ENC_CAPA_WPA
| IW_ENC_CAPA_WPA2
|
6975 IW_ENC_CAPA_CIPHER_TKIP
| IW_ENC_CAPA_CIPHER_CCMP
;
6977 IPW_DEBUG_WX("GET Range\n");
6982 static int ipw2100_wx_set_wap(struct net_device
*dev
,
6983 struct iw_request_info
*info
,
6984 union iwreq_data
*wrqu
, char *extra
)
6986 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6989 static const unsigned char any
[] = {
6990 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
6992 static const unsigned char off
[] = {
6993 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
6997 if (wrqu
->ap_addr
.sa_family
!= ARPHRD_ETHER
)
7000 mutex_lock(&priv
->action_mutex
);
7001 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7006 if (!memcmp(any
, wrqu
->ap_addr
.sa_data
, ETH_ALEN
) ||
7007 !memcmp(off
, wrqu
->ap_addr
.sa_data
, ETH_ALEN
)) {
7008 /* we disable mandatory BSSID association */
7009 IPW_DEBUG_WX("exit - disable mandatory BSSID\n");
7010 priv
->config
&= ~CFG_STATIC_BSSID
;
7011 err
= ipw2100_set_mandatory_bssid(priv
, NULL
, 0);
7015 priv
->config
|= CFG_STATIC_BSSID
;
7016 memcpy(priv
->mandatory_bssid_mac
, wrqu
->ap_addr
.sa_data
, ETH_ALEN
);
7018 err
= ipw2100_set_mandatory_bssid(priv
, wrqu
->ap_addr
.sa_data
, 0);
7020 IPW_DEBUG_WX("SET BSSID -> %pM\n", wrqu
->ap_addr
.sa_data
);
7023 mutex_unlock(&priv
->action_mutex
);
7027 static int ipw2100_wx_get_wap(struct net_device
*dev
,
7028 struct iw_request_info
*info
,
7029 union iwreq_data
*wrqu
, char *extra
)
7032 * This can be called at any time. No action lock required
7035 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7037 /* If we are associated, trying to associate, or have a statically
7038 * configured BSSID then return that; otherwise return ANY */
7039 if (priv
->config
& CFG_STATIC_BSSID
|| priv
->status
& STATUS_ASSOCIATED
) {
7040 wrqu
->ap_addr
.sa_family
= ARPHRD_ETHER
;
7041 memcpy(wrqu
->ap_addr
.sa_data
, priv
->bssid
, ETH_ALEN
);
7043 memset(wrqu
->ap_addr
.sa_data
, 0, ETH_ALEN
);
7045 IPW_DEBUG_WX("Getting WAP BSSID: %pM\n", wrqu
->ap_addr
.sa_data
);
7049 static int ipw2100_wx_set_essid(struct net_device
*dev
,
7050 struct iw_request_info
*info
,
7051 union iwreq_data
*wrqu
, char *extra
)
7053 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7054 char *essid
= ""; /* ANY */
7057 DECLARE_SSID_BUF(ssid
);
7059 mutex_lock(&priv
->action_mutex
);
7060 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7065 if (wrqu
->essid
.flags
&& wrqu
->essid
.length
) {
7066 length
= wrqu
->essid
.length
;
7071 IPW_DEBUG_WX("Setting ESSID to ANY\n");
7072 priv
->config
&= ~CFG_STATIC_ESSID
;
7073 err
= ipw2100_set_essid(priv
, NULL
, 0, 0);
7077 length
= min(length
, IW_ESSID_MAX_SIZE
);
7079 priv
->config
|= CFG_STATIC_ESSID
;
7081 if (priv
->essid_len
== length
&& !memcmp(priv
->essid
, extra
, length
)) {
7082 IPW_DEBUG_WX("ESSID set to current ESSID.\n");
7087 IPW_DEBUG_WX("Setting ESSID: '%s' (%d)\n",
7088 print_ssid(ssid
, essid
, length
), length
);
7090 priv
->essid_len
= length
;
7091 memcpy(priv
->essid
, essid
, priv
->essid_len
);
7093 err
= ipw2100_set_essid(priv
, essid
, length
, 0);
7096 mutex_unlock(&priv
->action_mutex
);
7100 static int ipw2100_wx_get_essid(struct net_device
*dev
,
7101 struct iw_request_info
*info
,
7102 union iwreq_data
*wrqu
, char *extra
)
7105 * This can be called at any time. No action lock required
7108 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7109 DECLARE_SSID_BUF(ssid
);
7111 /* If we are associated, trying to associate, or have a statically
7112 * configured ESSID then return that; otherwise return ANY */
7113 if (priv
->config
& CFG_STATIC_ESSID
|| priv
->status
& STATUS_ASSOCIATED
) {
7114 IPW_DEBUG_WX("Getting essid: '%s'\n",
7115 print_ssid(ssid
, priv
->essid
, priv
->essid_len
));
7116 memcpy(extra
, priv
->essid
, priv
->essid_len
);
7117 wrqu
->essid
.length
= priv
->essid_len
;
7118 wrqu
->essid
.flags
= 1; /* active */
7120 IPW_DEBUG_WX("Getting essid: ANY\n");
7121 wrqu
->essid
.length
= 0;
7122 wrqu
->essid
.flags
= 0; /* active */
7128 static int ipw2100_wx_set_nick(struct net_device
*dev
,
7129 struct iw_request_info
*info
,
7130 union iwreq_data
*wrqu
, char *extra
)
7133 * This can be called at any time. No action lock required
7136 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7138 if (wrqu
->data
.length
> IW_ESSID_MAX_SIZE
)
7141 wrqu
->data
.length
= min((size_t) wrqu
->data
.length
, sizeof(priv
->nick
));
7142 memset(priv
->nick
, 0, sizeof(priv
->nick
));
7143 memcpy(priv
->nick
, extra
, wrqu
->data
.length
);
7145 IPW_DEBUG_WX("SET Nickname -> %s\n", priv
->nick
);
7150 static int ipw2100_wx_get_nick(struct net_device
*dev
,
7151 struct iw_request_info
*info
,
7152 union iwreq_data
*wrqu
, char *extra
)
7155 * This can be called at any time. No action lock required
7158 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7160 wrqu
->data
.length
= strlen(priv
->nick
);
7161 memcpy(extra
, priv
->nick
, wrqu
->data
.length
);
7162 wrqu
->data
.flags
= 1; /* active */
7164 IPW_DEBUG_WX("GET Nickname -> %s\n", extra
);
7169 static int ipw2100_wx_set_rate(struct net_device
*dev
,
7170 struct iw_request_info
*info
,
7171 union iwreq_data
*wrqu
, char *extra
)
7173 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7174 u32 target_rate
= wrqu
->bitrate
.value
;
7178 mutex_lock(&priv
->action_mutex
);
7179 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7186 if (target_rate
== 1000000 ||
7187 (!wrqu
->bitrate
.fixed
&& target_rate
> 1000000))
7188 rate
|= TX_RATE_1_MBIT
;
7189 if (target_rate
== 2000000 ||
7190 (!wrqu
->bitrate
.fixed
&& target_rate
> 2000000))
7191 rate
|= TX_RATE_2_MBIT
;
7192 if (target_rate
== 5500000 ||
7193 (!wrqu
->bitrate
.fixed
&& target_rate
> 5500000))
7194 rate
|= TX_RATE_5_5_MBIT
;
7195 if (target_rate
== 11000000 ||
7196 (!wrqu
->bitrate
.fixed
&& target_rate
> 11000000))
7197 rate
|= TX_RATE_11_MBIT
;
7199 rate
= DEFAULT_TX_RATES
;
7201 err
= ipw2100_set_tx_rates(priv
, rate
, 0);
7203 IPW_DEBUG_WX("SET Rate -> %04X\n", rate
);
7205 mutex_unlock(&priv
->action_mutex
);
7209 static int ipw2100_wx_get_rate(struct net_device
*dev
,
7210 struct iw_request_info
*info
,
7211 union iwreq_data
*wrqu
, char *extra
)
7213 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7215 unsigned int len
= sizeof(val
);
7218 if (!(priv
->status
& STATUS_ENABLED
) ||
7219 priv
->status
& STATUS_RF_KILL_MASK
||
7220 !(priv
->status
& STATUS_ASSOCIATED
)) {
7221 wrqu
->bitrate
.value
= 0;
7225 mutex_lock(&priv
->action_mutex
);
7226 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7231 err
= ipw2100_get_ordinal(priv
, IPW_ORD_CURRENT_TX_RATE
, &val
, &len
);
7233 IPW_DEBUG_WX("failed querying ordinals.\n");
7237 switch (val
& TX_RATE_MASK
) {
7238 case TX_RATE_1_MBIT
:
7239 wrqu
->bitrate
.value
= 1000000;
7241 case TX_RATE_2_MBIT
:
7242 wrqu
->bitrate
.value
= 2000000;
7244 case TX_RATE_5_5_MBIT
:
7245 wrqu
->bitrate
.value
= 5500000;
7247 case TX_RATE_11_MBIT
:
7248 wrqu
->bitrate
.value
= 11000000;
7251 wrqu
->bitrate
.value
= 0;
7254 IPW_DEBUG_WX("GET Rate -> %d\n", wrqu
->bitrate
.value
);
7257 mutex_unlock(&priv
->action_mutex
);
7261 static int ipw2100_wx_set_rts(struct net_device
*dev
,
7262 struct iw_request_info
*info
,
7263 union iwreq_data
*wrqu
, char *extra
)
7265 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7268 /* Auto RTS not yet supported */
7269 if (wrqu
->rts
.fixed
== 0)
7272 mutex_lock(&priv
->action_mutex
);
7273 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7278 if (wrqu
->rts
.disabled
)
7279 value
= priv
->rts_threshold
| RTS_DISABLED
;
7281 if (wrqu
->rts
.value
< 1 || wrqu
->rts
.value
> 2304) {
7285 value
= wrqu
->rts
.value
;
7288 err
= ipw2100_set_rts_threshold(priv
, value
);
7290 IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X\n", value
);
7292 mutex_unlock(&priv
->action_mutex
);
7296 static int ipw2100_wx_get_rts(struct net_device
*dev
,
7297 struct iw_request_info
*info
,
7298 union iwreq_data
*wrqu
, char *extra
)
7301 * This can be called at any time. No action lock required
7304 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7306 wrqu
->rts
.value
= priv
->rts_threshold
& ~RTS_DISABLED
;
7307 wrqu
->rts
.fixed
= 1; /* no auto select */
7309 /* If RTS is set to the default value, then it is disabled */
7310 wrqu
->rts
.disabled
= (priv
->rts_threshold
& RTS_DISABLED
) ? 1 : 0;
7312 IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X\n", wrqu
->rts
.value
);
7317 static int ipw2100_wx_set_txpow(struct net_device
*dev
,
7318 struct iw_request_info
*info
,
7319 union iwreq_data
*wrqu
, char *extra
)
7321 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7324 if (ipw_radio_kill_sw(priv
, wrqu
->txpower
.disabled
))
7325 return -EINPROGRESS
;
7327 if (priv
->ieee
->iw_mode
!= IW_MODE_ADHOC
)
7330 if ((wrqu
->txpower
.flags
& IW_TXPOW_TYPE
) != IW_TXPOW_DBM
)
7333 if (wrqu
->txpower
.fixed
== 0)
7334 value
= IPW_TX_POWER_DEFAULT
;
7336 if (wrqu
->txpower
.value
< IPW_TX_POWER_MIN_DBM
||
7337 wrqu
->txpower
.value
> IPW_TX_POWER_MAX_DBM
)
7340 value
= wrqu
->txpower
.value
;
7343 mutex_lock(&priv
->action_mutex
);
7344 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7349 err
= ipw2100_set_tx_power(priv
, value
);
7351 IPW_DEBUG_WX("SET TX Power -> %d\n", value
);
7354 mutex_unlock(&priv
->action_mutex
);
7358 static int ipw2100_wx_get_txpow(struct net_device
*dev
,
7359 struct iw_request_info
*info
,
7360 union iwreq_data
*wrqu
, char *extra
)
7363 * This can be called at any time. No action lock required
7366 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7368 wrqu
->txpower
.disabled
= (priv
->status
& STATUS_RF_KILL_MASK
) ? 1 : 0;
7370 if (priv
->tx_power
== IPW_TX_POWER_DEFAULT
) {
7371 wrqu
->txpower
.fixed
= 0;
7372 wrqu
->txpower
.value
= IPW_TX_POWER_MAX_DBM
;
7374 wrqu
->txpower
.fixed
= 1;
7375 wrqu
->txpower
.value
= priv
->tx_power
;
7378 wrqu
->txpower
.flags
= IW_TXPOW_DBM
;
7380 IPW_DEBUG_WX("GET TX Power -> %d\n", wrqu
->txpower
.value
);
7385 static int ipw2100_wx_set_frag(struct net_device
*dev
,
7386 struct iw_request_info
*info
,
7387 union iwreq_data
*wrqu
, char *extra
)
7390 * This can be called at any time. No action lock required
7393 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7395 if (!wrqu
->frag
.fixed
)
7398 if (wrqu
->frag
.disabled
) {
7399 priv
->frag_threshold
|= FRAG_DISABLED
;
7400 priv
->ieee
->fts
= DEFAULT_FTS
;
7402 if (wrqu
->frag
.value
< MIN_FRAG_THRESHOLD
||
7403 wrqu
->frag
.value
> MAX_FRAG_THRESHOLD
)
7406 priv
->ieee
->fts
= wrqu
->frag
.value
& ~0x1;
7407 priv
->frag_threshold
= priv
->ieee
->fts
;
7410 IPW_DEBUG_WX("SET Frag Threshold -> %d\n", priv
->ieee
->fts
);
7415 static int ipw2100_wx_get_frag(struct net_device
*dev
,
7416 struct iw_request_info
*info
,
7417 union iwreq_data
*wrqu
, char *extra
)
7420 * This can be called at any time. No action lock required
7423 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7424 wrqu
->frag
.value
= priv
->frag_threshold
& ~FRAG_DISABLED
;
7425 wrqu
->frag
.fixed
= 0; /* no auto select */
7426 wrqu
->frag
.disabled
= (priv
->frag_threshold
& FRAG_DISABLED
) ? 1 : 0;
7428 IPW_DEBUG_WX("GET Frag Threshold -> %d\n", wrqu
->frag
.value
);
7433 static int ipw2100_wx_set_retry(struct net_device
*dev
,
7434 struct iw_request_info
*info
,
7435 union iwreq_data
*wrqu
, char *extra
)
7437 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7440 if (wrqu
->retry
.flags
& IW_RETRY_LIFETIME
|| wrqu
->retry
.disabled
)
7443 if (!(wrqu
->retry
.flags
& IW_RETRY_LIMIT
))
7446 mutex_lock(&priv
->action_mutex
);
7447 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7452 if (wrqu
->retry
.flags
& IW_RETRY_SHORT
) {
7453 err
= ipw2100_set_short_retry(priv
, wrqu
->retry
.value
);
7454 IPW_DEBUG_WX("SET Short Retry Limit -> %d\n",
7459 if (wrqu
->retry
.flags
& IW_RETRY_LONG
) {
7460 err
= ipw2100_set_long_retry(priv
, wrqu
->retry
.value
);
7461 IPW_DEBUG_WX("SET Long Retry Limit -> %d\n",
7466 err
= ipw2100_set_short_retry(priv
, wrqu
->retry
.value
);
7468 err
= ipw2100_set_long_retry(priv
, wrqu
->retry
.value
);
7470 IPW_DEBUG_WX("SET Both Retry Limits -> %d\n", wrqu
->retry
.value
);
7473 mutex_unlock(&priv
->action_mutex
);
7477 static int ipw2100_wx_get_retry(struct net_device
*dev
,
7478 struct iw_request_info
*info
,
7479 union iwreq_data
*wrqu
, char *extra
)
7482 * This can be called at any time. No action lock required
7485 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7487 wrqu
->retry
.disabled
= 0; /* can't be disabled */
7489 if ((wrqu
->retry
.flags
& IW_RETRY_TYPE
) == IW_RETRY_LIFETIME
)
7492 if (wrqu
->retry
.flags
& IW_RETRY_LONG
) {
7493 wrqu
->retry
.flags
= IW_RETRY_LIMIT
| IW_RETRY_LONG
;
7494 wrqu
->retry
.value
= priv
->long_retry_limit
;
7497 (priv
->short_retry_limit
!=
7498 priv
->long_retry_limit
) ?
7499 IW_RETRY_LIMIT
| IW_RETRY_SHORT
: IW_RETRY_LIMIT
;
7501 wrqu
->retry
.value
= priv
->short_retry_limit
;
7504 IPW_DEBUG_WX("GET Retry -> %d\n", wrqu
->retry
.value
);
7509 static int ipw2100_wx_set_scan(struct net_device
*dev
,
7510 struct iw_request_info
*info
,
7511 union iwreq_data
*wrqu
, char *extra
)
7513 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7516 mutex_lock(&priv
->action_mutex
);
7517 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7522 IPW_DEBUG_WX("Initiating scan...\n");
7524 priv
->user_requested_scan
= 1;
7525 if (ipw2100_set_scan_options(priv
) || ipw2100_start_scan(priv
)) {
7526 IPW_DEBUG_WX("Start scan failed.\n");
7528 /* TODO: Mark a scan as pending so when hardware initialized
7533 mutex_unlock(&priv
->action_mutex
);
7537 static int ipw2100_wx_get_scan(struct net_device
*dev
,
7538 struct iw_request_info
*info
,
7539 union iwreq_data
*wrqu
, char *extra
)
7542 * This can be called at any time. No action lock required
7545 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7546 return libipw_wx_get_scan(priv
->ieee
, info
, wrqu
, extra
);
7550 * Implementation based on code in hostap-driver v0.1.3 hostap_ioctl.c
7552 static int ipw2100_wx_set_encode(struct net_device
*dev
,
7553 struct iw_request_info
*info
,
7554 union iwreq_data
*wrqu
, char *key
)
7557 * No check of STATUS_INITIALIZED required
7560 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7561 return libipw_wx_set_encode(priv
->ieee
, info
, wrqu
, key
);
7564 static int ipw2100_wx_get_encode(struct net_device
*dev
,
7565 struct iw_request_info
*info
,
7566 union iwreq_data
*wrqu
, char *key
)
7569 * This can be called at any time. No action lock required
7572 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7573 return libipw_wx_get_encode(priv
->ieee
, info
, wrqu
, key
);
7576 static int ipw2100_wx_set_power(struct net_device
*dev
,
7577 struct iw_request_info
*info
,
7578 union iwreq_data
*wrqu
, char *extra
)
7580 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7583 mutex_lock(&priv
->action_mutex
);
7584 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7589 if (wrqu
->power
.disabled
) {
7590 priv
->power_mode
= IPW_POWER_LEVEL(priv
->power_mode
);
7591 err
= ipw2100_set_power_mode(priv
, IPW_POWER_MODE_CAM
);
7592 IPW_DEBUG_WX("SET Power Management Mode -> off\n");
7596 switch (wrqu
->power
.flags
& IW_POWER_MODE
) {
7597 case IW_POWER_ON
: /* If not specified */
7598 case IW_POWER_MODE
: /* If set all mask */
7599 case IW_POWER_ALL_R
: /* If explicitly state all */
7601 default: /* Otherwise we don't support it */
7602 IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
7608 /* If the user hasn't specified a power management mode yet, default
7610 priv
->power_mode
= IPW_POWER_ENABLED
| priv
->power_mode
;
7611 err
= ipw2100_set_power_mode(priv
, IPW_POWER_LEVEL(priv
->power_mode
));
7613 IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n", priv
->power_mode
);
7616 mutex_unlock(&priv
->action_mutex
);
7621 static int ipw2100_wx_get_power(struct net_device
*dev
,
7622 struct iw_request_info
*info
,
7623 union iwreq_data
*wrqu
, char *extra
)
7626 * This can be called at any time. No action lock required
7629 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7631 if (!(priv
->power_mode
& IPW_POWER_ENABLED
))
7632 wrqu
->power
.disabled
= 1;
7634 wrqu
->power
.disabled
= 0;
7635 wrqu
->power
.flags
= 0;
7638 IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv
->power_mode
);
7648 static int ipw2100_wx_set_genie(struct net_device
*dev
,
7649 struct iw_request_info
*info
,
7650 union iwreq_data
*wrqu
, char *extra
)
7653 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7654 struct libipw_device
*ieee
= priv
->ieee
;
7657 if (!ieee
->wpa_enabled
)
7660 if (wrqu
->data
.length
> MAX_WPA_IE_LEN
||
7661 (wrqu
->data
.length
&& extra
== NULL
))
7664 if (wrqu
->data
.length
) {
7665 buf
= kmemdup(extra
, wrqu
->data
.length
, GFP_KERNEL
);
7669 kfree(ieee
->wpa_ie
);
7671 ieee
->wpa_ie_len
= wrqu
->data
.length
;
7673 kfree(ieee
->wpa_ie
);
7674 ieee
->wpa_ie
= NULL
;
7675 ieee
->wpa_ie_len
= 0;
7678 ipw2100_wpa_assoc_frame(priv
, ieee
->wpa_ie
, ieee
->wpa_ie_len
);
7684 static int ipw2100_wx_get_genie(struct net_device
*dev
,
7685 struct iw_request_info
*info
,
7686 union iwreq_data
*wrqu
, char *extra
)
7688 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7689 struct libipw_device
*ieee
= priv
->ieee
;
7691 if (ieee
->wpa_ie_len
== 0 || ieee
->wpa_ie
== NULL
) {
7692 wrqu
->data
.length
= 0;
7696 if (wrqu
->data
.length
< ieee
->wpa_ie_len
)
7699 wrqu
->data
.length
= ieee
->wpa_ie_len
;
7700 memcpy(extra
, ieee
->wpa_ie
, ieee
->wpa_ie_len
);
7706 static int ipw2100_wx_set_auth(struct net_device
*dev
,
7707 struct iw_request_info
*info
,
7708 union iwreq_data
*wrqu
, char *extra
)
7710 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7711 struct libipw_device
*ieee
= priv
->ieee
;
7712 struct iw_param
*param
= &wrqu
->param
;
7713 struct lib80211_crypt_data
*crypt
;
7714 unsigned long flags
;
7717 switch (param
->flags
& IW_AUTH_INDEX
) {
7718 case IW_AUTH_WPA_VERSION
:
7719 case IW_AUTH_CIPHER_PAIRWISE
:
7720 case IW_AUTH_CIPHER_GROUP
:
7721 case IW_AUTH_KEY_MGMT
:
7723 * ipw2200 does not use these parameters
7727 case IW_AUTH_TKIP_COUNTERMEASURES
:
7728 crypt
= priv
->ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
];
7729 if (!crypt
|| !crypt
->ops
->set_flags
|| !crypt
->ops
->get_flags
)
7732 flags
= crypt
->ops
->get_flags(crypt
->priv
);
7735 flags
|= IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
;
7737 flags
&= ~IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
;
7739 crypt
->ops
->set_flags(flags
, crypt
->priv
);
7743 case IW_AUTH_DROP_UNENCRYPTED
:{
7746 * wpa_supplicant calls set_wpa_enabled when the driver
7747 * is loaded and unloaded, regardless of if WPA is being
7748 * used. No other calls are made which can be used to
7749 * determine if encryption will be used or not prior to
7750 * association being expected. If encryption is not being
7751 * used, drop_unencrypted is set to false, else true -- we
7752 * can use this to determine if the CAP_PRIVACY_ON bit should
7755 struct libipw_security sec
= {
7756 .flags
= SEC_ENABLED
,
7757 .enabled
= param
->value
,
7759 priv
->ieee
->drop_unencrypted
= param
->value
;
7760 /* We only change SEC_LEVEL for open mode. Others
7761 * are set by ipw_wpa_set_encryption.
7763 if (!param
->value
) {
7764 sec
.flags
|= SEC_LEVEL
;
7765 sec
.level
= SEC_LEVEL_0
;
7767 sec
.flags
|= SEC_LEVEL
;
7768 sec
.level
= SEC_LEVEL_1
;
7770 if (priv
->ieee
->set_security
)
7771 priv
->ieee
->set_security(priv
->ieee
->dev
, &sec
);
7775 case IW_AUTH_80211_AUTH_ALG
:
7776 ret
= ipw2100_wpa_set_auth_algs(priv
, param
->value
);
7779 case IW_AUTH_WPA_ENABLED
:
7780 ret
= ipw2100_wpa_enable(priv
, param
->value
);
7783 case IW_AUTH_RX_UNENCRYPTED_EAPOL
:
7784 ieee
->ieee802_1x
= param
->value
;
7787 //case IW_AUTH_ROAMING_CONTROL:
7788 case IW_AUTH_PRIVACY_INVOKED
:
7789 ieee
->privacy_invoked
= param
->value
;
7799 static int ipw2100_wx_get_auth(struct net_device
*dev
,
7800 struct iw_request_info
*info
,
7801 union iwreq_data
*wrqu
, char *extra
)
7803 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7804 struct libipw_device
*ieee
= priv
->ieee
;
7805 struct lib80211_crypt_data
*crypt
;
7806 struct iw_param
*param
= &wrqu
->param
;
7809 switch (param
->flags
& IW_AUTH_INDEX
) {
7810 case IW_AUTH_WPA_VERSION
:
7811 case IW_AUTH_CIPHER_PAIRWISE
:
7812 case IW_AUTH_CIPHER_GROUP
:
7813 case IW_AUTH_KEY_MGMT
:
7815 * wpa_supplicant will control these internally
7820 case IW_AUTH_TKIP_COUNTERMEASURES
:
7821 crypt
= priv
->ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
];
7822 if (!crypt
|| !crypt
->ops
->get_flags
) {
7823 IPW_DEBUG_WARNING("Can't get TKIP countermeasures: "
7824 "crypt not set!\n");
7828 param
->value
= (crypt
->ops
->get_flags(crypt
->priv
) &
7829 IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
) ? 1 : 0;
7833 case IW_AUTH_DROP_UNENCRYPTED
:
7834 param
->value
= ieee
->drop_unencrypted
;
7837 case IW_AUTH_80211_AUTH_ALG
:
7838 param
->value
= priv
->ieee
->sec
.auth_mode
;
7841 case IW_AUTH_WPA_ENABLED
:
7842 param
->value
= ieee
->wpa_enabled
;
7845 case IW_AUTH_RX_UNENCRYPTED_EAPOL
:
7846 param
->value
= ieee
->ieee802_1x
;
7849 case IW_AUTH_ROAMING_CONTROL
:
7850 case IW_AUTH_PRIVACY_INVOKED
:
7851 param
->value
= ieee
->privacy_invoked
;
7860 /* SIOCSIWENCODEEXT */
7861 static int ipw2100_wx_set_encodeext(struct net_device
*dev
,
7862 struct iw_request_info
*info
,
7863 union iwreq_data
*wrqu
, char *extra
)
7865 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7866 return libipw_wx_set_encodeext(priv
->ieee
, info
, wrqu
, extra
);
7869 /* SIOCGIWENCODEEXT */
7870 static int ipw2100_wx_get_encodeext(struct net_device
*dev
,
7871 struct iw_request_info
*info
,
7872 union iwreq_data
*wrqu
, char *extra
)
7874 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7875 return libipw_wx_get_encodeext(priv
->ieee
, info
, wrqu
, extra
);
7879 static int ipw2100_wx_set_mlme(struct net_device
*dev
,
7880 struct iw_request_info
*info
,
7881 union iwreq_data
*wrqu
, char *extra
)
7883 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7884 struct iw_mlme
*mlme
= (struct iw_mlme
*)extra
;
7887 reason
= cpu_to_le16(mlme
->reason_code
);
7889 switch (mlme
->cmd
) {
7890 case IW_MLME_DEAUTH
:
7894 case IW_MLME_DISASSOC
:
7895 ipw2100_disassociate_bssid(priv
);
7909 #ifdef CONFIG_IPW2100_MONITOR
7910 static int ipw2100_wx_set_promisc(struct net_device
*dev
,
7911 struct iw_request_info
*info
,
7912 union iwreq_data
*wrqu
, char *extra
)
7914 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7915 int *parms
= (int *)extra
;
7916 int enable
= (parms
[0] > 0);
7919 mutex_lock(&priv
->action_mutex
);
7920 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7926 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
7927 err
= ipw2100_set_channel(priv
, parms
[1], 0);
7930 priv
->channel
= parms
[1];
7931 err
= ipw2100_switch_mode(priv
, IW_MODE_MONITOR
);
7933 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
7934 err
= ipw2100_switch_mode(priv
, priv
->last_mode
);
7937 mutex_unlock(&priv
->action_mutex
);
7941 static int ipw2100_wx_reset(struct net_device
*dev
,
7942 struct iw_request_info
*info
,
7943 union iwreq_data
*wrqu
, char *extra
)
7945 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7946 if (priv
->status
& STATUS_INITIALIZED
)
7947 schedule_reset(priv
);
7953 static int ipw2100_wx_set_powermode(struct net_device
*dev
,
7954 struct iw_request_info
*info
,
7955 union iwreq_data
*wrqu
, char *extra
)
7957 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7958 int err
= 0, mode
= *(int *)extra
;
7960 mutex_lock(&priv
->action_mutex
);
7961 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7966 if ((mode
< 0) || (mode
> POWER_MODES
))
7967 mode
= IPW_POWER_AUTO
;
7969 if (IPW_POWER_LEVEL(priv
->power_mode
) != mode
)
7970 err
= ipw2100_set_power_mode(priv
, mode
);
7972 mutex_unlock(&priv
->action_mutex
);
7976 #define MAX_POWER_STRING 80
7977 static int ipw2100_wx_get_powermode(struct net_device
*dev
,
7978 struct iw_request_info
*info
,
7979 union iwreq_data
*wrqu
, char *extra
)
7982 * This can be called at any time. No action lock required
7985 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7986 int level
= IPW_POWER_LEVEL(priv
->power_mode
);
7987 s32 timeout
, period
;
7989 if (!(priv
->power_mode
& IPW_POWER_ENABLED
)) {
7990 snprintf(extra
, MAX_POWER_STRING
,
7991 "Power save level: %d (Off)", level
);
7994 case IPW_POWER_MODE_CAM
:
7995 snprintf(extra
, MAX_POWER_STRING
,
7996 "Power save level: %d (None)", level
);
7998 case IPW_POWER_AUTO
:
7999 snprintf(extra
, MAX_POWER_STRING
,
8000 "Power save level: %d (Auto)", level
);
8003 timeout
= timeout_duration
[level
- 1] / 1000;
8004 period
= period_duration
[level
- 1] / 1000;
8005 snprintf(extra
, MAX_POWER_STRING
,
8006 "Power save level: %d "
8007 "(Timeout %dms, Period %dms)",
8008 level
, timeout
, period
);
8012 wrqu
->data
.length
= strlen(extra
) + 1;
8017 static int ipw2100_wx_set_preamble(struct net_device
*dev
,
8018 struct iw_request_info
*info
,
8019 union iwreq_data
*wrqu
, char *extra
)
8021 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8022 int err
, mode
= *(int *)extra
;
8024 mutex_lock(&priv
->action_mutex
);
8025 if (!(priv
->status
& STATUS_INITIALIZED
)) {
8031 priv
->config
|= CFG_LONG_PREAMBLE
;
8033 priv
->config
&= ~CFG_LONG_PREAMBLE
;
8039 err
= ipw2100_system_config(priv
, 0);
8042 mutex_unlock(&priv
->action_mutex
);
8046 static int ipw2100_wx_get_preamble(struct net_device
*dev
,
8047 struct iw_request_info
*info
,
8048 union iwreq_data
*wrqu
, char *extra
)
8051 * This can be called at any time. No action lock required
8054 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8056 if (priv
->config
& CFG_LONG_PREAMBLE
)
8057 snprintf(wrqu
->name
, IFNAMSIZ
, "long (1)");
8059 snprintf(wrqu
->name
, IFNAMSIZ
, "auto (0)");
8064 #ifdef CONFIG_IPW2100_MONITOR
8065 static int ipw2100_wx_set_crc_check(struct net_device
*dev
,
8066 struct iw_request_info
*info
,
8067 union iwreq_data
*wrqu
, char *extra
)
8069 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8070 int err
, mode
= *(int *)extra
;
8072 mutex_lock(&priv
->action_mutex
);
8073 if (!(priv
->status
& STATUS_INITIALIZED
)) {
8079 priv
->config
|= CFG_CRC_CHECK
;
8081 priv
->config
&= ~CFG_CRC_CHECK
;
8089 mutex_unlock(&priv
->action_mutex
);
8093 static int ipw2100_wx_get_crc_check(struct net_device
*dev
,
8094 struct iw_request_info
*info
,
8095 union iwreq_data
*wrqu
, char *extra
)
8098 * This can be called at any time. No action lock required
8101 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8103 if (priv
->config
& CFG_CRC_CHECK
)
8104 snprintf(wrqu
->name
, IFNAMSIZ
, "CRC checked (1)");
8106 snprintf(wrqu
->name
, IFNAMSIZ
, "CRC ignored (0)");
8110 #endif /* CONFIG_IPW2100_MONITOR */
8112 static iw_handler ipw2100_wx_handlers
[] = {
8113 NULL
, /* SIOCSIWCOMMIT */
8114 ipw2100_wx_get_name
, /* SIOCGIWNAME */
8115 NULL
, /* SIOCSIWNWID */
8116 NULL
, /* SIOCGIWNWID */
8117 ipw2100_wx_set_freq
, /* SIOCSIWFREQ */
8118 ipw2100_wx_get_freq
, /* SIOCGIWFREQ */
8119 ipw2100_wx_set_mode
, /* SIOCSIWMODE */
8120 ipw2100_wx_get_mode
, /* SIOCGIWMODE */
8121 NULL
, /* SIOCSIWSENS */
8122 NULL
, /* SIOCGIWSENS */
8123 NULL
, /* SIOCSIWRANGE */
8124 ipw2100_wx_get_range
, /* SIOCGIWRANGE */
8125 NULL
, /* SIOCSIWPRIV */
8126 NULL
, /* SIOCGIWPRIV */
8127 NULL
, /* SIOCSIWSTATS */
8128 NULL
, /* SIOCGIWSTATS */
8129 NULL
, /* SIOCSIWSPY */
8130 NULL
, /* SIOCGIWSPY */
8131 NULL
, /* SIOCGIWTHRSPY */
8132 NULL
, /* SIOCWIWTHRSPY */
8133 ipw2100_wx_set_wap
, /* SIOCSIWAP */
8134 ipw2100_wx_get_wap
, /* SIOCGIWAP */
8135 ipw2100_wx_set_mlme
, /* SIOCSIWMLME */
8136 NULL
, /* SIOCGIWAPLIST -- deprecated */
8137 ipw2100_wx_set_scan
, /* SIOCSIWSCAN */
8138 ipw2100_wx_get_scan
, /* SIOCGIWSCAN */
8139 ipw2100_wx_set_essid
, /* SIOCSIWESSID */
8140 ipw2100_wx_get_essid
, /* SIOCGIWESSID */
8141 ipw2100_wx_set_nick
, /* SIOCSIWNICKN */
8142 ipw2100_wx_get_nick
, /* SIOCGIWNICKN */
8143 NULL
, /* -- hole -- */
8144 NULL
, /* -- hole -- */
8145 ipw2100_wx_set_rate
, /* SIOCSIWRATE */
8146 ipw2100_wx_get_rate
, /* SIOCGIWRATE */
8147 ipw2100_wx_set_rts
, /* SIOCSIWRTS */
8148 ipw2100_wx_get_rts
, /* SIOCGIWRTS */
8149 ipw2100_wx_set_frag
, /* SIOCSIWFRAG */
8150 ipw2100_wx_get_frag
, /* SIOCGIWFRAG */
8151 ipw2100_wx_set_txpow
, /* SIOCSIWTXPOW */
8152 ipw2100_wx_get_txpow
, /* SIOCGIWTXPOW */
8153 ipw2100_wx_set_retry
, /* SIOCSIWRETRY */
8154 ipw2100_wx_get_retry
, /* SIOCGIWRETRY */
8155 ipw2100_wx_set_encode
, /* SIOCSIWENCODE */
8156 ipw2100_wx_get_encode
, /* SIOCGIWENCODE */
8157 ipw2100_wx_set_power
, /* SIOCSIWPOWER */
8158 ipw2100_wx_get_power
, /* SIOCGIWPOWER */
8159 NULL
, /* -- hole -- */
8160 NULL
, /* -- hole -- */
8161 ipw2100_wx_set_genie
, /* SIOCSIWGENIE */
8162 ipw2100_wx_get_genie
, /* SIOCGIWGENIE */
8163 ipw2100_wx_set_auth
, /* SIOCSIWAUTH */
8164 ipw2100_wx_get_auth
, /* SIOCGIWAUTH */
8165 ipw2100_wx_set_encodeext
, /* SIOCSIWENCODEEXT */
8166 ipw2100_wx_get_encodeext
, /* SIOCGIWENCODEEXT */
8167 NULL
, /* SIOCSIWPMKSA */
8170 #define IPW2100_PRIV_SET_MONITOR SIOCIWFIRSTPRIV
8171 #define IPW2100_PRIV_RESET SIOCIWFIRSTPRIV+1
8172 #define IPW2100_PRIV_SET_POWER SIOCIWFIRSTPRIV+2
8173 #define IPW2100_PRIV_GET_POWER SIOCIWFIRSTPRIV+3
8174 #define IPW2100_PRIV_SET_LONGPREAMBLE SIOCIWFIRSTPRIV+4
8175 #define IPW2100_PRIV_GET_LONGPREAMBLE SIOCIWFIRSTPRIV+5
8176 #define IPW2100_PRIV_SET_CRC_CHECK SIOCIWFIRSTPRIV+6
8177 #define IPW2100_PRIV_GET_CRC_CHECK SIOCIWFIRSTPRIV+7
8179 static const struct iw_priv_args ipw2100_private_args
[] = {
8181 #ifdef CONFIG_IPW2100_MONITOR
8183 IPW2100_PRIV_SET_MONITOR
,
8184 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 2, 0, "monitor"},
8187 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 0, 0, "reset"},
8188 #endif /* CONFIG_IPW2100_MONITOR */
8191 IPW2100_PRIV_SET_POWER
,
8192 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_power"},
8194 IPW2100_PRIV_GET_POWER
,
8195 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| MAX_POWER_STRING
,
8198 IPW2100_PRIV_SET_LONGPREAMBLE
,
8199 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_preamble"},
8201 IPW2100_PRIV_GET_LONGPREAMBLE
,
8202 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| IFNAMSIZ
, "get_preamble"},
8203 #ifdef CONFIG_IPW2100_MONITOR
8205 IPW2100_PRIV_SET_CRC_CHECK
,
8206 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_crc_check"},
8208 IPW2100_PRIV_GET_CRC_CHECK
,
8209 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| IFNAMSIZ
, "get_crc_check"},
8210 #endif /* CONFIG_IPW2100_MONITOR */
8213 static iw_handler ipw2100_private_handler
[] = {
8214 #ifdef CONFIG_IPW2100_MONITOR
8215 ipw2100_wx_set_promisc
,
8217 #else /* CONFIG_IPW2100_MONITOR */
8220 #endif /* CONFIG_IPW2100_MONITOR */
8221 ipw2100_wx_set_powermode
,
8222 ipw2100_wx_get_powermode
,
8223 ipw2100_wx_set_preamble
,
8224 ipw2100_wx_get_preamble
,
8225 #ifdef CONFIG_IPW2100_MONITOR
8226 ipw2100_wx_set_crc_check
,
8227 ipw2100_wx_get_crc_check
,
8228 #else /* CONFIG_IPW2100_MONITOR */
8231 #endif /* CONFIG_IPW2100_MONITOR */
8235 * Get wireless statistics.
8236 * Called by /proc/net/wireless
8237 * Also called by SIOCGIWSTATS
8239 static struct iw_statistics
*ipw2100_wx_wireless_stats(struct net_device
*dev
)
8254 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8255 struct iw_statistics
*wstats
;
8256 u32 rssi
, tx_retries
, missed_beacons
, tx_failures
;
8257 u32 ord_len
= sizeof(u32
);
8260 return (struct iw_statistics
*)NULL
;
8262 wstats
= &priv
->wstats
;
8264 /* if hw is disabled, then ipw2100_get_ordinal() can't be called.
8265 * ipw2100_wx_wireless_stats seems to be called before fw is
8266 * initialized. STATUS_ASSOCIATED will only be set if the hw is up
8267 * and associated; if not associcated, the values are all meaningless
8268 * anyway, so set them all to NULL and INVALID */
8269 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8270 wstats
->miss
.beacon
= 0;
8271 wstats
->discard
.retries
= 0;
8272 wstats
->qual
.qual
= 0;
8273 wstats
->qual
.level
= 0;
8274 wstats
->qual
.noise
= 0;
8275 wstats
->qual
.updated
= 7;
8276 wstats
->qual
.updated
|= IW_QUAL_NOISE_INVALID
|
8277 IW_QUAL_QUAL_INVALID
| IW_QUAL_LEVEL_INVALID
;
8281 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_PERCENT_MISSED_BCNS
,
8282 &missed_beacons
, &ord_len
))
8283 goto fail_get_ordinal
;
8285 /* If we don't have a connection the quality and level is 0 */
8286 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8287 wstats
->qual
.qual
= 0;
8288 wstats
->qual
.level
= 0;
8290 if (ipw2100_get_ordinal(priv
, IPW_ORD_RSSI_AVG_CURR
,
8292 goto fail_get_ordinal
;
8293 wstats
->qual
.level
= rssi
+ IPW2100_RSSI_TO_DBM
;
8295 rssi_qual
= rssi
* POOR
/ 10;
8297 rssi_qual
= (rssi
- 10) * (FAIR
- POOR
) / 5 + POOR
;
8299 rssi_qual
= (rssi
- 15) * (GOOD
- FAIR
) / 5 + FAIR
;
8301 rssi_qual
= (rssi
- 20) * (VERY_GOOD
- GOOD
) /
8304 rssi_qual
= (rssi
- 30) * (PERFECT
- VERY_GOOD
) /
8307 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_PERCENT_RETRIES
,
8308 &tx_retries
, &ord_len
))
8309 goto fail_get_ordinal
;
8311 if (tx_retries
> 75)
8312 tx_qual
= (90 - tx_retries
) * POOR
/ 15;
8313 else if (tx_retries
> 70)
8314 tx_qual
= (75 - tx_retries
) * (FAIR
- POOR
) / 5 + POOR
;
8315 else if (tx_retries
> 65)
8316 tx_qual
= (70 - tx_retries
) * (GOOD
- FAIR
) / 5 + FAIR
;
8317 else if (tx_retries
> 50)
8318 tx_qual
= (65 - tx_retries
) * (VERY_GOOD
- GOOD
) /
8321 tx_qual
= (50 - tx_retries
) *
8322 (PERFECT
- VERY_GOOD
) / 50 + VERY_GOOD
;
8324 if (missed_beacons
> 50)
8325 beacon_qual
= (60 - missed_beacons
) * POOR
/ 10;
8326 else if (missed_beacons
> 40)
8327 beacon_qual
= (50 - missed_beacons
) * (FAIR
- POOR
) /
8329 else if (missed_beacons
> 32)
8330 beacon_qual
= (40 - missed_beacons
) * (GOOD
- FAIR
) /
8332 else if (missed_beacons
> 20)
8333 beacon_qual
= (32 - missed_beacons
) *
8334 (VERY_GOOD
- GOOD
) / 20 + GOOD
;
8336 beacon_qual
= (20 - missed_beacons
) *
8337 (PERFECT
- VERY_GOOD
) / 20 + VERY_GOOD
;
8339 quality
= min(tx_qual
, rssi_qual
);
8340 quality
= min(beacon_qual
, quality
);
8342 #ifdef CONFIG_IPW2100_DEBUG
8343 if (beacon_qual
== quality
)
8344 IPW_DEBUG_WX("Quality clamped by Missed Beacons\n");
8345 else if (tx_qual
== quality
)
8346 IPW_DEBUG_WX("Quality clamped by Tx Retries\n");
8347 else if (quality
!= 100)
8348 IPW_DEBUG_WX("Quality clamped by Signal Strength\n");
8350 IPW_DEBUG_WX("Quality not clamped.\n");
8353 wstats
->qual
.qual
= quality
;
8354 wstats
->qual
.level
= rssi
+ IPW2100_RSSI_TO_DBM
;
8357 wstats
->qual
.noise
= 0;
8358 wstats
->qual
.updated
= 7;
8359 wstats
->qual
.updated
|= IW_QUAL_NOISE_INVALID
;
8361 /* FIXME: this is percent and not a # */
8362 wstats
->miss
.beacon
= missed_beacons
;
8364 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_TX_FAILURES
,
8365 &tx_failures
, &ord_len
))
8366 goto fail_get_ordinal
;
8367 wstats
->discard
.retries
= tx_failures
;
8372 IPW_DEBUG_WX("failed querying ordinals.\n");
8374 return (struct iw_statistics
*)NULL
;
8377 static struct iw_handler_def ipw2100_wx_handler_def
= {
8378 .standard
= ipw2100_wx_handlers
,
8379 .num_standard
= ARRAY_SIZE(ipw2100_wx_handlers
),
8380 .num_private
= ARRAY_SIZE(ipw2100_private_handler
),
8381 .num_private_args
= ARRAY_SIZE(ipw2100_private_args
),
8382 .private = (iw_handler
*) ipw2100_private_handler
,
8383 .private_args
= (struct iw_priv_args
*)ipw2100_private_args
,
8384 .get_wireless_stats
= ipw2100_wx_wireless_stats
,
8387 static void ipw2100_wx_event_work(struct work_struct
*work
)
8389 struct ipw2100_priv
*priv
=
8390 container_of(work
, struct ipw2100_priv
, wx_event_work
.work
);
8391 union iwreq_data wrqu
;
8392 unsigned int len
= ETH_ALEN
;
8394 if (priv
->status
& STATUS_STOPPING
)
8397 mutex_lock(&priv
->action_mutex
);
8399 IPW_DEBUG_WX("enter\n");
8401 mutex_unlock(&priv
->action_mutex
);
8403 wrqu
.ap_addr
.sa_family
= ARPHRD_ETHER
;
8405 /* Fetch BSSID from the hardware */
8406 if (!(priv
->status
& (STATUS_ASSOCIATING
| STATUS_ASSOCIATED
)) ||
8407 priv
->status
& STATUS_RF_KILL_MASK
||
8408 ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
,
8409 &priv
->bssid
, &len
)) {
8410 memset(wrqu
.ap_addr
.sa_data
, 0, ETH_ALEN
);
8412 /* We now have the BSSID, so can finish setting to the full
8413 * associated state */
8414 memcpy(wrqu
.ap_addr
.sa_data
, priv
->bssid
, ETH_ALEN
);
8415 memcpy(priv
->ieee
->bssid
, priv
->bssid
, ETH_ALEN
);
8416 priv
->status
&= ~STATUS_ASSOCIATING
;
8417 priv
->status
|= STATUS_ASSOCIATED
;
8418 netif_carrier_on(priv
->net_dev
);
8419 netif_wake_queue(priv
->net_dev
);
8422 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8423 IPW_DEBUG_WX("Configuring ESSID\n");
8424 mutex_lock(&priv
->action_mutex
);
8425 /* This is a disassociation event, so kick the firmware to
8426 * look for another AP */
8427 if (priv
->config
& CFG_STATIC_ESSID
)
8428 ipw2100_set_essid(priv
, priv
->essid
, priv
->essid_len
,
8431 ipw2100_set_essid(priv
, NULL
, 0, 0);
8432 mutex_unlock(&priv
->action_mutex
);
8435 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
8438 #define IPW2100_FW_MAJOR_VERSION 1
8439 #define IPW2100_FW_MINOR_VERSION 3
8441 #define IPW2100_FW_MINOR(x) ((x & 0xff) >> 8)
8442 #define IPW2100_FW_MAJOR(x) (x & 0xff)
8444 #define IPW2100_FW_VERSION ((IPW2100_FW_MINOR_VERSION << 8) | \
8445 IPW2100_FW_MAJOR_VERSION)
8447 #define IPW2100_FW_PREFIX "ipw2100-" __stringify(IPW2100_FW_MAJOR_VERSION) \
8448 "." __stringify(IPW2100_FW_MINOR_VERSION)
8450 #define IPW2100_FW_NAME(x) IPW2100_FW_PREFIX "" x ".fw"
8454 BINARY FIRMWARE HEADER FORMAT
8458 2 2 mode == 0:BSS,1:IBSS,2:MONITOR
8461 C fw_len firmware data
8462 12 + fw_len uc_len microcode data
8466 struct ipw2100_fw_header
{
8469 unsigned int fw_size
;
8470 unsigned int uc_size
;
8473 static int ipw2100_mod_firmware_load(struct ipw2100_fw
*fw
)
8475 struct ipw2100_fw_header
*h
=
8476 (struct ipw2100_fw_header
*)fw
->fw_entry
->data
;
8478 if (IPW2100_FW_MAJOR(h
->version
) != IPW2100_FW_MAJOR_VERSION
) {
8479 printk(KERN_WARNING DRV_NAME
": Firmware image not compatible "
8480 "(detected version id of %u). "
8481 "See Documentation/networking/README.ipw2100\n",
8486 fw
->version
= h
->version
;
8487 fw
->fw
.data
= fw
->fw_entry
->data
+ sizeof(struct ipw2100_fw_header
);
8488 fw
->fw
.size
= h
->fw_size
;
8489 fw
->uc
.data
= fw
->fw
.data
+ h
->fw_size
;
8490 fw
->uc
.size
= h
->uc_size
;
8495 static int ipw2100_get_firmware(struct ipw2100_priv
*priv
,
8496 struct ipw2100_fw
*fw
)
8501 IPW_DEBUG_INFO("%s: Using hotplug firmware load.\n",
8502 priv
->net_dev
->name
);
8504 switch (priv
->ieee
->iw_mode
) {
8506 fw_name
= IPW2100_FW_NAME("-i");
8508 #ifdef CONFIG_IPW2100_MONITOR
8509 case IW_MODE_MONITOR
:
8510 fw_name
= IPW2100_FW_NAME("-p");
8515 fw_name
= IPW2100_FW_NAME("");
8519 rc
= request_firmware(&fw
->fw_entry
, fw_name
, &priv
->pci_dev
->dev
);
8522 printk(KERN_ERR DRV_NAME
": "
8523 "%s: Firmware '%s' not available or load failed.\n",
8524 priv
->net_dev
->name
, fw_name
);
8527 IPW_DEBUG_INFO("firmware data %p size %zd\n", fw
->fw_entry
->data
,
8528 fw
->fw_entry
->size
);
8530 ipw2100_mod_firmware_load(fw
);
8535 MODULE_FIRMWARE(IPW2100_FW_NAME("-i"));
8536 #ifdef CONFIG_IPW2100_MONITOR
8537 MODULE_FIRMWARE(IPW2100_FW_NAME("-p"));
8539 MODULE_FIRMWARE(IPW2100_FW_NAME(""));
8541 static void ipw2100_release_firmware(struct ipw2100_priv
*priv
,
8542 struct ipw2100_fw
*fw
)
8546 release_firmware(fw
->fw_entry
);
8547 fw
->fw_entry
= NULL
;
8550 static int ipw2100_get_fwversion(struct ipw2100_priv
*priv
, char *buf
,
8553 char ver
[MAX_FW_VERSION_LEN
];
8554 u32 len
= MAX_FW_VERSION_LEN
;
8557 /* firmware version is an ascii string (max len of 14) */
8558 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_FW_VER_NUM
, ver
, &len
))
8563 for (i
= 0; i
< len
; i
++)
8569 static int ipw2100_get_ucodeversion(struct ipw2100_priv
*priv
, char *buf
,
8573 u32 len
= sizeof(ver
);
8574 /* microcode version is a 32 bit integer */
8575 if (ipw2100_get_ordinal(priv
, IPW_ORD_UCODE_VERSION
, &ver
, &len
))
8577 return snprintf(buf
, max
, "%08X", ver
);
8581 * On exit, the firmware will have been freed from the fw list
8583 static int ipw2100_fw_download(struct ipw2100_priv
*priv
, struct ipw2100_fw
*fw
)
8585 /* firmware is constructed of N contiguous entries, each entry is
8589 * 0 4 address to write to
8590 * 4 2 length of data run
8596 const unsigned char *firmware_data
= fw
->fw
.data
;
8597 unsigned int firmware_data_left
= fw
->fw
.size
;
8599 while (firmware_data_left
> 0) {
8600 addr
= *(u32
*) (firmware_data
);
8602 firmware_data_left
-= 4;
8604 len
= *(u16
*) (firmware_data
);
8606 firmware_data_left
-= 2;
8609 printk(KERN_ERR DRV_NAME
": "
8610 "Invalid firmware run-length of %d bytes\n",
8615 write_nic_memory(priv
->net_dev
, addr
, len
, firmware_data
);
8616 firmware_data
+= len
;
8617 firmware_data_left
-= len
;
8623 struct symbol_alive_response
{
8632 u16 clock_settle_time
; // 1us LSB
8633 u16 powerup_settle_time
; // 1us LSB
8634 u16 hop_settle_time
; // 1us LSB
8635 u8 date
[3]; // month, day, year
8636 u8 time
[2]; // hours, minutes
8640 static int ipw2100_ucode_download(struct ipw2100_priv
*priv
,
8641 struct ipw2100_fw
*fw
)
8643 struct net_device
*dev
= priv
->net_dev
;
8644 const unsigned char *microcode_data
= fw
->uc
.data
;
8645 unsigned int microcode_data_left
= fw
->uc
.size
;
8646 void __iomem
*reg
= (void __iomem
*)dev
->base_addr
;
8648 struct symbol_alive_response response
;
8652 /* Symbol control */
8653 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x703);
8655 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x707);
8659 write_nic_byte(dev
, 0x210014, 0x72); /* fifo width =16 */
8661 write_nic_byte(dev
, 0x210014, 0x72); /* fifo width =16 */
8664 /* EN_CS_ACCESS bit to reset control store pointer */
8665 write_nic_byte(dev
, 0x210000, 0x40);
8667 write_nic_byte(dev
, 0x210000, 0x0);
8669 write_nic_byte(dev
, 0x210000, 0x40);
8672 /* copy microcode from buffer into Symbol */
8674 while (microcode_data_left
> 0) {
8675 write_nic_byte(dev
, 0x210010, *microcode_data
++);
8676 write_nic_byte(dev
, 0x210010, *microcode_data
++);
8677 microcode_data_left
-= 2;
8680 /* EN_CS_ACCESS bit to reset the control store pointer */
8681 write_nic_byte(dev
, 0x210000, 0x0);
8684 /* Enable System (Reg 0)
8685 * first enable causes garbage in RX FIFO */
8686 write_nic_byte(dev
, 0x210000, 0x0);
8688 write_nic_byte(dev
, 0x210000, 0x80);
8691 /* Reset External Baseband Reg */
8692 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x703);
8694 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x707);
8697 /* HW Config (Reg 5) */
8698 write_nic_byte(dev
, 0x210014, 0x72); // fifo width =16
8700 write_nic_byte(dev
, 0x210014, 0x72); // fifo width =16
8703 /* Enable System (Reg 0)
8704 * second enable should be OK */
8705 write_nic_byte(dev
, 0x210000, 0x00); // clear enable system
8707 write_nic_byte(dev
, 0x210000, 0x80); // set enable system
8709 /* check Symbol is enabled - upped this from 5 as it wasn't always
8710 * catching the update */
8711 for (i
= 0; i
< 10; i
++) {
8714 /* check Dino is enabled bit */
8715 read_nic_byte(dev
, 0x210000, &data
);
8721 printk(KERN_ERR DRV_NAME
": %s: Error initializing Symbol\n",
8726 /* Get Symbol alive response */
8727 for (i
= 0; i
< 30; i
++) {
8728 /* Read alive response structure */
8730 j
< (sizeof(struct symbol_alive_response
) >> 1); j
++)
8731 read_nic_word(dev
, 0x210004, ((u16
*) & response
) + j
);
8733 if ((response
.cmd_id
== 1) && (response
.ucode_valid
== 0x1))
8739 printk(KERN_ERR DRV_NAME
8740 ": %s: No response from Symbol - hw not alive\n",
8742 printk_buf(IPW_DL_ERROR
, (u8
*) & response
, sizeof(response
));