?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
proc: use seq_puts()/seq_putc() where possible
[linux-2.6/next.git] / drivers / usb / gadget / omap_udc.c
blobcb5cd422f3f513a163d606fde97f0f2f646f48a8
1 /*
2 * omap_udc.c -- for OMAP full speed udc; most chips support OTG.
3 *
4 * Copyright (C) 2004 Texas Instruments, Inc.
5 * Copyright (C) 2004-2005 David Brownell
6 *
7 * OMAP2 & DMA support by Kyungmin Park <kyungmin.park@samsung.com>
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 */
23
24 #undef DEBUG
25 #undef VERBOSE
26
27 #include <linux/module.h>
28 #include <linux/kernel.h>
29 #include <linux/ioport.h>
30 #include <linux/types.h>
31 #include <linux/errno.h>
32 #include <linux/delay.h>
33 #include <linux/slab.h>
34 #include <linux/init.h>
35 #include <linux/timer.h>
36 #include <linux/list.h>
37 #include <linux/interrupt.h>
38 #include <linux/proc_fs.h>
39 #include <linux/mm.h>
40 #include <linux/moduleparam.h>
41 #include <linux/platform_device.h>
42 #include <linux/usb/ch9.h>
43 #include <linux/usb/gadget.h>
44 #include <linux/usb/otg.h>
45 #include <linux/dma-mapping.h>
46 #include <linux/clk.h>
47
48 #include <asm/byteorder.h>
49 #include <asm/io.h>
50 #include <asm/irq.h>
51 #include <asm/system.h>
52 #include <asm/unaligned.h>
53 #include <asm/mach-types.h>
54
55 #include <plat/dma.h>
56 #include <plat/usb.h>
57
58 #include "omap_udc.h"
59
60 #undef USB_TRACE
61
62 /* bulk DMA seems to be behaving for both IN and OUT */
63 #define USE_DMA
64
65 /* ISO too */
66 #define USE_ISO
67
68 #define DRIVER_DESC "OMAP UDC driver"
69 #define DRIVER_VERSION "4 October 2004"
70
71 #define DMA_ADDR_INVALID (~(dma_addr_t)0)
72
73 #define OMAP2_DMA_CH(ch) (((ch) - 1) << 1)
74 #define OMAP24XX_DMA(name, ch) (OMAP24XX_DMA_##name + OMAP2_DMA_CH(ch))
75
76 /*
77 * The OMAP UDC needs _very_ early endpoint setup: before enabling the
78 * D+ pullup to allow enumeration. That's too early for the gadget
79 * framework to use from usb_endpoint_enable(), which happens after
80 * enumeration as part of activating an interface. (But if we add an
81 * optional new "UDC not yet running" state to the gadget driver model,
82 * even just during driver binding, the endpoint autoconfig logic is the
83 * natural spot to manufacture new endpoints.)
84 *
85 * So instead of using endpoint enable calls to control the hardware setup,
86 * this driver defines a "fifo mode" parameter. It's used during driver
87 * initialization to choose among a set of pre-defined endpoint configs.
88 * See omap_udc_setup() for available modes, or to add others. That code
89 * lives in an init section, so use this driver as a module if you need
90 * to change the fifo mode after the kernel boots.
91 *
92 * Gadget drivers normally ignore endpoints they don't care about, and
93 * won't include them in configuration descriptors. That means only
94 * misbehaving hosts would even notice they exist.
95 */
96 #ifdef USE_ISO
97 static unsigned fifo_mode = 3;
98 #else
99 static unsigned fifo_mode = 0;
100 #endif
101
102 /* "modprobe omap_udc fifo_mode=42", or else as a kernel
103 * boot parameter "omap_udc:fifo_mode=42"
104 */
105 module_param (fifo_mode, uint, 0);
106 MODULE_PARM_DESC (fifo_mode, "endpoint configuration");
107
108 #ifdef USE_DMA
109 static unsigned use_dma = 1;
110
111 /* "modprobe omap_udc use_dma=y", or else as a kernel
112 * boot parameter "omap_udc:use_dma=y"
113 */
114 module_param (use_dma, bool, 0);
115 MODULE_PARM_DESC (use_dma, "enable/disable DMA");
116 #else /* !USE_DMA */
117
118 /* save a bit of code */
119 #define use_dma 0
120 #endif /* !USE_DMA */
121
122
123 static const char driver_name [] = "omap_udc";
124 static const char driver_desc [] = DRIVER_DESC;
125
126 /*-------------------------------------------------------------------------*/
127
128 /* there's a notion of "current endpoint" for modifying endpoint
129 * state, and PIO access to its FIFO.
130 */
131
132 static void use_ep(struct omap_ep *ep, u16 select)
133 {
134 u16 num = ep->bEndpointAddress & 0x0f;
135
136 if (ep->bEndpointAddress & USB_DIR_IN)
137 num |= UDC_EP_DIR;
138 omap_writew(num | select, UDC_EP_NUM);
139 /* when select, MUST deselect later !! */
140 }
141
142 static inline void deselect_ep(void)
143 {
144 u16 w;
145
146 w = omap_readw(UDC_EP_NUM);
147 w &= ~UDC_EP_SEL;
148 omap_writew(w, UDC_EP_NUM);
149 /* 6 wait states before TX will happen */
150 }
151
152 static void dma_channel_claim(struct omap_ep *ep, unsigned preferred);
153
154 /*-------------------------------------------------------------------------*/
155
156 static int omap_ep_enable(struct usb_ep *_ep,
157 const struct usb_endpoint_descriptor *desc)
158 {
159 struct omap_ep *ep = container_of(_ep, struct omap_ep, ep);
160 struct omap_udc *udc;
161 unsigned long flags;
162 u16 maxp;
163
164 /* catch various bogus parameters */
165 if (!_ep || !desc || ep->desc
166 || desc->bDescriptorType != USB_DT_ENDPOINT
167 || ep->bEndpointAddress != desc->bEndpointAddress
168 || ep->maxpacket < le16_to_cpu
169 (desc->wMaxPacketSize)) {
170 DBG("%s, bad ep or descriptor\n", __func__);
171 return -EINVAL;
172 }
173 maxp = le16_to_cpu (desc->wMaxPacketSize);
174 if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
175 && maxp != ep->maxpacket)
176 || le16_to_cpu(desc->wMaxPacketSize) > ep->maxpacket
177 || !desc->wMaxPacketSize) {
178 DBG("%s, bad %s maxpacket\n", __func__, _ep->name);
179 return -ERANGE;
180 }
181
182 #ifdef USE_ISO
183 if ((desc->bmAttributes == USB_ENDPOINT_XFER_ISOC
184 && desc->bInterval != 1)) {
185 /* hardware wants period = 1; USB allows 2^(Interval-1) */
186 DBG("%s, unsupported ISO period %dms\n", _ep->name,
187 1 << (desc->bInterval - 1));
188 return -EDOM;
189 }
190 #else
191 if (desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
192 DBG("%s, ISO nyet\n", _ep->name);
193 return -EDOM;
194 }
195 #endif
196
197 /* xfer types must match, except that interrupt ~= bulk */
198 if (ep->bmAttributes != desc->bmAttributes
199 && ep->bmAttributes != USB_ENDPOINT_XFER_BULK
200 && desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
201 DBG("%s, %s type mismatch\n", __func__, _ep->name);
202 return -EINVAL;
203 }
204
205 udc = ep->udc;
206 if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
207 DBG("%s, bogus device state\n", __func__);
208 return -ESHUTDOWN;
209 }
210
211 spin_lock_irqsave(&udc->lock, flags);
212
213 ep->desc = desc;
214 ep->irqs = 0;
215 ep->stopped = 0;
216 ep->ep.maxpacket = maxp;
217
218 /* set endpoint to initial state */
219 ep->dma_channel = 0;
220 ep->has_dma = 0;
221 ep->lch = -1;
222 use_ep(ep, UDC_EP_SEL);
223 omap_writew(udc->clr_halt, UDC_CTRL);
224 ep->ackwait = 0;
225 deselect_ep();
226
227 if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
228 list_add(&ep->iso, &udc->iso);
229
230 /* maybe assign a DMA channel to this endpoint */
231 if (use_dma && desc->bmAttributes == USB_ENDPOINT_XFER_BULK)
232 /* FIXME ISO can dma, but prefers first channel */
233 dma_channel_claim(ep, 0);
234
235 /* PIO OUT may RX packets */
236 if (desc->bmAttributes != USB_ENDPOINT_XFER_ISOC
237 && !ep->has_dma
238 && !(ep->bEndpointAddress & USB_DIR_IN)) {
239 omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
240 ep->ackwait = 1 + ep->double_buf;
241 }
242
243 spin_unlock_irqrestore(&udc->lock, flags);
244 VDBG("%s enabled\n", _ep->name);
245 return 0;
246 }
247
248 static void nuke(struct omap_ep *, int status);
249
250 static int omap_ep_disable(struct usb_ep *_ep)
251 {
252 struct omap_ep *ep = container_of(_ep, struct omap_ep, ep);
253 unsigned long flags;
254
255 if (!_ep || !ep->desc) {
256 DBG("%s, %s not enabled\n", __func__,
257 _ep ? ep->ep.name : NULL);
258 return -EINVAL;
259 }
260
261 spin_lock_irqsave(&ep->udc->lock, flags);
262 ep->desc = NULL;
263 nuke (ep, -ESHUTDOWN);
264 ep->ep.maxpacket = ep->maxpacket;
265 ep->has_dma = 0;
266 omap_writew(UDC_SET_HALT, UDC_CTRL);
267 list_del_init(&ep->iso);
268 del_timer(&ep->timer);
269
270 spin_unlock_irqrestore(&ep->udc->lock, flags);
271
272 VDBG("%s disabled\n", _ep->name);
273 return 0;
274 }
275
276 /*-------------------------------------------------------------------------*/
277
278 static struct usb_request *
279 omap_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
280 {
281 struct omap_req *req;
282
283 req = kzalloc(sizeof(*req), gfp_flags);
284 if (req) {
285 req->req.dma = DMA_ADDR_INVALID;
286 INIT_LIST_HEAD (&req->queue);
287 }
288 return &req->req;
289 }
290
291 static void
292 omap_free_request(struct usb_ep *ep, struct usb_request *_req)
293 {
294 struct omap_req *req = container_of(_req, struct omap_req, req);
295
296 if (_req)
297 kfree (req);
298 }
299
300 /*-------------------------------------------------------------------------*/
301
302 static void
303 done(struct omap_ep *ep, struct omap_req *req, int status)
304 {
305 unsigned stopped = ep->stopped;
306
307 list_del_init(&req->queue);
308
309 if (req->req.status == -EINPROGRESS)
310 req->req.status = status;
311 else
312 status = req->req.status;
313
314 if (use_dma && ep->has_dma) {
315 if (req->mapped) {
316 dma_unmap_single(ep->udc->gadget.dev.parent,
317 req->req.dma, req->req.length,
318 (ep->bEndpointAddress & USB_DIR_IN)
319 ? DMA_TO_DEVICE
320 : DMA_FROM_DEVICE);
321 req->req.dma = DMA_ADDR_INVALID;
322 req->mapped = 0;
323 } else
324 dma_sync_single_for_cpu(ep->udc->gadget.dev.parent,
325 req->req.dma, req->req.length,
326 (ep->bEndpointAddress & USB_DIR_IN)
327 ? DMA_TO_DEVICE
328 : DMA_FROM_DEVICE);
329 }
330
331 #ifndef USB_TRACE
332 if (status && status != -ESHUTDOWN)
333 #endif
334 VDBG("complete %s req %p stat %d len %u/%u\n",
335 ep->ep.name, &req->req, status,
336 req->req.actual, req->req.length);
337
338 /* don't modify queue heads during completion callback */
339 ep->stopped = 1;
340 spin_unlock(&ep->udc->lock);
341 req->req.complete(&ep->ep, &req->req);
342 spin_lock(&ep->udc->lock);
343 ep->stopped = stopped;
344 }
345
346 /*-------------------------------------------------------------------------*/
347
348 #define UDC_FIFO_FULL (UDC_NON_ISO_FIFO_FULL | UDC_ISO_FIFO_FULL)
349 #define UDC_FIFO_UNWRITABLE (UDC_EP_HALTED | UDC_FIFO_FULL)
350
351 #define FIFO_EMPTY (UDC_NON_ISO_FIFO_EMPTY | UDC_ISO_FIFO_EMPTY)
352 #define FIFO_UNREADABLE (UDC_EP_HALTED | FIFO_EMPTY)
353
354 static inline int
355 write_packet(u8 *buf, struct omap_req *req, unsigned max)
356 {
357 unsigned len;
358 u16 *wp;
359
360 len = min(req->req.length - req->req.actual, max);
361 req->req.actual += len;
362
363 max = len;
364 if (likely((((int)buf) & 1) == 0)) {
365 wp = (u16 *)buf;
366 while (max >= 2) {
367 omap_writew(*wp++, UDC_DATA);
368 max -= 2;
369 }
370 buf = (u8 *)wp;
371 }
372 while (max--)
373 omap_writeb(*buf++, UDC_DATA);
374 return len;
375 }
376
377 // FIXME change r/w fifo calling convention
378
379
380 // return: 0 = still running, 1 = completed, negative = errno
381 static int write_fifo(struct omap_ep *ep, struct omap_req *req)
382 {
383 u8 *buf;
384 unsigned count;
385 int is_last;
386 u16 ep_stat;
387
388 buf = req->req.buf + req->req.actual;
389 prefetch(buf);
390
391 /* PIO-IN isn't double buffered except for iso */
392 ep_stat = omap_readw(UDC_STAT_FLG);
393 if (ep_stat & UDC_FIFO_UNWRITABLE)
394 return 0;
395
396 count = ep->ep.maxpacket;
397 count = write_packet(buf, req, count);
398 omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
399 ep->ackwait = 1;
400
401 /* last packet is often short (sometimes a zlp) */
402 if (count != ep->ep.maxpacket)
403 is_last = 1;
404 else if (req->req.length == req->req.actual
405 && !req->req.zero)
406 is_last = 1;
407 else
408 is_last = 0;
409
410 /* NOTE: requests complete when all IN data is in a
411 * FIFO (or sometimes later, if a zlp was needed).
412 * Use usb_ep_fifo_status() where needed.
413 */
414 if (is_last)
415 done(ep, req, 0);
416 return is_last;
417 }
418
419 static inline int
420 read_packet(u8 *buf, struct omap_req *req, unsigned avail)
421 {
422 unsigned len;
423 u16 *wp;
424
425 len = min(req->req.length - req->req.actual, avail);
426 req->req.actual += len;
427 avail = len;
428
429 if (likely((((int)buf) & 1) == 0)) {
430 wp = (u16 *)buf;
431 while (avail >= 2) {
432 *wp++ = omap_readw(UDC_DATA);
433 avail -= 2;
434 }
435 buf = (u8 *)wp;
436 }
437 while (avail--)
438 *buf++ = omap_readb(UDC_DATA);
439 return len;
440 }
441
442 // return: 0 = still running, 1 = queue empty, negative = errno
443 static int read_fifo(struct omap_ep *ep, struct omap_req *req)
444 {
445 u8 *buf;
446 unsigned count, avail;
447 int is_last;
448
449 buf = req->req.buf + req->req.actual;
450 prefetchw(buf);
451
452 for (;;) {
453 u16 ep_stat = omap_readw(UDC_STAT_FLG);
454
455 is_last = 0;
456 if (ep_stat & FIFO_EMPTY) {
457 if (!ep->double_buf)
458 break;
459 ep->fnf = 1;
460 }
461 if (ep_stat & UDC_EP_HALTED)
462 break;
463
464 if (ep_stat & UDC_FIFO_FULL)
465 avail = ep->ep.maxpacket;
466 else {
467 avail = omap_readw(UDC_RXFSTAT);
468 ep->fnf = ep->double_buf;
469 }
470 count = read_packet(buf, req, avail);
471
472 /* partial packet reads may not be errors */
473 if (count < ep->ep.maxpacket) {
474 is_last = 1;
475 /* overflowed this request? flush extra data */
476 if (count != avail) {
477 req->req.status = -EOVERFLOW;
478 avail -= count;
479 while (avail--)
480 omap_readw(UDC_DATA);
481 }
482 } else if (req->req.length == req->req.actual)
483 is_last = 1;
484 else
485 is_last = 0;
486
487 if (!ep->bEndpointAddress)
488 break;
489 if (is_last)
490 done(ep, req, 0);
491 break;
492 }
493 return is_last;
494 }
495
496 /*-------------------------------------------------------------------------*/
497
498 static u16 dma_src_len(struct omap_ep *ep, dma_addr_t start)
499 {
500 dma_addr_t end;
501
502 /* IN-DMA needs this on fault/cancel paths, so 15xx misreports
503 * the last transfer's bytecount by more than a FIFO's worth.
504 */
505 if (cpu_is_omap15xx())
506 return 0;
507
508 end = omap_get_dma_src_pos(ep->lch);
509 if (end == ep->dma_counter)
510 return 0;
511
512 end |= start & (0xffff << 16);
513 if (end < start)
514 end += 0x10000;
515 return end - start;
516 }
517
518 static u16 dma_dest_len(struct omap_ep *ep, dma_addr_t start)
519 {
520 dma_addr_t end;
521
522 end = omap_get_dma_dst_pos(ep->lch);
523 if (end == ep->dma_counter)
524 return 0;
525
526 end |= start & (0xffff << 16);
527 if (cpu_is_omap15xx())
528 end++;
529 if (end < start)
530 end += 0x10000;
531 return end - start;
532 }
533
534
535 /* Each USB transfer request using DMA maps to one or more DMA transfers.
536 * When DMA completion isn't request completion, the UDC continues with
537 * the next DMA transfer for that USB transfer.
538 */
539
540 static void next_in_dma(struct omap_ep *ep, struct omap_req *req)
541 {
542 u16 txdma_ctrl, w;
543 unsigned length = req->req.length - req->req.actual;
544 const int sync_mode = cpu_is_omap15xx()
545 ? OMAP_DMA_SYNC_FRAME
546 : OMAP_DMA_SYNC_ELEMENT;
547 int dma_trigger = 0;
548
549 if (cpu_is_omap24xx())
550 dma_trigger = OMAP24XX_DMA(USB_W2FC_TX0, ep->dma_channel);
551
552 /* measure length in either bytes or packets */
553 if ((cpu_is_omap16xx() && length <= UDC_TXN_TSC)
554 || (cpu_is_omap24xx() && length < ep->maxpacket)
555 || (cpu_is_omap15xx() && length < ep->maxpacket)) {
556 txdma_ctrl = UDC_TXN_EOT | length;
557 omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8,
558 length, 1, sync_mode, dma_trigger, 0);
559 } else {
560 length = min(length / ep->maxpacket,
561 (unsigned) UDC_TXN_TSC + 1);
562 txdma_ctrl = length;
563 omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16,
564 ep->ep.maxpacket >> 1, length, sync_mode,
565 dma_trigger, 0);
566 length *= ep->maxpacket;
567 }
568 omap_set_dma_src_params(ep->lch, OMAP_DMA_PORT_EMIFF,
569 OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual,
570 0, 0);
571
572 omap_start_dma(ep->lch);
573 ep->dma_counter = omap_get_dma_src_pos(ep->lch);
574 w = omap_readw(UDC_DMA_IRQ_EN);
575 w |= UDC_TX_DONE_IE(ep->dma_channel);
576 omap_writew(w, UDC_DMA_IRQ_EN);
577 omap_writew(UDC_TXN_START | txdma_ctrl, UDC_TXDMA(ep->dma_channel));
578 req->dma_bytes = length;
579 }
580
581 static void finish_in_dma(struct omap_ep *ep, struct omap_req *req, int status)
582 {
583 u16 w;
584
585 if (status == 0) {
586 req->req.actual += req->dma_bytes;
587
588 /* return if this request needs to send data or zlp */
589 if (req->req.actual < req->req.length)
590 return;
591 if (req->req.zero
592 && req->dma_bytes != 0
593 && (req->req.actual % ep->maxpacket) == 0)
594 return;
595 } else
596 req->req.actual += dma_src_len(ep, req->req.dma
597 + req->req.actual);
598
599 /* tx completion */
600 omap_stop_dma(ep->lch);
601 w = omap_readw(UDC_DMA_IRQ_EN);
602 w &= ~UDC_TX_DONE_IE(ep->dma_channel);
603 omap_writew(w, UDC_DMA_IRQ_EN);
604 done(ep, req, status);
605 }
606
607 static void next_out_dma(struct omap_ep *ep, struct omap_req *req)
608 {
609 unsigned packets = req->req.length - req->req.actual;
610 int dma_trigger = 0;
611 u16 w;
612
613 if (cpu_is_omap24xx())
614 dma_trigger = OMAP24XX_DMA(USB_W2FC_RX0, ep->dma_channel);
615
616 /* NOTE: we filtered out "short reads" before, so we know
617 * the buffer has only whole numbers of packets.
618 * except MODE SELECT(6) sent the 24 bytes data in OMAP24XX DMA mode
619 */
620 if (cpu_is_omap24xx() && packets < ep->maxpacket) {
621 omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8,
622 packets, 1, OMAP_DMA_SYNC_ELEMENT,
623 dma_trigger, 0);
624 req->dma_bytes = packets;
625 } else {
626 /* set up this DMA transfer, enable the fifo, start */
627 packets /= ep->ep.maxpacket;
628 packets = min(packets, (unsigned)UDC_RXN_TC + 1);
629 req->dma_bytes = packets * ep->ep.maxpacket;
630 omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16,
631 ep->ep.maxpacket >> 1, packets,
632 OMAP_DMA_SYNC_ELEMENT,
633 dma_trigger, 0);
634 }
635 omap_set_dma_dest_params(ep->lch, OMAP_DMA_PORT_EMIFF,
636 OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual,
637 0, 0);
638 ep->dma_counter = omap_get_dma_dst_pos(ep->lch);
639
640 omap_writew(UDC_RXN_STOP | (packets - 1), UDC_RXDMA(ep->dma_channel));
641 w = omap_readw(UDC_DMA_IRQ_EN);
642 w |= UDC_RX_EOT_IE(ep->dma_channel);
643 omap_writew(w, UDC_DMA_IRQ_EN);
644 omap_writew(ep->bEndpointAddress & 0xf, UDC_EP_NUM);
645 omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
646
647 omap_start_dma(ep->lch);
648 }
649
650 static void
651 finish_out_dma(struct omap_ep *ep, struct omap_req *req, int status, int one)
652 {
653 u16 count, w;
654
655 if (status == 0)
656 ep->dma_counter = (u16) (req->req.dma + req->req.actual);
657 count = dma_dest_len(ep, req->req.dma + req->req.actual);
658 count += req->req.actual;
659 if (one)
660 count--;
661 if (count <= req->req.length)
662 req->req.actual = count;
663
664 if (count != req->dma_bytes || status)
665 omap_stop_dma(ep->lch);
666
667 /* if this wasn't short, request may need another transfer */
668 else if (req->req.actual < req->req.length)
669 return;
670
671 /* rx completion */
672 w = omap_readw(UDC_DMA_IRQ_EN);
673 w &= ~UDC_RX_EOT_IE(ep->dma_channel);
674 omap_writew(w, UDC_DMA_IRQ_EN);
675 done(ep, req, status);
676 }
677
678 static void dma_irq(struct omap_udc *udc, u16 irq_src)
679 {
680 u16 dman_stat = omap_readw(UDC_DMAN_STAT);
681 struct omap_ep *ep;
682 struct omap_req *req;
683
684 /* IN dma: tx to host */
685 if (irq_src & UDC_TXN_DONE) {
686 ep = &udc->ep[16 + UDC_DMA_TX_SRC(dman_stat)];
687 ep->irqs++;
688 /* can see TXN_DONE after dma abort */
689 if (!list_empty(&ep->queue)) {
690 req = container_of(ep->queue.next,
691 struct omap_req, queue);
692 finish_in_dma(ep, req, 0);
693 }
694 omap_writew(UDC_TXN_DONE, UDC_IRQ_SRC);
695
696 if (!list_empty (&ep->queue)) {
697 req = container_of(ep->queue.next,
698 struct omap_req, queue);
699 next_in_dma(ep, req);
700 }
701 }
702
703 /* OUT dma: rx from host */
704 if (irq_src & UDC_RXN_EOT) {
705 ep = &udc->ep[UDC_DMA_RX_SRC(dman_stat)];
706 ep->irqs++;
707 /* can see RXN_EOT after dma abort */
708 if (!list_empty(&ep->queue)) {
709 req = container_of(ep->queue.next,
710 struct omap_req, queue);
711 finish_out_dma(ep, req, 0, dman_stat & UDC_DMA_RX_SB);
712 }
713 omap_writew(UDC_RXN_EOT, UDC_IRQ_SRC);
714
715 if (!list_empty (&ep->queue)) {
716 req = container_of(ep->queue.next,
717 struct omap_req, queue);
718 next_out_dma(ep, req);
719 }
720 }
721
722 if (irq_src & UDC_RXN_CNT) {
723 ep = &udc->ep[UDC_DMA_RX_SRC(dman_stat)];
724 ep->irqs++;
725 /* omap15xx does this unasked... */
726 VDBG("%s, RX_CNT irq?\n", ep->ep.name);
727 omap_writew(UDC_RXN_CNT, UDC_IRQ_SRC);
728 }
729 }
730
731 static void dma_error(int lch, u16 ch_status, void *data)
732 {
733 struct omap_ep *ep = data;
734
735 /* if ch_status & OMAP_DMA_DROP_IRQ ... */
736 /* if ch_status & OMAP1_DMA_TOUT_IRQ ... */
737 ERR("%s dma error, lch %d status %02x\n", ep->ep.name, lch, ch_status);
738
739 /* complete current transfer ... */
740 }
741
742 static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
743 {
744 u16 reg;
745 int status, restart, is_in;
746 int dma_channel;
747
748 is_in = ep->bEndpointAddress & USB_DIR_IN;
749 if (is_in)
750 reg = omap_readw(UDC_TXDMA_CFG);
751 else
752 reg = omap_readw(UDC_RXDMA_CFG);
753 reg |= UDC_DMA_REQ; /* "pulse" activated */
754
755 ep->dma_channel = 0;
756 ep->lch = -1;
757 if (channel == 0 || channel > 3) {
758 if ((reg & 0x0f00) == 0)
759 channel = 3;
760 else if ((reg & 0x00f0) == 0)
761 channel = 2;
762 else if ((reg & 0x000f) == 0) /* preferred for ISO */
763 channel = 1;
764 else {
765 status = -EMLINK;
766 goto just_restart;
767 }
768 }
769 reg |= (0x0f & ep->bEndpointAddress) << (4 * (channel - 1));
770 ep->dma_channel = channel;
771
772 if (is_in) {
773 if (cpu_is_omap24xx())
774 dma_channel = OMAP24XX_DMA(USB_W2FC_TX0, channel);
775 else
776 dma_channel = OMAP_DMA_USB_W2FC_TX0 - 1 + channel;
777 status = omap_request_dma(dma_channel,
778 ep->ep.name, dma_error, ep, &ep->lch);
779 if (status == 0) {
780 omap_writew(reg, UDC_TXDMA_CFG);
781 /* EMIFF or SDRC */
782 omap_set_dma_src_burst_mode(ep->lch,
783 OMAP_DMA_DATA_BURST_4);
784 omap_set_dma_src_data_pack(ep->lch, 1);
785 /* TIPB */
786 omap_set_dma_dest_params(ep->lch,
787 OMAP_DMA_PORT_TIPB,
788 OMAP_DMA_AMODE_CONSTANT,
789 UDC_DATA_DMA,
790 0, 0);
791 }
792 } else {
793 if (cpu_is_omap24xx())
794 dma_channel = OMAP24XX_DMA(USB_W2FC_RX0, channel);
795 else
796 dma_channel = OMAP_DMA_USB_W2FC_RX0 - 1 + channel;
797
798 status = omap_request_dma(dma_channel,
799 ep->ep.name, dma_error, ep, &ep->lch);
800 if (status == 0) {
801 omap_writew(reg, UDC_RXDMA_CFG);
802 /* TIPB */
803 omap_set_dma_src_params(ep->lch,
804 OMAP_DMA_PORT_TIPB,
805 OMAP_DMA_AMODE_CONSTANT,
806 UDC_DATA_DMA,
807 0, 0);
808 /* EMIFF or SDRC */
809 omap_set_dma_dest_burst_mode(ep->lch,
810 OMAP_DMA_DATA_BURST_4);
811 omap_set_dma_dest_data_pack(ep->lch, 1);
812 }
813 }
814 if (status)
815 ep->dma_channel = 0;
816 else {
817 ep->has_dma = 1;
818 omap_disable_dma_irq(ep->lch, OMAP_DMA_BLOCK_IRQ);
819
820 /* channel type P: hw synch (fifo) */
821 if (cpu_class_is_omap1() && !cpu_is_omap15xx())
822 omap_set_dma_channel_mode(ep->lch, OMAP_DMA_LCH_P);
823 }
824
825 just_restart:
826 /* restart any queue, even if the claim failed */
827 restart = !ep->stopped && !list_empty(&ep->queue);
828
829 if (status)
830 DBG("%s no dma channel: %d%s\n", ep->ep.name, status,
831 restart ? " (restart)" : "");
832 else
833 DBG("%s claimed %cxdma%d lch %d%s\n", ep->ep.name,
834 is_in ? 't' : 'r',
835 ep->dma_channel - 1, ep->lch,
836 restart ? " (restart)" : "");
837
838 if (restart) {
839 struct omap_req *req;
840 req = container_of(ep->queue.next, struct omap_req, queue);
841 if (ep->has_dma)
842 (is_in ? next_in_dma : next_out_dma)(ep, req);
843 else {
844 use_ep(ep, UDC_EP_SEL);
845 (is_in ? write_fifo : read_fifo)(ep, req);
846 deselect_ep();
847 if (!is_in) {
848 omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
849 ep->ackwait = 1 + ep->double_buf;
850 }
851 /* IN: 6 wait states before it'll tx */
852 }
853 }
854 }
855
856 static void dma_channel_release(struct omap_ep *ep)
857 {
858 int shift = 4 * (ep->dma_channel - 1);
859 u16 mask = 0x0f << shift;
860 struct omap_req *req;
861 int active;
862
863 /* abort any active usb transfer request */
864 if (!list_empty(&ep->queue))
865 req = container_of(ep->queue.next, struct omap_req, queue);
866 else
867 req = NULL;
868
869 active = omap_get_dma_active_status(ep->lch);
870
871 DBG("%s release %s %cxdma%d %p\n", ep->ep.name,
872 active ? "active" : "idle",
873 (ep->bEndpointAddress & USB_DIR_IN) ? 't' : 'r',
874 ep->dma_channel - 1, req);
875
876 /* NOTE: re-setting RX_REQ/TX_REQ because of a chip bug (before
877 * OMAP 1710 ES2.0) where reading the DMA_CFG can clear them.
878 */
879
880 /* wait till current packet DMA finishes, and fifo empties */
881 if (ep->bEndpointAddress & USB_DIR_IN) {
882 omap_writew((omap_readw(UDC_TXDMA_CFG) & ~mask) | UDC_DMA_REQ,
883 UDC_TXDMA_CFG);
884
885 if (req) {
886 finish_in_dma(ep, req, -ECONNRESET);
887
888 /* clear FIFO; hosts probably won't empty it */
889 use_ep(ep, UDC_EP_SEL);
890 omap_writew(UDC_CLR_EP, UDC_CTRL);
891 deselect_ep();
892 }
893 while (omap_readw(UDC_TXDMA_CFG) & mask)
894 udelay(10);
895 } else {
896 omap_writew((omap_readw(UDC_RXDMA_CFG) & ~mask) | UDC_DMA_REQ,
897 UDC_RXDMA_CFG);
898
899 /* dma empties the fifo */
900 while (omap_readw(UDC_RXDMA_CFG) & mask)
901 udelay(10);
902 if (req)
903 finish_out_dma(ep, req, -ECONNRESET, 0);
904 }
905 omap_free_dma(ep->lch);
906 ep->dma_channel = 0;
907 ep->lch = -1;
908 /* has_dma still set, till endpoint is fully quiesced */
909 }
910
911
912 /*-------------------------------------------------------------------------*/
913
914 static int
915 omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
916 {
917 struct omap_ep *ep = container_of(_ep, struct omap_ep, ep);
918 struct omap_req *req = container_of(_req, struct omap_req, req);
919 struct omap_udc *udc;
920 unsigned long flags;
921 int is_iso = 0;
922
923 /* catch various bogus parameters */
924 if (!_req || !req->req.complete || !req->req.buf
925 || !list_empty(&req->queue)) {
926 DBG("%s, bad params\n", __func__);
927 return -EINVAL;
928 }
929 if (!_ep || (!ep->desc && ep->bEndpointAddress)) {
930 DBG("%s, bad ep\n", __func__);
931 return -EINVAL;
932 }
933 if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
934 if (req->req.length > ep->ep.maxpacket)
935 return -EMSGSIZE;
936 is_iso = 1;
937 }
938
939 /* this isn't bogus, but OMAP DMA isn't the only hardware to
940 * have a hard time with partial packet reads... reject it.
941 * Except OMAP2 can handle the small packets.
942 */
943 if (use_dma
944 && ep->has_dma
945 && ep->bEndpointAddress != 0
946 && (ep->bEndpointAddress & USB_DIR_IN) == 0
947 && !cpu_class_is_omap2()
948 && (req->req.length % ep->ep.maxpacket) != 0) {
949 DBG("%s, no partial packet OUT reads\n", __func__);
950 return -EMSGSIZE;
951 }
952
953 udc = ep->udc;
954 if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
955 return -ESHUTDOWN;
956
957 if (use_dma && ep->has_dma) {
958 if (req->req.dma == DMA_ADDR_INVALID) {
959 req->req.dma = dma_map_single(
960 ep->udc->gadget.dev.parent,
961 req->req.buf,
962 req->req.length,
963 (ep->bEndpointAddress & USB_DIR_IN)
964 ? DMA_TO_DEVICE
965 : DMA_FROM_DEVICE);
966 req->mapped = 1;
967 } else {
968 dma_sync_single_for_device(
969 ep->udc->gadget.dev.parent,
970 req->req.dma, req->req.length,
971 (ep->bEndpointAddress & USB_DIR_IN)
972 ? DMA_TO_DEVICE
973 : DMA_FROM_DEVICE);
974 req->mapped = 0;
975 }
976 }
977
978 VDBG("%s queue req %p, len %d buf %p\n",
979 ep->ep.name, _req, _req->length, _req->buf);
980
981 spin_lock_irqsave(&udc->lock, flags);
982
983 req->req.status = -EINPROGRESS;
984 req->req.actual = 0;
985
986 /* maybe kickstart non-iso i/o queues */
987 if (is_iso) {
988 u16 w;
989
990 w = omap_readw(UDC_IRQ_EN);
991 w |= UDC_SOF_IE;
992 omap_writew(w, UDC_IRQ_EN);
993 } else if (list_empty(&ep->queue) && !ep->stopped && !ep->ackwait) {
994 int is_in;
995
996 if (ep->bEndpointAddress == 0) {
997 if (!udc->ep0_pending || !list_empty (&ep->queue)) {
998 spin_unlock_irqrestore(&udc->lock, flags);
999 return -EL2HLT;
1000 }
1001
1002 /* empty DATA stage? */
1003 is_in = udc->ep0_in;
1004 if (!req->req.length) {
1005
1006 /* chip became CONFIGURED or ADDRESSED
1007 * earlier; drivers may already have queued
1008 * requests to non-control endpoints
1009 */
1010 if (udc->ep0_set_config) {
1011 u16 irq_en = omap_readw(UDC_IRQ_EN);
1012
1013 irq_en |= UDC_DS_CHG_IE | UDC_EP0_IE;
1014 if (!udc->ep0_reset_config)
1015 irq_en |= UDC_EPN_RX_IE
1016 | UDC_EPN_TX_IE;
1017 omap_writew(irq_en, UDC_IRQ_EN);
1018 }
1019
1020 /* STATUS for zero length DATA stages is
1021 * always an IN ... even for IN transfers,
1022 * a weird case which seem to stall OMAP.
1023 */
1024 omap_writew(UDC_EP_SEL | UDC_EP_DIR, UDC_EP_NUM);
1025 omap_writew(UDC_CLR_EP, UDC_CTRL);
1026 omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
1027 omap_writew(UDC_EP_DIR, UDC_EP_NUM);
1028
1029 /* cleanup */
1030 udc->ep0_pending = 0;
1031 done(ep, req, 0);
1032 req = NULL;
1033
1034 /* non-empty DATA stage */
1035 } else if (is_in) {
1036 omap_writew(UDC_EP_SEL | UDC_EP_DIR, UDC_EP_NUM);
1037 } else {
1038 if (udc->ep0_setup)
1039 goto irq_wait;
1040 omap_writew(UDC_EP_SEL, UDC_EP_NUM);
1041 }
1042 } else {
1043 is_in = ep->bEndpointAddress & USB_DIR_IN;
1044 if (!ep->has_dma)
1045 use_ep(ep, UDC_EP_SEL);
1046 /* if ISO: SOF IRQs must be enabled/disabled! */
1047 }
1048
1049 if (ep->has_dma)
1050 (is_in ? next_in_dma : next_out_dma)(ep, req);
1051 else if (req) {
1052 if ((is_in ? write_fifo : read_fifo)(ep, req) == 1)
1053 req = NULL;
1054 deselect_ep();
1055 if (!is_in) {
1056 omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
1057 ep->ackwait = 1 + ep->double_buf;
1058 }
1059 /* IN: 6 wait states before it'll tx */
1060 }
1061 }
1062
1063 irq_wait:
1064 /* irq handler advances the queue */
1065 if (req != NULL)
1066 list_add_tail(&req->queue, &ep->queue);
1067 spin_unlock_irqrestore(&udc->lock, flags);
1068
1069 return 0;
1070 }
1071
1072 static int omap_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
1073 {
1074 struct omap_ep *ep = container_of(_ep, struct omap_ep, ep);
1075 struct omap_req *req;
1076 unsigned long flags;
1077
1078 if (!_ep || !_req)
1079 return -EINVAL;
1080
1081 spin_lock_irqsave(&ep->udc->lock, flags);
1082
1083 /* make sure it's actually queued on this endpoint */
1084 list_for_each_entry (req, &ep->queue, queue) {
1085 if (&req->req == _req)
1086 break;
1087 }
1088 if (&req->req != _req) {
1089 spin_unlock_irqrestore(&ep->udc->lock, flags);
1090 return -EINVAL;
1091 }
1092
1093 if (use_dma && ep->dma_channel && ep->queue.next == &req->queue) {
1094 int channel = ep->dma_channel;
1095
1096 /* releasing the channel cancels the request,
1097 * reclaiming the channel restarts the queue
1098 */
1099 dma_channel_release(ep);
1100 dma_channel_claim(ep, channel);
1101 } else
1102 done(ep, req, -ECONNRESET);
1103 spin_unlock_irqrestore(&ep->udc->lock, flags);
1104 return 0;
1105 }
1106
1107 /*-------------------------------------------------------------------------*/
1108
1109 static int omap_ep_set_halt(struct usb_ep *_ep, int value)
1110 {
1111 struct omap_ep *ep = container_of(_ep, struct omap_ep, ep);
1112 unsigned long flags;
1113 int status = -EOPNOTSUPP;
1114
1115 spin_lock_irqsave(&ep->udc->lock, flags);
1116
1117 /* just use protocol stalls for ep0; real halts are annoying */
1118 if (ep->bEndpointAddress == 0) {
1119 if (!ep->udc->ep0_pending)
1120 status = -EINVAL;
1121 else if (value) {
1122 if (ep->udc->ep0_set_config) {
1123 WARNING("error changing config?\n");
1124 omap_writew(UDC_CLR_CFG, UDC_SYSCON2);
1125 }
1126 omap_writew(UDC_STALL_CMD, UDC_SYSCON2);
1127 ep->udc->ep0_pending = 0;
1128 status = 0;
1129 } else /* NOP */
1130 status = 0;
1131
1132 /* otherwise, all active non-ISO endpoints can halt */
1133 } else if (ep->bmAttributes != USB_ENDPOINT_XFER_ISOC && ep->desc) {
1134
1135 /* IN endpoints must already be idle */
1136 if ((ep->bEndpointAddress & USB_DIR_IN)
1137 && !list_empty(&ep->queue)) {
1138 status = -EAGAIN;
1139 goto done;
1140 }
1141
1142 if (value) {
1143 int channel;
1144
1145 if (use_dma && ep->dma_channel
1146 && !list_empty(&ep->queue)) {
1147 channel = ep->dma_channel;
1148 dma_channel_release(ep);
1149 } else
1150 channel = 0;
1151
1152 use_ep(ep, UDC_EP_SEL);
1153 if (omap_readw(UDC_STAT_FLG) & UDC_NON_ISO_FIFO_EMPTY) {
1154 omap_writew(UDC_SET_HALT, UDC_CTRL);
1155 status = 0;
1156 } else
1157 status = -EAGAIN;
1158 deselect_ep();
1159
1160 if (channel)
1161 dma_channel_claim(ep, channel);
1162 } else {
1163 use_ep(ep, 0);
1164 omap_writew(ep->udc->clr_halt, UDC_CTRL);
1165 ep->ackwait = 0;
1166 if (!(ep->bEndpointAddress & USB_DIR_IN)) {
1167 omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
1168 ep->ackwait = 1 + ep->double_buf;
1169 }
1170 }
1171 }
1172 done:
1173 VDBG("%s %s halt stat %d\n", ep->ep.name,
1174 value ? "set" : "clear", status);
1175
1176 spin_unlock_irqrestore(&ep->udc->lock, flags);
1177 return status;
1178 }
1179
1180 static struct usb_ep_ops omap_ep_ops = {
1181 .enable = omap_ep_enable,
1182 .disable = omap_ep_disable,
1183
1184 .alloc_request = omap_alloc_request,
1185 .free_request = omap_free_request,
1186
1187 .queue = omap_ep_queue,
1188 .dequeue = omap_ep_dequeue,
1189
1190 .set_halt = omap_ep_set_halt,
1191 // fifo_status ... report bytes in fifo
1192 // fifo_flush ... flush fifo
1193 };
1194
1195 /*-------------------------------------------------------------------------*/
1196
1197 static int omap_get_frame(struct usb_gadget *gadget)
1198 {
1199 u16 sof = omap_readw(UDC_SOF);
1200 return (sof & UDC_TS_OK) ? (sof & UDC_TS) : -EL2NSYNC;
1201 }
1202
1203 static int omap_wakeup(struct usb_gadget *gadget)
1204 {
1205 struct omap_udc *udc;
1206 unsigned long flags;
1207 int retval = -EHOSTUNREACH;
1208
1209 udc = container_of(gadget, struct omap_udc, gadget);
1210
1211 spin_lock_irqsave(&udc->lock, flags);
1212 if (udc->devstat & UDC_SUS) {
1213 /* NOTE: OTG spec erratum says that OTG devices may
1214 * issue wakeups without host enable.
1215 */
1216 if (udc->devstat & (UDC_B_HNP_ENABLE|UDC_R_WK_OK)) {
1217 DBG("remote wakeup...\n");
1218 omap_writew(UDC_RMT_WKP, UDC_SYSCON2);
1219 retval = 0;
1220 }
1221
1222 /* NOTE: non-OTG systems may use SRP TOO... */
1223 } else if (!(udc->devstat & UDC_ATT)) {
1224 if (udc->transceiver)
1225 retval = otg_start_srp(udc->transceiver);
1226 }
1227 spin_unlock_irqrestore(&udc->lock, flags);
1228
1229 return retval;
1230 }
1231
1232 static int
1233 omap_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered)
1234 {
1235 struct omap_udc *udc;
1236 unsigned long flags;
1237 u16 syscon1;
1238
1239 udc = container_of(gadget, struct omap_udc, gadget);
1240 spin_lock_irqsave(&udc->lock, flags);
1241 syscon1 = omap_readw(UDC_SYSCON1);
1242 if (is_selfpowered)
1243 syscon1 |= UDC_SELF_PWR;
1244 else
1245 syscon1 &= ~UDC_SELF_PWR;
1246 omap_writew(syscon1, UDC_SYSCON1);
1247 spin_unlock_irqrestore(&udc->lock, flags);
1248
1249 return 0;
1250 }
1251
1252 static int can_pullup(struct omap_udc *udc)
1253 {
1254 return udc->driver && udc->softconnect && udc->vbus_active;
1255 }
1256
1257 static void pullup_enable(struct omap_udc *udc)
1258 {
1259 u16 w;
1260
1261 w = omap_readw(UDC_SYSCON1);
1262 w |= UDC_PULLUP_EN;
1263 omap_writew(w, UDC_SYSCON1);
1264 if (!gadget_is_otg(&udc->gadget) && !cpu_is_omap15xx()) {
1265 u32 l;
1266
1267 l = omap_readl(OTG_CTRL);
1268 l |= OTG_BSESSVLD;
1269 omap_writel(l, OTG_CTRL);
1270 }
1271 omap_writew(UDC_DS_CHG_IE, UDC_IRQ_EN);
1272 }
1273
1274 static void pullup_disable(struct omap_udc *udc)
1275 {
1276 u16 w;
1277
1278 if (!gadget_is_otg(&udc->gadget) && !cpu_is_omap15xx()) {
1279 u32 l;
1280
1281 l = omap_readl(OTG_CTRL);
1282 l &= ~OTG_BSESSVLD;
1283 omap_writel(l, OTG_CTRL);
1284 }
1285 omap_writew(UDC_DS_CHG_IE, UDC_IRQ_EN);
1286 w = omap_readw(UDC_SYSCON1);
1287 w &= ~UDC_PULLUP_EN;
1288 omap_writew(w, UDC_SYSCON1);
1289 }
1290
1291 static struct omap_udc *udc;
1292
1293 static void omap_udc_enable_clock(int enable)
1294 {
1295 if (udc == NULL || udc->dc_clk == NULL || udc->hhc_clk == NULL)
1296 return;
1297
1298 if (enable) {
1299 clk_enable(udc->dc_clk);
1300 clk_enable(udc->hhc_clk);
1301 udelay(100);
1302 } else {
1303 clk_disable(udc->hhc_clk);
1304 clk_disable(udc->dc_clk);
1305 }
1306 }
1307
1308 /*
1309 * Called by whatever detects VBUS sessions: external transceiver
1310 * driver, or maybe GPIO0 VBUS IRQ. May request 48 MHz clock.
1311 */
1312 static int omap_vbus_session(struct usb_gadget *gadget, int is_active)
1313 {
1314 struct omap_udc *udc;
1315 unsigned long flags;
1316 u32 l;
1317
1318 udc = container_of(gadget, struct omap_udc, gadget);
1319 spin_lock_irqsave(&udc->lock, flags);
1320 VDBG("VBUS %s\n", is_active ? "on" : "off");
1321 udc->vbus_active = (is_active != 0);
1322 if (cpu_is_omap15xx()) {
1323 /* "software" detect, ignored if !VBUS_MODE_1510 */
1324 l = omap_readl(FUNC_MUX_CTRL_0);
1325 if (is_active)
1326 l |= VBUS_CTRL_1510;
1327 else
1328 l &= ~VBUS_CTRL_1510;
1329 omap_writel(l, FUNC_MUX_CTRL_0);
1330 }
1331 if (udc->dc_clk != NULL && is_active) {
1332 if (!udc->clk_requested) {
1333 omap_udc_enable_clock(1);
1334 udc->clk_requested = 1;
1335 }
1336 }
1337 if (can_pullup(udc))
1338 pullup_enable(udc);
1339 else
1340 pullup_disable(udc);
1341 if (udc->dc_clk != NULL && !is_active) {
1342 if (udc->clk_requested) {
1343 omap_udc_enable_clock(0);
1344 udc->clk_requested = 0;
1345 }
1346 }
1347 spin_unlock_irqrestore(&udc->lock, flags);
1348 return 0;
1349 }
1350
1351 static int omap_vbus_draw(struct usb_gadget *gadget, unsigned mA)
1352 {
1353 struct omap_udc *udc;
1354
1355 udc = container_of(gadget, struct omap_udc, gadget);
1356 if (udc->transceiver)
1357 return otg_set_power(udc->transceiver, mA);
1358 return -EOPNOTSUPP;
1359 }
1360
1361 static int omap_pullup(struct usb_gadget *gadget, int is_on)
1362 {
1363 struct omap_udc *udc;
1364 unsigned long flags;
1365
1366 udc = container_of(gadget, struct omap_udc, gadget);
1367 spin_lock_irqsave(&udc->lock, flags);
1368 udc->softconnect = (is_on != 0);
1369 if (can_pullup(udc))
1370 pullup_enable(udc);
1371 else
1372 pullup_disable(udc);
1373 spin_unlock_irqrestore(&udc->lock, flags);
1374 return 0;
1375 }
1376
1377 static struct usb_gadget_ops omap_gadget_ops = {
1378 .get_frame = omap_get_frame,
1379 .wakeup = omap_wakeup,
1380 .set_selfpowered = omap_set_selfpowered,
1381 .vbus_session = omap_vbus_session,
1382 .vbus_draw = omap_vbus_draw,
1383 .pullup = omap_pullup,
1384 };
1385
1386 /*-------------------------------------------------------------------------*/
1387
1388 /* dequeue ALL requests; caller holds udc->lock */
1389 static void nuke(struct omap_ep *ep, int status)
1390 {
1391 struct omap_req *req;
1392
1393 ep->stopped = 1;
1394
1395 if (use_dma && ep->dma_channel)
1396 dma_channel_release(ep);
1397
1398 use_ep(ep, 0);
1399 omap_writew(UDC_CLR_EP, UDC_CTRL);
1400 if (ep->bEndpointAddress && ep->bmAttributes != USB_ENDPOINT_XFER_ISOC)
1401 omap_writew(UDC_SET_HALT, UDC_CTRL);
1402
1403 while (!list_empty(&ep->queue)) {
1404 req = list_entry(ep->queue.next, struct omap_req, queue);
1405 done(ep, req, status);
1406 }
1407 }
1408
1409 /* caller holds udc->lock */
1410 static void udc_quiesce(struct omap_udc *udc)
1411 {
1412 struct omap_ep *ep;
1413
1414 udc->gadget.speed = USB_SPEED_UNKNOWN;
1415 nuke(&udc->ep[0], -ESHUTDOWN);
1416 list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list)
1417 nuke(ep, -ESHUTDOWN);
1418 }
1419
1420 /*-------------------------------------------------------------------------*/
1421
1422 static void update_otg(struct omap_udc *udc)
1423 {
1424 u16 devstat;
1425
1426 if (!gadget_is_otg(&udc->gadget))
1427 return;
1428
1429 if (omap_readl(OTG_CTRL) & OTG_ID)
1430 devstat = omap_readw(UDC_DEVSTAT);
1431 else
1432 devstat = 0;
1433
1434 udc->gadget.b_hnp_enable = !!(devstat & UDC_B_HNP_ENABLE);
1435 udc->gadget.a_hnp_support = !!(devstat & UDC_A_HNP_SUPPORT);
1436 udc->gadget.a_alt_hnp_support = !!(devstat & UDC_A_ALT_HNP_SUPPORT);
1437
1438 /* Enable HNP early, avoiding races on suspend irq path.
1439 * ASSUMES OTG state machine B_BUS_REQ input is true.
1440 */
1441 if (udc->gadget.b_hnp_enable) {
1442 u32 l;
1443
1444 l = omap_readl(OTG_CTRL);
1445 l |= OTG_B_HNPEN | OTG_B_BUSREQ;
1446 l &= ~OTG_PULLUP;
1447 omap_writel(l, OTG_CTRL);
1448 }
1449 }
1450
1451 static void ep0_irq(struct omap_udc *udc, u16 irq_src)
1452 {
1453 struct omap_ep *ep0 = &udc->ep[0];
1454 struct omap_req *req = NULL;
1455
1456 ep0->irqs++;
1457
1458 /* Clear any pending requests and then scrub any rx/tx state
1459 * before starting to handle the SETUP request.
1460 */
1461 if (irq_src & UDC_SETUP) {
1462 u16 ack = irq_src & (UDC_EP0_TX|UDC_EP0_RX);
1463
1464 nuke(ep0, 0);
1465 if (ack) {
1466 omap_writew(ack, UDC_IRQ_SRC);
1467 irq_src = UDC_SETUP;
1468 }
1469 }
1470
1471 /* IN/OUT packets mean we're in the DATA or STATUS stage.
1472 * This driver uses only uses protocol stalls (ep0 never halts),
1473 * and if we got this far the gadget driver already had a
1474 * chance to stall. Tries to be forgiving of host oddities.
1475 *
1476 * NOTE: the last chance gadget drivers have to stall control
1477 * requests is during their request completion callback.
1478 */
1479 if (!list_empty(&ep0->queue))
1480 req = container_of(ep0->queue.next, struct omap_req, queue);
1481
1482 /* IN == TX to host */
1483 if (irq_src & UDC_EP0_TX) {
1484 int stat;
1485
1486 omap_writew(UDC_EP0_TX, UDC_IRQ_SRC);
1487 omap_writew(UDC_EP_SEL|UDC_EP_DIR, UDC_EP_NUM);
1488 stat = omap_readw(UDC_STAT_FLG);
1489 if (stat & UDC_ACK) {
1490 if (udc->ep0_in) {
1491 /* write next IN packet from response,
1492 * or set up the status stage.
1493 */
1494 if (req)
1495 stat = write_fifo(ep0, req);
1496 omap_writew(UDC_EP_DIR, UDC_EP_NUM);
1497 if (!req && udc->ep0_pending) {
1498 omap_writew(UDC_EP_SEL, UDC_EP_NUM);
1499 omap_writew(UDC_CLR_EP, UDC_CTRL);
1500 omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
1501 omap_writew(0, UDC_EP_NUM);
1502 udc->ep0_pending = 0;
1503 } /* else: 6 wait states before it'll tx */
1504 } else {
1505 /* ack status stage of OUT transfer */
1506 omap_writew(UDC_EP_DIR, UDC_EP_NUM);
1507 if (req)
1508 done(ep0, req, 0);
1509 }
1510 req = NULL;
1511 } else if (stat & UDC_STALL) {
1512 omap_writew(UDC_CLR_HALT, UDC_CTRL);
1513 omap_writew(UDC_EP_DIR, UDC_EP_NUM);
1514 } else {
1515 omap_writew(UDC_EP_DIR, UDC_EP_NUM);
1516 }
1517 }
1518
1519 /* OUT == RX from host */
1520 if (irq_src & UDC_EP0_RX) {
1521 int stat;
1522
1523 omap_writew(UDC_EP0_RX, UDC_IRQ_SRC);
1524 omap_writew(UDC_EP_SEL, UDC_EP_NUM);
1525 stat = omap_readw(UDC_STAT_FLG);
1526 if (stat & UDC_ACK) {
1527 if (!udc->ep0_in) {
1528 stat = 0;
1529 /* read next OUT packet of request, maybe
1530 * reactiviting the fifo; stall on errors.
1531 */
1532 if (!req || (stat = read_fifo(ep0, req)) < 0) {
1533 omap_writew(UDC_STALL_CMD, UDC_SYSCON2);
1534 udc->ep0_pending = 0;
1535 stat = 0;
1536 } else if (stat == 0)
1537 omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
1538 omap_writew(0, UDC_EP_NUM);
1539
1540 /* activate status stage */
1541 if (stat == 1) {
1542 done(ep0, req, 0);
1543 /* that may have STALLed ep0... */
1544 omap_writew(UDC_EP_SEL | UDC_EP_DIR,
1545 UDC_EP_NUM);
1546 omap_writew(UDC_CLR_EP, UDC_CTRL);
1547 omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
1548 omap_writew(UDC_EP_DIR, UDC_EP_NUM);
1549 udc->ep0_pending = 0;
1550 }
1551 } else {
1552 /* ack status stage of IN transfer */
1553 omap_writew(0, UDC_EP_NUM);
1554 if (req)
1555 done(ep0, req, 0);
1556 }
1557 } else if (stat & UDC_STALL) {
1558 omap_writew(UDC_CLR_HALT, UDC_CTRL);
1559 omap_writew(0, UDC_EP_NUM);
1560 } else {
1561 omap_writew(0, UDC_EP_NUM);
1562 }
1563 }
1564
1565 /* SETUP starts all control transfers */
1566 if (irq_src & UDC_SETUP) {
1567 union u {
1568 u16 word[4];
1569 struct usb_ctrlrequest r;
1570 } u;
1571 int status = -EINVAL;
1572 struct omap_ep *ep;
1573
1574 /* read the (latest) SETUP message */
1575 do {
1576 omap_writew(UDC_SETUP_SEL, UDC_EP_NUM);
1577 /* two bytes at a time */
1578 u.word[0] = omap_readw(UDC_DATA);
1579 u.word[1] = omap_readw(UDC_DATA);
1580 u.word[2] = omap_readw(UDC_DATA);
1581 u.word[3] = omap_readw(UDC_DATA);
1582 omap_writew(0, UDC_EP_NUM);
1583 } while (omap_readw(UDC_IRQ_SRC) & UDC_SETUP);
1584
1585 #define w_value le16_to_cpu(u.r.wValue)
1586 #define w_index le16_to_cpu(u.r.wIndex)
1587 #define w_length le16_to_cpu(u.r.wLength)
1588
1589 /* Delegate almost all control requests to the gadget driver,
1590 * except for a handful of ch9 status/feature requests that
1591 * hardware doesn't autodecode _and_ the gadget API hides.
1592 */
1593 udc->ep0_in = (u.r.bRequestType & USB_DIR_IN) != 0;
1594 udc->ep0_set_config = 0;
1595 udc->ep0_pending = 1;
1596 ep0->stopped = 0;
1597 ep0->ackwait = 0;
1598 switch (u.r.bRequest) {
1599 case USB_REQ_SET_CONFIGURATION:
1600 /* udc needs to know when ep != 0 is valid */
1601 if (u.r.bRequestType != USB_RECIP_DEVICE)
1602 goto delegate;
1603 if (w_length != 0)
1604 goto do_stall;
1605 udc->ep0_set_config = 1;
1606 udc->ep0_reset_config = (w_value == 0);
1607 VDBG("set config %d\n", w_value);
1608
1609 /* update udc NOW since gadget driver may start
1610 * queueing requests immediately; clear config
1611 * later if it fails the request.
1612 */
1613 if (udc->ep0_reset_config)
1614 omap_writew(UDC_CLR_CFG, UDC_SYSCON2);
1615 else
1616 omap_writew(UDC_DEV_CFG, UDC_SYSCON2);
1617 update_otg(udc);
1618 goto delegate;
1619 case USB_REQ_CLEAR_FEATURE:
1620 /* clear endpoint halt */
1621 if (u.r.bRequestType != USB_RECIP_ENDPOINT)
1622 goto delegate;
1623 if (w_value != USB_ENDPOINT_HALT
1624 || w_length != 0)
1625 goto do_stall;
1626 ep = &udc->ep[w_index & 0xf];
1627 if (ep != ep0) {
1628 if (w_index & USB_DIR_IN)
1629 ep += 16;
1630 if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
1631 || !ep->desc)
1632 goto do_stall;
1633 use_ep(ep, 0);
1634 omap_writew(udc->clr_halt, UDC_CTRL);
1635 ep->ackwait = 0;
1636 if (!(ep->bEndpointAddress & USB_DIR_IN)) {
1637 omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
1638 ep->ackwait = 1 + ep->double_buf;
1639 }
1640 /* NOTE: assumes the host behaves sanely,
1641 * only clearing real halts. Else we may
1642 * need to kill pending transfers and then
1643 * restart the queue... very messy for DMA!
1644 */
1645 }
1646 VDBG("%s halt cleared by host\n", ep->name);
1647 goto ep0out_status_stage;
1648 case USB_REQ_SET_FEATURE:
1649 /* set endpoint halt */
1650 if (u.r.bRequestType != USB_RECIP_ENDPOINT)
1651 goto delegate;
1652 if (w_value != USB_ENDPOINT_HALT
1653 || w_length != 0)
1654 goto do_stall;
1655 ep = &udc->ep[w_index & 0xf];
1656 if (w_index & USB_DIR_IN)
1657 ep += 16;
1658 if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
1659 || ep == ep0 || !ep->desc)
1660 goto do_stall;
1661 if (use_dma && ep->has_dma) {
1662 /* this has rude side-effects (aborts) and
1663 * can't really work if DMA-IN is active
1664 */
1665 DBG("%s host set_halt, NYET \n", ep->name);
1666 goto do_stall;
1667 }
1668 use_ep(ep, 0);
1669 /* can't halt if fifo isn't empty... */
1670 omap_writew(UDC_CLR_EP, UDC_CTRL);
1671 omap_writew(UDC_SET_HALT, UDC_CTRL);
1672 VDBG("%s halted by host\n", ep->name);
1673 ep0out_status_stage:
1674 status = 0;
1675 omap_writew(UDC_EP_SEL|UDC_EP_DIR, UDC_EP_NUM);
1676 omap_writew(UDC_CLR_EP, UDC_CTRL);
1677 omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
1678 omap_writew(UDC_EP_DIR, UDC_EP_NUM);
1679 udc->ep0_pending = 0;
1680 break;
1681 case USB_REQ_GET_STATUS:
1682 /* USB_ENDPOINT_HALT status? */
1683 if (u.r.bRequestType != (USB_DIR_IN|USB_RECIP_ENDPOINT))
1684 goto intf_status;
1685
1686 /* ep0 never stalls */
1687 if (!(w_index & 0xf))
1688 goto zero_status;
1689
1690 /* only active endpoints count */
1691 ep = &udc->ep[w_index & 0xf];
1692 if (w_index & USB_DIR_IN)
1693 ep += 16;
1694 if (!ep->desc)
1695 goto do_stall;
1696
1697 /* iso never stalls */
1698 if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
1699 goto zero_status;
1700
1701 /* FIXME don't assume non-halted endpoints!! */
1702 ERR("%s status, can't report\n", ep->ep.name);
1703 goto do_stall;
1704
1705 intf_status:
1706 /* return interface status. if we were pedantic,
1707 * we'd detect non-existent interfaces, and stall.
1708 */
1709 if (u.r.bRequestType
1710 != (USB_DIR_IN|USB_RECIP_INTERFACE))
1711 goto delegate;
1712
1713 zero_status:
1714 /* return two zero bytes */
1715 omap_writew(UDC_EP_SEL|UDC_EP_DIR, UDC_EP_NUM);
1716 omap_writew(0, UDC_DATA);
1717 omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
1718 omap_writew(UDC_EP_DIR, UDC_EP_NUM);
1719 status = 0;
1720 VDBG("GET_STATUS, interface %d\n", w_index);
1721 /* next, status stage */
1722 break;
1723 default:
1724 delegate:
1725 /* activate the ep0out fifo right away */
1726 if (!udc->ep0_in && w_length) {
1727 omap_writew(0, UDC_EP_NUM);
1728 omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
1729 }
1730
1731 /* gadget drivers see class/vendor specific requests,
1732 * {SET,GET}_{INTERFACE,DESCRIPTOR,CONFIGURATION},
1733 * and more
1734 */
1735 VDBG("SETUP %02x.%02x v%04x i%04x l%04x\n",
1736 u.r.bRequestType, u.r.bRequest,
1737 w_value, w_index, w_length);
1738
1739 #undef w_value
1740 #undef w_index
1741 #undef w_length
1742
1743 /* The gadget driver may return an error here,
1744 * causing an immediate protocol stall.
1745 *
1746 * Else it must issue a response, either queueing a
1747 * response buffer for the DATA stage, or halting ep0
1748 * (causing a protocol stall, not a real halt). A
1749 * zero length buffer means no DATA stage.
1750 *
1751 * It's fine to issue that response after the setup()
1752 * call returns, and this IRQ was handled.
1753 */
1754 udc->ep0_setup = 1;
1755 spin_unlock(&udc->lock);
1756 status = udc->driver->setup (&udc->gadget, &u.r);
1757 spin_lock(&udc->lock);
1758 udc->ep0_setup = 0;
1759 }
1760
1761 if (status < 0) {
1762 do_stall:
1763 VDBG("req %02x.%02x protocol STALL; stat %d\n",
1764 u.r.bRequestType, u.r.bRequest, status);
1765 if (udc->ep0_set_config) {
1766 if (udc->ep0_reset_config)
1767 WARNING("error resetting config?\n");
1768 else
1769 omap_writew(UDC_CLR_CFG, UDC_SYSCON2);
1770 }
1771 omap_writew(UDC_STALL_CMD, UDC_SYSCON2);
1772 udc->ep0_pending = 0;
1773 }
1774 }
1775 }
1776
1777 /*-------------------------------------------------------------------------*/
1778
1779 #define OTG_FLAGS (UDC_B_HNP_ENABLE|UDC_A_HNP_SUPPORT|UDC_A_ALT_HNP_SUPPORT)
1780
1781 static void devstate_irq(struct omap_udc *udc, u16 irq_src)
1782 {
1783 u16 devstat, change;
1784
1785 devstat = omap_readw(UDC_DEVSTAT);
1786 change = devstat ^ udc->devstat;
1787 udc->devstat = devstat;
1788
1789 if (change & (UDC_USB_RESET|UDC_ATT)) {
1790 udc_quiesce(udc);
1791
1792 if (change & UDC_ATT) {
1793 /* driver for any external transceiver will
1794 * have called omap_vbus_session() already
1795 */
1796 if (devstat & UDC_ATT) {
1797 udc->gadget.speed = USB_SPEED_FULL;
1798 VDBG("connect\n");
1799 if (!udc->transceiver)
1800 pullup_enable(udc);
1801 // if (driver->connect) call it
1802 } else if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
1803 udc->gadget.speed = USB_SPEED_UNKNOWN;
1804 if (!udc->transceiver)
1805 pullup_disable(udc);
1806 DBG("disconnect, gadget %s\n",
1807 udc->driver->driver.name);
1808 if (udc->driver->disconnect) {
1809 spin_unlock(&udc->lock);
1810 udc->driver->disconnect(&udc->gadget);
1811 spin_lock(&udc->lock);
1812 }
1813 }
1814 change &= ~UDC_ATT;
1815 }
1816
1817 if (change & UDC_USB_RESET) {
1818 if (devstat & UDC_USB_RESET) {
1819 VDBG("RESET=1\n");
1820 } else {
1821 udc->gadget.speed = USB_SPEED_FULL;
1822 INFO("USB reset done, gadget %s\n",
1823 udc->driver->driver.name);
1824 /* ep0 traffic is legal from now on */
1825 omap_writew(UDC_DS_CHG_IE | UDC_EP0_IE,
1826 UDC_IRQ_EN);
1827 }
1828 change &= ~UDC_USB_RESET;
1829 }
1830 }
1831 if (change & UDC_SUS) {
1832 if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
1833 // FIXME tell isp1301 to suspend/resume (?)
1834 if (devstat & UDC_SUS) {
1835 VDBG("suspend\n");
1836 update_otg(udc);
1837 /* HNP could be under way already */
1838 if (udc->gadget.speed == USB_SPEED_FULL
1839 && udc->driver->suspend) {
1840 spin_unlock(&udc->lock);
1841 udc->driver->suspend(&udc->gadget);
1842 spin_lock(&udc->lock);
1843 }
1844 if (udc->transceiver)
1845 otg_set_suspend(udc->transceiver, 1);
1846 } else {
1847 VDBG("resume\n");
1848 if (udc->transceiver)
1849 otg_set_suspend(udc->transceiver, 0);
1850 if (udc->gadget.speed == USB_SPEED_FULL
1851 && udc->driver->resume) {
1852 spin_unlock(&udc->lock);
1853 udc->driver->resume(&udc->gadget);
1854 spin_lock(&udc->lock);
1855 }
1856 }
1857 }
1858 change &= ~UDC_SUS;
1859 }
1860 if (!cpu_is_omap15xx() && (change & OTG_FLAGS)) {
1861 update_otg(udc);
1862 change &= ~OTG_FLAGS;
1863 }
1864
1865 change &= ~(UDC_CFG|UDC_DEF|UDC_ADD);
1866 if (change)
1867 VDBG("devstat %03x, ignore change %03x\n",
1868 devstat, change);
1869
1870 omap_writew(UDC_DS_CHG, UDC_IRQ_SRC);
1871 }
1872
1873 static irqreturn_t omap_udc_irq(int irq, void *_udc)
1874 {
1875 struct omap_udc *udc = _udc;
1876 u16 irq_src;
1877 irqreturn_t status = IRQ_NONE;
1878 unsigned long flags;
1879
1880 spin_lock_irqsave(&udc->lock, flags);
1881 irq_src = omap_readw(UDC_IRQ_SRC);
1882
1883 /* Device state change (usb ch9 stuff) */
1884 if (irq_src & UDC_DS_CHG) {
1885 devstate_irq(_udc, irq_src);
1886 status = IRQ_HANDLED;
1887 irq_src &= ~UDC_DS_CHG;
1888 }
1889
1890 /* EP0 control transfers */
1891 if (irq_src & (UDC_EP0_RX|UDC_SETUP|UDC_EP0_TX)) {
1892 ep0_irq(_udc, irq_src);
1893 status = IRQ_HANDLED;
1894 irq_src &= ~(UDC_EP0_RX|UDC_SETUP|UDC_EP0_TX);
1895 }
1896
1897 /* DMA transfer completion */
1898 if (use_dma && (irq_src & (UDC_TXN_DONE|UDC_RXN_CNT|UDC_RXN_EOT))) {
1899 dma_irq(_udc, irq_src);
1900 status = IRQ_HANDLED;
1901 irq_src &= ~(UDC_TXN_DONE|UDC_RXN_CNT|UDC_RXN_EOT);
1902 }
1903
1904 irq_src &= ~(UDC_IRQ_SOF | UDC_EPN_TX|UDC_EPN_RX);
1905 if (irq_src)
1906 DBG("udc_irq, unhandled %03x\n", irq_src);
1907 spin_unlock_irqrestore(&udc->lock, flags);
1908
1909 return status;
1910 }
1911
1912 /* workaround for seemingly-lost IRQs for RX ACKs... */
1913 #define PIO_OUT_TIMEOUT (jiffies + HZ/3)
1914 #define HALF_FULL(f) (!((f)&(UDC_NON_ISO_FIFO_FULL|UDC_NON_ISO_FIFO_EMPTY)))
1915
1916 static void pio_out_timer(unsigned long _ep)
1917 {
1918 struct omap_ep *ep = (void *) _ep;
1919 unsigned long flags;
1920 u16 stat_flg;
1921
1922 spin_lock_irqsave(&ep->udc->lock, flags);
1923 if (!list_empty(&ep->queue) && ep->ackwait) {
1924 use_ep(ep, UDC_EP_SEL);
1925 stat_flg = omap_readw(UDC_STAT_FLG);
1926
1927 if ((stat_flg & UDC_ACK) && (!(stat_flg & UDC_FIFO_EN)
1928 || (ep->double_buf && HALF_FULL(stat_flg)))) {
1929 struct omap_req *req;
1930
1931 VDBG("%s: lose, %04x\n", ep->ep.name, stat_flg);
1932 req = container_of(ep->queue.next,
1933 struct omap_req, queue);
1934 (void) read_fifo(ep, req);
1935 omap_writew(ep->bEndpointAddress, UDC_EP_NUM);
1936 omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
1937 ep->ackwait = 1 + ep->double_buf;
1938 } else
1939 deselect_ep();
1940 }
1941 mod_timer(&ep->timer, PIO_OUT_TIMEOUT);
1942 spin_unlock_irqrestore(&ep->udc->lock, flags);
1943 }
1944
1945 static irqreturn_t omap_udc_pio_irq(int irq, void *_dev)
1946 {
1947 u16 epn_stat, irq_src;
1948 irqreturn_t status = IRQ_NONE;
1949 struct omap_ep *ep;
1950 int epnum;
1951 struct omap_udc *udc = _dev;
1952 struct omap_req *req;
1953 unsigned long flags;
1954
1955 spin_lock_irqsave(&udc->lock, flags);
1956 epn_stat = omap_readw(UDC_EPN_STAT);
1957 irq_src = omap_readw(UDC_IRQ_SRC);
1958
1959 /* handle OUT first, to avoid some wasteful NAKs */
1960 if (irq_src & UDC_EPN_RX) {
1961 epnum = (epn_stat >> 8) & 0x0f;
1962 omap_writew(UDC_EPN_RX, UDC_IRQ_SRC);
1963 status = IRQ_HANDLED;
1964 ep = &udc->ep[epnum];
1965 ep->irqs++;
1966
1967 omap_writew(epnum | UDC_EP_SEL, UDC_EP_NUM);
1968 ep->fnf = 0;
1969 if (omap_readw(UDC_STAT_FLG) & UDC_ACK) {
1970 ep->ackwait--;
1971 if (!list_empty(&ep->queue)) {
1972 int stat;
1973 req = container_of(ep->queue.next,
1974 struct omap_req, queue);
1975 stat = read_fifo(ep, req);
1976 if (!ep->double_buf)
1977 ep->fnf = 1;
1978 }
1979 }
1980 /* min 6 clock delay before clearing EP_SEL ... */
1981 epn_stat = omap_readw(UDC_EPN_STAT);
1982 epn_stat = omap_readw(UDC_EPN_STAT);
1983 omap_writew(epnum, UDC_EP_NUM);
1984
1985 /* enabling fifo _after_ clearing ACK, contrary to docs,
1986 * reduces lossage; timer still needed though (sigh).
1987 */
1988 if (ep->fnf) {
1989 omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
1990 ep->ackwait = 1 + ep->double_buf;
1991 }
1992 mod_timer(&ep->timer, PIO_OUT_TIMEOUT);
1993 }
1994
1995 /* then IN transfers */
1996 else if (irq_src & UDC_EPN_TX) {
1997 epnum = epn_stat & 0x0f;
1998 omap_writew(UDC_EPN_TX, UDC_IRQ_SRC);
1999 status = IRQ_HANDLED;
2000 ep = &udc->ep[16 + epnum];
2001 ep->irqs++;
2002
2003 omap_writew(epnum | UDC_EP_DIR | UDC_EP_SEL, UDC_EP_NUM);
2004 if (omap_readw(UDC_STAT_FLG) & UDC_ACK) {
2005 ep->ackwait = 0;
2006 if (!list_empty(&ep->queue)) {
2007 req = container_of(ep->queue.next,
2008 struct omap_req, queue);
2009 (void) write_fifo(ep, req);
2010 }
2011 }
2012 /* min 6 clock delay before clearing EP_SEL ... */
2013 epn_stat = omap_readw(UDC_EPN_STAT);
2014 epn_stat = omap_readw(UDC_EPN_STAT);
2015 omap_writew(epnum | UDC_EP_DIR, UDC_EP_NUM);
2016 /* then 6 clocks before it'd tx */
2017 }
2018
2019 spin_unlock_irqrestore(&udc->lock, flags);
2020 return status;
2021 }
2022
2023 #ifdef USE_ISO
2024 static irqreturn_t omap_udc_iso_irq(int irq, void *_dev)
2025 {
2026 struct omap_udc *udc = _dev;
2027 struct omap_ep *ep;
2028 int pending = 0;
2029 unsigned long flags;
2030
2031 spin_lock_irqsave(&udc->lock, flags);
2032
2033 /* handle all non-DMA ISO transfers */
2034 list_for_each_entry (ep, &udc->iso, iso) {
2035 u16 stat;
2036 struct omap_req *req;
2037
2038 if (ep->has_dma || list_empty(&ep->queue))
2039 continue;
2040 req = list_entry(ep->queue.next, struct omap_req, queue);
2041
2042 use_ep(ep, UDC_EP_SEL);
2043 stat = omap_readw(UDC_STAT_FLG);
2044
2045 /* NOTE: like the other controller drivers, this isn't
2046 * currently reporting lost or damaged frames.
2047 */
2048 if (ep->bEndpointAddress & USB_DIR_IN) {
2049 if (stat & UDC_MISS_IN)
2050 /* done(ep, req, -EPROTO) */;
2051 else
2052 write_fifo(ep, req);
2053 } else {
2054 int status = 0;
2055
2056 if (stat & UDC_NO_RXPACKET)
2057 status = -EREMOTEIO;
2058 else if (stat & UDC_ISO_ERR)
2059 status = -EILSEQ;
2060 else if (stat & UDC_DATA_FLUSH)
2061 status = -ENOSR;
2062
2063 if (status)
2064 /* done(ep, req, status) */;
2065 else
2066 read_fifo(ep, req);
2067 }
2068 deselect_ep();
2069 /* 6 wait states before next EP */
2070
2071 ep->irqs++;
2072 if (!list_empty(&ep->queue))
2073 pending = 1;
2074 }
2075 if (!pending) {
2076 u16 w;
2077
2078 w = omap_readw(UDC_IRQ_EN);
2079 w &= ~UDC_SOF_IE;
2080 omap_writew(w, UDC_IRQ_EN);
2081 }
2082 omap_writew(UDC_IRQ_SOF, UDC_IRQ_SRC);
2083
2084 spin_unlock_irqrestore(&udc->lock, flags);
2085 return IRQ_HANDLED;
2086 }
2087 #endif
2088
2089 /*-------------------------------------------------------------------------*/
2090
2091 static inline int machine_without_vbus_sense(void)
2092 {
2093 return (machine_is_omap_innovator()
2094 || machine_is_omap_osk()
2095 || machine_is_omap_apollon()
2096 #ifndef CONFIG_MACH_OMAP_H4_OTG
2097 || machine_is_omap_h4()
2098 #endif
2099 || machine_is_sx1()
2100 || cpu_is_omap7xx() /* No known omap7xx boards with vbus sense */
2101 );
2102 }
2103
2104 int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
2105 int (*bind)(struct usb_gadget *))
2106 {
2107 int status = -ENODEV;
2108 struct omap_ep *ep;
2109 unsigned long flags;
2110
2111 /* basic sanity tests */
2112 if (!udc)
2113 return -ENODEV;
2114 if (!driver
2115 // FIXME if otg, check: driver->is_otg
2116 || driver->speed < USB_SPEED_FULL
2117 || !bind || !driver->setup)
2118 return -EINVAL;
2119
2120 spin_lock_irqsave(&udc->lock, flags);
2121 if (udc->driver) {
2122 spin_unlock_irqrestore(&udc->lock, flags);
2123 return -EBUSY;
2124 }
2125
2126 /* reset state */
2127 list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
2128 ep->irqs = 0;
2129 if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
2130 continue;
2131 use_ep(ep, 0);
2132 omap_writew(UDC_SET_HALT, UDC_CTRL);
2133 }
2134 udc->ep0_pending = 0;
2135 udc->ep[0].irqs = 0;
2136 udc->softconnect = 1;
2137
2138 /* hook up the driver */
2139 driver->driver.bus = NULL;
2140 udc->driver = driver;
2141 udc->gadget.dev.driver = &driver->driver;
2142 spin_unlock_irqrestore(&udc->lock, flags);
2143
2144 if (udc->dc_clk != NULL)
2145 omap_udc_enable_clock(1);
2146
2147 status = bind(&udc->gadget);
2148 if (status) {
2149 DBG("bind to %s --> %d\n", driver->driver.name, status);
2150 udc->gadget.dev.driver = NULL;
2151 udc->driver = NULL;
2152 goto done;
2153 }
2154 DBG("bound to driver %s\n", driver->driver.name);
2155
2156 omap_writew(UDC_IRQ_SRC_MASK, UDC_IRQ_SRC);
2157
2158 /* connect to bus through transceiver */
2159 if (udc->transceiver) {
2160 status = otg_set_peripheral(udc->transceiver, &udc->gadget);
2161 if (status < 0) {
2162 ERR("can't bind to transceiver\n");
2163 if (driver->unbind) {
2164 driver->unbind (&udc->gadget);
2165 udc->gadget.dev.driver = NULL;
2166 udc->driver = NULL;
2167 }
2168 goto done;
2169 }
2170 } else {
2171 if (can_pullup(udc))
2172 pullup_enable (udc);
2173 else
2174 pullup_disable (udc);
2175 }
2176
2177 /* boards that don't have VBUS sensing can't autogate 48MHz;
2178 * can't enter deep sleep while a gadget driver is active.
2179 */
2180 if (machine_without_vbus_sense())
2181 omap_vbus_session(&udc->gadget, 1);
2182
2183 done:
2184 if (udc->dc_clk != NULL)
2185 omap_udc_enable_clock(0);
2186 return status;
2187 }
2188 EXPORT_SYMBOL(usb_gadget_probe_driver);
2189
2190 int usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
2191 {
2192 unsigned long flags;
2193 int status = -ENODEV;
2194
2195 if (!udc)
2196 return -ENODEV;
2197 if (!driver || driver != udc->driver || !driver->unbind)
2198 return -EINVAL;
2199
2200 if (udc->dc_clk != NULL)
2201 omap_udc_enable_clock(1);
2202
2203 if (machine_without_vbus_sense())
2204 omap_vbus_session(&udc->gadget, 0);
2205
2206 if (udc->transceiver)
2207 (void) otg_set_peripheral(udc->transceiver, NULL);
2208 else
2209 pullup_disable(udc);
2210
2211 spin_lock_irqsave(&udc->lock, flags);
2212 udc_quiesce(udc);
2213 spin_unlock_irqrestore(&udc->lock, flags);
2214
2215 driver->unbind(&udc->gadget);
2216 udc->gadget.dev.driver = NULL;
2217 udc->driver = NULL;
2218
2219 if (udc->dc_clk != NULL)
2220 omap_udc_enable_clock(0);
2221 DBG("unregistered driver '%s'\n", driver->driver.name);
2222 return status;
2223 }
2224 EXPORT_SYMBOL(usb_gadget_unregister_driver);
2225
2226
2227 /*-------------------------------------------------------------------------*/
2228
2229 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
2230
2231 #include <linux/seq_file.h>
2232
2233 static const char proc_filename[] = "driver/udc";
2234
2235 #define FOURBITS "%s%s%s%s"
2236 #define EIGHTBITS FOURBITS FOURBITS
2237
2238 static void proc_ep_show(struct seq_file *s, struct omap_ep *ep)
2239 {
2240 u16 stat_flg;
2241 struct omap_req *req;
2242 char buf[20];
2243
2244 use_ep(ep, 0);
2245
2246 if (use_dma && ep->has_dma)
2247 snprintf(buf, sizeof buf, "(%cxdma%d lch%d) ",
2248 (ep->bEndpointAddress & USB_DIR_IN) ? 't' : 'r',
2249 ep->dma_channel - 1, ep->lch);
2250 else
2251 buf[0] = 0;
2252
2253 stat_flg = omap_readw(UDC_STAT_FLG);
2254 seq_printf(s,
2255 "\n%s %s%s%sirqs %ld stat %04x " EIGHTBITS FOURBITS "%s\n",
2256 ep->name, buf,
2257 ep->double_buf ? "dbuf " : "",
2258 ({char *s; switch(ep->ackwait){
2259 case 0: s = ""; break;
2260 case 1: s = "(ackw) "; break;
2261 case 2: s = "(ackw2) "; break;
2262 default: s = "(?) "; break;
2263 } s;}),
2264 ep->irqs, stat_flg,
2265 (stat_flg & UDC_NO_RXPACKET) ? "no_rxpacket " : "",
2266 (stat_flg & UDC_MISS_IN) ? "miss_in " : "",
2267 (stat_flg & UDC_DATA_FLUSH) ? "data_flush " : "",
2268 (stat_flg & UDC_ISO_ERR) ? "iso_err " : "",
2269 (stat_flg & UDC_ISO_FIFO_EMPTY) ? "iso_fifo_empty " : "",
2270 (stat_flg & UDC_ISO_FIFO_FULL) ? "iso_fifo_full " : "",
2271 (stat_flg & UDC_EP_HALTED) ? "HALT " : "",
2272 (stat_flg & UDC_STALL) ? "STALL " : "",
2273 (stat_flg & UDC_NAK) ? "NAK " : "",
2274 (stat_flg & UDC_ACK) ? "ACK " : "",
2275 (stat_flg & UDC_FIFO_EN) ? "fifo_en " : "",
2276 (stat_flg & UDC_NON_ISO_FIFO_EMPTY) ? "fifo_empty " : "",
2277 (stat_flg & UDC_NON_ISO_FIFO_FULL) ? "fifo_full " : "");
2278
2279 if (list_empty (&ep->queue))
2280 seq_printf(s, "\t(queue empty)\n");
2281 else
2282 list_for_each_entry (req, &ep->queue, queue) {
2283 unsigned length = req->req.actual;
2284
2285 if (use_dma && buf[0]) {
2286 length += ((ep->bEndpointAddress & USB_DIR_IN)
2287 ? dma_src_len : dma_dest_len)
2288 (ep, req->req.dma + length);
2289 buf[0] = 0;
2290 }
2291 seq_printf(s, "\treq %p len %d/%d buf %p\n",
2292 &req->req, length,
2293 req->req.length, req->req.buf);
2294 }
2295 }
2296
2297 static char *trx_mode(unsigned m, int enabled)
2298 {
2299 switch (m) {
2300 case 0: return enabled ? "*6wire" : "unused";
2301 case 1: return "4wire";
2302 case 2: return "3wire";
2303 case 3: return "6wire";
2304 default: return "unknown";
2305 }
2306 }
2307
2308 static int proc_otg_show(struct seq_file *s)
2309 {
2310 u32 tmp;
2311 u32 trans = 0;
2312 char *ctrl_name = "(UNKNOWN)";
2313
2314 /* XXX This needs major revision for OMAP2+ */
2315 tmp = omap_readl(OTG_REV);
2316 if (cpu_class_is_omap1()) {
2317 ctrl_name = "tranceiver_ctrl";
2318 trans = omap_readw(USB_TRANSCEIVER_CTRL);
2319 }
2320 seq_printf(s, "\nOTG rev %d.%d, %s %05x\n",
2321 tmp >> 4, tmp & 0xf, ctrl_name, trans);
2322 tmp = omap_readw(OTG_SYSCON_1);
2323 seq_printf(s, "otg_syscon1 %08x usb2 %s, usb1 %s, usb0 %s,"
2324 FOURBITS "\n", tmp,
2325 trx_mode(USB2_TRX_MODE(tmp), trans & CONF_USB2_UNI_R),
2326 trx_mode(USB1_TRX_MODE(tmp), trans & CONF_USB1_UNI_R),
2327 (USB0_TRX_MODE(tmp) == 0 && !cpu_is_omap1710())
2328 ? "internal"
2329 : trx_mode(USB0_TRX_MODE(tmp), 1),
2330 (tmp & OTG_IDLE_EN) ? " !otg" : "",
2331 (tmp & HST_IDLE_EN) ? " !host" : "",
2332 (tmp & DEV_IDLE_EN) ? " !dev" : "",
2333 (tmp & OTG_RESET_DONE) ? " reset_done" : " reset_active");
2334 tmp = omap_readl(OTG_SYSCON_2);
2335 seq_printf(s, "otg_syscon2 %08x%s" EIGHTBITS
2336 " b_ase_brst=%d hmc=%d\n", tmp,
2337 (tmp & OTG_EN) ? " otg_en" : "",
2338 (tmp & USBX_SYNCHRO) ? " synchro" : "",
2339 // much more SRP stuff
2340 (tmp & SRP_DATA) ? " srp_data" : "",
2341 (tmp & SRP_VBUS) ? " srp_vbus" : "",
2342 (tmp & OTG_PADEN) ? " otg_paden" : "",
2343 (tmp & HMC_PADEN) ? " hmc_paden" : "",
2344 (tmp & UHOST_EN) ? " uhost_en" : "",
2345 (tmp & HMC_TLLSPEED) ? " tllspeed" : "",
2346 (tmp & HMC_TLLATTACH) ? " tllattach" : "",
2347 B_ASE_BRST(tmp),
2348 OTG_HMC(tmp));
2349 tmp = omap_readl(OTG_CTRL);
2350 seq_printf(s, "otg_ctrl %06x" EIGHTBITS EIGHTBITS "%s\n", tmp,
2351 (tmp & OTG_ASESSVLD) ? " asess" : "",
2352 (tmp & OTG_BSESSEND) ? " bsess_end" : "",
2353 (tmp & OTG_BSESSVLD) ? " bsess" : "",
2354 (tmp & OTG_VBUSVLD) ? " vbus" : "",
2355 (tmp & OTG_ID) ? " id" : "",
2356 (tmp & OTG_DRIVER_SEL) ? " DEVICE" : " HOST",
2357 (tmp & OTG_A_SETB_HNPEN) ? " a_setb_hnpen" : "",
2358 (tmp & OTG_A_BUSREQ) ? " a_bus" : "",
2359 (tmp & OTG_B_HNPEN) ? " b_hnpen" : "",
2360 (tmp & OTG_B_BUSREQ) ? " b_bus" : "",
2361 (tmp & OTG_BUSDROP) ? " busdrop" : "",
2362 (tmp & OTG_PULLDOWN) ? " down" : "",
2363 (tmp & OTG_PULLUP) ? " up" : "",
2364 (tmp & OTG_DRV_VBUS) ? " drv" : "",
2365 (tmp & OTG_PD_VBUS) ? " pd_vb" : "",
2366 (tmp & OTG_PU_VBUS) ? " pu_vb" : "",
2367 (tmp & OTG_PU_ID) ? " pu_id" : ""
2368 );
2369 tmp = omap_readw(OTG_IRQ_EN);
2370 seq_printf(s, "otg_irq_en %04x" "\n", tmp);
2371 tmp = omap_readw(OTG_IRQ_SRC);
2372 seq_printf(s, "otg_irq_src %04x" "\n", tmp);
2373 tmp = omap_readw(OTG_OUTCTRL);
2374 seq_printf(s, "otg_outctrl %04x" "\n", tmp);
2375 tmp = omap_readw(OTG_TEST);
2376 seq_printf(s, "otg_test %04x" "\n", tmp);
2377 return 0;
2378 }
2379
2380 static int proc_udc_show(struct seq_file *s, void *_)
2381 {
2382 u32 tmp;
2383 struct omap_ep *ep;
2384 unsigned long flags;
2385
2386 spin_lock_irqsave(&udc->lock, flags);
2387
2388 seq_printf(s, "%s, version: " DRIVER_VERSION
2389 #ifdef USE_ISO
2390 " (iso)"
2391 #endif
2392 "%s\n",
2393 driver_desc,
2394 use_dma ? " (dma)" : "");
2395
2396 tmp = omap_readw(UDC_REV) & 0xff;
2397 seq_printf(s,
2398 "UDC rev %d.%d, fifo mode %d, gadget %s\n"
2399 "hmc %d, transceiver %s\n",
2400 tmp >> 4, tmp & 0xf,
2401 fifo_mode,
2402 udc->driver ? udc->driver->driver.name : "(none)",
2403 HMC,
2404 udc->transceiver
2405 ? udc->transceiver->label
2406 : ((cpu_is_omap1710() || cpu_is_omap24xx())
2407 ? "external" : "(none)"));
2408 if (cpu_class_is_omap1()) {
2409 seq_printf(s, "ULPD control %04x req %04x status %04x\n",
2410 omap_readw(ULPD_CLOCK_CTRL),
2411 omap_readw(ULPD_SOFT_REQ),
2412 omap_readw(ULPD_STATUS_REQ));
2413 }
2414
2415 /* OTG controller registers */
2416 if (!cpu_is_omap15xx())
2417 proc_otg_show(s);
2418
2419 tmp = omap_readw(UDC_SYSCON1);
2420 seq_printf(s, "\nsyscon1 %04x" EIGHTBITS "\n", tmp,
2421 (tmp & UDC_CFG_LOCK) ? " cfg_lock" : "",
2422 (tmp & UDC_DATA_ENDIAN) ? " data_endian" : "",
2423 (tmp & UDC_DMA_ENDIAN) ? " dma_endian" : "",
2424 (tmp & UDC_NAK_EN) ? " nak" : "",
2425 (tmp & UDC_AUTODECODE_DIS) ? " autodecode_dis" : "",
2426 (tmp & UDC_SELF_PWR) ? " self_pwr" : "",
2427 (tmp & UDC_SOFF_DIS) ? " soff_dis" : "",
2428 (tmp & UDC_PULLUP_EN) ? " PULLUP" : "");
2429 // syscon2 is write-only
2430
2431 /* UDC controller registers */
2432 if (!(tmp & UDC_PULLUP_EN)) {
2433 seq_printf(s, "(suspended)\n");
2434 spin_unlock_irqrestore(&udc->lock, flags);
2435 return 0;
2436 }
2437
2438 tmp = omap_readw(UDC_DEVSTAT);
2439 seq_printf(s, "devstat %04x" EIGHTBITS "%s%s\n", tmp,
2440 (tmp & UDC_B_HNP_ENABLE) ? " b_hnp" : "",
2441 (tmp & UDC_A_HNP_SUPPORT) ? " a_hnp" : "",
2442 (tmp & UDC_A_ALT_HNP_SUPPORT) ? " a_alt_hnp" : "",
2443 (tmp & UDC_R_WK_OK) ? " r_wk_ok" : "",
2444 (tmp & UDC_USB_RESET) ? " usb_reset" : "",
2445 (tmp & UDC_SUS) ? " SUS" : "",
2446 (tmp & UDC_CFG) ? " CFG" : "",
2447 (tmp & UDC_ADD) ? " ADD" : "",
2448 (tmp & UDC_DEF) ? " DEF" : "",
2449 (tmp & UDC_ATT) ? " ATT" : "");
2450 seq_printf(s, "sof %04x\n", omap_readw(UDC_SOF));
2451 tmp = omap_readw(UDC_IRQ_EN);
2452 seq_printf(s, "irq_en %04x" FOURBITS "%s\n", tmp,
2453 (tmp & UDC_SOF_IE) ? " sof" : "",
2454 (tmp & UDC_EPN_RX_IE) ? " epn_rx" : "",
2455 (tmp & UDC_EPN_TX_IE) ? " epn_tx" : "",
2456 (tmp & UDC_DS_CHG_IE) ? " ds_chg" : "",
2457 (tmp & UDC_EP0_IE) ? " ep0" : "");
2458 tmp = omap_readw(UDC_IRQ_SRC);
2459 seq_printf(s, "irq_src %04x" EIGHTBITS "%s%s\n", tmp,
2460 (tmp & UDC_TXN_DONE) ? " txn_done" : "",
2461 (tmp & UDC_RXN_CNT) ? " rxn_cnt" : "",
2462 (tmp & UDC_RXN_EOT) ? " rxn_eot" : "",
2463 (tmp & UDC_IRQ_SOF) ? " sof" : "",
2464 (tmp & UDC_EPN_RX) ? " epn_rx" : "",
2465 (tmp & UDC_EPN_TX) ? " epn_tx" : "",
2466 (tmp & UDC_DS_CHG) ? " ds_chg" : "",
2467 (tmp & UDC_SETUP) ? " setup" : "",
2468 (tmp & UDC_EP0_RX) ? " ep0out" : "",
2469 (tmp & UDC_EP0_TX) ? " ep0in" : "");
2470 if (use_dma) {
2471 unsigned i;
2472
2473 tmp = omap_readw(UDC_DMA_IRQ_EN);
2474 seq_printf(s, "dma_irq_en %04x%s" EIGHTBITS "\n", tmp,
2475 (tmp & UDC_TX_DONE_IE(3)) ? " tx2_done" : "",
2476 (tmp & UDC_RX_CNT_IE(3)) ? " rx2_cnt" : "",
2477 (tmp & UDC_RX_EOT_IE(3)) ? " rx2_eot" : "",
2478
2479 (tmp & UDC_TX_DONE_IE(2)) ? " tx1_done" : "",
2480 (tmp & UDC_RX_CNT_IE(2)) ? " rx1_cnt" : "",
2481 (tmp & UDC_RX_EOT_IE(2)) ? " rx1_eot" : "",
2482
2483 (tmp & UDC_TX_DONE_IE(1)) ? " tx0_done" : "",
2484 (tmp & UDC_RX_CNT_IE(1)) ? " rx0_cnt" : "",
2485 (tmp & UDC_RX_EOT_IE(1)) ? " rx0_eot" : "");
2486
2487 tmp = omap_readw(UDC_RXDMA_CFG);
2488 seq_printf(s, "rxdma_cfg %04x\n", tmp);
2489 if (tmp) {
2490 for (i = 0; i < 3; i++) {
2491 if ((tmp & (0x0f << (i * 4))) == 0)
2492 continue;
2493 seq_printf(s, "rxdma[%d] %04x\n", i,
2494 omap_readw(UDC_RXDMA(i + 1)));
2495 }
2496 }
2497 tmp = omap_readw(UDC_TXDMA_CFG);
2498 seq_printf(s, "txdma_cfg %04x\n", tmp);
2499 if (tmp) {
2500 for (i = 0; i < 3; i++) {
2501 if (!(tmp & (0x0f << (i * 4))))
2502 continue;
2503 seq_printf(s, "txdma[%d] %04x\n", i,
2504 omap_readw(UDC_TXDMA(i + 1)));
2505 }
2506 }
2507 }
2508
2509 tmp = omap_readw(UDC_DEVSTAT);
2510 if (tmp & UDC_ATT) {
2511 proc_ep_show(s, &udc->ep[0]);
2512 if (tmp & UDC_ADD) {
2513 list_for_each_entry (ep, &udc->gadget.ep_list,
2514 ep.ep_list) {
2515 if (ep->desc)
2516 proc_ep_show(s, ep);
2517 }
2518 }
2519 }
2520 spin_unlock_irqrestore(&udc->lock, flags);
2521 return 0;
2522 }
2523
2524 static int proc_udc_open(struct inode *inode, struct file *file)
2525 {
2526 return single_open(file, proc_udc_show, NULL);
2527 }
2528
2529 static const struct file_operations proc_ops = {
2530 .owner = THIS_MODULE,
2531 .open = proc_udc_open,
2532 .read = seq_read,
2533 .llseek = seq_lseek,
2534 .release = single_release,
2535 };
2536
2537 static void create_proc_file(void)
2538 {
2539 proc_create(proc_filename, 0, NULL, &proc_ops);
2540 }
2541
2542 static void remove_proc_file(void)
2543 {
2544 remove_proc_entry(proc_filename, NULL);
2545 }
2546
2547 #else
2548
2549 static inline void create_proc_file(void) {}
2550 static inline void remove_proc_file(void) {}
2551
2552 #endif
2553
2554 /*-------------------------------------------------------------------------*/
2555
2556 /* Before this controller can enumerate, we need to pick an endpoint
2557 * configuration, or "fifo_mode" That involves allocating 2KB of packet
2558 * buffer space among the endpoints we'll be operating.
2559 *
2560 * NOTE: as of OMAP 1710 ES2.0, writing a new endpoint config when
2561 * UDC_SYSCON_1.CFG_LOCK is set can now work. We won't use that
2562 * capability yet though.
2563 */
2564 static unsigned __init
2565 omap_ep_setup(char *name, u8 addr, u8 type,
2566 unsigned buf, unsigned maxp, int dbuf)
2567 {
2568 struct omap_ep *ep;
2569 u16 epn_rxtx = 0;
2570
2571 /* OUT endpoints first, then IN */
2572 ep = &udc->ep[addr & 0xf];
2573 if (addr & USB_DIR_IN)
2574 ep += 16;
2575
2576 /* in case of ep init table bugs */
2577 BUG_ON(ep->name[0]);
2578
2579 /* chip setup ... bit values are same for IN, OUT */
2580 if (type == USB_ENDPOINT_XFER_ISOC) {
2581 switch (maxp) {
2582 case 8: epn_rxtx = 0 << 12; break;
2583 case 16: epn_rxtx = 1 << 12; break;
2584 case 32: epn_rxtx = 2 << 12; break;
2585 case 64: epn_rxtx = 3 << 12; break;
2586 case 128: epn_rxtx = 4 << 12; break;
2587 case 256: epn_rxtx = 5 << 12; break;
2588 case 512: epn_rxtx = 6 << 12; break;
2589 default: BUG();
2590 }
2591 epn_rxtx |= UDC_EPN_RX_ISO;
2592 dbuf = 1;
2593 } else {
2594 /* double-buffering "not supported" on 15xx,
2595 * and ignored for PIO-IN on newer chips
2596 * (for more reliable behavior)
2597 */
2598 if (!use_dma || cpu_is_omap15xx() || cpu_is_omap24xx())
2599 dbuf = 0;
2600
2601 switch (maxp) {
2602 case 8: epn_rxtx = 0 << 12; break;
2603 case 16: epn_rxtx = 1 << 12; break;
2604 case 32: epn_rxtx = 2 << 12; break;
2605 case 64: epn_rxtx = 3 << 12; break;
2606 default: BUG();
2607 }
2608 if (dbuf && addr)
2609 epn_rxtx |= UDC_EPN_RX_DB;
2610 init_timer(&ep->timer);
2611 ep->timer.function = pio_out_timer;
2612 ep->timer.data = (unsigned long) ep;
2613 }
2614 if (addr)
2615 epn_rxtx |= UDC_EPN_RX_VALID;
2616 BUG_ON(buf & 0x07);
2617 epn_rxtx |= buf >> 3;
2618
2619 DBG("%s addr %02x rxtx %04x maxp %d%s buf %d\n",
2620 name, addr, epn_rxtx, maxp, dbuf ? "x2" : "", buf);
2621
2622 if (addr & USB_DIR_IN)
2623 omap_writew(epn_rxtx, UDC_EP_TX(addr & 0xf));
2624 else
2625 omap_writew(epn_rxtx, UDC_EP_RX(addr));
2626
2627 /* next endpoint's buffer starts after this one's */
2628 buf += maxp;
2629 if (dbuf)
2630 buf += maxp;
2631 BUG_ON(buf > 2048);
2632
2633 /* set up driver data structures */
2634 BUG_ON(strlen(name) >= sizeof ep->name);
2635 strlcpy(ep->name, name, sizeof ep->name);
2636 INIT_LIST_HEAD(&ep->queue);
2637 INIT_LIST_HEAD(&ep->iso);
2638 ep->bEndpointAddress = addr;
2639 ep->bmAttributes = type;
2640 ep->double_buf = dbuf;
2641 ep->udc = udc;
2642
2643 ep->ep.name = ep->name;
2644 ep->ep.ops = &omap_ep_ops;
2645 ep->ep.maxpacket = ep->maxpacket = maxp;
2646 list_add_tail (&ep->ep.ep_list, &udc->gadget.ep_list);
2647
2648 return buf;
2649 }
2650
2651 static void omap_udc_release(struct device *dev)
2652 {
2653 complete(udc->done);
2654 kfree (udc);
2655 udc = NULL;
2656 }
2657
2658 static int __init
2659 omap_udc_setup(struct platform_device *odev, struct otg_transceiver *xceiv)
2660 {
2661 unsigned tmp, buf;
2662
2663 /* abolish any previous hardware state */
2664 omap_writew(0, UDC_SYSCON1);
2665 omap_writew(0, UDC_IRQ_EN);
2666 omap_writew(UDC_IRQ_SRC_MASK, UDC_IRQ_SRC);
2667 omap_writew(0, UDC_DMA_IRQ_EN);
2668 omap_writew(0, UDC_RXDMA_CFG);
2669 omap_writew(0, UDC_TXDMA_CFG);
2670
2671 /* UDC_PULLUP_EN gates the chip clock */
2672 // OTG_SYSCON_1 |= DEV_IDLE_EN;
2673
2674 udc = kzalloc(sizeof(*udc), GFP_KERNEL);
2675 if (!udc)
2676 return -ENOMEM;
2677
2678 spin_lock_init (&udc->lock);
2679
2680 udc->gadget.ops = &omap_gadget_ops;
2681 udc->gadget.ep0 = &udc->ep[0].ep;
2682 INIT_LIST_HEAD(&udc->gadget.ep_list);
2683 INIT_LIST_HEAD(&udc->iso);
2684 udc->gadget.speed = USB_SPEED_UNKNOWN;
2685 udc->gadget.name = driver_name;
2686
2687 device_initialize(&udc->gadget.dev);
2688 dev_set_name(&udc->gadget.dev, "gadget");
2689 udc->gadget.dev.release = omap_udc_release;
2690 udc->gadget.dev.parent = &odev->dev;
2691 if (use_dma)
2692 udc->gadget.dev.dma_mask = odev->dev.dma_mask;
2693
2694 udc->transceiver = xceiv;
2695
2696 /* ep0 is special; put it right after the SETUP buffer */
2697 buf = omap_ep_setup("ep0", 0, USB_ENDPOINT_XFER_CONTROL,
2698 8 /* after SETUP */, 64 /* maxpacket */, 0);
2699 list_del_init(&udc->ep[0].ep.ep_list);
2700
2701 /* initially disable all non-ep0 endpoints */
2702 for (tmp = 1; tmp < 15; tmp++) {
2703 omap_writew(0, UDC_EP_RX(tmp));
2704 omap_writew(0, UDC_EP_TX(tmp));
2705 }
2706
2707 #define OMAP_BULK_EP(name,addr) \
2708 buf = omap_ep_setup(name "-bulk", addr, \
2709 USB_ENDPOINT_XFER_BULK, buf, 64, 1);
2710 #define OMAP_INT_EP(name,addr, maxp) \
2711 buf = omap_ep_setup(name "-int", addr, \
2712 USB_ENDPOINT_XFER_INT, buf, maxp, 0);
2713 #define OMAP_ISO_EP(name,addr, maxp) \
2714 buf = omap_ep_setup(name "-iso", addr, \
2715 USB_ENDPOINT_XFER_ISOC, buf, maxp, 1);
2716
2717 switch (fifo_mode) {
2718 case 0:
2719 OMAP_BULK_EP("ep1in", USB_DIR_IN | 1);
2720 OMAP_BULK_EP("ep2out", USB_DIR_OUT | 2);
2721 OMAP_INT_EP("ep3in", USB_DIR_IN | 3, 16);
2722 break;
2723 case 1:
2724 OMAP_BULK_EP("ep1in", USB_DIR_IN | 1);
2725 OMAP_BULK_EP("ep2out", USB_DIR_OUT | 2);
2726 OMAP_INT_EP("ep9in", USB_DIR_IN | 9, 16);
2727
2728 OMAP_BULK_EP("ep3in", USB_DIR_IN | 3);
2729 OMAP_BULK_EP("ep4out", USB_DIR_OUT | 4);
2730 OMAP_INT_EP("ep10in", USB_DIR_IN | 10, 16);
2731
2732 OMAP_BULK_EP("ep5in", USB_DIR_IN | 5);
2733 OMAP_BULK_EP("ep5out", USB_DIR_OUT | 5);
2734 OMAP_INT_EP("ep11in", USB_DIR_IN | 11, 16);
2735
2736 OMAP_BULK_EP("ep6in", USB_DIR_IN | 6);
2737 OMAP_BULK_EP("ep6out", USB_DIR_OUT | 6);
2738 OMAP_INT_EP("ep12in", USB_DIR_IN | 12, 16);
2739
2740 OMAP_BULK_EP("ep7in", USB_DIR_IN | 7);
2741 OMAP_BULK_EP("ep7out", USB_DIR_OUT | 7);
2742 OMAP_INT_EP("ep13in", USB_DIR_IN | 13, 16);
2743 OMAP_INT_EP("ep13out", USB_DIR_OUT | 13, 16);
2744
2745 OMAP_BULK_EP("ep8in", USB_DIR_IN | 8);
2746 OMAP_BULK_EP("ep8out", USB_DIR_OUT | 8);
2747 OMAP_INT_EP("ep14in", USB_DIR_IN | 14, 16);
2748 OMAP_INT_EP("ep14out", USB_DIR_OUT | 14, 16);
2749
2750 OMAP_BULK_EP("ep15in", USB_DIR_IN | 15);
2751 OMAP_BULK_EP("ep15out", USB_DIR_OUT | 15);
2752
2753 break;
2754
2755 #ifdef USE_ISO
2756 case 2: /* mixed iso/bulk */
2757 OMAP_ISO_EP("ep1in", USB_DIR_IN | 1, 256);
2758 OMAP_ISO_EP("ep2out", USB_DIR_OUT | 2, 256);
2759 OMAP_ISO_EP("ep3in", USB_DIR_IN | 3, 128);
2760 OMAP_ISO_EP("ep4out", USB_DIR_OUT | 4, 128);
2761
2762 OMAP_INT_EP("ep5in", USB_DIR_IN | 5, 16);
2763
2764 OMAP_BULK_EP("ep6in", USB_DIR_IN | 6);
2765 OMAP_BULK_EP("ep7out", USB_DIR_OUT | 7);
2766 OMAP_INT_EP("ep8in", USB_DIR_IN | 8, 16);
2767 break;
2768 case 3: /* mixed bulk/iso */
2769 OMAP_BULK_EP("ep1in", USB_DIR_IN | 1);
2770 OMAP_BULK_EP("ep2out", USB_DIR_OUT | 2);
2771 OMAP_INT_EP("ep3in", USB_DIR_IN | 3, 16);
2772
2773 OMAP_BULK_EP("ep4in", USB_DIR_IN | 4);
2774 OMAP_BULK_EP("ep5out", USB_DIR_OUT | 5);
2775 OMAP_INT_EP("ep6in", USB_DIR_IN | 6, 16);
2776
2777 OMAP_ISO_EP("ep7in", USB_DIR_IN | 7, 256);
2778 OMAP_ISO_EP("ep8out", USB_DIR_OUT | 8, 256);
2779 OMAP_INT_EP("ep9in", USB_DIR_IN | 9, 16);
2780 break;
2781 #endif
2782
2783 /* add more modes as needed */
2784
2785 default:
2786 ERR("unsupported fifo_mode #%d\n", fifo_mode);
2787 return -ENODEV;
2788 }
2789 omap_writew(UDC_CFG_LOCK|UDC_SELF_PWR, UDC_SYSCON1);
2790 INFO("fifo mode %d, %d bytes not used\n", fifo_mode, 2048 - buf);
2791 return 0;
2792 }
2793
2794 static int __init omap_udc_probe(struct platform_device *pdev)
2795 {
2796 int status = -ENODEV;
2797 int hmc;
2798 struct otg_transceiver *xceiv = NULL;
2799 const char *type = NULL;
2800 struct omap_usb_config *config = pdev->dev.platform_data;
2801 struct clk *dc_clk;
2802 struct clk *hhc_clk;
2803
2804 /* NOTE: "knows" the order of the resources! */
2805 if (!request_mem_region(pdev->resource[0].start,
2806 pdev->resource[0].end - pdev->resource[0].start + 1,
2807 driver_name)) {
2808 DBG("request_mem_region failed\n");
2809 return -EBUSY;
2810 }
2811
2812 if (cpu_is_omap16xx()) {
2813 dc_clk = clk_get(&pdev->dev, "usb_dc_ck");
2814 hhc_clk = clk_get(&pdev->dev, "usb_hhc_ck");
2815 BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk));
2816 /* can't use omap_udc_enable_clock yet */
2817 clk_enable(dc_clk);
2818 clk_enable(hhc_clk);
2819 udelay(100);
2820 }
2821
2822 if (cpu_is_omap24xx()) {
2823 dc_clk = clk_get(&pdev->dev, "usb_fck");
2824 hhc_clk = clk_get(&pdev->dev, "usb_l4_ick");
2825 BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk));
2826 /* can't use omap_udc_enable_clock yet */
2827 clk_enable(dc_clk);
2828 clk_enable(hhc_clk);
2829 udelay(100);
2830 }
2831
2832 if (cpu_is_omap7xx()) {
2833 dc_clk = clk_get(&pdev->dev, "usb_dc_ck");
2834 hhc_clk = clk_get(&pdev->dev, "l3_ocpi_ck");
2835 BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk));
2836 /* can't use omap_udc_enable_clock yet */
2837 clk_enable(dc_clk);
2838 clk_enable(hhc_clk);
2839 udelay(100);
2840 }
2841
2842 INFO("OMAP UDC rev %d.%d%s\n",
2843 omap_readw(UDC_REV) >> 4, omap_readw(UDC_REV) & 0xf,
2844 config->otg ? ", Mini-AB" : "");
2845
2846 /* use the mode given to us by board init code */
2847 if (cpu_is_omap15xx()) {
2848 hmc = HMC_1510;
2849 type = "(unknown)";
2850
2851 if (machine_without_vbus_sense()) {
2852 /* just set up software VBUS detect, and then
2853 * later rig it so we always report VBUS.
2854 * FIXME without really sensing VBUS, we can't
2855 * know when to turn PULLUP_EN on/off; and that
2856 * means we always "need" the 48MHz clock.
2857 */
2858 u32 tmp = omap_readl(FUNC_MUX_CTRL_0);
2859 tmp &= ~VBUS_CTRL_1510;
2860 omap_writel(tmp, FUNC_MUX_CTRL_0);
2861 tmp |= VBUS_MODE_1510;
2862 tmp &= ~VBUS_CTRL_1510;
2863 omap_writel(tmp, FUNC_MUX_CTRL_0);
2864 }
2865 } else {
2866 /* The transceiver may package some GPIO logic or handle
2867 * loopback and/or transceiverless setup; if we find one,
2868 * use it. Except for OTG, we don't _need_ to talk to one;
2869 * but not having one probably means no VBUS detection.
2870 */
2871 xceiv = otg_get_transceiver();
2872 if (xceiv)
2873 type = xceiv->label;
2874 else if (config->otg) {
2875 DBG("OTG requires external transceiver!\n");
2876 goto cleanup0;
2877 }
2878
2879 hmc = HMC_1610;
2880
2881 if (cpu_is_omap24xx()) {
2882 /* this could be transceiverless in one of the
2883 * "we don't need to know" modes.
2884 */
2885 type = "external";
2886 goto known;
2887 }
2888
2889 switch (hmc) {
2890 case 0: /* POWERUP DEFAULT == 0 */
2891 case 4:
2892 case 12:
2893 case 20:
2894 if (!cpu_is_omap1710()) {
2895 type = "integrated";
2896 break;
2897 }
2898 /* FALL THROUGH */
2899 case 3:
2900 case 11:
2901 case 16:
2902 case 19:
2903 case 25:
2904 if (!xceiv) {
2905 DBG("external transceiver not registered!\n");
2906 type = "unknown";
2907 }
2908 break;
2909 case 21: /* internal loopback */
2910 type = "loopback";
2911 break;
2912 case 14: /* transceiverless */
2913 if (cpu_is_omap1710())
2914 goto bad_on_1710;
2915 /* FALL THROUGH */
2916 case 13:
2917 case 15:
2918 type = "no";
2919 break;
2920
2921 default:
2922 bad_on_1710:
2923 ERR("unrecognized UDC HMC mode %d\n", hmc);
2924 goto cleanup0;
2925 }
2926 }
2927 known:
2928 INFO("hmc mode %d, %s transceiver\n", hmc, type);
2929
2930 /* a "gadget" abstracts/virtualizes the controller */
2931 status = omap_udc_setup(pdev, xceiv);
2932 if (status) {
2933 goto cleanup0;
2934 }
2935 xceiv = NULL;
2936 // "udc" is now valid
2937 pullup_disable(udc);
2938 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
2939 udc->gadget.is_otg = (config->otg != 0);
2940 #endif
2941
2942 /* starting with omap1710 es2.0, clear toggle is a separate bit */
2943 if (omap_readw(UDC_REV) >= 0x61)
2944 udc->clr_halt = UDC_RESET_EP | UDC_CLRDATA_TOGGLE;
2945 else
2946 udc->clr_halt = UDC_RESET_EP;
2947
2948 /* USB general purpose IRQ: ep0, state changes, dma, etc */
2949 status = request_irq(pdev->resource[1].start, omap_udc_irq,
2950 IRQF_SAMPLE_RANDOM, driver_name, udc);
2951 if (status != 0) {
2952 ERR("can't get irq %d, err %d\n",
2953 (int) pdev->resource[1].start, status);
2954 goto cleanup1;
2955 }
2956
2957 /* USB "non-iso" IRQ (PIO for all but ep0) */
2958 status = request_irq(pdev->resource[2].start, omap_udc_pio_irq,
2959 IRQF_SAMPLE_RANDOM, "omap_udc pio", udc);
2960 if (status != 0) {
2961 ERR("can't get irq %d, err %d\n",
2962 (int) pdev->resource[2].start, status);
2963 goto cleanup2;
2964 }
2965 #ifdef USE_ISO
2966 status = request_irq(pdev->resource[3].start, omap_udc_iso_irq,
2967 IRQF_DISABLED, "omap_udc iso", udc);
2968 if (status != 0) {
2969 ERR("can't get irq %d, err %d\n",
2970 (int) pdev->resource[3].start, status);
2971 goto cleanup3;
2972 }
2973 #endif
2974 if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
2975 udc->dc_clk = dc_clk;
2976 udc->hhc_clk = hhc_clk;
2977 clk_disable(hhc_clk);
2978 clk_disable(dc_clk);
2979 }
2980
2981 if (cpu_is_omap24xx()) {
2982 udc->dc_clk = dc_clk;
2983 udc->hhc_clk = hhc_clk;
2984 /* FIXME OMAP2 don't release hhc & dc clock */
2985 #if 0
2986 clk_disable(hhc_clk);
2987 clk_disable(dc_clk);
2988 #endif
2989 }
2990
2991 create_proc_file();
2992 status = device_add(&udc->gadget.dev);
2993 if (!status)
2994 return status;
2995 /* If fail, fall through */
2996 #ifdef USE_ISO
2997 cleanup3:
2998 free_irq(pdev->resource[2].start, udc);
2999 #endif
3000
3001 cleanup2:
3002 free_irq(pdev->resource[1].start, udc);
3003
3004 cleanup1:
3005 kfree (udc);
3006 udc = NULL;
3007
3008 cleanup0:
3009 if (xceiv)
3010 otg_put_transceiver(xceiv);
3011
3012 if (cpu_is_omap16xx() || cpu_is_omap24xx() || cpu_is_omap7xx()) {
3013 clk_disable(hhc_clk);
3014 clk_disable(dc_clk);
3015 clk_put(hhc_clk);
3016 clk_put(dc_clk);
3017 }
3018
3019 release_mem_region(pdev->resource[0].start,
3020 pdev->resource[0].end - pdev->resource[0].start + 1);
3021
3022 return status;
3023 }
3024
3025 static int __exit omap_udc_remove(struct platform_device *pdev)
3026 {
3027 DECLARE_COMPLETION_ONSTACK(done);
3028
3029 if (!udc)
3030 return -ENODEV;
3031 if (udc->driver)
3032 return -EBUSY;
3033
3034 udc->done = &done;
3035
3036 pullup_disable(udc);
3037 if (udc->transceiver) {
3038 otg_put_transceiver(udc->transceiver);
3039 udc->transceiver = NULL;
3040 }
3041 omap_writew(0, UDC_SYSCON1);
3042
3043 remove_proc_file();
3044
3045 #ifdef USE_ISO
3046 free_irq(pdev->resource[3].start, udc);
3047 #endif
3048 free_irq(pdev->resource[2].start, udc);
3049 free_irq(pdev->resource[1].start, udc);
3050
3051 if (udc->dc_clk) {
3052 if (udc->clk_requested)
3053 omap_udc_enable_clock(0);
3054 clk_put(udc->hhc_clk);
3055 clk_put(udc->dc_clk);
3056 }
3057
3058 release_mem_region(pdev->resource[0].start,
3059 pdev->resource[0].end - pdev->resource[0].start + 1);
3060
3061 device_unregister(&udc->gadget.dev);
3062 wait_for_completion(&done);
3063
3064 return 0;
3065 }
3066
3067 /* suspend/resume/wakeup from sysfs (echo > power/state) or when the
3068 * system is forced into deep sleep
3069 *
3070 * REVISIT we should probably reject suspend requests when there's a host
3071 * session active, rather than disconnecting, at least on boards that can
3072 * report VBUS irqs (UDC_DEVSTAT.UDC_ATT). And in any case, we need to
3073 * make host resumes and VBUS detection trigger OMAP wakeup events; that
3074 * may involve talking to an external transceiver (e.g. isp1301).
3075 */
3076
3077 static int omap_udc_suspend(struct platform_device *dev, pm_message_t message)
3078 {
3079 u32 devstat;
3080
3081 devstat = omap_readw(UDC_DEVSTAT);
3082
3083 /* we're requesting 48 MHz clock if the pullup is enabled
3084 * (== we're attached to the host) and we're not suspended,
3085 * which would prevent entry to deep sleep...
3086 */
3087 if ((devstat & UDC_ATT) != 0 && (devstat & UDC_SUS) == 0) {
3088 WARNING("session active; suspend requires disconnect\n");
3089 omap_pullup(&udc->gadget, 0);
3090 }
3091
3092 return 0;
3093 }
3094
3095 static int omap_udc_resume(struct platform_device *dev)
3096 {
3097 DBG("resume + wakeup/SRP\n");
3098 omap_pullup(&udc->gadget, 1);
3099
3100 /* maybe the host would enumerate us if we nudged it */
3101 msleep(100);
3102 return omap_wakeup(&udc->gadget);
3103 }
3104
3105 /*-------------------------------------------------------------------------*/
3106
3107 static struct platform_driver udc_driver = {
3108 .remove = __exit_p(omap_udc_remove),
3109 .suspend = omap_udc_suspend,
3110 .resume = omap_udc_resume,
3111 .driver = {
3112 .owner = THIS_MODULE,
3113 .name = (char *) driver_name,
3114 },
3115 };
3116
3117 static int __init udc_init(void)
3118 {
3119 /* Disable DMA for omap7xx -- it doesn't work right. */
3120 if (cpu_is_omap7xx())
3121 use_dma = 0;
3122
3123 INFO("%s, version: " DRIVER_VERSION
3124 #ifdef USE_ISO
3125 " (iso)"
3126 #endif
3127 "%s\n", driver_desc,
3128 use_dma ? " (dma)" : "");
3129 return platform_driver_probe(&udc_driver, omap_udc_probe);
3130 }
3131 module_init(udc_init);
3132
3133 static void __exit udc_exit(void)
3134 {
3135 platform_driver_unregister(&udc_driver);
3136 }
3137 module_exit(udc_exit);
3138
3139 MODULE_DESCRIPTION(DRIVER_DESC);
3140 MODULE_LICENSE("GPL");
3141 MODULE_ALIAS("platform:omap_udc");
linux-next