2 * Copyright 2008 Cavium Networks
4 * This file is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License, Version 2, as
6 * published by the Free Software Foundation.
9 #include <linux/platform_device.h>
10 #include <linux/atomic.h>
11 #include <mach/cns3xxx.h>
15 cns3xxx_ohci_start(struct usb_hcd
*hcd
)
17 struct ohci_hcd
*ohci
= hcd_to_ohci(hcd
);
21 * EHCI and OHCI share the same clock and power,
22 * resetting twice would cause the 1st controller been reset.
23 * Therefore only do power up at the first up device, and
24 * power down at the last down device.
26 * Set USB AHB INCR length to 16
28 if (atomic_inc_return(&usb_pwr_ref
) == 1) {
29 cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB
);
30 cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST
);
31 cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST
);
32 __raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG
) | (0X2 << 24)),
33 MISC_CHIP_CONFIG_REG
);
36 ret
= ohci_init(ohci
);
44 err("can't start %s", hcd
->self
.bus_name
);
51 static const struct hc_driver cns3xxx_ohci_hc_driver
= {
52 .description
= hcd_name
,
53 .product_desc
= "CNS3XXX OHCI Host controller",
54 .hcd_priv_size
= sizeof(struct ohci_hcd
),
56 .flags
= HCD_USB11
| HCD_MEMORY
,
57 .start
= cns3xxx_ohci_start
,
59 .shutdown
= ohci_shutdown
,
60 .urb_enqueue
= ohci_urb_enqueue
,
61 .urb_dequeue
= ohci_urb_dequeue
,
62 .endpoint_disable
= ohci_endpoint_disable
,
63 .get_frame_number
= ohci_get_frame
,
64 .hub_status_data
= ohci_hub_status_data
,
65 .hub_control
= ohci_hub_control
,
67 .bus_suspend
= ohci_bus_suspend
,
68 .bus_resume
= ohci_bus_resume
,
70 .start_port_reset
= ohci_start_port_reset
,
73 static int cns3xxx_ohci_probe(struct platform_device
*pdev
)
75 struct device
*dev
= &pdev
->dev
;
77 const struct hc_driver
*driver
= &cns3xxx_ohci_hc_driver
;
85 res
= platform_get_resource(pdev
, IORESOURCE_IRQ
, 0);
87 dev_err(dev
, "Found HC with no IRQ.\n");
92 hcd
= usb_create_hcd(driver
, dev
, dev_name(dev
));
96 res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
98 dev_err(dev
, "Found HC with no register addr.\n");
102 hcd
->rsrc_start
= res
->start
;
103 hcd
->rsrc_len
= res
->end
- res
->start
+ 1;
105 if (!request_mem_region(hcd
->rsrc_start
, hcd
->rsrc_len
,
106 driver
->description
)) {
107 dev_dbg(dev
, "controller already in use\n");
112 hcd
->regs
= ioremap(hcd
->rsrc_start
, hcd
->rsrc_len
);
114 dev_dbg(dev
, "error mapping memory\n");
119 ohci_hcd_init(hcd_to_ohci(hcd
));
121 retval
= usb_add_hcd(hcd
, irq
, IRQF_SHARED
);
127 release_mem_region(hcd
->rsrc_start
, hcd
->rsrc_len
);
133 static int cns3xxx_ohci_remove(struct platform_device
*pdev
)
135 struct usb_hcd
*hcd
= platform_get_drvdata(pdev
);
139 release_mem_region(hcd
->rsrc_start
, hcd
->rsrc_len
);
142 * EHCI and OHCI share the same clock and power,
143 * resetting twice would cause the 1st controller been reset.
144 * Therefore only do power up at the first up device, and
145 * power down at the last down device.
147 if (atomic_dec_return(&usb_pwr_ref
) == 0)
148 cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST
);
152 platform_set_drvdata(pdev
, NULL
);
157 MODULE_ALIAS("platform:cns3xxx-ohci");
159 static struct platform_driver ohci_hcd_cns3xxx_driver
= {
160 .probe
= cns3xxx_ohci_probe
,
161 .remove
= cns3xxx_ohci_remove
,
163 .name
= "cns3xxx-ohci",