Add linux-next specific files for 20110831
[linux-2.6/next.git] / arch / arm / mach-omap1 / board-voiceblue.c
blob8bbe8b10b251745fc3fa6a279dffaa75f88ba1f3
1 /*
2 * linux/arch/arm/mach-omap1/board-voiceblue.c
4 * Modified from board-generic.c
6 * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
8 * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
15 #include <linux/delay.h>
16 #include <linux/gpio.h>
17 #include <linux/platform_device.h>
18 #include <linux/interrupt.h>
19 #include <linux/irq.h>
20 #include <linux/init.h>
21 #include <linux/kernel.h>
22 #include <linux/mtd/physmap.h>
23 #include <linux/notifier.h>
24 #include <linux/reboot.h>
25 #include <linux/serial_8250.h>
26 #include <linux/serial_reg.h>
27 #include <linux/smc91x.h>
28 #include <linux/export.h>
30 #include <mach/hardware.h>
31 #include <mach/system.h>
32 #include <asm/mach-types.h>
33 #include <asm/mach/arch.h>
34 #include <asm/mach/map.h>
36 #include <plat/board-voiceblue.h>
37 #include <plat/common.h>
38 #include <plat/flash.h>
39 #include <plat/mux.h>
40 #include <plat/tc.h>
41 #include <plat/usb.h>
43 static struct plat_serial8250_port voiceblue_ports[] = {
45 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000),
46 .irq = OMAP_GPIO_IRQ(12),
47 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
48 .iotype = UPIO_MEM,
49 .regshift = 1,
50 .uartclk = 3686400,
53 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000),
54 .irq = OMAP_GPIO_IRQ(13),
55 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
56 .iotype = UPIO_MEM,
57 .regshift = 1,
58 .uartclk = 3686400,
61 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000),
62 .irq = OMAP_GPIO_IRQ(14),
63 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
64 .iotype = UPIO_MEM,
65 .regshift = 1,
66 .uartclk = 3686400,
69 .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000),
70 .irq = OMAP_GPIO_IRQ(15),
71 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
72 .iotype = UPIO_MEM,
73 .regshift = 1,
74 .uartclk = 3686400,
76 { },
79 static struct platform_device serial_device = {
80 .name = "serial8250",
81 .id = PLAT8250_DEV_PLATFORM1,
82 .dev = {
83 .platform_data = voiceblue_ports,
87 static int __init ext_uart_init(void)
89 if (!machine_is_voiceblue())
90 return -ENODEV;
92 return platform_device_register(&serial_device);
94 arch_initcall(ext_uart_init);
96 static struct physmap_flash_data voiceblue_flash_data = {
97 .width = 2,
98 .set_vpp = omap1_set_vpp,
101 static struct resource voiceblue_flash_resource = {
102 .start = OMAP_CS0_PHYS,
103 .end = OMAP_CS0_PHYS + SZ_32M - 1,
104 .flags = IORESOURCE_MEM,
107 static struct platform_device voiceblue_flash_device = {
108 .name = "physmap-flash",
109 .id = 0,
110 .dev = {
111 .platform_data = &voiceblue_flash_data,
113 .num_resources = 1,
114 .resource = &voiceblue_flash_resource,
117 static struct smc91x_platdata voiceblue_smc91x_info = {
118 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
119 .leda = RPC_LED_100_10,
120 .ledb = RPC_LED_TX_RX,
123 static struct resource voiceblue_smc91x_resources[] = {
124 [0] = {
125 .start = OMAP_CS2_PHYS + 0x300,
126 .end = OMAP_CS2_PHYS + 0x300 + 16,
127 .flags = IORESOURCE_MEM,
129 [1] = {
130 .start = OMAP_GPIO_IRQ(8),
131 .end = OMAP_GPIO_IRQ(8),
132 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
136 static struct platform_device voiceblue_smc91x_device = {
137 .name = "smc91x",
138 .id = 0,
139 .dev = {
140 .platform_data = &voiceblue_smc91x_info,
142 .num_resources = ARRAY_SIZE(voiceblue_smc91x_resources),
143 .resource = voiceblue_smc91x_resources,
146 static struct platform_device *voiceblue_devices[] __initdata = {
147 &voiceblue_flash_device,
148 &voiceblue_smc91x_device,
151 static struct omap_usb_config voiceblue_usb_config __initdata = {
152 .hmc_mode = 3,
153 .register_host = 1,
154 .register_dev = 1,
155 .pins[0] = 2,
156 .pins[1] = 6,
157 .pins[2] = 6,
160 static struct omap_board_config_kernel voiceblue_config[] = {
163 static void __init voiceblue_init_irq(void)
165 omap1_init_common_hw();
166 omap1_init_irq();
169 static void __init voiceblue_map_io(void)
171 omap1_map_common_io();
174 #define MACHINE_PANICED 1
175 #define MACHINE_REBOOTING 2
176 #define MACHINE_REBOOT 4
177 static unsigned long machine_state;
179 static int panic_event(struct notifier_block *this, unsigned long event,
180 void *ptr)
182 if (test_and_set_bit(MACHINE_PANICED, &machine_state))
183 return NOTIFY_DONE;
185 /* Flash power LED */
186 omap_writeb(0x78, OMAP_LPG1_LCR);
187 omap_writeb(0x01, OMAP_LPG1_PMR); /* Enable clock */
189 return NOTIFY_DONE;
192 static struct notifier_block panic_block = {
193 .notifier_call = panic_event,
196 static int __init voiceblue_setup(void)
198 if (!machine_is_voiceblue())
199 return -ENODEV;
201 /* Setup panic notifier */
202 atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
204 return 0;
206 postcore_initcall(voiceblue_setup);
208 static int wdt_gpio_state;
210 void voiceblue_wdt_enable(void)
212 gpio_direction_output(0, 0);
213 gpio_set_value(0, 1);
214 gpio_set_value(0, 0);
215 wdt_gpio_state = 0;
218 void voiceblue_wdt_disable(void)
220 gpio_set_value(0, 0);
221 gpio_set_value(0, 1);
222 gpio_set_value(0, 0);
223 gpio_direction_input(0);
226 void voiceblue_wdt_ping(void)
228 if (test_bit(MACHINE_REBOOT, &machine_state))
229 return;
231 wdt_gpio_state = !wdt_gpio_state;
232 gpio_set_value(0, wdt_gpio_state);
235 static void voiceblue_reset(char mode, const char *cmd)
238 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
239 * "Global Software Reset Affects Traffic Controller Frequency".
241 if (cpu_is_omap5912()) {
242 omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL);
243 omap_writew(0x8, ARM_RSTCT1);
246 set_bit(MACHINE_REBOOT, &machine_state);
247 voiceblue_wdt_enable();
248 while (1) ;
251 EXPORT_SYMBOL(voiceblue_wdt_enable);
252 EXPORT_SYMBOL(voiceblue_wdt_disable);
253 EXPORT_SYMBOL(voiceblue_wdt_ping);
255 static void __init voiceblue_init(void)
257 /* mux pins for uarts */
258 omap_cfg_reg(UART1_TX);
259 omap_cfg_reg(UART1_RTS);
260 omap_cfg_reg(UART2_TX);
261 omap_cfg_reg(UART2_RTS);
262 omap_cfg_reg(UART3_TX);
263 omap_cfg_reg(UART3_RX);
265 /* Watchdog */
266 gpio_request(0, "Watchdog");
267 /* smc91x reset */
268 gpio_request(7, "SMC91x reset");
269 gpio_direction_output(7, 1);
270 udelay(2); /* wait at least 100ns */
271 gpio_set_value(7, 0);
272 mdelay(50); /* 50ms until PHY ready */
273 /* smc91x interrupt pin */
274 gpio_request(8, "SMC91x irq");
275 /* 16C554 reset*/
276 gpio_request(6, "16C554 reset");
277 gpio_direction_output(6, 0);
278 /* 16C554 interrupt pins */
279 gpio_request(12, "16C554 irq");
280 gpio_request(13, "16C554 irq");
281 gpio_request(14, "16C554 irq");
282 gpio_request(15, "16C554 irq");
283 irq_set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
284 irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
285 irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
286 irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
288 platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
289 omap_board_config = voiceblue_config;
290 omap_board_config_size = ARRAY_SIZE(voiceblue_config);
291 omap_serial_init();
292 omap1_usb_init(&voiceblue_usb_config);
293 omap_register_i2c_bus(1, 100, NULL, 0);
295 /* There is a good chance board is going up, so enable power LED
296 * (it is connected through invertor) */
297 omap_writeb(0x00, OMAP_LPG1_LCR);
298 omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */
300 arch_reset = voiceblue_reset;
303 MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
304 /* Maintainer: Ladislav Michl <michl@2n.cz> */
305 .atag_offset = 0x100,
306 .map_io = voiceblue_map_io,
307 .reserve = omap_reserve,
308 .init_irq = voiceblue_init_irq,
309 .init_machine = voiceblue_init,
310 .timer = &omap1_timer,
311 MACHINE_END