Add linux-next specific files for 20110831
[linux-2.6/next.git] / arch / arm / mach-pxa / include / mach / pxa27x-udc.h
blob4cf28f6707063190cfb7dc3d06f3e5d21c2aa06e
1 #ifndef _ASM_ARCH_PXA27X_UDC_H
2 #define _ASM_ARCH_PXA27X_UDC_H
4 #ifdef _ASM_ARCH_PXA25X_UDC_H
5 #error You cannot include both PXA25x and PXA27x UDC support
6 #endif
8 #define UDCCR __REG(0x40600000) /* UDC Control Register */
9 #define UDCCR_OEN (1 << 31) /* On-the-Go Enable */
10 #define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation
11 Protocol Port Support */
12 #define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol
13 Support */
14 #define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol
15 Enable */
16 #define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */
17 #define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */
18 #define UDCCR_ACN_S 11
19 #define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */
20 #define UDCCR_AIN_S 8
21 #define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface
22 Setting Number */
23 #define UDCCR_AAISN_S 5
24 #define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active
25 Configuration */
26 #define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration
27 Error */
28 #define UDCCR_UDR (1 << 2) /* UDC Resume */
29 #define UDCCR_UDA (1 << 1) /* UDC Active */
30 #define UDCCR_UDE (1 << 0) /* UDC Enable */
32 #define UDCICR0 __REG(0x40600004) /* UDC Interrupt Control Register0 */
33 #define UDCICR1 __REG(0x40600008) /* UDC Interrupt Control Register1 */
34 #define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */
35 #define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */
37 #define UDC_INT_FIFOERROR (0x2)
38 #define UDC_INT_PACKETCMP (0x1)
40 #define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
41 #define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */
42 #define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */
43 #define UDCICR1_IERU (1 << 29) /* IntEn - Resume */
44 #define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */
45 #define UDCICR1_IERS (1 << 27) /* IntEn - Reset */
47 #define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
48 #define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */
49 #define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
50 #define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */
51 #define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */
52 #define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */
53 #define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */
54 #define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */
56 #define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */
57 #define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */
58 #define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */
59 #define UDCOTGICR_IEXR (1 << 17) /* Extra Transceiver Interrupt
60 Rising Edge Interrupt Enable */
61 #define UDCOTGICR_IEXF (1 << 16) /* Extra Transceiver Interrupt
62 Falling Edge Interrupt Enable */
63 #define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge
64 Interrupt Enable */
65 #define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge
66 Interrupt Enable */
67 #define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge
68 Interrupt Enable */
69 #define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge
70 Interrupt Enable */
71 #define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge
72 Interrupt Enable */
73 #define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge
74 Interrupt Enable */
75 #define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising
76 Edge Interrupt Enable */
77 #define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling
78 Edge Interrupt Enable */
79 #define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge
80 Interrupt Enable */
81 #define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge
82 Interrupt Enable */
84 #define UP2OCR __REG(0x40600020) /* USB Port 2 Output Control register */
85 #define UP3OCR __REG(0x40600024) /* USB Port 2 Output Control register */
87 #define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */
88 #define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */
89 #define UP2OCR_DPPDE (1 << 2) /* Host Port 2 Transceiver D+ Pull Down Enable */
90 #define UP2OCR_DMPDE (1 << 3) /* Host Port 2 Transceiver D- Pull Down Enable */
91 #define UP2OCR_DPPUE (1 << 4) /* Host Port 2 Transceiver D+ Pull Up Enable */
92 #define UP2OCR_DMPUE (1 << 5) /* Host Port 2 Transceiver D- Pull Up Enable */
93 #define UP2OCR_DPPUBE (1 << 6) /* Host Port 2 Transceiver D+ Pull Up Bypass Enable */
94 #define UP2OCR_DMPUBE (1 << 7) /* Host Port 2 Transceiver D- Pull Up Bypass Enable */
95 #define UP2OCR_EXSP (1 << 8) /* External Transceiver Speed Control */
96 #define UP2OCR_EXSUS (1 << 9) /* External Transceiver Speed Enable */
97 #define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */
98 #define UP2OCR_HXS (1 << 16) /* Host Port 2 Transceiver Output Select */
99 #define UP2OCR_HXOE (1 << 17) /* Host Port 2 Transceiver Output Enable */
100 #define UP2OCR_SEOS(x) ((x & 7) << 24) /* Single-Ended Output Select */
102 #define UDCCSN(x) __REG2(0x40600100, (x) << 2)
103 #define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
104 #define UDCCSR0_SA (1 << 7) /* Setup Active */
105 #define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */
106 #define UDCCSR0_FST (1 << 5) /* Force Stall */
107 #define UDCCSR0_SST (1 << 4) /* Sent Stall */
108 #define UDCCSR0_DME (1 << 3) /* DMA Enable */
109 #define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */
110 #define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */
111 #define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */
113 #define UDCCSRA __REG(0x40600104) /* UDC Control/Status register - Endpoint A */
114 #define UDCCSRB __REG(0x40600108) /* UDC Control/Status register - Endpoint B */
115 #define UDCCSRC __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */
116 #define UDCCSRD __REG(0x40600110) /* UDC Control/Status register - Endpoint D */
117 #define UDCCSRE __REG(0x40600114) /* UDC Control/Status register - Endpoint E */
118 #define UDCCSRF __REG(0x40600118) /* UDC Control/Status register - Endpoint F */
119 #define UDCCSRG __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */
120 #define UDCCSRH __REG(0x40600120) /* UDC Control/Status register - Endpoint H */
121 #define UDCCSRI __REG(0x40600124) /* UDC Control/Status register - Endpoint I */
122 #define UDCCSRJ __REG(0x40600128) /* UDC Control/Status register - Endpoint J */
123 #define UDCCSRK __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */
124 #define UDCCSRL __REG(0x40600130) /* UDC Control/Status register - Endpoint L */
125 #define UDCCSRM __REG(0x40600134) /* UDC Control/Status register - Endpoint M */
126 #define UDCCSRN __REG(0x40600138) /* UDC Control/Status register - Endpoint N */
127 #define UDCCSRP __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */
128 #define UDCCSRQ __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */
129 #define UDCCSRR __REG(0x40600144) /* UDC Control/Status register - Endpoint R */
130 #define UDCCSRS __REG(0x40600148) /* UDC Control/Status register - Endpoint S */
131 #define UDCCSRT __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */
132 #define UDCCSRU __REG(0x40600150) /* UDC Control/Status register - Endpoint U */
133 #define UDCCSRV __REG(0x40600154) /* UDC Control/Status register - Endpoint V */
134 #define UDCCSRW __REG(0x40600158) /* UDC Control/Status register - Endpoint W */
135 #define UDCCSRX __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */
137 #define UDCCSR_DPE (1 << 9) /* Data Packet Error */
138 #define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */
139 #define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */
140 #define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */
141 #define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */
142 #define UDCCSR_FST (1 << 5) /* Force STALL */
143 #define UDCCSR_SST (1 << 4) /* Sent STALL */
144 #define UDCCSR_DME (1 << 3) /* DMA Enable */
145 #define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */
146 #define UDCCSR_PC (1 << 1) /* Packet Complete */
147 #define UDCCSR_FS (1 << 0) /* FIFO needs service */
149 #define UDCBCN(x) __REG2(0x40600200, (x)<<2)
150 #define UDCBCR0 __REG(0x40600200) /* Byte Count Register - EP0 */
151 #define UDCBCRA __REG(0x40600204) /* Byte Count Register - EPA */
152 #define UDCBCRB __REG(0x40600208) /* Byte Count Register - EPB */
153 #define UDCBCRC __REG(0x4060020C) /* Byte Count Register - EPC */
154 #define UDCBCRD __REG(0x40600210) /* Byte Count Register - EPD */
155 #define UDCBCRE __REG(0x40600214) /* Byte Count Register - EPE */
156 #define UDCBCRF __REG(0x40600218) /* Byte Count Register - EPF */
157 #define UDCBCRG __REG(0x4060021C) /* Byte Count Register - EPG */
158 #define UDCBCRH __REG(0x40600220) /* Byte Count Register - EPH */
159 #define UDCBCRI __REG(0x40600224) /* Byte Count Register - EPI */
160 #define UDCBCRJ __REG(0x40600228) /* Byte Count Register - EPJ */
161 #define UDCBCRK __REG(0x4060022C) /* Byte Count Register - EPK */
162 #define UDCBCRL __REG(0x40600230) /* Byte Count Register - EPL */
163 #define UDCBCRM __REG(0x40600234) /* Byte Count Register - EPM */
164 #define UDCBCRN __REG(0x40600238) /* Byte Count Register - EPN */
165 #define UDCBCRP __REG(0x4060023C) /* Byte Count Register - EPP */
166 #define UDCBCRQ __REG(0x40600240) /* Byte Count Register - EPQ */
167 #define UDCBCRR __REG(0x40600244) /* Byte Count Register - EPR */
168 #define UDCBCRS __REG(0x40600248) /* Byte Count Register - EPS */
169 #define UDCBCRT __REG(0x4060024C) /* Byte Count Register - EPT */
170 #define UDCBCRU __REG(0x40600250) /* Byte Count Register - EPU */
171 #define UDCBCRV __REG(0x40600254) /* Byte Count Register - EPV */
172 #define UDCBCRW __REG(0x40600258) /* Byte Count Register - EPW */
173 #define UDCBCRX __REG(0x4060025C) /* Byte Count Register - EPX */
175 #define UDCDN(x) __REG2(0x40600300, (x)<<2)
176 #define PHYS_UDCDN(x) (0x40600300 + ((x)<<2))
177 #define PUDCDN(x) (volatile u32 *)(io_p2v(PHYS_UDCDN((x))))
178 #define UDCDR0 __REG(0x40600300) /* Data Register - EP0 */
179 #define UDCDRA __REG(0x40600304) /* Data Register - EPA */
180 #define UDCDRB __REG(0x40600308) /* Data Register - EPB */
181 #define UDCDRC __REG(0x4060030C) /* Data Register - EPC */
182 #define UDCDRD __REG(0x40600310) /* Data Register - EPD */
183 #define UDCDRE __REG(0x40600314) /* Data Register - EPE */
184 #define UDCDRF __REG(0x40600318) /* Data Register - EPF */
185 #define UDCDRG __REG(0x4060031C) /* Data Register - EPG */
186 #define UDCDRH __REG(0x40600320) /* Data Register - EPH */
187 #define UDCDRI __REG(0x40600324) /* Data Register - EPI */
188 #define UDCDRJ __REG(0x40600328) /* Data Register - EPJ */
189 #define UDCDRK __REG(0x4060032C) /* Data Register - EPK */
190 #define UDCDRL __REG(0x40600330) /* Data Register - EPL */
191 #define UDCDRM __REG(0x40600334) /* Data Register - EPM */
192 #define UDCDRN __REG(0x40600338) /* Data Register - EPN */
193 #define UDCDRP __REG(0x4060033C) /* Data Register - EPP */
194 #define UDCDRQ __REG(0x40600340) /* Data Register - EPQ */
195 #define UDCDRR __REG(0x40600344) /* Data Register - EPR */
196 #define UDCDRS __REG(0x40600348) /* Data Register - EPS */
197 #define UDCDRT __REG(0x4060034C) /* Data Register - EPT */
198 #define UDCDRU __REG(0x40600350) /* Data Register - EPU */
199 #define UDCDRV __REG(0x40600354) /* Data Register - EPV */
200 #define UDCDRW __REG(0x40600358) /* Data Register - EPW */
201 #define UDCDRX __REG(0x4060035C) /* Data Register - EPX */
203 #define UDCCN(x) __REG2(0x40600400, (x)<<2)
204 #define UDCCRA __REG(0x40600404) /* Configuration register EPA */
205 #define UDCCRB __REG(0x40600408) /* Configuration register EPB */
206 #define UDCCRC __REG(0x4060040C) /* Configuration register EPC */
207 #define UDCCRD __REG(0x40600410) /* Configuration register EPD */
208 #define UDCCRE __REG(0x40600414) /* Configuration register EPE */
209 #define UDCCRF __REG(0x40600418) /* Configuration register EPF */
210 #define UDCCRG __REG(0x4060041C) /* Configuration register EPG */
211 #define UDCCRH __REG(0x40600420) /* Configuration register EPH */
212 #define UDCCRI __REG(0x40600424) /* Configuration register EPI */
213 #define UDCCRJ __REG(0x40600428) /* Configuration register EPJ */
214 #define UDCCRK __REG(0x4060042C) /* Configuration register EPK */
215 #define UDCCRL __REG(0x40600430) /* Configuration register EPL */
216 #define UDCCRM __REG(0x40600434) /* Configuration register EPM */
217 #define UDCCRN __REG(0x40600438) /* Configuration register EPN */
218 #define UDCCRP __REG(0x4060043C) /* Configuration register EPP */
219 #define UDCCRQ __REG(0x40600440) /* Configuration register EPQ */
220 #define UDCCRR __REG(0x40600444) /* Configuration register EPR */
221 #define UDCCRS __REG(0x40600448) /* Configuration register EPS */
222 #define UDCCRT __REG(0x4060044C) /* Configuration register EPT */
223 #define UDCCRU __REG(0x40600450) /* Configuration register EPU */
224 #define UDCCRV __REG(0x40600454) /* Configuration register EPV */
225 #define UDCCRW __REG(0x40600458) /* Configuration register EPW */
226 #define UDCCRX __REG(0x4060045C) /* Configuration register EPX */
228 #define UDCCONR_CN (0x03 << 25) /* Configuration Number */
229 #define UDCCONR_CN_S (25)
230 #define UDCCONR_IN (0x07 << 22) /* Interface Number */
231 #define UDCCONR_IN_S (22)
232 #define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */
233 #define UDCCONR_AISN_S (19)
234 #define UDCCONR_EN (0x0f << 15) /* Endpoint Number */
235 #define UDCCONR_EN_S (15)
236 #define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */
237 #define UDCCONR_ET_S (13)
238 #define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */
239 #define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */
240 #define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */
241 #define UDCCONR_ET_NU (0x00 << 13) /* Not used */
242 #define UDCCONR_ED (1 << 12) /* Endpoint Direction */
243 #define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */
244 #define UDCCONR_MPS_S (2)
245 #define UDCCONR_DE (1 << 1) /* Double Buffering Enable */
246 #define UDCCONR_EE (1 << 0) /* Endpoint Enable */
249 #define UDC_INT_FIFOERROR (0x2)
250 #define UDC_INT_PACKETCMP (0x1)
252 #define UDC_FNR_MASK (0x7ff)
254 #define UDCCSR_WR_MASK (UDCCSR_DME|UDCCSR_FST)
255 #define UDC_BCR_MASK (0x3ff)
257 #endif