arch/arm/mach-pxa/include/mach/pxafb.h

   1 /*
   2  *  arch/arm/mach-pxa/include/mach/pxafb.h
   3  *
   4  *  Support for the xscale frame buffer.
   5  *
   6  *  Author:     Jean-Frederic Clere
   7  *  Created:    Sep 22, 2003
   8  *  Copyright:  jfclere@sinix.net
   9  *
  10  *  This program is free software; you can redistribute it and/or modify
  11  *  it under the terms of the GNU General Public License version 2 as
  12  *  published by the Free Software Foundation.
  13  */
  14
  15 #include <linux/fb.h>
  16 #include <mach/regs-lcd.h>
  17
  18 /*
  19  * Supported LCD connections
  20  *
  21  * bits 0 - 3: for LCD panel type:
  22  *
  23  *   STN  - for passive matrix
  24  *   DSTN - for dual scan passive matrix
  25  *   TFT  - for active matrix
  26  *
  27  * bits 4 - 9 : for bus width
  28  * bits 10-17 : for AC Bias Pin Frequency
  29  * bit     18 : for output enable polarity
  30  * bit     19 : for pixel clock edge
  31  * bit     20 : for output pixel format when base is RGBT16
  32  */
  33 #define LCD_CONN_TYPE(_x)       ((_x) & 0x0f)
  34 #define LCD_CONN_WIDTH(_x)      (((_x) >> 4) & 0x1f)
  35
  36 #define LCD_TYPE_MASK           0xf
  37 #define LCD_TYPE_UNKNOWN        0
  38 #define LCD_TYPE_MONO_STN       1
  39 #define LCD_TYPE_MONO_DSTN      2
  40 #define LCD_TYPE_COLOR_STN      3
  41 #define LCD_TYPE_COLOR_DSTN     4
  42 #define LCD_TYPE_COLOR_TFT      5
  43 #define LCD_TYPE_SMART_PANEL    6
  44 #define LCD_TYPE_MAX            7
  45
  46 #define LCD_MONO_STN_4BPP       ((4  << 4) | LCD_TYPE_MONO_STN)
  47 #define LCD_MONO_STN_8BPP       ((8  << 4) | LCD_TYPE_MONO_STN)
  48 #define LCD_MONO_DSTN_8BPP      ((8  << 4) | LCD_TYPE_MONO_DSTN)
  49 #define LCD_COLOR_STN_8BPP      ((8  << 4) | LCD_TYPE_COLOR_STN)
  50 #define LCD_COLOR_DSTN_16BPP    ((16 << 4) | LCD_TYPE_COLOR_DSTN)
  51 #define LCD_COLOR_TFT_8BPP      ((8  << 4) | LCD_TYPE_COLOR_TFT)
  52 #define LCD_COLOR_TFT_16BPP     ((16 << 4) | LCD_TYPE_COLOR_TFT)
  53 #define LCD_COLOR_TFT_18BPP     ((18 << 4) | LCD_TYPE_COLOR_TFT)
  54 #define LCD_SMART_PANEL_8BPP    ((8  << 4) | LCD_TYPE_SMART_PANEL)
  55 #define LCD_SMART_PANEL_16BPP   ((16 << 4) | LCD_TYPE_SMART_PANEL)
  56 #define LCD_SMART_PANEL_18BPP   ((18 << 4) | LCD_TYPE_SMART_PANEL)
  57
  58 #define LCD_AC_BIAS_FREQ(x)     (((x) & 0xff) << 10)
  59 #define LCD_BIAS_ACTIVE_HIGH    (0 << 18)
  60 #define LCD_BIAS_ACTIVE_LOW     (1 << 18)
  61 #define LCD_PCLK_EDGE_RISE      (0 << 19)
  62 #define LCD_PCLK_EDGE_FALL      (1 << 19)
  63 #define LCD_ALTERNATE_MAPPING   (1 << 20)
  64
  65 /*
  66  * This structure describes the machine which we are running on.
  67  * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine
  68  * of linux/drivers/video/pxafb.c
  69  */
  70 struct pxafb_mode_info {
  71         u_long          pixclock;
  72
  73         u_short         xres;
  74         u_short         yres;
  75
  76         u_char          bpp;
  77         u_int           cmap_greyscale:1,
  78                         depth:8,
  79                         transparency:1,
  80                         unused:22;
  81
  82         /* Parallel Mode Timing */
  83         u_char          hsync_len;
  84         u_char          left_margin;
  85         u_char          right_margin;
  86
  87         u_char          vsync_len;
  88         u_char          upper_margin;
  89         u_char          lower_margin;
  90         u_char          sync;
  91
  92         /* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details
  93          * Note:
  94          * 1. all parameters in nanosecond (ns)
  95          * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits
  96          *    in pxa27x and pxa3xx, initialize them to the same value or
  97          *    the larger one will be used
  98          * 3. same to {rd,wr}_pulse_width
  99          *
 100          * 4. LCD_PCLK_EDGE_{RISE,FALL} controls the L_PCLK_WR polarity
 101          * 5. sync & FB_SYNC_HOR_HIGH_ACT controls the L_LCLK_A0
 102          * 6. sync & FB_SYNC_VERT_HIGH_ACT controls the L_LCLK_RD
 103          */
 104         unsigned        a0csrd_set_hld; /* A0 and CS Setup/Hold Time before/after L_FCLK_RD */
 105         unsigned        a0cswr_set_hld; /* A0 and CS Setup/Hold Time before/after L_PCLK_WR */
 106         unsigned        wr_pulse_width; /* L_PCLK_WR pulse width */
 107         unsigned        rd_pulse_width; /* L_FCLK_RD pulse width */
 108         unsigned        cmd_inh_time;   /* Command Inhibit time between two writes */
 109         unsigned        op_hold_time;   /* Output Hold time from L_FCLK_RD negation */
 110 };
 111
 112 struct pxafb_mach_info {
 113         struct pxafb_mode_info *modes;
 114         unsigned int num_modes;
 115
 116         unsigned int    lcd_conn;
 117         unsigned long   video_mem_size;
 118
 119         u_int           fixed_modes:1,
 120                         cmap_inverse:1,
 121                         cmap_static:1,
 122                         acceleration_enabled:1,
 123                         unused:28;
 124
 125         /* The following should be defined in LCCR0
 126          *      LCCR0_Act or LCCR0_Pas          Active or Passive
 127          *      LCCR0_Sngl or LCCR0_Dual        Single/Dual panel
 128          *      LCCR0_Mono or LCCR0_Color       Mono/Color
 129          *      LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode)
 130          *      LCCR0_DMADel(Tcpu) (optional)   DMA request delay
 131          *
 132          * The following should not be defined in LCCR0:
 133          *      LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM
 134          *      LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB
 135          */
 136         u_int           lccr0;
 137         /* The following should be defined in LCCR3
 138          *      LCCR3_OutEnH or LCCR3_OutEnL    Output enable polarity
 139          *      LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type
 140          *      LCCR3_Acb(X)                    AB Bias pin frequency
 141          *      LCCR3_DPC (optional)            Double Pixel Clock mode (untested)
 142          *
 143          * The following should not be defined in LCCR3
 144          *      LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp
 145          */
 146         u_int           lccr3;
 147         /* The following should be defined in LCCR4
 148          *      LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2
 149          *
 150          * All other bits in LCCR4 should be left alone.
 151          */
 152         u_int           lccr4;
 153         void (*pxafb_backlight_power)(int);
 154         void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
 155         void (*smart_update)(struct fb_info *);
 156 };
 157
 158 void pxa_set_fb_info(struct device *, struct pxafb_mach_info *);
 159 unsigned long pxafb_get_hsync_time(struct device *dev);
 160
 161 extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
 162 extern int pxafb_smart_flush(struct fb_info *info);