Add linux-next specific files for 20110831
[linux-2.6/next.git] / arch / parisc / include / asm / dma.h
blobf7a18f96870347172594335092840aa10a060683
1 /* asm/dma.h: Defines for using and allocating dma channels.
2 * Written by Hennus Bergman, 1992.
3 * High DMA channel support & info by Hannu Savolainen
4 * and John Boyd, Nov. 1992.
5 * (c) Copyright 2000, Grant Grundler
6 */
8 #ifndef _ASM_DMA_H
9 #define _ASM_DMA_H
11 #include <asm/io.h> /* need byte IO */
12 #include <asm/system.h>
14 #define dma_outb outb
15 #define dma_inb inb
18 ** DMA_CHUNK_SIZE is used by the SCSI mid-layer to break up
19 ** (or rather not merge) DMAs into manageable chunks.
20 ** On parisc, this is more of the software/tuning constraint
21 ** rather than the HW. I/O MMU allocation algorithms can be
22 ** faster with smaller sizes (to some degree).
24 #define DMA_CHUNK_SIZE (BITS_PER_LONG*PAGE_SIZE)
26 /* The maximum address that we can perform a DMA transfer to on this platform
27 ** New dynamic DMA interfaces should obsolete this....
29 #define MAX_DMA_ADDRESS (~0UL)
32 ** We don't have DMA channels... well V-class does but the
33 ** Dynamic DMA Mapping interface will support them... right? :^)
34 ** Note: this is not relevant right now for PA-RISC, but we cannot
35 ** leave this as undefined because some things (e.g. sound)
36 ** won't compile :-(
38 #define MAX_DMA_CHANNELS 8
39 #define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */
40 #define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */
41 #define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */
43 #define DMA_AUTOINIT 0x10
45 /* 8237 DMA controllers */
46 #define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */
47 #define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */
49 /* DMA controller registers */
50 #define DMA1_CMD_REG 0x08 /* command register (w) */
51 #define DMA1_STAT_REG 0x08 /* status register (r) */
52 #define DMA1_REQ_REG 0x09 /* request register (w) */
53 #define DMA1_MASK_REG 0x0A /* single-channel mask (w) */
54 #define DMA1_MODE_REG 0x0B /* mode register (w) */
55 #define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */
56 #define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */
57 #define DMA1_RESET_REG 0x0D /* Master Clear (w) */
58 #define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */
59 #define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */
60 #define DMA1_EXT_MODE_REG (0x400 | DMA1_MODE_REG)
62 #define DMA2_CMD_REG 0xD0 /* command register (w) */
63 #define DMA2_STAT_REG 0xD0 /* status register (r) */
64 #define DMA2_REQ_REG 0xD2 /* request register (w) */
65 #define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */
66 #define DMA2_MODE_REG 0xD6 /* mode register (w) */
67 #define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */
68 #define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */
69 #define DMA2_RESET_REG 0xDA /* Master Clear (w) */
70 #define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */
71 #define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */
72 #define DMA2_EXT_MODE_REG (0x400 | DMA2_MODE_REG)
74 static __inline__ unsigned long claim_dma_lock(void)
76 return 0;
79 static __inline__ void release_dma_lock(unsigned long flags)
84 /* Get DMA residue count. After a DMA transfer, this
85 * should return zero. Reading this while a DMA transfer is
86 * still in progress will return unpredictable results.
87 * If called before the channel has been used, it may return 1.
88 * Otherwise, it returns the number of _bytes_ left to transfer.
90 * Assumes DMA flip-flop is clear.
92 static __inline__ int get_dma_residue(unsigned int dmanr)
94 unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
95 : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
97 /* using short to get 16-bit wrap around */
98 unsigned short count;
100 count = 1 + dma_inb(io_port);
101 count += dma_inb(io_port) << 8;
103 return (dmanr<=3)? count : (count<<1);
106 /* enable/disable a specific DMA channel */
107 static __inline__ void enable_dma(unsigned int dmanr)
109 #ifdef CONFIG_SUPERIO
110 if (dmanr<=3)
111 dma_outb(dmanr, DMA1_MASK_REG);
112 else
113 dma_outb(dmanr & 3, DMA2_MASK_REG);
114 #endif
117 static __inline__ void disable_dma(unsigned int dmanr)
119 #ifdef CONFIG_SUPERIO
120 if (dmanr<=3)
121 dma_outb(dmanr | 4, DMA1_MASK_REG);
122 else
123 dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
124 #endif
127 /* reserve a DMA channel */
128 #define request_dma(dmanr, device_id) (0)
130 /* Clear the 'DMA Pointer Flip Flop'.
131 * Write 0 for LSB/MSB, 1 for MSB/LSB access.
132 * Use this once to initialize the FF to a known state.
133 * After that, keep track of it. :-)
134 * --- In order to do that, the DMA routines below should ---
135 * --- only be used while holding the DMA lock ! ---
137 static __inline__ void clear_dma_ff(unsigned int dmanr)
141 /* set mode (above) for a specific DMA channel */
142 static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
146 /* Set only the page register bits of the transfer address.
147 * This is used for successive transfers when we know the contents of
148 * the lower 16 bits of the DMA current address register, but a 64k boundary
149 * may have been crossed.
151 static __inline__ void set_dma_page(unsigned int dmanr, char pagenr)
156 /* Set transfer address & page bits for specific DMA channel.
157 * Assumes dma flipflop is clear.
159 static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
164 /* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
165 * a specific DMA channel.
166 * You must ensure the parameters are valid.
167 * NOTE: from a manual: "the number of transfers is one more
168 * than the initial word count"! This is taken into account.
169 * Assumes dma flip-flop is clear.
170 * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
172 static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
177 #define free_dma(dmanr)
179 #ifdef CONFIG_PCI
180 extern int isa_dma_bridge_buggy;
181 #else
182 #define isa_dma_bridge_buggy (0)
183 #endif
185 #endif /* _ASM_DMA_H */