Add linux-next specific files for 20110831
[linux-2.6/next.git] / arch / powerpc / boot / dts / tqm8555.dts
blob81bad8cd37561c6db1b689ee7ede25c0b01a6032
1 /*
2  * TQM 8555 Device Tree Source
3  *
4  * Copyright 2008 Freescale Semiconductor Inc.
5  *
6  * This program is free software; you can redistribute  it and/or modify it
7  * under  the terms of  the GNU General  Public License as published by the
8  * Free Software Foundation;  either version 2 of the  License, or (at your
9  * option) any later version.
10  */
12 /dts-v1/;
14 / {
15         model = "tqc,tqm8555";
16         compatible = "tqc,tqm8555";
17         #address-cells = <1>;
18         #size-cells = <1>;
20         aliases {
21                 ethernet0 = &enet0;
22                 ethernet1 = &enet1;
23                 serial0 = &serial0;
24                 serial1 = &serial1;
25                 pci0 = &pci0;
26         };
28         cpus {
29                 #address-cells = <1>;
30                 #size-cells = <0>;
32                 PowerPC,8555@0 {
33                         device_type = "cpu";
34                         reg = <0>;
35                         d-cache-line-size = <32>;
36                         i-cache-line-size = <32>;
37                         d-cache-size = <32768>;
38                         i-cache-size = <32768>;
39                         timebase-frequency = <0>;
40                         bus-frequency = <0>;
41                         clock-frequency = <0>;
42                         next-level-cache = <&L2>;
43                 };
44         };
46         memory {
47                 device_type = "memory";
48                 reg = <0x00000000 0x10000000>;
49         };
51         soc@e0000000 {
52                 #address-cells = <1>;
53                 #size-cells = <1>;
54                 device_type = "soc";
55                 ranges = <0x0 0xe0000000 0x100000>;
56                 bus-frequency = <0>;
57                 compatible = "fsl,mpc8555-immr", "simple-bus";
59                 ecm-law@0 {
60                         compatible = "fsl,ecm-law";
61                         reg = <0x0 0x1000>;
62                         fsl,num-laws = <8>;
63                 };
65                 ecm@1000 {
66                         compatible = "fsl,mpc8555-ecm", "fsl,ecm";
67                         reg = <0x1000 0x1000>;
68                         interrupts = <17 2>;
69                         interrupt-parent = <&mpic>;
70                 };
72                 memory-controller@2000 {
73                         compatible = "fsl,mpc8540-memory-controller";
74                         reg = <0x2000 0x1000>;
75                         interrupt-parent = <&mpic>;
76                         interrupts = <18 2>;
77                 };
79                 L2: l2-cache-controller@20000 {
80                         compatible = "fsl,mpc8540-l2-cache-controller";
81                         reg = <0x20000 0x1000>;
82                         cache-line-size = <32>;
83                         cache-size = <0x40000>; // L2, 256K
84                         interrupt-parent = <&mpic>;
85                         interrupts = <16 2>;
86                 };
88                 i2c@3000 {
89                         #address-cells = <1>;
90                         #size-cells = <0>;
91                         cell-index = <0>;
92                         compatible = "fsl-i2c";
93                         reg = <0x3000 0x100>;
94                         interrupts = <43 2>;
95                         interrupt-parent = <&mpic>;
96                         dfsrr;
98                         dtt@48 {
99                                 compatible = "national,lm75";
100                                 reg = <0x48>;
101                         };
103                         rtc@68 {
104                                 compatible = "dallas,ds1337";
105                                 reg = <0x68>;
106                         };
107                 };
109                 dma@21300 {
110                         #address-cells = <1>;
111                         #size-cells = <1>;
112                         compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
113                         reg = <0x21300 0x4>;
114                         ranges = <0x0 0x21100 0x200>;
115                         cell-index = <0>;
116                         dma-channel@0 {
117                                 compatible = "fsl,mpc8555-dma-channel",
118                                                 "fsl,eloplus-dma-channel";
119                                 reg = <0x0 0x80>;
120                                 cell-index = <0>;
121                                 interrupt-parent = <&mpic>;
122                                 interrupts = <20 2>;
123                         };
124                         dma-channel@80 {
125                                 compatible = "fsl,mpc8555-dma-channel",
126                                                 "fsl,eloplus-dma-channel";
127                                 reg = <0x80 0x80>;
128                                 cell-index = <1>;
129                                 interrupt-parent = <&mpic>;
130                                 interrupts = <21 2>;
131                         };
132                         dma-channel@100 {
133                                 compatible = "fsl,mpc8555-dma-channel",
134                                                 "fsl,eloplus-dma-channel";
135                                 reg = <0x100 0x80>;
136                                 cell-index = <2>;
137                                 interrupt-parent = <&mpic>;
138                                 interrupts = <22 2>;
139                         };
140                         dma-channel@180 {
141                                 compatible = "fsl,mpc8555-dma-channel",
142                                                 "fsl,eloplus-dma-channel";
143                                 reg = <0x180 0x80>;
144                                 cell-index = <3>;
145                                 interrupt-parent = <&mpic>;
146                                 interrupts = <23 2>;
147                         };
148                 };
150                 enet0: ethernet@24000 {
151                         #address-cells = <1>;
152                         #size-cells = <1>;
153                         cell-index = <0>;
154                         device_type = "network";
155                         model = "TSEC";
156                         compatible = "gianfar";
157                         reg = <0x24000 0x1000>;
158                         ranges = <0x0 0x24000 0x1000>;
159                         local-mac-address = [ 00 00 00 00 00 00 ];
160                         interrupts = <29 2 30 2 34 2>;
161                         interrupt-parent = <&mpic>;
162                         tbi-handle = <&tbi0>;
163                         phy-handle = <&phy2>;
165                         mdio@520 {
166                                 #address-cells = <1>;
167                                 #size-cells = <0>;
168                                 compatible = "fsl,gianfar-mdio";
169                                 reg = <0x520 0x20>;
171                                 phy1: ethernet-phy@1 {
172                                         interrupt-parent = <&mpic>;
173                                         interrupts = <8 1>;
174                                         reg = <1>;
175                                         device_type = "ethernet-phy";
176                                 };
177                                 phy2: ethernet-phy@2 {
178                                         interrupt-parent = <&mpic>;
179                                         interrupts = <8 1>;
180                                         reg = <2>;
181                                         device_type = "ethernet-phy";
182                                 };
183                                 phy3: ethernet-phy@3 {
184                                         interrupt-parent = <&mpic>;
185                                         interrupts = <8 1>;
186                                         reg = <3>;
187                                         device_type = "ethernet-phy";
188                                 };
189                                 tbi0: tbi-phy@11 {
190                                         reg = <0x11>;
191                                         device_type = "tbi-phy";
192                                 };
193                         };
194                 };
196                 enet1: ethernet@25000 {
197                         #address-cells = <1>;
198                         #size-cells = <1>;
199                         cell-index = <1>;
200                         device_type = "network";
201                         model = "TSEC";
202                         compatible = "gianfar";
203                         reg = <0x25000 0x1000>;
204                         ranges = <0x0 0x25000 0x1000>;
205                         local-mac-address = [ 00 00 00 00 00 00 ];
206                         interrupts = <35 2 36 2 40 2>;
207                         interrupt-parent = <&mpic>;
208                         tbi-handle = <&tbi1>;
209                         phy-handle = <&phy1>;
211                         mdio@520 {
212                                 #address-cells = <1>;
213                                 #size-cells = <0>;
214                                 compatible = "fsl,gianfar-tbi";
215                                 reg = <0x520 0x20>;
217                                 tbi1: tbi-phy@11 {
218                                         reg = <0x11>;
219                                         device_type = "tbi-phy";
220                                 };
221                         };
222                 };
224                 serial0: serial@4500 {
225                         cell-index = <0>;
226                         device_type = "serial";
227                         compatible = "ns16550";
228                         reg = <0x4500 0x100>;   // reg base, size
229                         clock-frequency = <0>;  // should we fill in in uboot?
230                         interrupts = <42 2>;
231                         interrupt-parent = <&mpic>;
232                 };
234                 serial1: serial@4600 {
235                         cell-index = <1>;
236                         device_type = "serial";
237                         compatible = "ns16550";
238                         reg = <0x4600 0x100>;   // reg base, size
239                         clock-frequency = <0>;  // should we fill in in uboot?
240                         interrupts = <42 2>;
241                         interrupt-parent = <&mpic>;
242                 };
244                 crypto@30000 {
245                         compatible = "fsl,sec2.0";
246                         reg = <0x30000 0x10000>;
247                         interrupts = <45 2>;
248                         interrupt-parent = <&mpic>;
249                         fsl,num-channels = <4>;
250                         fsl,channel-fifo-len = <24>;
251                         fsl,exec-units-mask = <0x7e>;
252                         fsl,descriptor-types-mask = <0x01010ebf>;
253                 };
255                 mpic: pic@40000 {
256                         interrupt-controller;
257                         #address-cells = <0>;
258                         #interrupt-cells = <2>;
259                         reg = <0x40000 0x40000>;
260                         device_type = "open-pic";
261                         compatible = "chrp,open-pic";
262                 };
264                 cpm@919c0 {
265                         #address-cells = <1>;
266                         #size-cells = <1>;
267                         compatible = "fsl,mpc8555-cpm", "fsl,cpm2", "simple-bus";
268                         reg = <0x919c0 0x30>;
269                         ranges;
271                         muram@80000 {
272                                 #address-cells = <1>;
273                                 #size-cells = <1>;
274                                 ranges = <0 0x80000 0x10000>;
276                                 data@0 {
277                                         compatible = "fsl,cpm-muram-data";
278                                         reg = <0 0x2000 0x9000 0x1000>;
279                                 };
280                         };
282                         brg@919f0 {
283                                 compatible = "fsl,mpc8555-brg",
284                                              "fsl,cpm2-brg",
285                                              "fsl,cpm-brg";
286                                 reg = <0x919f0 0x10 0x915f0 0x10>;
287                                 clock-frequency = <0>;
288                         };
290                         cpmpic: pic@90c00 {
291                                 interrupt-controller;
292                                 #address-cells = <0>;
293                                 #interrupt-cells = <2>;
294                                 interrupts = <46 2>;
295                                 interrupt-parent = <&mpic>;
296                                 reg = <0x90c00 0x80>;
297                                 compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic";
298                         };
299                 };
300         };
302         pci0: pci@e0008000 {
303                 #interrupt-cells = <1>;
304                 #size-cells = <2>;
305                 #address-cells = <3>;
306                 compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
307                 device_type = "pci";
308                 reg = <0xe0008000 0x1000>;
309                 clock-frequency = <66666666>;
310                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
311                 interrupt-map = <
312                                 /* IDSEL 28 */
313                                  0xe000 0 0 1 &mpic 2 1
314                                  0xe000 0 0 2 &mpic 3 1
315                                  0xe000 0 0 3 &mpic 6 1
316                                  0xe000 0 0 4 &mpic 5 1
318                                 /* IDSEL 11 */
319                                  0x5800 0 0 1 &mpic 6 1
320                                  0x5800 0 0 2 &mpic 5 1
321                                  >;
323                 interrupt-parent = <&mpic>;
324                 interrupts = <24 2>;
325                 bus-range = <0 0>;
326                 ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
327                           0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
328         };