Add linux-next specific files for 20110831
[linux-2.6/next.git] / arch / um / kernel / trap.c
blob8c7b8823d1f0e1257f3a410620048bbd3556d95b
1 /*
2 * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
3 * Licensed under the GPL
4 */
6 #include <linux/mm.h>
7 #include <linux/sched.h>
8 #include <linux/hardirq.h>
9 #include <asm/current.h>
10 #include <asm/pgtable.h>
11 #include <asm/tlbflush.h>
12 #include "arch.h"
13 #include "as-layout.h"
14 #include "kern_util.h"
15 #include "os.h"
16 #include "skas.h"
17 #include "sysdep/sigcontext.h"
20 * Note this is constrained to return 0, -EFAULT, -EACCESS, -ENOMEM by
21 * segv().
23 int handle_page_fault(unsigned long address, unsigned long ip,
24 int is_write, int is_user, int *code_out)
26 struct mm_struct *mm = current->mm;
27 struct vm_area_struct *vma;
28 pgd_t *pgd;
29 pud_t *pud;
30 pmd_t *pmd;
31 pte_t *pte;
32 int err = -EFAULT;
34 *code_out = SEGV_MAPERR;
37 * If the fault was during atomic operation, don't take the fault, just
38 * fail.
40 if (in_atomic())
41 goto out_nosemaphore;
43 down_read(&mm->mmap_sem);
44 vma = find_vma(mm, address);
45 if (!vma)
46 goto out;
47 else if (vma->vm_start <= address)
48 goto good_area;
49 else if (!(vma->vm_flags & VM_GROWSDOWN))
50 goto out;
51 else if (is_user && !ARCH_IS_STACKGROW(address))
52 goto out;
53 else if (expand_stack(vma, address))
54 goto out;
56 good_area:
57 *code_out = SEGV_ACCERR;
58 if (is_write && !(vma->vm_flags & VM_WRITE))
59 goto out;
61 /* Don't require VM_READ|VM_EXEC for write faults! */
62 if (!is_write && !(vma->vm_flags & (VM_READ | VM_EXEC)))
63 goto out;
65 do {
66 int fault;
68 fault = handle_mm_fault(mm, vma, address, is_write ? FAULT_FLAG_WRITE : 0);
69 if (unlikely(fault & VM_FAULT_ERROR)) {
70 if (fault & VM_FAULT_OOM) {
71 goto out_of_memory;
72 } else if (fault & VM_FAULT_SIGBUS) {
73 err = -EACCES;
74 goto out;
76 BUG();
78 if (fault & VM_FAULT_MAJOR)
79 current->maj_flt++;
80 else
81 current->min_flt++;
83 pgd = pgd_offset(mm, address);
84 pud = pud_offset(pgd, address);
85 pmd = pmd_offset(pud, address);
86 pte = pte_offset_kernel(pmd, address);
87 } while (!pte_present(*pte));
88 err = 0;
90 * The below warning was added in place of
91 * pte_mkyoung(); if (is_write) pte_mkdirty();
92 * If it's triggered, we'd see normally a hang here (a clean pte is
93 * marked read-only to emulate the dirty bit).
94 * However, the generic code can mark a PTE writable but clean on a
95 * concurrent read fault, triggering this harmlessly. So comment it out.
97 #if 0
98 WARN_ON(!pte_young(*pte) || (is_write && !pte_dirty(*pte)));
99 #endif
100 flush_tlb_page(vma, address);
101 out:
102 up_read(&mm->mmap_sem);
103 out_nosemaphore:
104 return err;
106 out_of_memory:
108 * We ran out of memory, call the OOM killer, and return the userspace
109 * (which will retry the fault, or kill us if we got oom-killed).
111 up_read(&mm->mmap_sem);
112 pagefault_out_of_memory();
113 return 0;
116 static void show_segv_info(struct uml_pt_regs *regs)
118 struct task_struct *tsk = current;
119 struct faultinfo *fi = UPT_FAULTINFO(regs);
121 if (!unhandled_signal(tsk, SIGSEGV))
122 return;
124 if (!printk_ratelimit())
125 return;
127 printk("%s%s[%d]: segfault at %lx ip %p sp %p error %x",
128 task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
129 tsk->comm, task_pid_nr(tsk), FAULT_ADDRESS(*fi),
130 (void *)UPT_IP(regs), (void *)UPT_SP(regs),
131 fi->error_code);
133 print_vma_addr(KERN_CONT " in ", UPT_IP(regs));
134 printk(KERN_CONT "\n");
137 static void bad_segv(struct faultinfo fi, unsigned long ip)
139 struct siginfo si;
141 si.si_signo = SIGSEGV;
142 si.si_code = SEGV_ACCERR;
143 si.si_addr = (void __user *) FAULT_ADDRESS(fi);
144 current->thread.arch.faultinfo = fi;
145 force_sig_info(SIGSEGV, &si, current);
148 void fatal_sigsegv(void)
150 force_sigsegv(SIGSEGV, current);
151 do_signal();
153 * This is to tell gcc that we're not returning - do_signal
154 * can, in general, return, but in this case, it's not, since
155 * we just got a fatal SIGSEGV queued.
157 os_dump_core();
160 void segv_handler(int sig, struct uml_pt_regs *regs)
162 struct faultinfo * fi = UPT_FAULTINFO(regs);
164 if (UPT_IS_USER(regs) && !SEGV_IS_FIXABLE(fi)) {
165 show_segv_info(regs);
166 bad_segv(*fi, UPT_IP(regs));
167 return;
169 segv(*fi, UPT_IP(regs), UPT_IS_USER(regs), regs);
173 * We give a *copy* of the faultinfo in the regs to segv.
174 * This must be done, since nesting SEGVs could overwrite
175 * the info in the regs. A pointer to the info then would
176 * give us bad data!
178 unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user,
179 struct uml_pt_regs *regs)
181 struct siginfo si;
182 jmp_buf *catcher;
183 int err;
184 int is_write = FAULT_WRITE(fi);
185 unsigned long address = FAULT_ADDRESS(fi);
187 if (!is_user && (address >= start_vm) && (address < end_vm)) {
188 flush_tlb_kernel_vm();
189 return 0;
191 else if (current->mm == NULL) {
192 show_regs(container_of(regs, struct pt_regs, regs));
193 panic("Segfault with no mm");
196 if (SEGV_IS_FIXABLE(&fi) || SEGV_MAYBE_FIXABLE(&fi))
197 err = handle_page_fault(address, ip, is_write, is_user,
198 &si.si_code);
199 else {
200 err = -EFAULT;
202 * A thread accessed NULL, we get a fault, but CR2 is invalid.
203 * This code is used in __do_copy_from_user() of TT mode.
204 * XXX tt mode is gone, so maybe this isn't needed any more
206 address = 0;
209 catcher = current->thread.fault_catcher;
210 if (!err)
211 return 0;
212 else if (catcher != NULL) {
213 current->thread.fault_addr = (void *) address;
214 UML_LONGJMP(catcher, 1);
216 else if (current->thread.fault_addr != NULL)
217 panic("fault_addr set but no fault catcher");
218 else if (!is_user && arch_fixup(ip, regs))
219 return 0;
221 if (!is_user) {
222 show_regs(container_of(regs, struct pt_regs, regs));
223 panic("Kernel mode fault at addr 0x%lx, ip 0x%lx",
224 address, ip);
227 show_segv_info(regs);
229 if (err == -EACCES) {
230 si.si_signo = SIGBUS;
231 si.si_errno = 0;
232 si.si_code = BUS_ADRERR;
233 si.si_addr = (void __user *)address;
234 current->thread.arch.faultinfo = fi;
235 force_sig_info(SIGBUS, &si, current);
236 } else {
237 BUG_ON(err != -EFAULT);
238 si.si_signo = SIGSEGV;
239 si.si_addr = (void __user *) address;
240 current->thread.arch.faultinfo = fi;
241 force_sig_info(SIGSEGV, &si, current);
243 return 0;
246 void relay_signal(int sig, struct uml_pt_regs *regs)
248 if (!UPT_IS_USER(regs)) {
249 if (sig == SIGBUS)
250 printk(KERN_ERR "Bus error - the host /dev/shm or /tmp "
251 "mount likely just ran out of space\n");
252 panic("Kernel mode signal %d", sig);
255 arch_examine_signal(sig, regs);
257 current->thread.arch.faultinfo = *UPT_FAULTINFO(regs);
258 force_sig(sig, current);
261 void bus_handler(int sig, struct uml_pt_regs *regs)
263 if (current->thread.fault_catcher != NULL)
264 UML_LONGJMP(current->thread.fault_catcher, 1);
265 else relay_signal(sig, regs);
268 void winch(int sig, struct uml_pt_regs *regs)
270 do_IRQ(WINCH_IRQ, regs);
273 void trap_init(void)