drivers/input/keyboard/nomadik-ske-keypad.c

   1 /*
   2  * Copyright (C) ST-Ericsson SA 2010
   3  *
   4  * Author: Naveen Kumar G <naveen.gaddipati@stericsson.com> for ST-Ericsson
   5  * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
   6  *
   7  * License terms:GNU General Public License (GPL) version 2
   8  *
   9  * Keypad controller driver for the SKE (Scroll Key Encoder) module used in
  10  * the Nomadik 8815 and Ux500 platforms.
  11  */
  12
  13 #include <linux/platform_device.h>
  14 #include <linux/interrupt.h>
  15 #include <linux/spinlock.h>
  16 #include <linux/io.h>
  17 #include <linux/delay.h>
  18 #include <linux/input.h>
  19 #include <linux/slab.h>
  20 #include <linux/clk.h>
  21 #include <linux/module.h>
  22
  23 #include <plat/ske.h>
  24
  25 /* SKE_CR bits */
  26 #define SKE_KPMLT       (0x1 << 6)
  27 #define SKE_KPCN        (0x7 << 3)
  28 #define SKE_KPASEN      (0x1 << 2)
  29 #define SKE_KPASON      (0x1 << 7)
  30
  31 /* SKE_IMSC bits */
  32 #define SKE_KPIMA       (0x1 << 2)
  33
  34 /* SKE_ICR bits */
  35 #define SKE_KPICS       (0x1 << 3)
  36 #define SKE_KPICA       (0x1 << 2)
  37
  38 /* SKE_RIS bits */
  39 #define SKE_KPRISA      (0x1 << 2)
  40
  41 #define SKE_KEYPAD_ROW_SHIFT    3
  42 #define SKE_KPD_KEYMAP_SIZE     (8 * 8)
  43
  44 /* keypad auto scan registers */
  45 #define SKE_ASR0        0x20
  46 #define SKE_ASR1        0x24
  47 #define SKE_ASR2        0x28
  48 #define SKE_ASR3        0x2C
  49
  50 #define SKE_NUM_ASRX_REGISTERS  (4)
  51
  52 /**
  53  * struct ske_keypad  - data structure used by keypad driver
  54  * @irq:        irq no
  55  * @reg_base:   ske regsiters base address
  56  * @input:      pointer to input device object
  57  * @board:      keypad platform device
  58  * @keymap:     matrix scan code table for keycodes
  59  * @clk:        clock structure pointer
  60  */
  61 struct ske_keypad {
  62         int irq;
  63         void __iomem *reg_base;
  64         struct input_dev *input;
  65         const struct ske_keypad_platform_data *board;
  66         unsigned short keymap[SKE_KPD_KEYMAP_SIZE];
  67         struct clk *clk;
  68         spinlock_t ske_keypad_lock;
  69 };
  70
  71 static void ske_keypad_set_bits(struct ske_keypad *keypad, u16 addr,
  72                 u8 mask, u8 data)
  73 {
  74         u32 ret;
  75
  76         spin_lock(&keypad->ske_keypad_lock);
  77
  78         ret = readl(keypad->reg_base + addr);
  79         ret &= ~mask;
  80         ret |= data;
  81         writel(ret, keypad->reg_base + addr);
  82
  83         spin_unlock(&keypad->ske_keypad_lock);
  84 }
  85
  86 /*
  87  * ske_keypad_chip_init: init keypad controller configuration
  88  *
  89  * Enable Multi key press detection, auto scan mode
  90  */
  91 static int __devinit ske_keypad_chip_init(struct ske_keypad *keypad)
  92 {
  93         u32 value;
  94         int timeout = 50;
  95
  96         /* check SKE_RIS to be 0 */
  97         while ((readl(keypad->reg_base + SKE_RIS) != 0x00000000) && timeout--)
  98                 cpu_relax();
  99
 100         if (!timeout)
 101                 return -EINVAL;
 102
 103         /*
 104          * set debounce value
 105          * keypad dbounce is configured in DBCR[15:8]
 106          * dbounce value in steps of 32/32.768 ms
 107          */
 108         spin_lock(&keypad->ske_keypad_lock);
 109         value = readl(keypad->reg_base + SKE_DBCR);
 110         value = value & 0xff;
 111         value |= ((keypad->board->debounce_ms * 32000)/32768) << 8;
 112         writel(value, keypad->reg_base + SKE_DBCR);
 113         spin_unlock(&keypad->ske_keypad_lock);
 114
 115         /* enable multi key detection */
 116         ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPMLT);
 117
 118         /*
 119          * set up the number of columns
 120          * KPCN[5:3] defines no. of keypad columns to be auto scanned
 121          */
 122         value = (keypad->board->kcol - 1) << 3;
 123         ske_keypad_set_bits(keypad, SKE_CR, SKE_KPCN, value);
 124
 125         /* clear keypad interrupt for auto(and pending SW) scans */
 126         ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA | SKE_KPICS);
 127
 128         /* un-mask keypad interrupts */
 129         ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
 130
 131         /* enable automatic scan */
 132         ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPASEN);
 133
 134         return 0;
 135 }
 136
 137 static void ske_keypad_read_data(struct ske_keypad *keypad)
 138 {
 139         struct input_dev *input = keypad->input;
 140         u16 status;
 141         int col = 0, row = 0, code;
 142         int ske_asr, ske_ris, key_pressed, i;
 143
 144         /*
 145          * Read the auto scan registers
 146          *
 147          * Each SKE_ASRx (x=0 to x=3) contains two row values.
 148          * lower byte contains row value for column 2*x,
 149          * upper byte contains row value for column 2*x + 1
 150          */
 151         for (i = 0; i < SKE_NUM_ASRX_REGISTERS; i++) {
 152                 ske_asr = readl(keypad->reg_base + SKE_ASR0 + (4 * i));
 153                 if (!ske_asr)
 154                         continue;
 155
 156                 /* now that ASRx is zero, find out the column x and row y*/
 157                 if (ske_asr & 0xff) {
 158                         col = i * 2;
 159                         status = ske_asr & 0xff;
 160                 } else {
 161                         col = (i * 2) + 1;
 162                         status = (ske_asr & 0xff00) >> 8;
 163                 }
 164
 165                 /* find out the row */
 166                 row = __ffs(status);
 167
 168                 code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT);
 169                 ske_ris = readl(keypad->reg_base + SKE_RIS);
 170                 key_pressed = ske_ris & SKE_KPRISA;
 171
 172                 input_event(input, EV_MSC, MSC_SCAN, code);
 173                 input_report_key(input, keypad->keymap[code], key_pressed);
 174                 input_sync(input);
 175         }
 176 }
 177
 178 static irqreturn_t ske_keypad_irq(int irq, void *dev_id)
 179 {
 180         struct ske_keypad *keypad = dev_id;
 181         int retries = 20;
 182
 183         /* disable auto scan interrupt; mask the interrupt generated */
 184         ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0);
 185         ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA);
 186
 187         while ((readl(keypad->reg_base + SKE_CR) & SKE_KPASON) && --retries)
 188                 msleep(5);
 189
 190         if (retries) {
 191                 /* SKEx registers are stable and can be read */
 192                 ske_keypad_read_data(keypad);
 193         }
 194
 195         /* enable auto scan interrupts */
 196         ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
 197
 198         return IRQ_HANDLED;
 199 }
 200
 201 static int __devinit ske_keypad_probe(struct platform_device *pdev)
 202 {
 203         const struct ske_keypad_platform_data *plat = pdev->dev.platform_data;
 204         struct ske_keypad *keypad;
 205         struct input_dev *input;
 206         struct resource *res;
 207         int irq;
 208         int error;
 209
 210         if (!plat) {
 211                 dev_err(&pdev->dev, "invalid keypad platform data\n");
 212                 return -EINVAL;
 213         }
 214
 215         irq = platform_get_irq(pdev, 0);
 216         if (irq < 0) {
 217                 dev_err(&pdev->dev, "failed to get keypad irq\n");
 218                 return -EINVAL;
 219         }
 220
 221         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 222         if (!res) {
 223                 dev_err(&pdev->dev, "missing platform resources\n");
 224                 return -EINVAL;
 225         }
 226
 227         keypad = kzalloc(sizeof(struct ske_keypad), GFP_KERNEL);
 228         input = input_allocate_device();
 229         if (!keypad || !input) {
 230                 dev_err(&pdev->dev, "failed to allocate keypad memory\n");
 231                 error = -ENOMEM;
 232                 goto err_free_mem;
 233         }
 234
 235         keypad->irq = irq;
 236         keypad->board = plat;
 237         keypad->input = input;
 238         spin_lock_init(&keypad->ske_keypad_lock);
 239
 240         if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
 241                 dev_err(&pdev->dev, "failed to request I/O memory\n");
 242                 error = -EBUSY;
 243                 goto err_free_mem;
 244         }
 245
 246         keypad->reg_base = ioremap(res->start, resource_size(res));
 247         if (!keypad->reg_base) {
 248                 dev_err(&pdev->dev, "failed to remap I/O memory\n");
 249                 error = -ENXIO;
 250                 goto err_free_mem_region;
 251         }
 252
 253         keypad->clk = clk_get(&pdev->dev, NULL);
 254         if (IS_ERR(keypad->clk)) {
 255                 dev_err(&pdev->dev, "failed to get clk\n");
 256                 error = PTR_ERR(keypad->clk);
 257                 goto err_iounmap;
 258         }
 259
 260         input->id.bustype = BUS_HOST;
 261         input->name = "ux500-ske-keypad";
 262         input->dev.parent = &pdev->dev;
 263
 264         input->keycode = keypad->keymap;
 265         input->keycodesize = sizeof(keypad->keymap[0]);
 266         input->keycodemax = ARRAY_SIZE(keypad->keymap);
 267
 268         input_set_capability(input, EV_MSC, MSC_SCAN);
 269
 270         __set_bit(EV_KEY, input->evbit);
 271         if (!plat->no_autorepeat)
 272                 __set_bit(EV_REP, input->evbit);
 273
 274         matrix_keypad_build_keymap(plat->keymap_data, SKE_KEYPAD_ROW_SHIFT,
 275                         input->keycode, input->keybit);
 276
 277         clk_enable(keypad->clk);
 278
 279         /* go through board initialization helpers */
 280         if (keypad->board->init)
 281                 keypad->board->init();
 282
 283         error = ske_keypad_chip_init(keypad);
 284         if (error) {
 285                 dev_err(&pdev->dev, "unable to init keypad hardware\n");
 286                 goto err_clk_disable;
 287         }
 288
 289         error = request_threaded_irq(keypad->irq, NULL, ske_keypad_irq,
 290                                      IRQF_ONESHOT, "ske-keypad", keypad);
 291         if (error) {
 292                 dev_err(&pdev->dev, "allocate irq %d failed\n", keypad->irq);
 293                 goto err_clk_disable;
 294         }
 295
 296         error = input_register_device(input);
 297         if (error) {
 298                 dev_err(&pdev->dev,
 299                                 "unable to register input device: %d\n", error);
 300                 goto err_free_irq;
 301         }
 302
 303         if (plat->wakeup_enable)
 304                 device_init_wakeup(&pdev->dev, true);
 305
 306         platform_set_drvdata(pdev, keypad);
 307
 308         return 0;
 309
 310 err_free_irq:
 311         free_irq(keypad->irq, keypad);
 312 err_clk_disable:
 313         clk_disable(keypad->clk);
 314         clk_put(keypad->clk);
 315 err_iounmap:
 316         iounmap(keypad->reg_base);
 317 err_free_mem_region:
 318         release_mem_region(res->start, resource_size(res));
 319 err_free_mem:
 320         input_free_device(input);
 321         kfree(keypad);
 322         return error;
 323 }
 324
 325 static int __devexit ske_keypad_remove(struct platform_device *pdev)
 326 {
 327         struct ske_keypad *keypad = platform_get_drvdata(pdev);
 328         struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 329
 330         free_irq(keypad->irq, keypad);
 331
 332         input_unregister_device(keypad->input);
 333
 334         clk_disable(keypad->clk);
 335         clk_put(keypad->clk);
 336
 337         if (keypad->board->exit)
 338                 keypad->board->exit();
 339
 340         iounmap(keypad->reg_base);
 341         release_mem_region(res->start, resource_size(res));
 342         kfree(keypad);
 343
 344         return 0;
 345 }
 346
 347 #ifdef CONFIG_PM
 348 static int ske_keypad_suspend(struct device *dev)
 349 {
 350         struct platform_device *pdev = to_platform_device(dev);
 351         struct ske_keypad *keypad = platform_get_drvdata(pdev);
 352         int irq = platform_get_irq(pdev, 0);
 353
 354         if (device_may_wakeup(dev))
 355                 enable_irq_wake(irq);
 356         else
 357                 ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0);
 358
 359         return 0;
 360 }
 361
 362 static int ske_keypad_resume(struct device *dev)
 363 {
 364         struct platform_device *pdev = to_platform_device(dev);
 365         struct ske_keypad *keypad = platform_get_drvdata(pdev);
 366         int irq = platform_get_irq(pdev, 0);
 367
 368         if (device_may_wakeup(dev))
 369                 disable_irq_wake(irq);
 370         else
 371                 ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
 372
 373         return 0;
 374 }
 375
 376 static const struct dev_pm_ops ske_keypad_dev_pm_ops = {
 377         .suspend = ske_keypad_suspend,
 378         .resume = ske_keypad_resume,
 379 };
 380 #endif
 381
 382 struct platform_driver ske_keypad_driver = {
 383         .driver = {
 384                 .name = "nmk-ske-keypad",
 385                 .owner  = THIS_MODULE,
 386 #ifdef CONFIG_PM
 387                 .pm = &ske_keypad_dev_pm_ops,
 388 #endif
 389         },
 390         .probe = ske_keypad_probe,
 391         .remove = __devexit_p(ske_keypad_remove),
 392 };
 393
 394 static int __init ske_keypad_init(void)
 395 {
 396         return platform_driver_probe(&ske_keypad_driver, ske_keypad_probe);
 397 }
 398 module_init(ske_keypad_init);
 399
 400 static void __exit ske_keypad_exit(void)
 401 {
 402         platform_driver_unregister(&ske_keypad_driver);
 403 }
 404 module_exit(ske_keypad_exit);
 405
 406 MODULE_LICENSE("GPL v2");
 407 MODULE_AUTHOR("Naveen Kumar <naveen.gaddipati@stericsson.com> / Sundar Iyer <sundar.iyer@stericsson.com>");
 408 MODULE_DESCRIPTION("Nomadik Scroll-Key-Encoder Keypad Driver");
 409 MODULE_ALIAS("platform:nomadik-ske-keypad");