Add linux-next specific files for 20110831
[linux-2.6/next.git] / drivers / media / video / saa711x_regs.h
blob4e5f2eb0a2c12b91ca913d13e15f4395acff772d
1 /* saa711x - Philips SAA711x video decoder register specifications
3 * Copyright (c) 2006 Mauro Carvalho Chehab <mchehab@infradead.org>
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License
7 * as published by the Free Software Foundation; either version 2
8 * of the License, or (at your option) any later version.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
16 #define R_00_CHIP_VERSION 0x00
17 /* Video Decoder */
18 /* Video Decoder - Frontend part */
19 #define R_01_INC_DELAY 0x01
20 #define R_02_INPUT_CNTL_1 0x02
21 #define R_03_INPUT_CNTL_2 0x03
22 #define R_04_INPUT_CNTL_3 0x04
23 #define R_05_INPUT_CNTL_4 0x05
24 /* Video Decoder - Decoder part */
25 #define R_06_H_SYNC_START 0x06
26 #define R_07_H_SYNC_STOP 0x07
27 #define R_08_SYNC_CNTL 0x08
28 #define R_09_LUMA_CNTL 0x09
29 #define R_0A_LUMA_BRIGHT_CNTL 0x0a
30 #define R_0B_LUMA_CONTRAST_CNTL 0x0b
31 #define R_0C_CHROMA_SAT_CNTL 0x0c
32 #define R_0D_CHROMA_HUE_CNTL 0x0d
33 #define R_0E_CHROMA_CNTL_1 0x0e
34 #define R_0F_CHROMA_GAIN_CNTL 0x0f
35 #define R_10_CHROMA_CNTL_2 0x10
36 #define R_11_MODE_DELAY_CNTL 0x11
37 #define R_12_RT_SIGNAL_CNTL 0x12
38 #define R_13_RT_X_PORT_OUT_CNTL 0x13
39 #define R_14_ANAL_ADC_COMPAT_CNTL 0x14
40 #define R_15_VGATE_START_FID_CHG 0x15
41 #define R_16_VGATE_STOP 0x16
42 #define R_17_MISC_VGATE_CONF_AND_MSB 0x17
43 #define R_18_RAW_DATA_GAIN_CNTL 0x18
44 #define R_19_RAW_DATA_OFF_CNTL 0x19
45 #define R_1A_COLOR_KILL_LVL_CNTL 0x1a
46 #define R_1B_MISC_TVVCRDET 0x1b
47 #define R_1C_ENHAN_COMB_CTRL1 0x1c
48 #define R_1D_ENHAN_COMB_CTRL2 0x1d
49 #define R_1E_STATUS_BYTE_1_VD_DEC 0x1e
50 #define R_1F_STATUS_BYTE_2_VD_DEC 0x1f
52 /* Component processing and interrupt masking part */
53 #define R_23_INPUT_CNTL_5 0x23
54 #define R_24_INPUT_CNTL_6 0x24
55 #define R_25_INPUT_CNTL_7 0x25
56 #define R_29_COMP_DELAY 0x29
57 #define R_2A_COMP_BRIGHT_CNTL 0x2a
58 #define R_2B_COMP_CONTRAST_CNTL 0x2b
59 #define R_2C_COMP_SAT_CNTL 0x2c
60 #define R_2D_INTERRUPT_MASK_1 0x2d
61 #define R_2E_INTERRUPT_MASK_2 0x2e
62 #define R_2F_INTERRUPT_MASK_3 0x2f
64 /* Audio clock generator part */
65 #define R_30_AUD_MAST_CLK_CYCLES_PER_FIELD 0x30
66 #define R_34_AUD_MAST_CLK_NOMINAL_INC 0x34
67 #define R_38_CLK_RATIO_AMXCLK_TO_ASCLK 0x38
68 #define R_39_CLK_RATIO_ASCLK_TO_ALRCLK 0x39
69 #define R_3A_AUD_CLK_GEN_BASIC_SETUP 0x3a
71 /* General purpose VBI data slicer part */
72 #define R_40_SLICER_CNTL_1 0x40
73 #define R_41_LCR_BASE 0x41
74 #define R_58_PROGRAM_FRAMING_CODE 0x58
75 #define R_59_H_OFF_FOR_SLICER 0x59
76 #define R_5A_V_OFF_FOR_SLICER 0x5a
77 #define R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF 0x5b
78 #define R_5D_DID 0x5d
79 #define R_5E_SDID 0x5e
80 #define R_60_SLICER_STATUS_BYTE_0 0x60
81 #define R_61_SLICER_STATUS_BYTE_1 0x61
82 #define R_62_SLICER_STATUS_BYTE_2 0x62
84 /* X port, I port and the scaler part */
85 /* Task independent global settings */
86 #define R_80_GLOBAL_CNTL_1 0x80
87 #define R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F 0x81
88 #define R_83_X_PORT_I_O_ENA_AND_OUT_CLK 0x83
89 #define R_84_I_PORT_SIGNAL_DEF 0x84
90 #define R_85_I_PORT_SIGNAL_POLAR 0x85
91 #define R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT 0x86
92 #define R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED 0x87
93 #define R_88_POWER_SAVE_ADC_PORT_CNTL 0x88
94 #define R_8F_STATUS_INFO_SCALER 0x8f
95 /* Task A definition */
96 /* Basic settings and acquisition window definition */
97 #define R_90_A_TASK_HANDLING_CNTL 0x90
98 #define R_91_A_X_PORT_FORMATS_AND_CONF 0x91
99 #define R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL 0x92
100 #define R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF 0x93
101 #define R_94_A_HORIZ_INPUT_WINDOW_START 0x94
102 #define R_95_A_HORIZ_INPUT_WINDOW_START_MSB 0x95
103 #define R_96_A_HORIZ_INPUT_WINDOW_LENGTH 0x96
104 #define R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB 0x97
105 #define R_98_A_VERT_INPUT_WINDOW_START 0x98
106 #define R_99_A_VERT_INPUT_WINDOW_START_MSB 0x99
107 #define R_9A_A_VERT_INPUT_WINDOW_LENGTH 0x9a
108 #define R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB 0x9b
109 #define R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH 0x9c
110 #define R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB 0x9d
111 #define R_9E_A_VERT_OUTPUT_WINDOW_LENGTH 0x9e
112 #define R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB 0x9f
113 /* FIR filtering and prescaling */
114 #define R_A0_A_HORIZ_PRESCALING 0xa0
115 #define R_A1_A_ACCUMULATION_LENGTH 0xa1
116 #define R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER 0xa2
117 #define R_A4_A_LUMA_BRIGHTNESS_CNTL 0xa4
118 #define R_A5_A_LUMA_CONTRAST_CNTL 0xa5
119 #define R_A6_A_CHROMA_SATURATION_CNTL 0xa6
120 /* Horizontal phase scaling */
121 #define R_A8_A_HORIZ_LUMA_SCALING_INC 0xa8
122 #define R_A9_A_HORIZ_LUMA_SCALING_INC_MSB 0xa9
123 #define R_AA_A_HORIZ_LUMA_PHASE_OFF 0xaa
124 #define R_AC_A_HORIZ_CHROMA_SCALING_INC 0xac
125 #define R_AD_A_HORIZ_CHROMA_SCALING_INC_MSB 0xad
126 #define R_AE_A_HORIZ_CHROMA_PHASE_OFF 0xae
127 #define R_AF_A_HORIZ_CHROMA_PHASE_OFF_MSB 0xaf
128 /* Vertical scaling */
129 #define R_B0_A_VERT_LUMA_SCALING_INC 0xb0
130 #define R_B1_A_VERT_LUMA_SCALING_INC_MSB 0xb1
131 #define R_B2_A_VERT_CHROMA_SCALING_INC 0xb2
132 #define R_B3_A_VERT_CHROMA_SCALING_INC_MSB 0xb3
133 #define R_B4_A_VERT_SCALING_MODE_CNTL 0xb4
134 #define R_B8_A_VERT_CHROMA_PHASE_OFF_00 0xb8
135 #define R_B9_A_VERT_CHROMA_PHASE_OFF_01 0xb9
136 #define R_BA_A_VERT_CHROMA_PHASE_OFF_10 0xba
137 #define R_BB_A_VERT_CHROMA_PHASE_OFF_11 0xbb
138 #define R_BC_A_VERT_LUMA_PHASE_OFF_00 0xbc
139 #define R_BD_A_VERT_LUMA_PHASE_OFF_01 0xbd
140 #define R_BE_A_VERT_LUMA_PHASE_OFF_10 0xbe
141 #define R_BF_A_VERT_LUMA_PHASE_OFF_11 0xbf
142 /* Task B definition */
143 /* Basic settings and acquisition window definition */
144 #define R_C0_B_TASK_HANDLING_CNTL 0xc0
145 #define R_C1_B_X_PORT_FORMATS_AND_CONF 0xc1
146 #define R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION 0xc2
147 #define R_C3_B_I_PORT_FORMATS_AND_CONF 0xc3
148 #define R_C4_B_HORIZ_INPUT_WINDOW_START 0xc4
149 #define R_C5_B_HORIZ_INPUT_WINDOW_START_MSB 0xc5
150 #define R_C6_B_HORIZ_INPUT_WINDOW_LENGTH 0xc6
151 #define R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB 0xc7
152 #define R_C8_B_VERT_INPUT_WINDOW_START 0xc8
153 #define R_C9_B_VERT_INPUT_WINDOW_START_MSB 0xc9
154 #define R_CA_B_VERT_INPUT_WINDOW_LENGTH 0xca
155 #define R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB 0xcb
156 #define R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH 0xcc
157 #define R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB 0xcd
158 #define R_CE_B_VERT_OUTPUT_WINDOW_LENGTH 0xce
159 #define R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB 0xcf
160 /* FIR filtering and prescaling */
161 #define R_D0_B_HORIZ_PRESCALING 0xd0
162 #define R_D1_B_ACCUMULATION_LENGTH 0xd1
163 #define R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER 0xd2
164 #define R_D4_B_LUMA_BRIGHTNESS_CNTL 0xd4
165 #define R_D5_B_LUMA_CONTRAST_CNTL 0xd5
166 #define R_D6_B_CHROMA_SATURATION_CNTL 0xd6
167 /* Horizontal phase scaling */
168 #define R_D8_B_HORIZ_LUMA_SCALING_INC 0xd8
169 #define R_D9_B_HORIZ_LUMA_SCALING_INC_MSB 0xd9
170 #define R_DA_B_HORIZ_LUMA_PHASE_OFF 0xda
171 #define R_DC_B_HORIZ_CHROMA_SCALING 0xdc
172 #define R_DD_B_HORIZ_CHROMA_SCALING_MSB 0xdd
173 #define R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA 0xde
174 /* Vertical scaling */
175 #define R_E0_B_VERT_LUMA_SCALING_INC 0xe0
176 #define R_E1_B_VERT_LUMA_SCALING_INC_MSB 0xe1
177 #define R_E2_B_VERT_CHROMA_SCALING_INC 0xe2
178 #define R_E3_B_VERT_CHROMA_SCALING_INC_MSB 0xe3
179 #define R_E4_B_VERT_SCALING_MODE_CNTL 0xe4
180 #define R_E8_B_VERT_CHROMA_PHASE_OFF_00 0xe8
181 #define R_E9_B_VERT_CHROMA_PHASE_OFF_01 0xe9
182 #define R_EA_B_VERT_CHROMA_PHASE_OFF_10 0xea
183 #define R_EB_B_VERT_CHROMA_PHASE_OFF_11 0xeb
184 #define R_EC_B_VERT_LUMA_PHASE_OFF_00 0xec
185 #define R_ED_B_VERT_LUMA_PHASE_OFF_01 0xed
186 #define R_EE_B_VERT_LUMA_PHASE_OFF_10 0xee
187 #define R_EF_B_VERT_LUMA_PHASE_OFF_11 0xef
189 /* second PLL (PLL2) and Pulsegenerator Programming */
190 #define R_F0_LFCO_PER_LINE 0xf0
191 #define R_F1_P_I_PARAM_SELECT 0xf1
192 #define R_F2_NOMINAL_PLL2_DTO 0xf2
193 #define R_F3_PLL_INCREMENT 0xf3
194 #define R_F4_PLL2_STATUS 0xf4
195 #define R_F5_PULSGEN_LINE_LENGTH 0xf5
196 #define R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG 0xf6
197 #define R_F7_PULSE_A_POS_MSB 0xf7
198 #define R_F8_PULSE_B_POS 0xf8
199 #define R_F9_PULSE_B_POS_MSB 0xf9
200 #define R_FA_PULSE_C_POS 0xfa
201 #define R_FB_PULSE_C_POS_MSB 0xfb
202 #define R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES 0xff
204 #if 0
205 /* Those structs will be used in the future for debug purposes */
206 struct saa711x_reg_descr {
207 u8 reg;
208 int count;
209 char *name;
212 struct saa711x_reg_descr saa711x_regs[] = {
213 /* REG COUNT NAME */
214 {R_00_CHIP_VERSION,1,
215 "Chip version"},
217 /* Video Decoder: R_01_INC_DELAY to R_1F_STATUS_BYTE_2_VD_DEC */
219 /* Video Decoder - Frontend part: R_01_INC_DELAY to R_05_INPUT_CNTL_4 */
220 {R_01_INC_DELAY,1,
221 "Increment delay"},
222 {R_02_INPUT_CNTL_1,1,
223 "Analog input control 1"},
224 {R_03_INPUT_CNTL_2,1,
225 "Analog input control 2"},
226 {R_04_INPUT_CNTL_3,1,
227 "Analog input control 3"},
228 {R_05_INPUT_CNTL_4,1,
229 "Analog input control 4"},
231 /* Video Decoder - Decoder part: R_06_H_SYNC_START to R_1F_STATUS_BYTE_2_VD_DEC */
232 {R_06_H_SYNC_START,1,
233 "Horizontal sync start"},
234 {R_07_H_SYNC_STOP,1,
235 "Horizontal sync stop"},
236 {R_08_SYNC_CNTL,1,
237 "Sync control"},
238 {R_09_LUMA_CNTL,1,
239 "Luminance control"},
240 {R_0A_LUMA_BRIGHT_CNTL,1,
241 "Luminance brightness control"},
242 {R_0B_LUMA_CONTRAST_CNTL,1,
243 "Luminance contrast control"},
244 {R_0C_CHROMA_SAT_CNTL,1,
245 "Chrominance saturation control"},
246 {R_0D_CHROMA_HUE_CNTL,1,
247 "Chrominance hue control"},
248 {R_0E_CHROMA_CNTL_1,1,
249 "Chrominance control 1"},
250 {R_0F_CHROMA_GAIN_CNTL,1,
251 "Chrominance gain control"},
252 {R_10_CHROMA_CNTL_2,1,
253 "Chrominance control 2"},
254 {R_11_MODE_DELAY_CNTL,1,
255 "Mode/delay control"},
256 {R_12_RT_SIGNAL_CNTL,1,
257 "RT signal control"},
258 {R_13_RT_X_PORT_OUT_CNTL,1,
259 "RT/X port output control"},
260 {R_14_ANAL_ADC_COMPAT_CNTL,1,
261 "Analog/ADC/compatibility control"},
262 {R_15_VGATE_START_FID_CHG, 1,
263 "VGATE start FID change"},
264 {R_16_VGATE_STOP,1,
265 "VGATE stop"},
266 {R_17_MISC_VGATE_CONF_AND_MSB, 1,
267 "Miscellaneous VGATE configuration and MSBs"},
268 {R_18_RAW_DATA_GAIN_CNTL,1,
269 "Raw data gain control",},
270 {R_19_RAW_DATA_OFF_CNTL,1,
271 "Raw data offset control",},
272 {R_1A_COLOR_KILL_LVL_CNTL,1,
273 "Color Killer Level Control"},
274 { R_1B_MISC_TVVCRDET, 1,
275 "MISC /TVVCRDET"},
276 { R_1C_ENHAN_COMB_CTRL1, 1,
277 "Enhanced comb ctrl1"},
278 { R_1D_ENHAN_COMB_CTRL2, 1,
279 "Enhanced comb ctrl1"},
280 {R_1E_STATUS_BYTE_1_VD_DEC,1,
281 "Status byte 1 video decoder"},
282 {R_1F_STATUS_BYTE_2_VD_DEC,1,
283 "Status byte 2 video decoder"},
285 /* Component processing and interrupt masking part: 0x20h to R_2F_INTERRUPT_MASK_3 */
286 /* 0x20 to 0x22 - Reserved */
287 {R_23_INPUT_CNTL_5,1,
288 "Analog input control 5"},
289 {R_24_INPUT_CNTL_6,1,
290 "Analog input control 6"},
291 {R_25_INPUT_CNTL_7,1,
292 "Analog input control 7"},
293 /* 0x26 to 0x28 - Reserved */
294 {R_29_COMP_DELAY,1,
295 "Component delay"},
296 {R_2A_COMP_BRIGHT_CNTL,1,
297 "Component brightness control"},
298 {R_2B_COMP_CONTRAST_CNTL,1,
299 "Component contrast control"},
300 {R_2C_COMP_SAT_CNTL,1,
301 "Component saturation control"},
302 {R_2D_INTERRUPT_MASK_1,1,
303 "Interrupt mask 1"},
304 {R_2E_INTERRUPT_MASK_2,1,
305 "Interrupt mask 2"},
306 {R_2F_INTERRUPT_MASK_3,1,
307 "Interrupt mask 3"},
309 /* Audio clock generator part: R_30_AUD_MAST_CLK_CYCLES_PER_FIELD to 0x3f */
310 {R_30_AUD_MAST_CLK_CYCLES_PER_FIELD,3,
311 "Audio master clock cycles per field"},
312 /* 0x33 - Reserved */
313 {R_34_AUD_MAST_CLK_NOMINAL_INC,3,
314 "Audio master clock nominal increment"},
315 /* 0x37 - Reserved */
316 {R_38_CLK_RATIO_AMXCLK_TO_ASCLK,1,
317 "Clock ratio AMXCLK to ASCLK"},
318 {R_39_CLK_RATIO_ASCLK_TO_ALRCLK,1,
319 "Clock ratio ASCLK to ALRCLK"},
320 {R_3A_AUD_CLK_GEN_BASIC_SETUP,1,
321 "Audio clock generator basic setup"},
322 /* 0x3b-0x3f - Reserved */
324 /* General purpose VBI data slicer part: R_40_SLICER_CNTL_1 to 0x7f */
325 {R_40_SLICER_CNTL_1,1,
326 "Slicer control 1"},
327 {R_41_LCR,23,
328 "R_41_LCR"},
329 {R_58_PROGRAM_FRAMING_CODE,1,
330 "Programmable framing code"},
331 {R_59_H_OFF_FOR_SLICER,1,
332 "Horizontal offset for slicer"},
333 {R_5A_V_OFF_FOR_SLICER,1,
334 "Vertical offset for slicer"},
335 {R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF,1,
336 "Field offset and MSBs for horizontal and vertical offset"},
337 {R_5D_DID,1,
338 "Header and data identification (R_5D_DID)"},
339 {R_5E_SDID,1,
340 "Sliced data identification (R_5E_SDID) code"},
341 {R_60_SLICER_STATUS_BYTE_0,1,
342 "Slicer status byte 0"},
343 {R_61_SLICER_STATUS_BYTE_1,1,
344 "Slicer status byte 1"},
345 {R_62_SLICER_STATUS_BYTE_2,1,
346 "Slicer status byte 2"},
347 /* 0x63-0x7f - Reserved */
349 /* X port, I port and the scaler part: R_80_GLOBAL_CNTL_1 to R_EF_B_VERT_LUMA_PHASE_OFF_11 */
350 /* Task independent global settings: R_80_GLOBAL_CNTL_1 to R_8F_STATUS_INFO_SCALER */
351 {R_80_GLOBAL_CNTL_1,1,
352 "Global control 1"},
353 {R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F,1,
354 "Vertical sync and Field ID source selection, retimed V and F signals"},
355 /* 0x82 - Reserved */
356 {R_83_X_PORT_I_O_ENA_AND_OUT_CLK,1,
357 "X port I/O enable and output clock"},
358 {R_84_I_PORT_SIGNAL_DEF,1,
359 "I port signal definitions"},
360 {R_85_I_PORT_SIGNAL_POLAR,1,
361 "I port signal polarities"},
362 {R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT,1,
363 "I port FIFO flag control and arbitration"},
364 {R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 1,
365 "I port I/O enable output clock and gated"},
366 {R_88_POWER_SAVE_ADC_PORT_CNTL,1,
367 "Power save/ADC port control"},
368 /* 089-0x8e - Reserved */
369 {R_8F_STATUS_INFO_SCALER,1,
370 "Status information scaler part"},
372 /* Task A definition: R_90_A_TASK_HANDLING_CNTL to R_BF_A_VERT_LUMA_PHASE_OFF_11 */
373 /* Task A: Basic settings and acquisition window definition */
374 {R_90_A_TASK_HANDLING_CNTL,1,
375 "Task A: Task handling control"},
376 {R_91_A_X_PORT_FORMATS_AND_CONF,1,
377 "Task A: X port formats and configuration"},
378 {R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL,1,
379 "Task A: X port input reference signal definition"},
380 {R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF,1,
381 "Task A: I port output formats and configuration"},
382 {R_94_A_HORIZ_INPUT_WINDOW_START,2,
383 "Task A: Horizontal input window start"},
384 {R_96_A_HORIZ_INPUT_WINDOW_LENGTH,2,
385 "Task A: Horizontal input window length"},
386 {R_98_A_VERT_INPUT_WINDOW_START,2,
387 "Task A: Vertical input window start"},
388 {R_9A_A_VERT_INPUT_WINDOW_LENGTH,2,
389 "Task A: Vertical input window length"},
390 {R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH,2,
391 "Task A: Horizontal output window length"},
392 {R_9E_A_VERT_OUTPUT_WINDOW_LENGTH,2,
393 "Task A: Vertical output window length"},
395 /* Task A: FIR filtering and prescaling */
396 {R_A0_A_HORIZ_PRESCALING,1,
397 "Task A: Horizontal prescaling"},
398 {R_A1_A_ACCUMULATION_LENGTH,1,
399 "Task A: Accumulation length"},
400 {R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER,1,
401 "Task A: Prescaler DC gain and FIR prefilter"},
402 /* 0xa3 - Reserved */
403 {R_A4_A_LUMA_BRIGHTNESS_CNTL,1,
404 "Task A: Luminance brightness control"},
405 {R_A5_A_LUMA_CONTRAST_CNTL,1,
406 "Task A: Luminance contrast control"},
407 {R_A6_A_CHROMA_SATURATION_CNTL,1,
408 "Task A: Chrominance saturation control"},
409 /* 0xa7 - Reserved */
411 /* Task A: Horizontal phase scaling */
412 {R_A8_A_HORIZ_LUMA_SCALING_INC,2,
413 "Task A: Horizontal luminance scaling increment"},
414 {R_AA_A_HORIZ_LUMA_PHASE_OFF,1,
415 "Task A: Horizontal luminance phase offset"},
416 /* 0xab - Reserved */
417 {R_AC_A_HORIZ_CHROMA_SCALING_INC,2,
418 "Task A: Horizontal chrominance scaling increment"},
419 {R_AE_A_HORIZ_CHROMA_PHASE_OFF,1,
420 "Task A: Horizontal chrominance phase offset"},
421 /* 0xaf - Reserved */
423 /* Task A: Vertical scaling */
424 {R_B0_A_VERT_LUMA_SCALING_INC,2,
425 "Task A: Vertical luminance scaling increment"},
426 {R_B2_A_VERT_CHROMA_SCALING_INC,2,
427 "Task A: Vertical chrominance scaling increment"},
428 {R_B4_A_VERT_SCALING_MODE_CNTL,1,
429 "Task A: Vertical scaling mode control"},
430 /* 0xb5-0xb7 - Reserved */
431 {R_B8_A_VERT_CHROMA_PHASE_OFF_00,1,
432 "Task A: Vertical chrominance phase offset '00'"},
433 {R_B9_A_VERT_CHROMA_PHASE_OFF_01,1,
434 "Task A: Vertical chrominance phase offset '01'"},
435 {R_BA_A_VERT_CHROMA_PHASE_OFF_10,1,
436 "Task A: Vertical chrominance phase offset '10'"},
437 {R_BB_A_VERT_CHROMA_PHASE_OFF_11,1,
438 "Task A: Vertical chrominance phase offset '11'"},
439 {R_BC_A_VERT_LUMA_PHASE_OFF_00,1,
440 "Task A: Vertical luminance phase offset '00'"},
441 {R_BD_A_VERT_LUMA_PHASE_OFF_01,1,
442 "Task A: Vertical luminance phase offset '01'"},
443 {R_BE_A_VERT_LUMA_PHASE_OFF_10,1,
444 "Task A: Vertical luminance phase offset '10'"},
445 {R_BF_A_VERT_LUMA_PHASE_OFF_11,1,
446 "Task A: Vertical luminance phase offset '11'"},
448 /* Task B definition: R_C0_B_TASK_HANDLING_CNTL to R_EF_B_VERT_LUMA_PHASE_OFF_11 */
449 /* Task B: Basic settings and acquisition window definition */
450 {R_C0_B_TASK_HANDLING_CNTL,1,
451 "Task B: Task handling control"},
452 {R_C1_B_X_PORT_FORMATS_AND_CONF,1,
453 "Task B: X port formats and configuration"},
454 {R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION,1,
455 "Task B: Input reference signal definition"},
456 {R_C3_B_I_PORT_FORMATS_AND_CONF,1,
457 "Task B: I port formats and configuration"},
458 {R_C4_B_HORIZ_INPUT_WINDOW_START,2,
459 "Task B: Horizontal input window start"},
460 {R_C6_B_HORIZ_INPUT_WINDOW_LENGTH,2,
461 "Task B: Horizontal input window length"},
462 {R_C8_B_VERT_INPUT_WINDOW_START,2,
463 "Task B: Vertical input window start"},
464 {R_CA_B_VERT_INPUT_WINDOW_LENGTH,2,
465 "Task B: Vertical input window length"},
466 {R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH,2,
467 "Task B: Horizontal output window length"},
468 {R_CE_B_VERT_OUTPUT_WINDOW_LENGTH,2,
469 "Task B: Vertical output window length"},
471 /* Task B: FIR filtering and prescaling */
472 {R_D0_B_HORIZ_PRESCALING,1,
473 "Task B: Horizontal prescaling"},
474 {R_D1_B_ACCUMULATION_LENGTH,1,
475 "Task B: Accumulation length"},
476 {R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER,1,
477 "Task B: Prescaler DC gain and FIR prefilter"},
478 /* 0xd3 - Reserved */
479 {R_D4_B_LUMA_BRIGHTNESS_CNTL,1,
480 "Task B: Luminance brightness control"},
481 {R_D5_B_LUMA_CONTRAST_CNTL,1,
482 "Task B: Luminance contrast control"},
483 {R_D6_B_CHROMA_SATURATION_CNTL,1,
484 "Task B: Chrominance saturation control"},
485 /* 0xd7 - Reserved */
487 /* Task B: Horizontal phase scaling */
488 {R_D8_B_HORIZ_LUMA_SCALING_INC,2,
489 "Task B: Horizontal luminance scaling increment"},
490 {R_DA_B_HORIZ_LUMA_PHASE_OFF,1,
491 "Task B: Horizontal luminance phase offset"},
492 /* 0xdb - Reserved */
493 {R_DC_B_HORIZ_CHROMA_SCALING,2,
494 "Task B: Horizontal chrominance scaling"},
495 {R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA,1,
496 "Task B: Horizontal Phase Offset Chroma"},
497 /* 0xdf - Reserved */
499 /* Task B: Vertical scaling */
500 {R_E0_B_VERT_LUMA_SCALING_INC,2,
501 "Task B: Vertical luminance scaling increment"},
502 {R_E2_B_VERT_CHROMA_SCALING_INC,2,
503 "Task B: Vertical chrominance scaling increment"},
504 {R_E4_B_VERT_SCALING_MODE_CNTL,1,
505 "Task B: Vertical scaling mode control"},
506 /* 0xe5-0xe7 - Reserved */
507 {R_E8_B_VERT_CHROMA_PHASE_OFF_00,1,
508 "Task B: Vertical chrominance phase offset '00'"},
509 {R_E9_B_VERT_CHROMA_PHASE_OFF_01,1,
510 "Task B: Vertical chrominance phase offset '01'"},
511 {R_EA_B_VERT_CHROMA_PHASE_OFF_10,1,
512 "Task B: Vertical chrominance phase offset '10'"},
513 {R_EB_B_VERT_CHROMA_PHASE_OFF_11,1,
514 "Task B: Vertical chrominance phase offset '11'"},
515 {R_EC_B_VERT_LUMA_PHASE_OFF_00,1,
516 "Task B: Vertical luminance phase offset '00'"},
517 {R_ED_B_VERT_LUMA_PHASE_OFF_01,1,
518 "Task B: Vertical luminance phase offset '01'"},
519 {R_EE_B_VERT_LUMA_PHASE_OFF_10,1,
520 "Task B: Vertical luminance phase offset '10'"},
521 {R_EF_B_VERT_LUMA_PHASE_OFF_11,1,
522 "Task B: Vertical luminance phase offset '11'"},
524 /* second PLL (PLL2) and Pulsegenerator Programming */
525 { R_F0_LFCO_PER_LINE, 1,
526 "LFCO's per line"},
527 { R_F1_P_I_PARAM_SELECT,1,
528 "P-/I- Param. Select., PLL Mode, PLL H-Src., LFCO's per line"},
529 { R_F2_NOMINAL_PLL2_DTO,1,
530 "Nominal PLL2 DTO"},
531 {R_F3_PLL_INCREMENT,1,
532 "PLL2 Increment"},
533 {R_F4_PLL2_STATUS,1,
534 "PLL2 Status"},
535 {R_F5_PULSGEN_LINE_LENGTH,1,
536 "Pulsgen. line length"},
537 {R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG,1,
538 "Pulse A Position, Pulsgen Resync., Pulsgen. H-Src., Pulsgen. line length"},
539 {R_F7_PULSE_A_POS_MSB,1,
540 "Pulse A Position"},
541 {R_F8_PULSE_B_POS,2,
542 "Pulse B Position"},
543 {R_FA_PULSE_C_POS,2,
544 "Pulse C Position"},
545 /* 0xfc to 0xfe - Reserved */
546 {R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES,1,
547 "S_PLL max. phase, error threshold, PLL2 no. of lines, threshold"},
549 #endif