drivers/net/can/sja1000/tscan1.c

   1 /*
   2  * tscan1.c: driver for Technologic Systems TS-CAN1 PC104 boards
   3  *
   4  * Copyright 2010 Andre B. Oliveira
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License
   8  * as published by the Free Software Foundation; either version 2
   9  * of the License, or (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  18  */
  19
  20 /*
  21  * References:
  22  * - Getting started with TS-CAN1, Technologic Systems, Jun 2009
  23  *      http://www.embeddedarm.com/documentation/ts-can1-manual.pdf
  24  */
  25
  26 #include <linux/init.h>
  27 #include <linux/io.h>
  28 #include <linux/ioport.h>
  29 #include <linux/isa.h>
  30 #include <linux/module.h>
  31 #include <linux/netdevice.h>
  32 #include "sja1000.h"
  33
  34 MODULE_DESCRIPTION("Driver for Technologic Systems TS-CAN1 PC104 boards");
  35 MODULE_AUTHOR("Andre B. Oliveira <anbadeol@gmail.com>");
  36 MODULE_LICENSE("GPL");
  37
  38 /* Maximum number of boards (one in each JP1:JP2 setting of IO address) */
  39 #define TSCAN1_MAXDEV 4
  40
  41 /* PLD registers address offsets */
  42 #define TSCAN1_ID1      0
  43 #define TSCAN1_ID2      1
  44 #define TSCAN1_VERSION  2
  45 #define TSCAN1_LED      3
  46 #define TSCAN1_PAGE     4
  47 #define TSCAN1_MODE     5
  48 #define TSCAN1_JUMPERS  6
  49
  50 /* PLD board identifier registers magic values */
  51 #define TSCAN1_ID1_VALUE 0xf6
  52 #define TSCAN1_ID2_VALUE 0xb9
  53
  54 /* PLD mode register SJA1000 IO enable bit */
  55 #define TSCAN1_MODE_ENABLE 0x40
  56
  57 /* PLD jumpers register bits */
  58 #define TSCAN1_JP4 0x10
  59 #define TSCAN1_JP5 0x20
  60
  61 /* PLD IO base addresses start */
  62 #define TSCAN1_PLD_ADDRESS 0x150
  63
  64 /* PLD register space size */
  65 #define TSCAN1_PLD_SIZE 8
  66
  67 /* SJA1000 register space size */
  68 #define TSCAN1_SJA1000_SIZE 32
  69
  70 /* SJA1000 crystal frequency (16MHz) */
  71 #define TSCAN1_SJA1000_XTAL 16000000
  72
  73 /* SJA1000 IO base addresses */
  74 static const unsigned short tscan1_sja1000_addresses[] __devinitconst = {
  75         0x100, 0x120, 0x180, 0x1a0, 0x200, 0x240, 0x280, 0x320
  76 };
  77
  78 /* Read SJA1000 register */
  79 static u8 tscan1_read(const struct sja1000_priv *priv, int reg)
  80 {
  81         return inb((unsigned long)priv->reg_base + reg);
  82 }
  83
  84 /* Write SJA1000 register */
  85 static void tscan1_write(const struct sja1000_priv *priv, int reg, u8 val)
  86 {
  87         outb(val, (unsigned long)priv->reg_base + reg);
  88 }
  89
  90 /* Probe for a TS-CAN1 board with JP2:JP1 jumper setting ID */
  91 static int __devinit tscan1_probe(struct device *dev, unsigned id)
  92 {
  93         struct net_device *netdev;
  94         struct sja1000_priv *priv;
  95         unsigned long pld_base, sja1000_base;
  96         int irq, i;
  97
  98         pld_base = TSCAN1_PLD_ADDRESS + id * TSCAN1_PLD_SIZE;
  99         if (!request_region(pld_base, TSCAN1_PLD_SIZE, dev_name(dev)))
 100                 return -EBUSY;
 101
 102         if (inb(pld_base + TSCAN1_ID1) != TSCAN1_ID1_VALUE ||
 103             inb(pld_base + TSCAN1_ID2) != TSCAN1_ID2_VALUE) {
 104                 release_region(pld_base, TSCAN1_PLD_SIZE);
 105                 return -ENODEV;
 106         }
 107
 108         switch (inb(pld_base + TSCAN1_JUMPERS) & (TSCAN1_JP4 | TSCAN1_JP5)) {
 109         case TSCAN1_JP4:
 110                 irq = 6;
 111                 break;
 112         case TSCAN1_JP5:
 113                 irq = 7;
 114                 break;
 115         case TSCAN1_JP4 | TSCAN1_JP5:
 116                 irq = 5;
 117                 break;
 118         default:
 119                 dev_err(dev, "invalid JP4:JP5 setting (no IRQ)\n");
 120                 release_region(pld_base, TSCAN1_PLD_SIZE);
 121                 return -EINVAL;
 122         }
 123
 124         netdev = alloc_sja1000dev(0);
 125         if (!netdev) {
 126                 release_region(pld_base, TSCAN1_PLD_SIZE);
 127                 return -ENOMEM;
 128         }
 129
 130         dev_set_drvdata(dev, netdev);
 131         SET_NETDEV_DEV(netdev, dev);
 132
 133         netdev->base_addr = pld_base;
 134         netdev->irq = irq;
 135
 136         priv = netdev_priv(netdev);
 137         priv->read_reg = tscan1_read;
 138         priv->write_reg = tscan1_write;
 139         priv->can.clock.freq = TSCAN1_SJA1000_XTAL / 2;
 140         priv->cdr = CDR_CBP | CDR_CLK_OFF;
 141         priv->ocr = OCR_TX0_PUSHPULL;
 142
 143         /* Select the first SJA1000 IO address that is free and that works */
 144         for (i = 0; i < ARRAY_SIZE(tscan1_sja1000_addresses); i++) {
 145                 sja1000_base = tscan1_sja1000_addresses[i];
 146                 if (!request_region(sja1000_base, TSCAN1_SJA1000_SIZE,
 147                                                                 dev_name(dev)))
 148                         continue;
 149
 150                 /* Set SJA1000 IO base address and enable it */
 151                 outb(TSCAN1_MODE_ENABLE | i, pld_base + TSCAN1_MODE);
 152
 153                 priv->reg_base = (void __iomem *)sja1000_base;
 154                 if (!register_sja1000dev(netdev)) {
 155                         /* SJA1000 probe succeeded; turn LED off and return */
 156                         outb(0, pld_base + TSCAN1_LED);
 157                         netdev_info(netdev, "TS-CAN1 at 0x%lx 0x%lx irq %d\n",
 158                                                 pld_base, sja1000_base, irq);
 159                         return 0;
 160                 }
 161
 162                 /* SJA1000 probe failed; release and try next address */
 163                 outb(0, pld_base + TSCAN1_MODE);
 164                 release_region(sja1000_base, TSCAN1_SJA1000_SIZE);
 165         }
 166
 167         dev_err(dev, "failed to assign SJA1000 IO address\n");
 168         dev_set_drvdata(dev, NULL);
 169         free_sja1000dev(netdev);
 170         release_region(pld_base, TSCAN1_PLD_SIZE);
 171         return -ENXIO;
 172 }
 173
 174 static int __devexit tscan1_remove(struct device *dev, unsigned id /*unused*/)
 175 {
 176         struct net_device *netdev;
 177         struct sja1000_priv *priv;
 178         unsigned long pld_base, sja1000_base;
 179
 180         netdev = dev_get_drvdata(dev);
 181         unregister_sja1000dev(netdev);
 182         dev_set_drvdata(dev, NULL);
 183
 184         priv = netdev_priv(netdev);
 185         pld_base = netdev->base_addr;
 186         sja1000_base = (unsigned long)priv->reg_base;
 187
 188         outb(0, pld_base + TSCAN1_MODE);        /* disable SJA1000 IO space */
 189
 190         release_region(sja1000_base, TSCAN1_SJA1000_SIZE);
 191         release_region(pld_base, TSCAN1_PLD_SIZE);
 192
 193         free_sja1000dev(netdev);
 194
 195         return 0;
 196 }
 197
 198 static struct isa_driver tscan1_isa_driver = {
 199         .probe = tscan1_probe,
 200         .remove = __devexit_p(tscan1_remove),
 201         .driver = {
 202                 .name = "tscan1",
 203         },
 204 };
 205
 206 static int __init tscan1_init(void)
 207 {
 208         return isa_register_driver(&tscan1_isa_driver, TSCAN1_MAXDEV);
 209 }
 210 module_init(tscan1_init);
 211
 212 static void __exit tscan1_exit(void)
 213 {
 214         isa_unregister_driver(&tscan1_isa_driver);
 215 }
 216 module_exit(tscan1_exit);