drivers/net/wan/sealevel.c

   1 /*
   2  *      Sealevel Systems 4021 driver.
   3  *
   4  *      This program is free software; you can redistribute it and/or
   5  *      modify it under the terms of the GNU General Public License
   6  *      as published by the Free Software Foundation; either version
   7  *      2 of the License, or (at your option) any later version.
   8  *
   9  *      (c) Copyright 1999, 2001 Alan Cox
  10  *      (c) Copyright 2001 Red Hat Inc.
  11  *      Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <khc@pm.waw.pl>
  12  *
  13  */
  14
  15 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  16
  17 #include <linux/module.h>
  18 #include <linux/kernel.h>
  19 #include <linux/mm.h>
  20 #include <linux/net.h>
  21 #include <linux/skbuff.h>
  22 #include <linux/netdevice.h>
  23 #include <linux/if_arp.h>
  24 #include <linux/delay.h>
  25 #include <linux/hdlc.h>
  26 #include <linux/ioport.h>
  27 #include <linux/init.h>
  28 #include <linux/slab.h>
  29 #include <net/arp.h>
  30
  31 #include <asm/irq.h>
  32 #include <asm/io.h>
  33 #include <asm/dma.h>
  34 #include <asm/byteorder.h>
  35 #include "z85230.h"
  36
  37
  38 struct slvl_device
  39 {
  40         struct z8530_channel *chan;
  41         int channel;
  42 };
  43
  44
  45 struct slvl_board
  46 {
  47         struct slvl_device dev[2];
  48         struct z8530_dev board;
  49         int iobase;
  50 };
  51
  52 /*
  53  *      Network driver support routines
  54  */
  55
  56 static inline struct slvl_device* dev_to_chan(struct net_device *dev)
  57 {
  58         return (struct slvl_device *)dev_to_hdlc(dev)->priv;
  59 }
  60
  61 /*
  62  *      Frame receive. Simple for our card as we do HDLC and there
  63  *      is no funny garbage involved
  64  */
  65
  66 static void sealevel_input(struct z8530_channel *c, struct sk_buff *skb)
  67 {
  68         /* Drop the CRC - it's not a good idea to try and negotiate it ;) */
  69         skb_trim(skb, skb->len - 2);
  70         skb->protocol = hdlc_type_trans(skb, c->netdevice);
  71         skb_reset_mac_header(skb);
  72         skb->dev = c->netdevice;
  73         netif_rx(skb);
  74 }
  75
  76 /*
  77  *      We've been placed in the UP state
  78  */
  79
  80 static int sealevel_open(struct net_device *d)
  81 {
  82         struct slvl_device *slvl = dev_to_chan(d);
  83         int err = -1;
  84         int unit = slvl->channel;
  85
  86         /*
  87          *      Link layer up.
  88          */
  89
  90         switch (unit) {
  91                 case 0:
  92                         err = z8530_sync_dma_open(d, slvl->chan);
  93                         break;
  94                 case 1:
  95                         err = z8530_sync_open(d, slvl->chan);
  96                         break;
  97         }
  98
  99         if (err)
 100                 return err;
 101
 102         err = hdlc_open(d);
 103         if (err) {
 104                 switch (unit) {
 105                         case 0:
 106                                 z8530_sync_dma_close(d, slvl->chan);
 107                                 break;
 108                         case 1:
 109                                 z8530_sync_close(d, slvl->chan);
 110                                 break;
 111                 }
 112                 return err;
 113         }
 114
 115         slvl->chan->rx_function = sealevel_input;
 116
 117         /*
 118          *      Go go go
 119          */
 120         netif_start_queue(d);
 121         return 0;
 122 }
 123
 124 static int sealevel_close(struct net_device *d)
 125 {
 126         struct slvl_device *slvl = dev_to_chan(d);
 127         int unit = slvl->channel;
 128
 129         /*
 130          *      Discard new frames
 131          */
 132
 133         slvl->chan->rx_function = z8530_null_rx;
 134
 135         hdlc_close(d);
 136         netif_stop_queue(d);
 137
 138         switch (unit) {
 139                 case 0:
 140                         z8530_sync_dma_close(d, slvl->chan);
 141                         break;
 142                 case 1:
 143                         z8530_sync_close(d, slvl->chan);
 144                         break;
 145         }
 146         return 0;
 147 }
 148
 149 static int sealevel_ioctl(struct net_device *d, struct ifreq *ifr, int cmd)
 150 {
 151         /* struct slvl_device *slvl=dev_to_chan(d);
 152            z8530_ioctl(d,&slvl->sync.chanA,ifr,cmd) */
 153         return hdlc_ioctl(d, ifr, cmd);
 154 }
 155
 156 /*
 157  *      Passed network frames, fire them downwind.
 158  */
 159
 160 static netdev_tx_t sealevel_queue_xmit(struct sk_buff *skb,
 161                                              struct net_device *d)
 162 {
 163         return z8530_queue_xmit(dev_to_chan(d)->chan, skb);
 164 }
 165
 166 static int sealevel_attach(struct net_device *dev, unsigned short encoding,
 167                            unsigned short parity)
 168 {
 169         if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT)
 170                 return 0;
 171         return -EINVAL;
 172 }
 173
 174 static const struct net_device_ops sealevel_ops = {
 175         .ndo_open       = sealevel_open,
 176         .ndo_stop       = sealevel_close,
 177         .ndo_change_mtu = hdlc_change_mtu,
 178         .ndo_start_xmit = hdlc_start_xmit,
 179         .ndo_do_ioctl   = sealevel_ioctl,
 180 };
 181
 182 static int slvl_setup(struct slvl_device *sv, int iobase, int irq)
 183 {
 184         struct net_device *dev = alloc_hdlcdev(sv);
 185         if (!dev)
 186                 return -1;
 187
 188         dev_to_hdlc(dev)->attach = sealevel_attach;
 189         dev_to_hdlc(dev)->xmit = sealevel_queue_xmit;
 190         dev->netdev_ops = &sealevel_ops;
 191         dev->base_addr = iobase;
 192         dev->irq = irq;
 193
 194         if (register_hdlc_device(dev)) {
 195                 pr_err("unable to register HDLC device\n");
 196                 free_netdev(dev);
 197                 return -1;
 198         }
 199
 200         sv->chan->netdevice = dev;
 201         return 0;
 202 }
 203
 204
 205 /*
 206  *      Allocate and setup Sealevel board.
 207  */
 208
 209 static __init struct slvl_board *slvl_init(int iobase, int irq,
 210                                            int txdma, int rxdma, int slow)
 211 {
 212         struct z8530_dev *dev;
 213         struct slvl_board *b;
 214
 215         /*
 216          *      Get the needed I/O space
 217          */
 218
 219         if (!request_region(iobase, 8, "Sealevel 4021")) {
 220                 pr_warn("I/O 0x%X already in use\n", iobase);
 221                 return NULL;
 222         }
 223
 224         b = kzalloc(sizeof(struct slvl_board), GFP_KERNEL);
 225         if (!b)
 226                 goto err_kzalloc;
 227
 228         b->dev[0].chan = &b->board.chanA;
 229         b->dev[0].channel = 0;
 230
 231         b->dev[1].chan = &b->board.chanB;
 232         b->dev[1].channel = 1;
 233
 234         dev = &b->board;
 235
 236         /*
 237          *      Stuff in the I/O addressing
 238          */
 239
 240         dev->active = 0;
 241
 242         b->iobase = iobase;
 243
 244         /*
 245          *      Select 8530 delays for the old board
 246          */
 247
 248         if (slow)
 249                 iobase |= Z8530_PORT_SLEEP;
 250
 251         dev->chanA.ctrlio = iobase + 1;
 252         dev->chanA.dataio = iobase;
 253         dev->chanB.ctrlio = iobase + 3;
 254         dev->chanB.dataio = iobase + 2;
 255
 256         dev->chanA.irqs = &z8530_nop;
 257         dev->chanB.irqs = &z8530_nop;
 258
 259         /*
 260          *      Assert DTR enable DMA
 261          */
 262
 263         outb(3 | (1 << 7), b->iobase + 4);
 264
 265
 266         /* We want a fast IRQ for this device. Actually we'd like an even faster
 267            IRQ ;) - This is one driver RtLinux is made for */
 268
 269         if (request_irq(irq, z8530_interrupt, IRQF_DISABLED,
 270                         "SeaLevel", dev) < 0) {
 271                 pr_warn("IRQ %d already in use\n", irq);
 272                 goto err_request_irq;
 273         }
 274
 275         dev->irq = irq;
 276         dev->chanA.private = &b->dev[0];
 277         dev->chanB.private = &b->dev[1];
 278         dev->chanA.dev = dev;
 279         dev->chanB.dev = dev;
 280
 281         dev->chanA.txdma = 3;
 282         dev->chanA.rxdma = 1;
 283         if (request_dma(dev->chanA.txdma, "SeaLevel (TX)"))
 284                 goto err_dma_tx;
 285
 286         if (request_dma(dev->chanA.rxdma, "SeaLevel (RX)"))
 287                 goto err_dma_rx;
 288
 289         disable_irq(irq);
 290
 291         /*
 292          *      Begin normal initialise
 293          */
 294
 295         if (z8530_init(dev) != 0) {
 296                 pr_err("Z8530 series device not found\n");
 297                 enable_irq(irq);
 298                 goto free_hw;
 299         }
 300         if (dev->type == Z85C30) {
 301                 z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream);
 302                 z8530_channel_load(&dev->chanB, z8530_hdlc_kilostream);
 303         } else {
 304                 z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream_85230);
 305                 z8530_channel_load(&dev->chanB, z8530_hdlc_kilostream_85230);
 306         }
 307
 308         /*
 309          *      Now we can take the IRQ
 310          */
 311
 312         enable_irq(irq);
 313
 314         if (slvl_setup(&b->dev[0], iobase, irq))
 315                 goto free_hw;
 316         if (slvl_setup(&b->dev[1], iobase, irq))
 317                 goto free_netdev0;
 318
 319         z8530_describe(dev, "I/O", iobase);
 320         dev->active = 1;
 321         return b;
 322
 323 free_netdev0:
 324         unregister_hdlc_device(b->dev[0].chan->netdevice);
 325         free_netdev(b->dev[0].chan->netdevice);
 326 free_hw:
 327         free_dma(dev->chanA.rxdma);
 328 err_dma_rx:
 329         free_dma(dev->chanA.txdma);
 330 err_dma_tx:
 331         free_irq(irq, dev);
 332 err_request_irq:
 333         kfree(b);
 334 err_kzalloc:
 335         release_region(iobase, 8);
 336         return NULL;
 337 }
 338
 339 static void __exit slvl_shutdown(struct slvl_board *b)
 340 {
 341         int u;
 342
 343         z8530_shutdown(&b->board);
 344
 345         for (u = 0; u < 2; u++) {
 346                 struct net_device *d = b->dev[u].chan->netdevice;
 347                 unregister_hdlc_device(d);
 348                 free_netdev(d);
 349         }
 350
 351         free_irq(b->board.irq, &b->board);
 352         free_dma(b->board.chanA.rxdma);
 353         free_dma(b->board.chanA.txdma);
 354         /* DMA off on the card, drop DTR */
 355         outb(0, b->iobase);
 356         release_region(b->iobase, 8);
 357         kfree(b);
 358 }
 359
 360
 361 static int io=0x238;
 362 static int txdma=1;
 363 static int rxdma=3;
 364 static int irq=5;
 365 static int slow=0;
 366
 367 module_param(io, int, 0);
 368 MODULE_PARM_DESC(io, "The I/O base of the Sealevel card");
 369 module_param(txdma, int, 0);
 370 MODULE_PARM_DESC(txdma, "Transmit DMA channel");
 371 module_param(rxdma, int, 0);
 372 MODULE_PARM_DESC(rxdma, "Receive DMA channel");
 373 module_param(irq, int, 0);
 374 MODULE_PARM_DESC(irq, "The interrupt line setting for the SeaLevel card");
 375 module_param(slow, bool, 0);
 376 MODULE_PARM_DESC(slow, "Set this for an older Sealevel card such as the 4012");
 377
 378 MODULE_AUTHOR("Alan Cox");
 379 MODULE_LICENSE("GPL");
 380 MODULE_DESCRIPTION("Modular driver for the SeaLevel 4021");
 381
 382 static struct slvl_board *slvl_unit;
 383
 384 static int __init slvl_init_module(void)
 385 {
 386         slvl_unit = slvl_init(io, irq, txdma, rxdma, slow);
 387
 388         return slvl_unit ? 0 : -ENODEV;
 389 }
 390
 391 static void __exit slvl_cleanup_module(void)
 392 {
 393         if (slvl_unit)
 394                 slvl_shutdown(slvl_unit);
 395 }
 396
 397 module_init(slvl_init_module);
 398 module_exit(slvl_cleanup_module);