1 /******************************************************************************
3 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
21 * Contact Information:
22 * Intel Linux Wireless <ilw@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 *****************************************************************************/
26 #include <linux/kernel.h>
27 #include <linux/init.h>
28 #include <linux/skbuff.h>
29 #include <linux/slab.h>
30 #include <net/mac80211.h>
32 #include <linux/netdevice.h>
33 #include <linux/etherdevice.h>
34 #include <linux/delay.h>
36 #include <linux/workqueue.h>
43 #define RS_NAME "iwl-agn-rs"
45 #define NUM_TRY_BEFORE_ANT_TOGGLE 1
46 #define IWL_NUMBER_TRY 1
47 #define IWL_HT_NUMBER_TRY 3
49 #define IWL_RATE_MAX_WINDOW 62 /* # tx in history window */
50 #define IWL_RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */
51 #define IWL_RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */
53 /* max allowed rate miss before sync LQ cmd */
54 #define IWL_MISSED_RATE_MAX 15
55 /* max time to accum history 2 seconds */
56 #define IWL_RATE_SCALE_FLUSH_INTVL (3*HZ)
58 static u8 rs_ht_to_legacy
[] = {
59 IWL_RATE_6M_INDEX
, IWL_RATE_6M_INDEX
,
60 IWL_RATE_6M_INDEX
, IWL_RATE_6M_INDEX
,
62 IWL_RATE_6M_INDEX
, IWL_RATE_9M_INDEX
,
63 IWL_RATE_12M_INDEX
, IWL_RATE_18M_INDEX
,
64 IWL_RATE_24M_INDEX
, IWL_RATE_36M_INDEX
,
65 IWL_RATE_48M_INDEX
, IWL_RATE_54M_INDEX
68 static const u8 ant_toggle_lookup
[] = {
69 /*ANT_NONE -> */ ANT_NONE
,
72 /*ANT_AB -> */ ANT_BC
,
74 /*ANT_AC -> */ ANT_AB
,
75 /*ANT_BC -> */ ANT_AC
,
76 /*ANT_ABC -> */ ANT_ABC
,
79 #define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \
80 [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \
81 IWL_RATE_SISO_##s##M_PLCP, \
82 IWL_RATE_MIMO2_##s##M_PLCP,\
83 IWL_RATE_MIMO3_##s##M_PLCP,\
84 IWL_RATE_##r##M_IEEE, \
85 IWL_RATE_##ip##M_INDEX, \
86 IWL_RATE_##in##M_INDEX, \
87 IWL_RATE_##rp##M_INDEX, \
88 IWL_RATE_##rn##M_INDEX, \
89 IWL_RATE_##pp##M_INDEX, \
90 IWL_RATE_##np##M_INDEX }
94 * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
96 * If there isn't a valid next or previous rate then INV is used which
97 * maps to IWL_RATE_INVALID
100 const struct iwl_rate_info iwl_rates
[IWL_RATE_COUNT
] = {
101 IWL_DECLARE_RATE_INFO(1, INV
, INV
, 2, INV
, 2, INV
, 2), /* 1mbps */
102 IWL_DECLARE_RATE_INFO(2, INV
, 1, 5, 1, 5, 1, 5), /* 2mbps */
103 IWL_DECLARE_RATE_INFO(5, INV
, 2, 6, 2, 11, 2, 11), /*5.5mbps */
104 IWL_DECLARE_RATE_INFO(11, INV
, 9, 12, 9, 12, 5, 18), /* 11mbps */
105 IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */
106 IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */
107 IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */
108 IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */
109 IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */
110 IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */
111 IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */
112 IWL_DECLARE_RATE_INFO(54, 54, 48, INV
, 48, INV
, 48, INV
),/* 54mbps */
113 IWL_DECLARE_RATE_INFO(60, 60, 48, INV
, 48, INV
, 48, INV
),/* 60mbps */
114 /* FIXME:RS: ^^ should be INV (legacy) */
117 static inline u8
rs_extract_rate(u32 rate_n_flags
)
119 return (u8
)(rate_n_flags
& RATE_MCS_RATE_MSK
);
122 static int iwl_hwrate_to_plcp_idx(u32 rate_n_flags
)
127 if (rate_n_flags
& RATE_MCS_HT_MSK
) {
128 idx
= rs_extract_rate(rate_n_flags
);
130 if (idx
>= IWL_RATE_MIMO3_6M_PLCP
)
131 idx
= idx
- IWL_RATE_MIMO3_6M_PLCP
;
132 else if (idx
>= IWL_RATE_MIMO2_6M_PLCP
)
133 idx
= idx
- IWL_RATE_MIMO2_6M_PLCP
;
135 idx
+= IWL_FIRST_OFDM_RATE
;
136 /* skip 9M not supported in ht*/
137 if (idx
>= IWL_RATE_9M_INDEX
)
139 if ((idx
>= IWL_FIRST_OFDM_RATE
) && (idx
<= IWL_LAST_OFDM_RATE
))
142 /* legacy rate format, search for match in table */
144 for (idx
= 0; idx
< ARRAY_SIZE(iwl_rates
); idx
++)
145 if (iwl_rates
[idx
].plcp
==
146 rs_extract_rate(rate_n_flags
))
153 static void rs_rate_scale_perform(struct iwl_priv
*priv
,
155 struct ieee80211_sta
*sta
,
156 struct iwl_lq_sta
*lq_sta
);
157 static void rs_fill_link_cmd(struct iwl_priv
*priv
,
158 struct iwl_lq_sta
*lq_sta
, u32 rate_n_flags
);
159 static void rs_stay_in_table(struct iwl_lq_sta
*lq_sta
, bool force_search
);
162 #ifdef CONFIG_MAC80211_DEBUGFS
163 static void rs_dbgfs_set_mcs(struct iwl_lq_sta
*lq_sta
,
164 u32
*rate_n_flags
, int index
);
166 static void rs_dbgfs_set_mcs(struct iwl_lq_sta
*lq_sta
,
167 u32
*rate_n_flags
, int index
)
172 * The following tables contain the expected throughput metrics for all rates
174 * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits
176 * where invalid entries are zeros.
178 * CCK rates are only valid in legacy table and will only be used in G
182 static s32 expected_tpt_legacy
[IWL_RATE_COUNT
] = {
183 7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 0
186 static s32 expected_tpt_siso20MHz
[4][IWL_RATE_COUNT
] = {
187 {0, 0, 0, 0, 42, 0, 76, 102, 124, 159, 183, 193, 202}, /* Norm */
188 {0, 0, 0, 0, 46, 0, 82, 110, 132, 168, 192, 202, 210}, /* SGI */
189 {0, 0, 0, 0, 47, 0, 91, 133, 171, 242, 305, 334, 362}, /* AGG */
190 {0, 0, 0, 0, 52, 0, 101, 145, 187, 264, 330, 361, 390}, /* AGG+SGI */
193 static s32 expected_tpt_siso40MHz
[4][IWL_RATE_COUNT
] = {
194 {0, 0, 0, 0, 77, 0, 127, 160, 184, 220, 242, 250, 257}, /* Norm */
195 {0, 0, 0, 0, 83, 0, 135, 169, 193, 229, 250, 257, 264}, /* SGI */
196 {0, 0, 0, 0, 94, 0, 177, 249, 313, 423, 512, 550, 586}, /* AGG */
197 {0, 0, 0, 0, 104, 0, 193, 270, 338, 454, 545, 584, 620}, /* AGG+SGI */
200 static s32 expected_tpt_mimo2_20MHz
[4][IWL_RATE_COUNT
] = {
201 {0, 0, 0, 0, 74, 0, 123, 155, 179, 214, 236, 244, 251}, /* Norm */
202 {0, 0, 0, 0, 81, 0, 131, 164, 188, 223, 243, 251, 257}, /* SGI */
203 {0, 0, 0, 0, 89, 0, 167, 235, 296, 402, 488, 526, 560}, /* AGG */
204 {0, 0, 0, 0, 97, 0, 182, 255, 320, 431, 520, 558, 593}, /* AGG+SGI*/
207 static s32 expected_tpt_mimo2_40MHz
[4][IWL_RATE_COUNT
] = {
208 {0, 0, 0, 0, 123, 0, 182, 214, 235, 264, 279, 285, 289}, /* Norm */
209 {0, 0, 0, 0, 131, 0, 191, 222, 242, 270, 284, 289, 293}, /* SGI */
210 {0, 0, 0, 0, 171, 0, 305, 410, 496, 634, 731, 771, 805}, /* AGG */
211 {0, 0, 0, 0, 186, 0, 329, 439, 527, 667, 764, 803, 838}, /* AGG+SGI */
214 static s32 expected_tpt_mimo3_20MHz
[4][IWL_RATE_COUNT
] = {
215 {0, 0, 0, 0, 99, 0, 153, 186, 208, 239, 256, 263, 268}, /* Norm */
216 {0, 0, 0, 0, 106, 0, 162, 194, 215, 246, 262, 268, 273}, /* SGI */
217 {0, 0, 0, 0, 134, 0, 249, 346, 431, 574, 685, 732, 775}, /* AGG */
218 {0, 0, 0, 0, 148, 0, 272, 376, 465, 614, 727, 775, 818}, /* AGG+SGI */
221 static s32 expected_tpt_mimo3_40MHz
[4][IWL_RATE_COUNT
] = {
222 {0, 0, 0, 0, 152, 0, 211, 239, 255, 279, 290, 294, 297}, /* Norm */
223 {0, 0, 0, 0, 160, 0, 219, 245, 261, 284, 294, 297, 300}, /* SGI */
224 {0, 0, 0, 0, 254, 0, 443, 584, 695, 868, 984, 1030, 1070}, /* AGG */
225 {0, 0, 0, 0, 277, 0, 478, 624, 737, 911, 1026, 1070, 1109}, /* AGG+SGI */
229 static const struct iwl_rate_mcs_info iwl_rate_mcs
[IWL_RATE_COUNT
] = {
238 { "24", "16QAM 1/2"},
239 { "36", "16QAM 3/4"},
240 { "48", "64QAM 2/3"},
241 { "54", "64QAM 3/4"},
242 { "60", "64QAM 5/6"},
245 #define MCS_INDEX_PER_STREAM (8)
247 static void rs_rate_scale_clear_window(struct iwl_rate_scale_data
*window
)
250 window
->success_counter
= 0;
251 window
->success_ratio
= IWL_INVALID_VALUE
;
253 window
->average_tpt
= IWL_INVALID_VALUE
;
257 static inline u8
rs_is_valid_ant(u8 valid_antenna
, u8 ant_type
)
259 return (ant_type
& valid_antenna
) == ant_type
;
263 * removes the old data from the statistics. All data that is older than
264 * TID_MAX_TIME_DIFF, will be deleted.
266 static void rs_tl_rm_old_stats(struct iwl_traffic_load
*tl
, u32 curr_time
)
268 /* The oldest age we want to keep */
269 u32 oldest_time
= curr_time
- TID_MAX_TIME_DIFF
;
271 while (tl
->queue_count
&&
272 (tl
->time_stamp
< oldest_time
)) {
273 tl
->total
-= tl
->packet_count
[tl
->head
];
274 tl
->packet_count
[tl
->head
] = 0;
275 tl
->time_stamp
+= TID_QUEUE_CELL_SPACING
;
278 if (tl
->head
>= TID_QUEUE_MAX_SIZE
)
284 * increment traffic load value for tid and also remove
285 * any old values if passed the certain time period
287 static u8
rs_tl_add_packet(struct iwl_lq_sta
*lq_data
,
288 struct ieee80211_hdr
*hdr
)
290 u32 curr_time
= jiffies_to_msecs(jiffies
);
293 struct iwl_traffic_load
*tl
= NULL
;
296 if (ieee80211_is_data_qos(hdr
->frame_control
)) {
297 u8
*qc
= ieee80211_get_qos_ctl(hdr
);
300 return IWL_MAX_TID_COUNT
;
302 if (unlikely(tid
>= TID_MAX_LOAD_COUNT
))
303 return IWL_MAX_TID_COUNT
;
305 tl
= &lq_data
->load
[tid
];
307 curr_time
-= curr_time
% TID_ROUND_VALUE
;
309 /* Happens only for the first packet. Initialize the data */
310 if (!(tl
->queue_count
)) {
312 tl
->time_stamp
= curr_time
;
315 tl
->packet_count
[0] = 1;
316 return IWL_MAX_TID_COUNT
;
319 time_diff
= TIME_WRAP_AROUND(tl
->time_stamp
, curr_time
);
320 index
= time_diff
/ TID_QUEUE_CELL_SPACING
;
322 /* The history is too long: remove data that is older than */
323 /* TID_MAX_TIME_DIFF */
324 if (index
>= TID_QUEUE_MAX_SIZE
)
325 rs_tl_rm_old_stats(tl
, curr_time
);
327 index
= (tl
->head
+ index
) % TID_QUEUE_MAX_SIZE
;
328 tl
->packet_count
[index
] = tl
->packet_count
[index
] + 1;
329 tl
->total
= tl
->total
+ 1;
331 if ((index
+ 1) > tl
->queue_count
)
332 tl
->queue_count
= index
+ 1;
337 #ifdef CONFIG_MAC80211_DEBUGFS
339 * Program the device to use fixed rate for frame transmit
340 * This is for debugging/testing only
341 * once the device start use fixed rate, we need to reload the module
342 * to being back the normal operation.
344 static void rs_program_fix_rate(struct iwl_priv
*priv
,
345 struct iwl_lq_sta
*lq_sta
)
347 struct iwl_station_priv
*sta_priv
=
348 container_of(lq_sta
, struct iwl_station_priv
, lq_sta
);
349 struct iwl_rxon_context
*ctx
= sta_priv
->common
.ctx
;
351 lq_sta
->active_legacy_rate
= 0x0FFF; /* 1 - 54 MBits, includes CCK */
352 lq_sta
->active_siso_rate
= 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
353 lq_sta
->active_mimo2_rate
= 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
354 lq_sta
->active_mimo3_rate
= 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
356 #ifdef CONFIG_IWLWIFI_DEVICE_SVTOOL
357 /* testmode has higher priority to overwirte the fixed rate */
358 if (priv
->tm_fixed_rate
)
359 lq_sta
->dbg_fixed_rate
= priv
->tm_fixed_rate
;
362 IWL_DEBUG_RATE(priv
, "sta_id %d rate 0x%X\n",
363 lq_sta
->lq
.sta_id
, lq_sta
->dbg_fixed_rate
);
365 if (lq_sta
->dbg_fixed_rate
) {
366 rs_fill_link_cmd(NULL
, lq_sta
, lq_sta
->dbg_fixed_rate
);
367 iwl_send_lq_cmd(lq_sta
->drv
, ctx
, &lq_sta
->lq
, CMD_ASYNC
,
374 get the traffic load value for tid
376 static u32
rs_tl_get_load(struct iwl_lq_sta
*lq_data
, u8 tid
)
378 u32 curr_time
= jiffies_to_msecs(jiffies
);
381 struct iwl_traffic_load
*tl
= NULL
;
383 if (tid
>= TID_MAX_LOAD_COUNT
)
386 tl
= &(lq_data
->load
[tid
]);
388 curr_time
-= curr_time
% TID_ROUND_VALUE
;
390 if (!(tl
->queue_count
))
393 time_diff
= TIME_WRAP_AROUND(tl
->time_stamp
, curr_time
);
394 index
= time_diff
/ TID_QUEUE_CELL_SPACING
;
396 /* The history is too long: remove data that is older than */
397 /* TID_MAX_TIME_DIFF */
398 if (index
>= TID_QUEUE_MAX_SIZE
)
399 rs_tl_rm_old_stats(tl
, curr_time
);
404 static int rs_tl_turn_on_agg_for_tid(struct iwl_priv
*priv
,
405 struct iwl_lq_sta
*lq_data
, u8 tid
,
406 struct ieee80211_sta
*sta
)
412 * Don't create TX aggregation sessions when in high
413 * BT traffic, as they would just be disrupted by BT.
415 if (priv
->bt_traffic_load
>= IWL_BT_COEX_TRAFFIC_LOAD_HIGH
) {
416 IWL_ERR(priv
, "BT traffic (%d), no aggregation allowed\n",
417 priv
->bt_traffic_load
);
421 load
= rs_tl_get_load(lq_data
, tid
);
423 if ((iwlagn_mod_params
.auto_agg
) || (load
> IWL_AGG_LOAD_THRESHOLD
)) {
424 IWL_DEBUG_HT(priv
, "Starting Tx agg: STA: %pM tid: %d\n",
426 ret
= ieee80211_start_tx_ba_session(sta
, tid
, 5000);
427 if (ret
== -EAGAIN
) {
429 * driver and mac80211 is out of sync
430 * this might be cause by reloading firmware
431 * stop the tx ba session here
433 IWL_ERR(priv
, "Fail start Tx agg on tid: %d\n",
435 ieee80211_stop_tx_ba_session(sta
, tid
);
438 IWL_DEBUG_HT(priv
, "Aggregation not enabled for tid %d "
439 "because load = %u\n", tid
, load
);
444 static void rs_tl_turn_on_agg(struct iwl_priv
*priv
, u8 tid
,
445 struct iwl_lq_sta
*lq_data
,
446 struct ieee80211_sta
*sta
)
448 if (tid
< TID_MAX_LOAD_COUNT
)
449 rs_tl_turn_on_agg_for_tid(priv
, lq_data
, tid
, sta
);
451 IWL_ERR(priv
, "tid exceeds max load count: %d/%d\n",
452 tid
, TID_MAX_LOAD_COUNT
);
455 static inline int get_num_of_ant_from_rate(u32 rate_n_flags
)
457 return !!(rate_n_flags
& RATE_MCS_ANT_A_MSK
) +
458 !!(rate_n_flags
& RATE_MCS_ANT_B_MSK
) +
459 !!(rate_n_flags
& RATE_MCS_ANT_C_MSK
);
463 * Static function to get the expected throughput from an iwl_scale_tbl_info
464 * that wraps a NULL pointer check
466 static s32
get_expected_tpt(struct iwl_scale_tbl_info
*tbl
, int rs_index
)
468 if (tbl
->expected_tpt
)
469 return tbl
->expected_tpt
[rs_index
];
474 * rs_collect_tx_data - Update the success/failure sliding window
476 * We keep a sliding window of the last 62 packets transmitted
477 * at this rate. window->data contains the bitmask of successful
480 static int rs_collect_tx_data(struct iwl_scale_tbl_info
*tbl
,
481 int scale_index
, int attempts
, int successes
)
483 struct iwl_rate_scale_data
*window
= NULL
;
484 static const u64 mask
= (((u64
)1) << (IWL_RATE_MAX_WINDOW
- 1));
487 if (scale_index
< 0 || scale_index
>= IWL_RATE_COUNT
)
490 /* Select window for current tx bit rate */
491 window
= &(tbl
->win
[scale_index
]);
493 /* Get expected throughput */
494 tpt
= get_expected_tpt(tbl
, scale_index
);
497 * Keep track of only the latest 62 tx frame attempts in this rate's
498 * history window; anything older isn't really relevant any more.
499 * If we have filled up the sliding window, drop the oldest attempt;
500 * if the oldest attempt (highest bit in bitmap) shows "success",
501 * subtract "1" from the success counter (this is the main reason
502 * we keep these bitmaps!).
504 while (attempts
> 0) {
505 if (window
->counter
>= IWL_RATE_MAX_WINDOW
) {
507 /* remove earliest */
508 window
->counter
= IWL_RATE_MAX_WINDOW
- 1;
510 if (window
->data
& mask
) {
511 window
->data
&= ~mask
;
512 window
->success_counter
--;
516 /* Increment frames-attempted counter */
519 /* Shift bitmap by one frame to throw away oldest history */
522 /* Mark the most recent #successes attempts as successful */
524 window
->success_counter
++;
532 /* Calculate current success ratio, avoid divide-by-0! */
533 if (window
->counter
> 0)
534 window
->success_ratio
= 128 * (100 * window
->success_counter
)
537 window
->success_ratio
= IWL_INVALID_VALUE
;
539 fail_count
= window
->counter
- window
->success_counter
;
541 /* Calculate average throughput, if we have enough history. */
542 if ((fail_count
>= IWL_RATE_MIN_FAILURE_TH
) ||
543 (window
->success_counter
>= IWL_RATE_MIN_SUCCESS_TH
))
544 window
->average_tpt
= (window
->success_ratio
* tpt
+ 64) / 128;
546 window
->average_tpt
= IWL_INVALID_VALUE
;
548 /* Tag this window as having been updated */
549 window
->stamp
= jiffies
;
555 * Fill uCode API rate_n_flags field, based on "search" or "active" table.
557 /* FIXME:RS:remove this function and put the flags statically in the table */
558 static u32
rate_n_flags_from_tbl(struct iwl_priv
*priv
,
559 struct iwl_scale_tbl_info
*tbl
,
560 int index
, u8 use_green
)
562 u32 rate_n_flags
= 0;
564 if (is_legacy(tbl
->lq_type
)) {
565 rate_n_flags
= iwl_rates
[index
].plcp
;
566 if (index
>= IWL_FIRST_CCK_RATE
&& index
<= IWL_LAST_CCK_RATE
)
567 rate_n_flags
|= RATE_MCS_CCK_MSK
;
569 } else if (is_Ht(tbl
->lq_type
)) {
570 if (index
> IWL_LAST_OFDM_RATE
) {
571 IWL_ERR(priv
, "Invalid HT rate index %d\n", index
);
572 index
= IWL_LAST_OFDM_RATE
;
574 rate_n_flags
= RATE_MCS_HT_MSK
;
576 if (is_siso(tbl
->lq_type
))
577 rate_n_flags
|= iwl_rates
[index
].plcp_siso
;
578 else if (is_mimo2(tbl
->lq_type
))
579 rate_n_flags
|= iwl_rates
[index
].plcp_mimo2
;
581 rate_n_flags
|= iwl_rates
[index
].plcp_mimo3
;
583 IWL_ERR(priv
, "Invalid tbl->lq_type %d\n", tbl
->lq_type
);
586 rate_n_flags
|= ((tbl
->ant_type
<< RATE_MCS_ANT_POS
) &
587 RATE_MCS_ANT_ABC_MSK
);
589 if (is_Ht(tbl
->lq_type
)) {
592 rate_n_flags
|= RATE_MCS_DUP_MSK
;
594 rate_n_flags
|= RATE_MCS_HT40_MSK
;
597 rate_n_flags
|= RATE_MCS_SGI_MSK
;
600 rate_n_flags
|= RATE_MCS_GF_MSK
;
601 if (is_siso(tbl
->lq_type
) && tbl
->is_SGI
) {
602 rate_n_flags
&= ~RATE_MCS_SGI_MSK
;
603 IWL_ERR(priv
, "GF was set with SGI:SISO\n");
611 * Interpret uCode API's rate_n_flags format,
612 * fill "search" or "active" tx mode table.
614 static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags
,
615 enum ieee80211_band band
,
616 struct iwl_scale_tbl_info
*tbl
,
619 u32 ant_msk
= (rate_n_flags
& RATE_MCS_ANT_ABC_MSK
);
620 u8 num_of_ant
= get_num_of_ant_from_rate(rate_n_flags
);
623 memset(tbl
, 0, sizeof(struct iwl_scale_tbl_info
));
624 *rate_idx
= iwl_hwrate_to_plcp_idx(rate_n_flags
);
626 if (*rate_idx
== IWL_RATE_INVALID
) {
630 tbl
->is_SGI
= 0; /* default legacy setup */
633 tbl
->ant_type
= (ant_msk
>> RATE_MCS_ANT_POS
);
634 tbl
->lq_type
= LQ_NONE
;
635 tbl
->max_search
= IWL_MAX_SEARCH
;
637 /* legacy rate format */
638 if (!(rate_n_flags
& RATE_MCS_HT_MSK
)) {
639 if (num_of_ant
== 1) {
640 if (band
== IEEE80211_BAND_5GHZ
)
647 if (rate_n_flags
& RATE_MCS_SGI_MSK
)
650 if ((rate_n_flags
& RATE_MCS_HT40_MSK
) ||
651 (rate_n_flags
& RATE_MCS_DUP_MSK
))
654 if (rate_n_flags
& RATE_MCS_DUP_MSK
)
657 mcs
= rs_extract_rate(rate_n_flags
);
660 if (mcs
<= IWL_RATE_SISO_60M_PLCP
) {
662 tbl
->lq_type
= LQ_SISO
; /*else NONE*/
664 } else if (mcs
<= IWL_RATE_MIMO2_60M_PLCP
) {
666 tbl
->lq_type
= LQ_MIMO2
;
669 if (num_of_ant
== 3) {
670 tbl
->max_search
= IWL_MAX_11N_MIMO3_SEARCH
;
671 tbl
->lq_type
= LQ_MIMO3
;
678 /* switch to another antenna/antennas and return 1 */
679 /* if no other valid antenna found, return 0 */
680 static int rs_toggle_antenna(u32 valid_ant
, u32
*rate_n_flags
,
681 struct iwl_scale_tbl_info
*tbl
)
685 if (!tbl
->ant_type
|| tbl
->ant_type
> ANT_ABC
)
688 if (!rs_is_valid_ant(valid_ant
, tbl
->ant_type
))
691 new_ant_type
= ant_toggle_lookup
[tbl
->ant_type
];
693 while ((new_ant_type
!= tbl
->ant_type
) &&
694 !rs_is_valid_ant(valid_ant
, new_ant_type
))
695 new_ant_type
= ant_toggle_lookup
[new_ant_type
];
697 if (new_ant_type
== tbl
->ant_type
)
700 tbl
->ant_type
= new_ant_type
;
701 *rate_n_flags
&= ~RATE_MCS_ANT_ABC_MSK
;
702 *rate_n_flags
|= new_ant_type
<< RATE_MCS_ANT_POS
;
707 * Green-field mode is valid if the station supports it and
708 * there are no non-GF stations present in the BSS.
710 static bool rs_use_green(struct ieee80211_sta
*sta
)
712 struct iwl_station_priv
*sta_priv
= (void *)sta
->drv_priv
;
713 struct iwl_rxon_context
*ctx
= sta_priv
->common
.ctx
;
715 return (sta
->ht_cap
.cap
& IEEE80211_HT_CAP_GRN_FLD
) &&
716 !(ctx
->ht
.non_gf_sta_present
);
720 * rs_get_supported_rates - get the available rates
722 * if management frame or broadcast frame only return
723 * basic available rates.
726 static u16
rs_get_supported_rates(struct iwl_lq_sta
*lq_sta
,
727 struct ieee80211_hdr
*hdr
,
728 enum iwl_table_type rate_type
)
730 if (is_legacy(rate_type
)) {
731 return lq_sta
->active_legacy_rate
;
733 if (is_siso(rate_type
))
734 return lq_sta
->active_siso_rate
;
735 else if (is_mimo2(rate_type
))
736 return lq_sta
->active_mimo2_rate
;
738 return lq_sta
->active_mimo3_rate
;
742 static u16
rs_get_adjacent_rate(struct iwl_priv
*priv
, u8 index
, u16 rate_mask
,
745 u8 high
= IWL_RATE_INVALID
;
746 u8 low
= IWL_RATE_INVALID
;
748 /* 802.11A or ht walks to the next literal adjacent rate in
750 if (is_a_band(rate_type
) || !is_legacy(rate_type
)) {
754 /* Find the previous rate that is in the rate mask */
756 for (mask
= (1 << i
); i
>= 0; i
--, mask
>>= 1) {
757 if (rate_mask
& mask
) {
763 /* Find the next rate that is in the rate mask */
765 for (mask
= (1 << i
); i
< IWL_RATE_COUNT
; i
++, mask
<<= 1) {
766 if (rate_mask
& mask
) {
772 return (high
<< 8) | low
;
776 while (low
!= IWL_RATE_INVALID
) {
777 low
= iwl_rates
[low
].prev_rs
;
778 if (low
== IWL_RATE_INVALID
)
780 if (rate_mask
& (1 << low
))
782 IWL_DEBUG_RATE(priv
, "Skipping masked lower rate: %d\n", low
);
786 while (high
!= IWL_RATE_INVALID
) {
787 high
= iwl_rates
[high
].next_rs
;
788 if (high
== IWL_RATE_INVALID
)
790 if (rate_mask
& (1 << high
))
792 IWL_DEBUG_RATE(priv
, "Skipping masked higher rate: %d\n", high
);
795 return (high
<< 8) | low
;
798 static u32
rs_get_lower_rate(struct iwl_lq_sta
*lq_sta
,
799 struct iwl_scale_tbl_info
*tbl
,
800 u8 scale_index
, u8 ht_possible
)
805 u8 switch_to_legacy
= 0;
806 u8 is_green
= lq_sta
->is_green
;
807 struct iwl_priv
*priv
= lq_sta
->drv
;
809 /* check if we need to switch from HT to legacy rates.
810 * assumption is that mandatory rates (1Mbps or 6Mbps)
811 * are always supported (spec demand) */
812 if (!is_legacy(tbl
->lq_type
) && (!ht_possible
|| !scale_index
)) {
813 switch_to_legacy
= 1;
814 scale_index
= rs_ht_to_legacy
[scale_index
];
815 if (lq_sta
->band
== IEEE80211_BAND_5GHZ
)
820 if (num_of_ant(tbl
->ant_type
) > 1)
822 first_antenna(hw_params(priv
).valid_tx_ant
);
826 tbl
->max_search
= IWL_MAX_SEARCH
;
829 rate_mask
= rs_get_supported_rates(lq_sta
, NULL
, tbl
->lq_type
);
831 /* Mask with station rate restriction */
832 if (is_legacy(tbl
->lq_type
)) {
833 /* supp_rates has no CCK bits in A mode */
834 if (lq_sta
->band
== IEEE80211_BAND_5GHZ
)
835 rate_mask
= (u16
)(rate_mask
&
836 (lq_sta
->supp_rates
<< IWL_FIRST_OFDM_RATE
));
838 rate_mask
= (u16
)(rate_mask
& lq_sta
->supp_rates
);
841 /* If we switched from HT to legacy, check current rate */
842 if (switch_to_legacy
&& (rate_mask
& (1 << scale_index
))) {
847 high_low
= rs_get_adjacent_rate(lq_sta
->drv
, scale_index
, rate_mask
,
849 low
= high_low
& 0xff;
851 if (low
== IWL_RATE_INVALID
)
855 return rate_n_flags_from_tbl(lq_sta
->drv
, tbl
, low
, is_green
);
859 * Simple function to compare two rate scale table types
861 static bool table_type_matches(struct iwl_scale_tbl_info
*a
,
862 struct iwl_scale_tbl_info
*b
)
864 return (a
->lq_type
== b
->lq_type
) && (a
->ant_type
== b
->ant_type
) &&
865 (a
->is_SGI
== b
->is_SGI
);
868 static void rs_bt_update_lq(struct iwl_priv
*priv
, struct iwl_rxon_context
*ctx
,
869 struct iwl_lq_sta
*lq_sta
)
871 struct iwl_scale_tbl_info
*tbl
;
872 bool full_concurrent
= priv
->bt_full_concurrent
;
875 if (priv
->bt_ant_couple_ok
) {
877 * Is there a need to switch between
878 * full concurrency and 3-wire?
880 spin_lock_irqsave(&priv
->shrd
->lock
, flags
);
881 if (priv
->bt_ci_compliance
&& priv
->bt_ant_couple_ok
)
882 full_concurrent
= true;
884 full_concurrent
= false;
885 spin_unlock_irqrestore(&priv
->shrd
->lock
, flags
);
887 if ((priv
->bt_traffic_load
!= priv
->last_bt_traffic_load
) ||
888 (priv
->bt_full_concurrent
!= full_concurrent
)) {
889 priv
->bt_full_concurrent
= full_concurrent
;
891 /* Update uCode's rate table. */
892 tbl
= &(lq_sta
->lq_info
[lq_sta
->active_tbl
]);
893 rs_fill_link_cmd(priv
, lq_sta
, tbl
->current_rate
);
894 iwl_send_lq_cmd(priv
, ctx
, &lq_sta
->lq
, CMD_ASYNC
, false);
896 queue_work(priv
->shrd
->workqueue
, &priv
->bt_full_concurrency
);
901 * mac80211 sends us Tx status
903 static void rs_tx_status(void *priv_r
, struct ieee80211_supported_band
*sband
,
904 struct ieee80211_sta
*sta
, void *priv_sta
,
909 int rs_index
, mac_index
, i
;
910 struct iwl_lq_sta
*lq_sta
= priv_sta
;
911 struct iwl_link_quality_cmd
*table
;
912 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)skb
->data
;
913 struct iwl_priv
*priv
= (struct iwl_priv
*)priv_r
;
914 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
915 enum mac80211_rate_control_flags mac_flags
;
917 struct iwl_scale_tbl_info tbl_type
;
918 struct iwl_scale_tbl_info
*curr_tbl
, *other_tbl
, *tmp_tbl
;
919 struct iwl_station_priv
*sta_priv
= (void *)sta
->drv_priv
;
920 struct iwl_rxon_context
*ctx
= sta_priv
->common
.ctx
;
922 IWL_DEBUG_RATE_LIMIT(priv
, "get frame ack response, update rate scale window\n");
924 /* Treat uninitialized rate scaling data same as non-existing. */
926 IWL_DEBUG_RATE(priv
, "Station rate scaling not created yet.\n");
928 } else if (!lq_sta
->drv
) {
929 IWL_DEBUG_RATE(priv
, "Rate scaling not initialized yet.\n");
933 if (!ieee80211_is_data(hdr
->frame_control
) ||
934 info
->flags
& IEEE80211_TX_CTL_NO_ACK
)
937 /* This packet was aggregated but doesn't carry status info */
938 if ((info
->flags
& IEEE80211_TX_CTL_AMPDU
) &&
939 !(info
->flags
& IEEE80211_TX_STAT_AMPDU
))
943 * Ignore this Tx frame response if its initial rate doesn't match
944 * that of latest Link Quality command. There may be stragglers
945 * from a previous Link Quality command, but we're no longer interested
946 * in those; they're either from the "active" mode while we're trying
947 * to check "search" mode, or a prior "search" mode after we've moved
948 * to a new "search" mode (which might become the new "active" mode).
951 tx_rate
= le32_to_cpu(table
->rs_table
[0].rate_n_flags
);
952 rs_get_tbl_info_from_mcs(tx_rate
, priv
->band
, &tbl_type
, &rs_index
);
953 if (priv
->band
== IEEE80211_BAND_5GHZ
)
954 rs_index
-= IWL_FIRST_OFDM_RATE
;
955 mac_flags
= info
->status
.rates
[0].flags
;
956 mac_index
= info
->status
.rates
[0].idx
;
957 /* For HT packets, map MCS to PLCP */
958 if (mac_flags
& IEEE80211_TX_RC_MCS
) {
959 mac_index
&= RATE_MCS_CODE_MSK
; /* Remove # of streams */
960 if (mac_index
>= (IWL_RATE_9M_INDEX
- IWL_FIRST_OFDM_RATE
))
963 * mac80211 HT index is always zero-indexed; we need to move
964 * HT OFDM rates after CCK rates in 2.4 GHz band
966 if (priv
->band
== IEEE80211_BAND_2GHZ
)
967 mac_index
+= IWL_FIRST_OFDM_RATE
;
969 /* Here we actually compare this rate to the latest LQ command */
970 if ((mac_index
< 0) ||
971 (tbl_type
.is_SGI
!= !!(mac_flags
& IEEE80211_TX_RC_SHORT_GI
)) ||
972 (tbl_type
.is_ht40
!= !!(mac_flags
& IEEE80211_TX_RC_40_MHZ_WIDTH
)) ||
973 (tbl_type
.is_dup
!= !!(mac_flags
& IEEE80211_TX_RC_DUP_DATA
)) ||
974 (tbl_type
.ant_type
!= info
->antenna_sel_tx
) ||
975 (!!(tx_rate
& RATE_MCS_HT_MSK
) != !!(mac_flags
& IEEE80211_TX_RC_MCS
)) ||
976 (!!(tx_rate
& RATE_MCS_GF_MSK
) != !!(mac_flags
& IEEE80211_TX_RC_GREEN_FIELD
)) ||
977 (rs_index
!= mac_index
)) {
978 IWL_DEBUG_RATE(priv
, "initial rate %d does not match %d (0x%x)\n", mac_index
, rs_index
, tx_rate
);
980 * Since rates mis-match, the last LQ command may have failed.
981 * After IWL_MISSED_RATE_MAX mis-matches, resync the uCode with
984 lq_sta
->missed_rate_counter
++;
985 if (lq_sta
->missed_rate_counter
> IWL_MISSED_RATE_MAX
) {
986 lq_sta
->missed_rate_counter
= 0;
987 iwl_send_lq_cmd(priv
, ctx
, &lq_sta
->lq
, CMD_ASYNC
, false);
989 /* Regardless, ignore this status info for outdated rate */
992 /* Rate did match, so reset the missed_rate_counter */
993 lq_sta
->missed_rate_counter
= 0;
995 /* Figure out if rate scale algorithm is in active or search table */
996 if (table_type_matches(&tbl_type
,
997 &(lq_sta
->lq_info
[lq_sta
->active_tbl
]))) {
998 curr_tbl
= &(lq_sta
->lq_info
[lq_sta
->active_tbl
]);
999 other_tbl
= &(lq_sta
->lq_info
[1 - lq_sta
->active_tbl
]);
1000 } else if (table_type_matches(&tbl_type
,
1001 &lq_sta
->lq_info
[1 - lq_sta
->active_tbl
])) {
1002 curr_tbl
= &(lq_sta
->lq_info
[1 - lq_sta
->active_tbl
]);
1003 other_tbl
= &(lq_sta
->lq_info
[lq_sta
->active_tbl
]);
1005 IWL_DEBUG_RATE(priv
, "Neither active nor search matches tx rate\n");
1006 tmp_tbl
= &(lq_sta
->lq_info
[lq_sta
->active_tbl
]);
1007 IWL_DEBUG_RATE(priv
, "active- lq:%x, ant:%x, SGI:%d\n",
1008 tmp_tbl
->lq_type
, tmp_tbl
->ant_type
, tmp_tbl
->is_SGI
);
1009 tmp_tbl
= &(lq_sta
->lq_info
[1 - lq_sta
->active_tbl
]);
1010 IWL_DEBUG_RATE(priv
, "search- lq:%x, ant:%x, SGI:%d\n",
1011 tmp_tbl
->lq_type
, tmp_tbl
->ant_type
, tmp_tbl
->is_SGI
);
1012 IWL_DEBUG_RATE(priv
, "actual- lq:%x, ant:%x, SGI:%d\n",
1013 tbl_type
.lq_type
, tbl_type
.ant_type
, tbl_type
.is_SGI
);
1015 * no matching table found, let's by-pass the data collection
1016 * and continue to perform rate scale to find the rate table
1018 rs_stay_in_table(lq_sta
, true);
1023 * Updating the frame history depends on whether packets were
1026 * For aggregation, all packets were transmitted at the same rate, the
1027 * first index into rate scale table.
1029 if (info
->flags
& IEEE80211_TX_STAT_AMPDU
) {
1030 tx_rate
= le32_to_cpu(table
->rs_table
[0].rate_n_flags
);
1031 rs_get_tbl_info_from_mcs(tx_rate
, priv
->band
, &tbl_type
,
1033 rs_collect_tx_data(curr_tbl
, rs_index
,
1034 info
->status
.ampdu_len
,
1035 info
->status
.ampdu_ack_len
);
1037 /* Update success/fail counts if not searching for new mode */
1038 if (lq_sta
->stay_in_tbl
) {
1039 lq_sta
->total_success
+= info
->status
.ampdu_ack_len
;
1040 lq_sta
->total_failed
+= (info
->status
.ampdu_len
-
1041 info
->status
.ampdu_ack_len
);
1045 * For legacy, update frame history with for each Tx retry.
1047 retries
= info
->status
.rates
[0].count
- 1;
1048 /* HW doesn't send more than 15 retries */
1049 retries
= min(retries
, 15);
1051 /* The last transmission may have been successful */
1052 legacy_success
= !!(info
->flags
& IEEE80211_TX_STAT_ACK
);
1053 /* Collect data for each rate used during failed TX attempts */
1054 for (i
= 0; i
<= retries
; ++i
) {
1055 tx_rate
= le32_to_cpu(table
->rs_table
[i
].rate_n_flags
);
1056 rs_get_tbl_info_from_mcs(tx_rate
, priv
->band
,
1057 &tbl_type
, &rs_index
);
1059 * Only collect stats if retried rate is in the same RS
1060 * table as active/search.
1062 if (table_type_matches(&tbl_type
, curr_tbl
))
1064 else if (table_type_matches(&tbl_type
, other_tbl
))
1065 tmp_tbl
= other_tbl
;
1068 rs_collect_tx_data(tmp_tbl
, rs_index
, 1,
1069 i
< retries
? 0 : legacy_success
);
1072 /* Update success/fail counts if not searching for new mode */
1073 if (lq_sta
->stay_in_tbl
) {
1074 lq_sta
->total_success
+= legacy_success
;
1075 lq_sta
->total_failed
+= retries
+ (1 - legacy_success
);
1078 /* The last TX rate is cached in lq_sta; it's set in if/else above */
1079 lq_sta
->last_rate_n_flags
= tx_rate
;
1081 /* See if there's a better rate or modulation mode to try. */
1082 if (sta
&& sta
->supp_rates
[sband
->band
])
1083 rs_rate_scale_perform(priv
, skb
, sta
, lq_sta
);
1085 #if defined(CONFIG_MAC80211_DEBUGFS) && defined(CONFIG_IWLWIFI_DEVICE_SVTOOL)
1086 if ((priv
->tm_fixed_rate
) &&
1087 (priv
->tm_fixed_rate
!= lq_sta
->dbg_fixed_rate
))
1088 rs_program_fix_rate(priv
, lq_sta
);
1090 if (priv
->cfg
->bt_params
&& priv
->cfg
->bt_params
->advanced_bt_coexist
)
1091 rs_bt_update_lq(priv
, ctx
, lq_sta
);
1095 * Begin a period of staying with a selected modulation mode.
1096 * Set "stay_in_tbl" flag to prevent any mode switches.
1097 * Set frame tx success limits according to legacy vs. high-throughput,
1098 * and reset overall (spanning all rates) tx success history statistics.
1099 * These control how long we stay using same modulation mode before
1100 * searching for a new mode.
1102 static void rs_set_stay_in_table(struct iwl_priv
*priv
, u8 is_legacy
,
1103 struct iwl_lq_sta
*lq_sta
)
1105 IWL_DEBUG_RATE(priv
, "we are staying in the same table\n");
1106 lq_sta
->stay_in_tbl
= 1; /* only place this gets set */
1108 lq_sta
->table_count_limit
= IWL_LEGACY_TABLE_COUNT
;
1109 lq_sta
->max_failure_limit
= IWL_LEGACY_FAILURE_LIMIT
;
1110 lq_sta
->max_success_limit
= IWL_LEGACY_SUCCESS_LIMIT
;
1112 lq_sta
->table_count_limit
= IWL_NONE_LEGACY_TABLE_COUNT
;
1113 lq_sta
->max_failure_limit
= IWL_NONE_LEGACY_FAILURE_LIMIT
;
1114 lq_sta
->max_success_limit
= IWL_NONE_LEGACY_SUCCESS_LIMIT
;
1116 lq_sta
->table_count
= 0;
1117 lq_sta
->total_failed
= 0;
1118 lq_sta
->total_success
= 0;
1119 lq_sta
->flush_timer
= jiffies
;
1120 lq_sta
->action_counter
= 0;
1124 * Find correct throughput table for given mode of modulation
1126 static void rs_set_expected_tpt_table(struct iwl_lq_sta
*lq_sta
,
1127 struct iwl_scale_tbl_info
*tbl
)
1129 /* Used to choose among HT tables */
1130 s32 (*ht_tbl_pointer
)[IWL_RATE_COUNT
];
1132 /* Check for invalid LQ type */
1133 if (WARN_ON_ONCE(!is_legacy(tbl
->lq_type
) && !is_Ht(tbl
->lq_type
))) {
1134 tbl
->expected_tpt
= expected_tpt_legacy
;
1138 /* Legacy rates have only one table */
1139 if (is_legacy(tbl
->lq_type
)) {
1140 tbl
->expected_tpt
= expected_tpt_legacy
;
1144 /* Choose among many HT tables depending on number of streams
1145 * (SISO/MIMO2/MIMO3), channel width (20/40), SGI, and aggregation
1147 if (is_siso(tbl
->lq_type
) && (!tbl
->is_ht40
|| lq_sta
->is_dup
))
1148 ht_tbl_pointer
= expected_tpt_siso20MHz
;
1149 else if (is_siso(tbl
->lq_type
))
1150 ht_tbl_pointer
= expected_tpt_siso40MHz
;
1151 else if (is_mimo2(tbl
->lq_type
) && (!tbl
->is_ht40
|| lq_sta
->is_dup
))
1152 ht_tbl_pointer
= expected_tpt_mimo2_20MHz
;
1153 else if (is_mimo2(tbl
->lq_type
))
1154 ht_tbl_pointer
= expected_tpt_mimo2_40MHz
;
1155 else if (is_mimo3(tbl
->lq_type
) && (!tbl
->is_ht40
|| lq_sta
->is_dup
))
1156 ht_tbl_pointer
= expected_tpt_mimo3_20MHz
;
1157 else /* if (is_mimo3(tbl->lq_type)) <-- must be true */
1158 ht_tbl_pointer
= expected_tpt_mimo3_40MHz
;
1160 if (!tbl
->is_SGI
&& !lq_sta
->is_agg
) /* Normal */
1161 tbl
->expected_tpt
= ht_tbl_pointer
[0];
1162 else if (tbl
->is_SGI
&& !lq_sta
->is_agg
) /* SGI */
1163 tbl
->expected_tpt
= ht_tbl_pointer
[1];
1164 else if (!tbl
->is_SGI
&& lq_sta
->is_agg
) /* AGG */
1165 tbl
->expected_tpt
= ht_tbl_pointer
[2];
1167 tbl
->expected_tpt
= ht_tbl_pointer
[3];
1171 * Find starting rate for new "search" high-throughput mode of modulation.
1172 * Goal is to find lowest expected rate (under perfect conditions) that is
1173 * above the current measured throughput of "active" mode, to give new mode
1174 * a fair chance to prove itself without too many challenges.
1176 * This gets called when transitioning to more aggressive modulation
1177 * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive
1178 * (i.e. MIMO to SISO). When moving to MIMO, bit rate will typically need
1179 * to decrease to match "active" throughput. When moving from MIMO to SISO,
1180 * bit rate will typically need to increase, but not if performance was bad.
1182 static s32
rs_get_best_rate(struct iwl_priv
*priv
,
1183 struct iwl_lq_sta
*lq_sta
,
1184 struct iwl_scale_tbl_info
*tbl
, /* "search" */
1185 u16 rate_mask
, s8 index
)
1187 /* "active" values */
1188 struct iwl_scale_tbl_info
*active_tbl
=
1189 &(lq_sta
->lq_info
[lq_sta
->active_tbl
]);
1190 s32 active_sr
= active_tbl
->win
[index
].success_ratio
;
1191 s32 active_tpt
= active_tbl
->expected_tpt
[index
];
1193 /* expected "search" throughput */
1194 s32
*tpt_tbl
= tbl
->expected_tpt
;
1196 s32 new_rate
, high
, low
, start_hi
;
1200 new_rate
= high
= low
= start_hi
= IWL_RATE_INVALID
;
1203 high_low
= rs_get_adjacent_rate(priv
, rate
, rate_mask
,
1206 low
= high_low
& 0xff;
1207 high
= (high_low
>> 8) & 0xff;
1210 * Lower the "search" bit rate, to give new "search" mode
1211 * approximately the same throughput as "active" if:
1213 * 1) "Active" mode has been working modestly well (but not
1214 * great), and expected "search" throughput (under perfect
1215 * conditions) at candidate rate is above the actual
1216 * measured "active" throughput (but less than expected
1217 * "active" throughput under perfect conditions).
1219 * 2) "Active" mode has been working perfectly or very well
1220 * and expected "search" throughput (under perfect
1221 * conditions) at candidate rate is above expected
1222 * "active" throughput (under perfect conditions).
1224 if ((((100 * tpt_tbl
[rate
]) > lq_sta
->last_tpt
) &&
1225 ((active_sr
> IWL_RATE_DECREASE_TH
) &&
1226 (active_sr
<= IWL_RATE_HIGH_TH
) &&
1227 (tpt_tbl
[rate
] <= active_tpt
))) ||
1228 ((active_sr
>= IWL_RATE_SCALE_SWITCH
) &&
1229 (tpt_tbl
[rate
] > active_tpt
))) {
1231 /* (2nd or later pass)
1232 * If we've already tried to raise the rate, and are
1233 * now trying to lower it, use the higher rate. */
1234 if (start_hi
!= IWL_RATE_INVALID
) {
1235 new_rate
= start_hi
;
1241 /* Loop again with lower rate */
1242 if (low
!= IWL_RATE_INVALID
)
1245 /* Lower rate not available, use the original */
1249 /* Else try to raise the "search" rate to match "active" */
1251 /* (2nd or later pass)
1252 * If we've already tried to lower the rate, and are
1253 * now trying to raise it, use the lower rate. */
1254 if (new_rate
!= IWL_RATE_INVALID
)
1257 /* Loop again with higher rate */
1258 else if (high
!= IWL_RATE_INVALID
) {
1262 /* Higher rate not available, use the original */
1274 * Set up search table for MIMO2
1276 static int rs_switch_to_mimo2(struct iwl_priv
*priv
,
1277 struct iwl_lq_sta
*lq_sta
,
1278 struct ieee80211_conf
*conf
,
1279 struct ieee80211_sta
*sta
,
1280 struct iwl_scale_tbl_info
*tbl
, int index
)
1284 s8 is_green
= lq_sta
->is_green
;
1285 struct iwl_station_priv
*sta_priv
= (void *)sta
->drv_priv
;
1286 struct iwl_rxon_context
*ctx
= sta_priv
->common
.ctx
;
1288 if (!conf_is_ht(conf
) || !sta
->ht_cap
.ht_supported
)
1291 if (((sta
->ht_cap
.cap
& IEEE80211_HT_CAP_SM_PS
) >> 2)
1292 == WLAN_HT_CAP_SM_PS_STATIC
)
1295 /* Need both Tx chains/antennas to support MIMO */
1296 if (hw_params(priv
).tx_chains_num
< 2)
1299 IWL_DEBUG_RATE(priv
, "LQ: try to switch to MIMO2\n");
1301 tbl
->lq_type
= LQ_MIMO2
;
1302 tbl
->is_dup
= lq_sta
->is_dup
;
1304 tbl
->max_search
= IWL_MAX_SEARCH
;
1305 rate_mask
= lq_sta
->active_mimo2_rate
;
1307 if (iwl_is_ht40_tx_allowed(priv
, ctx
, &sta
->ht_cap
))
1312 rs_set_expected_tpt_table(lq_sta
, tbl
);
1314 rate
= rs_get_best_rate(priv
, lq_sta
, tbl
, rate_mask
, index
);
1316 IWL_DEBUG_RATE(priv
, "LQ: MIMO2 best rate %d mask %X\n", rate
, rate_mask
);
1317 if ((rate
== IWL_RATE_INVALID
) || !((1 << rate
) & rate_mask
)) {
1318 IWL_DEBUG_RATE(priv
, "Can't switch with index %d rate mask %x\n",
1322 tbl
->current_rate
= rate_n_flags_from_tbl(priv
, tbl
, rate
, is_green
);
1324 IWL_DEBUG_RATE(priv
, "LQ: Switch to new mcs %X index is green %X\n",
1325 tbl
->current_rate
, is_green
);
1330 * Set up search table for MIMO3
1332 static int rs_switch_to_mimo3(struct iwl_priv
*priv
,
1333 struct iwl_lq_sta
*lq_sta
,
1334 struct ieee80211_conf
*conf
,
1335 struct ieee80211_sta
*sta
,
1336 struct iwl_scale_tbl_info
*tbl
, int index
)
1340 s8 is_green
= lq_sta
->is_green
;
1341 struct iwl_station_priv
*sta_priv
= (void *)sta
->drv_priv
;
1342 struct iwl_rxon_context
*ctx
= sta_priv
->common
.ctx
;
1344 if (!conf_is_ht(conf
) || !sta
->ht_cap
.ht_supported
)
1347 if (((sta
->ht_cap
.cap
& IEEE80211_HT_CAP_SM_PS
) >> 2)
1348 == WLAN_HT_CAP_SM_PS_STATIC
)
1351 /* Need both Tx chains/antennas to support MIMO */
1352 if (hw_params(priv
).tx_chains_num
< 3)
1355 IWL_DEBUG_RATE(priv
, "LQ: try to switch to MIMO3\n");
1357 tbl
->lq_type
= LQ_MIMO3
;
1358 tbl
->is_dup
= lq_sta
->is_dup
;
1360 tbl
->max_search
= IWL_MAX_11N_MIMO3_SEARCH
;
1361 rate_mask
= lq_sta
->active_mimo3_rate
;
1363 if (iwl_is_ht40_tx_allowed(priv
, ctx
, &sta
->ht_cap
))
1368 rs_set_expected_tpt_table(lq_sta
, tbl
);
1370 rate
= rs_get_best_rate(priv
, lq_sta
, tbl
, rate_mask
, index
);
1372 IWL_DEBUG_RATE(priv
, "LQ: MIMO3 best rate %d mask %X\n",
1374 if ((rate
== IWL_RATE_INVALID
) || !((1 << rate
) & rate_mask
)) {
1375 IWL_DEBUG_RATE(priv
, "Can't switch with index %d rate mask %x\n",
1379 tbl
->current_rate
= rate_n_flags_from_tbl(priv
, tbl
, rate
, is_green
);
1381 IWL_DEBUG_RATE(priv
, "LQ: Switch to new mcs %X index is green %X\n",
1382 tbl
->current_rate
, is_green
);
1387 * Set up search table for SISO
1389 static int rs_switch_to_siso(struct iwl_priv
*priv
,
1390 struct iwl_lq_sta
*lq_sta
,
1391 struct ieee80211_conf
*conf
,
1392 struct ieee80211_sta
*sta
,
1393 struct iwl_scale_tbl_info
*tbl
, int index
)
1396 u8 is_green
= lq_sta
->is_green
;
1398 struct iwl_station_priv
*sta_priv
= (void *)sta
->drv_priv
;
1399 struct iwl_rxon_context
*ctx
= sta_priv
->common
.ctx
;
1401 if (!conf_is_ht(conf
) || !sta
->ht_cap
.ht_supported
)
1404 IWL_DEBUG_RATE(priv
, "LQ: try to switch to SISO\n");
1406 tbl
->is_dup
= lq_sta
->is_dup
;
1407 tbl
->lq_type
= LQ_SISO
;
1409 tbl
->max_search
= IWL_MAX_SEARCH
;
1410 rate_mask
= lq_sta
->active_siso_rate
;
1412 if (iwl_is_ht40_tx_allowed(priv
, ctx
, &sta
->ht_cap
))
1418 tbl
->is_SGI
= 0; /*11n spec: no SGI in SISO+Greenfield*/
1420 rs_set_expected_tpt_table(lq_sta
, tbl
);
1421 rate
= rs_get_best_rate(priv
, lq_sta
, tbl
, rate_mask
, index
);
1423 IWL_DEBUG_RATE(priv
, "LQ: get best rate %d mask %X\n", rate
, rate_mask
);
1424 if ((rate
== IWL_RATE_INVALID
) || !((1 << rate
) & rate_mask
)) {
1425 IWL_DEBUG_RATE(priv
, "can not switch with index %d rate mask %x\n",
1429 tbl
->current_rate
= rate_n_flags_from_tbl(priv
, tbl
, rate
, is_green
);
1430 IWL_DEBUG_RATE(priv
, "LQ: Switch to new mcs %X index is green %X\n",
1431 tbl
->current_rate
, is_green
);
1436 * Try to switch to new modulation mode from legacy
1438 static int rs_move_legacy_other(struct iwl_priv
*priv
,
1439 struct iwl_lq_sta
*lq_sta
,
1440 struct ieee80211_conf
*conf
,
1441 struct ieee80211_sta
*sta
,
1444 struct iwl_scale_tbl_info
*tbl
= &(lq_sta
->lq_info
[lq_sta
->active_tbl
]);
1445 struct iwl_scale_tbl_info
*search_tbl
=
1446 &(lq_sta
->lq_info
[(1 - lq_sta
->active_tbl
)]);
1447 struct iwl_rate_scale_data
*window
= &(tbl
->win
[index
]);
1448 u32 sz
= (sizeof(struct iwl_scale_tbl_info
) -
1449 (sizeof(struct iwl_rate_scale_data
) * IWL_RATE_COUNT
));
1451 u8 valid_tx_ant
= hw_params(priv
).valid_tx_ant
;
1452 u8 tx_chains_num
= hw_params(priv
).tx_chains_num
;
1454 u8 update_search_tbl_counter
= 0;
1456 switch (priv
->bt_traffic_load
) {
1457 case IWL_BT_COEX_TRAFFIC_LOAD_NONE
:
1460 case IWL_BT_COEX_TRAFFIC_LOAD_LOW
:
1461 /* avoid antenna B unless MIMO */
1463 first_antenna(hw_params(priv
).valid_tx_ant
);
1464 if (tbl
->action
== IWL_LEGACY_SWITCH_ANTENNA2
)
1465 tbl
->action
= IWL_LEGACY_SWITCH_ANTENNA1
;
1467 case IWL_BT_COEX_TRAFFIC_LOAD_HIGH
:
1468 case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS
:
1469 /* avoid antenna B and MIMO */
1471 first_antenna(hw_params(priv
).valid_tx_ant
);
1472 if (tbl
->action
>= IWL_LEGACY_SWITCH_ANTENNA2
&&
1473 tbl
->action
!= IWL_LEGACY_SWITCH_SISO
)
1474 tbl
->action
= IWL_LEGACY_SWITCH_SISO
;
1477 IWL_ERR(priv
, "Invalid BT load %d", priv
->bt_traffic_load
);
1481 if (!iwl_ht_enabled(priv
))
1482 /* stay in Legacy */
1483 tbl
->action
= IWL_LEGACY_SWITCH_ANTENNA1
;
1484 else if (iwl_tx_ant_restriction(priv
) == IWL_ANT_OK_SINGLE
&&
1485 tbl
->action
> IWL_LEGACY_SWITCH_SISO
)
1486 tbl
->action
= IWL_LEGACY_SWITCH_SISO
;
1488 /* configure as 1x1 if bt full concurrency */
1489 if (priv
->bt_full_concurrent
) {
1490 if (!iwl_ht_enabled(priv
))
1491 tbl
->action
= IWL_LEGACY_SWITCH_ANTENNA1
;
1492 else if (tbl
->action
>= IWL_LEGACY_SWITCH_ANTENNA2
)
1493 tbl
->action
= IWL_LEGACY_SWITCH_SISO
;
1495 first_antenna(hw_params(priv
).valid_tx_ant
);
1498 start_action
= tbl
->action
;
1500 lq_sta
->action_counter
++;
1501 switch (tbl
->action
) {
1502 case IWL_LEGACY_SWITCH_ANTENNA1
:
1503 case IWL_LEGACY_SWITCH_ANTENNA2
:
1504 IWL_DEBUG_RATE(priv
, "LQ: Legacy toggle Antenna\n");
1506 if ((tbl
->action
== IWL_LEGACY_SWITCH_ANTENNA1
&&
1507 tx_chains_num
<= 1) ||
1508 (tbl
->action
== IWL_LEGACY_SWITCH_ANTENNA2
&&
1509 tx_chains_num
<= 2))
1512 /* Don't change antenna if success has been great */
1513 if (window
->success_ratio
>= IWL_RS_GOOD_RATIO
&&
1514 !priv
->bt_full_concurrent
&&
1515 priv
->bt_traffic_load
==
1516 IWL_BT_COEX_TRAFFIC_LOAD_NONE
)
1519 /* Set up search table to try other antenna */
1520 memcpy(search_tbl
, tbl
, sz
);
1522 if (rs_toggle_antenna(valid_tx_ant
,
1523 &search_tbl
->current_rate
, search_tbl
)) {
1524 update_search_tbl_counter
= 1;
1525 rs_set_expected_tpt_table(lq_sta
, search_tbl
);
1529 case IWL_LEGACY_SWITCH_SISO
:
1530 IWL_DEBUG_RATE(priv
, "LQ: Legacy switch to SISO\n");
1532 /* Set up search table to try SISO */
1533 memcpy(search_tbl
, tbl
, sz
);
1534 search_tbl
->is_SGI
= 0;
1535 ret
= rs_switch_to_siso(priv
, lq_sta
, conf
, sta
,
1538 lq_sta
->action_counter
= 0;
1543 case IWL_LEGACY_SWITCH_MIMO2_AB
:
1544 case IWL_LEGACY_SWITCH_MIMO2_AC
:
1545 case IWL_LEGACY_SWITCH_MIMO2_BC
:
1546 IWL_DEBUG_RATE(priv
, "LQ: Legacy switch to MIMO2\n");
1548 /* Set up search table to try MIMO */
1549 memcpy(search_tbl
, tbl
, sz
);
1550 search_tbl
->is_SGI
= 0;
1552 if (tbl
->action
== IWL_LEGACY_SWITCH_MIMO2_AB
)
1553 search_tbl
->ant_type
= ANT_AB
;
1554 else if (tbl
->action
== IWL_LEGACY_SWITCH_MIMO2_AC
)
1555 search_tbl
->ant_type
= ANT_AC
;
1557 search_tbl
->ant_type
= ANT_BC
;
1559 if (!rs_is_valid_ant(valid_tx_ant
, search_tbl
->ant_type
))
1562 ret
= rs_switch_to_mimo2(priv
, lq_sta
, conf
, sta
,
1565 lq_sta
->action_counter
= 0;
1570 case IWL_LEGACY_SWITCH_MIMO3_ABC
:
1571 IWL_DEBUG_RATE(priv
, "LQ: Legacy switch to MIMO3\n");
1573 /* Set up search table to try MIMO3 */
1574 memcpy(search_tbl
, tbl
, sz
);
1575 search_tbl
->is_SGI
= 0;
1577 search_tbl
->ant_type
= ANT_ABC
;
1579 if (!rs_is_valid_ant(valid_tx_ant
, search_tbl
->ant_type
))
1582 ret
= rs_switch_to_mimo3(priv
, lq_sta
, conf
, sta
,
1585 lq_sta
->action_counter
= 0;
1591 if (tbl
->action
> IWL_LEGACY_SWITCH_MIMO3_ABC
)
1592 tbl
->action
= IWL_LEGACY_SWITCH_ANTENNA1
;
1594 if (tbl
->action
== start_action
)
1598 search_tbl
->lq_type
= LQ_NONE
;
1602 lq_sta
->search_better_tbl
= 1;
1604 if (tbl
->action
> IWL_LEGACY_SWITCH_MIMO3_ABC
)
1605 tbl
->action
= IWL_LEGACY_SWITCH_ANTENNA1
;
1606 if (update_search_tbl_counter
)
1607 search_tbl
->action
= tbl
->action
;
1613 * Try to switch to new modulation mode from SISO
1615 static int rs_move_siso_to_other(struct iwl_priv
*priv
,
1616 struct iwl_lq_sta
*lq_sta
,
1617 struct ieee80211_conf
*conf
,
1618 struct ieee80211_sta
*sta
, int index
)
1620 u8 is_green
= lq_sta
->is_green
;
1621 struct iwl_scale_tbl_info
*tbl
= &(lq_sta
->lq_info
[lq_sta
->active_tbl
]);
1622 struct iwl_scale_tbl_info
*search_tbl
=
1623 &(lq_sta
->lq_info
[(1 - lq_sta
->active_tbl
)]);
1624 struct iwl_rate_scale_data
*window
= &(tbl
->win
[index
]);
1625 struct ieee80211_sta_ht_cap
*ht_cap
= &sta
->ht_cap
;
1626 u32 sz
= (sizeof(struct iwl_scale_tbl_info
) -
1627 (sizeof(struct iwl_rate_scale_data
) * IWL_RATE_COUNT
));
1629 u8 valid_tx_ant
= hw_params(priv
).valid_tx_ant
;
1630 u8 tx_chains_num
= hw_params(priv
).tx_chains_num
;
1631 u8 update_search_tbl_counter
= 0;
1634 switch (priv
->bt_traffic_load
) {
1635 case IWL_BT_COEX_TRAFFIC_LOAD_NONE
:
1638 case IWL_BT_COEX_TRAFFIC_LOAD_LOW
:
1639 /* avoid antenna B unless MIMO */
1641 first_antenna(hw_params(priv
).valid_tx_ant
);
1642 if (tbl
->action
== IWL_SISO_SWITCH_ANTENNA2
)
1643 tbl
->action
= IWL_SISO_SWITCH_ANTENNA1
;
1645 case IWL_BT_COEX_TRAFFIC_LOAD_HIGH
:
1646 case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS
:
1647 /* avoid antenna B and MIMO */
1649 first_antenna(hw_params(priv
).valid_tx_ant
);
1650 if (tbl
->action
!= IWL_SISO_SWITCH_ANTENNA1
)
1651 tbl
->action
= IWL_SISO_SWITCH_ANTENNA1
;
1654 IWL_ERR(priv
, "Invalid BT load %d", priv
->bt_traffic_load
);
1658 if (iwl_tx_ant_restriction(priv
) == IWL_ANT_OK_SINGLE
&&
1659 tbl
->action
> IWL_SISO_SWITCH_ANTENNA2
) {
1661 tbl
->action
= IWL_SISO_SWITCH_ANTENNA1
;
1664 /* configure as 1x1 if bt full concurrency */
1665 if (priv
->bt_full_concurrent
) {
1667 first_antenna(hw_params(priv
).valid_tx_ant
);
1668 if (tbl
->action
>= IWL_LEGACY_SWITCH_ANTENNA2
)
1669 tbl
->action
= IWL_SISO_SWITCH_ANTENNA1
;
1672 start_action
= tbl
->action
;
1674 lq_sta
->action_counter
++;
1675 switch (tbl
->action
) {
1676 case IWL_SISO_SWITCH_ANTENNA1
:
1677 case IWL_SISO_SWITCH_ANTENNA2
:
1678 IWL_DEBUG_RATE(priv
, "LQ: SISO toggle Antenna\n");
1679 if ((tbl
->action
== IWL_SISO_SWITCH_ANTENNA1
&&
1680 tx_chains_num
<= 1) ||
1681 (tbl
->action
== IWL_SISO_SWITCH_ANTENNA2
&&
1682 tx_chains_num
<= 2))
1685 if (window
->success_ratio
>= IWL_RS_GOOD_RATIO
&&
1686 !priv
->bt_full_concurrent
&&
1687 priv
->bt_traffic_load
==
1688 IWL_BT_COEX_TRAFFIC_LOAD_NONE
)
1691 memcpy(search_tbl
, tbl
, sz
);
1692 if (rs_toggle_antenna(valid_tx_ant
,
1693 &search_tbl
->current_rate
, search_tbl
)) {
1694 update_search_tbl_counter
= 1;
1698 case IWL_SISO_SWITCH_MIMO2_AB
:
1699 case IWL_SISO_SWITCH_MIMO2_AC
:
1700 case IWL_SISO_SWITCH_MIMO2_BC
:
1701 IWL_DEBUG_RATE(priv
, "LQ: SISO switch to MIMO2\n");
1702 memcpy(search_tbl
, tbl
, sz
);
1703 search_tbl
->is_SGI
= 0;
1705 if (tbl
->action
== IWL_SISO_SWITCH_MIMO2_AB
)
1706 search_tbl
->ant_type
= ANT_AB
;
1707 else if (tbl
->action
== IWL_SISO_SWITCH_MIMO2_AC
)
1708 search_tbl
->ant_type
= ANT_AC
;
1710 search_tbl
->ant_type
= ANT_BC
;
1712 if (!rs_is_valid_ant(valid_tx_ant
, search_tbl
->ant_type
))
1715 ret
= rs_switch_to_mimo2(priv
, lq_sta
, conf
, sta
,
1720 case IWL_SISO_SWITCH_GI
:
1721 if (!tbl
->is_ht40
&& !(ht_cap
->cap
&
1722 IEEE80211_HT_CAP_SGI_20
))
1724 if (tbl
->is_ht40
&& !(ht_cap
->cap
&
1725 IEEE80211_HT_CAP_SGI_40
))
1728 IWL_DEBUG_RATE(priv
, "LQ: SISO toggle SGI/NGI\n");
1730 memcpy(search_tbl
, tbl
, sz
);
1736 "SGI was set in GF+SISO\n");
1738 search_tbl
->is_SGI
= !tbl
->is_SGI
;
1739 rs_set_expected_tpt_table(lq_sta
, search_tbl
);
1741 s32 tpt
= lq_sta
->last_tpt
/ 100;
1742 if (tpt
>= search_tbl
->expected_tpt
[index
])
1745 search_tbl
->current_rate
=
1746 rate_n_flags_from_tbl(priv
, search_tbl
,
1748 update_search_tbl_counter
= 1;
1750 case IWL_SISO_SWITCH_MIMO3_ABC
:
1751 IWL_DEBUG_RATE(priv
, "LQ: SISO switch to MIMO3\n");
1752 memcpy(search_tbl
, tbl
, sz
);
1753 search_tbl
->is_SGI
= 0;
1754 search_tbl
->ant_type
= ANT_ABC
;
1756 if (!rs_is_valid_ant(valid_tx_ant
, search_tbl
->ant_type
))
1759 ret
= rs_switch_to_mimo3(priv
, lq_sta
, conf
, sta
,
1766 if (tbl
->action
> IWL_LEGACY_SWITCH_MIMO3_ABC
)
1767 tbl
->action
= IWL_SISO_SWITCH_ANTENNA1
;
1769 if (tbl
->action
== start_action
)
1772 search_tbl
->lq_type
= LQ_NONE
;
1776 lq_sta
->search_better_tbl
= 1;
1778 if (tbl
->action
> IWL_SISO_SWITCH_MIMO3_ABC
)
1779 tbl
->action
= IWL_SISO_SWITCH_ANTENNA1
;
1780 if (update_search_tbl_counter
)
1781 search_tbl
->action
= tbl
->action
;
1787 * Try to switch to new modulation mode from MIMO2
1789 static int rs_move_mimo2_to_other(struct iwl_priv
*priv
,
1790 struct iwl_lq_sta
*lq_sta
,
1791 struct ieee80211_conf
*conf
,
1792 struct ieee80211_sta
*sta
, int index
)
1794 s8 is_green
= lq_sta
->is_green
;
1795 struct iwl_scale_tbl_info
*tbl
= &(lq_sta
->lq_info
[lq_sta
->active_tbl
]);
1796 struct iwl_scale_tbl_info
*search_tbl
=
1797 &(lq_sta
->lq_info
[(1 - lq_sta
->active_tbl
)]);
1798 struct iwl_rate_scale_data
*window
= &(tbl
->win
[index
]);
1799 struct ieee80211_sta_ht_cap
*ht_cap
= &sta
->ht_cap
;
1800 u32 sz
= (sizeof(struct iwl_scale_tbl_info
) -
1801 (sizeof(struct iwl_rate_scale_data
) * IWL_RATE_COUNT
));
1803 u8 valid_tx_ant
= hw_params(priv
).valid_tx_ant
;
1804 u8 tx_chains_num
= hw_params(priv
).tx_chains_num
;
1805 u8 update_search_tbl_counter
= 0;
1808 switch (priv
->bt_traffic_load
) {
1809 case IWL_BT_COEX_TRAFFIC_LOAD_NONE
:
1812 case IWL_BT_COEX_TRAFFIC_LOAD_HIGH
:
1813 case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS
:
1814 /* avoid antenna B and MIMO */
1815 if (tbl
->action
!= IWL_MIMO2_SWITCH_SISO_A
)
1816 tbl
->action
= IWL_MIMO2_SWITCH_SISO_A
;
1818 case IWL_BT_COEX_TRAFFIC_LOAD_LOW
:
1819 /* avoid antenna B unless MIMO */
1820 if (tbl
->action
== IWL_MIMO2_SWITCH_SISO_B
||
1821 tbl
->action
== IWL_MIMO2_SWITCH_SISO_C
)
1822 tbl
->action
= IWL_MIMO2_SWITCH_SISO_A
;
1825 IWL_ERR(priv
, "Invalid BT load %d", priv
->bt_traffic_load
);
1829 if ((iwl_tx_ant_restriction(priv
) == IWL_ANT_OK_SINGLE
) &&
1830 (tbl
->action
< IWL_MIMO2_SWITCH_SISO_A
||
1831 tbl
->action
> IWL_MIMO2_SWITCH_SISO_C
)) {
1832 /* switch in SISO */
1833 tbl
->action
= IWL_MIMO2_SWITCH_SISO_A
;
1836 /* configure as 1x1 if bt full concurrency */
1837 if (priv
->bt_full_concurrent
&&
1838 (tbl
->action
< IWL_MIMO2_SWITCH_SISO_A
||
1839 tbl
->action
> IWL_MIMO2_SWITCH_SISO_C
))
1840 tbl
->action
= IWL_MIMO2_SWITCH_SISO_A
;
1842 start_action
= tbl
->action
;
1844 lq_sta
->action_counter
++;
1845 switch (tbl
->action
) {
1846 case IWL_MIMO2_SWITCH_ANTENNA1
:
1847 case IWL_MIMO2_SWITCH_ANTENNA2
:
1848 IWL_DEBUG_RATE(priv
, "LQ: MIMO2 toggle Antennas\n");
1850 if (tx_chains_num
<= 2)
1853 if (window
->success_ratio
>= IWL_RS_GOOD_RATIO
)
1856 memcpy(search_tbl
, tbl
, sz
);
1857 if (rs_toggle_antenna(valid_tx_ant
,
1858 &search_tbl
->current_rate
, search_tbl
)) {
1859 update_search_tbl_counter
= 1;
1863 case IWL_MIMO2_SWITCH_SISO_A
:
1864 case IWL_MIMO2_SWITCH_SISO_B
:
1865 case IWL_MIMO2_SWITCH_SISO_C
:
1866 IWL_DEBUG_RATE(priv
, "LQ: MIMO2 switch to SISO\n");
1868 /* Set up new search table for SISO */
1869 memcpy(search_tbl
, tbl
, sz
);
1871 if (tbl
->action
== IWL_MIMO2_SWITCH_SISO_A
)
1872 search_tbl
->ant_type
= ANT_A
;
1873 else if (tbl
->action
== IWL_MIMO2_SWITCH_SISO_B
)
1874 search_tbl
->ant_type
= ANT_B
;
1876 search_tbl
->ant_type
= ANT_C
;
1878 if (!rs_is_valid_ant(valid_tx_ant
, search_tbl
->ant_type
))
1881 ret
= rs_switch_to_siso(priv
, lq_sta
, conf
, sta
,
1888 case IWL_MIMO2_SWITCH_GI
:
1889 if (!tbl
->is_ht40
&& !(ht_cap
->cap
&
1890 IEEE80211_HT_CAP_SGI_20
))
1892 if (tbl
->is_ht40
&& !(ht_cap
->cap
&
1893 IEEE80211_HT_CAP_SGI_40
))
1896 IWL_DEBUG_RATE(priv
, "LQ: MIMO2 toggle SGI/NGI\n");
1898 /* Set up new search table for MIMO2 */
1899 memcpy(search_tbl
, tbl
, sz
);
1900 search_tbl
->is_SGI
= !tbl
->is_SGI
;
1901 rs_set_expected_tpt_table(lq_sta
, search_tbl
);
1903 * If active table already uses the fastest possible
1904 * modulation (dual stream with short guard interval),
1905 * and it's working well, there's no need to look
1906 * for a better type of modulation!
1909 s32 tpt
= lq_sta
->last_tpt
/ 100;
1910 if (tpt
>= search_tbl
->expected_tpt
[index
])
1913 search_tbl
->current_rate
=
1914 rate_n_flags_from_tbl(priv
, search_tbl
,
1916 update_search_tbl_counter
= 1;
1919 case IWL_MIMO2_SWITCH_MIMO3_ABC
:
1920 IWL_DEBUG_RATE(priv
, "LQ: MIMO2 switch to MIMO3\n");
1921 memcpy(search_tbl
, tbl
, sz
);
1922 search_tbl
->is_SGI
= 0;
1923 search_tbl
->ant_type
= ANT_ABC
;
1925 if (!rs_is_valid_ant(valid_tx_ant
, search_tbl
->ant_type
))
1928 ret
= rs_switch_to_mimo3(priv
, lq_sta
, conf
, sta
,
1936 if (tbl
->action
> IWL_MIMO2_SWITCH_MIMO3_ABC
)
1937 tbl
->action
= IWL_MIMO2_SWITCH_ANTENNA1
;
1939 if (tbl
->action
== start_action
)
1942 search_tbl
->lq_type
= LQ_NONE
;
1945 lq_sta
->search_better_tbl
= 1;
1947 if (tbl
->action
> IWL_MIMO2_SWITCH_MIMO3_ABC
)
1948 tbl
->action
= IWL_MIMO2_SWITCH_ANTENNA1
;
1949 if (update_search_tbl_counter
)
1950 search_tbl
->action
= tbl
->action
;
1957 * Try to switch to new modulation mode from MIMO3
1959 static int rs_move_mimo3_to_other(struct iwl_priv
*priv
,
1960 struct iwl_lq_sta
*lq_sta
,
1961 struct ieee80211_conf
*conf
,
1962 struct ieee80211_sta
*sta
, int index
)
1964 s8 is_green
= lq_sta
->is_green
;
1965 struct iwl_scale_tbl_info
*tbl
= &(lq_sta
->lq_info
[lq_sta
->active_tbl
]);
1966 struct iwl_scale_tbl_info
*search_tbl
=
1967 &(lq_sta
->lq_info
[(1 - lq_sta
->active_tbl
)]);
1968 struct iwl_rate_scale_data
*window
= &(tbl
->win
[index
]);
1969 struct ieee80211_sta_ht_cap
*ht_cap
= &sta
->ht_cap
;
1970 u32 sz
= (sizeof(struct iwl_scale_tbl_info
) -
1971 (sizeof(struct iwl_rate_scale_data
) * IWL_RATE_COUNT
));
1973 u8 valid_tx_ant
= hw_params(priv
).valid_tx_ant
;
1974 u8 tx_chains_num
= hw_params(priv
).tx_chains_num
;
1976 u8 update_search_tbl_counter
= 0;
1978 switch (priv
->bt_traffic_load
) {
1979 case IWL_BT_COEX_TRAFFIC_LOAD_NONE
:
1982 case IWL_BT_COEX_TRAFFIC_LOAD_HIGH
:
1983 case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS
:
1984 /* avoid antenna B and MIMO */
1985 if (tbl
->action
!= IWL_MIMO3_SWITCH_SISO_A
)
1986 tbl
->action
= IWL_MIMO3_SWITCH_SISO_A
;
1988 case IWL_BT_COEX_TRAFFIC_LOAD_LOW
:
1989 /* avoid antenna B unless MIMO */
1990 if (tbl
->action
== IWL_MIMO3_SWITCH_SISO_B
||
1991 tbl
->action
== IWL_MIMO3_SWITCH_SISO_C
)
1992 tbl
->action
= IWL_MIMO3_SWITCH_SISO_A
;
1995 IWL_ERR(priv
, "Invalid BT load %d", priv
->bt_traffic_load
);
1999 if ((iwl_tx_ant_restriction(priv
) == IWL_ANT_OK_SINGLE
) &&
2000 (tbl
->action
< IWL_MIMO3_SWITCH_SISO_A
||
2001 tbl
->action
> IWL_MIMO3_SWITCH_SISO_C
)) {
2002 /* switch in SISO */
2003 tbl
->action
= IWL_MIMO3_SWITCH_SISO_A
;
2006 /* configure as 1x1 if bt full concurrency */
2007 if (priv
->bt_full_concurrent
&&
2008 (tbl
->action
< IWL_MIMO3_SWITCH_SISO_A
||
2009 tbl
->action
> IWL_MIMO3_SWITCH_SISO_C
))
2010 tbl
->action
= IWL_MIMO3_SWITCH_SISO_A
;
2012 start_action
= tbl
->action
;
2014 lq_sta
->action_counter
++;
2015 switch (tbl
->action
) {
2016 case IWL_MIMO3_SWITCH_ANTENNA1
:
2017 case IWL_MIMO3_SWITCH_ANTENNA2
:
2018 IWL_DEBUG_RATE(priv
, "LQ: MIMO3 toggle Antennas\n");
2020 if (tx_chains_num
<= 3)
2023 if (window
->success_ratio
>= IWL_RS_GOOD_RATIO
)
2026 memcpy(search_tbl
, tbl
, sz
);
2027 if (rs_toggle_antenna(valid_tx_ant
,
2028 &search_tbl
->current_rate
, search_tbl
))
2031 case IWL_MIMO3_SWITCH_SISO_A
:
2032 case IWL_MIMO3_SWITCH_SISO_B
:
2033 case IWL_MIMO3_SWITCH_SISO_C
:
2034 IWL_DEBUG_RATE(priv
, "LQ: MIMO3 switch to SISO\n");
2036 /* Set up new search table for SISO */
2037 memcpy(search_tbl
, tbl
, sz
);
2039 if (tbl
->action
== IWL_MIMO3_SWITCH_SISO_A
)
2040 search_tbl
->ant_type
= ANT_A
;
2041 else if (tbl
->action
== IWL_MIMO3_SWITCH_SISO_B
)
2042 search_tbl
->ant_type
= ANT_B
;
2044 search_tbl
->ant_type
= ANT_C
;
2046 if (!rs_is_valid_ant(valid_tx_ant
, search_tbl
->ant_type
))
2049 ret
= rs_switch_to_siso(priv
, lq_sta
, conf
, sta
,
2056 case IWL_MIMO3_SWITCH_MIMO2_AB
:
2057 case IWL_MIMO3_SWITCH_MIMO2_AC
:
2058 case IWL_MIMO3_SWITCH_MIMO2_BC
:
2059 IWL_DEBUG_RATE(priv
, "LQ: MIMO3 switch to MIMO2\n");
2061 memcpy(search_tbl
, tbl
, sz
);
2062 search_tbl
->is_SGI
= 0;
2063 if (tbl
->action
== IWL_MIMO3_SWITCH_MIMO2_AB
)
2064 search_tbl
->ant_type
= ANT_AB
;
2065 else if (tbl
->action
== IWL_MIMO3_SWITCH_MIMO2_AC
)
2066 search_tbl
->ant_type
= ANT_AC
;
2068 search_tbl
->ant_type
= ANT_BC
;
2070 if (!rs_is_valid_ant(valid_tx_ant
, search_tbl
->ant_type
))
2073 ret
= rs_switch_to_mimo2(priv
, lq_sta
, conf
, sta
,
2080 case IWL_MIMO3_SWITCH_GI
:
2081 if (!tbl
->is_ht40
&& !(ht_cap
->cap
&
2082 IEEE80211_HT_CAP_SGI_20
))
2084 if (tbl
->is_ht40
&& !(ht_cap
->cap
&
2085 IEEE80211_HT_CAP_SGI_40
))
2088 IWL_DEBUG_RATE(priv
, "LQ: MIMO3 toggle SGI/NGI\n");
2090 /* Set up new search table for MIMO */
2091 memcpy(search_tbl
, tbl
, sz
);
2092 search_tbl
->is_SGI
= !tbl
->is_SGI
;
2093 rs_set_expected_tpt_table(lq_sta
, search_tbl
);
2095 * If active table already uses the fastest possible
2096 * modulation (dual stream with short guard interval),
2097 * and it's working well, there's no need to look
2098 * for a better type of modulation!
2101 s32 tpt
= lq_sta
->last_tpt
/ 100;
2102 if (tpt
>= search_tbl
->expected_tpt
[index
])
2105 search_tbl
->current_rate
=
2106 rate_n_flags_from_tbl(priv
, search_tbl
,
2108 update_search_tbl_counter
= 1;
2112 if (tbl
->action
> IWL_MIMO3_SWITCH_GI
)
2113 tbl
->action
= IWL_MIMO3_SWITCH_ANTENNA1
;
2115 if (tbl
->action
== start_action
)
2118 search_tbl
->lq_type
= LQ_NONE
;
2121 lq_sta
->search_better_tbl
= 1;
2123 if (tbl
->action
> IWL_MIMO3_SWITCH_GI
)
2124 tbl
->action
= IWL_MIMO3_SWITCH_ANTENNA1
;
2125 if (update_search_tbl_counter
)
2126 search_tbl
->action
= tbl
->action
;
2133 * Check whether we should continue using same modulation mode, or
2134 * begin search for a new mode, based on:
2135 * 1) # tx successes or failures while using this mode
2136 * 2) # times calling this function
2137 * 3) elapsed time in this mode (not used, for now)
2139 static void rs_stay_in_table(struct iwl_lq_sta
*lq_sta
, bool force_search
)
2141 struct iwl_scale_tbl_info
*tbl
;
2144 int flush_interval_passed
= 0;
2145 struct iwl_priv
*priv
;
2148 active_tbl
= lq_sta
->active_tbl
;
2150 tbl
= &(lq_sta
->lq_info
[active_tbl
]);
2152 /* If we've been disallowing search, see if we should now allow it */
2153 if (lq_sta
->stay_in_tbl
) {
2155 /* Elapsed time using current modulation mode */
2156 if (lq_sta
->flush_timer
)
2157 flush_interval_passed
=
2159 (unsigned long)(lq_sta
->flush_timer
+
2160 IWL_RATE_SCALE_FLUSH_INTVL
));
2163 * Check if we should allow search for new modulation mode.
2164 * If many frames have failed or succeeded, or we've used
2165 * this same modulation for a long time, allow search, and
2166 * reset history stats that keep track of whether we should
2167 * allow a new search. Also (below) reset all bitmaps and
2168 * stats in active history.
2171 (lq_sta
->total_failed
> lq_sta
->max_failure_limit
) ||
2172 (lq_sta
->total_success
> lq_sta
->max_success_limit
) ||
2173 ((!lq_sta
->search_better_tbl
) && (lq_sta
->flush_timer
)
2174 && (flush_interval_passed
))) {
2175 IWL_DEBUG_RATE(priv
, "LQ: stay is expired %d %d %d\n:",
2176 lq_sta
->total_failed
,
2177 lq_sta
->total_success
,
2178 flush_interval_passed
);
2180 /* Allow search for new mode */
2181 lq_sta
->stay_in_tbl
= 0; /* only place reset */
2182 lq_sta
->total_failed
= 0;
2183 lq_sta
->total_success
= 0;
2184 lq_sta
->flush_timer
= 0;
2187 * Else if we've used this modulation mode enough repetitions
2188 * (regardless of elapsed time or success/failure), reset
2189 * history bitmaps and rate-specific stats for all rates in
2193 lq_sta
->table_count
++;
2194 if (lq_sta
->table_count
>=
2195 lq_sta
->table_count_limit
) {
2196 lq_sta
->table_count
= 0;
2198 IWL_DEBUG_RATE(priv
, "LQ: stay in table clear win\n");
2199 for (i
= 0; i
< IWL_RATE_COUNT
; i
++)
2200 rs_rate_scale_clear_window(
2205 /* If transitioning to allow "search", reset all history
2206 * bitmaps and stats in active table (this will become the new
2207 * "search" table). */
2208 if (!lq_sta
->stay_in_tbl
) {
2209 for (i
= 0; i
< IWL_RATE_COUNT
; i
++)
2210 rs_rate_scale_clear_window(&(tbl
->win
[i
]));
2216 * setup rate table in uCode
2218 static void rs_update_rate_tbl(struct iwl_priv
*priv
,
2219 struct iwl_rxon_context
*ctx
,
2220 struct iwl_lq_sta
*lq_sta
,
2221 struct iwl_scale_tbl_info
*tbl
,
2222 int index
, u8 is_green
)
2226 /* Update uCode's rate table. */
2227 rate
= rate_n_flags_from_tbl(priv
, tbl
, index
, is_green
);
2228 rs_fill_link_cmd(priv
, lq_sta
, rate
);
2229 iwl_send_lq_cmd(priv
, ctx
, &lq_sta
->lq
, CMD_ASYNC
, false);
2233 * Do rate scaling and search for new modulation mode.
2235 static void rs_rate_scale_perform(struct iwl_priv
*priv
,
2236 struct sk_buff
*skb
,
2237 struct ieee80211_sta
*sta
,
2238 struct iwl_lq_sta
*lq_sta
)
2240 struct ieee80211_hw
*hw
= priv
->hw
;
2241 struct ieee80211_conf
*conf
= &hw
->conf
;
2242 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
2243 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)skb
->data
;
2244 int low
= IWL_RATE_INVALID
;
2245 int high
= IWL_RATE_INVALID
;
2248 struct iwl_rate_scale_data
*window
= NULL
;
2249 int current_tpt
= IWL_INVALID_VALUE
;
2250 int low_tpt
= IWL_INVALID_VALUE
;
2251 int high_tpt
= IWL_INVALID_VALUE
;
2253 s8 scale_action
= 0;
2256 struct iwl_scale_tbl_info
*tbl
, *tbl1
;
2257 u16 rate_scale_index_msk
= 0;
2263 u8 tid
= IWL_MAX_TID_COUNT
;
2264 struct iwl_tid_data
*tid_data
;
2265 struct iwl_station_priv
*sta_priv
= (void *)sta
->drv_priv
;
2266 struct iwl_rxon_context
*ctx
= sta_priv
->common
.ctx
;
2268 IWL_DEBUG_RATE(priv
, "rate scale calculate new rate for skb\n");
2270 /* Send management frames and NO_ACK data using lowest rate. */
2271 /* TODO: this could probably be improved.. */
2272 if (!ieee80211_is_data(hdr
->frame_control
) ||
2273 info
->flags
& IEEE80211_TX_CTL_NO_ACK
)
2276 if (!sta
|| !lq_sta
)
2279 lq_sta
->supp_rates
= sta
->supp_rates
[lq_sta
->band
];
2281 tid
= rs_tl_add_packet(lq_sta
, hdr
);
2282 if ((tid
!= IWL_MAX_TID_COUNT
) &&
2283 (lq_sta
->tx_agg_tid_en
& (1 << tid
))) {
2284 tid_data
= &priv
->shrd
->tid_data
[lq_sta
->lq
.sta_id
][tid
];
2285 if (tid_data
->agg
.state
== IWL_AGG_OFF
)
2293 * Select rate-scale / modulation-mode table to work with in
2294 * the rest of this function: "search" if searching for better
2295 * modulation mode, or "active" if doing rate scaling within a mode.
2297 if (!lq_sta
->search_better_tbl
)
2298 active_tbl
= lq_sta
->active_tbl
;
2300 active_tbl
= 1 - lq_sta
->active_tbl
;
2302 tbl
= &(lq_sta
->lq_info
[active_tbl
]);
2303 if (is_legacy(tbl
->lq_type
))
2304 lq_sta
->is_green
= 0;
2306 lq_sta
->is_green
= rs_use_green(sta
);
2307 is_green
= lq_sta
->is_green
;
2309 /* current tx rate */
2310 index
= lq_sta
->last_txrate_idx
;
2312 IWL_DEBUG_RATE(priv
, "Rate scale index %d for type %d\n", index
,
2315 /* rates available for this association, and for modulation mode */
2316 rate_mask
= rs_get_supported_rates(lq_sta
, hdr
, tbl
->lq_type
);
2318 IWL_DEBUG_RATE(priv
, "mask 0x%04X\n", rate_mask
);
2320 /* mask with station rate restriction */
2321 if (is_legacy(tbl
->lq_type
)) {
2322 if (lq_sta
->band
== IEEE80211_BAND_5GHZ
)
2323 /* supp_rates has no CCK bits in A mode */
2324 rate_scale_index_msk
= (u16
) (rate_mask
&
2325 (lq_sta
->supp_rates
<< IWL_FIRST_OFDM_RATE
));
2327 rate_scale_index_msk
= (u16
) (rate_mask
&
2328 lq_sta
->supp_rates
);
2331 rate_scale_index_msk
= rate_mask
;
2333 if (!rate_scale_index_msk
)
2334 rate_scale_index_msk
= rate_mask
;
2336 if (!((1 << index
) & rate_scale_index_msk
)) {
2337 IWL_ERR(priv
, "Current Rate is not valid\n");
2338 if (lq_sta
->search_better_tbl
) {
2339 /* revert to active table if search table is not valid*/
2340 tbl
->lq_type
= LQ_NONE
;
2341 lq_sta
->search_better_tbl
= 0;
2342 tbl
= &(lq_sta
->lq_info
[lq_sta
->active_tbl
]);
2343 /* get "active" rate info */
2344 index
= iwl_hwrate_to_plcp_idx(tbl
->current_rate
);
2345 rs_update_rate_tbl(priv
, ctx
, lq_sta
, tbl
,
2351 /* Get expected throughput table and history window for current rate */
2352 if (!tbl
->expected_tpt
) {
2353 IWL_ERR(priv
, "tbl->expected_tpt is NULL\n");
2357 /* force user max rate if set by user */
2358 if ((lq_sta
->max_rate_idx
!= -1) &&
2359 (lq_sta
->max_rate_idx
< index
)) {
2360 index
= lq_sta
->max_rate_idx
;
2362 window
= &(tbl
->win
[index
]);
2366 window
= &(tbl
->win
[index
]);
2369 * If there is not enough history to calculate actual average
2370 * throughput, keep analyzing results of more tx frames, without
2371 * changing rate or mode (bypass most of the rest of this function).
2372 * Set up new rate table in uCode only if old rate is not supported
2373 * in current association (use new rate found above).
2375 fail_count
= window
->counter
- window
->success_counter
;
2376 if ((fail_count
< IWL_RATE_MIN_FAILURE_TH
) &&
2377 (window
->success_counter
< IWL_RATE_MIN_SUCCESS_TH
)) {
2378 IWL_DEBUG_RATE(priv
, "LQ: still below TH. succ=%d total=%d "
2380 window
->success_counter
, window
->counter
, index
);
2382 /* Can't calculate this yet; not enough history */
2383 window
->average_tpt
= IWL_INVALID_VALUE
;
2385 /* Should we stay with this modulation mode,
2386 * or search for a new one? */
2387 rs_stay_in_table(lq_sta
, false);
2391 /* Else we have enough samples; calculate estimate of
2392 * actual average throughput */
2393 if (window
->average_tpt
!= ((window
->success_ratio
*
2394 tbl
->expected_tpt
[index
] + 64) / 128)) {
2395 IWL_ERR(priv
, "expected_tpt should have been calculated by now\n");
2396 window
->average_tpt
= ((window
->success_ratio
*
2397 tbl
->expected_tpt
[index
] + 64) / 128);
2400 /* If we are searching for better modulation mode, check success. */
2401 if (lq_sta
->search_better_tbl
&&
2402 (iwl_tx_ant_restriction(priv
) == IWL_ANT_OK_MULTI
)) {
2403 /* If good success, continue using the "search" mode;
2404 * no need to send new link quality command, since we're
2405 * continuing to use the setup that we've been trying. */
2406 if (window
->average_tpt
> lq_sta
->last_tpt
) {
2408 IWL_DEBUG_RATE(priv
, "LQ: SWITCHING TO NEW TABLE "
2409 "suc=%d cur-tpt=%d old-tpt=%d\n",
2410 window
->success_ratio
,
2411 window
->average_tpt
,
2414 if (!is_legacy(tbl
->lq_type
))
2415 lq_sta
->enable_counter
= 1;
2417 /* Swap tables; "search" becomes "active" */
2418 lq_sta
->active_tbl
= active_tbl
;
2419 current_tpt
= window
->average_tpt
;
2421 /* Else poor success; go back to mode in "active" table */
2424 IWL_DEBUG_RATE(priv
, "LQ: GOING BACK TO THE OLD TABLE "
2425 "suc=%d cur-tpt=%d old-tpt=%d\n",
2426 window
->success_ratio
,
2427 window
->average_tpt
,
2430 /* Nullify "search" table */
2431 tbl
->lq_type
= LQ_NONE
;
2433 /* Revert to "active" table */
2434 active_tbl
= lq_sta
->active_tbl
;
2435 tbl
= &(lq_sta
->lq_info
[active_tbl
]);
2437 /* Revert to "active" rate and throughput info */
2438 index
= iwl_hwrate_to_plcp_idx(tbl
->current_rate
);
2439 current_tpt
= lq_sta
->last_tpt
;
2441 /* Need to set up a new rate table in uCode */
2445 /* Either way, we've made a decision; modulation mode
2446 * search is done, allow rate adjustment next time. */
2447 lq_sta
->search_better_tbl
= 0;
2448 done_search
= 1; /* Don't switch modes below! */
2452 /* (Else) not in search of better modulation mode, try for better
2453 * starting rate, while staying in this mode. */
2454 high_low
= rs_get_adjacent_rate(priv
, index
, rate_scale_index_msk
,
2456 low
= high_low
& 0xff;
2457 high
= (high_low
>> 8) & 0xff;
2459 /* If user set max rate, dont allow higher than user constrain */
2460 if ((lq_sta
->max_rate_idx
!= -1) &&
2461 (lq_sta
->max_rate_idx
< high
))
2462 high
= IWL_RATE_INVALID
;
2464 sr
= window
->success_ratio
;
2466 /* Collect measured throughputs for current and adjacent rates */
2467 current_tpt
= window
->average_tpt
;
2468 if (low
!= IWL_RATE_INVALID
)
2469 low_tpt
= tbl
->win
[low
].average_tpt
;
2470 if (high
!= IWL_RATE_INVALID
)
2471 high_tpt
= tbl
->win
[high
].average_tpt
;
2475 /* Too many failures, decrease rate */
2476 if ((sr
<= IWL_RATE_DECREASE_TH
) || (current_tpt
== 0)) {
2477 IWL_DEBUG_RATE(priv
, "decrease rate because of low success_ratio\n");
2480 /* No throughput measured yet for adjacent rates; try increase. */
2481 } else if ((low_tpt
== IWL_INVALID_VALUE
) &&
2482 (high_tpt
== IWL_INVALID_VALUE
)) {
2484 if (high
!= IWL_RATE_INVALID
&& sr
>= IWL_RATE_INCREASE_TH
)
2486 else if (low
!= IWL_RATE_INVALID
)
2490 /* Both adjacent throughputs are measured, but neither one has better
2491 * throughput; we're using the best rate, don't change it! */
2492 else if ((low_tpt
!= IWL_INVALID_VALUE
) &&
2493 (high_tpt
!= IWL_INVALID_VALUE
) &&
2494 (low_tpt
< current_tpt
) &&
2495 (high_tpt
< current_tpt
))
2498 /* At least one adjacent rate's throughput is measured,
2499 * and may have better performance. */
2501 /* Higher adjacent rate's throughput is measured */
2502 if (high_tpt
!= IWL_INVALID_VALUE
) {
2503 /* Higher rate has better throughput */
2504 if (high_tpt
> current_tpt
&&
2505 sr
>= IWL_RATE_INCREASE_TH
) {
2511 /* Lower adjacent rate's throughput is measured */
2512 } else if (low_tpt
!= IWL_INVALID_VALUE
) {
2513 /* Lower rate has better throughput */
2514 if (low_tpt
> current_tpt
) {
2515 IWL_DEBUG_RATE(priv
,
2516 "decrease rate because of low tpt\n");
2518 } else if (sr
>= IWL_RATE_INCREASE_TH
) {
2524 /* Sanity check; asked for decrease, but success rate or throughput
2525 * has been good at old rate. Don't change it. */
2526 if ((scale_action
== -1) && (low
!= IWL_RATE_INVALID
) &&
2527 ((sr
> IWL_RATE_HIGH_TH
) ||
2528 (current_tpt
> (100 * tbl
->expected_tpt
[low
]))))
2530 if (!iwl_ht_enabled(priv
) && !is_legacy(tbl
->lq_type
))
2532 if (iwl_tx_ant_restriction(priv
) != IWL_ANT_OK_MULTI
&&
2533 (is_mimo2(tbl
->lq_type
) || is_mimo3(tbl
->lq_type
)))
2536 if ((priv
->bt_traffic_load
>= IWL_BT_COEX_TRAFFIC_LOAD_HIGH
) &&
2537 (is_mimo2(tbl
->lq_type
) || is_mimo3(tbl
->lq_type
))) {
2538 if (lq_sta
->last_bt_traffic
> priv
->bt_traffic_load
) {
2540 * don't set scale_action, don't want to scale up if
2541 * the rate scale doesn't otherwise think that is a
2544 } else if (lq_sta
->last_bt_traffic
<= priv
->bt_traffic_load
) {
2548 lq_sta
->last_bt_traffic
= priv
->bt_traffic_load
;
2550 if ((priv
->bt_traffic_load
>= IWL_BT_COEX_TRAFFIC_LOAD_HIGH
) &&
2551 (is_mimo2(tbl
->lq_type
) || is_mimo3(tbl
->lq_type
))) {
2552 /* search for a new modulation */
2553 rs_stay_in_table(lq_sta
, true);
2557 switch (scale_action
) {
2559 /* Decrease starting rate, update uCode's rate table */
2560 if (low
!= IWL_RATE_INVALID
) {
2567 /* Increase starting rate, update uCode's rate table */
2568 if (high
!= IWL_RATE_INVALID
) {
2580 IWL_DEBUG_RATE(priv
, "choose rate scale index %d action %d low %d "
2581 "high %d type %d\n",
2582 index
, scale_action
, low
, high
, tbl
->lq_type
);
2585 /* Replace uCode's rate table for the destination station. */
2587 rs_update_rate_tbl(priv
, ctx
, lq_sta
, tbl
, index
, is_green
);
2589 if (iwl_tx_ant_restriction(priv
) == IWL_ANT_OK_MULTI
) {
2590 /* Should we stay with this modulation mode,
2591 * or search for a new one? */
2592 rs_stay_in_table(lq_sta
, false);
2595 * Search for new modulation mode if we're:
2596 * 1) Not changing rates right now
2597 * 2) Not just finishing up a search
2598 * 3) Allowing a new search
2600 if (!update_lq
&& !done_search
&& !lq_sta
->stay_in_tbl
&& window
->counter
) {
2601 /* Save current throughput to compare with "search" throughput*/
2602 lq_sta
->last_tpt
= current_tpt
;
2604 /* Select a new "search" modulation mode to try.
2605 * If one is found, set up the new "search" table. */
2606 if (is_legacy(tbl
->lq_type
))
2607 rs_move_legacy_other(priv
, lq_sta
, conf
, sta
, index
);
2608 else if (is_siso(tbl
->lq_type
))
2609 rs_move_siso_to_other(priv
, lq_sta
, conf
, sta
, index
);
2610 else if (is_mimo2(tbl
->lq_type
))
2611 rs_move_mimo2_to_other(priv
, lq_sta
, conf
, sta
, index
);
2613 rs_move_mimo3_to_other(priv
, lq_sta
, conf
, sta
, index
);
2615 /* If new "search" mode was selected, set up in uCode table */
2616 if (lq_sta
->search_better_tbl
) {
2617 /* Access the "search" table, clear its history. */
2618 tbl
= &(lq_sta
->lq_info
[(1 - lq_sta
->active_tbl
)]);
2619 for (i
= 0; i
< IWL_RATE_COUNT
; i
++)
2620 rs_rate_scale_clear_window(&(tbl
->win
[i
]));
2622 /* Use new "search" start rate */
2623 index
= iwl_hwrate_to_plcp_idx(tbl
->current_rate
);
2625 IWL_DEBUG_RATE(priv
, "Switch current mcs: %X index: %d\n",
2626 tbl
->current_rate
, index
);
2627 rs_fill_link_cmd(priv
, lq_sta
, tbl
->current_rate
);
2628 iwl_send_lq_cmd(priv
, ctx
, &lq_sta
->lq
, CMD_ASYNC
, false);
2633 if (done_search
&& !lq_sta
->stay_in_tbl
) {
2634 /* If the "active" (non-search) mode was legacy,
2635 * and we've tried switching antennas,
2636 * but we haven't been able to try HT modes (not available),
2637 * stay with best antenna legacy modulation for a while
2638 * before next round of mode comparisons. */
2639 tbl1
= &(lq_sta
->lq_info
[lq_sta
->active_tbl
]);
2640 if (is_legacy(tbl1
->lq_type
) && !conf_is_ht(conf
) &&
2641 lq_sta
->action_counter
> tbl1
->max_search
) {
2642 IWL_DEBUG_RATE(priv
, "LQ: STAY in legacy table\n");
2643 rs_set_stay_in_table(priv
, 1, lq_sta
);
2646 /* If we're in an HT mode, and all 3 mode switch actions
2647 * have been tried and compared, stay in this best modulation
2648 * mode for a while before next round of mode comparisons. */
2649 if (lq_sta
->enable_counter
&&
2650 (lq_sta
->action_counter
>= tbl1
->max_search
) &&
2651 iwl_ht_enabled(priv
)) {
2652 if ((lq_sta
->last_tpt
> IWL_AGG_TPT_THREHOLD
) &&
2653 (lq_sta
->tx_agg_tid_en
& (1 << tid
)) &&
2654 (tid
!= IWL_MAX_TID_COUNT
)) {
2655 u8 sta_id
= lq_sta
->lq
.sta_id
;
2657 &priv
->shrd
->tid_data
[sta_id
][tid
];
2658 if (tid_data
->agg
.state
== IWL_AGG_OFF
) {
2659 IWL_DEBUG_RATE(priv
,
2660 "try to aggregate tid %d\n",
2662 rs_tl_turn_on_agg(priv
, tid
,
2666 rs_set_stay_in_table(priv
, 0, lq_sta
);
2671 tbl
->current_rate
= rate_n_flags_from_tbl(priv
, tbl
, index
, is_green
);
2673 lq_sta
->last_txrate_idx
= i
;
2677 * rs_initialize_lq - Initialize a station's hardware rate table
2679 * The uCode's station table contains a table of fallback rates
2680 * for automatic fallback during transmission.
2682 * NOTE: This sets up a default set of values. These will be replaced later
2683 * if the driver's iwl-agn-rs rate scaling algorithm is used, instead of
2686 * NOTE: Run REPLY_ADD_STA command to set up station table entry, before
2687 * calling this function (which runs REPLY_TX_LINK_QUALITY_CMD,
2688 * which requires station table entry to exist).
2690 static void rs_initialize_lq(struct iwl_priv
*priv
,
2691 struct ieee80211_conf
*conf
,
2692 struct ieee80211_sta
*sta
,
2693 struct iwl_lq_sta
*lq_sta
)
2695 struct iwl_scale_tbl_info
*tbl
;
2699 u8 use_green
= rs_use_green(sta
);
2702 struct iwl_station_priv
*sta_priv
;
2703 struct iwl_rxon_context
*ctx
;
2705 if (!sta
|| !lq_sta
)
2708 sta_priv
= (void *)sta
->drv_priv
;
2709 ctx
= sta_priv
->common
.ctx
;
2711 i
= lq_sta
->last_txrate_idx
;
2713 valid_tx_ant
= hw_params(priv
).valid_tx_ant
;
2715 if (!lq_sta
->search_better_tbl
)
2716 active_tbl
= lq_sta
->active_tbl
;
2718 active_tbl
= 1 - lq_sta
->active_tbl
;
2720 tbl
= &(lq_sta
->lq_info
[active_tbl
]);
2722 if ((i
< 0) || (i
>= IWL_RATE_COUNT
))
2725 rate
= iwl_rates
[i
].plcp
;
2726 tbl
->ant_type
= first_antenna(valid_tx_ant
);
2727 rate
|= tbl
->ant_type
<< RATE_MCS_ANT_POS
;
2729 if (i
>= IWL_FIRST_CCK_RATE
&& i
<= IWL_LAST_CCK_RATE
)
2730 rate
|= RATE_MCS_CCK_MSK
;
2732 rs_get_tbl_info_from_mcs(rate
, priv
->band
, tbl
, &rate_idx
);
2733 if (!rs_is_valid_ant(valid_tx_ant
, tbl
->ant_type
))
2734 rs_toggle_antenna(valid_tx_ant
, &rate
, tbl
);
2736 rate
= rate_n_flags_from_tbl(priv
, tbl
, rate_idx
, use_green
);
2737 tbl
->current_rate
= rate
;
2738 rs_set_expected_tpt_table(lq_sta
, tbl
);
2739 rs_fill_link_cmd(NULL
, lq_sta
, rate
);
2740 priv
->stations
[lq_sta
->lq
.sta_id
].lq
= &lq_sta
->lq
;
2741 iwl_send_lq_cmd(priv
, ctx
, &lq_sta
->lq
, CMD_SYNC
, true);
2744 static void rs_get_rate(void *priv_r
, struct ieee80211_sta
*sta
, void *priv_sta
,
2745 struct ieee80211_tx_rate_control
*txrc
)
2748 struct sk_buff
*skb
= txrc
->skb
;
2749 struct ieee80211_supported_band
*sband
= txrc
->sband
;
2750 struct iwl_priv
*priv __maybe_unused
= (struct iwl_priv
*)priv_r
;
2751 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
2752 struct iwl_lq_sta
*lq_sta
= priv_sta
;
2755 IWL_DEBUG_RATE_LIMIT(priv
, "rate scale calculate new rate for skb\n");
2757 /* Get max rate if user set max rate */
2759 lq_sta
->max_rate_idx
= txrc
->max_rate_idx
;
2760 if ((sband
->band
== IEEE80211_BAND_5GHZ
) &&
2761 (lq_sta
->max_rate_idx
!= -1))
2762 lq_sta
->max_rate_idx
+= IWL_FIRST_OFDM_RATE
;
2763 if ((lq_sta
->max_rate_idx
< 0) ||
2764 (lq_sta
->max_rate_idx
>= IWL_RATE_COUNT
))
2765 lq_sta
->max_rate_idx
= -1;
2768 /* Treat uninitialized rate scaling data same as non-existing. */
2769 if (lq_sta
&& !lq_sta
->drv
) {
2770 IWL_DEBUG_RATE(priv
, "Rate scaling not initialized yet.\n");
2774 /* Send management frames and NO_ACK data using lowest rate. */
2775 if (rate_control_send_low(sta
, priv_sta
, txrc
))
2778 rate_idx
= lq_sta
->last_txrate_idx
;
2780 if (lq_sta
->last_rate_n_flags
& RATE_MCS_HT_MSK
) {
2781 rate_idx
-= IWL_FIRST_OFDM_RATE
;
2782 /* 6M and 9M shared same MCS index */
2783 rate_idx
= (rate_idx
> 0) ? (rate_idx
- 1) : 0;
2784 if (rs_extract_rate(lq_sta
->last_rate_n_flags
) >=
2785 IWL_RATE_MIMO3_6M_PLCP
)
2786 rate_idx
= rate_idx
+ (2 * MCS_INDEX_PER_STREAM
);
2787 else if (rs_extract_rate(lq_sta
->last_rate_n_flags
) >=
2788 IWL_RATE_MIMO2_6M_PLCP
)
2789 rate_idx
= rate_idx
+ MCS_INDEX_PER_STREAM
;
2790 info
->control
.rates
[0].flags
= IEEE80211_TX_RC_MCS
;
2791 if (lq_sta
->last_rate_n_flags
& RATE_MCS_SGI_MSK
)
2792 info
->control
.rates
[0].flags
|= IEEE80211_TX_RC_SHORT_GI
;
2793 if (lq_sta
->last_rate_n_flags
& RATE_MCS_DUP_MSK
)
2794 info
->control
.rates
[0].flags
|= IEEE80211_TX_RC_DUP_DATA
;
2795 if (lq_sta
->last_rate_n_flags
& RATE_MCS_HT40_MSK
)
2796 info
->control
.rates
[0].flags
|= IEEE80211_TX_RC_40_MHZ_WIDTH
;
2797 if (lq_sta
->last_rate_n_flags
& RATE_MCS_GF_MSK
)
2798 info
->control
.rates
[0].flags
|= IEEE80211_TX_RC_GREEN_FIELD
;
2800 /* Check for invalid rates */
2801 if ((rate_idx
< 0) || (rate_idx
>= IWL_RATE_COUNT_LEGACY
) ||
2802 ((sband
->band
== IEEE80211_BAND_5GHZ
) &&
2803 (rate_idx
< IWL_FIRST_OFDM_RATE
)))
2804 rate_idx
= rate_lowest_index(sband
, sta
);
2805 /* On valid 5 GHz rate, adjust index */
2806 else if (sband
->band
== IEEE80211_BAND_5GHZ
)
2807 rate_idx
-= IWL_FIRST_OFDM_RATE
;
2808 info
->control
.rates
[0].flags
= 0;
2810 info
->control
.rates
[0].idx
= rate_idx
;
2814 static void *rs_alloc_sta(void *priv_rate
, struct ieee80211_sta
*sta
,
2817 struct iwl_station_priv
*sta_priv
= (struct iwl_station_priv
*) sta
->drv_priv
;
2818 struct iwl_priv
*priv
;
2820 priv
= (struct iwl_priv
*)priv_rate
;
2821 IWL_DEBUG_RATE(priv
, "create station rate scale window\n");
2823 return &sta_priv
->lq_sta
;
2827 * Called after adding a new station to initialize rate scaling
2829 void iwl_rs_rate_init(struct iwl_priv
*priv
, struct ieee80211_sta
*sta
, u8 sta_id
)
2832 struct ieee80211_hw
*hw
= priv
->hw
;
2833 struct ieee80211_conf
*conf
= &priv
->hw
->conf
;
2834 struct ieee80211_sta_ht_cap
*ht_cap
= &sta
->ht_cap
;
2835 struct iwl_station_priv
*sta_priv
;
2836 struct iwl_lq_sta
*lq_sta
;
2837 struct ieee80211_supported_band
*sband
;
2839 sta_priv
= (struct iwl_station_priv
*) sta
->drv_priv
;
2840 lq_sta
= &sta_priv
->lq_sta
;
2841 sband
= hw
->wiphy
->bands
[conf
->channel
->band
];
2844 lq_sta
->lq
.sta_id
= sta_id
;
2846 for (j
= 0; j
< LQ_SIZE
; j
++)
2847 for (i
= 0; i
< IWL_RATE_COUNT
; i
++)
2848 rs_rate_scale_clear_window(&lq_sta
->lq_info
[j
].win
[i
]);
2850 lq_sta
->flush_timer
= 0;
2851 lq_sta
->supp_rates
= sta
->supp_rates
[sband
->band
];
2852 for (j
= 0; j
< LQ_SIZE
; j
++)
2853 for (i
= 0; i
< IWL_RATE_COUNT
; i
++)
2854 rs_rate_scale_clear_window(&lq_sta
->lq_info
[j
].win
[i
]);
2856 IWL_DEBUG_RATE(priv
, "LQ: *** rate scale station global init for station %d ***\n",
2858 /* TODO: what is a good starting rate for STA? About middle? Maybe not
2859 * the lowest or the highest rate.. Could consider using RSSI from
2860 * previous packets? Need to have IEEE 802.1X auth succeed immediately
2864 lq_sta
->max_rate_idx
= -1;
2865 lq_sta
->missed_rate_counter
= IWL_MISSED_RATE_MAX
;
2866 lq_sta
->is_green
= rs_use_green(sta
);
2867 lq_sta
->active_legacy_rate
= priv
->active_rate
& ~(0x1000);
2868 lq_sta
->band
= priv
->band
;
2870 * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3),
2871 * supp_rates[] does not; shift to convert format, force 9 MBits off.
2873 lq_sta
->active_siso_rate
= ht_cap
->mcs
.rx_mask
[0] << 1;
2874 lq_sta
->active_siso_rate
|= ht_cap
->mcs
.rx_mask
[0] & 0x1;
2875 lq_sta
->active_siso_rate
&= ~((u16
)0x2);
2876 lq_sta
->active_siso_rate
<<= IWL_FIRST_OFDM_RATE
;
2879 lq_sta
->active_mimo2_rate
= ht_cap
->mcs
.rx_mask
[1] << 1;
2880 lq_sta
->active_mimo2_rate
|= ht_cap
->mcs
.rx_mask
[1] & 0x1;
2881 lq_sta
->active_mimo2_rate
&= ~((u16
)0x2);
2882 lq_sta
->active_mimo2_rate
<<= IWL_FIRST_OFDM_RATE
;
2884 lq_sta
->active_mimo3_rate
= ht_cap
->mcs
.rx_mask
[2] << 1;
2885 lq_sta
->active_mimo3_rate
|= ht_cap
->mcs
.rx_mask
[2] & 0x1;
2886 lq_sta
->active_mimo3_rate
&= ~((u16
)0x2);
2887 lq_sta
->active_mimo3_rate
<<= IWL_FIRST_OFDM_RATE
;
2889 IWL_DEBUG_RATE(priv
, "SISO-RATE=%X MIMO2-RATE=%X MIMO3-RATE=%X\n",
2890 lq_sta
->active_siso_rate
,
2891 lq_sta
->active_mimo2_rate
,
2892 lq_sta
->active_mimo3_rate
);
2894 /* These values will be overridden later */
2895 lq_sta
->lq
.general_params
.single_stream_ant_msk
=
2896 first_antenna(hw_params(priv
).valid_tx_ant
);
2897 lq_sta
->lq
.general_params
.dual_stream_ant_msk
=
2898 hw_params(priv
).valid_tx_ant
&
2899 ~first_antenna(hw_params(priv
).valid_tx_ant
);
2900 if (!lq_sta
->lq
.general_params
.dual_stream_ant_msk
) {
2901 lq_sta
->lq
.general_params
.dual_stream_ant_msk
= ANT_AB
;
2902 } else if (num_of_ant(hw_params(priv
).valid_tx_ant
) == 2) {
2903 lq_sta
->lq
.general_params
.dual_stream_ant_msk
=
2904 hw_params(priv
).valid_tx_ant
;
2907 /* as default allow aggregation for all tids */
2908 lq_sta
->tx_agg_tid_en
= IWL_AGG_ALL_TID
;
2911 /* Set last_txrate_idx to lowest rate */
2912 lq_sta
->last_txrate_idx
= rate_lowest_index(sband
, sta
);
2913 if (sband
->band
== IEEE80211_BAND_5GHZ
)
2914 lq_sta
->last_txrate_idx
+= IWL_FIRST_OFDM_RATE
;
2916 #ifdef CONFIG_IWLWIFI_DEVICE_SVTOOL
2917 priv
->tm_fixed_rate
= 0;
2919 #ifdef CONFIG_MAC80211_DEBUGFS
2920 lq_sta
->dbg_fixed_rate
= 0;
2923 rs_initialize_lq(priv
, conf
, sta
, lq_sta
);
2926 static void rs_fill_link_cmd(struct iwl_priv
*priv
,
2927 struct iwl_lq_sta
*lq_sta
, u32 new_rate
)
2929 struct iwl_scale_tbl_info tbl_type
;
2932 int repeat_rate
= 0;
2933 u8 ant_toggle_cnt
= 0;
2934 u8 use_ht_possible
= 1;
2935 u8 valid_tx_ant
= 0;
2936 struct iwl_station_priv
*sta_priv
=
2937 container_of(lq_sta
, struct iwl_station_priv
, lq_sta
);
2938 struct iwl_link_quality_cmd
*lq_cmd
= &lq_sta
->lq
;
2940 /* Override starting rate (index 0) if needed for debug purposes */
2941 rs_dbgfs_set_mcs(lq_sta
, &new_rate
, index
);
2943 /* Interpret new_rate (rate_n_flags) */
2944 rs_get_tbl_info_from_mcs(new_rate
, lq_sta
->band
,
2945 &tbl_type
, &rate_idx
);
2947 if (priv
&& priv
->bt_full_concurrent
) {
2950 first_antenna(hw_params(priv
).valid_tx_ant
);
2953 /* How many times should we repeat the initial rate? */
2954 if (is_legacy(tbl_type
.lq_type
)) {
2956 repeat_rate
= IWL_NUMBER_TRY
;
2958 repeat_rate
= min(IWL_HT_NUMBER_TRY
,
2959 LINK_QUAL_AGG_DISABLE_START_DEF
- 1);
2962 lq_cmd
->general_params
.mimo_delimiter
=
2963 is_mimo(tbl_type
.lq_type
) ? 1 : 0;
2965 /* Fill 1st table entry (index 0) */
2966 lq_cmd
->rs_table
[index
].rate_n_flags
= cpu_to_le32(new_rate
);
2968 if (num_of_ant(tbl_type
.ant_type
) == 1) {
2969 lq_cmd
->general_params
.single_stream_ant_msk
=
2971 } else if (num_of_ant(tbl_type
.ant_type
) == 2) {
2972 lq_cmd
->general_params
.dual_stream_ant_msk
=
2974 } /* otherwise we don't modify the existing value */
2979 if (priv
->bt_full_concurrent
)
2980 valid_tx_ant
= ANT_A
;
2982 valid_tx_ant
= hw_params(priv
).valid_tx_ant
;
2985 /* Fill rest of rate table */
2986 while (index
< LINK_QUAL_MAX_RETRY_NUM
) {
2987 /* Repeat initial/next rate.
2988 * For legacy IWL_NUMBER_TRY == 1, this loop will not execute.
2989 * For HT IWL_HT_NUMBER_TRY == 3, this executes twice. */
2990 while (repeat_rate
> 0 && (index
< LINK_QUAL_MAX_RETRY_NUM
)) {
2991 if (is_legacy(tbl_type
.lq_type
)) {
2992 if (ant_toggle_cnt
< NUM_TRY_BEFORE_ANT_TOGGLE
)
2995 rs_toggle_antenna(valid_tx_ant
,
2996 &new_rate
, &tbl_type
))
3000 /* Override next rate if needed for debug purposes */
3001 rs_dbgfs_set_mcs(lq_sta
, &new_rate
, index
);
3003 /* Fill next table entry */
3004 lq_cmd
->rs_table
[index
].rate_n_flags
=
3005 cpu_to_le32(new_rate
);
3010 rs_get_tbl_info_from_mcs(new_rate
, lq_sta
->band
, &tbl_type
,
3013 if (priv
&& priv
->bt_full_concurrent
) {
3016 first_antenna(hw_params(priv
).valid_tx_ant
);
3019 /* Indicate to uCode which entries might be MIMO.
3020 * If initial rate was MIMO, this will finally end up
3021 * as (IWL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */
3022 if (is_mimo(tbl_type
.lq_type
))
3023 lq_cmd
->general_params
.mimo_delimiter
= index
;
3026 new_rate
= rs_get_lower_rate(lq_sta
, &tbl_type
, rate_idx
,
3029 /* How many times should we repeat the next rate? */
3030 if (is_legacy(tbl_type
.lq_type
)) {
3031 if (ant_toggle_cnt
< NUM_TRY_BEFORE_ANT_TOGGLE
)
3034 rs_toggle_antenna(valid_tx_ant
,
3035 &new_rate
, &tbl_type
))
3038 repeat_rate
= IWL_NUMBER_TRY
;
3040 repeat_rate
= IWL_HT_NUMBER_TRY
;
3043 /* Don't allow HT rates after next pass.
3044 * rs_get_lower_rate() will change type to LQ_A or LQ_G. */
3045 use_ht_possible
= 0;
3047 /* Override next rate if needed for debug purposes */
3048 rs_dbgfs_set_mcs(lq_sta
, &new_rate
, index
);
3050 /* Fill next table entry */
3051 lq_cmd
->rs_table
[index
].rate_n_flags
= cpu_to_le32(new_rate
);
3057 lq_cmd
->agg_params
.agg_frame_cnt_limit
=
3058 sta_priv
->max_agg_bufsize
?: LINK_QUAL_AGG_FRAME_LIMIT_DEF
;
3059 lq_cmd
->agg_params
.agg_dis_start_th
= LINK_QUAL_AGG_DISABLE_START_DEF
;
3061 lq_cmd
->agg_params
.agg_time_limit
=
3062 cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF
);
3064 * overwrite if needed, pass aggregation time limit
3067 if (priv
&& priv
->cfg
->bt_params
&&
3068 priv
->cfg
->bt_params
->agg_time_limit
&&
3069 priv
->bt_traffic_load
>= IWL_BT_COEX_TRAFFIC_LOAD_HIGH
)
3070 lq_cmd
->agg_params
.agg_time_limit
=
3071 cpu_to_le16(priv
->cfg
->bt_params
->agg_time_limit
);
3074 static void *rs_alloc(struct ieee80211_hw
*hw
, struct dentry
*debugfsdir
)
3078 /* rate scale requires free function to be implemented */
3079 static void rs_free(void *priv_rate
)
3084 static void rs_free_sta(void *priv_r
, struct ieee80211_sta
*sta
,
3087 struct iwl_priv
*priv __maybe_unused
= priv_r
;
3089 IWL_DEBUG_RATE(priv
, "enter\n");
3090 IWL_DEBUG_RATE(priv
, "leave\n");
3093 #ifdef CONFIG_MAC80211_DEBUGFS
3094 static int open_file_generic(struct inode
*inode
, struct file
*file
)
3096 file
->private_data
= inode
->i_private
;
3099 static void rs_dbgfs_set_mcs(struct iwl_lq_sta
*lq_sta
,
3100 u32
*rate_n_flags
, int index
)
3102 struct iwl_priv
*priv
;
3107 valid_tx_ant
= hw_params(priv
).valid_tx_ant
;
3108 if (lq_sta
->dbg_fixed_rate
) {
3110 ((lq_sta
->dbg_fixed_rate
& RATE_MCS_ANT_ABC_MSK
)
3111 >> RATE_MCS_ANT_POS
);
3112 if ((valid_tx_ant
& ant_sel_tx
) == ant_sel_tx
) {
3113 *rate_n_flags
= lq_sta
->dbg_fixed_rate
;
3114 IWL_DEBUG_RATE(priv
, "Fixed rate ON\n");
3116 lq_sta
->dbg_fixed_rate
= 0;
3118 "Invalid antenna selection 0x%X, Valid is 0x%X\n",
3119 ant_sel_tx
, valid_tx_ant
);
3120 IWL_DEBUG_RATE(priv
, "Fixed rate OFF\n");
3123 IWL_DEBUG_RATE(priv
, "Fixed rate OFF\n");
3127 static ssize_t
rs_sta_dbgfs_scale_table_write(struct file
*file
,
3128 const char __user
*user_buf
, size_t count
, loff_t
*ppos
)
3130 struct iwl_lq_sta
*lq_sta
= file
->private_data
;
3131 struct iwl_priv
*priv
;
3138 memset(buf
, 0, sizeof(buf
));
3139 buf_size
= min(count
, sizeof(buf
) - 1);
3140 if (copy_from_user(buf
, user_buf
, buf_size
))
3143 if (sscanf(buf
, "%x", &parsed_rate
) == 1)
3144 lq_sta
->dbg_fixed_rate
= parsed_rate
;
3146 lq_sta
->dbg_fixed_rate
= 0;
3148 rs_program_fix_rate(priv
, lq_sta
);
3153 static ssize_t
rs_sta_dbgfs_scale_table_read(struct file
*file
,
3154 char __user
*user_buf
, size_t count
, loff_t
*ppos
)
3162 struct iwl_lq_sta
*lq_sta
= file
->private_data
;
3163 struct iwl_priv
*priv
;
3164 struct iwl_scale_tbl_info
*tbl
= &(lq_sta
->lq_info
[lq_sta
->active_tbl
]);
3167 buff
= kmalloc(1024, GFP_KERNEL
);
3171 desc
+= sprintf(buff
+desc
, "sta_id %d\n", lq_sta
->lq
.sta_id
);
3172 desc
+= sprintf(buff
+desc
, "failed=%d success=%d rate=0%X\n",
3173 lq_sta
->total_failed
, lq_sta
->total_success
,
3174 lq_sta
->active_legacy_rate
);
3175 desc
+= sprintf(buff
+desc
, "fixed rate 0x%X\n",
3176 lq_sta
->dbg_fixed_rate
);
3177 desc
+= sprintf(buff
+desc
, "valid_tx_ant %s%s%s\n",
3178 (hw_params(priv
).valid_tx_ant
& ANT_A
) ? "ANT_A," : "",
3179 (hw_params(priv
).valid_tx_ant
& ANT_B
) ? "ANT_B," : "",
3180 (hw_params(priv
).valid_tx_ant
& ANT_C
) ? "ANT_C" : "");
3181 desc
+= sprintf(buff
+desc
, "lq type %s\n",
3182 (is_legacy(tbl
->lq_type
)) ? "legacy" : "HT");
3183 if (is_Ht(tbl
->lq_type
)) {
3184 desc
+= sprintf(buff
+desc
, " %s",
3185 (is_siso(tbl
->lq_type
)) ? "SISO" :
3186 ((is_mimo2(tbl
->lq_type
)) ? "MIMO2" : "MIMO3"));
3187 desc
+= sprintf(buff
+desc
, " %s",
3188 (tbl
->is_ht40
) ? "40MHz" : "20MHz");
3189 desc
+= sprintf(buff
+desc
, " %s %s %s\n", (tbl
->is_SGI
) ? "SGI" : "",
3190 (lq_sta
->is_green
) ? "GF enabled" : "",
3191 (lq_sta
->is_agg
) ? "AGG on" : "");
3193 desc
+= sprintf(buff
+desc
, "last tx rate=0x%X\n",
3194 lq_sta
->last_rate_n_flags
);
3195 desc
+= sprintf(buff
+desc
, "general:"
3196 "flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n",
3197 lq_sta
->lq
.general_params
.flags
,
3198 lq_sta
->lq
.general_params
.mimo_delimiter
,
3199 lq_sta
->lq
.general_params
.single_stream_ant_msk
,
3200 lq_sta
->lq
.general_params
.dual_stream_ant_msk
);
3202 desc
+= sprintf(buff
+desc
, "agg:"
3203 "time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n",
3204 le16_to_cpu(lq_sta
->lq
.agg_params
.agg_time_limit
),
3205 lq_sta
->lq
.agg_params
.agg_dis_start_th
,
3206 lq_sta
->lq
.agg_params
.agg_frame_cnt_limit
);
3208 desc
+= sprintf(buff
+desc
,
3209 "Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n",
3210 lq_sta
->lq
.general_params
.start_rate_index
[0],
3211 lq_sta
->lq
.general_params
.start_rate_index
[1],
3212 lq_sta
->lq
.general_params
.start_rate_index
[2],
3213 lq_sta
->lq
.general_params
.start_rate_index
[3]);
3215 for (i
= 0; i
< LINK_QUAL_MAX_RETRY_NUM
; i
++) {
3216 index
= iwl_hwrate_to_plcp_idx(
3217 le32_to_cpu(lq_sta
->lq
.rs_table
[i
].rate_n_flags
));
3218 if (is_legacy(tbl
->lq_type
)) {
3219 desc
+= sprintf(buff
+desc
, " rate[%d] 0x%X %smbps\n",
3220 i
, le32_to_cpu(lq_sta
->lq
.rs_table
[i
].rate_n_flags
),
3221 iwl_rate_mcs
[index
].mbps
);
3223 desc
+= sprintf(buff
+desc
, " rate[%d] 0x%X %smbps (%s)\n",
3224 i
, le32_to_cpu(lq_sta
->lq
.rs_table
[i
].rate_n_flags
),
3225 iwl_rate_mcs
[index
].mbps
, iwl_rate_mcs
[index
].mcs
);
3229 ret
= simple_read_from_buffer(user_buf
, count
, ppos
, buff
, desc
);
3234 static const struct file_operations rs_sta_dbgfs_scale_table_ops
= {
3235 .write
= rs_sta_dbgfs_scale_table_write
,
3236 .read
= rs_sta_dbgfs_scale_table_read
,
3237 .open
= open_file_generic
,
3238 .llseek
= default_llseek
,
3240 static ssize_t
rs_sta_dbgfs_stats_table_read(struct file
*file
,
3241 char __user
*user_buf
, size_t count
, loff_t
*ppos
)
3248 struct iwl_lq_sta
*lq_sta
= file
->private_data
;
3250 buff
= kmalloc(1024, GFP_KERNEL
);
3254 for (i
= 0; i
< LQ_SIZE
; i
++) {
3255 desc
+= sprintf(buff
+desc
,
3256 "%s type=%d SGI=%d HT40=%d DUP=%d GF=%d\n"
3258 lq_sta
->active_tbl
== i
? "*" : "x",
3259 lq_sta
->lq_info
[i
].lq_type
,
3260 lq_sta
->lq_info
[i
].is_SGI
,
3261 lq_sta
->lq_info
[i
].is_ht40
,
3262 lq_sta
->lq_info
[i
].is_dup
,
3264 lq_sta
->lq_info
[i
].current_rate
);
3265 for (j
= 0; j
< IWL_RATE_COUNT
; j
++) {
3266 desc
+= sprintf(buff
+desc
,
3267 "counter=%d success=%d %%=%d\n",
3268 lq_sta
->lq_info
[i
].win
[j
].counter
,
3269 lq_sta
->lq_info
[i
].win
[j
].success_counter
,
3270 lq_sta
->lq_info
[i
].win
[j
].success_ratio
);
3273 ret
= simple_read_from_buffer(user_buf
, count
, ppos
, buff
, desc
);
3278 static const struct file_operations rs_sta_dbgfs_stats_table_ops
= {
3279 .read
= rs_sta_dbgfs_stats_table_read
,
3280 .open
= open_file_generic
,
3281 .llseek
= default_llseek
,
3284 static ssize_t
rs_sta_dbgfs_rate_scale_data_read(struct file
*file
,
3285 char __user
*user_buf
, size_t count
, loff_t
*ppos
)
3287 struct iwl_lq_sta
*lq_sta
= file
->private_data
;
3288 struct iwl_scale_tbl_info
*tbl
= &lq_sta
->lq_info
[lq_sta
->active_tbl
];
3292 if (is_Ht(tbl
->lq_type
))
3293 desc
+= sprintf(buff
+desc
,
3294 "Bit Rate= %d Mb/s\n",
3295 tbl
->expected_tpt
[lq_sta
->last_txrate_idx
]);
3297 desc
+= sprintf(buff
+desc
,
3298 "Bit Rate= %d Mb/s\n",
3299 iwl_rates
[lq_sta
->last_txrate_idx
].ieee
>> 1);
3301 return simple_read_from_buffer(user_buf
, count
, ppos
, buff
, desc
);
3304 static const struct file_operations rs_sta_dbgfs_rate_scale_data_ops
= {
3305 .read
= rs_sta_dbgfs_rate_scale_data_read
,
3306 .open
= open_file_generic
,
3307 .llseek
= default_llseek
,
3310 static void rs_add_debugfs(void *priv
, void *priv_sta
,
3313 struct iwl_lq_sta
*lq_sta
= priv_sta
;
3314 lq_sta
->rs_sta_dbgfs_scale_table_file
=
3315 debugfs_create_file("rate_scale_table", S_IRUSR
| S_IWUSR
, dir
,
3316 lq_sta
, &rs_sta_dbgfs_scale_table_ops
);
3317 lq_sta
->rs_sta_dbgfs_stats_table_file
=
3318 debugfs_create_file("rate_stats_table", S_IRUSR
, dir
,
3319 lq_sta
, &rs_sta_dbgfs_stats_table_ops
);
3320 lq_sta
->rs_sta_dbgfs_rate_scale_data_file
=
3321 debugfs_create_file("rate_scale_data", S_IRUSR
, dir
,
3322 lq_sta
, &rs_sta_dbgfs_rate_scale_data_ops
);
3323 lq_sta
->rs_sta_dbgfs_tx_agg_tid_en_file
=
3324 debugfs_create_u8("tx_agg_tid_enable", S_IRUSR
| S_IWUSR
, dir
,
3325 &lq_sta
->tx_agg_tid_en
);
3329 static void rs_remove_debugfs(void *priv
, void *priv_sta
)
3331 struct iwl_lq_sta
*lq_sta
= priv_sta
;
3332 debugfs_remove(lq_sta
->rs_sta_dbgfs_scale_table_file
);
3333 debugfs_remove(lq_sta
->rs_sta_dbgfs_stats_table_file
);
3334 debugfs_remove(lq_sta
->rs_sta_dbgfs_rate_scale_data_file
);
3335 debugfs_remove(lq_sta
->rs_sta_dbgfs_tx_agg_tid_en_file
);
3340 * Initialization of rate scaling information is done by driver after
3341 * the station is added. Since mac80211 calls this function before a
3342 * station is added we ignore it.
3344 static void rs_rate_init_stub(void *priv_r
, struct ieee80211_supported_band
*sband
,
3345 struct ieee80211_sta
*sta
, void *priv_sta
)
3348 static struct rate_control_ops rs_ops
= {
3351 .tx_status
= rs_tx_status
,
3352 .get_rate
= rs_get_rate
,
3353 .rate_init
= rs_rate_init_stub
,
3356 .alloc_sta
= rs_alloc_sta
,
3357 .free_sta
= rs_free_sta
,
3358 #ifdef CONFIG_MAC80211_DEBUGFS
3359 .add_sta_debugfs
= rs_add_debugfs
,
3360 .remove_sta_debugfs
= rs_remove_debugfs
,
3364 int iwlagn_rate_control_register(void)
3366 return ieee80211_rate_control_register(&rs_ops
);
3369 void iwlagn_rate_control_unregister(void)
3371 ieee80211_rate_control_unregister(&rs_ops
);