1 /******************************************************************************
3 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
21 * Contact Information:
22 * Intel Linux Wireless <ilw@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 *****************************************************************************/
31 #include "iwl-agn-calib.h"
32 #include "iwl-helpers.h"
33 #include "iwl-trans.h"
34 #include "iwl-shared.h"
36 static int iwlagn_disable_bss(struct iwl_priv
*priv
,
37 struct iwl_rxon_context
*ctx
,
38 struct iwl_rxon_cmd
*send
)
40 __le32 old_filter
= send
->filter_flags
;
43 send
->filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
44 ret
= iwl_trans_send_cmd_pdu(trans(priv
), ctx
->rxon_cmd
,
45 CMD_SYNC
, sizeof(*send
), send
);
47 send
->filter_flags
= old_filter
;
50 IWL_ERR(priv
, "Error clearing ASSOC_MSK on BSS (%d)\n", ret
);
55 static int iwlagn_disable_pan(struct iwl_priv
*priv
,
56 struct iwl_rxon_context
*ctx
,
57 struct iwl_rxon_cmd
*send
)
59 struct iwl_notification_wait disable_wait
;
60 __le32 old_filter
= send
->filter_flags
;
61 u8 old_dev_type
= send
->dev_type
;
64 iwlagn_init_notification_wait(priv
, &disable_wait
,
65 REPLY_WIPAN_DEACTIVATION_COMPLETE
,
68 send
->filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
69 send
->dev_type
= RXON_DEV_TYPE_P2P
;
70 ret
= iwl_trans_send_cmd_pdu(trans(priv
), ctx
->rxon_cmd
,
71 CMD_SYNC
, sizeof(*send
), send
);
73 send
->filter_flags
= old_filter
;
74 send
->dev_type
= old_dev_type
;
77 IWL_ERR(priv
, "Error disabling PAN (%d)\n", ret
);
78 iwlagn_remove_notification(priv
, &disable_wait
);
80 ret
= iwlagn_wait_notification(priv
, &disable_wait
, HZ
);
82 IWL_ERR(priv
, "Timed out waiting for PAN disable\n");
88 static int iwlagn_disconn_pan(struct iwl_priv
*priv
,
89 struct iwl_rxon_context
*ctx
,
90 struct iwl_rxon_cmd
*send
)
92 __le32 old_filter
= send
->filter_flags
;
95 send
->filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
96 ret
= iwl_trans_send_cmd_pdu(trans(priv
), ctx
->rxon_cmd
, CMD_SYNC
,
99 send
->filter_flags
= old_filter
;
104 static void iwlagn_update_qos(struct iwl_priv
*priv
,
105 struct iwl_rxon_context
*ctx
)
112 ctx
->qos_data
.def_qos_parm
.qos_flags
= 0;
114 if (ctx
->qos_data
.qos_active
)
115 ctx
->qos_data
.def_qos_parm
.qos_flags
|=
116 QOS_PARAM_FLG_UPDATE_EDCA_MSK
;
119 ctx
->qos_data
.def_qos_parm
.qos_flags
|= QOS_PARAM_FLG_TGN_MSK
;
121 IWL_DEBUG_QOS(priv
, "send QoS cmd with Qos active=%d FLAGS=0x%X\n",
122 ctx
->qos_data
.qos_active
,
123 ctx
->qos_data
.def_qos_parm
.qos_flags
);
125 ret
= iwl_trans_send_cmd_pdu(trans(priv
), ctx
->qos_cmd
, CMD_SYNC
,
126 sizeof(struct iwl_qosparam_cmd
),
127 &ctx
->qos_data
.def_qos_parm
);
129 IWL_ERR(priv
, "Failed to update QoS\n");
132 static int iwlagn_update_beacon(struct iwl_priv
*priv
,
133 struct ieee80211_vif
*vif
)
135 lockdep_assert_held(&priv
->shrd
->mutex
);
137 dev_kfree_skb(priv
->beacon_skb
);
138 priv
->beacon_skb
= ieee80211_beacon_get(priv
->hw
, vif
);
139 if (!priv
->beacon_skb
)
141 return iwlagn_send_beacon_cmd(priv
);
144 static int iwlagn_send_rxon_assoc(struct iwl_priv
*priv
,
145 struct iwl_rxon_context
*ctx
)
148 struct iwl_rxon_assoc_cmd rxon_assoc
;
149 const struct iwl_rxon_cmd
*rxon1
= &ctx
->staging
;
150 const struct iwl_rxon_cmd
*rxon2
= &ctx
->active
;
152 if ((rxon1
->flags
== rxon2
->flags
) &&
153 (rxon1
->filter_flags
== rxon2
->filter_flags
) &&
154 (rxon1
->cck_basic_rates
== rxon2
->cck_basic_rates
) &&
155 (rxon1
->ofdm_ht_single_stream_basic_rates
==
156 rxon2
->ofdm_ht_single_stream_basic_rates
) &&
157 (rxon1
->ofdm_ht_dual_stream_basic_rates
==
158 rxon2
->ofdm_ht_dual_stream_basic_rates
) &&
159 (rxon1
->ofdm_ht_triple_stream_basic_rates
==
160 rxon2
->ofdm_ht_triple_stream_basic_rates
) &&
161 (rxon1
->acquisition_data
== rxon2
->acquisition_data
) &&
162 (rxon1
->rx_chain
== rxon2
->rx_chain
) &&
163 (rxon1
->ofdm_basic_rates
== rxon2
->ofdm_basic_rates
)) {
164 IWL_DEBUG_INFO(priv
, "Using current RXON_ASSOC. Not resending.\n");
168 rxon_assoc
.flags
= ctx
->staging
.flags
;
169 rxon_assoc
.filter_flags
= ctx
->staging
.filter_flags
;
170 rxon_assoc
.ofdm_basic_rates
= ctx
->staging
.ofdm_basic_rates
;
171 rxon_assoc
.cck_basic_rates
= ctx
->staging
.cck_basic_rates
;
172 rxon_assoc
.reserved1
= 0;
173 rxon_assoc
.reserved2
= 0;
174 rxon_assoc
.reserved3
= 0;
175 rxon_assoc
.ofdm_ht_single_stream_basic_rates
=
176 ctx
->staging
.ofdm_ht_single_stream_basic_rates
;
177 rxon_assoc
.ofdm_ht_dual_stream_basic_rates
=
178 ctx
->staging
.ofdm_ht_dual_stream_basic_rates
;
179 rxon_assoc
.rx_chain_select_flags
= ctx
->staging
.rx_chain
;
180 rxon_assoc
.ofdm_ht_triple_stream_basic_rates
=
181 ctx
->staging
.ofdm_ht_triple_stream_basic_rates
;
182 rxon_assoc
.acquisition_data
= ctx
->staging
.acquisition_data
;
184 ret
= iwl_trans_send_cmd_pdu(trans(priv
), ctx
->rxon_assoc_cmd
,
185 CMD_ASYNC
, sizeof(rxon_assoc
), &rxon_assoc
);
189 static int iwlagn_rxon_disconn(struct iwl_priv
*priv
,
190 struct iwl_rxon_context
*ctx
)
193 struct iwl_rxon_cmd
*active
= (void *)&ctx
->active
;
195 if (ctx
->ctxid
== IWL_RXON_CTX_BSS
) {
196 ret
= iwlagn_disable_bss(priv
, ctx
, &ctx
->staging
);
198 ret
= iwlagn_disable_pan(priv
, ctx
, &ctx
->staging
);
202 ret
= iwl_send_rxon_timing(priv
, ctx
);
204 IWL_ERR(priv
, "Failed to send timing (%d)!\n", ret
);
207 ret
= iwlagn_disconn_pan(priv
, ctx
, &ctx
->staging
);
214 * Un-assoc RXON clears the station table and WEP
215 * keys, so we have to restore those afterwards.
217 iwl_clear_ucode_stations(priv
, ctx
);
218 /* update -- might need P2P now */
219 iwl_update_bcast_station(priv
, ctx
);
220 iwl_restore_stations(priv
, ctx
);
221 ret
= iwl_restore_default_wep_keys(priv
, ctx
);
223 IWL_ERR(priv
, "Failed to restore WEP keys (%d)\n", ret
);
227 memcpy(active
, &ctx
->staging
, sizeof(*active
));
231 static int iwlagn_rxon_connect(struct iwl_priv
*priv
,
232 struct iwl_rxon_context
*ctx
)
235 struct iwl_rxon_cmd
*active
= (void *)&ctx
->active
;
237 /* RXON timing must be before associated RXON */
238 if (ctx
->ctxid
== IWL_RXON_CTX_BSS
) {
239 ret
= iwl_send_rxon_timing(priv
, ctx
);
241 IWL_ERR(priv
, "Failed to send timing (%d)!\n", ret
);
245 /* QoS info may be cleared by previous un-assoc RXON */
246 iwlagn_update_qos(priv
, ctx
);
249 * We'll run into this code path when beaconing is
250 * enabled, but then we also need to send the beacon
253 if (ctx
->vif
&& (ctx
->vif
->type
== NL80211_IFTYPE_AP
)) {
254 ret
= iwlagn_update_beacon(priv
, ctx
->vif
);
257 "Error sending required beacon (%d)!\n",
263 priv
->start_calib
= 0;
265 * Apply the new configuration.
267 * Associated RXON doesn't clear the station table in uCode,
268 * so we don't need to restore stations etc. after this.
270 ret
= iwl_trans_send_cmd_pdu(trans(priv
), ctx
->rxon_cmd
, CMD_SYNC
,
271 sizeof(struct iwl_rxon_cmd
), &ctx
->staging
);
273 IWL_ERR(priv
, "Error setting new RXON (%d)\n", ret
);
276 memcpy(active
, &ctx
->staging
, sizeof(*active
));
278 iwl_reprogram_ap_sta(priv
, ctx
);
280 /* IBSS beacon needs to be sent after setting assoc */
281 if (ctx
->vif
&& (ctx
->vif
->type
== NL80211_IFTYPE_ADHOC
))
282 if (iwlagn_update_beacon(priv
, ctx
->vif
))
283 IWL_ERR(priv
, "Error sending IBSS beacon\n");
284 iwl_init_sensitivity(priv
);
287 * If we issue a new RXON command which required a tune then
288 * we must send a new TXPOWER command or we won't be able to
291 * It's expected we set power here if channel is changing.
293 ret
= iwl_set_tx_power(priv
, priv
->tx_power_next
, true);
295 IWL_ERR(priv
, "Error sending TX power (%d)\n", ret
);
299 if ((ctx
->vif
&& ctx
->vif
->type
== NL80211_IFTYPE_STATION
) &&
300 priv
->cfg
->ht_params
->smps_mode
)
301 ieee80211_request_smps(ctx
->vif
,
302 priv
->cfg
->ht_params
->smps_mode
);
307 int iwlagn_set_pan_params(struct iwl_priv
*priv
)
309 struct iwl_wipan_params_cmd cmd
;
310 struct iwl_rxon_context
*ctx_bss
, *ctx_pan
;
311 int slot0
= 300, slot1
= 0;
314 if (priv
->valid_contexts
== BIT(IWL_RXON_CTX_BSS
))
317 BUILD_BUG_ON(NUM_IWL_RXON_CTX
!= 2);
319 lockdep_assert_held(&priv
->shrd
->mutex
);
321 ctx_bss
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
322 ctx_pan
= &priv
->contexts
[IWL_RXON_CTX_PAN
];
325 * If the PAN context is inactive, then we don't need
326 * to update the PAN parameters, the last thing we'll
327 * have done before it goes inactive is making the PAN
328 * parameters be WLAN-only.
330 if (!ctx_pan
->is_active
)
333 memset(&cmd
, 0, sizeof(cmd
));
335 /* only 2 slots are currently allowed */
338 cmd
.slots
[0].type
= 0; /* BSS */
339 cmd
.slots
[1].type
= 1; /* PAN */
341 if (priv
->hw_roc_setup
) {
342 /* both contexts must be used for this to happen */
343 slot1
= IWL_MIN_SLOT_TIME
;
345 } else if (ctx_bss
->vif
&& ctx_pan
->vif
) {
346 int bcnint
= ctx_pan
->beacon_int
;
347 int dtim
= ctx_pan
->vif
->bss_conf
.dtim_period
?: 1;
349 /* should be set, but seems unused?? */
350 cmd
.flags
|= cpu_to_le16(IWL_WIPAN_PARAMS_FLG_SLOTTED_MODE
);
352 if (ctx_pan
->vif
->type
== NL80211_IFTYPE_AP
&&
354 bcnint
!= ctx_bss
->beacon_int
) {
356 "beacon intervals don't match (%d, %d)\n",
357 ctx_bss
->beacon_int
, ctx_pan
->beacon_int
);
359 bcnint
= max_t(int, bcnint
,
360 ctx_bss
->beacon_int
);
362 bcnint
= DEFAULT_BEACON_INTERVAL
;
364 slot1
= bcnint
- slot0
;
366 if (test_bit(STATUS_SCAN_HW
, &priv
->shrd
->status
) ||
367 (!ctx_bss
->vif
->bss_conf
.idle
&&
368 !ctx_bss
->vif
->bss_conf
.assoc
)) {
369 slot0
= dtim
* bcnint
* 3 - IWL_MIN_SLOT_TIME
;
370 slot1
= IWL_MIN_SLOT_TIME
;
371 } else if (!ctx_pan
->vif
->bss_conf
.idle
&&
372 !ctx_pan
->vif
->bss_conf
.assoc
) {
373 slot1
= bcnint
* 3 - IWL_MIN_SLOT_TIME
;
374 slot0
= IWL_MIN_SLOT_TIME
;
376 } else if (ctx_pan
->vif
) {
378 slot1
= max_t(int, 1, ctx_pan
->vif
->bss_conf
.dtim_period
) *
380 slot1
= max_t(int, DEFAULT_BEACON_INTERVAL
, slot1
);
382 if (test_bit(STATUS_SCAN_HW
, &priv
->shrd
->status
)) {
383 slot0
= slot1
* 3 - IWL_MIN_SLOT_TIME
;
384 slot1
= IWL_MIN_SLOT_TIME
;
388 cmd
.slots
[0].width
= cpu_to_le16(slot0
);
389 cmd
.slots
[1].width
= cpu_to_le16(slot1
);
391 ret
= iwl_trans_send_cmd_pdu(trans(priv
), REPLY_WIPAN_PARAMS
, CMD_SYNC
,
394 IWL_ERR(priv
, "Error setting PAN parameters (%d)\n", ret
);
400 * iwlagn_commit_rxon - commit staging_rxon to hardware
402 * The RXON command in staging_rxon is committed to the hardware and
403 * the active_rxon structure is updated with the new data. This
404 * function correctly transitions out of the RXON_ASSOC_MSK state if
405 * a HW tune is required based on the RXON structure changes.
407 * The connect/disconnect flow should be as the following:
409 * 1. make sure send RXON command with association bit unset if not connect
410 * this should include the channel and the band for the candidate
412 * 2. Add Station before RXON association with the AP
413 * 3. RXON_timing has to send before RXON for connection
414 * 4. full RXON command - associated bit set
415 * 5. use RXON_ASSOC command to update any flags changes
417 int iwlagn_commit_rxon(struct iwl_priv
*priv
, struct iwl_rxon_context
*ctx
)
419 /* cast away the const for active_rxon in this function */
420 struct iwl_rxon_cmd
*active
= (void *)&ctx
->active
;
421 bool new_assoc
= !!(ctx
->staging
.filter_flags
& RXON_FILTER_ASSOC_MSK
);
424 lockdep_assert_held(&priv
->shrd
->mutex
);
426 if (test_bit(STATUS_EXIT_PENDING
, &priv
->shrd
->status
))
429 if (!iwl_is_alive(priv
->shrd
))
432 /* This function hardcodes a bunch of dual-mode assumptions */
433 BUILD_BUG_ON(NUM_IWL_RXON_CTX
!= 2);
438 /* override BSSID if necessary due to preauth */
439 if (ctx
->preauth_bssid
)
440 memcpy(ctx
->staging
.bssid_addr
, ctx
->bssid
, ETH_ALEN
);
442 /* always get timestamp with Rx frame */
443 ctx
->staging
.flags
|= RXON_FLG_TSF2HOST_MSK
;
446 * force CTS-to-self frames protection if RTS-CTS is not preferred
447 * one aggregation protection method
449 if (!(priv
->cfg
->ht_params
&&
450 priv
->cfg
->ht_params
->use_rts_for_aggregation
))
451 ctx
->staging
.flags
|= RXON_FLG_SELF_CTS_EN
;
453 if ((ctx
->vif
&& ctx
->vif
->bss_conf
.use_short_slot
) ||
454 !(ctx
->staging
.flags
& RXON_FLG_BAND_24G_MSK
))
455 ctx
->staging
.flags
|= RXON_FLG_SHORT_SLOT_MSK
;
457 ctx
->staging
.flags
&= ~RXON_FLG_SHORT_SLOT_MSK
;
459 iwl_print_rx_config_cmd(priv
, ctx
);
460 ret
= iwl_check_rxon_cmd(priv
, ctx
);
462 IWL_ERR(priv
, "Invalid RXON configuration. Not committing.\n");
467 * receive commit_rxon request
468 * abort any previous channel switch if still in process
470 if (test_bit(STATUS_CHANNEL_SWITCH_PENDING
, &priv
->shrd
->status
) &&
471 (priv
->switch_channel
!= ctx
->staging
.channel
)) {
472 IWL_DEBUG_11H(priv
, "abort channel switch on %d\n",
473 le16_to_cpu(priv
->switch_channel
));
474 iwl_chswitch_done(priv
, false);
478 * If we don't need to send a full RXON, we can use
479 * iwl_rxon_assoc_cmd which is used to reconfigure filter
480 * and other flags for the current radio configuration.
482 if (!iwl_full_rxon_required(priv
, ctx
)) {
483 ret
= iwlagn_send_rxon_assoc(priv
, ctx
);
485 IWL_ERR(priv
, "Error setting RXON_ASSOC (%d)\n", ret
);
489 memcpy(active
, &ctx
->staging
, sizeof(*active
));
491 * We do not commit tx power settings while channel changing,
492 * do it now if after settings changed.
494 iwl_set_tx_power(priv
, priv
->tx_power_next
, false);
496 /* make sure we are in the right PS state */
497 iwl_power_update_mode(priv
, true);
502 iwl_set_rxon_hwcrypto(priv
, ctx
, !iwlagn_mod_params
.sw_crypto
);
505 "Going to commit RXON\n"
506 " * with%s RXON_FILTER_ASSOC_MSK\n"
509 (new_assoc
? "" : "out"),
510 le16_to_cpu(ctx
->staging
.channel
),
511 ctx
->staging
.bssid_addr
);
514 * Always clear associated first, but with the correct config.
515 * This is required as for example station addition for the
516 * AP station must be done after the BSSID is set to correctly
517 * set up filters in the device.
519 ret
= iwlagn_rxon_disconn(priv
, ctx
);
523 ret
= iwlagn_set_pan_params(priv
);
528 return iwlagn_rxon_connect(priv
, ctx
);
533 int iwlagn_mac_config(struct ieee80211_hw
*hw
, u32 changed
)
535 struct iwl_priv
*priv
= hw
->priv
;
536 struct iwl_rxon_context
*ctx
;
537 struct ieee80211_conf
*conf
= &hw
->conf
;
538 struct ieee80211_channel
*channel
= conf
->channel
;
539 const struct iwl_channel_info
*ch_info
;
542 IWL_DEBUG_MAC80211(priv
, "changed %#x", changed
);
544 mutex_lock(&priv
->shrd
->mutex
);
546 if (unlikely(test_bit(STATUS_SCANNING
, &priv
->shrd
->status
))) {
547 IWL_DEBUG_MAC80211(priv
, "leave - scanning\n");
551 if (!iwl_is_ready(priv
->shrd
)) {
552 IWL_DEBUG_MAC80211(priv
, "leave - not ready\n");
556 if (changed
& (IEEE80211_CONF_CHANGE_SMPS
|
557 IEEE80211_CONF_CHANGE_CHANNEL
)) {
558 /* mac80211 uses static for non-HT which is what we want */
559 priv
->current_ht_config
.smps
= conf
->smps_mode
;
562 * Recalculate chain counts.
564 * If monitor mode is enabled then mac80211 will
565 * set up the SM PS mode to OFF if an HT channel is
568 for_each_context(priv
, ctx
)
569 iwlagn_set_rxon_chain(priv
, ctx
);
572 if (changed
& IEEE80211_CONF_CHANGE_CHANNEL
) {
575 ch_info
= iwl_get_channel_info(priv
, channel
->band
,
577 if (!is_channel_valid(ch_info
)) {
578 IWL_DEBUG_MAC80211(priv
, "leave - invalid channel\n");
583 spin_lock_irqsave(&priv
->shrd
->lock
, flags
);
585 for_each_context(priv
, ctx
) {
586 /* Configure HT40 channels */
587 if (ctx
->ht
.enabled
!= conf_is_ht(conf
))
588 ctx
->ht
.enabled
= conf_is_ht(conf
);
590 if (ctx
->ht
.enabled
) {
591 if (conf_is_ht40_minus(conf
)) {
592 ctx
->ht
.extension_chan_offset
=
593 IEEE80211_HT_PARAM_CHA_SEC_BELOW
;
594 ctx
->ht
.is_40mhz
= true;
595 } else if (conf_is_ht40_plus(conf
)) {
596 ctx
->ht
.extension_chan_offset
=
597 IEEE80211_HT_PARAM_CHA_SEC_ABOVE
;
598 ctx
->ht
.is_40mhz
= true;
600 ctx
->ht
.extension_chan_offset
=
601 IEEE80211_HT_PARAM_CHA_SEC_NONE
;
602 ctx
->ht
.is_40mhz
= false;
605 ctx
->ht
.is_40mhz
= false;
608 * Default to no protection. Protection mode will
609 * later be set from BSS config in iwl_ht_conf
611 ctx
->ht
.protection
= IEEE80211_HT_OP_MODE_PROTECTION_NONE
;
613 /* if we are switching from ht to 2.4 clear flags
614 * from any ht related info since 2.4 does not
616 if (le16_to_cpu(ctx
->staging
.channel
) !=
618 ctx
->staging
.flags
= 0;
620 iwl_set_rxon_channel(priv
, channel
, ctx
);
621 iwl_set_rxon_ht(priv
, &priv
->current_ht_config
);
623 iwl_set_flags_for_band(priv
, ctx
, channel
->band
,
627 spin_unlock_irqrestore(&priv
->shrd
->lock
, flags
);
629 iwl_update_bcast_stations(priv
);
632 * The list of supported rates and rate mask can be different
633 * for each band; since the band may have changed, reset
634 * the rate mask to what mac80211 lists.
639 if (changed
& (IEEE80211_CONF_CHANGE_PS
|
640 IEEE80211_CONF_CHANGE_IDLE
)) {
641 ret
= iwl_power_update_mode(priv
, false);
643 IWL_DEBUG_MAC80211(priv
, "Error setting sleep level\n");
646 if (changed
& IEEE80211_CONF_CHANGE_POWER
) {
647 IWL_DEBUG_MAC80211(priv
, "TX Power old=%d new=%d\n",
648 priv
->tx_power_user_lmt
, conf
->power_level
);
650 iwl_set_tx_power(priv
, conf
->power_level
, false);
653 for_each_context(priv
, ctx
) {
654 if (!memcmp(&ctx
->staging
, &ctx
->active
, sizeof(ctx
->staging
)))
656 iwlagn_commit_rxon(priv
, ctx
);
659 mutex_unlock(&priv
->shrd
->mutex
);
663 static void iwlagn_check_needed_chains(struct iwl_priv
*priv
,
664 struct iwl_rxon_context
*ctx
,
665 struct ieee80211_bss_conf
*bss_conf
)
667 struct ieee80211_vif
*vif
= ctx
->vif
;
668 struct iwl_rxon_context
*tmp
;
669 struct ieee80211_sta
*sta
;
670 struct iwl_ht_config
*ht_conf
= &priv
->current_ht_config
;
671 struct ieee80211_sta_ht_cap
*ht_cap
;
674 lockdep_assert_held(&priv
->shrd
->mutex
);
677 case NL80211_IFTYPE_STATION
:
679 sta
= ieee80211_find_sta(vif
, bss_conf
->bssid
);
682 * If at all, this can only happen through a race
683 * when the AP disconnects us while we're still
684 * setting up the connection, in that case mac80211
685 * will soon tell us about that.
687 need_multiple
= false;
692 ht_cap
= &sta
->ht_cap
;
694 need_multiple
= true;
697 * If the peer advertises no support for receiving 2 and 3
698 * stream MCS rates, it can't be transmitting them either.
700 if (ht_cap
->mcs
.rx_mask
[1] == 0 &&
701 ht_cap
->mcs
.rx_mask
[2] == 0) {
702 need_multiple
= false;
703 } else if (!(ht_cap
->mcs
.tx_params
&
704 IEEE80211_HT_MCS_TX_DEFINED
)) {
705 /* If it can't TX MCS at all ... */
706 need_multiple
= false;
707 } else if (ht_cap
->mcs
.tx_params
&
708 IEEE80211_HT_MCS_TX_RX_DIFF
) {
712 * But if it can receive them, it might still not
713 * be able to transmit them, which is what we need
714 * to check here -- so check the number of streams
715 * it advertises for TX (if different from RX).
718 maxstreams
= (ht_cap
->mcs
.tx_params
&
719 IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK
);
721 IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT
;
725 need_multiple
= false;
730 case NL80211_IFTYPE_ADHOC
:
732 need_multiple
= false;
736 need_multiple
= true;
740 ctx
->ht_need_multiple_chains
= need_multiple
;
742 if (!need_multiple
) {
743 /* check all contexts */
744 for_each_context(priv
, tmp
) {
747 if (tmp
->ht_need_multiple_chains
) {
748 need_multiple
= true;
754 ht_conf
->single_chain_sufficient
= !need_multiple
;
757 static void iwlagn_chain_noise_reset(struct iwl_priv
*priv
)
759 struct iwl_chain_noise_data
*data
= &priv
->chain_noise_data
;
762 if ((data
->state
== IWL_CHAIN_NOISE_ALIVE
) &&
763 iwl_is_any_associated(priv
)) {
764 struct iwl_calib_chain_noise_reset_cmd cmd
;
766 /* clear data for chain noise calibration algorithm */
767 data
->chain_noise_a
= 0;
768 data
->chain_noise_b
= 0;
769 data
->chain_noise_c
= 0;
770 data
->chain_signal_a
= 0;
771 data
->chain_signal_b
= 0;
772 data
->chain_signal_c
= 0;
773 data
->beacon_count
= 0;
775 memset(&cmd
, 0, sizeof(cmd
));
776 iwl_set_calib_hdr(&cmd
.hdr
,
777 priv
->phy_calib_chain_noise_reset_cmd
);
778 ret
= iwl_trans_send_cmd_pdu(trans(priv
),
779 REPLY_PHY_CALIBRATION_CMD
,
780 CMD_SYNC
, sizeof(cmd
), &cmd
);
783 "Could not send REPLY_PHY_CALIBRATION_CMD\n");
784 data
->state
= IWL_CHAIN_NOISE_ACCUMULATE
;
785 IWL_DEBUG_CALIB(priv
, "Run chain_noise_calibrate\n");
789 void iwlagn_bss_info_changed(struct ieee80211_hw
*hw
,
790 struct ieee80211_vif
*vif
,
791 struct ieee80211_bss_conf
*bss_conf
,
794 struct iwl_priv
*priv
= hw
->priv
;
795 struct iwl_rxon_context
*ctx
= iwl_rxon_ctx_from_vif(vif
);
799 mutex_lock(&priv
->shrd
->mutex
);
801 if (unlikely(!iwl_is_ready(priv
->shrd
))) {
802 IWL_DEBUG_MAC80211(priv
, "leave - not ready\n");
803 mutex_unlock(&priv
->shrd
->mutex
);
807 if (unlikely(!ctx
->vif
)) {
808 IWL_DEBUG_MAC80211(priv
, "leave - vif is NULL\n");
809 mutex_unlock(&priv
->shrd
->mutex
);
813 if (changes
& BSS_CHANGED_BEACON_INT
)
816 if (changes
& BSS_CHANGED_QOS
) {
817 ctx
->qos_data
.qos_active
= bss_conf
->qos
;
818 iwlagn_update_qos(priv
, ctx
);
821 ctx
->staging
.assoc_id
= cpu_to_le16(vif
->bss_conf
.aid
);
822 if (vif
->bss_conf
.use_short_preamble
)
823 ctx
->staging
.flags
|= RXON_FLG_SHORT_PREAMBLE_MSK
;
825 ctx
->staging
.flags
&= ~RXON_FLG_SHORT_PREAMBLE_MSK
;
827 if (changes
& BSS_CHANGED_ASSOC
) {
828 if (bss_conf
->assoc
) {
829 priv
->timestamp
= bss_conf
->timestamp
;
830 ctx
->staging
.filter_flags
|= RXON_FILTER_ASSOC_MSK
;
833 * If we disassociate while there are pending
834 * frames, just wake up the queues and let the
835 * frames "escape" ... This shouldn't really
836 * be happening to start with, but we should
837 * not get stuck in this case either since it
838 * can happen if userspace gets confused.
840 if (ctx
->last_tx_rejected
) {
841 ctx
->last_tx_rejected
= false;
842 iwl_trans_wake_any_queue(trans(priv
),
845 ctx
->staging
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
847 if (ctx
->ctxid
== IWL_RXON_CTX_BSS
)
848 priv
->have_rekey_data
= false;
851 iwlagn_bt_coex_rssi_monitor(priv
);
854 if (ctx
->ht
.enabled
) {
855 ctx
->ht
.protection
= bss_conf
->ht_operation_mode
&
856 IEEE80211_HT_OP_MODE_PROTECTION
;
857 ctx
->ht
.non_gf_sta_present
= !!(bss_conf
->ht_operation_mode
&
858 IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT
);
859 iwlagn_check_needed_chains(priv
, ctx
, bss_conf
);
860 iwl_set_rxon_ht(priv
, &priv
->current_ht_config
);
863 iwlagn_set_rxon_chain(priv
, ctx
);
865 if (bss_conf
->use_cts_prot
&& (priv
->band
!= IEEE80211_BAND_5GHZ
))
866 ctx
->staging
.flags
|= RXON_FLG_TGG_PROTECT_MSK
;
868 ctx
->staging
.flags
&= ~RXON_FLG_TGG_PROTECT_MSK
;
870 if (bss_conf
->use_cts_prot
)
871 ctx
->staging
.flags
|= RXON_FLG_SELF_CTS_EN
;
873 ctx
->staging
.flags
&= ~RXON_FLG_SELF_CTS_EN
;
875 memcpy(ctx
->staging
.bssid_addr
, bss_conf
->bssid
, ETH_ALEN
);
877 if (vif
->type
== NL80211_IFTYPE_AP
||
878 vif
->type
== NL80211_IFTYPE_ADHOC
) {
879 if (vif
->bss_conf
.enable_beacon
) {
880 ctx
->staging
.filter_flags
|= RXON_FILTER_ASSOC_MSK
;
881 priv
->beacon_ctx
= ctx
;
883 ctx
->staging
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
884 priv
->beacon_ctx
= NULL
;
888 if (force
|| memcmp(&ctx
->staging
, &ctx
->active
, sizeof(ctx
->staging
)))
889 iwlagn_commit_rxon(priv
, ctx
);
891 if (changes
& BSS_CHANGED_ASSOC
&& bss_conf
->assoc
) {
893 * The chain noise calibration will enable PM upon
894 * completion. If calibration has already been run
895 * then we need to enable power management here.
897 if (priv
->chain_noise_data
.state
== IWL_CHAIN_NOISE_DONE
)
898 iwl_power_update_mode(priv
, false);
900 /* Enable RX differential gain and sensitivity calibrations */
901 if (!priv
->disable_chain_noise_cal
)
902 iwlagn_chain_noise_reset(priv
);
903 priv
->start_calib
= 1;
904 WARN_ON(ctx
->preauth_bssid
);
907 if (changes
& BSS_CHANGED_IBSS
) {
908 ret
= iwlagn_manage_ibss_station(priv
, vif
,
909 bss_conf
->ibss_joined
);
911 IWL_ERR(priv
, "failed to %s IBSS station %pM\n",
912 bss_conf
->ibss_joined
? "add" : "remove",
916 if (changes
& BSS_CHANGED_BEACON
&& vif
->type
== NL80211_IFTYPE_ADHOC
&&
918 if (iwlagn_update_beacon(priv
, vif
))
919 IWL_ERR(priv
, "Error sending IBSS beacon\n");
922 mutex_unlock(&priv
->shrd
->mutex
);
925 void iwlagn_post_scan(struct iwl_priv
*priv
)
927 struct iwl_rxon_context
*ctx
;
930 * We do not commit power settings while scan is pending,
931 * do it now if the settings changed.
933 iwl_power_set_mode(priv
, &priv
->power_data
.sleep_cmd_next
, false);
934 iwl_set_tx_power(priv
, priv
->tx_power_next
, false);
937 * Since setting the RXON may have been deferred while
938 * performing the scan, fire one off if needed
940 for_each_context(priv
, ctx
)
941 if (memcmp(&ctx
->staging
, &ctx
->active
, sizeof(ctx
->staging
)))
942 iwlagn_commit_rxon(priv
, ctx
);
944 iwlagn_set_pan_params(priv
);