Add linux-next specific files for 20110831
[linux-2.6/next.git] / drivers / scsi / megaraid / megaraid_mbox.h
blobc1d86d961a92df976c63da2dfa0cbd39d1babc52
1 /*
3 * Linux MegaRAID device driver
5 * Copyright (c) 2003-2004 LSI Logic Corporation.
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
12 * FILE : megaraid_mbox.h
15 #ifndef _MEGARAID_H_
16 #define _MEGARAID_H_
19 #include "mega_common.h"
20 #include "mbox_defs.h"
21 #include "megaraid_ioctl.h"
24 #define MEGARAID_VERSION "2.20.5.1"
25 #define MEGARAID_EXT_VERSION "(Release Date: Thu Nov 16 15:32:35 EST 2006)"
29 * Define some PCI values here until they are put in the kernel
31 #define PCI_DEVICE_ID_PERC4_DI_DISCOVERY 0x000E
32 #define PCI_SUBSYS_ID_PERC4_DI_DISCOVERY 0x0123
34 #define PCI_DEVICE_ID_PERC4_SC 0x1960
35 #define PCI_SUBSYS_ID_PERC4_SC 0x0520
37 #define PCI_DEVICE_ID_PERC4_DC 0x1960
38 #define PCI_SUBSYS_ID_PERC4_DC 0x0518
40 #define PCI_DEVICE_ID_VERDE 0x0407
42 #define PCI_DEVICE_ID_PERC4_DI_EVERGLADES 0x000F
43 #define PCI_SUBSYS_ID_PERC4_DI_EVERGLADES 0x014A
45 #define PCI_DEVICE_ID_PERC4E_SI_BIGBEND 0x0013
46 #define PCI_SUBSYS_ID_PERC4E_SI_BIGBEND 0x016c
48 #define PCI_DEVICE_ID_PERC4E_DI_KOBUK 0x0013
49 #define PCI_SUBSYS_ID_PERC4E_DI_KOBUK 0x016d
51 #define PCI_DEVICE_ID_PERC4E_DI_CORVETTE 0x0013
52 #define PCI_SUBSYS_ID_PERC4E_DI_CORVETTE 0x016e
54 #define PCI_DEVICE_ID_PERC4E_DI_EXPEDITION 0x0013
55 #define PCI_SUBSYS_ID_PERC4E_DI_EXPEDITION 0x016f
57 #define PCI_DEVICE_ID_PERC4E_DI_GUADALUPE 0x0013
58 #define PCI_SUBSYS_ID_PERC4E_DI_GUADALUPE 0x0170
60 #define PCI_DEVICE_ID_DOBSON 0x0408
62 #define PCI_DEVICE_ID_MEGARAID_SCSI_320_0 0x1960
63 #define PCI_SUBSYS_ID_MEGARAID_SCSI_320_0 0xA520
65 #define PCI_DEVICE_ID_MEGARAID_SCSI_320_1 0x1960
66 #define PCI_SUBSYS_ID_MEGARAID_SCSI_320_1 0x0520
68 #define PCI_DEVICE_ID_MEGARAID_SCSI_320_2 0x1960
69 #define PCI_SUBSYS_ID_MEGARAID_SCSI_320_2 0x0518
71 #define PCI_DEVICE_ID_MEGARAID_I4_133_RAID 0x1960
72 #define PCI_SUBSYS_ID_MEGARAID_I4_133_RAID 0x0522
74 #define PCI_DEVICE_ID_MEGARAID_SATA_150_4 0x1960
75 #define PCI_SUBSYS_ID_MEGARAID_SATA_150_4 0x4523
77 #define PCI_DEVICE_ID_MEGARAID_SATA_150_6 0x1960
78 #define PCI_SUBSYS_ID_MEGARAID_SATA_150_6 0x0523
80 #define PCI_DEVICE_ID_LINDSAY 0x0409
82 #define PCI_DEVICE_ID_INTEL_RAID_SRCS16 0x1960
83 #define PCI_SUBSYS_ID_INTEL_RAID_SRCS16 0x0523
85 #define PCI_DEVICE_ID_INTEL_RAID_SRCU41L_LAKE_SHETEK 0x1960
86 #define PCI_SUBSYS_ID_INTEL_RAID_SRCU41L_LAKE_SHETEK 0x0520
88 #define PCI_SUBSYS_ID_PERC3_QC 0x0471
89 #define PCI_SUBSYS_ID_PERC3_DC 0x0493
90 #define PCI_SUBSYS_ID_PERC3_SC 0x0475
91 #define PCI_SUBSYS_ID_CERC_ATA100_4CH 0x0511
94 #define MBOX_MAX_SCSI_CMDS 128 // number of cmds reserved for kernel
95 #define MBOX_MAX_USER_CMDS 32 // number of cmds for applications
96 #define MBOX_DEF_CMD_PER_LUN 64 // default commands per lun
97 #define MBOX_DEFAULT_SG_SIZE 26 // default sg size supported by all fw
98 #define MBOX_MAX_SG_SIZE 32 // maximum scatter-gather list size
99 #define MBOX_MAX_SECTORS 128 // maximum sectors per IO
100 #define MBOX_TIMEOUT 30 // timeout value for internal cmds
101 #define MBOX_BUSY_WAIT 10 // max usec to wait for busy mailbox
102 #define MBOX_RESET_WAIT 180 // wait these many seconds in reset
103 #define MBOX_RESET_EXT_WAIT 120 // extended wait reset
104 #define MBOX_SYNC_WAIT_CNT 0xFFFF // wait loop index for synchronous mode
106 #define MBOX_SYNC_DELAY_200 200 // 200 micro-seconds
109 * maximum transfer that can happen through the firmware commands issued
110 * internnaly from the driver.
112 #define MBOX_IBUF_SIZE 4096
116 * mbox_ccb_t - command control block specific to mailbox based controllers
117 * @raw_mbox : raw mailbox pointer
118 * @mbox : mailbox
119 * @mbox64 : extended mailbox
120 * @mbox_dma_h : maibox dma address
121 * @sgl64 : 64-bit scatter-gather list
122 * @sgl32 : 32-bit scatter-gather list
123 * @sgl_dma_h : dma handle for the scatter-gather list
124 * @pthru : passthru structure
125 * @pthru_dma_h : dma handle for the passthru structure
126 * @epthru : extended passthru structure
127 * @epthru_dma_h : dma handle for extended passthru structure
128 * @buf_dma_h : dma handle for buffers w/o sg list
130 * command control block specific to the mailbox based controllers
132 typedef struct {
133 uint8_t *raw_mbox;
134 mbox_t *mbox;
135 mbox64_t *mbox64;
136 dma_addr_t mbox_dma_h;
137 mbox_sgl64 *sgl64;
138 mbox_sgl32 *sgl32;
139 dma_addr_t sgl_dma_h;
140 mraid_passthru_t *pthru;
141 dma_addr_t pthru_dma_h;
142 mraid_epassthru_t *epthru;
143 dma_addr_t epthru_dma_h;
144 dma_addr_t buf_dma_h;
145 } mbox_ccb_t;
149 * mraid_device_t - adapter soft state structure for mailbox controllers
150 * @una_mbox64 : 64-bit mbox - unaligned
151 * @una_mbox64_dma : mbox dma addr - unaligned
152 * @mbox : 32-bit mbox - aligned
153 * @mbox64 : 64-bit mbox - aligned
154 * @mbox_dma : mbox dma addr - aligned
155 * @mailbox_lock : exclusion lock for the mailbox
156 * @baseport : base port of hba memory
157 * @baseaddr : mapped addr of hba memory
158 * @mbox_pool : pool of mailboxes
159 * @mbox_pool_handle : handle for the mailbox pool memory
160 * @epthru_pool : a pool for extended passthru commands
161 * @epthru_pool_handle : handle to the pool above
162 * @sg_pool : pool of scatter-gather lists for this driver
163 * @sg_pool_handle : handle to the pool above
164 * @ccb_list : list of our command control blocks
165 * @uccb_list : list of cmd control blocks for mgmt module
166 * @umbox64 : array of mailbox for user commands (cmm)
167 * @pdrv_state : array for state of each physical drive.
168 * @last_disp : flag used to show device scanning
169 * @hw_error : set if FW not responding
170 * @fast_load : If set, skip physical device scanning
171 * @channel_class : channel class, RAID or SCSI
172 * @sysfs_mtx : mutex to serialize access to sysfs res.
173 * @sysfs_uioc : management packet to issue FW calls from sysfs
174 * @sysfs_mbox64 : mailbox packet to issue FW calls from sysfs
175 * @sysfs_buffer : data buffer for FW commands issued from sysfs
176 * @sysfs_buffer_dma : DMA buffer for FW commands issued from sysfs
177 * @sysfs_wait_q : wait queue for sysfs operations
178 * @random_del_supported : set if the random deletion is supported
179 * @curr_ldmap : current LDID map
181 * Initialization structure for mailbox controllers: memory based and IO based
182 * All the fields in this structure are LLD specific and may be discovered at
183 * init() or start() time.
185 * NOTE: The fields of this structures are placed to minimize cache misses
187 #define MAX_LD_EXTENDED64 64
188 typedef struct {
189 mbox64_t *una_mbox64;
190 dma_addr_t una_mbox64_dma;
191 mbox_t *mbox;
192 mbox64_t *mbox64;
193 dma_addr_t mbox_dma;
194 spinlock_t mailbox_lock;
195 unsigned long baseport;
196 void __iomem * baseaddr;
197 struct mraid_pci_blk mbox_pool[MBOX_MAX_SCSI_CMDS];
198 struct dma_pool *mbox_pool_handle;
199 struct mraid_pci_blk epthru_pool[MBOX_MAX_SCSI_CMDS];
200 struct dma_pool *epthru_pool_handle;
201 struct mraid_pci_blk sg_pool[MBOX_MAX_SCSI_CMDS];
202 struct dma_pool *sg_pool_handle;
203 mbox_ccb_t ccb_list[MBOX_MAX_SCSI_CMDS];
204 mbox_ccb_t uccb_list[MBOX_MAX_USER_CMDS];
205 mbox64_t umbox64[MBOX_MAX_USER_CMDS];
207 uint8_t pdrv_state[MBOX_MAX_PHYSICAL_DRIVES];
208 uint32_t last_disp;
209 int hw_error;
210 int fast_load;
211 uint8_t channel_class;
212 struct mutex sysfs_mtx;
213 uioc_t *sysfs_uioc;
214 mbox64_t *sysfs_mbox64;
215 caddr_t sysfs_buffer;
216 dma_addr_t sysfs_buffer_dma;
217 wait_queue_head_t sysfs_wait_q;
218 int random_del_supported;
219 uint16_t curr_ldmap[MAX_LD_EXTENDED64];
220 } mraid_device_t;
222 // route to raid device from adapter
223 #define ADAP2RAIDDEV(adp) ((mraid_device_t *)((adp)->raid_device))
225 #define MAILBOX_LOCK(rdev) (&(rdev)->mailbox_lock)
227 // Find out if this channel is a RAID or SCSI
228 #define IS_RAID_CH(rdev, ch) (((rdev)->channel_class >> (ch)) & 0x01)
231 #define RDINDOOR(rdev) readl((rdev)->baseaddr + 0x20)
232 #define RDOUTDOOR(rdev) readl((rdev)->baseaddr + 0x2C)
233 #define WRINDOOR(rdev, value) writel(value, (rdev)->baseaddr + 0x20)
234 #define WROUTDOOR(rdev, value) writel(value, (rdev)->baseaddr + 0x2C)
236 #endif // _MEGARAID_H_
238 // vim: set ts=8 sw=8 tw=78: