drivers/staging/ft1000/ft1000.h

   1 /*
   2  * Common structures and definitions for FT1000 Flarion Flash OFDM PCMCIA and USB devices
   3  *
   4  * Originally copyright (c) 2002 Flarion Technologies
   5  *
   6  */
   7
   8 #define DSPVERSZ        4
   9 #define HWSERNUMSZ      16
  10 #define SKUSZ           20
  11 #define EUISZ           8
  12 #define MODESZ          2
  13 #define CALVERSZ        2
  14 #define CALDATESZ       6
  15
  16 #define ELECTRABUZZ_ID  0       /* ASIC ID for Electrabuzz */
  17 #define MAGNEMITE_ID    0x1a01  /* ASIC ID for Magnemite */
  18
  19 /* MEMORY MAP common to both ELECTRABUZZ and MAGNEMITE */
  20 #define FT1000_REG_DPRAM_ADDR   0x000E  /* DPADR - Dual Port Ram Indirect Address Register */
  21 #define FT1000_REG_SUP_CTRL     0x0020  /* HCTR - Host Control Register */
  22 #define FT1000_REG_SUP_STAT     0x0022  /* HSTAT - Host Status Register */
  23 #define FT1000_REG_RESET        0x0024  /* HCTR - Host Control Register */
  24 #define FT1000_REG_SUP_ISR      0x0026  /* HISR - Host Interrupt Status Register */
  25 #define FT1000_REG_SUP_IMASK    0x0028  /* HIMASK - Host Interrupt Mask */
  26 #define FT1000_REG_DOORBELL     0x002a  /* DBELL - Door Bell Register */
  27 #define FT1000_REG_ASIC_ID      0x002e  /* ASICID - ASIC Identification Number */
  28
  29 /* MEMORY MAP FOR ELECTRABUZZ ASIC */
  30 #define FT1000_REG_UFIFO_STAT   0x0000  /* UFSR - Uplink FIFO status register */
  31 #define FT1000_REG_UFIFO_BEG    0x0002  /* UFBR - Uplink FIFO beginning register */
  32 #define FT1000_REG_UFIFO_MID    0x0004  /* UFMR - Uplink FIFO middle register */
  33 #define FT1000_REG_UFIFO_END    0x0006  /* UFER - Uplink FIFO end register */
  34 #define FT1000_REG_DFIFO_STAT   0x0008  /* DFSR - Downlink FIFO status register */
  35 #define FT1000_REG_DFIFO        0x000A  /* DFR - Downlink FIFO Register */
  36 #define FT1000_REG_DPRAM_DATA   0x000C  /* DPRAM - Dual Port Indirect Data Register */
  37 #define FT1000_REG_WATERMARK    0x0010  /* WMARK - Watermark Register */
  38
  39 /* MEMORY MAP FOR MAGNEMITE */
  40 #define FT1000_REG_MAG_UFDR     0x0000  /* UFDR - Uplink FIFO Data Register (32-bits) */
  41 #define FT1000_REG_MAG_UFDRL    0x0000  /* UFDRL - Uplink FIFO Data Register low-word (16-bits) */
  42 #define FT1000_REG_MAG_UFDRH    0x0002  /* UFDRH - Uplink FIFO Data Register high-word (16-bits) */
  43 #define FT1000_REG_MAG_UFER     0x0004  /* UFER - Uplink FIFO End Register */
  44 #define FT1000_REG_MAG_UFSR     0x0006  /* UFSR - Uplink FIFO Status Register */
  45 #define FT1000_REG_MAG_DFR      0x0008  /* DFR - Downlink FIFO Register (32-bits) */
  46 #define FT1000_REG_MAG_DFRL     0x0008  /* DFRL - Downlink FIFO Register low-word (16-bits) */
  47 #define FT1000_REG_MAG_DFRH     0x000a  /* DFRH - Downlink FIFO Register high-word (16-bits) */
  48 #define FT1000_REG_MAG_DFSR     0x000c  /* DFSR - Downlink FIFO Status Register */
  49 #define FT1000_REG_MAG_DPDATA   0x0010  /* DPDATA - Dual Port RAM Indirect Data Register (32-bits) */
  50 #define FT1000_REG_MAG_DPDATAL  0x0010  /* DPDATAL - Dual Port RAM Indirect Data Register low-word (16-bits) */
  51 #define FT1000_REG_MAG_DPDATAH  0x0012  /* DPDATAH - Dual Port RAM Indirect Data Register high-word (16-bits) */
  52 #define FT1000_REG_MAG_WATERMARK 0x002c /* WMARK - Watermark Register */
  53 #define FT1000_REG_MAG_VERSION  0x0030  /* LLC Version */
  54
  55 /* Reserved Dual Port RAM offsets for Electrabuzz */
  56 #define FT1000_DPRAM_TX_BASE    0x0002  /* Host to PC Card Messaging Area */
  57 #define FT1000_DPRAM_RX_BASE    0x0800  /* PC Card to Host Messaging Area */
  58 #define FT1000_FIFO_LEN         0x07FC  /* total length for DSP FIFO tracking */
  59 #define FT1000_HI_HO            0x07FE  /* heartbeat with HI/HO */
  60 #define FT1000_DSP_STATUS       0x0FFE  /* dsp status - non-zero is a request to reset dsp */
  61 #define FT1000_DSP_LED          0x0FFA  /* dsp led status for PAD device */
  62 #define FT1000_DSP_CON_STATE    0x0FF8  /* DSP Connection Status Info */
  63 #define FT1000_DPRAM_FEFE       0x0002  /* location for dsp ready indicator */
  64 #define FT1000_DSP_TIMER0       0x1FF0  /* Timer Field from Basestation */
  65 #define FT1000_DSP_TIMER1       0x1FF2  /* Timer Field from Basestation */
  66 #define FT1000_DSP_TIMER2       0x1FF4  /* Timer Field from Basestation */
  67 #define FT1000_DSP_TIMER3       0x1FF6  /* Timer Field from Basestation */
  68
  69 /* Reserved Dual Port RAM offsets for Magnemite */
  70 #define FT1000_DPRAM_MAG_TX_BASE        0x0000  /* Host to PC Card Messaging Area */
  71 #define FT1000_DPRAM_MAG_RX_BASE        0x0200  /* PC Card to Host Messaging Area */
  72
  73 #define FT1000_MAG_FIFO_LEN             0x1FF   /* total length for DSP FIFO tracking */
  74 #define FT1000_MAG_FIFO_LEN_INDX        0x1     /* low-word index */
  75 #define FT1000_MAG_HI_HO                0x1FF   /* heartbeat with HI/HO */
  76 #define FT1000_MAG_HI_HO_INDX           0x0     /* high-word index */
  77 #define FT1000_MAG_DSP_LED              0x3FE   /* dsp led status for PAD device */
  78 #define FT1000_MAG_DSP_LED_INDX         0x0     /* dsp led status for PAD device */
  79 #define FT1000_MAG_DSP_CON_STATE        0x3FE   /* DSP Connection Status Info */
  80 #define FT1000_MAG_DSP_CON_STATE_INDX   0x1     /* DSP Connection Status Info */
  81 #define FT1000_MAG_DPRAM_FEFE           0x000   /* location for dsp ready indicator */
  82 #define FT1000_MAG_DPRAM_FEFE_INDX      0x0     /* location for dsp ready indicator */
  83 #define FT1000_MAG_DSP_TIMER0           0x3FC   /* Timer Field from Basestation */
  84 #define FT1000_MAG_DSP_TIMER0_INDX      0x1
  85 #define FT1000_MAG_DSP_TIMER1           0x3FC   /* Timer Field from Basestation */
  86 #define FT1000_MAG_DSP_TIMER1_INDX      0x0
  87 #define FT1000_MAG_DSP_TIMER2           0x3FD   /* Timer Field from Basestation */
  88 #define FT1000_MAG_DSP_TIMER2_INDX      0x1
  89 #define FT1000_MAG_DSP_TIMER3           0x3FD   /* Timer Field from Basestation */
  90 #define FT1000_MAG_DSP_TIMER3_INDX      0x0
  91 #define FT1000_MAG_TOTAL_LEN            0x200
  92 #define FT1000_MAG_TOTAL_LEN_INDX       0x1
  93 #define FT1000_MAG_PH_LEN               0x200
  94 #define FT1000_MAG_PH_LEN_INDX          0x0
  95 #define FT1000_MAG_PORT_ID              0x201
  96 #define FT1000_MAG_PORT_ID_INDX         0x0
  97
  98 #define HOST_INTF_LE    0x0     /* Host interface little endian mode */
  99 #define HOST_INTF_BE    0x1     /* Host interface big endian mode */
 100
 101 /* FT1000 to Host Doorbell assignments */
 102 #define FT1000_DB_DPRAM_RX      0x0001  /* this value indicates that DSP has data for host in DPRAM */
 103 #define FT1000_DB_DNLD_RX       0x0002  /* Downloader handshake doorbell */
 104 #define FT1000_ASIC_RESET_REQ   0x0004  /* DSP requesting host to reset the ASIC */
 105 #define FT1000_DSP_ASIC_RESET   0x0008  /* DSP indicating host that it will reset the ASIC */
 106 #define FT1000_DB_COND_RESET    0x0010  /* DSP request for a card reset. */
 107
 108 /* Host to FT1000 Doorbell assignments */
 109 #define FT1000_DB_DPRAM_TX      0x0100  /* this value indicates that host has data for DSP in DPRAM. */
 110 #define FT1000_DB_DNLD_TX       0x0200  /* Downloader handshake doorbell */
 111 #define FT1000_ASIC_RESET_DSP   0x0400  /* Responds to FT1000_ASIC_RESET_REQ */
 112 #define FT1000_DB_HB            0x1000  /* Indicates that supervisor has a heartbeat message for DSP. */
 113
 114 #define hi                      0x6869  /* PC Card heartbeat values */
 115 #define ho                      0x686f  /* PC Card heartbeat values */
 116
 117 /* Magnemite specific defines */
 118 #define hi_mag                  0x6968  /* Byte swap hi to avoid additional system call */
 119 #define ho_mag                  0x6f68  /* Byte swap ho to avoid additional system call */
 120
 121 /* Bit field definitions for Host Interrupt Status Register */
 122 /* Indicate the cause of an interrupt. */
 123 #define ISR_EMPTY               0x00    /* no bits set */
 124 #define ISR_DOORBELL_ACK        0x01    /* Doorbell acknowledge from DSP */
 125 #define ISR_DOORBELL_PEND       0x02    /* Doorbell pending from DSP */
 126 #define ISR_RCV                 0x04    /* Packet available in Downlink FIFO */
 127 #define ISR_WATERMARK           0x08    /* Watermark requirements satisfied */
 128
 129 /* Bit field definition for Host Interrupt Mask */
 130 #define ISR_MASK_NONE           0x0000  /* no bits set */
 131 #define ISR_MASK_DOORBELL_ACK   0x0001  /* Doorbell acknowledge mask */
 132 #define ISR_MASK_DOORBELL_PEND  0x0002  /* Doorbell pending mask */
 133 #define ISR_MASK_RCV            0x0004  /* Downlink Packet available mask */
 134 #define ISR_MASK_WATERMARK      0x0008  /* Watermark interrupt mask */
 135 #define ISR_MASK_ALL            0xffff  /* Mask all interrupts */
 136 /* Default interrupt mask (Enable Doorbell pending and Packet available interrupts) */
 137 #define ISR_DEFAULT_MASK        0x7ff9
 138
 139 /* Bit field definition for Host Control Register */
 140 #define DSP_RESET_BIT           0x0001  /* Bit field to control dsp reset state */
 141                                         /* (0 = out of reset 1 = reset) */
 142 #define ASIC_RESET_BIT          0x0002  /* Bit field to control ASIC reset state */
 143                                         /* (0 = out of reset 1 = reset) */
 144 #define DSP_UNENCRYPTED         0x0004
 145 #define DSP_ENCRYPTED           0x0008
 146 #define EFUSE_MEM_DISABLE       0x0040
 147
 148 /* Application specific IDs */
 149 #define DSPID           0x20
 150 #define HOSTID          0x10
 151 #define DSPAIRID        0x90
 152 #define DRIVERID        0x00
 153 #define NETWORKID       0x20
 154
 155 /* Size of DPRAM Message */
 156 #define MAX_CMD_SQSIZE  1780
 157
 158 #define ENET_MAX_SIZE           1514
 159 #define ENET_HEADER_SIZE        14
 160
 161 #define SLOWQ_TYPE      0
 162 #define FASTQ_TYPE      1
 163
 164 #define MAX_DSP_SESS_REC        1024
 165
 166 #define DSP_QID_OFFSET  4
 167
 168 /* Driver message types */
 169 #define MEDIA_STATE             0x0010
 170 #define TIME_UPDATE             0x0020
 171 #define DSP_PROVISION           0x0030
 172 #define DSP_INIT_MSG            0x0050
 173 #define DSP_HIBERNATE           0x0060
 174 #define DSP_STORE_INFO          0x0070
 175 #define DSP_GET_INFO            0x0071
 176 #define GET_DRV_ERR_RPT_MSG     0x0073
 177 #define RSP_DRV_ERR_RPT_MSG     0x0074
 178
 179 /* Driver Error Messages for DSP */
 180 #define DSP_HB_INFO             0x7ef0
 181 #define DSP_FIFO_INFO           0x7ef1
 182 #define DSP_CONDRESET_INFO      0x7ef2
 183 #define DSP_CMDLEN_INFO         0x7ef3
 184 #define DSP_CMDPHCKSUM_INFO     0x7ef4
 185 #define DSP_PKTPHCKSUM_INFO     0x7ef5
 186 #define DSP_PKTLEN_INFO         0x7ef6
 187 #define DSP_USER_RESET          0x7ef7
 188 #define FIFO_FLUSH_MAXLIMIT     0x7ef8
 189 #define FIFO_FLUSH_BADCNT       0x7ef9
 190 #define FIFO_ZERO_LEN           0x7efa
 191
 192 /* Pseudo Header structure */
 193 struct pseudo_hdr {
 194         unsigned short  length;         /* length of msg body */
 195         unsigned char   source;         /* hardware source id */
 196                                         /*    Host = 0x10 */
 197                                         /*    Dsp  = 0x20 */
 198         unsigned char   destination;    /* hardware destination id (refer to source) */
 199         unsigned char   portdest;       /* software destination port id */
 200                                         /*    Host = 0x00 */
 201                                         /*    Applicaton Broadcast = 0x10 */
 202                                         /*    Network Stack = 0x20 */
 203                                         /*    Dsp OAM = 0x80 */
 204                                         /*    Dsp Airlink = 0x90 */
 205                                         /*    Dsp Loader = 0xa0 */
 206                                         /*    Dsp MIP = 0xb0 */
 207         unsigned char   portsrc;        /* software source port id (refer to portdest) */
 208         unsigned short  sh_str_id;      /* not used */
 209         unsigned char   control;        /* not used */
 210         unsigned char   rsvd1;
 211         unsigned char   seq_num;        /* message sequence number */
 212         unsigned char   rsvd2;
 213         unsigned short  qos_class;      /* not used */
 214         unsigned short  checksum;       /* pseudo header checksum */
 215 } __packed;
 216
 217 struct drv_msg {
 218         struct pseudo_hdr pseudo;
 219         u16 type;
 220         u16 length;
 221         u8  data[0];
 222 } __packed;
 223
 224 struct media_msg {
 225         struct pseudo_hdr pseudo;
 226         u16 type;
 227         u16 length;
 228         u16 state;
 229         u32 ip_addr;
 230         u32 net_mask;
 231         u32 gateway;
 232         u32 dns_1;
 233         u32 dns_2;
 234 } __packed;
 235
 236 struct dsp_init_msg {
 237         struct pseudo_hdr pseudo;
 238         u16 type;
 239         u16 length;
 240         u8 DspVer[DSPVERSZ];            /* DSP version number */
 241         u8 HwSerNum[HWSERNUMSZ];        /* Hardware Serial Number */
 242         u8 Sku[SKUSZ];                  /* SKU */
 243         u8 eui64[EUISZ];                /* EUI64 */
 244         u8 ProductMode[MODESZ];         /* Product Mode (Market/Production) */
 245         u8 RfCalVer[CALVERSZ];          /* Rf Calibration version */
 246         u8 RfCalDate[CALDATESZ];        /* Rf Calibration date */
 247 } __packed;
 248
 249 struct prov_record {
 250         struct list_head list;
 251         u8 *pprov_data;
 252 };