drivers/staging/keucr/usb.c

   1 #include <linux/sched.h>
   2 #include <linux/errno.h>
   3 #include <linux/freezer.h>
   4 #include <linux/module.h>
   5 #include <linux/init.h>
   6 #include <linux/slab.h>
   7 #include <linux/kthread.h>
   8 #include <linux/mutex.h>
   9 #include <linux/utsname.h>
  10
  11 #include <scsi/scsi.h>
  12 #include <scsi/scsi_cmnd.h>
  13 #include <scsi/scsi_device.h>
  14
  15 #include "usb.h"
  16 #include "scsiglue.h"
  17 #include "smil.h"
  18 #include "transport.h"
  19
  20 /* Some informational data */
  21 MODULE_AUTHOR("Domao");
  22 MODULE_DESCRIPTION("ENE USB Mass Storage driver for Linux");
  23 MODULE_LICENSE("GPL");
  24
  25 static unsigned int delay_use = 1;
  26
  27 static struct usb_device_id eucr_usb_ids [] = {
  28         { USB_DEVICE(0x058f, 0x6366) },
  29         { USB_DEVICE(0x0cf2, 0x6230) },
  30         { USB_DEVICE(0x0cf2, 0x6250) },
  31         { }                                            /* Terminating entry */
  32 };
  33 MODULE_DEVICE_TABLE (usb, eucr_usb_ids);
  34
  35
  36 #ifdef CONFIG_PM
  37
  38 static int eucr_suspend(struct usb_interface *iface, pm_message_t message)
  39 {
  40         struct us_data *us = usb_get_intfdata(iface);
  41         pr_info("--- eucr_suspend ---\n");
  42         /* Wait until no command is running */
  43         mutex_lock(&us->dev_mutex);
  44
  45         //US_DEBUGP("%s\n", __func__);
  46         if (us->suspend_resume_hook)
  47                 (us->suspend_resume_hook)(us, US_SUSPEND);
  48
  49         /* When runtime PM is working, we'll set a flag to indicate
  50          * whether we should autoresume when a SCSI request arrives. */
  51         // us->Power_IsResum = true;
  52         //us->SD_Status.Ready = 0;
  53
  54         mutex_unlock(&us->dev_mutex);
  55         return 0;
  56 }
  57 //EXPORT_SYMBOL_GPL(eucr_suspend);
  58
  59 static int eucr_resume(struct usb_interface *iface)
  60 {
  61         BYTE    tmp = 0;
  62
  63         struct us_data *us = usb_get_intfdata(iface);
  64         pr_info("--- eucr_resume---\n");
  65         mutex_lock(&us->dev_mutex);
  66
  67         //US_DEBUGP("%s\n", __func__);
  68         if (us->suspend_resume_hook)
  69                 (us->suspend_resume_hook)(us, US_RESUME);
  70
  71
  72         mutex_unlock(&us->dev_mutex);
  73
  74
  75          us->Power_IsResum = true;
  76         //
  77         //us->SD_Status.Ready = 0; //??
  78         us->SM_Status = *(PSM_STATUS)&tmp;
  79
  80         return 0;
  81 }
  82 //EXPORT_SYMBOL_GPL(eucr_resume);
  83 static int eucr_reset_resume(struct usb_interface *iface)
  84 {
  85         BYTE    tmp = 0;
  86         struct us_data *us = usb_get_intfdata(iface);
  87
  88         pr_info("--- eucr_reset_resume---\n");
  89         //US_DEBUGP("%s\n", __func__);
  90
  91         /* Report the reset to the SCSI core */
  92         usb_stor_report_bus_reset(us);
  93
  94         /* FIXME: Notify the subdrivers that they need to reinitialize
  95          * the device */
  96         //ENE_InitMedia(us);
  97         us->Power_IsResum = true;
  98         //
  99         //us->SD_Status.Ready = 0; //??
 100         us->SM_Status = *(PSM_STATUS)&tmp;
 101         return 0;
 102 }
 103 //EXPORT_SYMBOL_GPL(usb_stor_reset_resume);
 104
 105 #else
 106
 107 #define eucr_suspend            NULL
 108 #define eucr_resume             NULL
 109 #define eucr_reset_resume       NULL
 110
 111 #endif
 112
 113 //----- eucr_pre_reset() ---------------------
 114 static int eucr_pre_reset(struct usb_interface *iface)
 115 {
 116         struct us_data *us = usb_get_intfdata(iface);
 117
 118         pr_info("usb --- eucr_pre_reset\n");
 119
 120         /* Make sure no command runs during the reset */
 121         mutex_lock(&us->dev_mutex);
 122         return 0;
 123 }
 124
 125 //----- eucr_post_reset() ---------------------
 126 static int eucr_post_reset(struct usb_interface *iface)
 127 {
 128         struct us_data *us = usb_get_intfdata(iface);
 129
 130         pr_info("usb --- eucr_post_reset\n");
 131
 132         /* Report the reset to the SCSI core */
 133         usb_stor_report_bus_reset(us);
 134
 135         mutex_unlock(&us->dev_mutex);
 136         return 0;
 137 }
 138
 139 //----- fill_inquiry_response() ---------------------
 140 void fill_inquiry_response(struct us_data *us, unsigned char *data, unsigned int data_len)
 141 {
 142         pr_info("usb --- fill_inquiry_response\n");
 143         if (data_len<36) // You lose.
 144                 return;
 145
 146         if (data[0]&0x20)
 147         {
 148                 memset(data+8,0,28);
 149         }
 150         else
 151         {
 152                 u16 bcdDevice = le16_to_cpu(us->pusb_dev->descriptor.bcdDevice);
 153                 memcpy(data+8, us->unusual_dev->vendorName,
 154                         strlen(us->unusual_dev->vendorName) > 8 ? 8 :
 155                         strlen(us->unusual_dev->vendorName));
 156                 memcpy(data+16, us->unusual_dev->productName,
 157                         strlen(us->unusual_dev->productName) > 16 ? 16 :
 158                         strlen(us->unusual_dev->productName));
 159                 data[32] = 0x30 + ((bcdDevice>>12) & 0x0F);
 160                 data[33] = 0x30 + ((bcdDevice>>8) & 0x0F);
 161                 data[34] = 0x30 + ((bcdDevice>>4) & 0x0F);
 162                 data[35] = 0x30 + ((bcdDevice) & 0x0F);
 163         }
 164         usb_stor_set_xfer_buf(us, data, data_len, us->srb, TO_XFER_BUF);
 165 }
 166
 167 //----- usb_stor_control_thread() ---------------------
 168 static int usb_stor_control_thread(void * __us)
 169 {
 170         struct us_data *us = (struct us_data *)__us;
 171         struct Scsi_Host *host = us_to_host(us);
 172
 173         pr_info("usb --- usb_stor_control_thread\n");
 174         for(;;)
 175         {
 176                 if (wait_for_completion_interruptible(&us->cmnd_ready))
 177                         break;
 178
 179                 /* lock the device pointers */
 180                 mutex_lock(&(us->dev_mutex));
 181
 182                 /* if the device has disconnected, we are free to exit */
 183                 if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) {
 184                         mutex_unlock(&us->dev_mutex);
 185                         break;
 186                 }
 187
 188                 /* lock access to the state */
 189                 scsi_lock(host);
 190
 191                 /* When we are called with no command pending, we're done */
 192                 if (us->srb == NULL)
 193                 {
 194                         scsi_unlock(host);
 195                         mutex_unlock(&us->dev_mutex);
 196                         //US_DEBUGP("-- exiting\n");
 197                         break;
 198                 }
 199
 200                 /* has the command timed out *already* ? */
 201                 if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags))
 202                 {
 203                         us->srb->result = DID_ABORT << 16;
 204                         goto SkipForAbort;
 205                 }
 206
 207                 scsi_unlock(host);
 208
 209                 if (us->srb->sc_data_direction == DMA_BIDIRECTIONAL)
 210                 {
 211                         us->srb->result = DID_ERROR << 16;
 212                 }
 213                 else if (us->srb->device->id && !(us->fflags & US_FL_SCM_MULT_TARG))
 214                 {
 215                         us->srb->result = DID_BAD_TARGET << 16;
 216                 }
 217                 else if (us->srb->device->lun > us->max_lun)
 218                 {
 219                         us->srb->result = DID_BAD_TARGET << 16;
 220                 }
 221                 else if ((us->srb->cmnd[0] == INQUIRY) && (us->fflags & US_FL_FIX_INQUIRY))
 222                 {
 223                         unsigned char data_ptr[36] = {0x00, 0x80, 0x02, 0x02, 0x1F, 0x00, 0x00, 0x00};
 224
 225                         fill_inquiry_response(us, data_ptr, 36);
 226                         us->srb->result = SAM_STAT_GOOD;
 227                 }
 228                 else
 229                 {
 230                         us->proto_handler(us->srb, us);
 231                 }
 232
 233                 /* lock access to the state */
 234                 scsi_lock(host);
 235
 236                 /* indicate that the command is done */
 237                 if (us->srb->result != DID_ABORT << 16)
 238                 {
 239                         us->srb->scsi_done(us->srb);
 240                 }
 241                 else
 242                 {
 243 SkipForAbort:
 244                         pr_info("scsi command aborted\n");
 245                 }
 246
 247                 if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags))
 248                 {
 249                         complete(&(us->notify));
 250
 251                         /* Allow USB transfers to resume */
 252                         clear_bit(US_FLIDX_ABORTING, &us->dflags);
 253                         clear_bit(US_FLIDX_TIMED_OUT, &us->dflags);
 254                 }
 255
 256                 /* finished working on this command */
 257                 us->srb = NULL;
 258                 scsi_unlock(host);
 259
 260                 /* unlock the device pointers */
 261                 mutex_unlock(&us->dev_mutex);
 262         } /* for (;;) */
 263
 264         /* Wait until we are told to stop */
 265         for (;;)
 266         {
 267                 set_current_state(TASK_INTERRUPTIBLE);
 268                 if (kthread_should_stop())
 269                         break;
 270                 schedule();
 271         }
 272         __set_current_state(TASK_RUNNING);
 273         return 0;
 274 }
 275
 276 //----- associate_dev() ---------------------
 277 static int associate_dev(struct us_data *us, struct usb_interface *intf)
 278 {
 279         pr_info("usb --- associate_dev\n");
 280
 281         /* Fill in the device-related fields */
 282         us->pusb_dev = interface_to_usbdev(intf);
 283         us->pusb_intf = intf;
 284         us->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
 285
 286         /* Store our private data in the interface */
 287         usb_set_intfdata(intf, us);
 288
 289         /* Allocate the device-related DMA-mapped buffers */
 290         us->cr = usb_alloc_coherent(us->pusb_dev, sizeof(*us->cr), GFP_KERNEL, &us->cr_dma);
 291         if (!us->cr)
 292         {
 293                 pr_info("usb_ctrlrequest allocation failed\n");
 294                 return -ENOMEM;
 295         }
 296
 297         us->iobuf = usb_alloc_coherent(us->pusb_dev, US_IOBUF_SIZE, GFP_KERNEL, &us->iobuf_dma);
 298         if (!us->iobuf)
 299         {
 300                 pr_info("I/O buffer allocation failed\n");
 301                 return -ENOMEM;
 302         }
 303
 304         us->sensebuf = kmalloc(US_SENSE_SIZE, GFP_KERNEL);
 305         if (!us->sensebuf)
 306         {
 307                 pr_info("Sense buffer allocation failed\n");
 308                 return -ENOMEM;
 309         }
 310         return 0;
 311 }
 312
 313 //----- get_device_info() ---------------------
 314 static int get_device_info(struct us_data *us, const struct usb_device_id *id)
 315 {
 316         struct usb_device *dev = us->pusb_dev;
 317         struct usb_interface_descriptor *idesc = &us->pusb_intf->cur_altsetting->desc;
 318
 319         pr_info("usb --- get_device_info\n");
 320
 321         us->subclass = idesc->bInterfaceSubClass;
 322         us->protocol = idesc->bInterfaceProtocol;
 323         us->fflags = USB_US_ORIG_FLAGS(id->driver_info);
 324         us->Power_IsResum = false;
 325
 326         if (us->fflags & US_FL_IGNORE_DEVICE)
 327         {
 328                 pr_info("device ignored\n");
 329                 return -ENODEV;
 330         }
 331
 332         if (dev->speed != USB_SPEED_HIGH)
 333                 us->fflags &= ~US_FL_GO_SLOW;
 334
 335         return 0;
 336 }
 337
 338 //----- get_transport() ---------------------
 339 static int get_transport(struct us_data *us)
 340 {
 341         pr_info("usb --- get_transport\n");
 342         switch (us->protocol) {
 343         case USB_PR_BULK:
 344                 us->transport_name = "Bulk";
 345                 us->transport = usb_stor_Bulk_transport;
 346                 us->transport_reset = usb_stor_Bulk_reset;
 347                 break;
 348
 349         default:
 350                 return -EIO;
 351         }
 352         /* pr_info("Transport: %s\n", us->transport_name); */
 353
 354         /* fix for single-lun devices */
 355         if (us->fflags & US_FL_SINGLE_LUN)
 356                 us->max_lun = 0;
 357         return 0;
 358 }
 359
 360 //----- get_protocol() ---------------------
 361 static int get_protocol(struct us_data *us)
 362 {
 363         pr_info("usb --- get_protocol\n");
 364         pr_info("us->pusb_dev->descriptor.idVendor = %x\n",
 365                         us->pusb_dev->descriptor.idVendor);
 366         pr_info("us->pusb_dev->descriptor.idProduct = %x\n",
 367                         us->pusb_dev->descriptor.idProduct);
 368         switch (us->subclass) {
 369         case USB_SC_SCSI:
 370                 us->protocol_name = "Transparent SCSI";
 371                 if( (us->pusb_dev->descriptor.idVendor == 0x0CF2) && (us->pusb_dev->descriptor.idProduct == 0x6250) )
 372                         us->proto_handler = ENE_stor_invoke_transport;
 373                 else
 374                         us->proto_handler = usb_stor_invoke_transport;
 375                 break;
 376
 377         default:
 378                 return -EIO;
 379         }
 380         /* pr_info("Protocol: %s\n", us->protocol_name); */
 381         return 0;
 382 }
 383
 384 //----- get_pipes() ---------------------
 385 static int get_pipes(struct us_data *us)
 386 {
 387         struct usb_host_interface *altsetting = us->pusb_intf->cur_altsetting;
 388         int i;
 389         struct usb_endpoint_descriptor *ep;
 390         struct usb_endpoint_descriptor *ep_in = NULL;
 391         struct usb_endpoint_descriptor *ep_out = NULL;
 392         struct usb_endpoint_descriptor *ep_int = NULL;
 393
 394         pr_info("usb --- get_pipes\n");
 395
 396         for (i = 0; i < altsetting->desc.bNumEndpoints; i++)
 397         {
 398                 ep = &altsetting->endpoint[i].desc;
 399
 400                 if (usb_endpoint_xfer_bulk(ep))
 401                 {
 402                         if (usb_endpoint_dir_in(ep))
 403                         {
 404                                 if (!ep_in)
 405                                         ep_in = ep;
 406                         }
 407                         else
 408                         {
 409                                 if (!ep_out)
 410                                         ep_out = ep;
 411                         }
 412                 }
 413                 else if (usb_endpoint_is_int_in(ep))
 414                 {
 415                         if (!ep_int)
 416                                 ep_int = ep;
 417                 }
 418         }
 419
 420         if (!ep_in || !ep_out || (us->protocol == USB_PR_CBI && !ep_int))
 421         {
 422                 pr_info("Endpoint sanity check failed! Rejecting dev.\n");
 423                 return -EIO;
 424         }
 425
 426         /* Calculate and store the pipe values */
 427         us->send_ctrl_pipe = usb_sndctrlpipe(us->pusb_dev, 0);
 428         us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0);
 429         us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev, ep_out->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
 430         us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev, ep_in->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
 431         if (ep_int)
 432         {
 433                 us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev, ep_int->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
 434                 us->ep_bInterval = ep_int->bInterval;
 435         }
 436         return 0;
 437 }
 438
 439 //----- usb_stor_acquire_resources() ---------------------
 440 static int usb_stor_acquire_resources(struct us_data *us)
 441 {
 442         struct task_struct *th;
 443
 444         pr_info("usb --- usb_stor_acquire_resources\n");
 445         us->current_urb = usb_alloc_urb(0, GFP_KERNEL);
 446         if (!us->current_urb)
 447         {
 448                 pr_info("URB allocation failed\n");
 449                 return -ENOMEM;
 450         }
 451
 452         /* Start up our control thread */
 453         th = kthread_run(usb_stor_control_thread, us, "eucr-storage");
 454         if (IS_ERR(th))
 455         {
 456                 pr_info("Unable to start control thread\n");
 457                 return PTR_ERR(th);
 458         }
 459         us->ctl_thread = th;
 460
 461         return 0;
 462 }
 463
 464 //----- usb_stor_release_resources() ---------------------
 465 static void usb_stor_release_resources(struct us_data *us)
 466 {
 467         pr_info("usb --- usb_stor_release_resources\n");
 468
 469         SM_FreeMem();
 470
 471         complete(&us->cmnd_ready);
 472         if (us->ctl_thread)
 473                 kthread_stop(us->ctl_thread);
 474
 475         /* Call the destructor routine, if it exists */
 476         if (us->extra_destructor)
 477         {
 478                 pr_info("-- calling extra_destructor()\n");
 479                 us->extra_destructor(us->extra);
 480         }
 481
 482         /* Free the extra data and the URB */
 483         kfree(us->extra);
 484         usb_free_urb(us->current_urb);
 485 }
 486
 487 //----- dissociate_dev() ---------------------
 488 static void dissociate_dev(struct us_data *us)
 489 {
 490         pr_info("usb --- dissociate_dev\n");
 491
 492         kfree(us->sensebuf);
 493
 494         /* Free the device-related DMA-mapped buffers */
 495         if (us->cr)
 496                 usb_free_coherent(us->pusb_dev, sizeof(*us->cr), us->cr, us->cr_dma);
 497         if (us->iobuf)
 498                 usb_free_coherent(us->pusb_dev, US_IOBUF_SIZE, us->iobuf, us->iobuf_dma);
 499
 500         /* Remove our private data from the interface */
 501         usb_set_intfdata(us->pusb_intf, NULL);
 502 }
 503
 504 //----- quiesce_and_remove_host() ---------------------
 505 static void quiesce_and_remove_host(struct us_data *us)
 506 {
 507         struct Scsi_Host *host = us_to_host(us);
 508
 509         pr_info("usb --- quiesce_and_remove_host\n");
 510
 511         /* If the device is really gone, cut short reset delays */
 512         if (us->pusb_dev->state == USB_STATE_NOTATTACHED)
 513                 set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
 514
 515         /* Prevent SCSI-scanning (if it hasn't started yet)
 516          * and wait for the SCSI-scanning thread to stop.
 517          */
 518         set_bit(US_FLIDX_DONT_SCAN, &us->dflags);
 519         wake_up(&us->delay_wait);
 520         wait_for_completion(&us->scanning_done);
 521
 522         /* Removing the host will perform an orderly shutdown: caches
 523          * synchronized, disks spun down, etc.
 524          */
 525         scsi_remove_host(host);
 526
 527         /* Prevent any new commands from being accepted and cut short
 528          * reset delays.
 529          */
 530         scsi_lock(host);
 531         set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
 532         scsi_unlock(host);
 533         wake_up(&us->delay_wait);
 534 }
 535
 536 //----- release_everything() ---------------------
 537 static void release_everything(struct us_data *us)
 538 {
 539         pr_info("usb --- release_everything\n");
 540
 541         usb_stor_release_resources(us);
 542         dissociate_dev(us);
 543         scsi_host_put(us_to_host(us));
 544 }
 545
 546 //----- usb_stor_scan_thread() ---------------------
 547 static int usb_stor_scan_thread(void * __us)
 548 {
 549         struct us_data *us = (struct us_data *)__us;
 550
 551         pr_info("usb --- usb_stor_scan_thread\n");
 552         pr_info("EUCR : device found at %d\n", us->pusb_dev->devnum);
 553
 554         set_freezable();
 555         /* Wait for the timeout to expire or for a disconnect */
 556         if (delay_use > 0) {
 557                 wait_event_freezable_timeout(us->delay_wait,
 558                                 test_bit(US_FLIDX_DONT_SCAN, &us->dflags),
 559                                 delay_use * HZ);
 560         }
 561
 562         /* If the device is still connected, perform the scanning */
 563         if (!test_bit(US_FLIDX_DONT_SCAN, &us->dflags))
 564         {
 565                 /* For bulk-only devices, determine the max LUN value */
 566                 if (us->protocol == USB_PR_BULK && !(us->fflags & US_FL_SINGLE_LUN))
 567                 {
 568                         mutex_lock(&us->dev_mutex);
 569                         us->max_lun = usb_stor_Bulk_max_lun(us);
 570                         mutex_unlock(&us->dev_mutex);
 571                 }
 572                 scsi_scan_host(us_to_host(us));
 573                 pr_info("EUCR : device scan complete\n");
 574         }
 575         complete_and_exit(&us->scanning_done, 0);
 576 }
 577
 578 //----- eucr_probe() ---------------------
 579 static int eucr_probe(struct usb_interface *intf, const struct usb_device_id *id)
 580 {
 581         struct Scsi_Host *host;
 582         struct us_data *us;
 583         int result;
 584         BYTE    MiscReg03 = 0;
 585         struct task_struct *th;
 586
 587         pr_info("usb --- eucr_probe\n");
 588
 589       host = scsi_host_alloc(&usb_stor_host_template, sizeof(*us));
 590         if (!host)
 591         {
 592                 pr_info("Unable to allocate the scsi host\n");
 593                 return -ENOMEM;
 594         }
 595
 596         /* Allow 16-byte CDBs and thus > 2TB */
 597         host->max_cmd_len = 16;
 598         us = host_to_us(host);
 599         memset(us, 0, sizeof(struct us_data));
 600         mutex_init(&(us->dev_mutex));
 601         init_completion(&us->cmnd_ready);
 602         init_completion(&(us->notify));
 603         init_waitqueue_head(&us->delay_wait);
 604         init_completion(&us->scanning_done);
 605
 606         /* Associate the us_data structure with the USB device */
 607         result = associate_dev(us, intf);
 608         if (result)
 609                 goto BadDevice;
 610
 611         /* Get Device info */
 612         result = get_device_info(us, id);
 613         if (result)
 614                 goto BadDevice;
 615
 616         /* Get the transport, protocol, and pipe settings */
 617         result = get_transport(us);
 618         if (result)
 619                 goto BadDevice;
 620         result = get_protocol(us);
 621         if (result)
 622                 goto BadDevice;
 623         result = get_pipes(us);
 624         if (result)
 625                 goto BadDevice;
 626
 627         /* Acquire all the other resources and add the host */
 628         result = usb_stor_acquire_resources(us);
 629         if (result)
 630                 goto BadDevice;
 631
 632         result = scsi_add_host(host, &intf->dev);
 633         if (result)
 634         {
 635                 pr_info("Unable to add the scsi host\n");
 636                 goto BadDevice;
 637         }
 638
 639         /* Start up the thread for delayed SCSI-device scanning */
 640         th = kthread_create(usb_stor_scan_thread, us, "eucr-stor-scan");
 641         if (IS_ERR(th)) {
 642                 pr_info("Unable to start the device-scanning thread\n");
 643                 complete(&us->scanning_done);
 644                 quiesce_and_remove_host(us);
 645                 result = PTR_ERR(th);
 646                 goto BadDevice;
 647         }
 648         wake_up_process(th);
 649
 650         /* probe card type */
 651         result = ENE_Read_BYTE(us, REG_CARD_STATUS, &MiscReg03);
 652         if (result != USB_STOR_XFER_GOOD) {
 653                 result = USB_STOR_TRANSPORT_ERROR;
 654                 quiesce_and_remove_host(us);
 655                 goto BadDevice;
 656         }
 657
 658         if (!(MiscReg03 & 0x02)) {
 659                 result = -ENODEV;
 660                 quiesce_and_remove_host(us);
 661                 pr_info("keucr: The driver only supports SM/MS card.\
 662                         To use SD card, \
 663                         please build driver/usb/storage/ums-eneub6250.ko\n");
 664                 goto BadDevice;
 665         }
 666
 667         return 0;
 668
 669         /* We come here if there are any problems */
 670 BadDevice:
 671         pr_info("usb --- eucr_probe failed\n");
 672         release_everything(us);
 673         return result;
 674 }
 675
 676 //----- eucr_disconnect() ---------------------
 677 static void eucr_disconnect(struct usb_interface *intf)
 678 {
 679         struct us_data *us = usb_get_intfdata(intf);
 680
 681         pr_info("usb --- eucr_disconnect\n");
 682         quiesce_and_remove_host(us);
 683         release_everything(us);
 684 }
 685
 686 /***********************************************************************
 687  * Initialization and registration
 688  ***********************************************************************/
 689
 690 //----- usb_storage_driver() ---------------------
 691 static struct usb_driver usb_storage_driver = {
 692         .name =         "eucr",
 693         .probe =                eucr_probe,
 694         .suspend =          eucr_suspend,
 695         .resume =           eucr_resume,
 696         .reset_resume = eucr_reset_resume,
 697         .disconnect =   eucr_disconnect,
 698         .pre_reset =    eucr_pre_reset,
 699         .post_reset =   eucr_post_reset,
 700         .id_table =             eucr_usb_ids,
 701         .soft_unbind =  1,
 702 };
 703
 704 //----- usb_stor_init() ---------------------
 705 static int __init usb_stor_init(void)
 706 {
 707         int retval;
 708         pr_info("usb --- usb_stor_init start\n");
 709
 710         retval = usb_register(&usb_storage_driver);
 711         if (retval == 0)
 712                 pr_info("ENE USB Mass Storage support registered.\n");
 713
 714         return retval;
 715 }
 716
 717 //----- usb_stor_exit() ---------------------
 718 static void __exit usb_stor_exit(void)
 719 {
 720         pr_info("usb --- usb_stor_exit\n");
 721
 722         usb_deregister(&usb_storage_driver) ;
 723 }
 724
 725 module_init(usb_stor_init);
 726 module_exit(usb_stor_exit);