drivers/usb/gadget/fsl_mxc_udc.c

   1 /*
   2  * Copyright (C) 2009
   3  * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
   4  *
   5  * Description:
   6  * Helper routines for i.MX3x SoCs from Freescale, needed by the fsl_usb2_udc.c
   7  * driver to function correctly on these systems.
   8  *
   9  * This program is free software; you can redistribute  it and/or modify it
  10  * under  the terms of  the GNU General  Public License as published by the
  11  * Free Software Foundation;  either version 2 of the  License, or (at your
  12  * option) any later version.
  13  */
  14 #include <linux/clk.h>
  15 #include <linux/delay.h>
  16 #include <linux/err.h>
  17 #include <linux/fsl_devices.h>
  18 #include <linux/platform_device.h>
  19
  20 #include <mach/hardware.h>
  21
  22 static struct clk *mxc_ahb_clk;
  23 static struct clk *mxc_usb_clk;
  24
  25 /* workaround ENGcm09152 for i.MX35 */
  26 #define USBPHYCTRL_OTGBASE_OFFSET       0x608
  27 #define USBPHYCTRL_EVDO                 (1 << 23)
  28
  29 int fsl_udc_clk_init(struct platform_device *pdev)
  30 {
  31         struct fsl_usb2_platform_data *pdata;
  32         unsigned long freq;
  33         int ret;
  34
  35         pdata = pdev->dev.platform_data;
  36
  37         if (!cpu_is_mx35() && !cpu_is_mx25()) {
  38                 mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
  39                 if (IS_ERR(mxc_ahb_clk))
  40                         return PTR_ERR(mxc_ahb_clk);
  41
  42                 ret = clk_enable(mxc_ahb_clk);
  43                 if (ret < 0) {
  44                         dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
  45                         goto eenahb;
  46                 }
  47         }
  48
  49         /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
  50         mxc_usb_clk = clk_get(&pdev->dev, "usb");
  51         if (IS_ERR(mxc_usb_clk)) {
  52                 dev_err(&pdev->dev, "clk_get(\"usb\") failed\n");
  53                 ret = PTR_ERR(mxc_usb_clk);
  54                 goto egusb;
  55         }
  56
  57         if (!cpu_is_mx51()) {
  58                 freq = clk_get_rate(mxc_usb_clk);
  59                 if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
  60                     (freq < 59999000 || freq > 60001000)) {
  61                         dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
  62                         ret = -EINVAL;
  63                         goto eclkrate;
  64                 }
  65         }
  66
  67         ret = clk_enable(mxc_usb_clk);
  68         if (ret < 0) {
  69                 dev_err(&pdev->dev, "clk_enable(\"usb_clk\") failed\n");
  70                 goto eenusb;
  71         }
  72
  73         return 0;
  74
  75 eenusb:
  76 eclkrate:
  77         clk_put(mxc_usb_clk);
  78         mxc_usb_clk = NULL;
  79 egusb:
  80         if (!cpu_is_mx35())
  81                 clk_disable(mxc_ahb_clk);
  82 eenahb:
  83         if (!cpu_is_mx35())
  84                 clk_put(mxc_ahb_clk);
  85         return ret;
  86 }
  87
  88 void fsl_udc_clk_finalize(struct platform_device *pdev)
  89 {
  90         struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
  91 #if defined(CONFIG_SOC_IMX35)
  92         if (cpu_is_mx35()) {
  93                 unsigned int v;
  94
  95                 /* workaround ENGcm09152 for i.MX35 */
  96                 if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
  97                         v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
  98                                         USBPHYCTRL_OTGBASE_OFFSET));
  99                         writel(v | USBPHYCTRL_EVDO,
 100                                 MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
 101                                         USBPHYCTRL_OTGBASE_OFFSET));
 102                 }
 103         }
 104 #endif
 105
 106         /* ULPI transceivers don't need usbpll */
 107         if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {
 108                 clk_disable(mxc_usb_clk);
 109                 clk_put(mxc_usb_clk);
 110                 mxc_usb_clk = NULL;
 111         }
 112 }
 113
 114 void fsl_udc_clk_release(void)
 115 {
 116         if (mxc_usb_clk) {
 117                 clk_disable(mxc_usb_clk);
 118                 clk_put(mxc_usb_clk);
 119         }
 120         if (!cpu_is_mx35()) {
 121                 clk_disable(mxc_ahb_clk);
 122                 clk_put(mxc_ahb_clk);
 123         }
 124 }