Add linux-next specific files for 20110831
[linux-2.6/next.git] / drivers / usb / host / whci / qset.c
blobd6e175428618d4b31f69bd3d323e7c5aef93deae
1 /*
2 * Wireless Host Controller (WHC) qset management.
4 * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License version
8 * 2 as published by the Free Software Foundation.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program. If not, see <http://www.gnu.org/licenses/>.
18 #include <linux/kernel.h>
19 #include <linux/dma-mapping.h>
20 #include <linux/slab.h>
21 #include <linux/uwb/umc.h>
22 #include <linux/usb.h>
24 #include "../../wusbcore/wusbhc.h"
26 #include "whcd.h"
28 struct whc_qset *qset_alloc(struct whc *whc, gfp_t mem_flags)
30 struct whc_qset *qset;
31 dma_addr_t dma;
33 qset = dma_pool_alloc(whc->qset_pool, mem_flags, &dma);
34 if (qset == NULL)
35 return NULL;
36 memset(qset, 0, sizeof(struct whc_qset));
38 qset->qset_dma = dma;
39 qset->whc = whc;
41 INIT_LIST_HEAD(&qset->list_node);
42 INIT_LIST_HEAD(&qset->stds);
44 return qset;
47 /**
48 * qset_fill_qh - fill the static endpoint state in a qset's QHead
49 * @qset: the qset whose QH needs initializing with static endpoint
50 * state
51 * @urb: an urb for a transfer to this endpoint
53 static void qset_fill_qh(struct whc *whc, struct whc_qset *qset, struct urb *urb)
55 struct usb_device *usb_dev = urb->dev;
56 struct wusb_dev *wusb_dev = usb_dev->wusb_dev;
57 struct usb_wireless_ep_comp_descriptor *epcd;
58 bool is_out;
59 uint8_t phy_rate;
61 is_out = usb_pipeout(urb->pipe);
63 qset->max_packet = le16_to_cpu(urb->ep->desc.wMaxPacketSize);
65 epcd = (struct usb_wireless_ep_comp_descriptor *)qset->ep->extra;
66 if (epcd) {
67 qset->max_seq = epcd->bMaxSequence;
68 qset->max_burst = epcd->bMaxBurst;
69 } else {
70 qset->max_seq = 2;
71 qset->max_burst = 1;
75 * Initial PHY rate is 53.3 Mbit/s for control endpoints or
76 * the maximum supported by the device for other endpoints
77 * (unless limited by the user).
79 if (usb_pipecontrol(urb->pipe))
80 phy_rate = UWB_PHY_RATE_53;
81 else {
82 uint16_t phy_rates;
84 phy_rates = le16_to_cpu(wusb_dev->wusb_cap_descr->wPHYRates);
85 phy_rate = fls(phy_rates) - 1;
86 if (phy_rate > whc->wusbhc.phy_rate)
87 phy_rate = whc->wusbhc.phy_rate;
90 qset->qh.info1 = cpu_to_le32(
91 QH_INFO1_EP(usb_pipeendpoint(urb->pipe))
92 | (is_out ? QH_INFO1_DIR_OUT : QH_INFO1_DIR_IN)
93 | usb_pipe_to_qh_type(urb->pipe)
94 | QH_INFO1_DEV_INFO_IDX(wusb_port_no_to_idx(usb_dev->portnum))
95 | QH_INFO1_MAX_PKT_LEN(qset->max_packet)
97 qset->qh.info2 = cpu_to_le32(
98 QH_INFO2_BURST(qset->max_burst)
99 | QH_INFO2_DBP(0)
100 | QH_INFO2_MAX_COUNT(3)
101 | QH_INFO2_MAX_RETRY(3)
102 | QH_INFO2_MAX_SEQ(qset->max_seq - 1)
104 /* FIXME: where can we obtain these Tx parameters from? Why
105 * doesn't the chip know what Tx power to use? It knows the Rx
106 * strength and can presumably guess the Tx power required
107 * from that? */
108 qset->qh.info3 = cpu_to_le32(
109 QH_INFO3_TX_RATE(phy_rate)
110 | QH_INFO3_TX_PWR(0) /* 0 == max power */
113 qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
117 * qset_clear - clear fields in a qset so it may be reinserted into a
118 * schedule.
120 * The sequence number and current window are not cleared (see
121 * qset_reset()).
123 void qset_clear(struct whc *whc, struct whc_qset *qset)
125 qset->td_start = qset->td_end = qset->ntds = 0;
127 qset->qh.link = cpu_to_le32(QH_LINK_NTDS(8) | QH_LINK_T);
128 qset->qh.status = qset->qh.status & QH_STATUS_SEQ_MASK;
129 qset->qh.err_count = 0;
130 qset->qh.scratch[0] = 0;
131 qset->qh.scratch[1] = 0;
132 qset->qh.scratch[2] = 0;
134 memset(&qset->qh.overlay, 0, sizeof(qset->qh.overlay));
136 init_completion(&qset->remove_complete);
140 * qset_reset - reset endpoint state in a qset.
142 * Clears the sequence number and current window. This qset must not
143 * be in the ASL or PZL.
145 void qset_reset(struct whc *whc, struct whc_qset *qset)
147 qset->reset = 0;
149 qset->qh.status &= ~QH_STATUS_SEQ_MASK;
150 qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
154 * get_qset - get the qset for an async endpoint
156 * A new qset is created if one does not already exist.
158 struct whc_qset *get_qset(struct whc *whc, struct urb *urb,
159 gfp_t mem_flags)
161 struct whc_qset *qset;
163 qset = urb->ep->hcpriv;
164 if (qset == NULL) {
165 qset = qset_alloc(whc, mem_flags);
166 if (qset == NULL)
167 return NULL;
169 qset->ep = urb->ep;
170 urb->ep->hcpriv = qset;
171 qset_fill_qh(whc, qset, urb);
173 return qset;
176 void qset_remove_complete(struct whc *whc, struct whc_qset *qset)
178 qset->remove = 0;
179 list_del_init(&qset->list_node);
180 complete(&qset->remove_complete);
184 * qset_add_qtds - add qTDs for an URB to a qset
186 * Returns true if the list (ASL/PZL) must be updated because (for a
187 * WHCI 0.95 controller) an activated qTD was pointed to be iCur.
189 enum whc_update qset_add_qtds(struct whc *whc, struct whc_qset *qset)
191 struct whc_std *std;
192 enum whc_update update = 0;
194 list_for_each_entry(std, &qset->stds, list_node) {
195 struct whc_qtd *qtd;
196 uint32_t status;
198 if (qset->ntds >= WHCI_QSET_TD_MAX
199 || (qset->pause_after_urb && std->urb != qset->pause_after_urb))
200 break;
202 if (std->qtd)
203 continue; /* already has a qTD */
205 qtd = std->qtd = &qset->qtd[qset->td_end];
207 /* Fill in setup bytes for control transfers. */
208 if (usb_pipecontrol(std->urb->pipe))
209 memcpy(qtd->setup, std->urb->setup_packet, 8);
211 status = QTD_STS_ACTIVE | QTD_STS_LEN(std->len);
213 if (whc_std_last(std) && usb_pipeout(std->urb->pipe))
214 status |= QTD_STS_LAST_PKT;
217 * For an IN transfer the iAlt field should be set so
218 * the h/w will automatically advance to the next
219 * transfer. However, if there are 8 or more TDs
220 * remaining in this transfer then iAlt cannot be set
221 * as it could point to somewhere in this transfer.
223 if (std->ntds_remaining < WHCI_QSET_TD_MAX) {
224 int ialt;
225 ialt = (qset->td_end + std->ntds_remaining) % WHCI_QSET_TD_MAX;
226 status |= QTD_STS_IALT(ialt);
227 } else if (usb_pipein(std->urb->pipe))
228 qset->pause_after_urb = std->urb;
230 if (std->num_pointers)
231 qtd->options = cpu_to_le32(QTD_OPT_IOC);
232 else
233 qtd->options = cpu_to_le32(QTD_OPT_IOC | QTD_OPT_SMALL);
234 qtd->page_list_ptr = cpu_to_le64(std->dma_addr);
236 qtd->status = cpu_to_le32(status);
238 if (QH_STATUS_TO_ICUR(qset->qh.status) == qset->td_end)
239 update = WHC_UPDATE_UPDATED;
241 if (++qset->td_end >= WHCI_QSET_TD_MAX)
242 qset->td_end = 0;
243 qset->ntds++;
246 return update;
250 * qset_remove_qtd - remove the first qTD from a qset.
252 * The qTD might be still active (if it's part of a IN URB that
253 * resulted in a short read) so ensure it's deactivated.
255 static void qset_remove_qtd(struct whc *whc, struct whc_qset *qset)
257 qset->qtd[qset->td_start].status = 0;
259 if (++qset->td_start >= WHCI_QSET_TD_MAX)
260 qset->td_start = 0;
261 qset->ntds--;
264 static void qset_copy_bounce_to_sg(struct whc *whc, struct whc_std *std)
266 struct scatterlist *sg;
267 void *bounce;
268 size_t remaining, offset;
270 bounce = std->bounce_buf;
271 remaining = std->len;
273 sg = std->bounce_sg;
274 offset = std->bounce_offset;
276 while (remaining) {
277 size_t len;
279 len = min(sg->length - offset, remaining);
280 memcpy(sg_virt(sg) + offset, bounce, len);
282 bounce += len;
283 remaining -= len;
285 offset += len;
286 if (offset >= sg->length) {
287 sg = sg_next(sg);
288 offset = 0;
295 * qset_free_std - remove an sTD and free it.
296 * @whc: the WHCI host controller
297 * @std: the sTD to remove and free.
299 void qset_free_std(struct whc *whc, struct whc_std *std)
301 list_del(&std->list_node);
302 if (std->bounce_buf) {
303 bool is_out = usb_pipeout(std->urb->pipe);
304 dma_addr_t dma_addr;
306 if (std->num_pointers)
307 dma_addr = le64_to_cpu(std->pl_virt[0].buf_ptr);
308 else
309 dma_addr = std->dma_addr;
311 dma_unmap_single(whc->wusbhc.dev, dma_addr,
312 std->len, is_out ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
313 if (!is_out)
314 qset_copy_bounce_to_sg(whc, std);
315 kfree(std->bounce_buf);
317 if (std->pl_virt) {
318 if (std->dma_addr)
319 dma_unmap_single(whc->wusbhc.dev, std->dma_addr,
320 std->num_pointers * sizeof(struct whc_page_list_entry),
321 DMA_TO_DEVICE);
322 kfree(std->pl_virt);
323 std->pl_virt = NULL;
325 kfree(std);
329 * qset_remove_qtds - remove an URB's qTDs (and sTDs).
331 static void qset_remove_qtds(struct whc *whc, struct whc_qset *qset,
332 struct urb *urb)
334 struct whc_std *std, *t;
336 list_for_each_entry_safe(std, t, &qset->stds, list_node) {
337 if (std->urb != urb)
338 break;
339 if (std->qtd != NULL)
340 qset_remove_qtd(whc, qset);
341 qset_free_std(whc, std);
346 * qset_free_stds - free any remaining sTDs for an URB.
348 static void qset_free_stds(struct whc_qset *qset, struct urb *urb)
350 struct whc_std *std, *t;
352 list_for_each_entry_safe(std, t, &qset->stds, list_node) {
353 if (std->urb == urb)
354 qset_free_std(qset->whc, std);
358 static int qset_fill_page_list(struct whc *whc, struct whc_std *std, gfp_t mem_flags)
360 dma_addr_t dma_addr = std->dma_addr;
361 dma_addr_t sp, ep;
362 size_t pl_len;
363 int p;
365 /* Short buffers don't need a page list. */
366 if (std->len <= WHCI_PAGE_SIZE) {
367 std->num_pointers = 0;
368 return 0;
371 sp = dma_addr & ~(WHCI_PAGE_SIZE-1);
372 ep = dma_addr + std->len;
373 std->num_pointers = DIV_ROUND_UP(ep - sp, WHCI_PAGE_SIZE);
375 pl_len = std->num_pointers * sizeof(struct whc_page_list_entry);
376 std->pl_virt = kmalloc(pl_len, mem_flags);
377 if (std->pl_virt == NULL)
378 return -ENOMEM;
379 std->dma_addr = dma_map_single(whc->wusbhc.dev, std->pl_virt, pl_len, DMA_TO_DEVICE);
381 for (p = 0; p < std->num_pointers; p++) {
382 std->pl_virt[p].buf_ptr = cpu_to_le64(dma_addr);
383 dma_addr = (dma_addr + WHCI_PAGE_SIZE) & ~(WHCI_PAGE_SIZE-1);
386 return 0;
390 * urb_dequeue_work - executes asl/pzl update and gives back the urb to the system.
392 static void urb_dequeue_work(struct work_struct *work)
394 struct whc_urb *wurb = container_of(work, struct whc_urb, dequeue_work);
395 struct whc_qset *qset = wurb->qset;
396 struct whc *whc = qset->whc;
397 unsigned long flags;
399 if (wurb->is_async == true)
400 asl_update(whc, WUSBCMD_ASYNC_UPDATED
401 | WUSBCMD_ASYNC_SYNCED_DB
402 | WUSBCMD_ASYNC_QSET_RM);
403 else
404 pzl_update(whc, WUSBCMD_PERIODIC_UPDATED
405 | WUSBCMD_PERIODIC_SYNCED_DB
406 | WUSBCMD_PERIODIC_QSET_RM);
408 spin_lock_irqsave(&whc->lock, flags);
409 qset_remove_urb(whc, qset, wurb->urb, wurb->status);
410 spin_unlock_irqrestore(&whc->lock, flags);
413 static struct whc_std *qset_new_std(struct whc *whc, struct whc_qset *qset,
414 struct urb *urb, gfp_t mem_flags)
416 struct whc_std *std;
418 std = kzalloc(sizeof(struct whc_std), mem_flags);
419 if (std == NULL)
420 return NULL;
422 std->urb = urb;
423 std->qtd = NULL;
425 INIT_LIST_HEAD(&std->list_node);
426 list_add_tail(&std->list_node, &qset->stds);
428 return std;
431 static int qset_add_urb_sg(struct whc *whc, struct whc_qset *qset, struct urb *urb,
432 gfp_t mem_flags)
434 size_t remaining;
435 struct scatterlist *sg;
436 int i;
437 int ntds = 0;
438 struct whc_std *std = NULL;
439 struct whc_page_list_entry *entry;
440 dma_addr_t prev_end = 0;
441 size_t pl_len;
442 int p = 0;
444 remaining = urb->transfer_buffer_length;
446 for_each_sg(urb->sg, sg, urb->num_sgs, i) {
447 dma_addr_t dma_addr;
448 size_t dma_remaining;
449 dma_addr_t sp, ep;
450 int num_pointers;
452 if (remaining == 0) {
453 break;
456 dma_addr = sg_dma_address(sg);
457 dma_remaining = min_t(size_t, sg_dma_len(sg), remaining);
459 while (dma_remaining) {
460 size_t dma_len;
463 * We can use the previous std (if it exists) provided that:
464 * - the previous one ended on a page boundary.
465 * - the current one begins on a page boundary.
466 * - the previous one isn't full.
468 * If a new std is needed but the previous one
469 * was not a whole number of packets then this
470 * sg list cannot be mapped onto multiple
471 * qTDs. Return an error and let the caller
472 * sort it out.
474 if (!std
475 || (prev_end & (WHCI_PAGE_SIZE-1))
476 || (dma_addr & (WHCI_PAGE_SIZE-1))
477 || std->len + WHCI_PAGE_SIZE > QTD_MAX_XFER_SIZE) {
478 if (std && std->len % qset->max_packet != 0)
479 return -EINVAL;
480 std = qset_new_std(whc, qset, urb, mem_flags);
481 if (std == NULL) {
482 return -ENOMEM;
484 ntds++;
485 p = 0;
488 dma_len = dma_remaining;
491 * If the remainder of this element doesn't
492 * fit in a single qTD, limit the qTD to a
493 * whole number of packets. This allows the
494 * remainder to go into the next qTD.
496 if (std->len + dma_len > QTD_MAX_XFER_SIZE) {
497 dma_len = (QTD_MAX_XFER_SIZE / qset->max_packet)
498 * qset->max_packet - std->len;
501 std->len += dma_len;
502 std->ntds_remaining = -1; /* filled in later */
504 sp = dma_addr & ~(WHCI_PAGE_SIZE-1);
505 ep = dma_addr + dma_len;
506 num_pointers = DIV_ROUND_UP(ep - sp, WHCI_PAGE_SIZE);
507 std->num_pointers += num_pointers;
509 pl_len = std->num_pointers * sizeof(struct whc_page_list_entry);
511 std->pl_virt = krealloc(std->pl_virt, pl_len, mem_flags);
512 if (std->pl_virt == NULL) {
513 return -ENOMEM;
516 for (;p < std->num_pointers; p++, entry++) {
517 std->pl_virt[p].buf_ptr = cpu_to_le64(dma_addr);
518 dma_addr = (dma_addr + WHCI_PAGE_SIZE) & ~(WHCI_PAGE_SIZE-1);
521 prev_end = dma_addr = ep;
522 dma_remaining -= dma_len;
523 remaining -= dma_len;
527 /* Now the number of stds is know, go back and fill in
528 std->ntds_remaining. */
529 list_for_each_entry(std, &qset->stds, list_node) {
530 if (std->ntds_remaining == -1) {
531 pl_len = std->num_pointers * sizeof(struct whc_page_list_entry);
532 std->ntds_remaining = ntds--;
533 std->dma_addr = dma_map_single(whc->wusbhc.dev, std->pl_virt,
534 pl_len, DMA_TO_DEVICE);
537 return 0;
541 * qset_add_urb_sg_linearize - add an urb with sg list, copying the data
543 * If the URB contains an sg list whose elements cannot be directly
544 * mapped to qTDs then the data must be transferred via bounce
545 * buffers.
547 static int qset_add_urb_sg_linearize(struct whc *whc, struct whc_qset *qset,
548 struct urb *urb, gfp_t mem_flags)
550 bool is_out = usb_pipeout(urb->pipe);
551 size_t max_std_len;
552 size_t remaining;
553 int ntds = 0;
554 struct whc_std *std = NULL;
555 void *bounce = NULL;
556 struct scatterlist *sg;
557 int i;
559 /* limit maximum bounce buffer to 16 * 3.5 KiB ~= 28 k */
560 max_std_len = qset->max_burst * qset->max_packet;
562 remaining = urb->transfer_buffer_length;
564 for_each_sg(urb->sg, sg, urb->num_sgs, i) {
565 size_t len;
566 size_t sg_remaining;
567 void *orig;
569 if (remaining == 0) {
570 break;
573 sg_remaining = min_t(size_t, remaining, sg->length);
574 orig = sg_virt(sg);
576 while (sg_remaining) {
577 if (!std || std->len == max_std_len) {
578 std = qset_new_std(whc, qset, urb, mem_flags);
579 if (std == NULL)
580 return -ENOMEM;
581 std->bounce_buf = kmalloc(max_std_len, mem_flags);
582 if (std->bounce_buf == NULL)
583 return -ENOMEM;
584 std->bounce_sg = sg;
585 std->bounce_offset = orig - sg_virt(sg);
586 bounce = std->bounce_buf;
587 ntds++;
590 len = min(sg_remaining, max_std_len - std->len);
592 if (is_out)
593 memcpy(bounce, orig, len);
595 std->len += len;
596 std->ntds_remaining = -1; /* filled in later */
598 bounce += len;
599 orig += len;
600 sg_remaining -= len;
601 remaining -= len;
606 * For each of the new sTDs, map the bounce buffers, create
607 * page lists (if necessary), and fill in std->ntds_remaining.
609 list_for_each_entry(std, &qset->stds, list_node) {
610 if (std->ntds_remaining != -1)
611 continue;
613 std->dma_addr = dma_map_single(&whc->umc->dev, std->bounce_buf, std->len,
614 is_out ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
616 if (qset_fill_page_list(whc, std, mem_flags) < 0)
617 return -ENOMEM;
619 std->ntds_remaining = ntds--;
622 return 0;
626 * qset_add_urb - add an urb to the qset's queue.
628 * The URB is chopped into sTDs, one for each qTD that will required.
629 * At least one qTD (and sTD) is required even if the transfer has no
630 * data (e.g., for some control transfers).
632 int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb,
633 gfp_t mem_flags)
635 struct whc_urb *wurb;
636 int remaining = urb->transfer_buffer_length;
637 u64 transfer_dma = urb->transfer_dma;
638 int ntds_remaining;
639 int ret;
641 wurb = kzalloc(sizeof(struct whc_urb), mem_flags);
642 if (wurb == NULL)
643 goto err_no_mem;
644 urb->hcpriv = wurb;
645 wurb->qset = qset;
646 wurb->urb = urb;
647 INIT_WORK(&wurb->dequeue_work, urb_dequeue_work);
649 if (urb->num_sgs) {
650 ret = qset_add_urb_sg(whc, qset, urb, mem_flags);
651 if (ret == -EINVAL) {
652 qset_free_stds(qset, urb);
653 ret = qset_add_urb_sg_linearize(whc, qset, urb, mem_flags);
655 if (ret < 0)
656 goto err_no_mem;
657 return 0;
660 ntds_remaining = DIV_ROUND_UP(remaining, QTD_MAX_XFER_SIZE);
661 if (ntds_remaining == 0)
662 ntds_remaining = 1;
664 while (ntds_remaining) {
665 struct whc_std *std;
666 size_t std_len;
668 std_len = remaining;
669 if (std_len > QTD_MAX_XFER_SIZE)
670 std_len = QTD_MAX_XFER_SIZE;
672 std = qset_new_std(whc, qset, urb, mem_flags);
673 if (std == NULL)
674 goto err_no_mem;
676 std->dma_addr = transfer_dma;
677 std->len = std_len;
678 std->ntds_remaining = ntds_remaining;
680 if (qset_fill_page_list(whc, std, mem_flags) < 0)
681 goto err_no_mem;
683 ntds_remaining--;
684 remaining -= std_len;
685 transfer_dma += std_len;
688 return 0;
690 err_no_mem:
691 qset_free_stds(qset, urb);
692 return -ENOMEM;
696 * qset_remove_urb - remove an URB from the urb queue.
698 * The URB is returned to the USB subsystem.
700 void qset_remove_urb(struct whc *whc, struct whc_qset *qset,
701 struct urb *urb, int status)
703 struct wusbhc *wusbhc = &whc->wusbhc;
704 struct whc_urb *wurb = urb->hcpriv;
706 usb_hcd_unlink_urb_from_ep(&wusbhc->usb_hcd, urb);
707 /* Drop the lock as urb->complete() may enqueue another urb. */
708 spin_unlock(&whc->lock);
709 wusbhc_giveback_urb(wusbhc, urb, status);
710 spin_lock(&whc->lock);
712 kfree(wurb);
716 * get_urb_status_from_qtd - get the completed urb status from qTD status
717 * @urb: completed urb
718 * @status: qTD status
720 static int get_urb_status_from_qtd(struct urb *urb, u32 status)
722 if (status & QTD_STS_HALTED) {
723 if (status & QTD_STS_DBE)
724 return usb_pipein(urb->pipe) ? -ENOSR : -ECOMM;
725 else if (status & QTD_STS_BABBLE)
726 return -EOVERFLOW;
727 else if (status & QTD_STS_RCE)
728 return -ETIME;
729 return -EPIPE;
731 if (usb_pipein(urb->pipe)
732 && (urb->transfer_flags & URB_SHORT_NOT_OK)
733 && urb->actual_length < urb->transfer_buffer_length)
734 return -EREMOTEIO;
735 return 0;
739 * process_inactive_qtd - process an inactive (but not halted) qTD.
741 * Update the urb with the transfer bytes from the qTD, if the urb is
742 * completely transferred or (in the case of an IN only) the LPF is
743 * set, then the transfer is complete and the urb should be returned
744 * to the system.
746 void process_inactive_qtd(struct whc *whc, struct whc_qset *qset,
747 struct whc_qtd *qtd)
749 struct whc_std *std = list_first_entry(&qset->stds, struct whc_std, list_node);
750 struct urb *urb = std->urb;
751 uint32_t status;
752 bool complete;
754 status = le32_to_cpu(qtd->status);
756 urb->actual_length += std->len - QTD_STS_TO_LEN(status);
758 if (usb_pipein(urb->pipe) && (status & QTD_STS_LAST_PKT))
759 complete = true;
760 else
761 complete = whc_std_last(std);
763 qset_remove_qtd(whc, qset);
764 qset_free_std(whc, std);
767 * Transfers for this URB are complete? Then return it to the
768 * USB subsystem.
770 if (complete) {
771 qset_remove_qtds(whc, qset, urb);
772 qset_remove_urb(whc, qset, urb, get_urb_status_from_qtd(urb, status));
775 * If iAlt isn't valid then the hardware didn't
776 * advance iCur. Adjust the start and end pointers to
777 * match iCur.
779 if (!(status & QTD_STS_IALT_VALID))
780 qset->td_start = qset->td_end
781 = QH_STATUS_TO_ICUR(le16_to_cpu(qset->qh.status));
782 qset->pause_after_urb = NULL;
787 * process_halted_qtd - process a qset with a halted qtd
789 * Remove all the qTDs for the failed URB and return the failed URB to
790 * the USB subsystem. Then remove all other qTDs so the qset can be
791 * removed.
793 * FIXME: this is the point where rate adaptation can be done. If a
794 * transfer failed because it exceeded the maximum number of retries
795 * then it could be reactivated with a slower rate without having to
796 * remove the qset.
798 void process_halted_qtd(struct whc *whc, struct whc_qset *qset,
799 struct whc_qtd *qtd)
801 struct whc_std *std = list_first_entry(&qset->stds, struct whc_std, list_node);
802 struct urb *urb = std->urb;
803 int urb_status;
805 urb_status = get_urb_status_from_qtd(urb, le32_to_cpu(qtd->status));
807 qset_remove_qtds(whc, qset, urb);
808 qset_remove_urb(whc, qset, urb, urb_status);
810 list_for_each_entry(std, &qset->stds, list_node) {
811 if (qset->ntds == 0)
812 break;
813 qset_remove_qtd(whc, qset);
814 std->qtd = NULL;
817 qset->remove = 1;
820 void qset_free(struct whc *whc, struct whc_qset *qset)
822 dma_pool_free(whc->qset_pool, qset, qset->qset_dma);
826 * qset_delete - wait for a qset to be unused, then free it.
828 void qset_delete(struct whc *whc, struct whc_qset *qset)
830 wait_for_completion(&qset->remove_complete);
831 qset_free(whc, qset);